首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
V. Acocella 《地学学报》2000,12(4):149-155
The Amiata area is characterized by an uplift attributed to pluton emplacement during the Pliocene epoch. The shape of the buried pluton is constrained by gravity data. Fieldwork was carried out to identify possible deformations within the overburden, in order to evaluate the mechanism of emplacement. The attitudes of Lower Pliocene marine sediments, deposited immediately before the uplift, were measured also. The overall pattern of the deposits defines a dome, approximately 2.5 km high and 35 × 50 km wide. Consistency between these field data and the existing geophysical data suggests that the dome results from the emplacement of a laccolith-like intrusion which was responsible for lifting and flexuring the overburden. The Amiata case shows that roof lifting is a viable process by which space in the upper crust, to a depth of 7 km, can be accommodated during pluton emplacement.  相似文献   

2.
Late Carboniferous to Early Permian A-type granites are extensively distributed throughout the West Junggar region, NW China, and the Akebasitao pluton is extremely distinguished among these plutons. In this paper, we reported new anisotropy of magnetic susceptible (AMS) data combine with detailed field study and audio magnetotelluric (AMT) sounding to assess the three-dimensional shape and magmatic emplacement mechanism of the Akebasitao pluton. The geological features and the AMT sounding indicate that the pluton had a slightly oblique movement of magma from northwest to southeast, which was most likely to correspond to an asymmetrical torch with a laccolith-shaped upper part, and a lower part formed by sub-vertical “root” that was located within its northwestern part, probably controlled by the NE-trending Anqi fault. The AMS fabrics of all the specimens reveal a low Pj value (mean of 1.02) and a low T value (mean of ?0.024), suggesting that the deformation of the AMS ellipsoid is relatively weak. The specimens exhibit both oblate and prolate shapes of the AMS ellipsoid. Magnetic lineations and foliations are randomly distributed throughout the pluton without any preferred orientation. These AMS patterns indicate that the pluton formed in a relatively stable structural environment with no regional extrusion. Therefore, we propose a complex emplacement process in which the magmas reached the shallower crust levels via deep-faults and subsequently occupied the room created by doming, accompanied by stoping near the pluton roof. Additionally, the regional tectonic setting was relatively stable during the emplacement of the Akebasitao pluton, indicating the termination of compressional orogeny during the late Late Carboniferous in the West Junggar region. This conclusion perfectly coincides with the regional tectonic paleogeography, magmatic system, and paleostress field.  相似文献   

3.
The role of regional extension on the rise and emplacement of granites in the crust is still debated. Pluton ascent and emplacement widely occurred in Tuscany (Italy) since late Miocene during the post-orogenic collapse of the inner Apennines, and are presently occurring in the geothermal areas of Amiata and Larderello. Tuscany offers a preferred test site to study the role of regional extension on pluton ascent and emplacement at different crustal levels. Ductile extension enhanced the segregation and ascent of granitic melts in the lower crust, controlling pluton emplacement in correspondence with the brittle–ductile transition. In the brittle crust, magma ascent occurred through subvertical faults and fractures compatible with the regional extension direction; pluton emplacement mainly occurred by means of roof lifting. The case of Tuscany suggests that the extensional structures enhance melt segregation and ascent in the ductile crust, but are not efficient alone to provide a pathway for the ascent of granitic magmas in the brittle-extending crust. The estimated magmatic strain rates due to pluton emplacement in the geothermal areas are much larger than the regional tectonic strain rates. This suggests that regional tectonics did not control magma emplacement in the brittle crust and explains why nontectonic processes (roof lifting) accommodated the space required for pluton emplacement.  相似文献   

