首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 27 毫秒
1.
Garnet peridotites from the southern Su‐Lu ultra‐high‐pressure metamorphic (UHPM) terrane, eastern China, contain porphyroblastic garnet with aligned inclusions comprising a low‐P–T mineral assemblage (chlorite, hornblende, Na‐gedrite, Na‐phlogopite, talc, spinel and pyrite). Orthopyroxene porphyroblasts show fine exsolution lamellae of clinopyroxene and minor chromite. A clinopyroxene inclusion in garnet shows some orthopyroxene exsolution lamellae. Both the rims of porphyroblastic pyroxene and garnet and the matrix pyroxene and garnet crystallized at the expense of olivine. This is interpreted as a result of metasomatism of the peridotites by an SiO2‐rich melt at UHP conditions. A chromian garnet further overgrew on the rims of the garnet. The XMg values (Mg/(Mg+Fe)) of porphyroblastic garnet decrease from core to rim and vary in different peridotite samples, while the compositions of both the porphyroblastic and the matrix pyroxene are similar in terms of Ca–Mg–Fe. The Mg‐rich cores of porphyroblastic garnet and orthopyroxene record high temperatures and pressures (c. 1000 °C, ≥5.1 GPa), whereas the matrix minerals, including the rims of porphyroblasts, record much lower P–T (c. 4.2 GPa, c. 760 °C). Sm–Nd data give apparent isochron ages of c. 380 Ma and negative εNd(0) values (c.?9). These dates are considered meaningless due to isotopic disequilibrium between garnet cores and the rest of the rocks. The isotopic disequilibrium was probably caused by metasomatism of the peridotites by melt/fluids derived from the coevally subducted crustal materials. On the other hand, the Rb–Sr isotopic systems of phlogopite and clinopyroxene appear to have reached equilibrium and record a cooling age of c. 205 Ma. It is suggested that the garnet peridotites were originally emplaced into a low‐P–T environment prior to the c. 220 Ma continental collision, during which they were subducted together with crustal rocks to mantle depth and subjected to UHP metamorphism. An important corollary is that at least some of the coevally subducted crustal rocks in the Su‐Lu terrane have been subjected to peak metamorphism at P–T conditions much higher than presently estimated (≥2.7 GPa, ≤800 °C).  相似文献   

2.
Creation of pathways for melt to migrate from its source is the necessary first step for transport of magma to the upper crust. To test the role of different dehydration‐melting reactions in the development of permeability during partial melting and deformation in the crust, we experimentally deformed two common crustal rock types. A muscovite‐biotite metapelite and a biotite gneiss were deformed at conditions below, at and above their fluid‐absent solidus. For the metapelite, temperatures ranged between 650 and 800 °C at Pc=700 MPa to investigate the muscovite‐dehydration melting reaction. For the biotite gneiss, temperatures ranged between 850 and 950 °C at Pc=1000 MPa to explore biotite dehydration‐melting under lower crustal conditions. Deformation for both sets of experiments was performed at the same strain rate (ε.) 1.37×10?5 s?1. In the presence of deformation, the positive ΔV and associated high dilational strain of the muscovite dehydration‐melting reaction produces an increase in melt pore pressure with partial melting of the metapelite. In contrast, the biotite dehydration‐melting reaction is not associated with a large dilational strain and during deformation and partial melting of the biotite gneiss melt pore pressure builds more gradually. Due to the different rates in pore pressure increase, melt‐enhanced deformation microstructures reflect the different dehydration melting reactions themselves. Permeability development in the two rocks differs because grain boundaries control melt distribution to a greater extent in the gneiss. Muscovite‐dehydration melting may develop melt pathways at low melt fractions due to a larger volume of melt, in comparison with biotite‐dehydration melting, generated at the solidus. This may be a viable physical mechanism in which rapid melt segregation from a metapelitic source rock can occur. Alternatively, the results from the gneiss experiments suggest continual draining of biotite‐derived magma from the lower crust with melt migration paths controlled by structural anisotropies in the protolith.  相似文献   

