首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 484 毫秒
1.
祁连造山带处在特提斯构造域的北缘,经历了早古生代原特提斯洋发育以来的构造演化,是青藏高原东北缘高原隆升与扩展的关键构造带。本文依据区域地质调查与构造地质填图,结合前人地球物理场资料,阐述了中国西北和祁连造山带断裂构造体系特征。通过超宽频大地电磁测深(MT)剖面数据采集处理,以及浅、中—深层电性剖面反演与构造解释,分析了祁连造山带全地壳深部结构特征与盆山耦合关系,揭示了原特提斯洋构造域北祁连洋板块向南和向北进行双向俯冲的化石俯冲带深部结构特征;俯冲消减的北祁连洋板块的宽度约在600 km以上。其中,北祁连洋向南在柴达木—祁连地块之下的俯冲作用角度较缓,俯冲带向南延伸的距离较远,其俯冲断离的板片可以达到现今柴达木盆地的北缘;北祁连洋向北的俯冲作用产状较陡,其俯冲断离的板片具有向南陡倾的产状倒转特征,可能与中生代以来、特别是印度—亚洲大陆碰撞的远程效应引起的挤压构造变形有关。大地电磁测深剖面的浅层反演与构造解释,验证了祁连山北缘断裂以北发育的榆木山逆冲推覆构造,榆木山构成飞来峰构造,将早白垩世酒泉盆地的一个分支掩盖在外来的逆冲推覆体之下;飞来峰之下具有油气勘查前景。根据早白垩世晚期普遍发育的伸展作用,限定榆木山逆冲推覆构造发育的时间在早白垩世早期,从而提供了青藏高原北缘早白垩世早期高原隆升与扩展的证据。综合前人资料和本研究成果,建立了祁连造山带自新元古代以来的构造演化概念模型。  相似文献   

2.
Mélanges occur as discontinuous, mappable, units along an extensive N–S-trending, steeply dipping zone of distributed shear in metamorphic complexes along the coast of central Chile. Large mélange zones, from north to south, near Chañaral, Los Vilos, Pichilemu, and Chiloé Island, contain variations in lithologic and structural detail, but are consistent in exhibiting cross-cutting fabric features indicating a progressive transition from earlier ductile to more brittle deformation. In the Infiernillo mélange near Pichilemu, Permian to Early Triassic, sub-horizontal schistosity planes of the Western Series schist are disrupted, incorporated into, and uplifted along high-angle, N–S- to NNE–SSW-trending brittle–ductile shears. Mylonitic and cataclastic zones within the mélange matrix indicate active lateral shear during cumulative exhumation from depths exceeding 12 km in some areas. Exotic lithologies, such as Carboniferous mafic amphibolite and blueschist, formed during earlier Gondwanide subduction, match well with similar rocks in the Bahia Mansa to Los Pabilos region 750 km to the south, suggesting possible dextral offset. The development of the Middle to Late Triassic, N–S=trending, near-vertical shear zones formed weaknesses in the crust facilitating later fault localization, gravitational collapse, and subduction erosion along the continental margin. The length and linearity of this zone of lateral movement, coincident with a general hiatus of regional arc magmatism during the Middle to Late Triassic, is consistent with large-scale dextral transpression, or possible transform movement, during highly oblique NNE–SSW convergence along the pre-Andean (Gondwana) margin. The resultant margin parallel N–S-trending shear planes may be exploited by seismically active faults along the present coastal area of Chile. The palaeo-tectonic setting during the transitional period between earlier Gondwanide (Devonian to Permian) and later Andean (Late Jurassic to present) subduction may have had some similarity to the presently active San Andreas transform system of California.  相似文献   

