共查询到20条相似文献，搜索用时 31 毫秒
1.
Alluvial fans and fan deltas can, in principle, have exactly the same upstream conditions, but fan deltas by definition have ponding water at their downstream boundary. This ponding creates effects on the autogenic behaviour of fan deltas, such as backwater adaptation, mouth bars and backward sedimentation, whereas alluvial fans may lack these effects. Hence the present authors hypothesize that morphodynamics on alluvial fans are determined primarily by upstream boundary conditions, whereas morphodynamics on fan deltas are determined by both the upstream and the downstream boundary condition and changes therein. To isolate the effects of the upstream and downstream boundaries, five new alluvial fan experiments are compared with the details of three fan deltas published earlier that were formed under very similar and simple conditions. Similar to the fan deltas, the alluvial fans build up by sheet flow, whilst quasi‐regular periods of incision cause temporary channelized flow. Incision is followed by channel backfilling, after which the fan returns to sheet flow. The channelization and backfilling in alluvial fans is markedly less pronounced and more prone to autogenic disturbance than in fan deltas. The difference is caused by morphodynamics at the downstream boundary. In a fan delta, the flow expansion of the channel causes deposition of all the sediment, which forms a mouth bar and causes strong backfilling. In an alluvial fan, on the other hand, the slope break at the fan perimeter causes some deposition, but transport is not reduced to zero. Consequently, the backfilling in alluvial fans is less pronounced than in fan deltas. Other published experiments support this trend: removal of the mouth bar by a river leads to permanent channelization, whilst pronounced mouth‐bar formation in highly channelized deltas promotes backward sedimentation. The experimental results for this study predict that, when alluvial fans prograde into lakes or deep rivers, they transition to fan deltas with increasingly deeper channels and thicker backfill deposits. 相似文献
2.
Study of a Holocene fan delta in Adventfjorden, Spitsbergen, provides new insight into the nature of high‐arctic coastal sedimentation and deglaciation dynamics. The fjord‐side, gravelly Gilbert‐type fan delta began to form at the local marine limit c. 10 ka BP, supplied seasonally with sediment by meltwater from a cirque glacier left behind by the retreating Late Weichselian ice sheet. Relative sea level had fallen by 63 m, and the fan delta reached a radius of c. 1 km by 6 ka BP, when the relic glacier eventually melted down and fluvial activity declined. A strong influence of marine processes is recorded by the fan‐delta foreset facies, overlain by alluvium. Supplied with sediment by longshore drift, the fan‐delta front continued to advance at a lower rate, while relative sea level fell further by 5 m and ceased to fall around 5·4 ka BP. The following transgression was countered by longshore sediment supply until 4·7 ka BP, when the delta‐front beach aggraded and a spit platform began to climb onto the delta plain, recording a relative sea‐level rise of 4 m. The subsequent regression was initially non‐depositional, with the relative sea level falling by > 4 m in 200 years, outpacing fluvial supply, and the re‐emerging fan delta being swept by longshore currents. A regressive beach began to form c. 4·3 ka BP, while relative sea level gradually reached its present‐day position. The feeder braided stream was wandering across the delta plain during this time, but incised once the fan‐delta shoreline began to retreat by wave erosion and turned into a receding modern escarpment. The stream has since been adjusting its profile by gradually eroding the pre‐existing alluvium and distributing the coarse sediment supplied from catchment slopes by debrisflows and snow avalanches. Modern snowflows have also spread debris onto the abandoned fan surface. The erosional retreat of the fan delta has been accompanied by lateral shoreline accretion on both its sides. The study has important regional implications and demonstrates that Holocene fan deltas can provide a valuable record of the deglaciation history in high‐arctic terrains, where glacial deposits are scarcely preserved on land. 相似文献
3.
准噶尔盆地玛湖凹陷西斜坡下三叠统百口泉组内,发育了世界上罕见的、最典型的大型扇三角洲。在岩芯沉积特征观察、岩石粒度与成分分析等基础上,结合测、钻井资料等,对该大型湖相扇三角洲的沉积特征与演化规律开展系统的研究,并建立了沉积与演化模式。结果表明:百口泉组沉积时期,玛西斜坡区发育了两个大型扇三角洲,其延伸距离可大于40 km;该扇三角洲相包含扇三角洲平原、扇三角洲前缘及前扇三角洲3个亚相,以及泥石流、扇面河道、碎屑流、水下分流河道、河口砂坝及前扇三角洲泥等9个微相;该扇三角洲富含砾质,总体上以重力流沉积（泥石流和碎屑流微相）的砾岩与牵引流沉积（扇面河道和水下分流河道微相）的砾岩、含砾砂岩交替叠置为特点;前缘环境的水下分流河道延伸近二十千米,且一直保持以砾质为主;纵向上,自百一段到百三段,该扇三角洲表现为典型的连续退积式,沉积演化规律十分清楚,其中,百一段沉积时期,该扇三角洲以扇三角洲平原占据主导地位,至百三段沉积时期,该扇三角洲则演化为以扇三角洲前缘为主,得益于水下分流河道的长距离延伸,使其依然保持为大型的扇三角洲。 相似文献
4.