3.
Monazite is a common accessory phase in felsic granulite ribbon mylonites exposed in the Upper Deck domain of the Athabasca granulite terrane, western Canadian Shield. Field relationships, bulk rock geochemistry and phase equilibria modelling in the Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–Fe2O3 system are consistent with the garnet‐rich rocks representing the residual products of ultrahigh temperature melting of biotite‐bearing paragneisses driven by intraplating of mafic magma in continental lower crust. The c. 2.64–2.61 Ga Y‐rich resorbed monazite cores included in garnet are interpreted as relicts of detrital grains deposited on the Earth's surface after c. 2.61 Ga. Yttrium‐poor monazite domains in garnet are depleted in Sm and Gd and linked to fluid‐absent melting of biotite + plagioclase + quartz ± sillimanite during a prograde loading path from ≤0.8 to ≥1.4 GPa. The c. 2.61–2.55 Ga Y‐depleted, Th‐rich monazite domains crystallized in the presence of garnet + ternary feldspar ± orthopyroxene + peraluminous melt. The c. 2.58–2.52 Ga monazite rims depleted in Th + Ca and enriched in Eu are linked to localized melt extraction synchronous with growth of high‐pressure (HP) grossular‐rich garnet at the expense of plagioclase during crustal thickening, culminating at >950 °C. Re‐heating and dextral transpressive lower crustal reactivation at c. 1.9 Ga resulted in syn‐kinematic growth of (La + Ce)‐enriched monazite and a second generation of garnet, concurrent with recrystallization of feldspar and orthopyroxene at 1.0–1.2 GPa and 600–700 °C. Monazite grains in this study are marked by positive Eu‐anomalies relative to chondrite. A direct link is implied between Y, Sm, Eu and Gd in monazite and two major phases in continental lower crust: garnet and plagioclase. Positive Eu‐anomalies in lower crustal monazite associated with modally abundant garnet appear to be directly related to Eu‐enrichment and depletions of Y, Sm and Gd that are consequences of garnet growth and plagioclase breakdown during HP melting of peraluminous bulk compositions.  相似文献   

4.
There are many observations in naturally deformed rocks on the effects of mineral reactions on deformation, but few experimental data. In order to study the effects of chemical disequilibrium on deformation we have investigated the hydration reaction plagioclase + H2OM more albitic plagioclase + zoisite + kyanite + quartz. We utilized fine-grained (2-6 µm) plagioclase aggregates of two compositions (An54 and An60), both dried and with 0.1-0.4 wt% H2O present, in shear deformation experiments at two sets of conditions: 900 °C, 1.0 GPa (in the plagioclase stability field) and 750 °C, 1.5 GPa (in the zoisite stability field). Dry samples and those deformed in the plagioclase stability field underwent homogeneous shearing by dislocation creep, but samples with 0.1 to 0.4 wt% water deformed in the zoisite stability field showed extreme strain localization into very narrow (~1-3 µm) shear bands after low shear strain. In these samples the microstructures of reaction products in the matrix differ from those in the shear bands. In the matrix, large (up to 400 µm) zoisite crystals grew in the direction of finite extension, and relict plagioclase grains are surrounded by rims of recrystallized grains that are more albitic. In the shear bands, the reaction products albitic plagioclase, zoisite, white mica, and traces of kyanite form polyphase aggregates of very fine-grained (<0.1 µm) dislocation-free grains. Most of the sample strain after % ~2 has occurred within the shear bands, within which the dominant deformation mechanism is inferred to be diffusion-accommodated grain boundary sliding (DAGBS). The switch from dislocation creep in dry samples deformed without reaction to DAGBS in reacted samples is associated with a decrease in flow stress from ~800 to <200 MPa. These experiments demonstrate that heterogeneous nucleation driven in part by chemical disequilibrium can produce an extremely fine-grained polyphase assemblage, leading to a switch in deformation mechanism and significant weakening. Thus, localization of deformation in polyphase rocks may occur on any pressure (P),temperature (T)-path where the equilibrium composition of the constituent minerals changes.  相似文献   

5.
Garnet-bearing and garnet-free pyroxenite xenoliths from Quaternary basanites of Marsabit, northern Kenya, were analysed for microstructures and mineral compositions (major and trace elements) to constrain the thermal and compositional evolution of the lithospheric mantle in this region. Garnet-bearing rocks are amphibole-bearing websterite with ~5–10 vol% orthopyroxene. Clinopyroxene is LREE-depleted and garnet has high HREE contents, in agreement with an origin as cumulates from basaltic mantle melts. Primary orthopyroxene inclusions in garnet suggest that the parental melts were orthopyroxene-saturated. Rock fabrics vary from weakly to strongly deformed. Thermobarometry indicates extensive decompression and cooling (~970–1,100°C at ~2.3–2.6 GPa to ~700–800°C at ~0.5–1.0 GPa) during deformation, best interpreted as pyroxenite intrusion into thick Paleozoic continental lithosphere subsequently followed by continental rifting (i.e., formation of the Mesozoic Anza Graben). During continental rifting, garnet websterites were decompressed (garnet-to-spinel transition) and experienced the same P–T evolution as their host peridotites. Strongly deformed samples show compositional overlaps with cpx-rich, initially garnet-bearing lherzolite, best explained by partial re-equilibration of peridotite and pyroxenite during deformation and mechanical mingling. In contrast, garnet-free pyroxenites include undeformed, cumulate-like samples, indicating that they are younger than the garnet websterites. Major and trace element compositions of clinopyroxene and calculated equilibrium melts suggest crystallisation from alkaline basaltic melt similar to the host basanite, which suggests formation in the context of alkaline magmatism during the development of the Kenya rift. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.  相似文献   

