共查询到20条相似文献，搜索用时 93 毫秒
1.
剪切带倾角尺度律与局部化启动跳跃稳定研究 总被引：9，自引：5，他引：9
研究了剪切带倾角是如何依赖于岩样高度以及剪切带的不稳定性。建立了准脆性材料试件剪切带倾角尺度效应模型,得到了剪切带倾角尺度效应的解析解,且与实验结果比较相符。研究结果表明:剪切带倾角随着试件高度的增加而增加,但其增加幅逐渐减缓,最终趋于稳定值。笔者还对剪应变局部化启动、跳跃和稳定进行了理论分析,解释了实验所观测到的剪切带跳跃现象和砂岩岩样应变局部化较煤样滞后的原因。剪应变局部化是否发生跳跃,关键取决于全程应力-应变曲线软化段是否存在拐点。对于没有拐点的情形,宏观剪切带图案不跳跃。局部化是导致准脆性材料试件剪切带倾角尺度效应的原因。 相似文献
2.
砂土的渐进破坏及其数值模拟 总被引：1，自引：1，他引：0
紧密砂土在排水剪切过程中由于材料的应变软化特性,会出现变形局部化并伴随剪切带的产生。对此类问题进行数值模拟时会遇到很多困难,比如如何模拟紧砂的应变软化特性,如何处理有限元数值分析过程中刚度矩阵的非正定导致计算结果发散问题,以及如何处理应力不连续的问题,拟针对以上问题进行了探讨。 相似文献
3.
Implementation and applications for a constitutive numerical model on F‐75 silica sand, course silica sand and two sizes of glass beads compressed under plane strain conditions are presented in this work. The numerical model is used to predict the stress versus axial strain and volumetric strain versus axial strain relationships of those materials; moreover, comparisons between measured and predicted shear band thickness and inclination angles are discussed and the numerical results compare well with the experimental measurements. The numerical model is found to respond to the changes in confining pressure and the initial relative density of a given granular material. The mean particle size is used as an internal length scale. Increasing the confining pressure and the initial density is found to decrease the shear band thickness and increase the inclination angle. The micropolar or Cosserat theory is found to be effective in capturing strain localization in granular materials. The finite element formulations and the solution method for the boundary value problem in the updated Lagrangian frame (UP) are discussed in the companion paper. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
4.
不同于常规土体单元试验中恒定围压的应力路径,进行了减围压（卸载）应力路径下丰浦砂的平面应变压缩试验,研究了初始围压和初始相对密度对砂土的剪切强度和剪切带特性的影响。结合二维数字图像（DIC）相关方法,分析剪切带的形成过程,对剪切带的厚度和倾角及其影响因素进行定量地分析。研究结果表明,剪切带形成于峰值剪切强度之前;对于密实丰浦砂试样,随着围压的增加,其剪切强度(最大有效主应力比)减小且峰值强度出现越晚,剪切带厚度减小而剪切带倾角变化不大;丰浦砂试样的相对密度越高,剪切强度越大且峰值强度出现越早,剪切带厚度越小而剪切带倾角越高。此外,基于峰值内摩擦角的Coulomb公式可以较好地预测平面应变试验条件下丰浦砂的最大剪切带倾角。 相似文献
5.
基于亚像素角点检测的数字图像测量系统能够记录三轴试样表面方块角点的位移,从而获得试样表面每一时刻的局部应变及应变场。分析了试样不同位置的局部径向应变在剪切过程中的变化,获得了以不同初始成样含水率制备的松砂和密砂试样在不同特征时刻的应力与应变的特征值。通过轴向应变场的变化分析了从应变局部化出现到剪切带发育、形成的这一完整的渐进破坏过程,总结了剪切带形成时的局部最大轴向应变特征值,并定性地分析了剪切带内、外土体在渐进破坏过程中不同的轴向应变增长率。试验结果表明：在应变场中试样应变局部化明显,并可以依此确定应变局部化的出现、剪切带的形成;对于密砂及初始含水率为0%制备的松砂试样,应力在应变局部化出现之初即达到峰值,剪切带形成时应力已经开始下降,进入应变软化阶段;以初始含水率为6%和12%制备的松砂试样在达到应力峰值时剪切带已经形成;剪切带内土体的局部轴向应变增长幅度比剪切带外的土体大得多。试样整体轴向应变的增大主要是由剪切带内土体剪切破坏产生的较大轴向应变所致。 相似文献
6.
