共查询到20条相似文献，搜索用时 578 毫秒
1.
2.
新疆拜城县波孜果尔A型花岗岩类矿物学特征及岩浆形成的温度条件 总被引：2，自引：0，他引：2
新疆拜城县波孜果尔A型花岗岩类为富含铌、钽、锆等有用元素的含矿岩体。通过偏光显微镜、电子探针(EPMA)化学成分分析、电子探针背散射(BSE)对波孜果尔A型花岗岩类的矿物学特征进行了研究,并对岩浆形成的温度条件与构造背景进行了讨论。结果表明,波孜果尔A型花岗岩类包括霓石钠闪石英碱性长石正长岩、霓石钠闪碱性长石花岗岩、黑云母碱性长石正长岩3种岩石类型。主要造岩矿物包括石英、钠长石、钾长石、霓石、钠铁闪石和铁叶云母。副矿物包括锆石、烧绿石、钍石、萤石、独居石、氟碳铈镧矿、磷钇矿等。岩浆平均温度832~839℃,形成于非造山的板内构造环境,且具高温、无水、低氧逸度的成岩特点。 相似文献
3.
金寨响洪甸碱性侵入岩体分布在大别造山带东北缘的北淮阳地区,侵位于上元古界青白口系佛子岭群中。主要岩石类型为正长岩(似斑状正长岩)、碱性正长岩和霞石正长岩。正长岩的主要矿物为碱性长石及少量黑云母、普通辉石、绿钙闪石;碱性正长岩包含钾长石、角闪石、辉石和少量黑云母;霞石正长岩主要由碱性长石、霞石及少量绿钙闪石、普通辉石、次透辉石等矿物组成。化学成分上均具有偏铝质、富碱、高钾、贫钛的特点。富集大离子亲石元素K、Rb、U、Nd和轻稀土元素La、Ce、Pr、Nd、Sm,亏损高场强元素Nb、Ta、P、Ti,轻、重稀土元素比值及La/Nb、Ba/Nb值较高,呈弱的负铕异常。根据高精度同位素年代学测试结果,响洪甸碱性侵入岩成岩期次分为2期:早期霞石正长岩,LA-ICP-MS锆石U-Pb年龄为(135.1±0.7)Ma;晚期正长岩,SHRIMP锆石U-Pb年龄为(125.0±1)Ma和碱性正长岩,颗粒锆石U-Pb年龄为122.3 Ma。主体岩石似斑状正长岩的Hf同位素分析结果表明,其初始176Hf/177Hf比值为0.282 243~0.282 404,εHf(t)为-10.376~-16.602,结合该岩体的Sr-Nd同位素地球化学特征,推测响洪甸碱性侵入岩是富集地幔部分熔融的产物,其源区可能有部分陆壳物质的参与。其形成的构造背景为后碰撞的伸展环境。 相似文献
4.
四川冕宁里庄稀土元素矿床矿石类型及金云母Ar-Ar年龄 总被引：1，自引：1，他引：0
四川冕宁-德昌稀土元素成矿带长约270 km,宽15 km,该成矿带包括牦牛坪超大型、大陆槽大型、木落寨中型和里庄小型稀土元素矿床及一系列矿点和矿化点。里庄稀土元素矿床作为矿带中唯一矿化特征以细脉浸染状为主的矿床,该矿床细脉浸染状矿化特征的成因和围岩蚀变特征尚未得到详细研究。文章将通过详细野外调查和室内研究,总结矿石类型和碳酸岩、正长岩蚀变特征,揭示细脉浸染状矿化特征的成因。研究表明,里庄矿床矿石类型以细脉浸染状为主,兼有少量角砾状。细脉浸染状矿石呈致密块状,矿物共生组合主要为氟碳铈矿+方解石+萤石+天青石+金云母,大规模的氟碳铈矿形成于热液阶段晚期并叠加在早期方解石、萤石和天青石等脉石矿物之上。细脉浸染状矿石全岩稀土元素配分显示LREE富集(33430×10~(-6)～46530×10~(-6)),HREE亏损(160×10~(-6)～192×10~(-6)),稀土元素总量高(33620×10~(-6)～46690×10~(-6)),全岩稀土元素配分特征与碳酸岩和正长岩相似,但后两者稀土元素总量较低。与牦牛坪发育脉状矿化系统、大陆槽角砾岩筒系统相比,里庄矿化特征以细脉浸染状为主,其可能是由于张性裂隙不发育造成的。区内正长岩-碳酸岩杂岩体广泛发育强烈的蚀变作用。