首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 656 毫秒
1.
In this paper, a multi-method approach for the assessment of the stability of natural slopes and landslide hazard mapping applied to the Dakar coastal region is presented. This approach is based on the effective combination of geotechnical field and laboratory works, of GIS, and of mechanical (deterministic and numerical) stability analysis. By using this approach, valuable results were gained regarding instability factors, landslide kinematics, simulation of slope failure and coastal erosion. This led to a thorough assessment and strong reduction in the subjectivity of the slope stability and hazard assessment and to the development of an objective landslide danger map of the SW coast of Dakar. Analysis of the results shows that the slides were influenced by the geotechnical properties of the soil, the weathering, the hydrogeological situation, and the erosion by waves. The landslide susceptibility assessment based on this methodological approach has allowed for an appropriate and adequate consideration of the multiple factors affecting the stability and the optimization of planning and investment for land development in the city.  相似文献   

2.
Modeling landslide recurrence in Seattle, Washington, USA   总被引：5，自引：0，他引：5  
To manage the hazard associated with shallow landslides, decision makers need an understanding of where and when landslides may occur. A variety of approaches have been used to estimate the hazard from shallow, rainfall-triggered landslides, such as empirical rainfall threshold methods or probabilistic methods based on historical records. The wide availability of Geographic Information Systems (GIS) and digital topographic data has led to the development of analytic methods for landslide hazard estimation that couple steady-state hydrological models with slope stability calculations. Because these methods typically neglect the transient effects of infiltration on slope stability, results cannot be linked with historical or forecasted rainfall sequences. Estimates of the frequency of conditions likely to cause landslides are critical for quantitative risk and hazard assessments. We present results to demonstrate how a transient infiltration model coupled with an infinite slope stability calculation may be used to assess shallow landslide frequency in the City of Seattle, Washington, USA. A module called CRF (Critical RainFall) for estimating deterministic rainfall thresholds has been integrated in the TRIGRS (Transient Rainfall Infiltration and Grid-based Slope-Stability) model that combines a transient, one-dimensional analytic solution for pore-pressure response to rainfall infiltration with an infinite slope stability calculation. Input data for the extended model include topographic slope, colluvial thickness, initial water-table depth, material properties, and rainfall durations. This approach is combined with a statistical treatment of rainfall using a GEV (General Extreme Value) probabilistic distribution to produce maps showing the shallow landslide recurrence induced, on a spatially distributed basis, as a function of rainfall duration and hillslope characteristics.  相似文献   

3.
We present the methodologies adopted and the outcomes obtained in the analysis of landslide risk in the basin of the Arno River (Central Italy) in the framework of a project sponsored by the Basin Authority of the Arno River, started in the year 2002 and completed at the beginning of 2005. In particular, a complete set of methods and applications for the assessment of landslide susceptibility and risk are described and discussed. A new landslide inventory of the whole area was realized, using conventional (aerial-photo interpretation and field surveys) and non-conventional methods (e.g. remote sensing techniques such as DInSAR and PS-InSAR). The great majority of the mapped mass movements are rotational slides (75%), solifluctions and other shallow slow movements (17%) and flows (5%), while soil slips, and other rapid landslides, seem less frequent everywhere within the basin. The relationships between landslide characteristics and environmental factors have been assessed through statistical analysis. As expected, the results show a strong control of land cover, lithology and morphology on landslide occurrence. The landslide frequency-size distribution shows a typical scaling behaviour already underlined in other landslide inventories worldwide. The assessment of landslide hazard in terms of probability of occurrence in a given time, based for mapped landslides on direct and indirect observations of the state of activity and recurrence time, has been extended to landslide-free areas through the application of statistical methods implemented in an artificial neural network (ANN). Unique conditions units (UCU) were defined by the map overlay of landslide preparatory factors (lithology, land cover, slope gradient, slope curvature and upslope contributing area) and afterwards used to construct a series of model vectors for the training and test of the ANN. Various different ANNs were selected throughout the basin, until each UCU was assigned a degree of membership to a susceptibility and a hazard class. Model validation confirms that prediction results are very good, with an average percentage of correctly recognized mass movements of about 85%. The analysis also revealed the existence of a large number of unmapped mass movements, thus contributing to the completeness of the final inventory. Temporal hazard was estimated via the translation of state of activity in recurrence time and hence probability of occurrence. The following intersection of hazard values with vulnerability and exposure figures, obtained by reclassification of digital vector mapping at 1:10,000 scale, lead to the definition of risk values for each terrain unit for different periods of time into the future. The final results of the research are now undergoing a process of integration and implementation within land planning and risk prevention policies and practices at local and national level.  相似文献   