3.
The Sierras Pampeanas in central and north-western Argentina constitute a distinct morphotectonic feature between 27°S and 33°S. The last stage of uplift and deformation in this area are interpreted to be closely related to the Andean flat-slab subduction of the Nazca plate beneath the South American plate. K–Ar fault gouge dating and low-temperature thermochronology along two transects within the Sierra de Comechingones reveal a minimum age for the onset of brittle deformation about 340 Ma, very low exhumation rates since Late Paleozoic time, as well as a total exhumation of about 2.3 km since the Late Cretaceous. New Ar–Ar ages (7.54–1.91 Ma) of volcanic rocks from the San Luis volcanic belt support the eastward propagation of the flat-slab magmatic front, confirming the onset of flat-slab related deformation in this region at 11.2 Ma. Although low-temperature thermochronology does not clearly constrain the signal of the Andean uplift, it is understood that the current structural relief related to the Comechingones range has been achieved after the exhumation of both fault walls (circa 80–70 Ma).  相似文献   

4.
The April 3, 1998 Mw = 5.1 Gualdo Tadino earthquake (central Italy) was the last significant event in the 6-month-long Umbria–Marche seismic crisis. This event and its aftershocks occurred in an area where active faulting produces no striking geological and geomorphological effects. In this study, we investigated the ruptured fault using detailed seismological data and a re-processed and re-interpreted seismic reflection profile. Aftershock location and focal mechanisms were used to constrain the geometry and kinematics of the ruptured fault and a comparison was made with the subsurface image provided by the seismic profile. We found that the 1998 Gualdo Tadino earthquake occurred on a WSW-dipping, normal fault, with a length of about 8 km and a relatively gentle dip (30°–40°), confined between 3.5 and 7 km in depth. Kinematics of the mainshock and aftershocks revealed a NE-trending extension, in agreement with the regional stress field active in the Northern Apennines belt. The Mw = 5.1 earthquake originated above the top of the basement and ruptured within the sedimentary cover, which consists of an evaporites–carbonates multilayer. We hypothesised that the active fault does not reach the surface (blind normal fault).  相似文献   

5.
Transpression occurs in response to oblique convergence across a deformation zone in intraplate regions and plate boundaries. The Korean Peninsula is located at an intraplate region of the eastern Eurasian Plate and has been deformed under the ENE–WSW maximum horizontal compression since the late Pliocene. In this study, we analyzed short-term instrumental seismic (focal mechanism) and long-term paleoseismic (Quaternary fault outcrop) data to decipher the neotectonic crustal deformation pattern in the southeastern Korean Peninsula. Available (paleo-)seismic data acquired from an NNE–SSW trending deformation zone between the Yangsan and Ulleung fault zones indicate spatial partitioning of crustal deformation by NNW–SSE to NNE–SSW striking reverse faults and NNE–SSW striking strike-slip faults, supporting a strike-slip partitioned transpression model. The instantaneous and finite neotectonic strains, estimated from the focal mechanism and Quaternary outcrop data, respectively, show discrepancies in their axes, which can be attributed to the switching between extensional and intermediate axes of finite strain during the accumulation of wrench-dominated transpression. Notably, some major faults, including the Yangsan and Ulsan fault zones, are relatively misoriented to slip under the current stress condition but, paradoxically, have more (paleo-)seismic records indicating their role in accommodating the neotectonic transpressional strain. We propose that fluids, heat flow, and lithospheric structure are potential factors affecting the reactivation of the relatively misoriented major faults. Our findings provide insights into the accommodation pattern of strain associated with the neotectonic crustal extrusion in an intraplate region of the eastern Eurasian Plate in response to the collision of the Indian Plate and the subduction of the Pacific/Philippine Sea Plates.  相似文献   

