共查询到20条相似文献，搜索用时 78 毫秒
1.
安徽铜陵冬瓜山矿床矿石硫化物环带及地质意义 总被引：1，自引：1，他引：0
安徽冬瓜山矿床是铜陵矿集区内一个重要的大型铜(金)矿床,颇受关注,成因认识分歧较大。矿床内块状硫化物矿石中普遍发育以黄铁矿为核部、黄铜矿为中间带、磁黄铁矿为边部带的硫化物环带。这些环带核部黄铁矿多呈自形-半自形晶,黄铜矿呈他形晶围绕黄铁矿沉淀,磁黄铁矿呈他形分布在黄铜矿外围,内带常被外带硫化物溶蚀交代。硫同位素分析结果显示,环带中硫化物矿物的硫同位素(δ34S=1.6‰~5.1‰)具有岩浆硫源特征,同时从核部黄铁矿到中间带黄铜矿,再到边部磁黄铁矿δ34S值逐渐降低。以上特征表明环带从内到外硫化物之间并非平衡共生关系,而是黄铁矿、黄铜矿和磁黄铁矿先后依次晶出。硫化物环带核部粗粒黄铁矿(粒径大于1.5cm)的Co、Ni含量分别为292×10-6~1504×10-6和32.7×10-6~39.9×10-6,Co/Ni=7.32~46.0(平均26.7),与海底火山喷流沉积型黄铁矿的Co、Ni特征基本一致。核部黄铁矿由颗粒中心向边缘,Fe/S原子比值、Mo和Co含量先逐渐升高,再逐渐降低,而Cu、Zn等成矿元素主要富集于颗粒边缘,并向边缘有逐渐升高趋势。与此同时,细粒黄铁矿(粒径小于0.5cm)中的Cu、Zn等元素的含量明显高于粗粒黄铁矿。环带中三种硫化物矿物的REE配分曲线和微量元素蛛网图极为相似,相对富集LREE、Rb、Th等元素,而亏损Nb、Ta、Zr、Hf、Sr、Ba和HREE等元素,由环带核部到边部δEu逐渐减小,与矿区石英二长闪长(玢)岩表现出较高的相似性。以上特征综合分析表明,冬瓜山铜(金)矿床中硫化物环带经历了以下形成过程:石炭纪海底喷流沉积作用在矿区形成沉积黄铁矿,到燕山期,在区内强烈的构造-岩浆活动作用下,致使早期沉积的黄铁矿首先发生变质重结晶作用,形成粒状黄铁矿,随后岩浆热液对其进行叠加改造,并在岩浆热液作用下相继围绕粒状黄铁矿增生,依次沉淀出热液型黄铁矿、黄铜矿和磁黄铁矿,最终形成硫化物环带。这一认识,结合硫化物环带中元素及硫同位素特征进一步表明冬瓜山铜(金)矿床的形成先后经历了古生代海底喷流沉积成矿作用和燕山期岩浆热液成矿作用,矿床中的成矿物质(特别是Cu、Zn等成矿元素)主要来源于燕山期岩浆热液,但石炭系海底喷流沉积作用也提供了部分物质(例如,Fe、S、Mo、Co和Ni等)。此外,环带中微量元素的变化特征表明,随着硫化物环带的形成,成矿热液系统的温度、硫逸度和氧逸度逐渐降低和(或)p H值升高。 相似文献
2.
桦树沟铜矿床位于北祁连加里东造山带西段。铜矿体赋存于镜铁山BIF型铁矿床桦树沟矿区FeⅤ矿体下盘,矿体受断裂构造控制,矿化岩石主要为铁碧玉岩、石英绢云母千枚岩和碳质千枚岩,围岩蚀变可见硅化、碳酸盐化、绢云母化和绿泥石化。文章对块状铜矿石(富铜矿体)和脉状铜矿石(千枚岩型铜矿体)进行了野外地质特征、矿物学和硫同位素对比研究。富铜矿体与地层产状基本一致,块状矿石矿物组合为黄铜矿+少量黄铁矿+石英+碳酸盐矿物+重晶石,黄铜矿低S、Cu,高Fe。脉状矿石主要表现为石英-碳酸盐-硫化物脉沿千枚理或裂隙产出,矿石矿物组合为黄铜矿+黄铁矿+黝铜矿+镜铁矿+石英+碳酸盐矿物+绢云母+绿泥石,黄铜矿低S高Fe。块状铜矿石中黄铜矿的δ34S变化范围为15.6‰~17.4‰,暗示硫主要来自同期海水。脉状矿石中硫化物的δ34S值低于块状矿石中黄铜矿的δ34S值,黄铜矿、黄铁矿的δ34S值变化范围分别为13.2‰~16.2‰和9.3‰~13.4‰,暗示硫可能主要来自受还原的硫化物和硫酸盐矿物。以上研究表明块状铜矿石和脉状铜矿石可能为不同热事件的产物,结合前人研究成果,笔者认为桦树沟铜矿床为海底喷流沉积叠加后期热液改造成因。绿泥石温度计指示后期热液成矿温度为222℃左右。 相似文献
3.
