首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Abstract

This paper describes the Neogene evolution of north-Western Anatolia based on geological data collected in the course of a new mapping program. The geological history of the region, as recorded by the Neogene sedimentary and magmatic rocks that overlie the Paleozoic-Triassic basement, began after a lake invasion during the Early Miocene period with the deposition of shale-dominated successions. They were accompanied by calc-alkaline intermediate lavas and pyroclastic rocks ejected through NNE trending fractures and faults. The Lower-Middle Miocene successions were deformed under a compressional regime at the end of the Middle Miocene. The deposition of the overlying Upper Miocene-Lower Pliocene successions was restricted to within NE-SW trending graben basins. The graben bounding faults are oblique with a major strike-slip displacement, formed under approximately the N-S extension. The morphological irregularities formed during the Miocene graben formations were obliterated during a severe erosional phase to the end of the deposition of this lacustrine succession. The present E–W graben system as exemplified from the well-developed Edremit graben, postdates the erosional phase, which has formed during the Plio-Quaternary period. © 2001 Éditions Scientifiques et médicates Elsevier SAS  相似文献   

2.
《Geodinamica Acta》2001,14(1-3):45-55
Field studies on the Neogene successions in south of İzmir reveal that subsequent Neogene continental basins were developed in the region. Initially a vast lake basin was formed during the Early–Middle Miocene period. The lacustrine sediments underwent an approximately N–S shortening deformation to the end of Middle Miocene. A small portion of the basin fill was later trapped within the N–S-trending, fault-bounded graben basin, the Çubukludağ graben, opened during the Late Miocene. Oblique-slip normal faults with minor sinistral displacement are formed possibly under N–S extensional regime, and controlled the sediment deposition. Following this the region suffered a phase of denudation which produced a regionwide erosional surface suggesting that the extension interrupted to the end of Late Miocene–Early Pliocene period. After this event the E–W-trending major grabens and horsts of western Anatolia began to form. The graben bounding faults cut across the Upper Miocene–Pliocene lacustrine sediments and fragmented the erosional surface. The Çubukludağ graben began to work as a cross graben between the E–W grabens, since that period.  相似文献   

3.
Abstract

Field studies on the Neogene successions in south of ?zmir reveal that subsequent Neogene continental basins were developed in the region. Initially a vast lake basin was formed during the early-Middle Miocene period. The lacustrine sediments underwent an approximately N-S shortening deformation to the end of Middle Miocene. A small portion of the basin fill was later trapped within the N-S-trending, fault-bounded graben basin, the Çubukluda? graben, opened during the Late Miocene. Oblique-slip normal faults with minor sinistral displacement are formed possibly under N–S extensional regime, and controlled the sediment deposition. Following this the region suffered a phase of denudation which produced a regionwide erosional surface suggesting that the extension interrupted to the end of Late Miocene–Early Pliocene period. After this event the E–W-trending major grabens and horsts of western Anatolia began to form. The graben bounding faults cut across the Upper Miocene–Pliocene lacustrine sediments and fragmented the erosional surface. The Çubukluda? graben began to work as a cross garden between the E–W grabens, since that period. © 2001 Éditions scientifiques et médicales Elsevier SAS  相似文献   

4.
《Geodinamica Acta》2001,14(1-3):57-69
There is a N–S lying narrow strip of Neogene outcrop between the towns of Kuşadası and Söke in western Anatolia. It contains remnants of successive Neogene graben basins. The first graben began to form under the control of a N40–70°E-trending oblique fault system during the Early Miocene. At the initial phase of the opening coarse clastic rocks were deposited in front of the fault-elevated blocks as scree deposits and fanglomerates. Later the graben advanced into a large lake basin. Towards the end of the Middle Miocene the lacustrine sediments of the Early–Middle Miocene age underwent an approximately N–S compressional deformation and elevated above the lake level, and were partly eroded. During the Late Miocene a new graben basin began to form as a consequence of the development of E–W-trending normal faults, formed under the N–S extensional regime. This graben also turned later into a lake environment. The lake extended far beyond the limits of the fault zones, and covered the entire regions stretching from the south of Bafa Lake in the south to Kuşadası and beyond in the north. Micritic clayey limestones were predominantly deposited in the lake. A severe erosional phase followed the termination of the lake basin. This corresponds to the cessation of the N–S extension. When the N–S extension regenerated during the Pliocene(?)–Pleistocene, the Büyük Menderes graben system began to form. In the western part of the graben, a conjugated pair of oblique faults, the Priene–Sazlı fault and the Kuşadası fault, have formed. The faults having important strike-slip components, bounded a tectonic wedge, which began to move westward into the Aegean Sea region. Major morphological features of the region were formed under the effective control of these fault zones.  相似文献   

