共查询到20条相似文献，搜索用时 31 毫秒
1.
为了探讨粒径对黄砂岩微观-宏观裂纹演化机制的影响,系统地开展了不同粒径黄砂岩单轴压缩声发射试验。基于声发射监测技术以及震源机制反演方法,对岩石变形破坏过程中微裂纹演化机制进行了研究,同时利用电镜扫描技术与几何分形理论,对破坏后的砂岩表面裂隙宏观形态及试件断口的微观形貌特征进行了分析。试验结果表明：粒径的大小、胶结物类型的不同均可影响岩石强度,通过室内试验得出随着黄砂岩粒径的逐渐增大,其峰值应力呈逐渐下降的变化趋势;对比不同粒径黄砂岩试件变形破坏过程中的声发射改进 b 值（ bI 值）与平均声发射能率,所有试件峰值破坏前平均声发射能率均存在“激增”与“激降”现象,且声发射 bI 值在砂岩试件达到峰值破坏时下降到最小值,该现象可以作为岩石的失稳破坏前兆特征;随着构岩矿物颗粒粒径的增大,岩石内部微裂纹的破坏模式由张拉型为主导向剪切型为主导进行转变;破坏后岩样表面宏观裂隙的分形维数随着岩石粒径的增加呈现下降的变化趋势,即粒径大小对岩石表面宏观裂隙演化过程具有一定控制作用。 相似文献
2.
An Experimental Study of the Fracture Coalescence Behaviour of Brittle Sandstone Specimens Containing Three Fissures 总被引：9，自引：6，他引：3
S. Q. Yang D. S. Yang H. W. Jing Y. H. Li S. Y. Wang 《Rock Mechanics and Rock Engineering》2012,45(4):563-582
To analyse the fracture coalescence behaviour of rock, rectangular prismatic sandstone specimens (80?×?160?×?30?mm in size) containing three fissures were tested under uniaxial compression. The strength and deformation behaviours of the specimens are first analysed by investigating the effects of the ligament angle β2 on the peak strength, peak strain and crack initiation stress of the specimens. To confirm the sequence of crack coalescence, a photographic monitoring technique is used throughout the entire period of deformation. Based on the results, the relationship between the real-time crack coalescence process and the axial stress–strain curve of brittle sandstone specimens is also developed, and this relationship can be used to evaluate the macroscopic deformation characteristics of pre-cracked rock. The equivalent strain evolution fields of the specimen, with α?=?β1?=?45° and β2?=?90°, are obtained using the digital image correlation technique and show good agreement with the experimental results of pre-cracked brittle sandstone. These experimental results are expected to improve the understanding of fracture mechanisms and be used in rock engineering with intermittent structures, such as deep underground excavated tunnels. 相似文献
3.
利用自主研发的岩石松弛-扰动试验装置,测试了岩石加载、松弛、动态扰动和扰动后4个阶段的轴向应力、轴向应变和声发射响应,观察到了岩石试样在动态扰动后应变增加、应力降低的现象,砂岩试样的这种特征比花岗岩明显。初步分析认为,产生该现象的原因一方面由于松弛-扰动过程导致岩石内部出现不可逆的损伤,另一方面则是扰动去除后试样的残余变形。在初始压密和弹性阶段,砂岩试样的声发射撞击数少;在接近应变峰值阶段,撞击数骤增;在应力松弛阶段撞击数骤减;在动态扰动阶段,撞击数骤增。声发射是由于岩石损伤引起的,声发射数据反映了岩石的损伤是引起松弛试样在动态扰动后应变增加、应力降低的一个原因。另外,基于砂岩和花岗岩的准静态循环加、卸载试验,对砂岩、花岗岩在不同应变等级下的残余应变进行了定量化;砂岩的残余应变远高于花岗岩,这与砂岩试样在历经松弛-动态扰动后应变增加、应力降低较为明显的趋势相对应。同时,无论是松弛-动态扰动试验还是准静态循环加、卸载试验,岩石的残余变形都会随着卸荷初始应变的提高而增加。岩石的损伤与残余变形是密切相关的,两者的综合作用引起了动态扰动后岩石试样的应变增加、应力降低现象。 相似文献
4.