4.
A logistic regression model is developed within the framework of a Geographic Information System (GIS) to map landslide hazards in a mountainous environment. A case study is conducted in the mountainous southern Mackenzie Valley, Northwest Territories, Canada. To determine the factors influencing landslides, data layers of geology, surface materials, land cover, and topography were analyzed by logistic regression analysis, and the results are used for landslide hazard mapping. In this study, bedrock, surface materials, slope, and difference between surface aspect and dip direction of the sedimentary rock were found to be the most important factors affecting landslide occurrence. The influence on landslides by interactions among geologic and geomorphic conditions is also analyzed, and used to develop a logistic regression model for landslide hazard mapping. The comparison of the results from the model including the interaction terms and the model not including the interaction terms indicate that interactions among the variables were found to be significant for predicting future landslide probability and locating high hazard areas. The results from this study demonstrate that the use of a logistic regression model within a GIS framework is useful and suitable for landslide hazard mapping in large mountainous geographic areas such as the southern Mackenzie Valley.  相似文献   

5.
Loss of life and property caused by landslides triggered by extreme rainfall events demonstrates the need for landslide-hazard assessment in developing countries where recovery from such events often exceeds the country's resources. Mapping landslide hazards in developing countries where the need for landslide-hazard mitigation is great but the resources are few is a challenging, but not intractable problem. The minimum requirements for constructing a physically based landslide-hazard map from a landslide-triggering storm, using the simple methods we discuss, are: (1) an accurate mapped landslide inventory, (2) a slope map derived from a digital elevation model (DEM) or topographic map, and (3) material strength properties of the slopes involved. Provided that the landslide distribution from a triggering event can be documented and mapped, it is often possible to glean enough topographic and geologic information from existing databases to produce a reliable map that depicts landslide hazards from an extreme event. Most areas of the world have enough topographic information to provide digital elevation models from which to construct slope maps. In the likely event that engineering properties of slope materials are not available, reasonable estimates can be made with detailed field examination by engineering geologists or geotechnical engineers. Resulting landslide hazard maps can be used as tools to guide relocation and redevelopment, or, more likely, temporary relocation efforts during severe storm events such as hurricanes/typhoons to minimize loss of life and property. We illustrate these methods in two case studies of lethal landslides in developing countries: Tegucigalpa, Honduras (during Hurricane Mitch in 1998) and the Chuuk Islands, Micronesia (during Typhoon Chata'an in 2002).  相似文献   

6.
On 19 February 2007, a landslide occurred on the Alaard?ç Slope, located 1.6 km south of the town of Yaka (Gelendost, Turkey.) Subsequently, the displaced materials transformed into a mud flow in E?lence Creek and continued 750 m downstream towards the town of Yaka. The mass poised for motion in the Yaka Landslide source area and its vicinity, which would be triggered to a kinetic state by trigger factors such as heavy or sustained rainfall and/or snowmelt, poise a danger in the form of loss of life and property to Yaka with its population of 3,000. This study was undertaken to construct a susceptibility mapping of the vicinity of the Yaka Landslide’s source area and to relate it to movement of the landslide mass with the goal of prevention or mitigation of loss of life and property. The landslide susceptibility map was formulated by designating the relationship of the effecting factors that cause landslides such as lithology, gradient, slope aspect, elevation, topographical moisture index, and stream power index to the landslide map, as determined by analysis of the terrain, through the implementation of the conditional probability method. It was determined that the surface area of the Goksogut formation, which has attained lithological characteristics of clayey limestone with a broken and separated base and where area landslides occur, possesses an elevation of 1,100–1,300 m, a slope gradient of 15 °–35 ° and a slope aspect between 0 °–67.5 ° and 157 °–247 °. Loss of life and property may be avoided by the construction of structures to check the debris mass in E?lence Creek, the cleaning of the canal which passes through Yaka, the broadening of the canal’s base area, elevating the protective edges along the canal and the establishment of a protective zone at least 10-m wide on each side of the canal to deter against damage from probable landslide occurrence and mud flow.  相似文献   