6.
In an attempt to obviate some of the difficulties inherent in using natural rocks to study experimentally the rheology of partially-molten granitic rocks, we report some preliminary experiments using hot-pressed synthetic aggregates, with quartz as the solid phase and a quartz–albite glass to form the melt phase. Undrained constant displacement rate and stress relaxation experiments were performed at 1100 °C and 300 MPa total confining pressure using nominally 16 and 28 wt% anhydrous melt, and at 980 °C with 12 wt% of water-saturated melt. Strain rate varies non-linearly with stress, corresponding to a stress exponent of 3.6 for the anhydrous melt tests, and 1.9 with the wet melt. Strain rate is enhanced about 160-fold through doubling the melt fraction from 16 wt%. Intracrystalline plasticity appears to contribute insignificantly to the observed deformation, and the preservation of relatively equant grains implies a granular flow process. Microcracking occurs during isostatic hot-pressing, and also contributes to subsequent non-isostatic deformation at high stresses and strain rates. Models of flow of partially molten rock that assume diffusive transfer accommodation of granular flow predict linear viscosity but only at lower strain rates than accessed experimentally. It is suggested that the non-linear granular flow observed in these experiments involved the episodic unsticking of sintered contacts between grains by a rate-dependent cracking and/or dislocation accommodation process.  相似文献   

7.
A structural, petrological and geochronological (U‐Th‐Pb of zircon and monazite) study reveals that the lower crust sequences of the Variscan high‐grade basement cropping out between Solenzara and Porto Vecchio, south‐east Corsica (France) have been tectonically juxtaposed along with middle crustal rocks during the extrusion of the orogenic root of the Variscan chain. We propose that a system of high‐temperature, orogen‐parallel shear zones that developed under a transpressive dextral tectonic regime caused the exhumation of the entire sequence. This tectonic complex is thus made up of rocks having undergone different P–T conditions (eclogite‐?, high‐pressure granulite facies and amphibolite facies) at different times, reflecting the progressive foreland migration of the orogenic front. The Solenzara granulites were derived from burial of continental crust to high‐pressure (1.8–1.4 GPa) and high‐ to ultrahigh‐temperature conditions (900–1000 °C) during the Variscan convergence: U–Pb ELA‐ICPMS zircon dating constrained the timing of this metamorphism at c. 360 Ma. The gneisses cropping out at Porto Vecchio are middle crustal‐level rocks that reached their peak temperature conditions (700–750 °C at <1.0 GPa) at c. 340 Ma. The diachronism of the metamorphic events, the foliation patterns and their geometry suggest that the granulites were exhumed to middle crustal levels through channel flow tectonics under continuous compression. The amphibolite facies gneisses of Porto Vecchio and the granulites of Solenzara were accreted through the development of a major dextral mylonitic zone forming under amphibolite facies conditions: in situ monazite isotope dating (ELA‐ICPMS) revealed that this deformation occurred at c. 320 Ma and was accompanied by the emplacement of syntectonic high‐K melts. A final HTLP static overprint, constrained at 312–308 Ma by monazite U‐Th‐Pb isotope dating, is related to the emplacement of the igneous products of the Sardinia‐Corsica batholith and marks the transition from the Variscan orogenic event to the Permian extension.  相似文献   

