首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 30 毫秒
1.
Halite precipitation with water and air temperature was observed in detail,and homogenization temperature of fluid inclusions in halite formed in ancient and modem Chaka Salt Lake was studied.Halite precipitates mainly in August every year and largely precipitates between 13 and 15pm at one day when water temperatures reach 20℃but can seldom reach 30℃.Homogenization temperatures of fluid inclusions in halite formed in Chaka Salt Lake range from 14℃to 38℃with an average of 23.7℃.The number of inclusions appears an obvious peak value at homogenization temperatures between 18～25℃,which probably represent the water temperature in which halite mainly precipitates when water temperatures reach 20℃.Therefore,homogenization temperatures of fluid inclusions in halite formed in Chaka Salt Lake can well reflect the water temperature.  相似文献   

2.
柴达木盆地昆特依盐湖含杂卤石地层高分辨率矿物学研究   总被引：1，自引：0，他引：1  
柴达木盆地昆特依盐湖杂卤石资源丰富,是开展现代内陆盐湖杂卤石成因机制研究的良好载体.精细刻画沉积特征对阐释沉积矿床成因具有重要作用.本研究以昆特依盐湖大盐滩矿区ZK3608钻孔岩芯14.08-25.48 m段碎屑-杂卤石沉积韵律为研究对象,开展高分辨率矿物学研究,结合石盐流体包裹体化学组成和石盐中微量元素分析,尝试从高分辨率沉积学和矿物学的角度探讨杂卤石的成因.研究结果显示,石盐层产出的杂卤石含量低但分布范围广,为原生矿物;碎屑层中的杂卤石主要为次生矿物.石盐层与碎屑层之间存在一个过渡层位,该层位的杂卤石高度富集且矿物组成复杂,推测是由于原生与准同生杂卤石短时间内先后形成导致的.结合石盐流体包裹体化学组成所代表的古卤水变化特征分析表明,Ca-Cl型深部油田卤水的补给对研究区不同时期杂卤石的形成有重要影响.地球化学特征综合分析指示,石盐层的原生杂卤石由富钾镁的浓缩卤水与Ca-Cl型深部油田卤水混合直接生成;而过渡层位的杂卤石受到气候变化与Ca-Cl型深部油田卤水补给的共同作用.  相似文献   

3.
本文是在建立了盐酸胍法制备样品用于氧同位素分析方法研究的基础上,测定了察尔汗湖区各类天然水及ZK88-01占孔岩心的原生石盐流质包裹体氢氧稳定同位素组成。该方法适用于高盐度卤水微量δ18O分析,具有成本低、操作简便和定量转化的优点,值得在国内推广。 根据原生石盐包体水δD、δ18O的分布特征,论述了察尔汗盐湖距今5万年来湖水的演化历程。划分出三种不同成盐环境下的演化期,各期中古湖水体具有波动的继承性,各期间可能存在成盐环境的突变.根据天然水δD、δ18O关系初步获得该区蒸发线为:δD=2.5δ18O-45.3;证实了剖面上部淤泥水与达布逊湖水下渗有关;下部明显地有侧向水补给.  相似文献   

4.
Analyses of primary and early diagenetic fluid inclusions in the halite from the Late Ordovician Mallowa Salt, Canning Basin, Western Australia indicate a Ca‐rich composition and high concentration of parent brines in the basin which were close to sylvite and carnallite precipitation. The salt‐bearing series in the sampled interval was overheated up to 62 °C. The recorded differences in gas compositions result from the input of several gas sources including dispersed organic matter in the salt series and hydrocarbon deposits in the underlying rocks. The high concentration of the brines in fluid inclusions does not allow quantitative reconstruction of the chemical composition of Late Ordovician parent seawater. Using the information from Early Cambrian and Late Silurian basins as a proxy, however, the new data indicate that Late Ordovician seawater was undoubtedly Ca‐rich and, in comparison with modern seawater, had a similar K content, considerably lower Mg content (c. 30%), approximately three times the Ca content and one‐third the SO4 content.  相似文献   