中国东部箕状断陷湖盆扇三角洲与辫状河三角洲对比研究 总被引：1，自引：0，他引：1
中国东部箕状断陷湖盆短轴方向,常常发育扇三角洲和辫状河三角洲,二者均可形成良好的油气储集体,但在岩芯以及地球物理资料的识别上常常容易混淆。通过对它们沉积特征、地球物理资料特征、含油气性和控制因素的对比研究和分析认为:扇三角洲是陡坡带冲积扇直接入湖形成,地震反射特征为楔形前积,沉积物成分成熟度和结构成熟度均低于辫状河三角洲,沉积特征反映重力流和牵引流双重作用;辫状河三角洲是缓坡带辫状河入湖形成的三角洲,向湖盆方向推进较远,地震反射特征为叠瓦前积,沉积特征反映牵引流作用。扇三角洲易形成构造-岩性油气藏和岩性油气藏,有利相带为扇三角洲前缘水下分流河道、席状砂以及前扇三角洲容易发育的滑塌浊积扇;辫状河三角洲易形成地层-岩性油气藏和岩性油气藏,有利相带为辫状河三角洲平原辫状分流河道,辫状河三角洲前缘水下分流河道、河口坝、席状砂以及半深湖中的浊积岩体。古气候变化、构造-古地貌以及湖平面变化速率三者共同作用于扇三角洲和辫状河三角洲的沉积特征,其中构造-古地貌是主控因素。结合二者沉积特征差异,建立了中国东部箕状断陷湖盆扇三角洲和辫状河三角洲沉积模式图,以期能对相似构造背景下扇三角洲和辫状河三角洲的分析与研究提供一定的指导作用。 相似文献
5.
扇三角洲是一类非常重要的油气聚集场所,准确可靠的扇三角洲沉积模式,对储集层预测具有重要意义。准噶尔盆地玛北地区三叠系百口泉组发育一套扇三角洲沉积体系,虽然前人做了大量的研究,但在沉积模式方面仍存在一些争议。通过现代沉积考察、前人水槽模拟实验、研究区测井、岩心等资料综合分析发现: (1)玛北地区百口泉组扇三角洲平原发育3类微相,即辫状河道微相、砾质漫滩微相、水上朵前泥微相,同时可见泥石流沉积;玛北地区百口泉组扇三角洲前缘发育2种微相,即砾质浅滩微相、砂质浅滩微相,同时可见碎屑流沉积;(2)扇三角洲平原河道与河道间均为砂砾岩,河道砂砾岩的分选性明显好于河道间砂砾岩;(3)扇三角洲前缘不发育水下分流河道,扇三角洲前缘的砂砾岩主体是由扇三角洲平原片流入湖形成的,呈席状。 相似文献
6.
Shelf‐edge deltas record the potential magnitude of sediment delivery from shallow water shelf into deep water slope and basin floor and, if un‐incised, represent the main increment of shelf‐margin growth into the basin, for that period. The three‐dimensional complexity of shelf‐edge delta systems and along‐strike variability at the shelf edge in particular, remains understudied. The Permian–Triassic Kookfontein Formation of the Tanqua Karoo Basin, South Africa, offers extensive three‐dimensional exposure (>100 km2) and therefore a unique opportunity to evaluate shelf‐edge strata from an outcrop perspective. Analysis of stratal geometry and facies distribution from 52 measured and correlated stratigraphic sections show the following: (i) In outer‐shelf areas, parasequences are characterized by undeformed, river‐dominated, storm‐wave influenced delta mouth‐bar sandstones interbedded with packages showing evidence of syn‐depositional deformation. The amount and intensity of soft‐sediment deformation increases significantly towards the shelf edge where slump units and debris flows sourced from collapsed mouth‐bar packages transport material down slope. (ii) On the upper slope, mouth‐bar and delta‐front sandstones pinch out within 2 km of the shelf break and most slump and debris flow units pinch out within 4 km of the shelf break. (iii) Further down the slope, parasequences consist of finer‐grained turbidites, characterized by interbedded, thin tabular siltstones and sandstones. The results highlight that river‐dominated, shelf‐edge deltas transport large volumes of sand to the upper slope, even when major shelf‐edge incisions are absent. In this case, transport to the upper slope through slumping, debris flows and un‐channellized low density turbidites is distributed evenly along strike. 相似文献
7.