单轴压缩下岩石应变局部化的应变梯度塑性解 总被引：3，自引：2，他引：1
通过在屈服函数中引入材料内部长度建立应变梯度塑性增量本构关系,对岩石材料在单轴压缩条件下应变局部化的二维情况进行了研究。首先,建立了在Mises屈服准则下平面应变情况的岩石材料应变局部化带的带宽与其倾角的关系式,讨论了其带宽的分布范围和最大值与最小值形成的条件,给出岩石材料破坏Ⅰ, Ⅱ类变形的条件,并推出破坏的临界角度;其次,对岩石材料Ⅰ类变形进行了详细地分析,讨论了在不同泊松比 和 条件下材料应变局部化带的倾角的变化范围;最后,利用所得的结论同材料破坏的库仑准则进行对比研究,对内摩擦系数给予了合理的解释。 相似文献
7.
岩石结构稳定性问题是岩土工程实践中迫切需要解决的重要课题之一。文章以地震为例，讨论了地质灾害的局部化特征，介绍了经典弹、塑性理论的某些缺陷及梯度塑性理论的几点优越性：(1)控制方程总是适定的；(2)病态网格依赖性消失；(3)局部化带宽度由材料的内部长度完全确定；(4)可对岩石结构的尺寸效应及失稳回跳进行合理解释和预测；(5)对预测宏观及微观问题均比较有效。介绍了基于梯度塑性理论的岩石变形、破坏及稳定性研究进展。梯度塑性理论可用于研究单轴压缩条件下，岩石试件发生剪切破坏时全程应力一应变曲线、尺寸效应、剪切带倾角尺寸效应及失稳回跳等问题。它们对土木工程及岩土工程均十分重要。若将单轴压缩岩样比拟为矿柱，则该失稳判据即为矿柱岩爆准则。梯度塑性理论可用于研究韧性断层带内部应变、应变率分布规律、断层带错动位移及带内孔隙度分布规律，为韧性断层带定量分析提供了新的手段。此外，该理论还可对直剪试验机——岩样系统不稳定性进行分析，系统失稳可比拟为断层岩爆。发展基于梯度塑性理论尺度律及失稳判据等解析解一方面可加深对岩石变形、破坏的理解；另一方面。还可用来检验数值结果的正确性。 相似文献
8.
Strain localization developing inside soft rock specimens is examined through experimental observation and numerical simulation. In the experimental study, soft rock specimens are sheared at different strain rates under plane strain conditions and deformation and strain localization characteristics are analysed. Transition of localization mode from highly localized mode for higher strain rate to distributed and diffused mode of strain localization for lower strain rates was observed. In the numerical study, simulations of plane strain compression tests are carried out at different strain rates by using an overstressed‐type elasto‐viscoplastic model in finite element computations. The role of strain rates on setting gradients of strain fields across shear band is clarified. The probable mechanism for transition of localization mode is discussed. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
9.
The appearance of shear banding in granular materials has been investigated intensively during the last decades and is still of ongoing importance in terms of understanding the stress–strain behaviour of the material, the localization phenomena and the interaction between soil and structure. Only less attention has been paid to the occurrence of systems of shear bands although such systems can be identified in geotechnical structures as well as in geological formations. In this paper we present results of experiments on sand specimens under extensional load in natural gravity as well as in increased gravity in the centrifuge where the influence of the stress level on the geometry of a shear band pattern, specified by the spacing of the shear bands and the angle between failure surfaces and minor stress direction, has been investigated. X‐ray technique has been used to visualize the failure zones inside the specimen, an optical measurement system called Digital Image Correlation has been applied to identify and observe the appearing deformation mechanism on the sides of the specimens in natural gravity as well as during the flight in the centrifuge. It can be shown that the geometry of the shear band pattern is sparsely influenced by the change of the stress level. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
10.