5.
Sulphate concentrations have been determined in fluid inclusions by Raman spectroscopy using the M.O.L.E. microprobe after verifying that the sulphate determination is proportional to the total sulphate in the aqueous phase. Comparison of miSO4. values in primary fluid inclusions with associated mother brine from actual solar salt works demonstrates their chemical equivalence.Keuper halite of marine origin has also been studied. The inclusions contain solid phases: anhydrite and possibly gypsum and glauberite as well. The moiality of the total dissolved sulphate in the aqueous phase is lower than that obtained during present sea-water evaporation at the halite stage of precipitation. Some geochemical hypotheses are proposed to account for this anomaly.  相似文献   

6.
Paleo-temperature and paleo-environment can be interpreted from measuring homogenization temperatures of fluid inclusions within halite. In order to conduct such measurements, vapor bubbles within low-temperature fluid inclusion often need to be created through cooling process by using cooling stage or freezer. Proper cooling is critical for interpreting measured temperature data. We tested two common cooling methods, using heating/freezing stage and freezer, for studying fluid inclusions in halite precipitated in laboratory at conrtolled temperature of 25℃. While using the heating/freezing stage, halite samples were kept at-18℃ for 40–50 min; whereas for freezer, samples were stored at-18℃ for 1, 10, 20 and 40 days, respectively. By comparing the homogenization temperatures of the two cooling processes, we explored the detailed experimental processes and developed an optimal cooling nucleation procedure for homogenization temperature analyses of fluid inclusions within surface-temperature halite. The results show that the maximum homogenization temperatures from both methods approximate the actual brine temperature of 25℃. However, extended refrigeration time has noticeable influence on the results. The refrigeration time of the experiment can be shortened to meet requirements.  相似文献   

7.
石盐的流体包裹体成分可提供古流体组成的物理化学信息,用以探查卤水组成变化及环境演化规律等。四川盆地位于上扬子地台,其中的早-中三叠纪沉积建造是中国海相找钾的有利层位之一。获取石盐沉积时期的卤水成分信息,是深刻认识四川盆地古海水蒸发浓缩程度的重要途径。文章利用激光剥蚀电感耦合等离子体质谱法,对采自川东地区长平3井嘉陵江组的石盐流体包裹体开展了化学组成分析,结果显示古卤水化学类型为Mg_SO4型;流体包裹体中的ρ(K~+)与现代海水浓缩到钾石盐析出阶段的ρ(K~+)基本一致,可能揭示了盆地三叠纪时期古卤水已达到钾石盐析出阶段,对四川盆地沉积环境演化及钾盐成矿规律研究等具有重要的理论意义。  相似文献   

8.
The age framework of Qarhan Salt Lake in arid western China is still controversial due in part to (1) age discrepancy between conventional 14C and 230Th dating results, and (2) no AMS 14C ages of organic carbon from drilling cores in Qarhan Salt Lake were reported until now. In order to discuss these chronological problems, upper 54.50 m lacustrine sediments from a drilling core (ISL1A) recovered from Qarhan Salt Lake were dated based on 230Th and AMS 14C dating techniques. Results show that (1) AMS 14C ages of total organic carbon (TOC) from 4.65 to 30.29 m are almost in stratigraphic order and consistent with 230Th ages of halite in the corresponding layers; (2) AMS 14C ages of TOC from 30.29 to 54.50 m are younger with increasing depth. This phenomenon was also found in Shell Bar in the study area, suggesting that AMS 14C ages from upper 30.29 m are more reliable while those from lower 24.21 m in ISL1A may be underestimated; (3) 230Th ages of halite from lower 24 m lacustrine sediments are obviously older than AMS 14C ages of TOC in the corresponding layers, which results into different age framework of salt lake sediments in Qarhan Salt Lake; (4) if extrapolating these reliable AMS 14C ages in ISL1A, similar age framework with 230Th ages in this core confirms that 230Th ages are much close to the true ages of these sediments, which suggests that the forming timing of the bottom salt layer is ~50 ka.  相似文献   