4.
The Slaufrudalur Pluton is a granitic pluton in the Tertiary lava pile of Southeast Iceland. Excellent exposures of its roof and walls made it possible to map the shape of the pluton with high-resolution GPS. Based on the GPS mapping and field observations, we reconstructed the three-dimensional shape of the Slaufrudalur Pluton with the aim to test which implications on the mechanisms of emplacement can be derived from this approach. The reconstructed pluton shape is characterised by steep walls and a flat roof at map-scale. This shape and the internal compositional layering indicate that the pluton was probably emplaced by cauldron subsidence along subvertical faults that are parallel with the strike of the regional fissure swarms. At the roof contact, the pluton exploited the original layering of the flood basalts. At outcrop-scale, however, the roof was modified by magmatic stoping, which resulted in a step-like pattern on a scale that cannot be resolved in the three-dimensional model. Hence, the reconstruction of the three-dimensional shape of the Slaufrudalur Pluton, combined with structural field studies, provided valuable information about the mechanism of its emplacement on pluton-scale. For a comprehensive understanding of all mechanisms involved in the emplacement of the Slaufrudalur Pluton, detailed structural field studies remain essential.  相似文献   

5.
The Coastal Batholith of Peru extends over 1600 km parallel to the coast along the Andean trend. Gravity profiles on three traverses across the batholith indicate the geometry is essentially that of a flat slab with average thickness from 2.0–3.2 km, and a thick root 4–10 km wide to the west. Granitic material does not extend to depths greater than 3 km below sea level datum.This study supports recent gravity work which indicates plutons are commonly thin, 5 km or less in thickness. Detailed mapping in the Lima segment of the Coastal Batholith reveals thin plutons where space was made dominantly by downward displacement via floor depression. However, early roof uplift also created some space. Stoping occurs but is not a major space maker. Floor depression may be modelled by cantilever or piston mechanisms and although the strong marginal deformation with mylonites, tuffisites, microbreccia, faults and shear zones suggests the piston model best describes the mechanism of emplacement of much of the Coastal Batholith some space was probably made by a cantilever mechanism. In brief, space making processes involved early roof uplift and regional doming, then floor depression mainly by piston and probably subsidiary cantilever mechanisms and, finally, local stoping producing the cut-out rectilinear nature of the batholith.The Coastal Batholith formed on shallow partial melting of hydrous basaltic marginal basin rocks between 5 and 10 km. Floor depression occurred as the crustal column foundered into an actively deflating layer of partial melt. This is an efficient space making process and is limited here to shallow levels of the upper crust only. The melts ascended to within 2 or 3 km of the surface, up dyke-like conduits then spread horizontally to form tabular plutons.  相似文献   

6.
TAYLOR  W.P. 《Journal of Petrology》1976,17(2):194-218
Regression surface techniques have been used on partial whole-rockchemical analyses from the Puscao pluton to establish the three-dimensionalnature of the chemical variations within this body, which wasemplaced at a depth of between 4 km and 8 km within the crust.Block diagrams produced by the computer program are consistentwith the hypothesis that during the period preceding the totalconsolidation of the magma, the pluton has undergone in situdifferentiation to give a layered structure. Statistical analysis confirms that there is a large scale variationwithin the pluton and that local variation, such as might beexpected to result from the contamination of the Puscao magmaby assimilated volcanic material, did not contribute significantlyto the overall variation. Evidence is presented which suggests that the layering withinthe Puscao pluton was disturbed as a result of the emplacementof the much later Cañhas pluton, and that this disturbancehas the form of a simple doming centred upon the site of thepresent Cañas intrusion.  相似文献   

7.
The Bruinbun pluton is a small, massive, I‐type granitoid intruded into the meta‐sedimentary Hill End Trough, in eastern N.S.W. It is a multiple pluton representing two discrete magma pulses, the granodiorite core intruding the adamellite margin. A weak alignment of orthoclase megacrysts in the granitoids is best developed adjacent to both the internal and external intrusive contacts, and is considered by the writer to be a product of magmatic flow. Part of the northern contact and the southern and western contacts dip inward at moderate angles, whereas the eastern contact is vertical to outward‐dipping. The pluton is inferred to be mushroom‐shaped, and slightly tilted.

The intensity of aureole deformation is low. The aureole has been flexed into concordancy with the pluton roof, and a rudimentary rim fold‐zone is present around lower levels of the pluton. Intrusion of the granitoid is inferred to be primarily by uplift of its roof and depression of its floor.