在平面应变压缩条件下,采用拉格朗日元法研究了材料缺陷对岩样应变局部化及宏观力学行为的影响。在数值计算中,采用了莫尔-库仑与拉破坏复合的破坏准则,峰后岩石的本构关系为线性应变软化。对于理想岩样（不含任何缺陷）,从剪切应变率的等值线图及变形网格图发现,变形场相对试样垂直对称轴对称。在试样的边界上设置材料缺陷后,变形场的对称性被打破。材料缺陷附近是局部化现象启动的主要位置。与不含材料缺陷试样相比,含缺陷试样的局部化提前启动。当缺陷位于试样左边界中部附近时,试样内部出现多条剪切带,发生韧性剪切破坏,峰后应力-轴向应变曲线和应力-侧向应变曲线均倾向于韧性,岩样的稳定性增强;当缺陷位于试样上、下端面附近时,仅出现一条贯穿试样左右边界的剪切带,发生脆性剪切破坏,峰后两种曲线倾向于脆性,易发生失稳破坏。从数值结果中还观测到了剪切带的跳跃或迁移现象及剪切带的相互竞争、此消彼涨的现象。当岩样中不包含任何缺陷时,试样应力-变形曲线的峰值强度最高。随着缺陷的上移,峰值强度下降,直到峰值强度基本保持不变。缺陷越接近于岩样的下端,对岩样应力-变形曲线的峰值强度的影响越小。 相似文献
11.
Yuki Yamakawa Kiyohiro Ikeda Isao Saiki Jacques Desrues Reiko J. Tanaka 《国际地质力学数值与分析法杂志》2018,42(1):3-33
Shear bands with characteristic spatial patterns observed in an experiment for a cubic or parallelepiped specimen of dry dense sand were simulated by numerical bifurcation analysis using the Cam‐clay plasticity model. By incorporating the subloading surface concept into the plasticity model, the model became capable of reproducing hardening/softening and contractive/dilative behavior observed in the experiment. The model was reformulated to be compatible with the multiplicative hyperelasto‐plasticity for finite strains. This enhanced constitutive model was implemented into a finite‐element code reinforced by a stress updating algorithm based on the return‐mapping scheme, and by an efficient numerical procedure to compute critical eigenvectors of elastoplastic tangent stiffness matrix at bifurcation points. The emergence of diamond‐ and column‐like diffuse bifurcation modes breaking uniformity of the materials, followed by the evolution of shear bands through strain localization, was observed in the analysis. In the bifurcation analysis of plane strain compression test, unexpected bifurcation modes, which broke out‐of‐plane uniformity and led to 3‐dimensional diamond‐like patterns, were detected. Diffuse bifurcations, which were difficult to observe by experiments, have thus been found as a catalyst creating diverse shear band patterns. 相似文献
12.
基于梯度塑性本构理论的岩样侧向变形分析(II): 尺寸效应及弹性回跳 总被引：8，自引：0，他引：8
提出了利用不同尺寸试件的轴向应力-应变曲线得到轴向应力-侧向应变曲线的一种方法，并研究了结构尺寸对轴向应力-侧向应变曲线的影响。根据尺寸不同试件的轴向应力-轴向应变曲线的实验结果，并基于梯度塑性理论的解析解，在应变软化阶段，确定出了各种试件的剪切带条数。由此求出了不同宽度试样的轴向应力-侧向应变曲线。剪切带条数与试件宽度之比是决定轴向应力-侧向应变曲线特征的关键指标。若该比率为常量，则上述曲线不具有尺寸效应。当宽试件及窄试件在局部化启动后，在试件内部都出现一条剪切带时，随着试件宽度的增加，该曲线越陡，甚至出现回跳。上述方法也可用于分析轴向应力-环向应变曲线的尺寸效应问题。尺寸效应的原因是局部化，但局部化并非总引起尺寸效应。 相似文献
13.
应变软化扩容对含随机缺陷岩石的渐进变形及破坏前兆特征的影响 总被引：3，自引：3，他引：0
在单轴平面应变压缩条件下, 采用FLAC模拟了剪切扩容对含随机缺陷岩石破坏前兆及变形特征的影响。密实的岩石服从莫尔库仑剪破坏与拉破坏复合的破坏准则, 破坏之后呈现应变软化-理想塑性行为。缺陷在破坏之后经历理想塑性行为。随着轴向应变的增加, 试样内部破坏的单元数目增加, 直到达到一个常数, 该常数随着扩容角的增加而增加。当扩容角较高时, 计算得到的泊松比在峰前就可以超过0.5;剪切扩容于峰前发生; 变形后试样的最终体积大于初始体积。剪切局部化(导致了毗邻块体之间的相对滑动)及剪切扩容(发生于剪切带内部)是非零扩容角试样峰后体积膨胀的原因。在峰前, 通过观察剪切应变增量、破坏的单元数目、侧向应变、计算得到的泊松比及体积应变可以发现, 扩容角越高, 试样破坏的前兆越明显。在低扩容角时, 由于弯曲的剪切带边界, 试样内部充分发展的剪切带的倾角比较分散, 剪切带的倾角更接近Arthur理论。 相似文献
14.