9.
Mo-Bi mineralization occurs in subvertical and subhorizontal quartz-muscovite-± K-feldspar veins surrounded by early albitic and later K-feldspathic alteration halos in monzogranite of the Archean Preissac pluton, Abitibi region, Québec, Canada. Molybdenite is intergrown with muscovite in the veins or associated with K-feldspar in the alteration halos. Mineralized veins contain five main types of fluid inclusions: aqueous liquid and liquid-vapor inclusions, aqueous carbonic liquid-liquid-vapor inclusions, carbonic liquid and vapor inclusions, halite-bearing aqueous liquid and liquid-vapor inclusions, trapped mineral-bearing aqueous liquid and liquid-vapor inclusions. The carbonic solid in frozen carbonic and aqueous-carbonic inclusions melts in most cases at −56.7 ± 0.1 °C indicating that the carbonic fluid consists largely of CO2. All aqueous inclusion types and the aqueous phase in carbonic inclusions have low initial melting temperatures (≥70 °C), requiring the presence of salts other than NaCl. Leachate analyses show that the bulk fluid contains variable proportions of Na, K, Ca, Cl, and traces of Mg and Li. The following solids were identified in the fluid inclusions by SEM-EDS analysis: halite, calcite, muscovite, millerite (NiS), barite and antarcticite (CaCl2 · 6H2O). All are interpreted to be trapped phases except halite which is a daughter mineral, and antarcticite which formed during sample preparation (freezing). Aqueous inclusions homogenize to liquid at temperatures between 75 °C and 400 °C; the mode is 375 °C. Aqueous-carbonic inclusions homogenize to liquid or vapor between 210 °C and 400 °C. Halite-bearing aqueous inclusions homogenize by halite dissolution at approximately 170 °C. Aqueous inclusions containing trapped solids exhibit liquid-vapor homogenization at temperatures similar to those of halite-bearing aqueous inclusions. Temperatures of vein formation, based on oxygen isotopic fractionation between quartz and muscovite, range from 342 °C to 584 °C. The corresponding oxygen isotope composition of the aqueous fluid in equilibrium with these minerals ranges from 1.2 to 5.5 per mil with a mean of 3.9 per mil, suggesting that the liquid had a significant meteoric component. Isochores for aqueous fluid inclusions intersect the modal isotopic isotherm of 425 °C at pressures between 590 and 1900 bar. A model is proposed in which molybdenite was deposited owing to decreasing temperature and/or pressure from CO2-bearing, moderate to high salinity fluids of mixed magmatic-meteoric origin that were in equilibrium with K-feldspar and muscovite. These fluids resulted from the degassing of a monzogranitic magma and evolved through interaction with volcanic (komatiitic) and sedimentary country rocks. Received: 6 February 1997 / Accepted: 28 January 1998  相似文献   

10.
Intrusion-hosted, low sulfide, sheeted vein systems are common within many plutons and stocks of the middle Cretaceous Tombstone-Tungsten magmatic belt, Yukon Territory, and host significant gold mineralization. Fluid inclusion characteristics of five such systems, namely Emerald Lake, Dublin Gulch, Scheelite Dome, Mike Lake, and MacTung, constrain the vein-forming fluid composition, formation temperatures and pressures, hydrothermal fluid processes, and potential fluid sources. The veins contain a wide range of fluid inclusion types. Ubiquitous type 1A and 1B inclusions are low salinity (1A: XNaCl<0.02; 1B: XNaCl<0.03), CO2-rich (1A: XCO2=0.18-1.00; 1B: XCO2=0.02-0.33). Laser Raman studies indicate that type 1A and 1B inclusions commonly contain minor CH4 (XCH4<0.09) and N2 (XN2<0.12). Type 2 inclusions are H2O-rich (XH2O=0.94-0.99), of low to moderate salinity (XNaCl=0.01-0.06), and were common at Emerald Lake and Dublin Gulch, in addition to localized type 3A halite-bearing inclusions (XNaCl=0.12-0.16). Both inclusion types post-dated the CO2-rich inclusions. Sheeted veins in the Mike Lake pluton contained coexisting type 1A and 3A and 3B (halite + sylvite) inclusions. Type 1A inclusions in all studied systems homogenized between 208 and 362 °C, type 1B ranged between 205 and 329 °C, and type 2 between 154 and 261 °C. Type 3A and 3B inclusions homogenized between 217 and 355 °C. A predominantly magmatic source for both CO2-rich and saline H2O-rich fluids is favored, with variations in trapping pressure (<1 kbar at Mike Lake, >1 kbar at Emerald Lake and Dublin Gulch, and >2 kbar at MacTung and Scheelite Dome) that potentially control fluid composition and evolution. A variety of fluid processes may have been responsible for gold precipitation including immiscibility and/or release of an evolving magmatic fluid.  相似文献   

