共查询到20条相似文献，搜索用时 132 毫秒
1.
本文记述了2004年发现于甘肃兰州盆地下白垩统河口群一个化石点的蜥脚类恐龙化石。新标本的荐椎独特，神经脊非常低并在其顶端横向扩展，代表蜥脚类恐龙一新属种：刘家峡黄河巨龙。分支系统分析发现黄河巨龙为一原始巨龙型类蜥脚类。 相似文献
2.
首次在山西新荣地区晚白垩世助马堡组发现了巨型蜥脚类恐龙股骨化石。通过详细观测该股骨化石的保存状态、保存长度和股骨近端最大长度,估算该股骨化石实际长度约1.9 m,该蜥脚类恐龙体长可能超过30.0 m。在对化石层沉积相和古流向分析的基础上,分析了该股骨化石的埋藏环境。助马堡组为一套规模大、弯曲度高、水动力强的曲流河沉积,该蜥脚类恐龙死后在曲流河中经短—中距离搬运后被埋藏。新荣地区巨型蜥脚类恐龙股骨化石的发现,不仅扩大了晚白垩世巨型蜥脚类恐龙在中国北方地区的分布范围,同时对左云—新荣地区白垩纪古气候和古环境的研究具有重要意义。 相似文献
3.
蜥脚类恐龙是中生代时期陆地上最大的动物,作为广泛分布于侏罗纪和白垩纪的一种进化十分成功的恐龙,蜥脚类足迹也是分布较广,从早侏罗世到晚白垩世的地层中都有发现。诸城地区南部皇龙沟莱阳群、北部张祝河湾及棠棣戈庄大盛群中发现了三处早白垩世时期数量不等的恐龙足迹化石,这三处化石点都发现了蜥脚类的恐龙足迹化石。诸城地区三处的蜥脚类恐龙足迹之间有什么异同呢?这些足迹的造迹者都属于同一种蜥脚类恐龙吗?本文在大量的数据统计基础上,根据前后足的面积比对蜥脚类足迹进行了初步分类,推测早白垩世早期的皇龙沟及早白垩世晚期的棠棣戈庄都至少生活有两种不同的蜥脚类恐龙,证实了蜥脚类群居生活的特性。对三处不同时期蜥脚类恐龙体型的对比总结出蜥脚类体型趋小化的演化趋势,并分析认为环境的变化是演化的动力机制。对白垩纪恐龙物种的更替,古环境变化等多方面问题进行了探讨。 相似文献
4.
兰州—民和盆地位于中国西北横跨甘肃和青海两省的毗连地区,其中广泛发育出露良好下白垩统河口群。近年来,在该盆地东部的兰州盆地产出了一个前所未知的脊椎动物组合,其中以诸多的足印化石和世界已知最大牙齿的植食性恐龙——巨齿兰州龙(Lanzhousaurus magnidens)为代表,还包括一类宽臀的基干巨龙型类蜥脚类——刘家峡黄河巨龙(Huanghetitan liujiaxiaensis),以及许多其他尚未发表的恐龙、鱼类和龟类。本文报道在该地区河口群中所发现的第二种新的蜥脚类恐龙——炳灵大夏巨龙(新属新种)(Daxiatitan binglingi gen.et sp.nov.)。炳灵大夏巨龙的正型标本现存于甘肃省地矿局第三地质矿产勘查院古生物研究开发中心(兰州)。该标本包括最后的10枚颈椎,10枚背椎,2枚近端尾椎,部分颈肋和背肋,1枚脉弓,右肩胛骨,右乌喙骨和右股骨。估计其颈部长度为12.2m,整个身体长度为26m,使其成为中国乃至亚洲最大的恐龙之一。大夏巨龙是巨龙类的一个基干分子[其支干定义为:与盐龙(Saltasaurus)而不与腕龙(Brachiosaurus)更具亲缘关系的巨龙型类],其以如下特征区别于其他巨龙类分子:颈椎的前关节面后移;肩胛骨骨体的远缘与其长轴斜交;股骨远端髁相对于股骨体向背侧方倾斜10°,而且从远端看,该远端髁处于后内—前侧方向。大夏巨龙独特的股骨构造指示出一种强烈外撇的走步姿态。同时,这种姿态也得到了保存于刘家峡恐龙国家地质公园同一层位(河口群上段)的强烈外转的、宽间距的蜥脚类恐龙行迹的进一步佐证。炳灵大夏巨龙的发现丰富了兰州盆地脊椎动物组合,对研究巨龙类恐龙的起源和早期演化具有重要意义。 相似文献
5.