6.
Recent free-air gravity data covering the Makassar Straits is integrated with Bouguer gravity data from onshore East Kalimantan to provide new insights into the basement structure of the region. Onshore Kalimantan, gravity highs on the northern margin of the Kutai Basin trend NNE–SSW and N–S and correspond with the axes of inverted Eocene half-grabens. NW–SE trending lows correspond to deep seated basement weaknesses reactivated as normal faults during the Tertiary. An intra-basin gravity high trending NNE–SSW, the Kutai Lakes Gravity High, is modelled as folded high density Paleogene sediments flanked by syn-inversion synclines infilled with low density sediments. Offshore Kalimantan, the Makassar Straits include two basins offset by an en-echelon fault zone, suggestive of an extensional origin. The regional signature of the free-air anomaly data mirrors the bathymetry, but this effect can be reduced by the use of filters in order to examine the basin architecture. The free-air gravity minimum in the Makassar Strait is only −20 mGal, much smaller than that appropriate for a foreland basin, and more indicative of an extensional basin. The steepness of the gradients on the flanks of the basins indicates fault control of their margins. A regional 2D profile across the North Makassar Basin suggests the presence of attenuated crust (<14 km) in the basin axis at the present day, whereas flexural backstripping implies the presence of oceanic crust of middle Eocene age. The presence of oceanic crust in the North Makassar Straits Basin has implications for regional plate tectonic models.  相似文献   

7.
A double-planed structure of deep seismic zone has been found over a wide area more then 300 km × 200 km in the Tohoku District, the northeastern part of Honshu, Japan. This prominent feature of the configuration of the deep seismic zone has been ascertained through a precise determination of the microearthquake hypocenters by using the data from the seismic network of Tohoku University. The two planes are nearly parallel to each other, the distance between the two planes being from 30 to 40 km.Composite focal mechanism solutions are derived from the superposition of the distribution of first motions of P waves, and the different fault types are obtained for the two groups of earthquakes; the earthquakes which occurred in the upper plane are characterized by reverse faulting, some of them by down-dip compressional stresses, and those in the lower plane by down-dip extensional stresses. The evidence obtained here provides valuable information for the definition of the type of mechanism producing the plate motion beneath the island arc.  相似文献   

8.
Evidence of right‐lateral offsets associated with the 1912 earthquake (Mw 7.4) along the North Anatolian Fault (Gaziköy–Saros segment) allow us to survey (using DGPS) the co‐seismic and cumulative slip distribution. The damage distribution and surface breaks related with the earthquake show an elongated zone of maximum intensity (X MSK) parallel to the fault rupture on land but this may extend offshore to the north‐east and south‐west. Detailed mapping of the fault using topographic maps and aerial photographs indicates the existence of pull‐apart basins and pressure ridges. At several localities, the average 1912 offset along strike is 3.5–4 m and cumulative slip is 2–6 times that of individual movement. The fault rupture geometry and slip distribution suggest the existence of three subsegments with a combined total length of 110–120 km, a fault length and maximum slip similar to those of the 1999 Izmit earthquake. The amount of slip at the north‐easternmost section and in the coastal region of the Sea of Marmara reaches an average 4 m, thereby implying the offshore extension of the 1912 rupture. The results suggest that the 1912 event generated up to 150 km of surface faulting, which would imply a Mw 7.2–7.4 earthquake and which, added with rupture lengths of the 1999 earthquakes, help to constrain the remaining seismic gap in the Sea of Marmara.  相似文献   

9.
The focal mechanisms for 86 selected earthquakes (3.0 mb 5.5) located in central Alaska have been investigated from P-wave first motions; the data were gathered by local seismic networks. The results show a depth-dependent characteristic to the fault-plane solutions. For earthquakes having focal depths shallower than 60–70 km, the focal mechanisms indicate either strike-slip or normal faults, while for earthquakes with foci at intermediate depths the focal mechanisms correspond to thrust faults. The nature of the seismicity indicates the hinge line of the Pacific lithospheric plate under the study area to be striking N17°E from Cook Inlet towards interior Alaska. The comparison of the focal mechanisms with the seismicity shows that the strike-slip and normal faults are the predominant processes of stress release along the shallow section of the plate. The earthquakes with intermediate foci systematically occur along the inclined section of the plate. If the gently dipping nodal planes for these earthquakes are chosen as the fault planes, the focal mechanisms correspond to underthrust motions at the foci. In these, the slip vectors are oriented either to the west or north with the resultant being in the N30°W direction. The tension axes for the underthrust solutions are also found to be parallel to the local dip of the plate, indicating that the subducted plate in interior Alaska is undergoing gravitational sinking.  相似文献   