7.
Probabilistic landslide hazards and risk mapping on Penang Island, Malaysia   总被引：15，自引：0，他引：15  
This paper deals with landslide hazards and risk analysis of Penang Island, Malaysia using Geographic Information System (GIS) and remote sensing data. Landslide locations in the study area were identified from interpretations of aerial photographs and field surveys. Topographical/geological data and satellite images were collected and processed using GIS and image processing tools. There are ten landslide inducing parameters which are considered for landslide hazard analysis. These parameters are topographic slope, aspect, curvature and distance from drainage, all derived from the topographic database; geology and distance from lineament, derived from the geologic database; landuse from Landsat satellite images; soil from the soil database; precipitation amount, derived from the rainfall database; and the vegetation index value from SPOT satellite images. Landslide susceptibility was analyzed using landslide-occurrence factors employing the probability-frequency ratio model. The results of the analysis were verified using the landslide location data and compared with the probabilistic model. The accuracy observed was 80.03%. The qualitative landslide hazard analysis was carried out using the frequency ratio model through the map overlay analysis in GIS environment. The accuracy of hazard map was 86.41%. Further, risk analysis was done by studying the landslide hazard map and damageable objects at risk. This information could be used to estimate the risk to population, property and existing infrastructure like transportation network.  相似文献   

8.
A rainfall-induced shallow landslide is a major hazard in mountainous terrain, but a time-space based approach is still an unsettled issue for mapping rainfall-induced shallow landslide hazards. Rain induces a rise of the groundwater level and an increase in pore water pressure that results in slope failures. In this study, an integrated infinite slope analysis model has been developed to evaluate the influence of infiltration on surficial stability of slopes by the limit equilibrium method. Based on this new integrated infinite slope analysis model, a time-space based approach has been implemented to map the distributed landslide hazard in a GIS (Geographic Information Systems) and to evaluate the shallow slope failure induced by a particular rainfall event that accounts for the rainfall intensity and duration. The case study results in a comprehensive time-space landslide hazard map that illustrates the change of the safety factor and the depth of the wetting front over time.  相似文献   

9.
A landslide database for Nicaragua: a tool for landslide-hazard management   总被引：3，自引：1，他引：3  
A digital landslide database has been created for Nicaragua to provide the scientific community and national authorities with a tool for landslide-hazard assessment, emergency management, land-use planning, development of early warning systems, and the implementation of public and private policies. The Instituto Nicaragüense de Estudios Territoriales (Nicaraguan Geosciences Institute, INETER) began to compile the database in a digital format in 2003 as part of a comprehensive geographical information system for all types of geohazards. Landslide data have been obtained from a variety of sources including newspapers, technical reports, and landslide inventory maps. Inventory maps are largely based on fieldwork and aerial-photo analyses conducted by foreign development agencies in collaboration with INETER and other Nicaraguan institutions. This paper presents the sources of landslide information, introduces the database, and presents the first analyses of the data at national and regional scales. The database currently contains spatial information for about 17,000 landslides that occurred in mountainous and volcanic terrains. Information is mainly recorded for the period 1826–2003, with a large number of events that occurred during the disastrous Hurricane Mitch in October 1998. The oldest historical event is dated at 1570, some events are recorded as prehistorical, and other events have unknown dates of occurrence. Debris flows have been the most common types of landslides, both in volcanic and nonvolcanic areas, but other types, including rockfalls and slides, have also been identified. Intense and prolonged rainfall, often associated with tropical cyclones, and seismic and volcanic activity represent the most important landslide triggers. At a regional scale, the influence of topographic (elevation, slope angle, slope aspect) and lithologic parameters on the occurrence of landslides was analyzed. The development of the database allowed us to define the state of knowledge on landslide processes in the Nicaragua and to provide a preliminary identification of areas affected by landslides.  相似文献   

10.
An analysis of landslide occurrence in the low permeability terrain of Porretta-Vergato, Italy, related to prolonged rainfall patterns is presented. Data sets collected over nearly a century are statistically analysed. The pattern of the landslide hazard is considered and related to precipitation at the basin scale in order to enhance the understanding between the two parameters and assess their temporal changes, as well as interrelationships. Landslide incidence generally follows the periodic pattern of precipitation with a lag of approximately six months, which is believed to relate to the time necessary for the ground water to reach a critical level to initiate slope failure. There also appears to be a two-stage pattern of precipitation which induces most landslides: a preparatory period, where the landslide is destabilized and conditioned for slope failure, followed by a more intense period of rainfall that triggers or provokes the event. These initial findings point to the need for further studies to verify such unstable situations.  相似文献   

