共查询到20条相似文献，搜索用时 46 毫秒
1.
2.
3.
4.
青海东昆仑地区是青海省重要的金、铜、铁多金属成矿区,1∶250 000、1∶50 000水系沉积物地球化学测量工作在该区域圈定了众多的异常区,但总体查证程度偏低。为实现该区域找矿重大突破,选定巴隆地区部署开展了以采集水系沉积物为主、残坡积岩屑物质为辅的1∶25 000沟系沉积物地球化学测量工作,取得了较为突出的找矿效果。该项工作表明,在青海省东昆仑地区,1∶25 000沟系沉积物地球化学测量方法是一种有效的地质找矿工作手段。该方法能有效克服东昆仑地区北部水系不发育、风成物干扰严重,南部高山区碎石流发育、影响水系沉积物汇聚等因素对找矿的干扰,相对传统的地质找矿方法在异常查证过程中的适用性、可操作性更强,找矿效果好,能实现矿体的精确定位,对东昆仑的地质找矿工作具有借鉴作用。 相似文献
5.
冶金部西南局605队自1982年以来,先后在川西地区不同景观条件下,各种金矿类型上进行1∶5万—1∶20万的水系沉积物地球化学测量,面积1万km~2余,土壤地球化学测量,面积几百平方公里。在工作过程中还做有水系沉积物测量和土壤测量找金的方法试验和技术试验。通过这些工作取得了明显的找矿效果,找到了丘洛、桥桥上、菜子沟金矿床(点)。本文是对川西地区水系沉积物找金的采样、加工和分析方法的回顾和总结,希望它对本区地球化学测量找金有参考价值。 相似文献
6.
1:20万区域化探方法核心技术"取样粒级"的讨论 总被引：2，自引：0，他引：2
内蒙古区域化探扫面采用水系沉积物测量(或土壤测量),取粗粒级样品,取得了较好的地质找矿效果,但局部景观区找矿效果受到了一些影响.我国南北方水系沉积物中元素含量呈"U"形分布,反映了南北方不同的风化类型,以及所取不同粒级样品的物质成分也不同;取粗粒级和细粒级样品均可能有化探异常显示,采用-5～+20目(0.9 mm≤A＜4 mm)和-120目(A＜-0.125 mm)组合粒级作为采样粒级.为提高工效,取样时可以采用-5目(或-20目)全粒级物质,也能获取更多的找矿信息.这种取样粒级技术,也适宜于全国各种不同的景观区的不同尺度的水系沉积物测量和土壤测量的化探工作. 相似文献
7.
8.
9.
通过开展福建街面—水口地区1:5万水系沉积物测量工作,获得了较丰富的水系沉积物地球化学测量成果。对水系沉积物18种元素总体含量和在不同地质单元中的含量特征进行了统计分析,明确了成矿有利期和主要成矿元素。根据元素异常分布规律结合成矿地质条件、已有矿床(点)划分了找矿远景区,明确了研究区找矿方向。 相似文献
10.
中国地质调查局与阿根廷地质矿产调查局合作在阿根廷西北部米纳毕戈塔地区进行1︰25万水系沉积物测量,该区属于干旱-半干旱高寒山区,为突出找矿效果,消除或减少风积物干扰,需要确定适合于该区的水系沉积物采样粒度。为此,在该区选择一个有已知矿床的1︰5万图幅进行采样粒度试验,分别选择10~60目、-60目、60~80目、-80目4个粒度级进行粒度试验;根据我国区域地球化学勘查规范,每个粒度分析39种元素。结果表明,大部分元素在4种粒度水系沉积物中的分布形态基本一致,都能够较好地反映出区内已知矿床,说明采用的采样方法可以有效地避免风成砂干扰;金、银、铜、锡等成矿元素在4种粒度中的分布略有差异,10~60目的金、铜和锡异常对已知矿体的反应更清晰准确。因此,本区水系沉积物地球化学测量的最佳采样粒度是10~60目。根据本次试验结果,中-阿地调局在本区联合开展1︰25万水系沉积物地球化学测量时采用了10~60目水系沉积物作为采样介质,取得了很好的效果。这是本区第一次进行水系沉积粒度试验,对本区将来的地球化学调查和研究具有指导意义。 相似文献
11.