8.
Magmatic arcs are zones of high heat flow; however, examples of metamorphic belts formed under magmatic arcs are rare. In the Pontides in northern Turkey, along the southern active margin of Eurasia, high temperature–low pressure metamorphic rocks and associated magmatic rocks are interpreted to have formed under a Jurassic continental magmatic arc, which extends for 2800 km through the Crimea and Caucasus to Iran. The metamorphism and magmatism occurred in an extensional tectonic environment as shown by the absence of a regional Jurassic contractional deformation, and the presence of Jurassic extensional volcaniclastic marine basin in the Pontides, over 2 km in thickness, where deposition was coeval with the high‐T metamorphism at depth. The heat flow was focused during the metamorphism, and unmetamorphosed Triassic sequences crop out within a few kilometres of the Jurassic metamorphic rocks. The heat for the high‐T metamorphism was brought up to crustal levels by mantle melts, relicts of which are found as ultramafic, gabbroic and dioritic enclaves in the Jurassic granitoids. The metamorphic rocks are predominantly gneiss and migmatite with the characteristic mineral assemblage quartz + K‐feldspar + plagioclase + biotite + cordierite ± sillimanite ± garnet. Mineral equilibria give peak metamorphic conditions of 4 ± 1 kbar and 720 ± 40 °C. Zircon U–Pb and biotite Ar–Ar ages show that the peak metamorphism took place during the Middle Jurassic at c. 172 Ma, and the rocks cooled to 300 °C at c. 162 Ma, when they were intruded by shallow‐level dacitic and andesitic porphyries and granitoids. The geochemistry of the Jurassic porphyries and volcanic rocks has a distinct arc signature with a crustal melt component. A crustal melt component is also suggested by cordierite and garnet in the magmatic assemblage and the abundance of inherited zircons in the porphyries.  相似文献   

9.
High‐MgAl rocks occur as xenoliths (up to 2 m in diameter) in mafic granulites at a newly discovered locality near Anakapalle. Following an early phase of deformation, ultrahigh‐temperature (UHT) metamorphism and near‐isothermal decompression, the rocks were intruded in a lit‐par‐lit manner by felsic melts (charnockite), which caused local‐scale metasomatism. A subsequent deformation produced isoclinal folds and the distinct gneissic foliation of the charnockite still at granulite facies conditions. The sequence of multiphase reaction textures in the high‐MgAl xenoliths reflects the changes of physico‐chemical conditions during the polyphase evolution of the terrane; UHT metamorphism (stage 1, > 1000°C, c. 10 kbar) is documented by relics of extremely coarse grained domains with the assemblage orthopyroxene (opx)1 + garnet (grt)1 + sapphirine (spr)1 + spinel (spl)1 + rutile (rt). A subsequent phase of near‐isothermal decompression in the order of 1–2 kbar (stage 2) resulted in extensive replacement of grt1 and opx1 megacrysts by lamellar (opx2 + spr2) symplectites. The intrusion of felsic melt (stage 3) led to the development of a narrow metasomatic black wall reaction zone (bt + sil + plg3 + opx2,3 + rt) at the immediate contact of the xenoliths and in melt infiltration zones to the partial replacement of (opx2 + spr2) symplectites by biotite and sillimanite and/or plg3, mainly at the expense of orthopyroxene, with concomitant coarsening of the intergrowth texture. The subsequent deformation (stage 4) further modified the symplectite textures through polygonization, recrystallization and grain‐size coarsening. The deformation was followed by a period of cooling and decompression (stage 5, c. 800°C, 4–7 kbar) as indicated by local growth of late garnet (grt5) at the expense of (opx + spr + plg) domains at static conditions. Recently published isotope data suggest that the multistage evolution of the high‐MgAl granulites at Anakapalle followed a discontinuous P–T trajectory that may be related to heating of the crust through magmatic accretion culminating in deep‐crustal UHT metamorphism at 1.4 Ga (stage 1), fast uplift of the UHT granulites into mid‐crustal levels as a consequence of extensional tectonics (stage 2), emplacement of felsic magmas in the Grenvillian (at c. 1 Ga, stage 3) resulting in reheating of the crust to high–T conditions followed by a phase of compressional tectonics (stage 4) and a period of cooling to the stable geotherm (stage 5) still in the Grenvillian.  相似文献   

10.
New structural and tectono‐metamorphic data are presented from a geological transect along the Mugu Karnali valley, in Western Nepal (Central Himalaya), where an almost continuous cross‐section from the Lesser Himalaya Sequence to the Everest Series through the medium‐high‐grade Greater Himalayan Sequence (GHS) is exposed. Detailed meso‐ and micro‐structural analyses were carried out along the transect. Pressure (P)–temperature (T) conditions and P–T–deformation paths for samples from different structural units were derived by calculating pseudosections in the MnNKCFMASHT system. Systematic increase of P–T conditions, from ~0.75 GPa to 560 °C up to ≥1.0 GPa–750 °C, has been detected starting from the garnet zone up to the K‐feldspar + aluminosilicate zone. Our investigation reveals how these units are characterized by different P–T evolutions and well‐developed tectonic boundaries. Integrating our meso‐ and micro‐structural data with those of metamorphism and geochronology, a diachronism in deformation and metamorphism can be highlighted along the transect, where different crustal slices were underthrust, metamorphosed and exhumed at different times. The GHS is not a single tectonic unit, but it is composed of (at least) three different crustal slices, in agreement with a model of in‐sequence shearing by accretion of material from the Indian plate, where coeval activity of basal thrusting at the bottom with normal shearing at the top of the GHS is not strictly required for its exhumation.  相似文献   

