共查询到20条相似文献，搜索用时 703 毫秒
1.
Characterizing a fractured aquifer in Mexico using geological attributes related to open-pit groundwater 总被引：1，自引：0，他引：1
A multivariable analysis of the Rock Quality Designation (RQD) and its relation with the hydraulic conductivity of 17 dewatering wells in an open-pit mine (central Mexico) is presented as a tool for groundwater exploration in fractured aquifers. A solid model was constructed with the RQD data using three sizes for each grid cell and four interpolation methods. The inverse-distance method with a small grid gives the best results. The resulting RQD solid model was used to locate 22 pilot holes, on which an air-lift test was performed as a qualitative assessment of their usefulness. The results showed a lower water production (1.8 l/s) in shale that has low alteration, whereas in highly altered shale, breccias, and intrusive rock, the flow rate was 3.9 l/s. This implies an important relationship between the pilot-hole performance, the lithology, and the rock alteration, but it was also found that some fractures or faults, which cannot be detected clearly by the RQD, play an important role in the hydrodynamics of the aquifer. In conclusion, it is necessary to consider all available factors that can help to identify the hydrodynamic behavior of the aquifer because using only RQD data can lead to errors in prospecting for groundwater. 相似文献
2.
Engineering classification of rock masses for the design of tunnel support 总被引：63，自引：10，他引：63
SummaryEngineering Classification of Rock Masses for the Design of Tunnel Support An analysis of some 200 tunnel case records has revealed a useful correlation between the amount and type of permanent support and the rock mass qualityQ, with respect to tunnel stability. The numerical value ofQ ranges from 0.001 (for exceptionally poor quality squeezing-ground) up to 1000 (for exceptionally good quality rock which is practically unjointed). The rock mass qualityQ is a function of six parameters, each of which has a rating of importance, which can be estimated from surface mapping and can be updated during subsequent excavation. The six parameters are as follows; theRQD index, the number of joint sets, the roughness of the weakest joints, the degree of alteration or filling along the weakest joints, and two further parameters which account for the rock load and water inflow. In combination these parameters represent the rock block-size, the interblock shear strength, and the active stress. The proposed classification is illustrated by means of field examples and selected case records.Detailed analysis of the rock mass quality and corresponding support practice has shown that suitable permanent support can be estimated for the whole spectrum of rock qualities. This estimate is based on the rock mass quality Q, the support pressure, and the dimensions and purpose of the excavation. The support pressure appears to be a function ofQ, the joint roughness, and the number of joint sets. The latter two determine the dilatency and the degree of freedom of the rock mass.Detailed recommendations for support measures include various combinations of shotcrete, bolting, and cast concrete arches together with the appropriate bolt spacings and lengths, and the requisite thickness of shotcrete or concrete. The boundary between self supporting tunnels and those requiring some form of permanent support can be determined from the rock mass qualityQ.
With 8 Figures 相似文献
3.
B. Stimpson 《Geotechnical and Geological Engineering》1989,7(2):147-162
Summary The selection of rock bolting lengths and spacings for a mine roof or back is relatively straightforward when wedges of rock bound by discrete discontinuities require support, or when the immediate roof can be anchored into a recognizably stable layer or rock mass. When neither of these situations is present the choice of bolt lengths and spacings is more difficult.In this paper a simplified conceptual model is presented which invokes the concept of an ellipticallyshaped zone of loosening above the opening, all, or a portion of which, may require support. The analysis includes the influence of opening span, height,in situ stress state, and rock mass quality as measured by the CSIR Rock Mass Classification.Validation of the model was sought by analysing a number of case histories in the literature. 相似文献
4.
Preventing roof collapse in underground cavities is a challenge to geotechnical engineering. In this study, three independent methods have been used to evaluate the roof collapse of underground rectangular cavities for a range of geometries and rock properties. The rock mass strength has been described by the Hoek–Brown failure criterion. The results of the analysis allow for prediction of roof collapse and to determine whether the failure surface that develops in the rock mass remains localised or extends through the full depth of cover. This is of significance if there are overlying cavities and when estimating surface subsidence. 相似文献
5.