11.
This study applied, tested and compared a probability model, a frequency ratio and statistical model, a logistic regression to Damre Romel area, Cambodia, using a geographic information system. For landslide susceptibility mapping, landslide locations were identified in the study area from interpretation of aerial photographs and field surveys, and a spatial database was constructed from topographic maps, geology and land cover. The factors that influence landslide occurrence, such as slope, aspect, curvature and distance from drainage were calculated from the topographic database. Lithology and distance from lineament were extracted and calculated from the geology database. Land cover was classified from Landsat TM satellite imagery. The relationship between the factors and the landslides was calculated using frequency ratio and logistic regression models. The relationships, frequency ratio and logistic regression coefficient were overlaid to make landslide susceptibility map. Then the landslide susceptibility map was compared with known landslide locations and tested. As the result, the frequency ratio model (86.97%) and the logistic regression (86.37%) had high and similar prediction accuracy. The landslide susceptibility map can be used to reduce hazards associated with landslides and to land cover planning.  相似文献   

12.
Kat County, which is located in a slope of hilly region and constructed in the side of a mountain along the North Anatolian Fault Zone, is frequently subject to landslides. The slides occur during periods of heavy rainfall, and these events cause destruction to property, roads, agricultural lands and buildings. In the last few decades, a lot of houses and buildings have been damaged and destroyed. Settlement areas have remained evacuated for a long time. The slope instabilities in the study area are a complex landslide extending from north to south containing a lot of landslides. Field investigations, interpretation of aerial photography, analyses of geological data and laboratory tests suggest that some factors have acted together on the slopes to cause the sliding. In the wet season, the slopes became saturated. As the saturation of the earth material on the slope causesa rise in water pressure, the shear strength (resisting forces) decreases and the weight (driving forces) increases; thus, the net effect was to lower the safety factor. Previous failures have affected the rock mass, leading to the presence of already sheared surfaces at residual strengths. The relation between the joint planes and the instability of the slope in the study area was discussed and it was found that the potential slope instabilities are mainly in the directions of NW–SE, NE–SW and N–S. The landslide susceptibility map obtained by using the geographical information system showed that a large area is susceptible and prone to landslides in the northern part of the study area.An erratum to this article can be found at  相似文献   

13.
Slope instability research and susceptibility mapping is a fundamental component of hazard management and an important basis for provision of measures aimed at decreasing the risk of living with landslides. On this basis, this paper presents the result of a comprehensive study on slope stability analyses and landslide susceptibility mapping carried out in part of Sado Island of Japan. Various types of landslides occurred in the island throughout history. Little is known about the triggering factors and severity of old landslides, but for many of the recent slope failures, the slope characteristics and stratigraphy are such that ground surfaces retain water perennially and landslides occur when additional moisture is induced during rainfall and snowmelt. A range of methods are available in literature for preparation of landslide susceptibility maps. In this study we used two methods namely, the analytical hierarchy process (AHP) and logistic regression, to produce and later compare two susceptibility maps. AHP is a semi-qualitative method, which involves a matrix-based pair-wise comparison of the contribution of different factors for landsliding. Logistic regression on the other hand promotes a multivariate statistical analysis with an objective to find the best-fitting model that describes the relationship between the presence or absence of landslides (dependent variable) and a set of causal factors (independent parameters). Elevation, lithology and slope gradient were casual factors in this study. The determinations of factor weights by AHP and logistic regression were preceded by the calculation of class weights (landslide densities) based on bivariate statistical analyses (BSA). The differences between the AHP derived susceptibility map and the logistic regression counterpart are relatively minor when broad-based classifications are considered. However, with an increase in the number of susceptibility classes, the logistic regression map gave more details but the one derived by AHP failed to do so. The reason is that the majority of pixels in the AHP map have high values, and an increase in the number of classes gives little change in the spatial distribution of susceptibility zones in the middle. To verify the practicality of the two susceptibility maps, both of them were compared with a landslide activity map containing 18 active landslide zones. The outcome was that the active landslide zones do not completely fit into the very high susceptibility class of both maps for various reasons. But 70% of these landslide zones fall into the high and very high susceptibility zones of the AHP map while this is 63% in the case of logistic regression. This indicates that despite the skewed distribution of susceptibility indices, the AHP map was better to capture the reality on the ground than the logistic regression equivalent.  相似文献   