本文主要研究花岗岩和砂岩两种脆性岩石的详细声发射特征。通过对花岗岩和砂岩样品进行单轴压缩试验,并在试验过程中监测样品破裂全程的声发射信号。对试验结果的分析包含了力学特性分析和声发射特性分析,声发射特性分析使用了多种参数:累积声发射计数、累积声发射能量、AF值、RA值、b值。研究主要获得了如下结果:（1）获取了岩石样品的变形参数与强度参数,并分析了其离散性;（2）岩石样品内部颗粒的胶结强度与结构的均匀性对累积声发射计数、累积声发射能量的影响;（3）需要通过进一步试验研究来确认采用AF和RA值来区分岩石类材料张拉和剪切裂纹模式的合理性及其阈值;（4）砂岩样品在接近破坏时,微裂缝活动仍然占据主导地位。文章对脆性岩石样品在单轴压缩条件下的力学特性和声发射特性进行了详尽细致的分析,发现了单轴压缩条件下脆性岩石的一些重要特性,为进一步的试验研究工作提供了基础。 相似文献
5.
煤岩两体模型变形破坏数值模拟 总被引：3，自引：0，他引：3
采用拉格朗日元法,在弹性岩石与弹性-应变软化煤体所构成的平面应变两体模型的上、下端面上不存在水平方向摩擦力条件下,模拟了模型的破坏过程、岩石高度对模型及煤体全程应力-应变曲线、煤体变形速率、煤体破坏模式及剪切应变增量分布的影响。结果表明,当模型的全程应力-应变曲线达到峰值时煤体内部的剪切带图案已经十分明显,在模型的应变硬化阶段,煤体中的应变局部化可视为模型失稳破坏的前兆,随岩石高度的增加,模型应力-应变曲线的软化段变得陡峭,这与单轴压缩条件下的解析解在定性上是一致的;煤体应力-应变曲线的软化段变得平缓,煤体消耗能量的能力增强;弹性阶段煤体的变形速率降低;煤体内部的剪切应变增量增加。煤体应力-应变曲线的软化段的斜率、弹性阶段煤体的变形速率、煤体内部的剪切应变增量及塑性耗散能都受岩石高度的影响,说明了岩石几何尺寸对煤体的影响(煤岩相互作用)是不容忽视的。 相似文献
6.
节理岩体的剪切贯通机制影响着边坡的稳定性。为揭示锁固段型非贯通节理岩体在不同连通率和法向应力下的破坏特征,在室内直剪试验中结合高速摄影与AE特征参数分析其剪切全过程及剪胀效应。结果表明:节理岩体直剪试验中,法向应力的增大及节理连通率的下降会致使峰值剪切应力及峰值剪切位移增大;节理连通率与法向应力对其破坏特征具显著影响,表现为节理连通率较高且法向应力较小时呈直接剪断的特性,节理连通率降低后呈拉剪复合破坏,出现剪胀现象,而法向应力的增大使得剪胀效应呈波动现象;AE特征与岩桥贯通过程一致,事件数峰值随节理连通率的降低及法向应力的增大而增大且位于峰后。试验得到的岩桥细观破坏特征与剪胀效应对研究锁固段型岩质边坡的贯通破坏机制具指导意义。 相似文献
7.
Richa Shukla P. G. Ranjith S. K. Choi A. Haque Mohan Yellishetty Li Hong 《Rock Mechanics and Rock Engineering》2013,46(1):83-93
Acoustic emissions (AE) and stress–strain curve analysis are well accepted ways of analysing crack propagation and monitoring the various failure stages (such as crack closure, crack initiation level during rock failure under compression) of rocks and rock-like materials. This paper presents details and results of experimental investigations conducted for characterizing the brittle failure processes induced in a rock due to monocyclic uniaxial compression on loading of two types of sandstone core samples saturated in NaCl brines of varying concentration (0, 2, 5, 10 and 15 % NaCl by weight). The two types of sandstone samples were saturated under vacuum for more than 45 days with the respective pore fluid to allow them to interact with the rocks. It was observed that the uniaxial compressive strength and stress–strain behaviour of the rock specimens changed with increasing NaCl concentration in the saturating fluid. The acoustic emission patterns also varied considerably for increasing ionic strength of the saturating brines. These observations can be attributed to the deposition of NaCl crystals in the rock’s pore spaces as well some minor geo-chemical interactions between the rock minerals and the brine. The AE pattern variations could also be partly related to the higher conductivity of the ionic strength of the high-NaCl concentration brine as it is able to transfer more acoustic energy from the cracks to the AE sensors. 相似文献
8.