5.
The Blue Nile Basin, situated in the Northwestern Ethiopian Plateau, contains ∼1400 m thick Mesozoic sedimentary section underlain by Neoproterozoic basement rocks and overlain by Early–Late Oligocene and Quaternary volcanic rocks. This study outlines the stratigraphic and structural evolution of the Blue Nile Basin based on field and remote sensing studies along the Gorge of the Nile. The Blue Nile Basin has evolved in three main phases: (1) pre‐sedimentation phase, include pre‐rift peneplanation of the Neoproterozoic basement rocks, possibly during Palaeozoic time; (2) sedimentation phase from Triassic to Early Cretaceous, including: (a) Triassic–Early Jurassic fluvial sedimentation (Lower Sandstone, ∼300 m thick); (b) Early Jurassic marine transgression (glauconitic sandy mudstone, ∼30 m thick); (c) Early–Middle Jurassic deepening of the basin (Lower Limestone, ∼450 m thick); (d) desiccation of the basin and deposition of Early–Middle Jurassic gypsum; (e) Middle–Late Jurassic marine transgression (Upper Limestone, ∼400 m thick); (f) Late Jurassic–Early Cretaceous basin‐uplift and marine regression (alluvial/fluvial Upper Sandstone, ∼280 m thick); (3) the post‐sedimentation phase, including Early–Late Oligocene eruption of 500–2000 m thick Lower volcanic rocks, related to the Afar Mantle Plume and emplacement of ∼300 m thick Quaternary Upper volcanic rocks. The Mesozoic to Cenozoic units were deposited during extension attributed to Triassic–Cretaceous NE–SW‐directed extension related to the Mesozoic rifting of Gondwana. The Blue Nile Basin was formed as a NW‐trending rift, within which much of the Mesozoic clastic and marine sediments were deposited. This was followed by Late Miocene NW–SE‐directed extension related to the Main Ethiopian Rift that formed NE‐trending faults, affecting Lower volcanic rocks and the upper part of the Mesozoic section. The region was subsequently affected by Quaternary E–W and NNE–SSW‐directed extensions related to oblique opening of the Main Ethiopian Rift and development of E‐trending transverse faults, as well as NE–SW‐directed extension in southern Afar (related to northeastward separation of the Arabian Plate from the African Plate) and E–W‐directed extensions in western Afar (related to the stepping of the Red Sea axis into Afar). These Quaternary stress regimes resulted in the development of N‐, ESE‐ and NW‐trending extensional structures within the Blue Nile Basin. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

6.
The Büyük Menderes and Gediz (Ala?ehir) grabens are two significant segments of the Western Anatolian extensional province. They merge around Buldan-Sar?caova in the east. Outcropping Neogene sedimentary units in this area display a rather complex structure. This paper summarizes the importance and meaning of the data obtained during a detailed investigation of the Neogene units and aims to improve our understanding of the neotectonic evolution of Western Anatolia. The Buldan-Sar?caova Neogene sequence is composed of three different sedimentary units: (1) the Lower Unit, (2) the Middle Unit, and (3) the Upper Unit. The Lower Unit crops out on the Buldan horst which is located between the Büyük Menderes and Ala?ehir grabens. The sequence starts as a coarse conglomerate and sandstone (?salar Formation) and continues as lagoonal-lacustrine mudstone, interbedded with coal seams and shales (Bostanyeri Formation) and also with lacustrine limestones. The age of this succession is Lower-Middle Miocene. The development of the basin is structurally controlled by NNW-trending normal faults. The Middle Unit begins with a conglomerate–mudstone sequence (K?z?lburun Formation), followed by a sandstone–mudstone–marl sequence (Sarayköy Formation). A lacustrine limestone–marl unit occurs at the top (Aktepe Formation). Some thin gypsum lenses and layers are observed in the Sarayköy Formation. The unit contains some brackish-water fossils. The rocks of the Middle Unit crop out mostly at the low altitudes of the Buldan horst, i.e. the southeast piedmont, around the junction of the Büyük Menderes and the Gediz grabens. The Middle Unit was deposited in fluvial and lacustrine environments during the Late Miocene–Pliocene period. These rocks were formed in response to the uplift of the Buldan horst. The Upper Unit, which is composed of conglomerates, was deposited within the Büyük Menderes Graben–Gediz Graben depressions as alluvial fill.  相似文献   