The highest‐grade contact metamorphic parageneses developed are: cordierite‐K feldspar‐biotite‐quartzite ± andesine ± epidote in metapelites, and ferrohornblende‐biotite‐muscovite‐andesine‐epidote‐quartz in metavolcarenites. No intrusion‐related foliation or lineation was formed.  相似文献   

8.
商城岩体位于大别造山带北淮阳火山岩带中段,被早白垩世金刚台组火山岩不整合覆盖,厘定其侵位时间和成因对于揭示大别造山带晚中生代构造演化具有重要意义.对岩体进行SHRIMP锆石U-Pb测年和岩石地球化学研究,岩体中心相肆顾墩单元巨斑状二长花岗岩15个锆石测点中有13个测点的206Pb/238U年龄加权平均值为130.2±1.7 Ma,代表商城岩体最终就位的时间.商城岩体具有高含量的Al2O3、Sr,高Sr/Y值和低含量的Y、Yb,轻重稀土分馏显著,无Eu异常（δEu=0.90~1.05）,发育Nb、Ta负异常,具有埃达克质岩石的地球化学特征.商城岩体3个岩相单元从早到晚长英质矿物结晶压力降低,侵位深度显著变浅,为挤压作用下主动侵位的结果.商城岩体是大别造山带早白垩世岩浆爆发的产物,岩浆起源于加厚下地壳的部分熔融,从商城岩体开始侵位至金刚台组火山岩喷发,该区地壳经历快速的隆升和剥蚀,而这一过程正是两者地球化学属性所反映的加厚下地壳减薄的浅表响应,130 Ma是大别造山带晚中生代构造体制转换的时间.   相似文献   

9.
The Huamenlou pluton,is an elongated granite intrusion with high aspect ratio,emplaced within the southern margin of the North Qinling(central China).Here we investigate this pluton through multiple techniques including the fabric study,microstructural observation and zircon geochronology.Our zircon U-Pb data confirm that the granite crystallized at ca.462 Ma which is consistent with the ages of other linear plutons in North Qinling.Microstructural observations of the Huamenlou granites illustrate that the pluton has undergone superimposed deformation during its emplacement,from magmatic to hightemperature solid state conditions.The internal fabric obtained by anisotropy of magnetic susceptibility(AMS)and shape preferred orientation(SPO)show similar results.The fabrics are relatively concordant and generally vary from NE-SW to NEE-SWW which are roughly oblique to the trend of the pluton elongation and the regional structures.Meanwhile,scalar parameters reflect two completely different strain regimes for the pluton and its host rocks,i.e.,the fabrics within host rocks are mainly oblate while the central part of the intrusion displays mainly prolate fabrics.It is inferred that the structural pattern recorded in this pluton was caused by local dextral transtension in consequence of oblique convergence between the South and North China Blocks.We propose that the local transtension in convergence setting probably evolved from vertical extrusion tectonics that provided room for the magma emplacement and imparted prolate fabrics in the Huamenlou pluton.  相似文献   

10.
《Geodinamica Acta》2013,26(3-4):165-184
Models consisting of a thick overburden resting on a buoyant layer were sheared and centrifruged in order to study the relationship between strike-slip shear zones and intrusions of buoyant material. Three experiments were carried out: In model 1, where the overburden consisted of a viscous material, no diapirs formed even after shearing for 40 mm (? = -1.07) and 27 min centrifuging. In models 2 and 3, where the overburden was semi-brittle, prescribed cuts at two different orientations (model 2: parallel to s1; model 3: perpendicular to s1) were initiated in the overburden in order to see whether such cuts acted as pathways for intrusion. In model 2 the prescribed cuts were used by the buoyant material as pathways when the cuts opened during shearing. Continued shearing widened the cuts and allowed the buoyant material to extrude on the surface of the model forming a coalesced elliptical sheet. In model 3. the cuts were closed during shearing and prevented the intrusion of the buoyant material. During further shearing, the cuts rotated and activated as strike-slip faults bounding pull-apart basins. Such pull-apart basins were not deep enough to tap the buoyant material. Nevertheless, the results of the experiments suggest that magma ascends in shear zones not as diapirs, but rises along preexisting pathways as dykes. Model results were used to evaluate emplacement of the Fürstenstein Intrusive Complex (FIC) in the Bavarian Forest, whose magnetic and structural inventory have been investigated in detail. The pluton consists of 5 magma batches, each with distinct magnetic fabrics. which are interpreted as the result of magma intrusion along opening and rotating tension gashes within the BPSZ stress field. Shear failure of the crust in the FIC area due to thermomechanical weakening provided the space for the emplacement of the last and biggest granite magma batch. Overall, the emplacement history of the FIC fits perfectly with the observations made during experiment 2 and indicates that magma ascent in shear zones is bound to tension gashes.  相似文献   