正长岩发育典型霓长岩化,这种蚀变以钾长石被钠长石交代为特征,并形成次生鳞片状黑云母,少量半自形氟碳铈矿叠加在钠长石和黑云母之上。碳酸岩广泛发育红化,其原生表面洁净的方解石被流体交代,大量氟碳铈矿叠加在蚀变方解石之上。矿区矿体赋存在正长岩-碳酸岩杂岩体中,BSE图像及显微镜观察显示氟碳铈矿叠加在蚀变碳酸岩-正长岩之上,结合已有数据发现矿石及部分脉石矿物与碳酸岩-正长岩在微量元素和Sr-Nd-Pb同位素组成特征的一致,表明碳酸岩-正长岩杂岩体提供了本矿床稀土元素矿化的物质来源。此次研究中发现,在里庄矿床中大量发育与氟碳铈矿密切共生的金云母。文章对该金云母进行了Ar-Ar同位素测年,获得金云母形成年龄为(26.0±1.1)Ma,误差范围内与已报道的氟碳铈矿SIMS Th-Pb年龄和正长岩的锆石SHRIMP U-Pb年龄一致,进一步说明REE成矿与正长岩-碳酸岩在成因上具有一致性。 相似文献
5.
四川省同德石墨矿床是近年来在扬子板块西缘发现的大型中-大鳞片晶质石墨矿之一。为研究同德石墨矿地质特征及矿床成因,本文采用系统的野外地质调查、地球物理与地球化学等方法,并开展山地取样工程、岩矿测试研究工作。研究认为：同德石墨矿产于古元古代前震旦系康定岩群冷竹关组变质岩层中,赋矿岩石为云母石英片岩。矿体主要呈层状、似层状近南北向展布。矿石矿物为石墨,脉石矿物主要为石英、白云母、黑云母、斜长石及少量铁质矿物等。矿石自然类型为云母石英片岩型,工业类型为中-大鳞片晶质石墨矿。其原岩为一套含碳质泥岩、泥质粉砂岩、砂岩;碳质主要来源为有机物。物探自然电位梯度呈正负相伴,最低电位和梯度值为零的位置往往指示了石墨矿体的顶面中心;音频大地电磁测深呈带状向深部延伸的低阻异常指示了石墨矿体的深部赋存形态。矿床的形成经历了沉积成岩-区域变质阶段,属沉积变质型矿床。 相似文献
6.
冀西北水泉沟—后沟偏碱性正长杂岩体岩石学,岩石化学特征 总被引：3，自引：0，他引：3
水泉沟－后沟正生杂岩体是冀西北规模最大偏碱性岩体之一。岩体为５次侵入，８种岩石类型，主要造岩矿物是钾长石和钠长石，少量霓辉石，透辉石。岩石化学与世界偏碱性正长岩相似。 相似文献
7.
安徽金寨响洪甸碱性侵入岩年代学、岩石地球化学及其意义 总被引：4，自引：0，他引：4
金寨响洪甸碱性侵入岩体分布在大别造山带东北缘的北淮阳地区,侵位于上元古界青白口系佛子岭群中。主要岩石类型为正长岩（似斑状正长岩）、碱性正长岩和霞石正长岩。正长岩的主要矿物为碱性长石及少量黑云母、普通辉石、绿钙闪石;碱性正长岩包含钾长石、角闪石、辉石和少量黑云母;霞石正长岩主要由碱性长石、霞石及少量绿钙闪石、普通辉石、次透辉石等矿物组成。化学成分上均具有偏铝质、富碱、高钾、贫钛的特点。富集大离子亲石元素K、Rb、U、Nd和轻稀土元素La、Ce、Pr、Nd、Sm,亏损高场强元素Nb、Ta、P、Ti,轻、重稀土元素比值及La/Nb、Ba/Nb值较高,呈弱的负铕异常。根据高精度同位素年代学测试结果,响洪甸碱性侵入岩成岩期次分为2期：早期霞石正长岩,LA-ICP-MS锆石U-Pb年龄为（135.1±0.7） Ma;晚期正长岩,SHRIMP 锆石U-Pb年龄为（125.0±1） Ma和碱性正长岩,颗粒锆石U-Pb年龄为122.3 Ma。主体岩石似斑状正长岩的Hf同位素分析结果表明,其初始 176Hf/177Hf 比值为0.282 243~0.282 404,εHf（t）为-10.376~-16.602,结合该岩体的Sr-Nd同位素地球化学特征,推测响洪甸碱性侵入岩是富集地幔部分熔融的产物,其源区可能有部分陆壳物质的参与。其形成的构造背景为后碰撞的伸展环境。 相似文献
8.