Dispersed alkaline substrates (DAS) have been successfully used in passive treatment of highly contaminated acid mine drainage (AMD) to limit coating and clogging issues. However, further optimization of DAS systems is still needed, especially for their long-term efficiency during the treatment of ferriferous AMD. In the present study, three types of DAS comprised of natural alkaline materials (wood ash, calcite, dolomite), in different proportions (20%v/v, 50%v/v, 80%v/v), and a substrate with high surface area (wood chips) were tested in 9 batch reactors. The testing was carried out, in duplicate, for a period of 91 days, to evaluate the comparative performance of the mixtures for iron pre-treatment in ferriferous AMD (2500 mg/L Fe, at pH 4). Results showed increasing of pH (between 4.15 and 7.12), regardless of the proportion of alkaline materials in the DAS mixtures. Among the tested mixtures, wood ash type DAS were more effective for Fe removal (99.9%) than calcite or dolomite type DAS (up to 66%). All tested DAS had limited efficiency for sulfate removal and an additional treatment unit, such as a sulfate-reducing biochemical reactor, is needed. Moreover, due to the similar performances of the calcite and dolomite DAS, they could be potentially substituted and rather be used in a polishing treatment unit. Based on these findings, the most promising mixture was the 50% wood ash type DAS (WA50-DAS). 相似文献
12.
Within the past decade exceptional preservation of original organic components have been reported from several dinosaurian families, including members of Sauropodomorpha. Here we document the partial preservation of a vertebral ligament in the dorsal and sacral series of a titanosaur. Unlike other cases of tissue preservation, this structure does not represent biomineralization of the original organic components. Histology, morphology, and comparative anatomy from extant taxa as well as the preferential placement on the vertebral column suggests that it represents the partial preservation of the nuchal ligament. While preservation of other sauropod connective tissues are known, this case represents the first reported non-biomineralized tissue from a sauropod. In consideration of the location and external and internal morphologies compared to modern vertebral ligaments, we believe this structure to be the micritic replacement of the original tissue via microbially-mediated processes. Along with the suggestive external morphology, internally we interpret some of the unusual structures to represent the remnants of the collagen and elastin fascicles that are strongly overprinted by a clotted, thrombolytic-like fabric recording microbial activity and deposition of micrite prior to lithification. In consideration of the interpreted depositional history, we theorize that post-deposition, bacteria deposited the micrite as a byproduct of metabolization. Subsequently, the recognition of this structure as a vertebral ligament, the largest of such thus documented, substantiates previous findings on the morphological attributes of sauropod vertebral ligaments. 相似文献
13.
The new tribe Mediumiugamiini (Coleoptera: Polyphaga: Tenebrionoidea: Mordellidae) is described based on Mediumiuga sinespinis gen. et sp. nov. It is a fossil beetle from Albian (Early Cretaceous) amber from the Peñacerrada I outcrop (Spain). It is the first Spanish beetle described in amber. The mesotibiae and mesotarsi bearing multiple dorsal–lateral ridges, running oblique, metatibiae without any dorsal or dorsal–lateral ridge, only showing a subapical ridge, and metatibiae without apical spurs, define the new tribe. A key for worldwide tribes of Mordellinae, including Mediumiugamiini, is provided. Evolution of some characters of Mordellidae along Cretaceous is discussed. 相似文献
14.