11.
The Kalpatta granite, of Pan-African age occurs in the southern granulite terrain of Peninsular India. Bouguer anomaly map of the Kalpatta and adjoining areas reveals a gravity low of 8–10 mGal centered over the Kalpatta granite and a minor low of 4–6 mGal over the adjacent Ambalavayal granite pluton. The residual anomaly map prepared for the Kalpatta granite has been utilized to obtain depth extent and 3-D geometry of the pluton. The analysis suggests that the Kalpatta granite is an elliptical and somewhat pear shaped body with horizontal dimensions of 6–11 km and extending to a depth of 6.5km, has steeply inward dipping contacts and the shape seen on the surface continues throughout its depth. The smooth oval shape could indicate low ductility contrast, deeper level of emplacement and permissive nature of the pluton. The 3-D depth model indicates an oblique section with much deeper levels exposed in the south, in other words, the crustal block encompassing the pluton has suffered a NNW tilt during uplift after the emplacement. It is further inferred that there was no post intrusive shape modification, the NW tilting of the region and denudation gave rise to the present outcrop pattern of the body.  相似文献   

12.
The Hercynian Bordères-Louron pluton (20 km2) in the Central Pyrenees intrudes Devonian and Carboniferous metasediments. It shows a concentric zoning and consists of a significant proportion of (quartz) gabbros in its periphery, and of granodiorites, biotite monzogranites and biotite-muscovite monzogranites in its core. AMS study shows that the pluton corresponds to an elongated dome with a N100°E-trending axis. The anisotropy intensity Ppara% is high in the south and in the core of the pluton, whereas it is low in the north. The shape parameter T indicates that the fabric is strongly planar in a large central band oriented NW-SE, whereas it is strongly linear in the western and eastern tips of the pluton. These characteristics suggest that the Bordères-Louron pluton emplaced in two episodes: (1) intrusion of mafic magmas along a N100°E sill parallel to the regional foliation of the host metasediments; and (2) injection of three successive silicic batches (granodiorite, biotite monzogranite, two-micas monzogranite) which pushed aside the early mafic injections. In situ U-Pb dating of zircon grains indicates that the emplacement age of the biotite monzogranite is 309 ± 4 Ma, synchronous with the D 2 dextral transpressive event and close to the ages of the eastern Pyrenean plutons, may be slightly older.  相似文献   

13.
《International Geology Review》2012,54(11):1977-1986
Akba-i-Dzhurnon intrusion possesses a great many of the common primary fractures, planar and linear flow structures, schlieren-arch fabric features of many of the medium to coarse grained to porphyritic textured Precambrian plutons of the world. The following features are most important with regard to this pluton: 1) a sequential triple emplacement of granite-adamellite magma occurred, 2) the Main phase emplacement lowered magma level in magma chamber and resulted in subsidence of the core of Archannaydansk anticline under the dense sheeted-arch structure of the Tangisaysk thrust and the space created was occupied by magma; 3) subphase granites were injected along same fault systems as main phase pulses but were between the earlier injections and intervals between injections of different phases were short; 4), the pluton is post-tectonic; 5) porphyritic textures were developed in a combined pneumatolytic-magmatic crystallization stage; 6) trachytic structure formed during crystallization of orthoclase, and 7) conditions of alternating roof load and lateral pressure acting roughly perpendicular to the long axis of the pluton prevailed during its emplacement. — R. M. Hutchinson.  相似文献   