7.
《Geodinamica Acta》2003,16(2-6):131-147
Combining fieldwork and surface data, we have reconstructed the Cenozoic structural and tectonic evolution of the Northern Bresse. Analysis of drainage network geometry allowed to detect three major fault zones trending NE–SW, E–W and NW–SE, and smooth folds with NNE trending axes, all corroborated with shallow well data in the graben and fieldwork on edges. Cenozoic paleostress succession was determined through fault slip and calcite twin inversions, taking into account data of relative chronology. A N–S major compression, attributed to the Pyrenean orogenesis, has activated strike-slip faults trending NNE along the western edge and NE–SW in the graben. After a transitional minor E–W trending extension, the Oligocene WNW extension has structured the graben by a collapse along NNE to NE–SW normal faults. A local NNW extension closes this phase. The Alpine collision has led to an ENE compression at Early Miocene. The following WNW trending major compression has generated shallow deformation in Bresse, but no deformation along the western edge. The calculation of potential reactivation of pre-existing faults enables to propose a structural sketch map for this event, with a NE–SW trending transfer fault zone, inactivity of the NNE edge faults, and possibly large wavelength folding, which could explain the deposit agency and repartition of Miocene to Quaternary deformation.  相似文献   

8.
The purpose of the present study was to study the tectonics of the Yellow Sea. Although oil- gas exploration has been undertaken for more than 30 years in the southern Yellow Sea, the exploration progress has achieved little. There are three tectonic periods with near N–S trending shortening and compression (260–200 Ma, 135–52 Ma and 23–0.78 Ma) and three tectonic periods with near E–W trending shortening and compression (200–135 Ma, 52–23 Ma and 0.78 Ma) at the Yellow Sea and adjacent areas during the Mesozoic and Cenozoic. The Indosinian tectonic period is the collision period between the Sino-Korean and Yangtze Plates, which formed the basic tectonic framework for the Yellow Sea area. There were strong intraplate deformations during the Yanshanian (200–135 Ma) and Sichuanian (135–52 Ma) periods with different tectonic models, which are also the main formation periods for endogenic metallic mineral deposits around the Yellow Sea. The three tectonic periods during the Cenozoic affect important influences for forming oil-gas reservoirs. The Eocene–Oligocene (52–23 Ma) is the main forming period for oil-gas sources. The Miocene–Early Pleistocene (23–0.78 Ma) was a period of favorable passage for oil-gas migration along NNE trending faults. Since the Middle Pleistocene (0.78 Ma) the NNE trending faults are closed and make good conditions for the reservation of oil-gas. The authors suggest that we pay more attention to the oil-gas exploration at the intersections between the NNE trending existing faults and Paleogene– Neogene systems in the southern Yellow Sea area.  相似文献   

9.
Recently released seismic reflection data, together with previous seismic and well data, are used to describe the development of the Dannemarie basin, in the SW end of the Upper Rhine Graben. The Dannemarie Basin was formed during the main rifting phase of the Upper Rhine Graben as an asymmetrical graben trending NE–SW. Post-rift tectonism shifted the depocenter southward and changed the overall shape of the basin. Miocene Jura compression did not result in the formation of folds, as in the adjacent Mulhouse Horst. Strike slip faulting was dominant in the post-rift period and new faults were created, most notably the north trending and transpressional Belfort Fault. The boundary of the Dannemarie Basin with the Vosges Mountains is part of a restraining bend, which may account for the uplift of the southernmost part of the Vosges Mountains.  相似文献   