11.
Experimental deformation of partially melted granitic aggregates   总被引：16，自引：1，他引：16  
Abstract The effects of varying amounts of partial melt on the deformation of granitic aggregates have been tested experimentally at conditions (900°C, 1500 MPa, 10-4 to 10-6/s) where melt-free samples deform by dislocation creep, with microstructures approximately equivalent to those of upper greenschist facies. Experiments were performed on samples of various grain sizes, including an aplite (150 μm) and sintered aggregates of quartz-albitemicrocline (10–50 and 2–10 μm). Water was added to the samples to obtain various amounts of melt (1–15% in the aplite, 1–5% in the sintered aggregates). Optical and TEM observations of the melt distribution in hydrostatically annealed samples show that the melt in the sintered aggregates is homogeneously distributed along an interconnected network of triple junction channels, while the melt in the aplites is inhomogeneously distributed. The effect of partial melt on deformation depends an melt amount and distribution, grain size and strain rate. For samples deformed with ? 1% melt, all grain sizes exhibit microstructures indicative of dislocation creep. For samples deformed with 3–5% melt, the 150 μm and 10–50 μm grain size samples also exhibit dislocation creep microstructures, but the 2–10 μm grain size samples exhibit abundant TEM-scale evidence of dissolution-precipitation and little evidence of dislocation activity, suggesting a switch in deformation mechanism to predominantly melt-enhanced diffusion creep. At natural strain rates melt-enhanced diffusion creep would predominate at larger grain sizes, although probably not for most coarse-grained granites. The effects of melt percentage and strain rate have been studied for the 150 μm aplites. For samples with ? 5 and 10% melt, deformation at 10–6/s squeezes excess melt out of the central compressed region allowing predominantly dislocation creep. Conversely, deformation at 10-5/s produces considerable cataclasis presumably because the excess melt cannot flow laterally fast enough and a high pore fluid pressure results. For samples with 15% melt, deformation at both strain rates produces cataclasis, presumably because the inhomogeneous melt distribution resulted in regions of decoupled grains, which would produce high stress concentrations at point contacts. At natural strain rates there should be little or no cataclasis if an equilibrium melt texture exists and if the melt can flow as fast as the imposed strain rate. However, if the melt is confined and cannot migrate, a high pore fluid pressure should promote brittle deformation.  相似文献   

12.
We performed deformation experiments on a foliated mylonite under high temperature and pressure conditions in this study. To investigate the effect of pre‐existing fabric on the rheology of rocks, our samples were drilled from natural mylonite with the cylinder axis parallel to the foliation (PAR) and perpendicular to the foliation (PER). We performed 25 tests on seven PAR samples and 21 tests on seven PER samples at temperatures ranging from 600 to 890 °C, confining pressures ranging from 800 to 1400 MPa, and steady‐state strain rates of 1 × 10−4, 1 × 10−5 and 2.5 × 10−6 s−1. In the temperatures of 600–700 °C, the deformation is accommodated by semi‐brittle flow, with the average stress exponent being 6–7 assuming power law flow; in the temperature range of 800–890 °C, deformation is mainly by plastic flow, with an average stress exponent of n = 3 and activation energies of Q = 354 ± 52 kJ/mol (PER and PAR samples). The experimental results show that the strengths of PER samples are higher than those of PAR samples. Deformation microstructures have been studied by optical and electron microscopy. The original foliation of PER samples is destroyed by deformation and replaced by a new foliation, but the deformation of PAR samples followed the original foliation. Electron backscatter diffraction (EBSD) measurements show a strong lattice preferred orientation (LPO) of the quartz c axis fabrics of the starting samples and deformed PER and PAR samples. However, the c axis fabric of quartz in experimentally deformed PER and PAR samples varied with temperature and strain rate is different from that seen in the starting mylonite sample. The initial quartz c axis fabric of the starting mylonite sample has been transformed into a new fabric during experimental deformation. Dehydration melting of biotite and hornblende occurred in both PER and PAR samples at temperatures of 800–890 °C. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