14.
  相似文献   

15.
松辽盆地变质核杂岩和伸展断陷的构造特征及成因   总被引：18，自引：3，他引：15  
文中讨论了松辽盆地北部中央基底隆起变质核杂岩和徐家围子伸展断陷的构造特征、成因和演化 ,重点讨论了下列问题 :( 1)中央基底隆起变质核杂岩具有科迪勒拉变质核杂岩的许多特征 ;( 2 )识别出组成中央基底隆起变质核杂岩的多层次、低角度韧性拆离体系 ,它们是使中地壳的中深变质岩层抽拉至上地壳的主要原因 ;( 3)穹窿状火山岩台地于晚侏罗世 ( 145.7±6.2 )Ma形成 ,受顶部拆离断层控制的伸展断陷于早白垩世 ( 133～ 12 0Ma)形成 ,而邻近顶部拆离断层的糜棱岩年龄为 ( 12 6.7± 1.54)Ma。这表明变质核杂岩的形成始于晚侏罗世。早白垩世递进的伸展构造与变质核杂岩较深部的部分上拱至地表相伴生 ,推测该变质核杂岩的上拱和剥露、火山岩台地和伸展断陷盆地的形成可能是由伊泽奈奇和亚洲板块陆陆碰撞后的地幔拆沉作用、地幔的岩浆底侵作用以及伸展垮塌作用联合造成的。  相似文献   

16.
We modelled thermo-rheological perturbations, related to the emplacement of a magmatic body in the upper crust. This approach was considered relevant for the areas characterized by elevated surface heat flow and chiefly for the geothermal fields. The numerical conductive thermal model applied to the Larderello geothermal area in Tuscany, allowed to constrain size, depth and timing of emplacement of the pluton. We inferred that the emplacement of a magmatic body, at a minimum depth of 3 km, having a horizontal extension of 14 km and a maximum thickness of 8 km, can reasonably reproduce the observed regional surface heat flow anomaly of the Larderello area, when 300 (± 100) kyr are elapsed from the magma emplacement. Even assuming an incremental growth, the first magma injection should not be older than 1 ± 0.3 Ma.

Results of the thermal model were used to set up a rheological model and to simulate the drifting of the brittle-ductile transition during the cooling of the pluton. A comparison with the K-horizon profile, a prominent seismic reflector in the Larderello area, was then performed. It was found that the K-horizon approximately corresponds with the pluton roof and with the current location of the brittle-ductile transition.  相似文献   


17.
张进江  杨雄英  戚国伟  王德朝 《岩石学报》2011,27(12):3535-3544
本文报道吉隆北喜马拉雅地区马拉山穹窿核部浅色花岗岩的锆石SHRIMP U-Pb和白云母激光40Ar/39 Ar年代学研究.花岗岩U-Pb年龄显示,穹窿核部浅色花岗岩岩浆活动(深熔及侵位)发生于～30Ma至～17Ma,其中最年轻的U-Pb年龄(17Ma)以及花岗岩白云母40Ar/39Ar年龄(17～15Ma)指示了马拉山穹窿的最后岩浆侵位时间及可能的穹窿冷却事件.已有研究表明,北喜马拉雅片麻岩穹窿带(NHGD)与藏南拆离系(STDS)中浅色花岗岩具有相似的最早侵位年龄,即～35 Ma,而STDS下盘U-Pb年龄老于35Ma的浅色花岗岩为增厚地壳重熔成因,表明北喜马拉雅在 ～35Ma地壳构造体制由挤压转为伸展,并暗示在始新世-渐新世转换期可能存在一更广泛意义的地质事件.～35 Ma以前增厚导致中下地壳部分熔融,形成中下地壳渠道流,渠道流活动触发增厚造山楔的垮塌,形成STDS.STDS的伸展减薄引发更大规模浅色花岗岩侵位,花岗岩底辟作用形成了NHGD,本文最年轻U-Pb年龄及40Ar/39Ar年龄(17～15Ma)即代表马拉山的底辟与穹窿作用,之后的构造体制由东西向伸展所取代(始于～13Ma).  相似文献   