10.
针对下刚果盆地中新统重力流沉积演化及其控制因素认识不够明确的问题,利用下刚果盆地X区块丰富的三维地震、测井及岩心资料,在建立中新统层序格架的基础上,精细识别了重力流沉积单元类型,系统揭示了重力流沉积演化特征并探讨了其控制因素。区内中新统可划分为SQ1(下中新统)、SQ2(中中新统下段)、SQ3(中中新统上段)及SQ4(上中新统)等4个三级层序,主要发育块体搬运、重力流水道(包括侵蚀过路水道、受限侵蚀水道、弱受限侵蚀—加积水道)、天然堤及朵叶体等沉积单元。SQ1早期,重力流沉积多在拉张区呈NW—SE向分布,主导沉积单元为朵叶体。SQ2早期,重力流沉积分布较广(呈NW—SE向),主导发育弱受限侵蚀—加积水道。SQ3早期,重力流沉积在研究区北部呈NWW—SEE向发育且以受限侵蚀水道为主。SQ4早期,重力流沉积全区发育(E—W走向),主导发育侵蚀过路水道。SQ1～SQ4,重力流沉积总体北迁、进积。刚果河携带大量物源向深水搬运(气候变冷、构造隆升及海平面下降所致)是重力流沉积大规模进积的第一要素,陆缘结构(掀斜陆架和宽缓陆坡)及陆坡坡度变化(断层及盐构造所致)控制了沉积分散过程和砂体横向分布。该...  相似文献   

11.
Al Jabal Al Akhdar is a NE/SW- to ENE/WSW-trending mobile part in Northern Cyrenaica province and is considered a large sedimentary belt in northeast Libya. Ras Al Hilal-Al Athrun area is situated in the northern part of this belt and is covered by Upper Cretaceous–Tertiary sedimentary successions with small outcrops of Quaternary deposits. Unmappable and very restricted thin layers of Palaeocene rocks are also encountered, but still under debate whether they are formed in situ or represent allochthonous remnants of Palaeocene age. The Upper Cretaceous rocks form low-lying to unmappable exposures and occupy the core of a major WSW-plunging anticline. To the west, south, and southeast, they are flanked by high-relief Eocene, Oligocene, and Lower Miocene rocks. Detailed structural analyses indicated structural inversion during Late Cretaceous–Miocene times in response to a right lateral compressional shear. The structural pattern is themed by the development of an E–W major shear zone that confines inside a system of wrench tectonics proceeded elsewhere by transpression. The deformation within this system revealed three phases of consistent ductile and brittle structures (D1, D2, and D3) conformable with three main tectonic stages during Late Cretaceous, Eocene, and Oligocene–Early Miocene times. Quaternary deposits, however, showed at a local scale some of brittle structures accommodated with such deformation and thus reflect the continuity of wrenching post-the Miocene. D1 deformation is manifested, in Late Cretaceous, via pure wrenching to convergent wrenching and formation of common E- to ENE-plunging folds. These folds are minor, tight, overturned, upright, and recumbent. They are accompanied with WNW–ESE to E–W dextral and N–S sinistral strike-slip faults, reverse to thrust faults and pop-up or flower structures. D2 deformation initiated at the end of Lutetian (Middle Eocene) by wrenching and elsewhere transpression then enhanced by the development of minor ENE–WSW to E–W asymmetric, close, and, rarely, recumbent folds as well as rejuvenation of the Late Cretaceous strike-slip faults and formation of minor NNW–SSE normal faults. At the end of Eocene, D2 led to localization of the movement within E–W major shear zone, formation of the early stage of the WSW-plunging Ras Al Hilal major anticline, preservation of the contemporaneity (at a major scale) between the synthetic WNW–ESE to E–W and ENE–WSW strike-slip faults and antithetic N–S strike-slip faults, and continuity of the NW–SE normal faults. D3 deformation is continued, during the Oligocene-Early Miocene, with the appearance of a spectacular feature of the major anticline and reactivation along the E–W shear zone and the preexisting faults. Estimating stress directions assumed an acted principal horizontal stress from the NNW (N33°W) direction.  相似文献   