报道了在宁夏固原首次发现的恐龙足迹化石。该恐龙足迹化石分别为鸟脚类恐龙足迹和蜥脚类恐龙足迹,均发现于早白垩世李洼峡组沉积地层中。其中的鸟脚类恐龙足迹命名为六盘山宁夏足印 ( Ningxiapus liupanshanensis ichnogenus et inchnosp． nov． ) 。六盘山宁夏足印长与宽之比为1. 22; 第I 趾纤细,短于第IV 趾; 第II 趾与第III 趾之间夹角为35°,第III 趾与第IV 趾之间夹角为45° 等特征区别于其他鸟脚类恐龙脚印。新发现的蜥脚类恐龙以足迹化石形式保存,其前、后足印的长度大小分别为36 cm 和15 cm,应为中等大小的蜥脚类恐龙所留下。这些恐龙足迹化石的发现,为研究该地区的古生物地理及古生态的恢复以及为将来在该地区发现恐龙骨骼化石提供重要信息。 相似文献
6.
7.
记述了产自河南汝阳盆地早白垩世晚期相互关联的禽龙类9个中前部尾椎椎体化石。由于化石只保存不完整的尾椎部分,其属种难以断定。但它的发现说明,汝阳巨型蜥脚类恐龙动物群中,除了植食性的大型蜥脚类恐龙外,也存在大型鸟脚类恐龙——禽龙类。保存的尾椎椎体系列与发现于比利时的早白垩世贝尼萨尔禽龙相比,不论是大小还是形态构造上均极为相似,从而判断这9个连续的尾椎体分别为第7到第15尾椎。进而推断,河南汝阳盆地产出巨型蜥脚类恐龙动物群化石的沉积地层形成于早白垩世晚期。 相似文献
8.
9.
梁会娟 《地质灾害与环境保护》2009,20(4):53-57
河南汝阳恐龙化石群位于汝阳县东南15km处,主要分布在蟒川组地层中。恐龙化石的发现对研究巨型蜥脚类恐龙的分布、迁徙等方面具有重要科学价值。这些恐龙化石分布面积大,埋藏浅,已经受到自然和人为的破坏,为了有效保护这些珍贵的地质遗迹,提出了对恐龙化石的保护对策。 相似文献
10.
甘肃省永靖县盐锅峡发现大型蜥脚类恐龙足迹 总被引：1，自引：1，他引：1
甘肃永靖盐锅峡下白垩统河口群盐锅峡组发现大量恐龙足迹化石 .初步调查发现了 10个化石点 2 93个足印化石 .其中在 1号点 6 0 0m2 的发掘面上 ,保存有 7组蜥脚类 138个足印、9组兽脚类 6 0个足印、1组鸟脚类 3个脚印和 1组翼龙类 11个足印 .7组蜥脚类足印形成4组保存完好的行迹和 3组的足迹组合 .最大的蜥脚类足印化石前脚 790mm× 112 0mm ,后脚 15 0 0mm× 14 2 0mm ,是目前发现的世界上最大的恐龙足印之一 .盐锅峡蜥脚类恐龙足迹可以分为 3种类型 :第 1类足迹前脚为新月形 ,后脚为椭圆形 ,前后足印不重合并均向外偏转 ;第 2类足迹前脚为半圆形 ,后脚为椭圆形 ,前后足印部分重合 ,后脚印向外偏转 ;第 3类足迹前脚半圆形 ,后脚U形 ,前后足印明显分离并均向外偏转 .蜥脚类恐龙足迹向外偏转反映恐龙成“外八字”型行走 ,这种行进方式可能与其巨大的体重有关 .根据计算 ,盐锅峡蜥脚类恐龙臀高最小为 3.0 4m ,最大可达到 5 .3m .恐龙行走的速度 2 .3～ 3.4km/h .古环境、古地理分析认为白垩纪甘肃兰州—青海民和一带为一内陆淡水湖盆 .盐锅峡一带的恐龙足迹化石就发现于最近湖中心的“雾宿山古岛”西侧湖岸上 .虽然白垩纪当地气候并不湿润 ,但湖岸地区草肥水美 ,是恐龙及其他陆生生物的乐园 . 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
13.
14.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
15.
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
19.
20.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献