11.
The quartz grains from the sandstone of Jaisalmer, Pariwar and Goru Formations of the Jaisalmer basin, Rajasthan, India, exhibits a variety of primary and secondary fluid inclusions. Most of them are hydrocarbon bearing fluid inclusions. Laser Raman studies indicate that the primary fluid inclusions were mostly having aliphatic hydrocarbons with lower degree of maturity, while the secondary fluid inclusions were generally with aliphatic as well as aromatic hydrocarbons with higher degree of maturity. This inference was consistent with their fluorescence characteristics. The homogenization temperatures of primary monophase CH4 rich fluid inclusions varied from ?80°C to ?100°C, whereas the primary biphase fluid inclusions (CH4-CO2) homogenized between +80°C and +150°C. The secondary petroleum rich monophase fluid inclusions were having homogenization temperature between ?80°C to ?90°C, whereas the secondary biphase fluid inclusions homogenized between +130°C and +180°C. Most of the secondary biphase fluid inclusions were having the mixtures of H2O-CO2-NaCl, and were identified on the basis clathrate formation and they got homogenized between +140°C and + 250 °C. The three past events of migration of petroleum inferred in the host rock which were marked by the presence of characteristic secondary fluid inclusions. They were identified on the basis of cross-cutting relationships of different trails of fluid inclusions in the quartz. The cement generation in the basin might have been occurred in two stages as per the fluid inclusion petrography.  相似文献   

12.
The salt assemblages precipitated during evaporation of concentrated brine collected from Gasikule Salt Lake (GSL) were studied to better understand the formation of potassium deposits in the Qaidam Basin. The study included isothermal evaporation at 25 °C in the laboratory and solar evaporation in the ponds at GSL field. Brines increased in density and became moderately acidic (pH?≈?5.30) while major ion geochemistry and precipitate mineralogy all showed broad agreement between both systems. Four salt assemblages were identified in the isothermal evaporation experiment: halite?→?halite?+?hexahydrite?→?halite?+?bischofite?+?carnallite?→?bischofite. Alternately, three salt assemblages were recognized in the solar evaporation: halite?→?halite?+?epsomite?+?carnallite?→?halite?+?carnallite?+?bischofite. The key difference in salt assemblages between the two systems is attributed to differences in relative humidity and temperature conditions. Although the GSL has deep spring inflow recharge, the high abundance of MgSO4 salts demonstrates that the salt assemblages are similar to normal seawater evaporation. Thus, different proportions of deep spring inflow and river water could form both MgSO4-deficient potassium evaporite and normal seawater potassium evaporites. Therefore, nonmarine water may form diverse potassium evaporite deposits in continental basins when the geological structure as well as hydrogeological and climatic conditions is appropriate.  相似文献   