10.
In the southern South–North Seismic Zone, China, seismic activity in the Yingjiang area of western Yunnan increased from December 2010, and eventually a destructive earthquake of Ms5.9 occurred near Yingjiang town on 10 March 2011. The focal mechanism and hypocenter location of the mainshock suggest that the Dayingjiang Fault was the site of the mainshock rupture. However, most of foreshocks and all aftershocks recorded by a portable seismic array located close to the mainshock occurred along the N–S-striking Sudian Fault, indicating that this fault had an important influence on these shocks. Coulomb stress calculations show that three strong(magnitude ≥5.0) earthquakes that occurred in the study region in 2008 increased the coulomb stress along the plane parallel to the Dayingjiang Fault. This supports the Dayingjiang Fault, and not the Sudian Fault, as the seismogenic fault of the 2011 Ms5.9 Yingjiang earthquake. The strong earthquakes in 2008 also increased the Coulomb stress at depths of ≤5 km along the entire Sudian Fault, and by doing so increased the shallow seismic activity along the fault. This explains why the foreshocks and aftershocks of the 2011 Yingjiang earthquake were located mostly on the Sudian Fault where it cuts the shallow crust. The earthquakes at the intersection of the Sudian and Dayingjiang faults are distributed mainly along a belt that dips to the southeast at ~40°, suggesting that the Dayingjiang Fault in the mainshock area also dips to the southeast at ~40°.  相似文献   

11.
We used satellite imagery and field data to investigate the south‐westernmost Baikal rift zone. We focus our study in the Mondy and Ikhe Ukhgun valleys, site of an Mw = 6.9 seismic event in 1950. Surface deformations are observed along the E–W‐trending Mondy strike‐slip fault and along the Ikhe Ukhgun thrust. The Mondy fault system is 80 km long and is composed of four segments 10–15 km long. These segments are characterized by subvertical planes with left‐lateral movements. The Ikhe Ukhgun thrust is 20 km long, dips 40° to the south and shows reverse movement with a left‐lateral component. These observations are consistent with the present‐day regional NNE–SSW compression and with the focal mechanism of the 1950 Mondy earthquake that was recently re‐evaluated. These features, like those observed in the Tunka basin, demonstrate a recent change of regional strain regime from transtension to transpression that we place before the Late Pleistocene.  相似文献   

12.
青藏高原内部的近东西向伸展变形在藏南地区形成了一系列近南北向裂谷带,对其中最东端的错那-沃卡裂谷带南段错那-拿日雍错地堑调查结果表明,它是第四纪活动明显的半地堑式断陷盆地。控制该盆地发育的主边界断裂带是近南北走向、倾向东侧和长80～110km左右的盆地西缘正断层,是区域内N90°～92°E方向伸展变形的产物。断裂活动速率的多种估算结果表明,该断裂带百万年时间尺度的平均垂直活动速率介于0.2～0.9mm/a之间;MIS 8和MIS 6以来的断裂平均活动速率的合理估计值是0.6±0.2mm/a;但末次冰期盛冰阶以来的断裂平均活动速率明显增加,介于1.0～2.1mm/a之间,合理的估计值为1.3±0.3mm/a,末次冰盛期以来断裂垂直活动速率的增加极可能是该断裂带进入地震丛集期的反映。该地堑近于严格的南北走向及其与当雄-羊八井地堑相似的活动强度,指示了下地壳物质侧向流动所产生的纵向拉张作用最有利于该区近南北向裂谷带的形成。  相似文献   