Tjalling de Haas Wilco van den Berg Lisanne Braat Maarten G. Kleinhans 《Sedimentology》2016,63(6):1596-1619
Alluvial fans develop their semi‐conical shape by quasi‐cyclic avulsions of their geomorphologically active sector from a fixed fan apex. On debris‐flow fans, these quasi‐cyclic avulsions are poorly understood, partly because physical scale experiments on the formation of fans have been limited largely to turbidite and fluvial fans and deltas. In this study, debris‐flow fans were experimentally created under constant extrinsic forcing, and autogenic sequences of backfilling, avulsion and channelization were observed. Backfilling, avulsion and channelization were gradual processes that required multiple successive debris‐flow events. Debris flows avulsed along preferential flow paths given by the balance between steepest descent and flow inertia. In the channelization phase, debris flows became progressively longer and narrower because momentum increasingly focused on the flow front as flow narrowed, resulting in longer run‐out and deeper channels. Backfilling commenced when debris flows reached their maximum possible length and channel depth, as defined by channel slope and debris‐flow volume and composition, after which they progressively shortened and widened until the entire channel was filled and avulsion was initiated. The terminus of deposition moved upstream because the frontal lobe deposits of previous debris flows created a low‐gradient zone forcing deposition. Consequently, the next debris flow was shorter which led to more in‐channel sedimentation, causing more overbank flow in the next debris flow and resulting in reduced momentum to the flow front and shorter runout. This topographic feedback is similar to the interaction between flow and mouth bars forcing backfilling and transitions from channelized to sheet flow in turbidite and fluvial fans and deltas. Debris‐flow avulsion cycles are governed by the same large‐scale topographic compensation that drives avulsion cycles on fluvial and turbidite fans, although the detailed processes are unique to debris‐flow fans. This novel result provides a basis for modelling of debris‐flow fans with applications in hazards and stratigraphy. 相似文献
8.
Autogenic cycles of channelization, terminal deposit formation, channel backfilling and channel abandonment have been observed in the formation of fans and deltas. In subcritical flow, these terminal deposits are characterized as mouth bars that lead to flow bifurcation, backwater and eventual channel backfilling. Similar, although less well characterized, cycles also take place on supercritical subaerial and submarine fans. This study investigates the hydraulics and morphodynamics of autogenic incision and backfilling cycles associated with supercritical distributive channel flow in alluvial fans. The research questions of the study are: (i) how are supercritical autogenic cycles on alluvial fans different from the subcritical cycles; (ii) what are the hydraulic and sediment transport characteristics at the various stages of autogenic feedback cycles; and (iii) what role do the cycles play in the overall fan evolution? These questions are investigated in the laboratory, and emphasis is placed on measuring the hydraulic and topographic evolution of the systems during the cycles. The cycles arise quasi‐periodically under constant water and sediment discharge. Periods of sheet‐like flow are competent to move sediment () but not competent enough to carry the full imposed load. The net result is preferential deposition near the inlet, resulting in fan steepening and an increase in flow competency with time. At a sediment supply to capacity ratio of , the sheet‐like flow is unstable to small erosional events near the inlet, resulting in the collapse of the distributed flow to a strong channelized state. During channelization, a graded () supercritical (Fr > 1) channel develops and transports eroded and fed sediment up to and through the fan front – extending the fan, initiating a lobe shaped deposit and reducing the local slope. The slopes defined by a sheet‐like flow with and channelized flow with set the maximum and minimum slopes on the fan, respectively. Once formed, graded channels act as bypass conduits linking the inlet with the terminal deposit. On average, deposits are up to six channel depths in thickness and have volumes approximately five times that of the excavated channel. The main distinctive characteristics of the supercritical cycles relate to how the flow interacts with the terminal deposit. At the channel to deposit transition, the flow undergoes a weak hydraulic jump, resulting in rapid sedimentation, dechannelization and lateral expansion of the flow, and deposition of any remaining sediment on top of the channel fill and floodplain. This process often caps the channel as the deposit propagates up channel erasing memory of the excavated channel. 相似文献
9.