13.
The Proterozoic belts that occur along the margins of the West Australian Craton, as well as those in intraplate settings, generally share similar geological histories that suggest a common plate‐margin driver for orogeny. However, the thermal drivers for intraplate orogenesis are more poorly understood. The Mutherbukin Tectonic Event records a protracted period of Mesoproterozoic reworking of the Capricorn Orogen and offers significant insight into both the tectonic drivers and heat sources of long‐lived intraplate orogens. Mineral assemblages and tectonic fabrics related to this event occur within a 50 km‐wide fault‐bound corridor in the central part of the Gascoyne Province in Western Australia. This zone preserves a crustal profile, with greenschist facies rocks in the north grading to upper amphibolite facies rocks in the south. The P–T–t evolution of 13 samples from 10 localities across the Mutherbukin Zone is investigated using phase equilibria modelling integrated with in situ U–Pb monazite and zircon geochronology. Garnet chemistry from selected samples is used to further refine the P–T history and shows that the dominant events recorded in this zone are prolonged D1 transpression between c. 1,320 and 1,270 Ma, followed by D2 transtension from c. 1,210 to 1,170 Ma. Peak metamorphic conditions in the mid‐crust reached >650°C and 4.4–7 kbar at c. 1,210–1,200 Ma. Most samples record a single clockwise P–T evolution during this event, although some samples might have experienced multiple perturbations. The heat source for metamorphism was primarily conductive heating of radiogenic mid‐ and upper crust, derived from earlier crustal differentiation events. This crust was thickened during D1 transpression, although the thermal effects persisted longer than the deformation event. Peak metamorphism was terminated by D2 transtension at c. 1,210 Ma, with subsequent cooling driven by thinning of the radiogenic crust. The coincidence of a sedimentary basin acting as a thermal lid and a highly radiogenic mid‐crustal batholith restricted to the Mutherbukin Zone accounts for reworking being confined to a discrete crustal corridor. Our results show that radiogenic regions in the shallow to mid crust can elevate the thermal gradient and localize deformation, causing the crust to be more responsive to far‐field stresses. The Mutherbukin Tectonic Event in the Capricorn Orogen was synchronous with numerous Mesoproterozoic events around the West Australian Craton, suggesting that thick cratonic roots play an important role in propagating stresses generated at distant plate boundaries.  相似文献   

14.
Linking the deformation history of mylonitized continental rocks to the progress of devolatilization reactions that trigger reaction softening is critical for the understanding of crustal scale processes. We have analysed the field geometries and microstructures of deformed rocks within the southern Hercynian belt in Calabria, as well as modelled the pressure–temperature–deformation (P–T–d) trajectory of a main ductile shear zone that tectonically coupled the deeper crustal Mammola Paragneiss Unit with the upper crustal Stilo–Pazzano Phyllite Unit. P–T modelling of the mylonitic Mammola Paragneiss Unit was performed through calculation of phase equilibrium diagrams with the software thermocalc in the MnNCKFMASHTO model system. The prograde P–T–d trajectory is based on the zoning profiles of garnet porphyroblasts and their mineral inclusions, primarily barroisite and epidote. P–T modelling shows that peak metamorphic conditions of ~0.9 GPa and 585°C were reached during a Dn-1 under-thrusting event. The following exhumation during the Dn mylonitic event, and contact metamorphism during Dn+1 and Dn+2 folding events, have also been modelled because they are essential to restore the previous tectono-metamorphic history. The exhumation trajectory was modelled down to 0.3 GPa with temperatures of 440–460°C, under fluid-deficient conditions, as well as the final late Carboniferous contact metamorphism up to Tmax of 680–720°C. The prograde path shows clear evidence for thermal buffering during garnet growth at the expense of chlorite, with a heating-dominated stage after chlorite breakdown. Subsequently, a rheological change associated with epidote breakdown (i.e. reaction softening) occurred, highlighted by a net steepening of the P/T trajectory towards the pressure peak. On the basis of the barroisite inclusions within garnet porphyroblasts as well as the ‘hairpin’ shape of the reconstructed P–T–d path (before contact metamorphism), we infer that the unusual low T/P gradient for the Hercynian crust exposed in the Mammola Paragneiss Unit records its involvement in the Palaeotethys–Gondwana subduction beneath Laurussia during Dn-1 under-thrusting. We present a new palaeotectonic interpretation along the southern Hercynian belt in Calabria during the Upper Mississippian–Lower Pennsylvanian, that is consistent with previous geochronology studies.  相似文献   