钾长石中的铅及其对成矿的贡献 总被引：5，自引：0，他引：5
在中-酸性岩浆岩、碱性岩浆岩、片麻岩及混合岩等岩石类型中,钾长石是含铅最高的造岩矿物,其铅含量是全岩铅含量的2～10倍,云母类矿物铅含量的3～16倍,石英铅含量的6～32倍.早元古代、太古宙岩石中钾长石含量低,钾长石中的铅占全岩铅含量的比例低于10%,中元古代以来的碱性岩浆岩、富含钾长石的花岗岩和变质岩,钾长石含量增高,其中所含的铅占全岩铅的比例明显增大,钾长石含量达50%～70%的碱性岩,钾长石中的铅约占全岩总铅量的70%～95%.钾长石在后期极易发生水热蚀变,转变为绢云母、方解石、石英等,在这种转变过程中,铅大量析出进入流体相.这种变化能够为后期铅的成矿提供成矿物质. 相似文献
9.
通化县富江钾长石矿位于龙岗断块西部之柳河中生代上叠盆地南侧,区内构造发育,岩浆岩广布,成矿地质条件十分优越。通过工作,已发现正长斑岩型钾长石矿体14条,初步估算钾长石矿石量2 365万吨,为一大型钾长石矿床。本文阐述了富江钾长石矿所处的地质环境,总结了地质特征和找矿标志,为今后寻找该类型矿床提供借鉴。 相似文献
10.
云南个旧碱性岩体主要的岩石类型有碱性正长岩和似长石正长岩,其中,似长石正长岩中出现大量似长石矿物霞石、方钠石和碱性暗色矿物。本文根据矿物成分及特征,将这些似长石正长岩进一步划分为黑榴霞石方钠正长岩、霞石方钠正长岩、霞石正长岩及方钠霞石正长岩4类。岩石地球化学结果表明,4类岩石的地球化学行为整体表现出过碱质岩的特征,K2O+Na2O含量很高,为钾玄岩系列,同时表现出钾质的特点。分异指数高,呈现高度分异演化特点。稀土元素变化大,轻重稀土元素分异明显,富集轻稀土元素,亏损重稀土元素。微量元素富集大离子亲石元素Th、U及Zr、Hf等高场强元素,亏损Ba、Sr大离子亲石元素,而P和高场强元素Ta、Ti亏损,同时Cr、Co、Ni含量非常低,具有中等的负Eu异常和微弱的负Ce异常。研究表明,似长石正长岩在岩浆演化过程中表现出明显的分离结晶作用特征,且岩浆起源温度较高,约为835℃,起源较深。个旧似长石正长岩为A型岩套A1亚型,结合构造判别图解,认为其可能来自角闪石或者金云母相矿物存在的富集地幔,形成于燕山晚期伸展的构造背景,岩浆在较高温度下高度结晶分异,并在侵位过程中伴随陆壳成分的混染。 相似文献
11.
A Barremian microflora is recorded in the terrigenous facies (Weald) of the Lower Cretaceous in the northern region of the Province of Valencia (Spain), these beds have been poorly dated up to now due to the absence of fossils. The Villar del Arzobispo microflora correspond unquestionably to the Barremian-Aptien period, but the numerical importance of derived forms from the Jurassic, the remarkable variety of forms of Cicatricosisporites, and the rareness of pollen of Angiosperms, indicate a Barremian age to be more likely.This discovery permits us to establish the stratigraphical relationship of this terrigenousfacies of Villar del Arzobispo with the dated “Weald” of other areas of the Iberian Chain and to give a complete chrono-stratigraphical interpretation to the different litho-stratigraphical units that constitute the Lower Cretaceous of this region. 相似文献
12.