The Mackenzie Delta: sedimentary processes and facies of a high-latitude, fine-grained delta 总被引：2，自引：0，他引：2
Philip R. Hill C. Peter Lewis Simon Desmarais Vassen Kauppaymuthoo & Hasna Rais 《Sedimentology》2001,48(5):1047-1078
The Mackenzie Delta is a large fine‐grained delta deposited in a cold arctic setting. The delta has been constructed upon a flooding surface developed on a previous shelf‐phase delta. There are three principal depositional zones: the subaerial delta plain, the distributary channel mouth region and the subaqeous delta. The subaerial delta plain is characterized by an anastomosing system of high‐sinuosity channels and extensive thermokarst lake development. This region is greatly influenced by the annual cycle of seasonal processes including winter freezing of sediments and channels, ice‐jamming and flooding in the early spring and declining river stage during the summer and autumn. Deposition occurs on channel levees and in thermokarst lakes during flood events and is commonly rhythmic in nature with discrete annual beds being distinguishable. In the channel mouth environment, deposition is dominated by landward accretion and aggradation of mouth bars during river‐ and storm surge‐induced flood events. The subaqeous delta is characterized by a shallow water platform and a gentle offshore slope. Sediment bypassing of the shallow‐water platform is efficient as a result of the presence of incised submarine channels and the predominance of suspension transport of fine‐grained sediments. Facies of the shallow platform include silty sand with climbing ripple lamination. Offshore facies are dominated by seaward‐fining fine sand to silt tempestites. Sea‐ice scouring and sediment deformation are common beyond 10 m water depth where bioturbated muds are the predominant facies. The low angle profile of the shallow‐water platform is interpreted to be the combined response of a fine‐grained delta to (1) storm sediment dispersal; (2) autoretreat as a result of the increasing subaerial and subaqeous area of deposition as the delta progrades out of its glacial valley; (3) limited water depth above the underlying flooding surface; and (4) efficient nearshore bypassing of sediment through subice channels at the peak of spring discharge. Several indicators of the cold climate can be used as criteria for the interpretation of ancient successions, including thermokarst lake development, submarine channel scours, freeze–thaw deformation and ice‐scour deformation structures. Permafrost inhibits compaction subsidence and, together with the shallow‐water setting, also limits autocyclic lobe switching. The cold climate can thus influence stratal architecture by favouring the development of regional‐scale clinoform sets rather than multiple, smaller scale lobes separated by autocyclic flooding surfaces. 相似文献
10.
扇三角洲为陆相沉积盆地中的一个重要沉积体系,多数具有良好的油气储集能力。通常情况下,盆地中发育的扇三角洲具有相近的物性,扇三角洲前缘分流河道储层物性好,席状砂物性较差。然而,达尔其油田相邻的2个扇三角洲的物性出现了较大差异,达尔其西扇三角洲出现了分流河道物性差异与相控储层理论相悖的现象。利用偏光显微镜镜下薄片观察、岩芯物性分析与测井等资料,研究了该区储层岩石的孔隙类型以及成岩过程中压实和胶结作用对储层物性的影响,分析2个相邻扇三角洲储层物性差异及达尔其西扇三角洲河道物性差的原因,认为干旱气候和地壳抬升作用、盐湖沉积阶段和盐类沉积时间差异是形成2个扇三角洲物性差异的关键因素。研究成果为解释达尔其油田2个扇三角洲储层物性剧烈变化和差异提供了重要依据。 相似文献
11.
扇三角洲沉积体系及其与油气聚集关系 总被引：23，自引：2，他引：21
扇三角洲沉积体系是断陷盆地中极为发育的一种沉积体系,主要由扇三角洲平原组合、扇三角洲前缘组合和前三角洲沉积构成,可识别出9种成因相。受沉积物供给速率、可容空间增长速率及盆缘断裂产状等因素控制可划分出退积型、加积型、前积型、陡坡型和缓坡型5种扇三角洲类型。位于扇三角洲平原的辫状分流河道砂体及其位于扇三角洲前缘的与之有成因联系的水下分流河口坝、洪水型重力流砂体等物性好,可以构成优质储层。含油性勘探成果亦证实各主力油层段平面上主要分布于扇三角洲前缘及分流间湾区,小部分位于扇三角洲平原区。受埋藏深度和成岩场的影响,不同地区、不同层位主力油层段的物性与岩性相关性各异。因此,应用沉积体系分布与油气聚集规律挖掘剩余油层及进行远景区预测是有效的与可行的。 相似文献
12.