15.
A high‐P granulite facies gneiss complex occurs in north‐west Payer Land (74°28′?74°47′N) in the central part of the East Greenland Caledonian (Ordovician–Devonian) orogen. High‐P metamorphism of the Payer Land gneiss complex resulted in formation of the assemblages Grt + Cpx + Amp + Qtz + Ru ± Pl in mafic rocks, and Grt + Ol + Cpx + Opx + Spl in rare ultramafic pods. Associated metapelites experienced anatexis in the kyanite stability field. Peak metamorphic assemblages formed around 800–850 °C at pressures of c. 1.4–1.7 GPa, corresponding to crustal depths of c. 50 km. Mafic granulites contain abundant reaction textures, including the replacement of garnet by symplectites of Opx + Spl + Pl, indicating that the high‐P event was followed by decompression while the granulites remained at elevated temperatures. Charnockitic gneisses from Payer Land show evidence of late Archean (c. 2.8–2.4 Ga) crustal growth and subsequent Palaeoproterozoic (c. 1.85 Ga) metamorphism. The gneiss complex experienced intense reworking during the Caledonian continental collision. On the basis of Caledonian monazite ages recorded from the high‐P anatectic metapelites, the clockwise P–T evolution and formation of the high‐P granulite facies assemblages is related to Caledonian crustal thickening, which resulted in formation of eclogites approximately 300 km north of Payer Land. The Payer Land granulites comprise a metamorphic core complex, which is separated from the overlying low‐grade supracrustal rocks (the Neoproterozoic Eleonore Bay Supergroup) by a late Caledonian extensional fault zone, the Payer Land Detachment. The steep, nearly isothermal, unloading P–T path recorded by the granulites can be explained by erosional and tectonic unroofing along the Payer Land Detachment.  相似文献   

16.
The South Karakorum margin, east of the Himalayan syntaxis, consist of an E–W elongated zone of young (10–3 Ma) high‐grade metamorphic rocks (M2) and related migmatitic domes. This late tectono‐metamorphic event post‐dates the Palaeogene (55–37 Ma) phase of thickening of the belt featured by NW–SE structures and associated M1 amphibolite facies metamorphism (0.7 GPa, 700 °C). This M2 metamorphism is characterised by low‐pressure, high‐temperature conditions coeval with migmatite formation in response to a thermal increase of c. 150 °C compared to M1, culminating at a temperature of c. 770 °C and a pressure of 0.5–0.6 GPa. Rapid exhumation of migmatitic domes, at a rate of 5 mm yr?1, was accommodated by vertical extrusion, in the core of E–W crustal‐scale folds. These crustal‐scale folds formed in response to N–S syn‐collisional shortening and were enhanced by thermal weakening of the migmatised continental crust. M2 metamorphism is spatially and temporarily associated with granitoids showing a mantle affinity, firmly suggesting that this could be the advective heat source for the granite and syenite generation and the subsequent migmatisation of the mid‐crustal level. Such relationships between a mantle‐related magmatism and a high‐temperature metamorphism in a convergent shortening context are suggestive of the breakoff of the subducted Indian slab since 20 Ma.  相似文献   

17.
The alpine-type ultrabasic rocks of the studied area have undergone plastic deformation under a temperature about 800--1200℃, a pressure about 0.9--1.68 GPa and differential stress of 0.2--0.35 GPa in relatively dry conditions, forming ultrabasie mylonite with porphyroclastic and mylonitic textures, Primary crystallized silicate melt inclusions and melt-fluid inclusions are discovered in porphyroclastic minerals and ore-forming chrome spinel. These rocks are formed under relatively stable physico-chemical conditions through liquid immiscibility of silicate melts, at 1200°-- 1300° and 1.1--1.38 GPa, equivalent to a depth of 40--50 km. No inclusion has been found in recrystallized secondary olivine and pyroxene, indicating that the plastic deformation happened after the formation of the rocks.  相似文献   