苏皖坡缕石粘土中蛋白石特征及其成因意义 总被引：1，自引：0，他引：1
TEM和XRD研究表明，在苏皖坡缕石粘土矿床的蛋白石坡缕石层中存在0pal-A和0pal-CT两种结构的蛋白石。蛋白石坡缕石层主要含坡缕石、opal-A、opal-CT，以及少量白云石和其它矿物，由富opal-A层和富opal-CT层互层组成，交互层的厚度在几个厘米左右。蛋白石坡缕石层中的矿物基本是自生矿物，从蒸发湖水中化学沉淀形成。矿物组成特征研究表明，蛋白石坡缕石层的矿物组分(Si、Mg、Al)来源于盆地周围玄武岩淋滤的浅层地下水。根据Opal-A和Opal-CT溶解度图解和城缕石、白云石形成物理化学条件图解，当湖水具有高浓度溶解SiO2和Mg^2 时，有利于opal-A和坡缕石形成，当湖水具有低浓度溶解SiO2时，有利于opal-CT结晶。因此，沉淀SiO2的结构状态取决于地下水补给的湖水溶解SiO2浓度。富opal-A和富opal-CT交互层的形成是古气候、古水文周期性变化的指示。富opal-CT层指示高地下水补给流入量，低蒸发量，湖水低盐度和溶解组分，代表湿润气候时期；而富opal-A层代表低地下水补给流入量，高蒸发量，高溶解组分浓度，代表干旱气候时期。 相似文献
13.
Summary Finite element analyses were conducted to investigate the magnitude of tensile strains imposed on landfill liners due to the
formation of subsurface cavities. The study incorporated the significance of using geogrids to reduce the magnitude of strains
and possibly the potential for collapse of landfill liners. Variations of key parameters included depth of overburden (D) and diameter of the cavity (B). Estimated stress distributions were compared to theoretical values obtained from a model reported in the literature.
Results indicated that, contrary to conventional wisdom, the critical area based on the mechanics of arching was above the
edge of the cavity where stress concentration occurred. Incorporation of geogrid reinforcement reduced the magnitude of tensile
strains. The tensile force in the geogrid was dependent upon the size of the cavity, the depth of the overburden, and the
applied pressure. 相似文献
14.
This paper concerns the evaporite units, depositional systems, cyclicity, diagenetic products and anhydritization patterns of the Calatayud Basin (nonmarine, Miocene, central Spain). In outcrop, the sulphate minerals of these shallow lacustrine evaporites consist of primary and secondary gypsum, the latter originating from the replacement of anhydrite and glauberite. In the evaporative systems of this basin, gypsiferous marshes of low salinity can be distinguished from central, saline lakes of higher salinity. In the gypsiferous marsh facies, the dominant, massive, bioturbated gypsum was partly replaced by synsedimentary chert nodules and siliceous crusts. In the saline lake facies, either cycles of gypsiferous lutite‐laminated gypsarenite or irregular alternations of laminated gypsum, nodular and banded glauberite, thenardite and nodular anhydrite precipitated. Early replacement of part of the glauberite by anhydrite also occurred. Episodes of subaerial exposure are represented by: (1) pedogenic carbonates (with nodular magnesite) and gypsiferous crusts composed of poikilitic crystals; and (2) nodular anhydrite, which formed in a sabkha. Additionally, meganodular anhydrite occurs, which presumably precipitated from ascending, highly saline solutions. The timing of anhydritization was mainly controlled by the salinity of the pore solutions, and occurred from the onset of deposition to moderate burial. Locally, a thick (>200 m) sequence of gypsum cycles developed, which was probably controlled by climatic variation. A trend of upward‐decreasing salinity is deduced from the base to the top of the evaporite succession. 相似文献
15.