Duncan M. Fitzgerald Mark Kulp† Shea Penland† James Flocks‡ Jack Kindinger‡ 《Sedimentology》2004,51(6):1157-1178
The Barataria barrier coast formed between two major distributaries of the Mississippi River delta: the Plaquemines deltaic headland to the east and the Lafourche deltaic headland to the west. Rapid relative sea‐level rise (1·03 cm year?1) and other erosional processes within Barataria Bay have led to substantial increases in the area of open water (> 775 km2 since 1956) and the attendant bay tidal prism. Historically, the increase in tidal discharge at inlets has produced larger channel cross‐sections and prograding ebb‐tidal deltas. For example, the ebb delta at Barataria Pass has built seaward > 2·2 km since the 1880s. Shoreline erosion and an increasing bay tidal prism also facilitated the formation of new inlets. Four major lithofacies characterize the Barataria coast ebb‐tidal deltas and associated sedimentary environments. These include a proximal delta facies composed of massive to laminated, fine grey‐brown to pale yellow sand and a distal delta facies consisting of thinly laminated, grey to pale yellow sand and silty sand with mud layers. The higher energy proximal delta deposits contain a greater percentage of sand (75–100%) compared with the distal delta sediments (60–80%). Associated sedimentary units include a nearshore facies consisting of horizontally laminated, fine to very fine grey sand with mud layers and an offshore facies that is composed of grey to dark grey, laminated sandy silt to silty clay. All facies coarsen upwards except the offshore facies, which fines upwards. An evolutionary model is presented for the stratigraphic development of the ebb‐tidal deltas in a regime of increasing tidal energy resulting from coastal land loss and tidal prism growth. Ebb‐tidal delta facies prograde over nearshore sediments, which interfinger with offshore facies. The seaward decrease in tidal current velocity of the ebb discharge produces a gradational contact between proximal and distal tidal delta facies. As the tidal discharge increases and the inlet grows in dimensions, the proximal and distal tidal delta facies prograde seawards. Owing to the relatively low gradient of the inner continental shelf, the ebb‐tidal delta lithosome is presently no more than 5 m thick and is generally only 2–3 m in thickness. The ebb delta sediment is sourced from deepening of the inlet and the associated channels and from the longshore sediment transport system. The final stage in the model envisages erosion and segmentation of the barrier chain, leading to a decrease in tidal discharge through the former major inlets. This process ultimately results in fine‐grained sedimentation seaward of the inlets and the encasement of the ebb‐tidal delta lithosome in mud. The ebb‐tidal deltas along the Barataria coast are distinguished from most other ebb deltas along sand‐rich coasts by their muddy content and lack of large‐scale stratification produced by channel cut‐and‐fills and bar migration. 相似文献
13.
Quaternary sedimentology of the Rose Creek fan delta, Walker Lake, Nevada, USA, and implications to fan-delta facies models 总被引：1，自引：0，他引：1
The 3·2 km long Rose Creek fan delta of west‐central Nevada is prograding from an active rift margin into the 32 m deep Walker Lake. A case study of the forms, processes and facies of this fan delta reveals that the proximal and medial zones mainly are of sub‐aerial origin, and the distal zone is of lacustrine origin. Pebbly to bouldery rock‐avalanche mounds >100 m thick (Facies A) and muddy to bouldery debris flow levées 0·5 to 2·0 m thick (Facies B) dominate the proximal zone, whereas mostly matrix‐supported cobbly pebbly debris flow lobes 0·1 to 1·0 m thick (Facies C) typify the medial zone. Surficial pebble lags and gully fills (Facies D) are widespread in both zones but, in exposures, comprise only partings or lenticles between debris flow units. The distal fan delta mainly consists of lakeshore to lake‐bottom tracts formed by extensive wave reworking of debris flow facies. Nearshore deposits include erosional cobbly boulder lag beaches (Facies E), pebbly constructional beaches attached at headcuts or on barrier spits (Facies F), pebbly upper shoreface (Facies G) and sandy lower shoreface (Facies H) tracts positioned lakeward of the beach, and pebbly landward‐dipping foresets (Facies I) and backshore‐pond sand and mud (Facies J) present landward of the spits. Erosional lag beaches fringe the windward north side of the fan‐delta front, attached constructional beaches characterize the central zone, and southward‐elongating barrier spits typify the leeward south side, extending from the zone of greatest projection of the fan delta into the lake. Shoreline facies asymmetry results from largely unidirectional longshore drift caused by high fetch to the north and minimal fetch to the south, combined with the arcuate shape of the fan‐delta front. The spits overlie a platform deposited below common wave base consisting of south‐east‐trending cones of pebbly Gilbert foresets (Facies K) and sandy toesets (Facies L). Typically slumped silt and mud (Facies M) fringe both this platform and lower shoreface sand in deeper water. This case demonstrates facies types and patterns that are inconsistent with the widely promoted fan‐delta facies model having a front consisting of an apron of radially directed Gilbert foresets deposited where sub‐aerial flows enter the lake. The Rose Creek fan‐delta front instead features a sharp contact between sub‐aerial and lakeshore facies formed where waves erode, sort and redistribute heterogeneous debris flow sediment into the various shallow‐to‐deep lake facies. Gilbert foresets are present only in the lee of the fan delta where sediment moving by longshore drift reaches the brink of the spit front. This facies scenario results from the infrequency of fan‐building events versus nearly constant wind‐induced waves, a scenario that, in contrast to the popular Gilbert model, probably is the norm for fan deltas. The level of Walker Lake, and thus the position of wave reworking on the Rose Creek fan delta, fluctuated over a range of ～157 m during the last 18 kyr, producing complex interfingering between sub‐aerial and lakeshore facies across a 1700 m wide radial belt, typifying a wave‐modified, freestand lacustrine fan delta. 相似文献
14.