The aim of this paper was to compare the stress and strain quantities that are related to the failure–deformation process of hard rock. The data used here was obtained from laboratory uniaxial compression tests performed on different types of Fennoscandian hard rocks. The failure–deformation process quantities were compared at each deformation stage and for each single specimen. Moreover, geological information such as the rock origin process and the rock characteristics of the specimens were studied and linked to the stress and strain quantities. The purpose was to investigate the influence of the rock origin process and rock characteristics on these quantities. The main results of this study showed that the normalized crack damage lateral strain (ε 3cd/ε 3p ) and the volumetric strain (ε crv?ci and ε v?cd) quantities were strongly affected by the grain size. The normalized and volumetric quantities are weakly dependent on the mineral composition. 相似文献
9.
目前数字图像相关方法在岩石力学领域的应用主要集中于获取变形场云图,缺乏结合一些指标对变形数据进行定量分析。采用数字图像相关方法对裂隙砂岩试件压缩加载过程进行非接触式、实时变形测量,结合方差量化描述应变场分异特征;而后对应变场方差变化曲线进行有限差分求导,量化描述应变场分异速率,分析应变场演化规律及前兆特征。研究结果表明:裂隙砂岩试件的变形破裂过程可划分为压密、弹性变形、裂纹稳定扩展、裂纹快速扩展及破坏等4个阶段。加载过程中裂隙砂岩试件的裂纹萌生和扩展行为,在应变场上表现为应变局部化带的产生与发展,进而导致应变场方差和分异速率发生变化。应变场方差-轴向应变曲线表现出阶段性特征,可划分为稳定分异、加速分异以及加加速分异等3个阶段。应变场分异速率-轴向应变曲线在张拉裂纹起裂时均出现第一个尖峰,可作为裂隙岩体失稳破坏前的前兆信号,对应的前兆应力与峰值应力之比为0.80～0.96。研究成果对工程岩体失稳预测具有较好的理论参考价值。 相似文献
10.
Conjugate flaws widely exist in rock masses and play a significant role in their deformation and strength properties. Understanding the mechanical behaviors of rock masses containing conjugate flaws is conducive to rock engineering stability assessment and the related supporting design. This study experimentally investigates the mechanical properties of conjugate-flawed sandstone specimens under coupled static–dynamic compression, thereby providing insight into how conjugate fractures interact to produce tracing tensional joints. Results indicate that the coupled compressive strength and the dynamic elastic modulus of conjugate-flawed rock specimens show remarkable loading rate dependence. For a fixed strain rate, the specimen with a static pre-stress equal to 60% of its uniaxial compressive strength has the highest coupled strength. Besides, both higher static pre-stress and strain rate can induce smaller mean fragment size and greater fractal dimension of the specimen, corresponding to a more uniform distribution of the broken fragments with smaller sizes. When the static pre-stress is lower than 80%UCS, the flawed specimen under a higher strain rate is characterized by higher absorbed energy. However, when the pre-stress equals 80%UCS, the value of the energy absorbed by the specimen in the dynamic loading process is negative due to the release of the preexisting considerable elastic strain energy input from the static pre-loading. As for the failure modes, cracks always penetrate the preexisting ipsilateral flaw tips to form anti-wing cracks. Under dynamic loading, the conjugate-flawed specimen generally shows tensile failure at a low strain rate, while the shear failure dominates at a high strain rate. In addition, based on progressive failure processes of the conjugate-flawed rock specimens, the evolution of tracing tensional joints in the field is discussed.
相似文献11.
Strain Rate Dependency of Coarse Crystal Marble Under Uniaxial Compression: Strength,Deformation and Strain Energy 总被引：2，自引：1，他引：1
Strain rate during testing, uniaxial or triaxial, has important influence on the measured mechanical properties of rocks. Uniaxial compression tests were performed at nine pre-specified static-to-quasistatic strain rates (ranging from 1 × 10?5 to 1 × 10?1 s?1) on coarse crystal marble. The aim is to gain deep insight into the influence of strain rate on characteristic stresses, deformation properties and conversion of strain energy of such rock. It is found that the strain rate of 5 × 10?3 s?1 is the threshold to delineate the failure modes the tested coarse marble behaves in. At a strain rate less than this threshold, single-plane shear and conjugate X-shaped shear are the main failure modes, while beyond this threshold, extensile and splitting failures are dominant. The stress for crack initiation, the critical stress for dilation, the peak stress, and Young’s modulus are all found to increase with strain rate, with an exception that the above stresses and modulus appear relatively low compared to the strain rate in the range of between 1 × 10?4 and 5 × 10?3 s?1. The pre-peak absorbed strain energy, damage strain energy and elastic strain energy are found to increase with strain rate. In addition, the elastic strain energy stored before peak point favors brittle failure of the specimen, as the more stored elastic energy in the specimen, the stronger the fragmenting. 相似文献
12.