A computational framework is presented for dynamic strain localization and deformation analyses of water‐saturated clay by using a cyclic elasto‐viscoplastic constitutive model. In the model, the nonlinear kinematic hardening rule and softening due to the structural degradation of soil particles are considered. In order to appropriately simulate the large deformation phenomenon in strain localization analysis, the dynamic finite element formulation for a two‐phase mixture is derived in the updated Lagrangian framework. The shear band development is shown through the distributions of viscoplastic shear strain, the axial strain, the mean effective stress, and the pore water pressure in a normally consolidated clay specimen. From the local stress–strain relations, more brittleness is found inside the shear bands than outside of them. The effects of partially drained conditions and mesh‐size dependency on the shear banding are also investigated. The effect of a partially drained boundary is found to be insignificant on the dynamic shear band propagation because of the rapid rate of applied loading and low permeability of the clay. Using the finer mesh results in slightly narrower shear bands; nonetheless, the results manifest convergency through the mesh refinement in terms of the overall shape of shear banding and stress–strain relations. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
15.
It has been known that classical continuum mechanics laws fail to describe strain localization in granular materials due to the mathematical ill‐posedness and mesh dependency. Therefore, a non‐local theory with internal length scales is needed to overcome such problems. The micropolar and high‐order gradient theories can be considered as good examples to characterize the strain localization in granular materials. The fact that internal length scales are needed requires micromechanical models or laws; however, the classical constitutive models can be enhanced through the stress invariants to incorporate the Micropolar effects. In this paper, Lade's single hardening model is enhanced to account for the couple stress and Cosserat rotation and the internal length scales are incorporated accordingly. The enhanced Lade's model and its material properties are discussed in detail; then the finite element formulations in the Updated Lagrangian Frame (UL) are used. The finite element formulations were implemented into a user element subroutine for ABAQUS (UEL) and the solution method is discussed in the companion paper. The model was found to predict the strain localization in granular materials with low dependency on the finite element mesh size. The shear band was found to reflect on a certain angle when it hit a rigid boundary. Applications for the model on plane strain specimens tested in the laboratory are discussed in the companion paper. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
16.
岩石试件端面摩擦效应数值模拟研究 总被引：3，自引：0，他引：3
试件端面摩擦效应直接影响试件内的塑性等效应变、侧向位移的分布和单元应力应变曲线。本文运用ANSYS中的接触单元模拟了平面应变状态下端面摩擦效应对塑性等效应变、侧向位移和单元应力应变曲线的影响,得到了不同摩擦系数时塑性等效应变及侧向位移的渐进变化形式。当接触面摩擦较小时,塑性等效应变图案为上下两个X形网络,侧向位移上下分布均匀;当接触面摩擦增大时,塑性等效应变网络向中部靠拢并且明显增大,侧向位移上下分布不均匀,中部较上下端面位移大;当试件端面侧向位移被限制,即摩擦力很大时,塑性等效应变网络变为一个X形局部化带,侧向位移分布更加不均匀,中部明显隆起。 相似文献
17.