LUIS A. BUATOIS NUBIA SANTIAGO MEYLIN HERRERA PIRET PLINK‐BJÖRKLUND RON STEEL MARÍA ESPIN KAOLU PARRA 《Sedimentology》2012,59(5):1568-1612
Analysis of Neogene cores from the Eastern Venezuela Basin along 65 km of a west–east trending shoreline allows characterization of the sedimentological and ichnological signatures of wave, river and tidal processes. The area displays deltas prograding northward from the Guyana Shield. Twenty‐three facies are defined and grouped into four categories (wave‐influenced, river‐influenced, tide‐influenced and basinal). Wave‐dominated deltaic deposits occur mostly in the Tácata Field. The delta plain was characterized by tide‐influenced distributary channels separated by interdistributary bays. Fluvial discharge in the delta front and prodelta was repeatedly interrupted by storm‐wave reworking and suspended sediment fallout. Delta‐front and prodelta deposits contain some ichnotaxa that typically do not occur in brackish water (for example, Chondrites and Phycosiphon). Amalgamated storm deposits are unburrowed or contain vertical Ophiomorpha. Lateral (especially on the updrift side) to the river mouths, waves caused nearly continuous accretion of the associated strandplains. These deposits are the most intensely bioturbated, and are dominated by the estenohaline echinoid‐generated ichnogenus Scolicia. River‐dominated deltaic deposits are present in the Santa Bárbara, Mulata, Carito and El Furrial Fields. Low‐sinuosity rivers characterized the alluvial plain, whereas the subaerial delta plain was occupied by higher‐sinuosity rivers. The subaqueous delta plain includes distributary channels and tide‐influenced interdistributary bays. Further seaward, successions are characterized by terminal distributary‐channel and distributary mouth‐bar deposits, as well as by delta‐front and prodelta deposits showing evidence of sediment gravity‐flow and fluid‐mud emplacement. Delta‐front and prodelta deposits are unbioturbated to sparsely bioturbated, suggesting extreme stress, mostly as a result of high fluvial discharge and generation of sediment gravity flows. Tidal influence is restricted to interdistributary bays, lagoons and some distributary channels. From an ichnological perspective, and in order of decreasing stress levels, four main depositional settings are identified: river‐dominated deltas, tide‐influenced delta plains, wave‐dominated deltas and wave‐dominated strandplain–offshore complexes. 相似文献
15.
The northern Gioia Basin of the south‐east Tyrrhenian Sea is a slope basin, ～ 20 km wide and ～ 50 km long, with a bathymetry of ≤ 1300 m, bounded by the Calabro‐Sicilian landmass and the Aeolian Island Arc. Coarse sediment is supplied from the Calabrian margin, where the shelf is very narrow to non‐existent, whereas the wider shelf on the Sicilian margin prevents supply by storing river‐fed sediments. The basin is dominated by the Gioia–Mesima canyon/channel system paralleled by a tongue‐shaped depositional lobe. Multibeam bathymetric surveys, sea floor reflectivity data and airgun seismic profiles reveal the recent evolution of the submarine system. Slope canyons and basin‐floor levéed channels formed where major rivers built deltas at the shelfless Calabrian margin and strong hyperpycnal flows predominated. The channels are a few hundred metres wide and a few tens of metres deep, with a downslope change from a straight to meandering pattern where the slope gradient decreases from 3·2% to 1·7%. The Mesima Channel has its lower segment abandoned because of avulsion and crevasse‐splay formation at an upslope bend. The adjacent Gioia Channel has had its upper segment straightened and lower segment entrenched because of erosional deepening of the Stromboli Valley into which it debouches and which acts as the local base level. Overbank features include levées, coalescent splays and ‘yazoo’ channels; their nature and surface characteristics depend upon the magnitude and sediment grain‐size of spill‐over flows. On an adjoining narrow shelf sliver of the Calabrian margin, in contrast, the coalescing plumes of sediment suspension supplied by an array of smaller coastal streams were apparently spilling over the shelf edge, scouring a funnel‐shaped bypass depression with chutes and forming an elongate, non‐channellized depositional lobe at the slope base. The study demonstrates the impact of sediment source type, shelf width, basin‐floor gradient and base‐level change on the style of deep‐water sedimentation. 相似文献
16.