为了研究径向压缩下圆环试样孔壁处的应力特征,利用厚度为34 mm,外径为50 mm的完整圆盘及不同内径（8～30 mm）的圆环砂岩试样,在巴西劈裂试验中测量孔壁的应变变化,分析试样的力学特性。试验结果表明：圆环试样的峰值载荷随着内径的增大而逐渐减少。圆盘和内径较小的圆环试样达到峰值载荷时出现了失稳破坏,载荷迅速跌落：当内径大于 16 mm,圆环试样达到峰值载荷后,载荷略有下降,但是试样并没有出现失稳破坏,而是持续压缩一定时间后才破裂。圆环最弱部位拉应力不是材料参数,而是一个结构参数,且随圆环内径而变化,基于弹性理论的Hobbs公式不能用于计算岩石抗拉强度。孔壁岩石的破裂只能是达到拉伸变形极限才会破裂,不能以拉伸应力作为破坏指标。研究结果为理解岩石在压拉组合下的力学特征提供了参考。 相似文献
14.
为明确巷道浅层破碎围岩锚注加固承载特性，开展了不同岩体粒径、岩性、锚杆数量等因素影响下对比试验。研究结果表明：（1）试件承载能力随粒径增大呈现先增大后减小的趋势，与相同条件下无锚试件相比，含锚试件峰值应力平均提高了53.38%，峰值应变平均减小了46.43%。（2）含锚条件下，与支护面相对的自由面及附近为宏观破裂优先发展区域，支护面破坏一般均滞后于自由面，试件由拉伸破坏为主，逐渐过渡到拉剪混合式破坏；无锚条件下，试件以拉伸破坏为主。（3）锚杆数量增加，试件承载能力逐渐增大，但是增长速率逐渐变缓，峰值应变减缓与峰值应力增长拐点一致。（4）试件具有渐进再破坏的3个特征：一是应力峰值前产生的裂纹在峰后阶段继续扩展；二是支护面表面材料随着裂纹拉伸产生剥落；三是裂纹由表面逐渐向试件内部发展，先是岩块脱落，随后宏观破坏发展到锚杆区域，造成试件整体承载能力丧失。 相似文献
15.
岩石抗压强度和变形参数是岩石工程设计的重要指标。由于岩石是典型的非均质材料,其强度和变形特性随样品尺
寸的变化而不同。本文采用PFC2D程序模拟了不同围压下不同尺寸岩样的压缩试验。结果表明（1） 岩样具有明显的尺寸效
应。同一围压下,尺寸越大,岩石强度、峰值应变和压缩模量越小,尺寸的变化对岩样的破坏模式影响较小;（2） 岩样具
有明显的围压效应。同一尺寸的岩样,随着围压的增大,岩石强度、峰值应变和压缩模量均增加,其中强度和峰值应变随
围压的增加呈线性增加。同时,随着围压的增大,岩石破裂模式由轴向劈裂破坏向剪切破坏变化;（3） 围压的存在会影响
岩样的尺寸效应。不同尺寸岩样的强度和峰值应变在相同围压区间内的增量基本相同,同时随着围压的增大,其强度和峰
值应变增加,进而使岩石强度和峰值应变的尺寸效应弱化;而不同尺寸岩样的压缩模量在相同围压区间内的增长率大致相
同,因而造成围压对压缩模量尺寸效应的影响较小 相似文献
16.
岩石变形破坏过程中渗透率演化规律的试验研究 总被引：12，自引：5，他引：7
利用伺服试验机对灰岩和砂岩进行了应力应变全过程渗透性试验,研究了岩样变形和破坏过程中的轴向应变与渗透率之间的关系,分析了岩样环向应变对渗透率的影响规律,探讨了岩样变形破坏前后渗透压差随时间的变化关系。结果表明,岩样渗透率与应力状态密切相关,渗透率的峰值滞后或超前于应力应变峰值,这与岩石介质本身的特性有关;渗透率-环向应变曲线与渗透率-轴向应变曲线有相同的变化趋势,但岩石环向变形比轴向变形更能灵敏地反映渗透率的演化规律;岩样变形破坏峰值前后的渗透压差与时间均遵循负指数关系。最后对岩石变形破坏过程中的渗透机理作了讨论。 相似文献
17.