利用FLAC内嵌语言编制的计算平面应变压缩岩样轴向、侧向、体积应变及泊松比的FISH函数,计算了弹性模量不同时单缺陷岩样的全部变形特征,研究了弹性模量对岩样的破坏过程及前兆的影响。在峰前及峰后,岩石的本构模型分别取为线弹性模型及莫尔-库仑剪破坏与拉破坏复合的应变软化模型。当弹性模量不是较高时,岩样自始至终仅出现一条倾斜的剪切带。当弹模较高时,最终剪切应变仅强烈集中于贯通岩样的剪切带内部。剪切带倾角在Arthur与Coulomb倾角之间,且随弹模的增加而降低,经典理论对此不能解释。随着弹模的增加,峰值应力增加,峰前的应力-轴向应变曲线变得陡峭,峰后的应力-轴向应变曲线的斜率几乎不变。随着弹模的增加,峰值强度所对应的轴向应变及侧向应变的大小均降低;应力-侧向应变曲线软化段变得陡峭。随着弹模的降低,侧向应变-轴向应变曲线、泊松比-轴向应变曲线及体积应变-轴向应变曲线在峰前发生转折（偏离线性状态）的程度越来越大;非弹性轴向应变增加;材料缺陷附近的最大剪切应变增量增加。岩样破坏的前兆随着弹性模量的降低而逐渐增强。 相似文献
18.
考虑塑性应变率梯度的单轴压缩岩样轴向响应 总被引：9，自引：7，他引：2
基于剪切应变率梯度格式,采用解析方式研究了岩石材料在单轴压缩条件下的应变软化的结构响应。根据非局部连续介质模型,提出了一维二阶剪切应变率梯度格式。非局部剪切应变率与局部剪切应变率及其二阶梯度有关。将经典塑性理论中的局部剪切应变率替换为非局部剪切应变率,可以直接得到局部剪切应变率的封闭解析解,而不必通过将局部剪切应变对时间求导获得。通过对局部剪切应变率积分,得到了沿剪切带方向的相对剪切速度。试件峰值强度后的端部速度由弹性及塑性两部分构成。前一部分由虎克定律描述;后一部分与相对剪切速度有关。对弹性及塑性两部分速度求和,得到了单轴压缩岩样剪切破坏问题轴向响应的解析式。研究表明：试样高度越大、内部长度越小、剪切软化模量越大及泊松比越小,则岩样的轴向响应倾向于脆性。根据岩样与矿柱的相似性,岩样响应倾向于脆性,意味着矿柱将失去稳定性,发生矿柱岩爆。目前的基于剪切应变率梯度格式的主要优点是简洁。 相似文献
19.
土工格栅加筋砂土的变形与破坏机理解析 总被引：8，自引：2，他引：8
利用可考虑局部破坏的非线性弹塑性有限元，对无加筋和加筋砂土的平面应变压缩试验结果进行了从小变形到破坏的全过程数值解析。加筋砂土试验体用土工格栅分6层和11层进行加筋加固。将等价二维有限元解析所得到的解析结果与试验得到的实测值进行了较为伞面的比较，结果表明：合理的二维非线性弹塑性有限元解析，不仅可以较为精确的模拟加筋砂土的平均心力-应变特性，而且还可以全面地调查试验体的局部应力-应变分布以及剪切破坏发生状况，从而，对加筋砂土的变彤破坏以及加筋材的加州机理有一个更加全面合理的认识。 相似文献
20.
单轴压缩岩样轴向回跳及侧向回跳理论研究 总被引：1，自引：0，他引：1
研究了单轴压缩条件下轴向回跳及侧向回跳之间的关系。在应变软化阶段,试样的弹性轴向应变及弹性侧向轴向应变由虎克定律确定;试样的轴向塑性应变及侧向塑性轴向应变由梯度塑性理论确定,它们与应力水平、剪切带倾角及宽度、软化模量及试样的尺寸有关。根据轴向应力-应变曲线及侧向应力-应变曲线软化段斜率的正负,得到了轴向回跳及侧向回跳的条件。轴向回跳的原因是轴向弹性应变的恢复快于轴向塑性应变的增加。侧向回跳的原因是侧向弹性应变的恢复快于侧向塑性应变的增加。当剪切带倾角的正切小于泊松比与试样宽高比之积时,若侧向变形发生回跳,则轴向变形就发生回跳;反之,若轴向变形发生回跳,则侧向变形就发生回跳。对于常规岩样,若侧向发生回跳,则轴向必定是回跳的。在应变软化阶段,根据轴向应变及侧向应变是否发生回跳,轴向应变与侧向应变曲线被划分为4种类型：即轴向回跳及侧向回跳情形、轴向回跳及侧向回跳情形、轴向不回跳及侧向回跳情形及轴向回跳及侧向不回跳情形,并得到了各种类型的条件。 相似文献