13.
The distribution of relocated seismicity and the evolving shape of fracture zones through time in the oceanic crust of the Australian Plate adjacent to the Australia:Pacific plate boundary south of New Zealand are used to constrain the deformation of this region of the Australian Plate, here called the Puysegur Block. Relocated seismicity reveals a broad distribution of earthquakes in the Puysegur Block on both inter- and intraplate structures, including two great (M8+) earthquakes in the region over the past twenty years, one of which occurred over 130 km from the plate boundary. Plate reconstructions from the Late Oligocene through Early–Mid Miocene allow us to determine the undeformed shape of fracture zones in the Puysegur Block, formed during the Paleogene when the plate boundary was dominantly a divergent mid-ocean ridge system. Comparing these reconstructions to the present-day shape of the fracture zones allows us to map the deformation that has occurred within the Puysegur Block since the fracture zones formed. These two sets of independent observations delineate a broad zone of deformation extending ~ 150 km into the plate interior from the Macquarie Ridge Complex, the modern plate boundary structure through the region. The persistence of this deformation through time indicates a link with the evolution of the plate boundary over the past ~ 25 Ma from divergence to translation and subduction of the Australian Plate further north at the Puysegur Trench. We infer that this deformation may be a result of stresses in the Puysegur Block resulting from the impingement of the subducting plate on the thickened lithosphere of southern New Zealand. Such a collision may resist subduction, and if resistance remains substantial, further deformation internal to the Puysegur Block may lead to a southward migration of the Australia:Pacific subduction interface and the capturing of this section of lithosphere onto the Pacific Plate.  相似文献   

14.
The authors recently determined seismic parameters of earthquakes located along a lineation of microearthquakes in the Coast Range Province of northern California (Dehlinger and Bolt, 1984). The lineation closely follows the mapped Bartlett Springs fault zone, which is considered to be the source of seismic activity. This fault strikes N40°W for about 40 km and the mapped fault zone consists of a 2–3 km-wide belt of melange. Earthquake hypocenters indicate that this belt dips steeply to the northeast, with shocks occurring along multiple dislocation planes that together extend downward to depths of about 12 km.Focal mechanisms and associated stress fields were determined for 22 of the best recorded recent shocks along the earthquake lineation. Analyses of these shocks provided a comparison between individually and jointly determined focal mechanisms and of the directions of the corresponding stress axes, for identical shocks along the entire fault length. Thirteen of the shocks exhibited right-lateral, San Andreas type of source motions. Average values of these 13 individually determined focal parameters are within the standard deviation of the same set of jointly determined values. It is thus verified that the probability model algorithm for joint parameters determinations developed by Brillinger et al. (1980) yields reliable values of focal parameters. Moreover, the jointly determined parameters appear to be more reliable than the average-determined ones. The focal mechanisms and associated stress fields along the entire length of the Bartlett Springs fault zone are consistent with shearing motions between the North American and Pacific lithospheric plates that produce displacements along the San Andreas transform fault.  相似文献   

15.
Palaeostress results derived from brittle mesoscopic structures on Deception Island (Bransfield Trough, Western Antarctica) show a recent stress field characterized by an extensional regime, with local compressional stress states. The maximum horizontal stress (σy) shows NW–SE and NNE–SSW to NE–SW orientations and horizontal extension (σ3) in NE–SW and WNW–ESE to NW–SE directions. Alignments of mesofractures show a maximum of NNE–SSW orientation and several relative maxima striking N030-050E, N060-080E, N110-120E, and N160-170E. Subaerial and submarine macrofaults of Deception Island show six main systems controlling the morphology of the island: N–S, NNE–SSW, NE–SW, ENE–WSW to E–W, WNW–ESE, and NNW–SSE. Geochemical patterns related to submarine hydrothermally influenced fault and fissure pathways also share the same trends. The orientation of these fault systems is compared to Riedel shear fractures. Following this model, we propose two evolutionary stages from geometrical relationships between the location and orientation of joints and faults. These stages imply a counter-clockwise rotation of Deception Island, which may be linked to a regional left-lateral strike-slip. In addition, the simple shear zone could be a response to oblique convergence between the Antarctic and Pacific plates. This stress direction is consistent with the present-day movements between the Antarctic, Scotia, and Pacific plates. Nevertheless, present basalt-andesitic volcanism and deep earthquake focal mechanisms may indicate rollback of the former Phoenix subducted slab, which is presently amalgamated with the Pacific plate. We postulate that both mechanisms could occur simultaneously.  相似文献   