Alan M. Jacobs 《Mathematical Geology》1971,3(3):227-238
Relative percentages of sand, silt, and clay from samples of the same till unit are not identical because of different lithologies in the source areas, sorting in transport, random variation, and experimental error. Random variation and experimental error can be isolated from the other two as follows. For each particle-size class of each till unit, a standard population is determined by using a normally distributed, representative group of data. New measurements are compared with the standard population and, if they compare satisfactorily, the experimental error is not significant and random variation is within the expected range for the population. The outcome of the comparison depends on numerical criteria derived from a graphical method rather than on a more commonly used one-way analysis of variance with two treatments. If the number of samples and the standard deviation of the standard population are substituted in at-test equation, a family of hyperbolas is generated, each of which corresponds to a specific number of subsamples taken from each new sample. The axes of the graphs of the hyperbolas are the standard deviation of new measurements (horizontal axis) and the difference between the means of the new measurements and the standard population (vertical axis). The area between the two branches of each hyperbola corresponds to a satisfactory comparison between the new measurements and the standard population. Measurements from a new sample can be tested by plotting their standard deviation vs. difference in means on axes containing a hyperbola corresponding to the specific number of subsamples used. If the point lies between the branches of the hyperbola, the measurements are considered reliable. But if the point lies outside this region, the measurements are repeated. Because the critical segment of the hyperbola is approximately a straight line parallel to the horizontal axis, the test is simplified to a comparison between the means of the standard population and the means of the subsample. The minimum number of subsamples required to prove significant variation between samples caused by different lithologies in the source areas and sorting in transport can be determined directly from the graphical method. The minimum number of subsamples required is the maximum number to be run for economy of effort. 相似文献
16.
17.
1 IntroductionThe term“Environmental Geochemical Baseline(EGB)”first appeared in the International Geochemi-cal Mapping Program (IGCP259) and the InternationalGeochemical Baseline Program (IGCP360) of Interna-tional Geography Contrast Program. The defin… 相似文献
18.
Discontinuities such as fractures or cracks are common in geo-materials. Connectivity is a comprehensive parameter that includes the influence of length, orientation and density of the discontinuities. The main objectives of this paper are to define connectivity based on the statistical geometrical parameters of a network of random discontinuities and to quantify the hydraulic properties of the network using connectivity. An analytical method is first proposed to evaluate connectivity through the density of degree of freedom (DDOF). The analytically estimated DDOF is verified using numerical analysis. DDOF increases with the increases in the mean length, relative orientation and density of the random discontinuity network. Connectivity becomes better and the permeability becomes larger with increasing DDOF. The representative element volume (REV) of a random discontinuity network can be estimated based on connectivity. When a discontinuity network is poorly connected, a REV does not exist when the size of the discontinuity network is smaller than 10 times of the mean length of the discontinuities. When a discontinuity network is normally connected, a REV exists when the REV size is smaller than 10 times of the mean length of the discontinuities. When the discontinuity network is highly connected, the REV size is only 2–4 times of the mean length of the discontinuities. The results indicate that DDOF is a good indicator to quantify the connectivity of a random discontinuity network and the relationship between connectivity and permeability. 相似文献
19.
利用孔隙度和渗透率参数,将陕西定边张韩区块油藏储层分为4类流动单元.分析各流动单元的物性特征,阐明不同级别流动单元分布特点及其与沉积微相的关系,获得各类流动单元物性特征参数. 相似文献
20.
Jan Drzymala Janusz Kapusniak Piotr Tomasik 《International Journal of Mineral Processing》2003,70(1-4):147-155
Potato starch and dextrins resulting from thermolysis of potato starch in the absence of reagents and presence of
-amino acids are promising depressants for separation of lead and copper minerals present in the Polish industrial copper concentrates. The polysaccharides were used for differential xanthate flotation of the final industrial concentrates produced by flotation with sulfhydryl collectors in the absence of depressants. The polysaccharides depressed galena and provided froth concentrate rich in chalcocite and other copper minerals as well as cell product containing lead minerals. The best results of separation were obtained in the presence of plain dextrin prepared by a thermal degradation of potato starch. The industrial concentrate containing 18.5% Cu and 5.5% Pb was divided into a froth product containing 38.1% Cu with 77% recovery of copper and a cell product assaying 7.3% Pb with 83% recovery of lead. It was accomplished using 2500 g/t of dextrin, 50g/t of potassium ethyl xanthate, and 50 g/t of frother (α-terpineol). The pH of flotation was 8.0–8.2. 相似文献