根据大断面厚顶煤巷道顶板的破坏特性,考虑了顶板围岩应力水平与支护荷载的影响,利用Hoek-Brown强度准则及其相关联的流动法则,构造出厚顶煤巷道顶板的冒落破坏机构。基于塑性力学中的上限分析方法,结合变分原理,推导得到了大跨度厚顶煤巷道顶板的冒落破坏机制,并以赵楼煤矿某巷道现场实践为例,分析了不同计算参数对顶板冒落破坏机制的影响。计算研究表明：随着岩体经验参数A、抗拉强度、抗压强度及支护荷载的增加,冒落体尺寸随之增大,而当岩体经验参数B、围岩应力及岩体重度增加时,冒落体尺寸则随之减小;冒落体尺寸代表了巷道顶板安全性能的大小,其尺寸越大,表明使巷道顶板发生冒落破坏所需外力功越多,顶板安全性能也越高;岩体经验参数B、围岩应力水平与支护荷载对顶板围岩破裂机制影响较为显著,参数B决定了冒落体的破裂形状,随着参数B的增加,冒落破裂迹线的曲率不断减小;增大支护阻力是提高顶板稳定性的有效途径,其研究结果可为大断面厚顶煤巷道支护设计提供一定的理论依据。 相似文献
6.
V. Palchik 《Geotechnical and Geological Engineering》2000,18(1):39-51
Composite statistical analysis of the lithological composition of the rock mass above underground workings in coal seams and experimental work (laboratory mechanical tests and boring for the determination of hollows) in Donetsk city (Ukraine) have been used to develop a method for predicting the presence of hollows. The empirical criteria K1–K2>0 and K32.5 which relate to the physical characteristics of the overlying strata were found to predict the existence of such hollows in abandoned underground workings at shallow depth. The values of K1–K2 and K3 depend on the thicknesses of the different rock layers and the uniaxial compressive strength of the immediate roof over underground openings. The different layers e.g. sandstones, argillites, aleurolites and alluvium in the rock mass are shown to influence the existence of hollows in abandoned workings. Large thicknesses of sandstones in the rock mass or relatively high uniaxial compressive strength rock in the immediate roof contribute to the existence of hollows in abandoned workings. On the other hand, sandstones of small thickness, weak alluvium, argillites and aleurolites only give additional weight on immediate roof of the opening and allow collapse of the rock mass. The method of prediction for hollows was developed from the back-analysis of data from 41 boreholes which were drilled from the ground surface above underground openings. 相似文献
7.
煤矿突水溃砂灾害的发生与煤层上履含水层性质、岩性特征及破坏程度等诸多因素有关。通过研究己15煤层顶板基岩与第四系底部的含、隔水性能及顶板覆岩岩性组合特征,计算出一次全部开采3．6m煤层时,其导水裂缝带最小发育高度为38．46m,最大为47．95m,确定了采煤活动导致的上覆顶板含水层发生水力联系的范围,认为己15—13030工作面煤层开采时发生顶板突水的可能性不大;计算一次全部开采3．6m煤层时,防砂安全垂高最大为23．5m．防塌安全煤岩柱最大垂高为12．5m,结合煤层顶板基岩及第四系底部岩层的水文地质特征,认为工作面回采时顶板溃砂的可能性也不大。强调在生产过程中,要加强顶板涌水的观测,同时增加现有排水系统的排水能力,从而为工作面安全回采提供支持。 相似文献
8.