RICARDO NÉSTOR MELCHOR 《Sedimentology》2007,54(6):1417-1446
Well‐exposed Triassic rift strata from the Ischigualasto–Villa Unión Basin (NW Argentina) include a 80 to ca 515 m thick lacustrine‐dominated package that can be correlated across a half‐graben using key stratigraphic surfaces (sequence boundaries, lacustrine flooding surfaces and forced regressive surfaces). The characteristics of the synrift lacustrine fill in different parts of the half‐graben have been examined and the mechanisms controlling sedimentation inferred. A variety of sedimentary environments are recognized including; volcaniclastic floodplain, mildly saline lake and playa lake, offshore lacustrine, delta front to fluvial‐dominated and wave‐dominated deltas, distributary and fluvial channel, and interdistributary bay. The succession can be divided into four stratigraphic sequences (SS1 to SS4), the oldest of which (SS1) contains volcaniclastic, fluvial and saline lake deposits; it is thickest close to the western border fault zone, reflecting more rapid subsidence here. Accommodation exceeded sediment and water input during SS1. The second and third sequences (SS2 and SS3) mark the onset of widespread lacustrine sedimentation, reflecting a balance between accommodation creation and water and sediment fluxes. Sequences SS2 and SS3 are represented by offshore meromictic lacustrine and deltaic deposits, the latter mostly sourced from the flexural and southern axial margins of the half‐graben. The presence of stacked parasequences bound by lacustrine flooding surfaces is related to climatically induced lake‐level fluctuations superimposed on variable rates of subsidence on the controlling rift border fault zone. The youngest sequence (SS4) is represented by the deposits of littoral lacustrine and shallow shelf deltas distinguished by a change in lithofacies, palaeocurrents and sandstone composition, suggesting a switch in sediment supply to the footwall margin to the NW. The change in the sediment source is related to reduced footwall uplift, the possible presence of a relay ramp and/or supply from a captured antecedent drainage network. During SS4, the rate of creation of accommodation was exceeded by the sediment and water discharge. The stratigraphic evolution of lacustrine strata in the half‐graben was mainly controlled by tectonic processes, including subsidence rate and the growth and evolution of the border fault zone, but changing climate (inducing changes in water balance and lake level) and autocyclic processes (delta lobe switching) were also important. 相似文献
17.
Interpreting complex fluvial channel and barform architecture: Carboniferous Central Pennine Province,northern England 
下载免费PDF全文
下载免费PDF全文 The Bashkirian Lower Brimham Grit of North Yorkshire, England, is a fluvio‐deltaic sandstone succession that crops out as a complex series of pinnacles, the three‐dimensional arrangement of which allows high‐resolution architectural analysis of genetically‐related lithofacies assemblages. Combined analysis of sedimentary graphic log profiles, architectural panels and palaeocurrent data have enabled three‐dimensional geometrical relationships to be established for a suite of architectural elements so as to develop a comprehensive depositional model. Small‐scale observations of facies have been related to larger‐scale architectural elements to facilitate interpretation of the palaeoenvironment of deposition to a level of detail that has rarely been attempted previously, thereby allowing interpretation of formative processes. Detailed architectural panels form the basis of a semi‐quantitative technique for recording the variety and complexity of the sedimentary lithofacies present, their association within recognizable architectural elements and, thus, the inferred spatio‐temporal relationship of neighbouring elements. Fluvial channel‐fill elements bounded by erosional surfaces are characterized internally by a hierarchy of sets and cosets with subtly varying compositions, textures and structures. Simple, cross‐bedded sets represent in‐channel migration of isolated mesoforms (dunes); cosets of both trough and planar‐tabular cross‐bedded facies represent lateral‐accreting and downstream‐accreting macroforms (bars) characterized by highly variable, yet predictable, patterns of palaeocurrent indicators. Relationships between sandstone‐dominated strata bounded by third‐order and fifth‐order surfaces, which represent in‐channel bar deposits and incised channel bases, respectively, chronicle the origin of the preserved succession in response to autocyclic barform development and abandonment, major episodes of incision probably influenced by episodic tectonic subsidence, differential tilting and fluvial incision associated with slip on the nearby North Craven Fault system. Overall, the succession represents the preserved product of an upper‐delta plain system that was traversed by a migratory fluvial braid‐belt system comprising a poorly‐confined network of fluvial channels developed between major sandy barforms that evolved via combined lateral‐accretion and downstream‐accretion. 相似文献
18.