江苏观山高硫型铜铅金矿床稳定同位素地球化学和成因意义 总被引：1，自引：0，他引：1
江苏观山铜铅金矿是典型的高硫型浅成低温热液矿床。本文通过对观山铜铅金矿床氢、氧、碳、硫同位素组成的研究,探讨成矿溶液中水、碳、硫的来源以及成矿溶液的演化。同位素测定显示石英流体包裹体水的δD=-90‰～-70‰,δ18O水=-8.9‰～-1.1‰;热液方解石流体包裹体水的δD=-90‰～-81‰,δ18O水=0.1‰～2.3‰。氢氧同位素组成说明成矿流体主要为与围岩进行过水岩反应的循环大气降水,不排除有少量岩浆水的加入。黄铁矿与黄铜矿矿石的δ34SV-CDT=5.8‰～9.9‰,平均值为7.6‰,表明该矿成矿过程中的S很可能是沉积岩来源的硫与岩浆岩来源硫的混合。矿床中可见较多的重晶石等硫酸盐矿物,这种高价态硫的矿物的存在显示其成矿溶液具有富集34S的特征,加上成矿过程中流体的沸腾导致H2S等气体大量逸出和残余岩浆流体富集34S,使得沉淀的黄铁矿、黄铜矿等硫化物同样具有富集34S的特征;热液方解石碳同位素δ13C方解石=-4.1‰～6.1‰,平均为δ13C方解石=1.3‰,显示其中的C主要来源于流体对流循环过程中对基底岩石中碳酸盐地层的溶解。 相似文献
4.
铜厂铜-铁矿床在成矿时代、成矿物质来源及矿床成因等方面存在较大争议,限制了其成矿模式的建立以及进一步的找矿实践. 利用黄铜矿Re-Os同位素对该矿床进行定年,并利用LA-MC-ICP-MS技术对黄铜矿、黄铁矿及磁黄铁矿等硫化物开展原位硫同位素研究. 分析结果显示,5件黄铜矿Re-Os同位素等时线年龄为484±34 Ma（MSWD=8.7）,表明铜厂铜-铁矿床形成于早古生代加里东期. 铜厂铜-铁矿床上部铜矿床中黄铜矿（+9.75‰~+13.1‰）和黄铁矿（+9.22‰~+13.9‰）的δ34S值略高于下部铁矿床中黄铜矿（+8.66‰~+10.9‰）、黄铁矿（+8.85‰~+11.0‰）和磁黄铁矿（+7.93‰~+9.28‰）. 计算得到早期成矿热液的δ34S∑S值约为+10.6‰,晚期成矿热液的δ34S∑S值约为+12.3‰,说明矿床硫是地幔硫混染海水硫形成的,热化学还原在海水硫酸盐还原过程中起到关键作用. 铜厂铜-铁矿床的形成可分为两期:新元古代晋宁期,Rodinia超大陆裂解导致勉略宁地区发生海底火山喷发形成富含Fe、Cu的初始矿源层;早古生代加里东期,大陆边缘持续的裂解和裂陷形成勉略海槽并导致强烈的岩浆活动,富含挥发分及硫的岩浆热液混合海水硫,并从细碧岩中萃取Fe、Cu等成矿物质,早期成矿热液在铜厂地区深部形成铁矿床,随着磁铁矿和硫化物的沉淀,成矿热液演化到晚期阶段并沿断裂构造带向上运移,在铜厂地区浅部形成铜矿床. 相似文献
5.