The La Peña alkaline complex (LPC) of Miocene age (18–19 Ma) lies on the eastern front of the Precordillera (32°41ʹ34ʺS, 68°59ʹ48″W, 1400–2900 m a.s.l.), 30 km northwest of Mendoza city, Argentina. It is a subcircular massif of 19 km2 and 5 km in diameter, intruded in the metasedimentary sequence of the Villavicencio Formation of Silurian-Devonian age. It is the result of integration of multiple pulses derived from one or more deep magma chambers, which form a suite of silicate rocks grouped into: a clinopyroxenite body, a central syenite facies with a large breccia zone at the contact with the clinopyroxenite, bodies of malignite, trachyte and syenite porphyry necks, and a system of radial and annular dikes of different compositions. Its subcircular geometry and dike system distribution are frequent features of intraplate plutons or plutons emplaced in post-orogenic settings. These morphostructural features characterize numerous alkaline complexes worldwide and denote the importance of magmatic pressures that cause doming with radial and annular fracturing, in a brittle country rock. However, in the LPC, the attitude of the internal fabric of plutonic and subvolcanic units and the preferential layout of dikes match the NW–SE extensional fractures widely distributed in the host rock. This feature indicates a strong tectonic control linked to the structure that facilitate space for emplacement, corresponding to the brittle shear zone parallel to the N–S stratigraphy of the country rock. Shearing produced a system of discontinuities, with a K fractal fracture pattern, given by the combination of Riedel (R), anti-Riedel (R′), (P) and extensional (T) fracture systems, responsible for the control of melt migration by the opening of various fracture branches, but particularly through the NW–SE (T) fractures. Five different pulses would have ascent, (1) an initial one from which cumulate clinopyroxenite was formed, (2) a phase of mafic composition represented by dikes cross-cutting the clinopyroxenite, (3) a malignite facies that causes a small breccia in the clinopyroxenite, (4) a central syenite facies that develops breccias at the contact with the clinopyroxenite and, finally, (5) porphyry necks and a system of radial dikes intruding all units. At the moment of the emplacement different mechanisms would have acted, they summarized in: 1) opening of discontinuities synchronous to the magma circulation as the principal mechanism for formation of dikes and conduits; 2) stoping processes, that play an important role in the development of the breccia zone and enabling an efficient transference of material during the emplacement of the syenitic magma and 3) shear-related deformation (regional stress), affected the internal fabric of the facies, causing intracrystalline deformation and submagmatic flow, which is very evident in the central syenite intrusive. The kinematic analysis of shear planes allows proposing that emplacement of the LPC took place in a transtensive regime, which would have occurred in the back-arc of the Andes orogen, during a long period spanning from Miocene to the present, of the compressive deformation responsible, westward and at the same latitude, for the development of the Aconcagua fold and thrust belt. 相似文献
15.
Tyrannosaurs and hadrosaurs from the Late Cretaceous of eastern North America (Appalachia) are distinct from those found in western North America (Laramidia), suggesting that eastern North America was isolated during the Late Cretaceous. However, the Late Cretaceous fauna of Appalachia remains poorly known. Here, a partial maxilla from the Campanian Tar Heel Formation (Black Creek Group) of North Carolina is shown to represent the first ceratopsian from the Late Cretaceous of eastern North America. The specimen has short alveolar slots, a ventrally projected toothrow, a long dentigerous process overlapped by the ectopterygoid, and a toothrow that curves laterally, a combination of characters unique to the Leptoceratopsidae. The maxilla has a uniquely long, slender and downcurved posterior dentigerous process, suggesting a specialized feeding strategy. The presence of a highly specialized ceratopsian in eastern North America supports the hypothesis that Appalachia underwent an extended period of isolation during the Late Cretaceous, leading the evolution of a distinct dinosaur fauna dominated by basal tyrannosauroids, basal hadrosaurs, ornithimimosaurs, nodosaurs, and leptoceratopsids. Appalachian vertebrate communities are most similar to those of Laramidia. However some taxa-including leptoceratopsids-are also shared with western Europe, raising the possibility of a Late Cretaceous dispersal route connecting Appalachia and Europe. 相似文献
16.