16.
Spectral analysis of the digital data of the Bouguer anomaly of North India including Ganga basin suggest a four layer model with approximate depths of 140, 38, 16 and 7 km. They apparently represent lithosphere–asthenosphere boundary (LAB), Moho, lower crust, and maximum depth to the basement in foredeeps, respectively. The Airy’s root model of Moho from the topographic data and modeling of Bouguer anomaly constrained from the available seismic information suggest changes in the lithospheric and crustal thicknesses from ∼126–134 and ∼32–35 km under the Central Ganga basin to ∼132 and ∼38 km towards the south and 163 and ∼40 km towards the north, respectively. It has clearly brought out the lithospheric flexure and related crustal bulge under the Ganga basin due to the Himalaya. Airy’s root model and modeling along a profile (SE–NW) across the Indus basin and the Western Fold Belt (WFB), (Sibi Syntaxis, Pakistan) also suggest similar crustal bulge related to lithospheric flexure due to the WFB with crustal thickness of 33 km in the central part and 38 and 56 km towards the SE and the NW, respectively. It has also shown the high density lower crust and Bela ophiolite along the Chamman fault. The two flexures interact along the Western Syntaxis and Hazara seismic zone where several large/great earthquakes including 2005 Kashmir earthquake was reported.The residual Bouguer anomaly maps of the Indus and the Ganga basins have delineated several basement ridges whose interaction with the Himalaya and the WFB, respectively have caused seismic activity including some large/great earthquakes. Some significant ridges across the Indus basin are (i) Delhi–Lahore–Sargodha, (ii) Jaisalmer–Sibi Syntaxis which is highly seismogenic. and (iii) Kachchh–Karachi arc–Kirthar thrust leading to Sibi Syntaxis. Most of the basement ridges of the Ganga basin are oriented NE–SW that are as follows (i) Jaisalmer–Ganganagar and Jodhpur–Chandigarh ridges across the Ganga basin intersect Himalaya in the Kangra reentrant where the great Kangra earthquake of 1905 was located. (ii) The Aravalli Delhi Mobile Belt (ADMB) and its margin faults extend to the Western Himalayan front via Delhi where it interacts with the Delhi–Lahore ridge and further north with the Himalayan front causing seismic activity. (iii) The Shahjahanpur and Faizabad ridges strike the Himalayan front in Central Nepal that do not show any enhanced seismicity which may be due to their being parts of the Bundelkhand craton as simple basement highs. (iv) The west and the east Patna faults are parts of transcontinental lineaments, such as Narmada–Son lineament. (v) The Munghyr–Saharsa ridge is fault controlled and interacts with the Himalayan front in the Eastern Nepal where Bihar–Nepal earthquakes of 1934 has been reported. Some of these faults/lineaments of the Indian continent find reflection in seismogenic lineaments of Himalaya like Everest, Arun, Kanchenjunga lineaments. A set of NW–SE oriented gravity highs along the Himalayan front and the Ganga and the Indus basins represents the folding of the basement due to compression as anticlines caused by collision of the Indian and the Asian plates. This study has also delineated several depressions like Saharanpur, Patna, and Purnia depressions.  相似文献   

17.
The 13 March 1992 Erzincan earthquake, M=6.8, occurred in the eastern half of the Erzincan basin. The largest aftershock took place near Pülümür on 15 March 1992. No clear surface breaks were observed, although teleseismic studies suggested that it was a strike-slip earthquake striking parallel to the North Anatolian fault, with a focus of approximately 10±2 km depth, 30 km rupture length, 95 cm of slip, and a 1.16×1026 dyn.cm seismic moment. The aftershock distribution concentrated at an area of the intersection between the North Anatolian fault and the Ovacik fault. These results indicate that the previously suggested seismic gap along the North Anatolian fault, east of Erzincan, still remains unruptured.  相似文献   