大水金矿氧化带下部,发育大量的微细粒浸染状、细脉状黄铁矿和黄铜矿,并出现砷黝铜矿.地表氧化矿中的赤铁矿,是黄铁矿等原生硫化物氧化所致;在矿石矿物成分上,黄铁矿、黄铜矿和砷黝铜矿的Au含量普遍较高.黄铁矿中的Co/Ni比值多大于2,与岩浆成因黄铁矿相吻合.流体包裹体均一温度为105℃～400℃.δ34S=-1.8‰～ 4.1‰,δ13C=-2.7‰～ 4.3‰,δ18O=6.63‰～19.42‰,δD=-101‰～-75‰.成矿流体主要来源于岩浆热液,碳、硫和成矿元素主要来源于赋矿闪长岩体,为富硫化物的闪长岩型金矿床.砷黝铜矿对找矿与勘探有指示作用. 相似文献
6.
新疆西天山查汗萨拉金矿地质、金赋存状态及同位素地球化学研究 总被引：2，自引：1，他引：1
查汗萨拉金矿是近年在新疆西天山新发现的一处金矿床,处于依连哈比尔尕构造带西端.矿体旱不规则脉状产于细品闪长岩构造破碎蚀变带及其接触带附近的上石炭统奇尔古斯套组蚀变围岩中,围岩蚀变较弱.矿石中硫化物主要为黄铁矿,并含少量磁黄铁矿、黄铜矿、方铅矿等.硫化物矿物呈自形粗晶或半自形结构,斑杂状分布在构造蚀变岩石中.金矿物以自然金和银金矿为主,还发现有硫(碲)银金矿和金铀化物等独特矿化线索,金矿物多赋存在黄铁矿中,以包体金、裂隙金和少量粒间金形式存在.金矿物形态以粒状和长角状为主,多为细、微细粒金(粒度<10 μm).矿石中矿物流体包裹体均一温度为220～340℃.热液脉三石矿物石英流体包裹体的δD为-92‰～-74‰,δ18Ov-SMOW为11.8‰～12.6‰,成矿流体显尔岩浆热液和变质建造水混合的特征.热液方解石脉的占δ13Cv-PDB为-8.92‰～-8.06‰,δ18Ov-SMOW为13.45‰～17.18‰,反映成矿流体中CO2主体米源于岩浆.硫化物206pb/204Pb为18.036～18.173,207pb/204pb为15.536～15.612,208pb/204pb为37.940～38.097,成矿金属具岩浆来源特征.矿石中硫化物δ34Sv-CDT为-9.8‰～-7.3‰,显示其可能与地层有关.查汗萨拉金矿为构造蚀变岩型中温岩浆热液矿床.小同于本区阿希金矿,是西天山金矿勘查中值得关注的新类型. 相似文献
7.
马元铅锌矿床是近年在扬子陆块北缘铅锌找矿的新突破.矿床主要形成于边缘基底隆起翼部震旦系灯影组中,矿体呈层状、似层状产于角砾化白云岩层间构造带中,围岩蚀变很弱.矿石中硫化物以闪锌矿、方铅矿为主,矿物成分简单,中粗粒晶质结构,充填于白云岩角砾间.矿石中矿物流体包裹体记录的成矿流体温度为100～320℃,密度为0.850～1.068 g/cm3,估算成矿流体压力为24.9～31.7 Mpa,相应成矿深度900～1 198 m.矿石中硫化物的δ34SV-CDT为12.94‰～19.4‰,且δ34S黄铁矿＞δ34S闪锌矿＞δ34S方铅矿;硫酸盐矿物的δ34S为32.2‰～33.48‰,H2S来自海相硫酸盐的还原.矿石硫化物206Pb/204Pb为17.62～18.02,207Pb/204Pb为15.49～15.63,208Pb/204Pb为37.57～38.35,成矿金属来源于震旦纪一寒武纪地层.矿石中热液脉石矿物的δ13 CV-PDB为-3.2‰～-1.2‰,δ18OV-SMOW为19.4‰～21.4‰,成矿流体中CO2为震旦系碳酸盐岩的溶解成因.马元铅锌矿床成矿流体可能为起源于盖层沉积的中低温盆地卤水,伴随碑坝穹隆构造过程,成矿流体沿灯影组白云岩层间(滑脱或溶塌)构造从盖层沉积中心向隆起边部运动并发生热液充填成矿,在成因上为MVT铅锌矿床. 相似文献
8.