18.
Garnet granulite facies mid‐to lower crust in Fiordland, New Zealand, provides evidence for pulsed intrusion and deformation occurring in the mid‐to lower crust of magmatic arcs. 238U‐206Pb zircon ages constrain emplacement of the ～595 km2 Malaspina Pluton to 116–114 Ma. Nine Sm‐Nd garnet ages (multi‐point garnet‐rock isochrons) ranging from 115.6 ± 2.6 to 110.6 ± 2.0 Ma indicate that garnet granulite facies metamorphism was synchronous or near synchronous throughout the pluton. Hence, partial melting and garnet granulite facies metamorphism lasted <5 Ma and began within 5 Ma of pluton emplacement. Garnet granulite facies L‐S tectonites in the eastern part of the Malaspina Pluton record the onset of extensional strain and arc collapse. An Sm‐Nd garnet age and thermobarometric results for these rocks directly below the amphibolite facies Doubtful Sound shear zone provide the oldest known age for extension in Fiordland at ≥112.8 ± 2.2 Ma at ～920 °C and 14–15 kbar. Narrow high Ca rims in garnet from some of these suprasolidus rocks could reflect a ≤ 1.5 kbar pressure increase, but may be largely a result of temperature decrease based on the Ca content of garnet predicted from pseudosections. At peak metamorphic conditions >900 °C, garnet contained ～4000 ppm Ti; subsequently, rutile inclusions grew during declining temperature with limited pressure change. Garnet granulite metamorphism of the Malaspina Pluton is c. 10 Ma younger than similar metamorphism of the Pembroke Granulite in northern Fiordland; therefore, high‐P metamorphism and partial melting must have been diachronous for this >3000 km² area of mid‐to‐lower crust. Thus, two or more pulses of intrusion shortly followed by garnet granulite metamorphism and extensional strain occurred from north to south along the axis of the lower crustal root of the Cretaceous Gondwana arc.  相似文献   

19.
The Gaojiabang W-Mo mineralized granodiorite porphyry occurs as a “satellite” intrusion on the northern margin of the Qingyang-Jiuhua pluton in southern Anhui Province, South China. The geology, mineral and whole-rock geochemistry of the granodiorite porphyry is I-type and formed from a reduced melt. The Gaojiabang mineralized granodiorite porphyry was derived from the transition zone between the lower crust and upper mantle, and underwent high-degree fractional crystallization during emplacement. There is no obvious genetic relationship between the granodiorite porphyry and the granodiorite pluton of the Qingyang-Jiuhua plutonic complex. The key characteristics of the W-Mo mineralized Gaojiabang granodiorite porphyry include: 1) small volume (<0.5 km3), 2) an abundance of hornblende (>5 vol%), 3) low ∑REE concentrations (145.50–159.46 ppm) accompanying weak negative Eu anomalies (0.85–0.94), 4) high differentiation-indices degree and water contents, and 5) low oxygen fugacity. These criteria can be used to identify potential W-Mo mineralized intrusions in southern Anhui Province, South China.  相似文献   

20.
The Fenghuangshan Pluton is located in the Tongling polymineral-cluster district in the middle-lower section of the Yangtze metallogenic belt. In tectonic terms, it is in the middle of the Guichi-Fanchang faulted fold bundle of the lower Yangtze Platform fold belt between the Dabie Orogenic Belt and the Jiangnan Massif. Analyses of the structural deformation characteristics of both the contact zone and the interior of the pluton are used to explain its emplacement mechanism. The foliation and lineation of the pluton, consisting of the oriented distribution of dark minerals and xenoliths, mainly concentrate along the margin of the pluton. Toward the center of the pluton, the foliation structure becomes weak, showing intense compression formation at the margin, and reflecting the conformable intrusion of the pluton. The relatively gentle lineation is evidence of a rotatory emplacement mechanism. Relatively steep marginal foliation reflects compression expanding. Affected by the thermal power of the pluton,  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号