13.
The Hujiayu Cu deposit,representative of the "HuBi-type" Cu deposits in the Zhongtiao Mountains district in the southern edge of the North China Craton,is primarily hosted in graphitebearing schists and carbonate rocks.The ore minerals comprise mainly chalcopyrite,with minor sphalerite,siegenite[(Co,Ni)_3S_4],and clausthalite[Pb(S,Se)].The gangue minerals are mainly quartz and dolomite,with minor albite.Four fluid inclusion types were recognized in the chalcopyrite-pyrite-dolomite-quartz veins,including CO_2-rich inclusions(type Ⅰ),low-salinity,liquid-dominated,biphase aqueous inclusions(type Ⅱ),solid-bearing aqueous inclusions(type Ⅲ),and solid-bearing aqueous-carbonic inclusions(type Ⅳ).Type I inclusion can be further divided into two sub-types,i.e.,monophase CO_2 inclusions(type Ⅰa) and biphase CO_2-rich inclusions(with a visible aqueous phase),and type Ⅲ inclusion is divided into a subtype with a halite daughter mineral(type Ⅲa) and a subtype with multiple solids(type Ⅲb).Various fluid inclusion assemblages(FIAs) were identified through petrographic observations,and were classified into four groups.The group-1 FIA,consisting of monophase CO_2 inclusions(type Ⅰa),homogenized into the liquid phase in a large range of temperatures from-1 to 28℃,suggesting post-entrapment modification.The group-2 FIA consists of type Ⅰb,Ⅲb and Ⅳ inclusions,and is interpreted to reflect fluid immiscibility.The group-3 FIA comprises type Ⅱ and Ⅲa inclusions,and the group-4FIA consists of type Ⅱ inclusions with consistent phase ratios.The group-1 and group-2 FIAs are interpreted to be entrapped during mineralization,whereas group-3 and group-4 FIAs probably represent the post-mineralization fluids.The solid CO_2 melting temperatures range from-60.6 to56.6℃ and from-66.0 to-63.4℃ for type Ⅰa and type Ⅳ inclusions,respectively.The homogenization temperatures for type Ⅱ inclusions range from 132 to 170℃ for group-3 FIAs and115 to 219℃ for group-4 FIAs.The halite melting temperatures range from 530 to 562℃ for typeⅢ b and Ⅳ inclusions,whereas those for type Ⅲa inclusions range from 198 to 398℃.Laser Raman and SEM-EDS results show that the gas species in fluid inclusions are mainly CO_2 with minor CH_4,and the solids are dominated by calcite and halite.The calcite in the hosting marble and dolomite in the hydrothermal veins have δ~(13)C_(V-pdb) values of-0.2 to 1.2‰ and-1.2 to-6.3‰,and δ~(18)O_(v-smow) values of 14.0 to 20.8 ‰ and 13.2 to 14.3‰,respectively.The fluid inclusion and carbon-oxygen isotope data suggest that the ore-forming fluids were probably derived from metamorphic fluids,which had reacted with organic matter in sedimentary rocks or graphite and undergone phase separation at 1.4-1.8 kbar and 230-240℃,after peak metamorphism.It is proposed that the Hujiayu Cu deposit consists of two mineralization stages.The early stage mineralization,characterized by disseminated and veinlet copper sulfides,probably took place in an environment similar to sediment-hosted stratiform copper mineralization.Ore minerals formed in this precursor mineralization stage were remobilized and enriched in the late metamorphic hydrothermal stage,leading to the formation of thick quartz-dolomite-sulfides veins.  相似文献   

14.
Fluid inclusions that bear halite daughter minerals were discovered in volcanic rocks at Pingnan area in the Dongying sag. The samples of the fluid inclusions collected from the BGX-15 well drill cores are hosted in quartz of diorite-porphyrite. The daughter minerals are identified as NaCl crystals after being observed under a microscope and analyzed by in situ Raman spectroscopy at −185°C. The results of micro-thermal analysis show that the homogenization temperatures of primary fluid inclusions are between 359 and 496°C, and the salinities of fluid inclusions are from 43.26 to 54.51 wt-%. All fluid inclusions in the studied samples can be divided into five types including primary fluid inclusions and secondary fluid inclusions. The fact that five types of fluid inclusions were symbiotic in the same quartz grain implies that immiscibility happened in magma. Due to the decrease in temperature and pressure during the ascent of magma, the fluids became intensively immiscible. This process accelerates the degassing of CO2 from magma, but the remnant fluids with high salinity are preserved in fluid inclusions. Thus, the primary fluid inclusions are mainly in NaCl-H2O fluids and poor in CO2. The results of our study indicate that the degassing of magma and accumulation of CO2 gas at the Pingnan area are relative to the immiscibility of high salinity fluids. This discovery is important because it can help us have a further understanding of the mechanism of magma degassing and accumulation of the inorganic CO2 in eastern China. Translated from Acta Geologica Sinica, 2006, 80(11): 1699–1705 [译自: 地质学报]  相似文献   