14.
This paper presents a methodology for developing a landslide hazard zonation map by integration of global positioning system (GPS), geographic information system (GIS), and remote sensing (RS) for Western Himalayan Kaghan Valley of Pakistan. The landslides in the study area have been located and mapped by using GPS. Eleven causative factors such as landuse, elevation, geology, rainfall intensity, slope inclination, soil, slope aspect, distances from main road, distances from secondary roads, and distances from main river and those from trunk streams were analyzed for occurrence of landslides. These factors were used with a modified form of pixel-based information value model to obtain landslide hazard zones. The matrix analysis was performed in remote sensing to produce a landslide hazard zonation map. The causative factors with the highest effect of landslide occurrence were landuse, rainfall intensity, distances from main road, distances from secondary roads, and distances from main river and those from trunk streams. In conclusion, we found that landslide occurrence was only in moderate, high, or very high hazard zones, and no landslides were in low or very low hazard zones showing 100% accuracy of our results. The landslide hazard zonation map showed that the current main road of the valley was in the zones of high or very high hazard. Two new safe road routes were suggested by using the GIS technology.  相似文献   

15.
This paper describes the potential applicability of a hydrological–geotechnical modeling system using satellite-based rainfall estimates for a shallow landslide prediction system. The physically based distributed model has been developed by integrating a grid-based distributed kinematic wave rainfall-runoff model with an infinite slope stability approach. The model was forced by the satellite-based near real-time half-hourly CMORPH global rainfall product prepared by NOAA-CPC. The method combines the following two model outputs necessary for identifying where and when shallow landslides may potentially occur in the catchment: (1) the time-invariant spatial distribution of areas susceptible to slope instability map, for which the river catchment is divided into stability classes according to the critical relative soil saturation; this output is designed to portray the effect of quasi-static land surface variables and soil strength properties on slope instability and (2) a produced map linked with spatiotemporally varying hydrologic properties to provide a time-varying estimate of susceptibility to slope movement in response to rainfall. The proposed hydrological model predicts the dynamic of soil saturation in each grid element. The stored water in each grid element is then used for updating the relative soil saturation and analyzing the slope stability. A grid of slope is defined to be unstable when the relative soil saturation becomes higher than the critical level and is the basis for issuing a shallow landslide warning. The method was applied to past landslides in the upper Citarum River catchment (2,310 km2), Indonesia; the resulting time-invariant landslide susceptibility map shows good agreement with the spatial patterns of documented historical landslides (1985–2008). Application of the model to two recent shallow landslides shows that the model can successfully predict the effect of rainfall movement and intensity on the spatiotemporal dynamic of hydrological variables that trigger shallow landslides. Several hours before the landslides, the model predicted unstable conditions in some grids over and near the grids at which the actual shallow landslides occurred. Overall, the results demonstrate the potential applicability of the modeling system for shallow landslide disaster predictions and warnings.  相似文献   

16.
A landslide susceptibility zonation (LSZ) map helps to understand the spatial distribution of slope failure probability in an area and hence it is useful for effective landslide hazard mitigation measures. Such maps can be generated using qualitative or quantitative approaches. The present study is an attempt to utilise a multivariate statistical method called binary logistic regression (BLR) analysis for LSZ mapping in part of the Garhwal Lesser Himalaya, India, lying close to the Main Boundary Thrust (MBT). This method gives the freedom to use categorical and continuous predictor variables together in a regression analysis. Geographic Information System has been used for preparing the database on causal factors of slope instability and landslide locations as well as for carrying out the spatial modelling of landslide susceptibility. A forward stepwise logistic regression analysis using maximum likelihood estimation method has been used in the regression. The constant and the coefficients of the predictor variables retained by the regression model have been used to calculate the probability of slope failure for the entire study area. The predictive logistic regression model has been validated by receiver operating characteristic curve analysis, which has given 91.7% accuracy for the developed BLR model.  相似文献   