结合当前我国矿井高强度快速推采的现状,系统分析了双轴加载速率对大尺寸岩体破裂的影响规律。以山东能源济宁矿区深部岩体所处的复杂环境为背景,确定了与深部岩体力学特性相似的混合砂浆材料的最优配比。采用自主研发的岩石应力-渗流耦合真三轴试验系统和美国生产的PCI-2声发射系统,分析了双轴加载下加载速率对大尺寸试样破裂的影响规律,揭示了加载过程中单裂隙和双裂隙试样的破裂和声发射行为特征。研究表明:当加载速率为1.5 kN/s时,单裂隙试样在剪切作用下易起裂形成反翼裂隙;试样双裂隙的岩桥倾角越大,越有利于试样的加速破坏,产生的声发射事件数较少,表现出岩体破裂的突变性。 相似文献
18.
为研究水力耦合作用下砂岩裂纹扩展特征,开展了不同孔隙水压和围压条件的砂岩破坏试验。结果表明：有效围压相同,随着孔隙水压力增大,脆性指标数增大,起裂应力、损伤应力和峰值应力都变小;裂纹初始体积应变变小,裂纹扩展体积应变先减小后增大,损伤应力与峰值应力对应的裂纹轴向应变扩展速率、裂纹环向应变扩展速率增加,裂纹体积应变扩展速率与孔隙水压力关系不明显。孔隙水压力相同,随着有效围压增加,起裂应力、损伤应力和峰值应力增大。起裂应力、损伤应力、峰值应力对应的裂纹轴向应变扩展速率、裂纹环向应变扩展速率和裂纹体积应变扩展速率增大。同一块砂岩特征应力点的裂纹应变扩展速率比较,裂纹轴向应变扩展速率最大,裂纹环向应变扩展速率次之,裂纹体积应变扩展速率最小。 相似文献
19.
加载速率对裂隙岩体的力学性质及变形破坏均有重要影响。利用二维颗粒流程序PFC2D开展了不同倾角非贯通单裂隙砂岩试件的单轴压缩试验,研究了中等应变率对裂隙砂岩应力-应变曲线特征、裂隙尖端应力状态、特征应力状态、岩体损伤及裂隙扩展等力学响应的影响规律。裂隙岩体应力-应变曲线呈现明显的波动性,定义应力突变指标 对应力突变型波动剧烈程度进行了定量统计分析：随应变率的增加,曲线应力突变波动越剧烈,且峰后明显大于峰前;随裂隙倾角的增大,波动幅度峰前增大,而峰后减小。裂隙尖端破裂应力随应变率增大均有所提高,随裂隙倾角的增大,切向剪应力 总体上呈增加变化,而法向应力 明显减小。尖端破裂时岩样加载应力 、岩样临界扩容应力 及峰值应力 均随应变率增大而增大。裂隙尖端的破裂可立即引起岩体扩容,一般应变率越低,岩体裂隙尖端破裂点 和扩容点 越接近峰值强度 。随着应变率的提高,损伤裂纹及宏观裂隙类型越多,岩体试件损伤破裂程度越强,特别是试件端部效应愈显著。裂隙首先以I型翼裂纹在其尖端起裂,而I型翼裂纹的扩展长度与加载速率与裂隙倾角具有较强的相关性。 相似文献
20.
基于PIV技术,采用相似材料预制贯通单裂隙岩体试件并开展压-剪试验,探究了裂隙开度对贯通单裂隙试件的强度、变形及破坏过程的影响。结果表明:(1)试件发生初始断裂时不同裂隙开度试验组应力均明显下降,且随着开度的增大裂隙岩体胶结部位塑性变形增强,岩体试件的特征应力值减小;(2)裂隙开度影响到裂隙和胶结部位变形在试件总变形中所占比例,进而影响裂隙试件的轴向峰值应变和横向峰值应变,开度越大裂隙试件的轴向峰值应变与横向峰值应变越小;(3)随着开度增大试件初始断裂部位由中下部向中上部转移,同时试件逐渐由拉伸剪切复合破坏转变为单一的剪切破坏;(4)需达到位移阈值k试件表面才能产生裂隙,而预制裂隙开度增大会降低试件的位移阈值k。其结果为研究深部矿井裂隙沟通造成的突水溃砂机理奠定了一定的基础。 相似文献