15.
The data on the mineral composition and crystallization conditions of magnesian skarn and magnetite ore at contacts of dolerite with rock salt and dolomite in ore-bearing volcanic—tectonic structures of the Angara—Ilim type have been integrated and systematized. Optical microscopy, scanning and transmission electron microscopy, electron microprobe analysis, electron paramagnetic resonance, Raman and IR spectroscopy, and methods of mineralogical thermometry were used for studying minerals and inclusions contained therein. The most diverse products of metasomatic reactions are found in the vicinity of a shallow-seated magma chamber that was formed in Lower Cambrian carbonate and saliferous rocks under a screen of terrigenous sequences. Conformable lodes of spinel-forsterite skarn and calciphyre impregnated with magnesian magnetite replaced dolomite near the central magma conduit and apical portions of igneous bodies. At the postmagmatic stage, the following mineral assemblages were formed at contacts of dolerite with dolomite: (1) spinel + fassaite + forsterite + magnetite (T = 820?740°C), (2) phlogopite + titanite + pargasite + magnetite (T = 600–500°C), And (3) clinochlore + serpentine + pyrrhotite (T = 450°C and lower). Rock salt is transformed at the contact into halitite as an analogue of calciphyre. The specific features of sedimentary, contact-metasomatic, and hydrothermal generations of halite have been established. The primary sedimentary halite contains solid inclusions of sylvite, carnallite, anhydrite, polyhalite, quartz, astrakhanite, and antarcticite; nitrogen, methane, and complex hydrocarbons have been detected in gas inclusions; and the liquid inclusions are largely aqueous, with local hydrocarbon films. The contact-metasomatic halite is distinguished by a fine-grained structure and the occurrence of anhydrous salt phases (CaCl2 · KCl, CaCl2, nMgCl2 · mCaCl2) and high-density gases (CO2, H2S, N2, CH4, etc.) as inclusions. The low-temperature hydrothermal halite, which occurs in skarnified and unaltered silicate rocks and in ore, is characterized by a low salinity of aqueous inclusions and the absence of solid inclusions. The composition and aggregative state of inclusions in halite and forsterite indicate that salt melt-solution as a product of melting and dissolution of salt was the main agent of high-temperature metasomatism. Its total salinity was not lower than 60%. The composition and microstructure of magnetite systematically change in different mineral assemblages. Magnetite is formed as a result of extraction of iron together with silicon and phosphorus from dolerite. The first generation of magnetite is represented by mixed crystals, products of exsolution in the Fe-Mg-Al-Ti-Mn-O system. The Ti content is higher at the contact of dolerite with rock salt, whereas, at the contact with dolomite, magnetite is enriched in Mg. The second generation of magnetite does not contain structural admixtures. The distribution of boron minerals and complex crystal hydrates shows that connate water of sedimentary rocks could have participated in hydrothermal metasomatic processes.  相似文献   

16.
Late Neoproterozoic to Early Cambrian carbonates of the Ara Group form important intra‐salt ‘stringer’ reservoirs in the South Oman Salt Basin. Differential loading of thick continental clastics above the six carbonate to evaporite cycles of the Ara Group led to the formation of salt diapirs, encasing a predominantly self‐charging hydrocarbon system within partly highly overpressured carbonate bodies (‘stringers’). These carbonates underwent a complex diagenetic evolution, with one stage of halite cementation in a shallow (early) and another in a deep (late) burial environment. Early and late halite cements are defined by their microstructural relationship with solid bitumen. The early phase of halite cementation is post‐dated by solid reservoir bitumen. This phase is most pervasive towards the top of carbonate stringers, where it plugs nearly all available porosity in facies with initially favourable poroperm characteristics. Bromine geochemistry revealed significantly higher bromine contents (up to 280 p.p.m.) in the early halite compared with the late halite (173 p.p.m.). The distribution patterns and the (high) bromine contents of early halite are consistent with precipitation caused by seepage reflux of highly saturated brines during deposition of the overlying rock salt interval. Later in burial history, relatively small quantities of early halite were dissolved locally and re‐precipitated as indicated by inclusions of streaky solid bitumen within the late halite cements. Late halite cement also seals fractures which show evidence for repeated reopening. Initially, these fractures formed during a period of hydrothermal activity and were later reopened by a crack‐seal mechanism caused by high fluid overpressures. Porosity plugging by early halite cements affects the poroperm characteristics of the Ara carbonates much more than the volumetrically less important late halite cement. The formation mechanisms and distribution patterns of halite cementation processes in the South Oman Salt Basin can be generalized to other petroliferous evaporite basins.  相似文献   