12.
Seismic stratigraphy based chronostratigraphic (SSBC) analysis of the Serbian Banat region allows the delineation of the spatial and stratigraphic relationships of the generally regressive and shallowing upward Neogene depositional fill of a tectonically unstable central portion of the Pannonian Basin. When geometrically restored in time and space, the sediment dispersal directions, sediment source directions, types of sedimentation breaks and the tectonic events influencing basin evolution can be delineated. For such an analysis the time-transgressive lithostratigraphic units used in the neighbouring Hungarian part of the Pannonian Basin are conveniently introduced based upon their characteristic seismic facies and constrained borehole log records as mappable seismic stratigraphic sequence units, termed “seismic operational sequences”. The respective Neogene stage and operational sequence equivalents (Hungarian lithostratigraphic units or formations) are the Middle Miocene (Badenian, Sarmatian), Upper Miocene-Lower Pliocene (Pannonian-Endrod and Szolnok Formations; Pontian- Algyo and Ujfalu Formations and Lower Pliocene- Zagyva Formation) and Upper Pliocene-Quaternary (Nagyalfold Formation). SSBC analysis greatly assists in the geological constraint or “geovalidation” of interpreted seismic stratigraphic relationships and provides potentially critical insight into stratigraphic and structural problems of non-unique interpretations. In the specific case, using such an approach on previously unpublished regional seismic lines, SSBC analysis reveals that the Banat region has undergone structural inversion. This may be related to changes in local stress directions along strike slip faults, which initiated in earliest Late Miocene (Endrod Formation), culminating in the reverse tilting and incipient shortening of the western graben. Therefore during the time interval that the Badenian through Endrod sediments were deposited in the graben, autocyclic progradation initiated from the Kikinda Szeged High in the East followed by Szolnok, Algyo, Ujfalu and younger units prograding from the West as the central high uplifted relative to the graben. Such tectonic inversion has substantial hydrocarbon potential implications for exploration in the region.  相似文献   

13.
《International Geology Review》2012,54(12):1401-1418
The Neogene–Quaternary succession in the Kütahya region is of importance in the neotectonic evolution of western Anatolia because the strata contain clear evidence of compression and extension. During the early-middle Miocene, N–S compression/transpression as well as NE–SW- and NW–SE-oriented oblique conjugate faults formed. NE–SW-oriented horsts and grabens developed, controlled by the dominant NE–SW faults. The Seyitömer and Sabuncup?nar grabens were filled primarily by terrestrial clastic sedimentary and volcanic rocks. At the end of the middle Miocene, the graben fill was locally folded and reverse faulted, reflecting reactivation of compression. Between the late Miocene and the middle Pliocene, the region underwent erosion and lacustrine sediments accumulated in topographic lows. Between the middle and late Pliocene, compression in the region was again reactivated and basal units were thrust over the pre-upper Pliocene units. The late Plio-Quaternary marked the onset of N–S extension and development of the NW–SE-oriented Kütahya Graben, co-genetic equivalents of which are common throughout western Anatolia. This study indicates that tectonic evolution of western Anatolia involved multiple stages of contraction and extension.  相似文献   

14.
The main exhumation of the Menderes massif, western Turkey, occurred along an originally N‐dipping Datça–Kale main breakaway fault that controlled depositions in the Kale and the Gökova basins during the Oligocene – Early Miocene interval. The isostatically controlled upward bending of the main breakaway fault brings the lower plate rocks to the surface. In the Early Miocene, E–W‐trending N‐ and S‐dipping graben‐bounding faults fragmented the exhumed, dome‐shaped massif. The development of half grabens by rolling master fault hinges has allowed further exhumation of the central Menderes massif. After the Pliocene, high‐angle normal faults cut all of the previous structures. This model suggests that the Menderes massif is a single large metamorphic core complex that has experienced a two‐stage exhumation process.  相似文献   