Roger J. Missavage Yoginder P. Chugh Thomas Roscetti 《Geotechnical and Geological Engineering》1986,4(1):39-46
Summary A mathematical model has been developed utilizing the relative flexural strength of the strata overlying a coal seam to predict the vulnerability of shallow room and pillar mined areas to subsidence. The model assumes the failure of the immediate roof as the precursor of a subsidence event in shallow room and pillar mines. After the roof fails, either a sink hole subsidence event develops if the unconsolidated material is thin and dry; or a subsidence trough forms if the unconsolidated material is thick and wet. The model relates the Missavage number (Mn), which is dependent only on the stratigraphy and rock strength, to the extraction number, which is dependent only on the extraction ratio and maximum span of the opening. A high correlation coefficient (r=0.78) betweenMn and the extraction number for 27 subsidence events in a southern Illinois mine showed potential for using this model to delineate areas more vulnerable to subsidence. The developed and validated model was then subjected to a blind test on a 12.9 square kilometer area of an Illinois Coal Basin mine. The model successfully predicted 10 out of 12 subsidence events in the blind half of the study area and two of three additional subsidence events in the known half of the study area. 相似文献
9.
Jiahua Zhang Lianyang Zhang Weijun Wang Daobing Zhang Biao Zhang 《国际地质力学数值与分析法杂志》2020,44(11):1601-1616
This paper investigates tunnel face stability in soft rock masses via coupled limit and reliability analyses. Specifically, a 3D face collapse mechanism was first constructed. Then the Hoek–Brown failure criterion was introduced into the limit analysis via the tangential technique. Taking the variability of rock mass parameters and loads into consideration, a reliability model was established. The collapse pressure and failure range of tunnel faces were determined. In addition, the required factor of safety (FS) and supporting pressure under three safety levels were obtained, and the corresponding safety level graphs for support design were presented. Comparison of the obtained results with previous work demonstrates the rationality of the 3D collapse mechanism and the validity of the results. A decrease in the geological strength index, Hoek–Brown parameter mi, and uniaxial compressive strength or an increase in the disturbance factor results in a nonlinear increase of the collapse pressure and an enlargement of the failure zone. Such changes also lead to a nonlinear increase of the required support pressure under a certain safety level. By contrast, the FS does not exhibit any obvious change when these parameters vary. Therefore, when a rock mass is of poor quality or heavily disturbed, the advance support should be enlarged from upper front to right above the tunnel face. Moreover, as the safety level increases, both the required FS and supporting pressure of the tunnel face increase nonlinearly at a higher rate. 相似文献
10.
11.
Summary Based on field instrumentation in eight different coal mines representing varying depths and strata conditions, a relation for obtaining the critical convergence value has been established. In development heading for bord and pillar workings this relation can be used successfully to control the premature collapse of the roof. An empirical relation for rock load has been established. This can be utilized for optimum design of support system. The roofs have been categorized as stable, short-term stable and unstable. Proper attention should be provided for an unstable roof and the support design is to be changed before the convergence reaches the critical value. 相似文献
12.
针对断层区煤巷顶板破断问题,分别建立了正断层和逆断层构造区的顶板弹性深梁力学模型,研究了顶板应力分布规律,并以Mohr-Coulomb破坏准则为判据,分析了不同顶板压力、支护强度、跨高比等因素下的顶板破断机制。理论分析表明,顶板深梁最大有效剪应力随跨高比增大而增大;其随跨高比不同而呈现出3种不同破断模式;穿越断层的巷道在断层区域应尽早使用强力支护系统,提高支护强度;穿越正断层的巷道在断层面附近应当提高护表效果。根据理论分析结论提出,在煤巷断层区使用让压型锚索箱梁支护系统,可对顶板围岩进行及时强力支护,实现“先控后让再抗”,既能有效发挥支护系统作用,又能充分发挥围岩自承能力。上述支护对策应用于巨野矿区断层区煤巷支护方案设计中,有效防止了顶板事故的发生,验证了理论分析的正确性。 相似文献
13.