18.
The Legs Lake shear zone is a crustal‐scale thrust fault system in the western Canadian Shield that juxtaposes high‐pressure (1.0+ GPa) granulite facies rocks against shallow crustal (< 0.5 GPa) amphibolite facies rocks. Hangingwall decompression is characterized by breakdown of the peak assemblage Grt + Sil + Kfs + Pl + Qtz into the assemblage Grt + Crd + Bt ± Sil + Pl + Qtz. Similar felsic granulite occurs throughout the region, but retrograde cordierite is restricted to the immediate hangingwall of the shear zone. Textural observations, petrological analysis using P–T/P–MH2O phase diagram sections, and in situ electron microprobe monazite geochronology suggest that decompression from peak conditions of 1.1 GPa, c. 800 °C involved several distinct stages under first dry and then hydrated conditions. Retrograde re‐equilibration occurred at 0.5–0.4 GPa, 550–650 °C. Morphology, X‐ray maps, and microprobe dates indicate several distinct monazite generations. Populations 1 and 2 are relatively high yttrium (Y) monazite that grew at 2.55–2.50 Ga and correspond to an early granulite facies event. Population 3 represents episodic growth of low Y monazite between 2.50 and 2.15 Ga whose general significance is still unclear. Population 4 reflects low Y monazite growth at 1.9 Ga, which corresponds to the youngest period of high‐pressure metamorphism. Finally, population 5 is restricted to the hydrous retrograded granulite and represents high Y monazite growth at 1.85 Ga that is linked directly to the synkinematic garnet‐consuming hydration reaction (KFMASH): Grt + Kfs + H2O = Bt + Sil + Qtz. Two samples yield weighted mean microprobe dates for this population of 1853 ± 15 and 1851 ± 9 Ma, respectively. Subsequent xenotime growth correlates with the reaction: Grt + Sil + Qtz + H2O = Crd. We suggest that the shear zone acted as a channel for fluid produced by dehydration of metasediments in the underthrust domain.  相似文献   

19.
Contacts between rocks recording large differences in metamorphic grade are indicative of major tectonic displacements. Low-P upon high-P contacts are commonly interpreted as extensional (i.e. material points on either side of the contact moved apart relative to the palaeo-horizontal), but dating of deformation and metamorphism is essential in testing such models. In the Western Alps, the Piemonte Ophiolite consists of eclogites (T ≈550–600 °C and P≈18–20 kbar) structurally beneath greenschist facies rocks (T ≈400 °C and P≈9 kbar). Mapping shows that the latter form a kilometre-wide shear zone (the Gressoney Shear Zone, GSZ) dominated by top-SE movement related to crustal extension. Rb–Sr data from micas within different GSZ fabrics, which dynamically recrystallized below their blocking temperature, are interpreted as deformation ages. Ages from different samples within the same fabric are reproducible and are consistent with the relative chronology derived from mapping. They show that the GSZ had an extensional deformation history over a period of c. 9 Myr between c. 45–36 Ma. This overlaps in time with the eclogite facies metamorphism. The GSZ operated over the entire period during which the footwall evolved from eclogite to greenschist facies and was therefore responsible for eclogite exhumation. The discrete contact zone between eclogite and greenschist facies rocks is the last active part of the GSZ and truncates greenschist facies folds in the footwall. These final movements were therefore not a major component of eclogite exhumation. Pressure estimates associated with old and young fabrics within the GSZ are comparable, indicating that during extensional deformation there was no significant unroofing of the hangingwall. Since there are no known extensional structures younger than 36 Ma at higher levels in this part of the Alps, exhumation since the final juxtaposition of the two units (at 36 Ma) seems to have been dominated by erosion. Key words: deformation age, eclogite, exhumation, Rb–Sr dating, tectonic.  相似文献   

20.
The Lago di Cignana ultra‐high‐pressure unit (LCU), which consists of coesite–eclogite facies metabasics and metasediments, preserves the most deeply subducted oceanic rocks worldwide. New constraints on the prograde and early retrograde evolution of this ultra‐high pressure unit and adjoining units provide important insights into the evolution of the Piemontese–Ligurian palaeo‐subduction zone, active in Paleocene–Eocene times. In the LCU, a first prograde metamorphic assemblage, consisting of omphacite + Ca‐amphibole + epidote + rare biotite + ilmenite, formed during burial at estimated P < 1.7 GPa and 350 < T < 480 °C. Similar metamorphic conditions of 400 < T < 650 °C and 1.0 < P < 1.7 GPa have been estimated for the meta‐ophiolitic rocks juxtaposed to the LCU. The prograde assemblage is partially re‐equilibrated into the peak assemblage garnet + omphacite + Na‐amphibole + lawsonite + coesite + rutile, whose conditions were estimated at 590 < T < 605 °C and P > 3.2 GPa. The prograde path was characterized by a gradual decrease in the thermal gradient from ～9–10 to ～5–6 °C km?1. This variation is interpreted as the evidence of an increase in the rate of subduction of the Piemonte–Ligurian oceanic slab in the Eocene. Accretion of the Piemontese oceanic rocks to the Alpine orogen and thermal relaxation were probably related to the arrival of more buoyant continental crust at the subduction zone. Subsequent deformation of the orogenic wedge is responsible for the present position of the LCU, sandwiched between two tectonic slices of meta‐ophiolites, named the Lower and Upper Units, which experienced peak pressures of 2.7–2.8 and <2.4 GPa respectively.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号