15.
In the Thrace Peninsula, Neogene units were deposited in two areas, the Enez Basin in the south and the Thrace Basin in the north. In the southwesternmost part of the peninsula, upper lower–lower upper Miocene continental to shallow marine clastics of the Enez Formation formed under the influence of the Aegean extensional regime. During the last stage of the transpressional activity of the NW-trending right-lateral strike–slip Balkan–Thrace Fault, which had controlled the initial early middle Eocene deposition in the Thrace Basin, a mountainous region extending from Bulgaria eastwards to the northern Thrace Peninsula of Turkey developed. A river system carried erosional clasts of the metamorphic basement southwards into the limnic depositional areas of the Thrace Basin during middle Miocene time. Deposition of fluvial, lacustrine, and terrestrial strata of the Ergene Formation, which conformably and transitionally overlie the Enez Formation, began in the late middle Miocene in the southwest part and in the late Miocene in the north‐northeast part of the basin. Activity along the NE-trending right-lateral strike–slip faults (the Xanthi–Thrace Fault Zone) extending from northeast Greece northeastwards through the Thrace Peninsula of Turkey to the southern shelf of the western Black Sea Basin began during the middle Miocene in the northern Aegean, at the beginning of the late Miocene in the southwest part, and at the end of the late Miocene in the northeast part of the Thrace region. Although the Neogene deposits in the Thrace Basin were evaluated as the products of a northerly fault, our data indicate that the NW-trending northerly fault zone became effective only during the initial stage of the basin development. The later stage deposition in the basin was controlled by the NE-trending Xanthi–Thrace Fault Zone, and the deposits of this basin progressively evolved north/northeastwards during the late Miocene. During the late early Miocene–late Miocene interval, extension within the Thrace region was part of the more regional Aegean extensional realm, but from latest Miocene time, it has been largely decoupled from the Aegean extensional realm to the south.  相似文献   

16.
The Bone Mountains, located in Southwest Sulawesi along the SE margin of Sundaland, are composed of Oligocene to possibly lower Miocene marginal basin successions (Bone Group) that are juxtaposed against continental margin assemblages of Eocene–Miocene age (Salokalupang Group). Three distinct units make up the latter: (i) Middle–Upper Eocene volcaniclastic sediments with volcanic and limestone intercalations in the upper part (Matajang Formation), reflecting a period of arc volcanism and carbonate development along the Sundaland margin; (ii) a well-bedded series of Oligocene calc-arenites (Karopa Formation), deposited in a passive margin environment following cessation of volcanic activity, and (iii) a series of Lower–Middle Miocene sedimentary rocks, in part turbiditic, which interfinger in the upper part with volcaniclastic and volcanic rocks of potassic affinity (Baco Formation), formed in an extensional regime without subduction.The Bone Group consists of MORB-like volcanics, showing weak to moderate subduction signatures (Kalamiseng Formation), and a series of interbedded hemipelagic mudstones and volcanics (Deko Formation). The Deko volcanics are in part subduction-related and in part formed from melting of a basaltic precursor in the overriding crust. We postulate that the Bone Group rocks formed in a transtensional marginal basin bordered by a transform passive margin to the west (Sundaland) and by a newly initiated westerly-dipping subduction zone on its eastern side.Around 14–13 Ma an extensional tectonic event began in SW Sulawesi, characterized by widespread block-faulting and the onset of potassic volcanism. It reached its peak about 1 Ma year later with the juxtaposition of the Bone Group against the Salokalupang Group along a major strike-slip fault (Walanae Fault Zone). The latter group was sliced up in variously-sized fragments, tilted and locally folded. Potassic volcanism continued up to the end of the Pliocene, and locally into the Quaternary.  相似文献   

17.
The Denizli Basin (southwestern Anatolia, Turkey) contains a record of environmental changes dating since the Early Miocene. Detailed facies analysis of the Neogene formations in this half-graben enables us to document successive depositional regimes and palaeogeographic settings. Sedimentation commenced in the Early Miocene with the deposition of alluvial-fan and fluvial facies (K?z?lburun Formation). At this stage, alluvial fans sourced from elevated areas to the south prograded towards the basin centre. The Middle Miocene time saw the establishment of marginal lacustrine and wetland environments followed by the development of a shallow lake (Sazak Formation). The uppermost part of this unit consists of evaporitic saline lake and saline mudflat facies that grade upward into brackish lacustrine deposits of Late Miocene-Pliocene age (Kolankaya Formation). The lake became shallower at the end of the Pliocene time, as is indicated by expansion shoreface/foreshore facies. In the Early Quaternary, the Denizli Basin was transformed into a graben by the activation of ESE-trending normal faults. Alluvial fans were active at the basin margins, whereas a meandering river system occupied the basin central part.Oxygen isotope data from carbonates in the successive formations show an alternation of wetter climatic periods, when fresh water settings predominated, and very arid periods, when the basin hosted brackish to hypersaline lakes. The Neogene sedimentation was controlled by an active, ESE-trending major normal fault along the basin's southern margin and by climatically induced lake-level changes. The deposition was more or less continuous from the Early Miocene to Late Pliocene time, with local unconformities developed only in the uppermost part of the basin-fill succession. The unconformable base of the overlying Quaternary deposits reflects the basin's transformation from a half-graben into a graben system.  相似文献   