以埋深为6～13 m的某浅埋人防隧洞为研究对象,应用快速拉格朗日有限差分程序（FLAC）对不同跨距、不同岩性的隧洞顶板在不同荷载作用下的破坏规律及破坏机制进行数值模拟研究,确定了隧洞围岩破坏域,并对拱顶敏感块体进行跟踪分析。研究结果表明：隧洞跨距为2 m且顶板岩层为泥岩时,隧洞顶板有一定的承载能力,当上部荷载达到0.7 MPa时隧洞才破坏;隧洞跨距为3 m且顶板岩层为泥岩时,当上部荷载达到0.33 MPa时,隧洞就已经破坏;隧洞顶板为卵石层时,即使上部不施加荷载,在自重应力的作用下,隧洞亦破坏。该研究对类似的浅埋地下工程围岩稳定性分析具有实际意义。 相似文献
14.
以忻州窑矿8939工作面为工程背景,运用弹性板理论分析坚硬顶板破断期间释放的弹性能量值,并利用FLAC3D数值模拟划分工作面回采期间的高应力区域,同时根据分形理论分析微震事件的时间分布、空间分布与冲击地压的内部关联。研究结果表明:坚硬顶板断裂前,悬露顶板由于旋转下沉不断对工作面前方煤体缓慢加载,由于过程缓慢,应力与能量不断向煤岩体深部转移,不易发生冲击地压。当顶板断裂时,会瞬间释放大量的弯曲应变能,对工作面周围煤体产生强大的脉冲作用,若脉冲能量超过冲击地压的临界值,则发生冲击地压的可能性较大。且冲击地压发生之前,煤岩体处于非稳定状态,会与外界积极交换能量,此时微震事件处于活跃期,当微震能量超过一定数值或微震事件的分维值低于某临界值时,易发生冲击地压。 相似文献
15.
一种基于块体化程度理论的裂隙岩体巷道顶板稳定性分级方法研究 总被引：1，自引：0，他引：1
岩体完整性是进行巷道顶板稳定性分级的一个重要指标,当前分级方法均是从一维角度对岩体结构进行描述,不能全面刻画出三维空间上顶板围岩的完整性。针对这一缺陷,引入裂隙岩体块体化程度理论,以块体化程度代替常规标准中表征岩体完整性的岩体质量RQD值和节理间距两项子指标,开展裂隙岩体巷道顶板稳定性分级研究,创新形成了一种适用于裂隙岩体顶板稳定性分级的BT分级方法。以块体百分比和块体体积曲线为基本依据,构建出裂隙岩体巷道顶板围岩块体化程度的解算流程;运用AHP法对稳定性影响因素权重进行了排序,制定出稳定性分级方法与标准。以铜坑矿92号矿体裂隙岩体试验区巷道顶板结构面调查数据和岩石力学参数为基础,运用传统分级方法RMR法和BT法分别对各试验区巷道顶板稳定性进行评价,对两种分级结果进行比较分析,结果表明：与传统的RMR法相比,BT法在稳定性描述、分级准确性和安全管理指导作用等方面更为优越,更能够客观真实地反映出裂隙岩体巷道顶板稳定性。研究成果可为复杂裂隙岩体条件下的巷道顶板安全分级与管理提供更为可靠的科学依据。 相似文献
16.
Discontinuous Modelling of Stratum Cave-in in a Longwall Coal Mine in the Arctic Area 总被引：1，自引：1，他引：0
Mahdi Shabanimashcool Lanru Jing Charlie C. Li 《Geotechnical and Geological Engineering》2014,32(5):1239-1252
This paper presents a discontinuous numerical approach for studying roof cave-in mechanisms and obtaining the required support capacity of longwall shields in a case study site, the Svea Nord coal mine in Svalbard. The block size in the roof strata and the mechanical parameters of the discontinuities for the numerical model were obtained through back-calculations. The back-calculations were conducted with a statistical method of design of experiment. Numerical simulations revealed that voussoir jointed beams are formed before the first cave-in occurs. The maximum deflection of a roof stratum in the study site prior to the first cave-in is about 70 % of the stratum thickness. The maximum span of the roof strata prior to the first cave-in depends upon the in situ horizontal stress state. The roof beams have a large stable span when they are subjected to high horizontal stress; but horizontal stress would increase the possibility of rock crushing in deflected roof beams. The simulations and field measurements show no periodic weighting on the longwall shields in the study site. Stiff and strong roof beams would result in large first and periodic cave-in distances. As a consequence of having large cave-in distances, the longwall shields must have high load capacity, which can be calculated by the presented numerical approach. 相似文献
17.