17.
The article deals with a tool for landslides susceptibility assessment as a function of the hydrogeological setting at different scales. The study has been applied to a test area located in Southern Italy. First, a 3D groundwater flow model was implemented for a large-scale area. The simulation of several groundwater conditions compared with the landslide activity map allows drawing a hydrogeological susceptibility map. Then, a slope scale analysis was carried out for the Cavallerizzo landslide. For this purpose, a 2D groundwater parametrical modeling was coupled with a slope stability analysis; the simulation was carried out by changing the values of the main hydrogeological parameters (recharge, groundwater supply level, etc.). The results enabled to connect the slope instability to some hydrogeological characteristics that are easy to survey and to monitor (e.g., rainfall, piezometrical level, and spring discharge), pointing out the hazard thresholds with regards to different triggering phenomena.  相似文献   

18.
《Engineering Geology》2004,73(3-4):193
In two events, on November 15 and 17, 2000, near the Mangart Mountain (2679 m a.s.l.), NW Slovenia, two translational landslides (debris flow slides) with a total volume of more than 1.5 million m3 occurred on the Sto e slope composed of morainic material filled with silt fraction. The first landslide was associated with a dry and the second landslide with a wet debris-flow, respectively. The rain gauging station in the village of Log pod Mangartom recorded 1638.4 mm of rainfall (more than 60% of the average annual precipitation) in the 48 days before the events (rainfall intensity of 1.42 mm/h in 1152 h). The recorded rainfall depth has a recurrence interval of more than 100 years. Other recorded rainfall depths of shorter duration (481.6 mm in 7 days, 174.0 mm in 24 h, 70 mm in 1 h) have recurrence intervals of much less than 100 years. A hydrological analysis of the event showed that the increase in runoff coefficients during the wet period in autumn 2000 before the landslide was as high as two- to threefold. An analysis using natural isotopes of δ18O and tritium of water samples from the Sto e landslide area has shown permanent but slow exfiltration of underground waters from a reservoir in the slope. In the case of low-intensity and long-duration rainfall in autumn 2000, relatively low permeable (10−7 m/s) morainic material was nearly saturated but remained stable (average porosity 21%, water content 20%, liquid limit 25%) until high artesian pressures up to 100 m developed in the slope by slow exfiltration from the relatively high permeable (10−5 m/s) massive dolomite. The Sto e landslide (two debris flow slides) was triggered by high artesian pressures built in the slope after long-duration rainfall. The devastating debris-flows formed from the landslide masses by infiltration of rainfall and surface runoff into the landslide masses and by their liquefaction.  相似文献   

19.
To prepare a landslide susceptibility map is essential to identify hazardous regions, construct appropriate mitigation facilities, and plan emergency measures for a region prone to landslides triggered by rainfall. The conventional mapping methods require much information about past landslides records and contributing terrace and rainfall. They also rely heavily on the quantity and quality of accessible information and subjectively of the map builder. This paper contributes to a systematic and quantitative assessment of mapping landslide hazards over a region. Geographical Information System is implemented to retrieve relevant parameters from data layers, including the spatial distribution of transient fluid pressures, which is estimated using the TRIGRS program. The factor of safety of each pixel in the study region is calculated analytically. Monte Carlo simulation of random variables is conducted to process the estimation of fluid pressure and factor of safety for multiple times. The failure probability of each pixel is thus estimated. These procedures of mapping landslide potential are demonstrated in a case history. The analysis results reveal a positive correlation between landslide probability and accumulated rainfall. This approach gives simulation results compared to field records. The location and size of actual landslide are well predicted. An explanation for some of the inconsistencies is also provided to emphasize the importance of site information on the accuracy of mapping results.  相似文献   

20.
The purpose of this study is the development, application, and assessment of probability and artificial neural network methods for assessing landslide susceptibility in a chosen study area. As the basic analysis tool, a Geographic Information System (GIS) was used for spatial data management and manipulation. Landslide locations and landslide-related factors such as slope, curvature, soil texture, soil drainage, effective thickness, wood type, and wood diameter were used for analyzing landslide susceptibility. A probability method was used for calculating the rating of the relative importance of each factor class to landslide occurrence. For calculating the weight of the relative importance of each factor to landslide occurrence, an artificial neural network method was developed. Using these methods, the landslide susceptibility index (LSI) was calculated using the rating and weight, and a landslide susceptibility map was produced using the index. The results of the landslide susceptibility analysis, with and without weights, were confirmed from comparison with the landslide location data. The comparison result with weighting was better than the results without weighting. The calculated weight and rating can be used to landslide susceptibility mapping.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号