18.
The Miocene Lavanttal Basin formed in the Eastern Alps during extrusion of crustal blocks towards the east. In contrast to basins, which formed contemporaneously along the strike-slip faults of the Noric Depression and on top of the moving blocks (Styrian Basin), little is known about the Lavanttal Basin. In this paper geophysical, sedimentological, and structural data are used to study structure and evolution of the Lavanttal Basin. The eastern margin of the 2-km-deep basin is formed by the WNW trending Koralm Fault. The geometry of the gently dipping western basin flank shows that the present-day basin is only a remnant of a former significantly larger basin. Late Early (Karpatian) and early Middle Miocene (Badenian) pull-apart phases initiated basin formation and deposition of thick fluvial (Granitztal Beds), lacustrine, and marine (Mühldorf Fm.) sediments. The Mühldorf Fm. represents the Lower Badenian cycle TB2.4. Another flooding event caused brackish environments in late Middle Miocene (Early Sarmatian) time, whereas freshwater environments existed in Late Sarmatian time. The coal-bearing Sarmatian succession is subdivided into four fourth-order sequences. The number of sequences suggests that the effect of tectonic subsidence was overruled by sea-level fluctuations during Sarmatian time. Increased relief energy caused by Early Pannonian pull-apart activity initiated deposition of thick fluvial sediments. The present-day shape of the basin is a result of young (Plio-/Pleistocene) basin inversion. In contrast to the multi-stage Lavanttal Basin, basins along the Noric Depression show a single-stage history. Similarities between the Lavanttal and Styrian basins exist in Early Badenian and Early Sarmatian times.  相似文献   

19.
This paper discusses the Neogene tectonic evolution of the Tunisia offshore Gulf of Hammamet basin. Based on seismic and well data, this basin was created during the Miocene and is currently trending NE–SW. During the Neogene, the study area was affected by geodynamic interactions controlled simultaneously by convergence of the Eurasia and Africa plates and the opening of the Atlantic Ocean. These interactions generated compressive and extensional regimes which led to a variety of structures and basin inversions.The middle Miocene extensional regime created horst and graben structures (e.g. the Halk El Menzel graben). The two major compressive phases of the Tortonian and post Villafranchian age created different structures such as Ain Zaghouan and Fushia structures and the Jriba trough, and led to the reactivation of the old normal faults as reverse faults. During the Plio-Pleistocene and the Quaternary times, the Gulf of Hammamet was affected by an extensional regime related to the Siculo-Tunisian rift, which led to the development in the area of several sedimentary basins and new normal fault patterns.The Gulf of Hammamet shows several basins ranging in age from the Tortonian to the Quaternary, which display different structural and stratigraphic histories. Two main groups of sedimentary basins have been recognized. The first group has Tortonian–Messinian sedimentary fill, while the second group is largely dominated by Plio-Quaternary sediments. The shortening during the Tortonian and post Villafranchian times has led to the tectonic inversion of these basins. This shortening could be correlated to the Europe–Africa collision.Despite the large number of hydrocarbon discoveries, the Gulf of Hammamet remains under-explored, in particular at deeper levels. This study aims to guide future exploration and to highlight some new play concepts.  相似文献   

20.
The Northern, Central, and Southern zones are distinguished by stratigraphic, lithologic, and structural features. The Northern Zone is characterized by Upper Silurian–Lower Devonian sedimentary rocks, which are not known in other zones. They have been deformed into near-meridional folds, which formed under settings of near-latitudinal shortening during the Ellesmere phase of deformation. In the Central Zone, mafic and felsic volcanic rocks that had been earlier referred to Carboniferous are actually Neoproterozoic and probably Early Cambrian in age. Together with folded Devonian–Lower Carboniferous rocks, they make up basement of the Central Zone, which is overlain with a angular unconformity by slightly deformed Lower (?) and Middle Carboniferous–Permian rocks. The Southern Zone comprises the Neoproterozoic metamorphic basement and the Devonian–Triassic sedimentary cover. North-vergent fold–thrust structures were formed at the end of the Early Cretaceous during the Chukchi (Late Kimmerian) deformation phase.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号