17.
Sichuan Basin is one of the most important marine–salt forming basins in China. The Simian and Triassic have a large number of evaporites. The Triassic strata have found a large amount of polyhalite and potassium-rich brine. However, no soluble potassium salt deposit were found. In this study, the halite in well Changping 3 which is located at the eastern part of the Sichuan basin was studied using the characteristics, hydrogen and oxygen isotopes of the fluid inclusion in halite to reconstruct the paleoenvironment. The salt rocks in well Changping 3 can be divided into two types: grey salt rock and orange salt rock. The result shows that the isotopic composition of the halite fluid inclusion is distinct from the global precipitation line reflecting that the salt formation process is under strong evaporation conditions and the climate is extremely dry. At the same time, compared with the hydrogen and oxygen isotopes of brine in the Sichuan Basin and the hydrous isotope composition of the inclusions in the salt inclusions of other areas in China, it is shown that the evaporation depth of the ancient seawater in the Sichuan Basin was high and reached the precipitation of potassium and magnesium stage.  相似文献   

18.
Raman spectroscopic studies of daughter crystals of hambergite [Be2BO3(OH, F)] in primary melt and secondary fluid inclusions in morganite crystals from the Muiane pegmatite, Mozambique, show that the inclusions have extremely high beryllium concentrations, corresponding to as much as 10.6% (g/g) in melt inclusions and 1.25% (g/g) BeO in fluid inclusions. These melt and fluid inclusions were trapped at about 610°C and 277°C, respectively. We propose two possible mechanisms for the formation of the hambergite crystals: (i) direct crystallization from a boron- and beryllium-rich pegmatite-forming melt or (ii) these are daughter crystals produced by the retrograde reaction of the boron-rich inclusion fluid with the beryl host, after release of boric acid from the primary trapped metastable volatile-rich silicate melt during cooling and recrystallization. Although we favor the second option, either case demonstrate the extent to which Be maybe concentrated in a boron-rich fluid at relatively high temperatures, and in which species of Be maybe transported. One important constraint on the stability of the hambergite paragenesis is temperature; at temperatures of ≥650°C (at 2 kbar) hambergite is not stable and converts to bromellite [BeO].  相似文献   

19.
柴达木盆地西部尕斯库勒盐湖280 ka以来沉积特征   总被引：2，自引：0，他引：2  
以柴达木盆地西部尕斯库勒盐湖干盐滩6个钻孔岩芯为研究对象,从岩性特征、成盐期、沉积类型、沉积结构、沉积幅度等方面探讨尕斯库勒盐湖沉积特征。研究表明,自280 ka以来尕斯库勒盐湖经历相对湿润-干旱的气候波动和气候演化,在距今43.6 ka左右进入最干旱时期,可能属于柴达木盆地第二次成盐期;沉积结构层分异现象不明显;各成盐期平均沉积速率变化不大,平均沉积速率比新疆和内蒙古地区高; 该湖沉积中心在盐湖的西北部。  相似文献   

20.
青藏高原末次冰期盛冰阶的时限与干盐湖地质事件   总被引：15，自引：1，他引：15       下载免费PDF全文
本文根据高原盐湖原生石盐矿物包裹体流质的氢、氧稳定同位素分析以及包裹体流质的Ｎａ＋、Ｍｇ2＋测定讨论了青藏高原北部近五万年来的气候环境演变，论述了末次冰期盛冰阶在高原地区的时限问题，初步确定盛冰阶的时限为２１０００－１５０００ａＢ．Ｐ．，该期的平均温度比现今低约６－７℃。由于高寒的气候环境，促使高原盐湖补给水锐减，在其盛冰阶的晚期普遍形成干盐湖地质事件，这从各不同时间形成的原生石盐包裹体的流质中ｖｇ2＋／Ｎａ＋值的分布得到充分的证实。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号