18.
A two-dimensional numerical modelling that simulate the kinematic and thermal response of the lithosphere to thinning was used for the quantitative reconstruction of the late Neogene to Recent times tectonic and stratigraphic evolution of the North Sicily continental margin (southern Tyrrhenian Sea). The numerical study of the evolution of the North Sicily margin builds on the crustal image and kinematic interpretation of the margin obtained by Pepe et al. [Tectonics 19 (2000) 241] on the basis of seismic data and gravity modelling. Tectonic modeling indicate that different segments of the margin were undergoing different vertical movements, which are mainly expression of the rifting and thinning of the lithosphere occurred during tectonic evolution of the southern Tyrrhenian Sea. A prediction of the pre-rift basement topography and the Moho along the margin converges to a value of 6.5 km for the depth of necking and a temperature-dependent EET (500° isotherm). The model fails to reproduce the morphology of the Solunto High confirming its non-extensional origin. A polyphase evolution is required to reproduce the observed syn- and post-rift stratigraphy. During the first rifting stage (between 9 and 5 Ma), crustal thinning factors reach maximum values of 1.27 in the Cefalù basin. A similar value is predicted for the subcrustal thinning around 60 km NNE of the profile margin. Crustal thinning factors increase during the second rifting stage (from 4 to 2 Ma) and reach values of 2 and up to 3.5 in the Cefalù basin and in the continent–oceanic transition zone, respectively. Similarly, subcrustal lithospheric thinning factors reach values up to 2.5 in the distal sector of the margin. An uplift of more than 100 m is predicted for the North Sicily shelf and surrounding onshore areas during the post-rift stage. The evolution of thermal structure with time is very sensitive to the partial thinning factors describing the evolution of the thinning itself during time. The lithosphere preserved part of its strength during extension. The effective elastic thickness (EET) along the margin through time is 24 km at the onset of rifting and reaches values less to 8 km during the second rifting stage in the northeastern end of the margin.  相似文献   

19.
王萱 《地质与资源》2014,23(2):114-120
闾山岩体地处华北板块北缘,天山-兴蒙造山带东段,总体呈北北东方向展布.早期可能受华北板块与佳蒙板块作用,为岩体的形成提供热源与空间;后期华北板块与太平洋板块的作用,使得岩浆最终就位.在板块相互作用的情况下,早期以挤压作用为主,造山作用使得地壳先加厚,后期转化为伸展作用,在地幔热源作用下进行拆沉作用,使得地壳减薄,形成闾山变质核杂岩和东西两侧的断陷盆地.  相似文献   

20.
运用丰富的二维地震资料,通过构造结构与地层结构的分析,对礼乐盆地的盆地结构演化与转型过程及其对南海地区复杂动力学背景的响应特征进行研究。结果表明:受控于NNE、NEE、NW和近EW向的断裂体系,礼乐盆地现今构造格局表现为"两坳一隆"的结构特征;两个关键的区域角度不整合T70和T50将礼乐盆地新生界自下而上划分为三层结构:陆缘裂陷层、漂移裂陷层和前陆-拗陷层;响应于太平洋板块俯冲、印度-欧亚板块碰撞、新南海扩张、古南海消亡和菲律宾海板块楔入等一系列周缘板块重组事件,礼乐盆地的盆地结构演化及转型经历了三个阶段:陆缘多幕裂陷阶段,盆地结构受控于NNE和NEE向断裂体系,南北坳陷连通;漂移裂陷阶段,NNE和NW向共轭断裂体系控制盆地格局,中部隆起形成,分隔南、北坳陷;前陆-拗陷阶段,前陆盆地结构形成,随后盆地因热沉降进入拗陷沉积阶段。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号