S. Y. Wang K. C. Lam S. K. Au C. A. Tang W. C. Zhu T. H. Yang 《Rock Mechanics and Rock Engineering》2006,39(5):445-467
Summary. Based on cusp-type catastrophe theory, a sample rock–rock model for studying the pillar rockburst mechanism is presented in
this paper. It is shown that the stiffness ratio, K, of the roof and floor to the pillar plays an important role in the outbreak of instability. Additionally, simple formulae
for the deformation jump and the energy release are derived. Based on the assumption that there exists a proportional relationship
between the number of microseismic events and microfractured elements, the theoretical microseismic event rate produced by
the double rock sample, loaded in series under uniaxial compression, is obtained. Using a newly developed numerical code,
RFPA2D, the progressive failure process and associated microseismic behavior of the twin rock samples are simulated, which shows
that the spatial distribution of microseismic events develops progressively from disorder at the initial loading stage to
order prior to the main shock. The numerically simulated results also confirm that a soft roof and floor promote an unstable
failure or collapse of pillars, while a stiff roof and floor can lead to a stable failure of pillars. Additionally, the simulated
results reproduce the deformation jump and the energy release that occur during a pillar rockburst. It is demonstrated that
the proposed model properly simulates the pillar failure process. 相似文献
18.
19.
溶洞顶板以及溶洞本身的变形是评价含隐伏溶洞岩溶地基稳定性最为直观的技术指标,在岩土自重和桩基的外附荷载作用下,确定桥基隐伏溶洞顶板安全厚度为8.0 m能够满足稳定性要求,突破了设计规范中对溶洞厚跨比必须大于0.8的要求。利用有限元计算,预测了桥基下溶洞及顶板的变形规律,采用钻孔多点位移计实现了在施工荷载施加过程中对溶洞及顶板岩体的变形的实时监测,有效验证了数值计算结果的合理性。监测结果表明：溶洞顶板不同岩层及溶洞本身的变形在荷载施加初期发展较快,相同施工荷载作用下洞体本身的应变最大,而顶板表层的应变又高于洞体上部岩层应变。 相似文献
20.
为了研究岩溶山区地下采矿活动对上覆岩层及山体的变形影响,依托贵州纳雍普洒“8.28”特大崩滑案例,在现场地质调查的基础上,分析了纳雍普洒“8.28”崩塌体特征和山体变形发展过程,采用UDEC离散元数值方法研究了地下采动作用诱发强烈岩溶山体崩滑失稳过程及变形特征。结果表明:山体上部灰岩溶蚀强烈,形成众多裂隙和岩溶管道,在地下采动作用下经历了较长的变形发展过程;地下采动影响下,山体上覆岩层向采空区方向变形,并随着顶板岩层冒落,岩层变形显著增大;上覆岩层深大裂隙对山体变形有重要影响,上部岩层沿着裂隙向下形成沉降带,同时裂隙也得以扩展;崩塌区前缘岩体由于开挖卸荷,向坡外发生挤出变形,前缘阻滑力降低;随着采空区不断扩大,山体稳定性不断降低,最终山体整体溃屈,发生破坏。普洒崩滑模式为“山体后缘拉裂沉陷—裂隙扩展贯通—整体溃屈”。本研究为开展西南地区地下采动对岩溶坡体稳定性影响评价提供借鉴。 相似文献