采用硫同位素方法,对新疆巴音铜矿床硫化物和硫酸盐矿物进行硫同位素测定,获得硫化物和硫酸盐的δ34S值在-17.5‰～ 10.0‰,硫同位素富集顺序为δ34S重晶石＞δ34S黄铁矿＞δ34S辉铜矿＞δ34S黄铜矿.对矿床矿物包裹体测定及矿物稳定场进行物理化学计算,获得成矿温度约250℃, logfO2为-34.37～-38. 42;logfs2为-8.59～-14.0;logfCO2为-2.3;pH值为3～6.对矿床δ34SΣS计算,获得δ34SΣS为 10‰,指示出矿石硫源来自岩浆与海水硫酸盐混合. 相似文献
9.
笔者对大宝山多金属矿床矿石和脉石矿物进行铅、硫、氢和氧同位素组成测定,获得硫化物的206Pb/204Pb值为17.930～18.785;207Pb/204Pb值为15.491～15.772;208Pb/204Pb值为37.990～40.990,并组成良好的线性关系。泥盆系地层中黄铁矿的δ34S为-22.5‰～+17.9‰,矿床硫化物的δ34S为-2.4‰～+4.6‰。黄铁矿、闪锌矿和方铅矿共生矿物对,具有δ34Spy>δ34Ssp>δ34Sgn,用磁黄铁矿的硫同位素组成估算出δ34S∑S为2‰±3‰。硫化物包裹体的氢同位素在-101‰～-123‰之间,与硫化物共生石英的氧同位素为+9.3‰～+17.9‰,换算成水的氧同位素为+0.3‰～+3.9‰,表明成矿热液来源较为复杂。 相似文献
10.
哈萨克斯坦萨亚克大型铜矿田中, 矽卡岩型矿床的矿体赋存于石炭系灰岩与花岗岩类的接触带上, 矿体及其周围发育大量矽卡岩。矽卡岩矿物主要由石榴子石、辉石、绿帘石、绿泥石等组成, 矿石矿物主要发育黄铜矿、斑铜矿、黄铁矿、磁黄铁矿、辉钴矿等。萨亚克矽卡岩型矿床成矿作用分为5个阶段: 透辉石-石榴子石矽卡岩阶段、石榴子石矽卡岩阶段、绿帘石-磁铁矿阶段、石英-硫化物阶段和碳酸盐阶段。电子探针分析结果表明, 矿区矽卡岩属典型的钙质矽卡岩。 其中石榴子石发育3种类型, 均属钙铝-钙铁榴石固溶体系列, 自早期透辉石-石榴子石矽卡岩阶段至晚期石榴子石矽卡岩阶段, 由钙铁榴石向钙铝-钙铁榴石转变, 并且钙铁-钙铝榴石与矿化关系最为密切。其中具环带结构的石榴子石中钙铁与钙铝含量随环带呈韵律性变化, 表明生长过程中成分具震荡性变化, 形成于不完全封闭的平衡条件, 指示流体的多期次多阶段性; 辉石以透辉石为主; 绿帘石属绿帘石族中绿帘石范畴; 磁铁矿TFeO含量高, 与其他氧化物成分呈负相关关系。石英硫化物阶段早期发育黄铜矿-黄铁矿-磁黄铁矿-白铁矿、黄铜矿-辉钴矿矿物组合; 晚期为主要矿化阶段, 发育大量致密块状黄铜矿。黄铜矿显示贫硫富铜、铁特征; 黄铁矿为亏硫型; 磁黄铁矿属贫钴富镍型。矽卡岩矿物共生组合及石榴子石成分演化等矿物学特征显示, 成矿过程中随着温度及氧逸度的降低, 成矿热液由弱碱性向酸性演化, 伴随热液在接触带的中和作用, 以黄铜矿为主的金属硫化物富集沉淀。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
13.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
14.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
15.
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
19.
Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA 总被引：1，自引：0，他引：1
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources. 相似文献
20.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献