Hueneme and Dume submarine fans in Santa Monica Basin consist of sandy channel and muddy levee facies on the upper fan, lenticular sand sheets on the middle fan, and thinly bedded turbidite and hemipelagic facies elsewhere. Fifteen widely correlatable key seismic reflections in high-resolution airgun and deep-towed boomer profiles subdivide the fan and basin deposits into time-slices that show different thickness and seismic-facies distributions, inferred to result from changes in Quaternary sea level and sediment supply. At times of low sea level, highly efficient turbidity currents generated by hyperpycnal flows or sediment failures at river deltas carry sand well out onto the middle-fan area. Thick, muddy flows formed rapidly prograding high levees mainly on the western (right-hand) side of three valleys that fed Hueneme fan at different times; the most recently active of the lowstand fan valleys, Hueneme fan valley, now heads in Hueneme Canyon. At times of high sea level, fans receive sand from submarine canyons that intercept littoral-drift cells and mixed sediment from earthquake-triggered slumps. Turbidity currents are confined to ‘underfit’ talweg channels in fan valleys and to steep, small, basin-margin fans like Dume fan. Mud is effectively separated from sand at high sea level and moves basinward across the shelf in plumes and in storm-generated lutite flows, contributing to a basin-floor blanket that is locally thicker than contemporary fan deposits and that onlaps older fans at the basin margin. The infilling of Santa Monica Basin has involved both fan and basin-floor aggradation accompanied by landward and basinward facies shifts. Progradation was restricted to the downslope growth of high muddy levees and the periodic basinward advance of the toe of the steeper and sandier Dume fan. Although the region is tectonically active, major sedimentation changes can be related to eustatic sea-level changes. The primary controls on facies shifts and fan growth appear to be an interplay of texture of source sediment, the efficiency with which turbidity currents transport sand, and the effects of delta distributary switching, all of which reflect sea-level changes. 相似文献
19.
库车坳陷中生界三种类型三角洲的比较研究 总被引：34，自引：3，他引：31
库车坳陷中生代呈北陡南缓的箕状,其内连续沉积了一套厚度巨大的冲积-湖泊碎屑沉积体。湖缘扇三角洲、辫状河三角洲及曲流河三角洲非常发育,它们的特征清楚、区别明显:（1） 扇三角洲为突发的、瞬时的灾变事件产生的重力流沉积与间灾变期正常牵引流沉积交替进行,并以重力流沉积占主导地位:其平原亚相类似于冲积扇沉积,河道砂体呈透镜状,厚度小、变化大。（2） 辫状河三角洲为正常的河流牵引流沉积,通常受到湍急洪水控制,为季节性沉积作用产物;平原亚相类似于辫状河沉积;河道沉积发育,砂体总体呈层状,内部由若干个下粗上细的河道砂岩透镜体相互叠置而成,交错层发育,尤以侧积交错层异常发育为特征,岩性以颗粒支撑的砂砾岩为主。（3） 曲流河三角洲为正常的河流牵引流沉积,沉积物输入量为相对连续的终年河流的产物,平原亚相类似于曲流河沉积:河道砂体呈层状,交错层发育,类型丰富。当然,这三种类型三角洲之间亦存在着密不可分的内在联系,不仅同一时期内可以并存,而且随着地质历史的演化可相互转化。 相似文献
20.
B. Peng Z. Jin J. Wang H. Jia X. Zhu T. Chang K. Yuan 《Russian Geology and Geophysics》2018,59(6):606-619
The sedimentology and sequence stratigraphy of a retrogradational fan-delta system within Lower Triassic in the Mabei area of Junggar Basin in northwestern China were investigated using seismic, well log, and core data, complemented by the modern deposition and a flume tank experiment. The Lower Triassic in the Mabei area is dominated by fan deltas, which are composed of fan-delta plain (including subaerial debris flow, braided channel, conglomerate overbank, and floodplain), fan-delta front (including conglomerate shoal and sandy shoal), and prodelta. The braided channels form during the low flood period. The conglomerate overbanks form during the flood period and occupy most part of the fan-delta plain. The conglomerate shoals and sandy shoals form by a sheet flow prograding into lakes and occur as a sheet. The braided channels, conglomerate shoals, and sandy shoals are easy to form high-porosity reservoirs. One long-term base level cycles (LSC1), three middle-term base level cycles (MSC1, MSC2, and MSC3), and fifteen short-term base level cycles are identified. MSC1 is dominated by the fan-delta plain; MSC2 is dominated by the fan-delta front; and MSC3 is dominated by the fan-delta front and prodelta. The stratigraphy shows a proximal-middle-distal trend demonstrating an overall retrogradation stacking pattern. The sequence architecture is controlled by an interplay between lake level changes and sediment supply. The quick rise in the lake level and the creation of accommodation outpacing the rate of sediment supply result in a retrogradational fan-delta syste. 相似文献