The 3D architecture of fold-thrust belts commonly involves thin-skinned and thick-skinned deformation. Both thick- and thin-skinned deformation styles have been suggested to occur in the Marañón Fold-Thrust Belt (MFTB) in Peru, but the relative timing and strain partitioning associated with them are not well understood. We demonstrate that inherited basement structures along the Peruvian convergent margin reactivated during the evolution of the MFTB. We present results from field mapping, interpretation of remote sensing imagery, and cross section construction and restoration. The results show that the Chonta Fault, a median pre-folding basin normal fault, was inverted and acted as a mechanical buttress during initial east-vergent contraction of the fold-thrust belt. This fault separates the belt into two domains of distinctly different structural styles. During the Eocene, units to the west of the Chonta Fault deformed by folding, using the fault as a buttress, and subsequently propagated eastward by thin-skinned thrusting. This was followed in the Miocene by west-vergent, basement-involved deformation, which overprinted the earlier east-vergent, thin-skinned structures. The proposed tectonic model of the MFTB highlights the role of basement-fault reactivation during orogenesis and the involvement of deep structures in partitioning deformation styles. 相似文献
17.
The latest Cretaceous continental vertebrate faunas of the wider Transylvanian area figured prominently in discussions concerning the Cretaceous–Paleogene Boundary (K-Pg) events when they were first described by Nopcsa between 1897 and 1929, because they were assumed to be late Maastrichtian in age. Subsequently their age was reconsidered as early Maastrichtian, and were thus regarded of lesser importance in understanding the K-Pg boundary events in Europe and worldwide. Moreover, Transylvanian continental vertebrate assemblages (the so-called ‘Haţeg Island’ faunas) were often lumped together as a temporally restricted assemblage with a homogenous taxonomic composition. Recent fossil discoveries and more precise dating techniques have considerably expanded knowledge of the Transylvanian vertebrate assemblages, their ages, and their evolution. A synthesis of the available stratigraphic data allows development of the first comprehensive chronostratigraphic framework of the latest Cretaceous Transylvanian vertebrates. According to these new data, expansion of continental habitats and emergence of their vertebrate faunas started locally during the latter part of the late Campanian, and these faunas continued up to the second half of the Maastrichtian. During this time, long-term faunal stasis appears to have characterized the Transylvanian vertebrate assemblages, which is different from the striking turnovers recorded in western Europe during the same time interval. This suggests that there was no single ‘Europe-wide’ pattern of latest Cretaceous continental vertebrate evolution. Together, the available data shows that dinosaurs and other vertebrates were relatively abundant and diverse until at least ca. 1 million years before the K-Pg boundary, and is therefore consistent with the hypothesis of a sudden extinction, although this must be tested with future discoveries and better age constraints and correlations. 相似文献
18.
3S技术在土地利用中的应用 总被引：1，自引：0，他引：1
针对目前我国土地普遍存在的土地环境问题、原生土地问题、次生土地土地问题和社会土地问题,提出了应用“3s”技术进行辅助决策,以解决这些问题。 相似文献
19.
A simple procedure is proposed to simulate a smooth transition from elastic to elastoplastic behaviour in Cam-Clay models. The procedure consists of the definition of an external constitutive surface where full yield is assumed, and an internal one that allows the definition of the position in which plastic strains start to appear before the external yield surface is reached. The comparison of the model results with different laboratory tests shows the validity of the procedure. The method considers one additional parameter with regard to a “standard” critical state model, and it can easily be implemented in existing integration modules. 相似文献
20.
Here we describe an isolated tooth of a metriorhynchid crocodylomorph from the Hybla Formation (Aptian, Lower Cretaceous) of Rocca Chi Parra quarry (Montagna Grande, Calatafimi, Trapani Province), Sicily, Italy. The specimen shares with the Upper Jurassic taxon Plesiosuchus manselii a mediolaterally compressed conical tooth crown, noticeable lingual curvature, mesial and distal carinae with microscopic, rectangular contiguous denticles, strong distal curvature of the mesial margin, and the presence of weak 'carinal flanges' on the labial and lingual surfaces (which are preeminent at the mid-crown). This suite of morphologies is also present in an unnamed Valanginian (Lower Cretaceous) plesiosuchinan from France. However, the Sicilian tooth differs from these taxa in having more pronounced carinae, and faint apicobasally aligned enamel ridges. It also differs from P. manselii in having more extensive 'carinal flanges' on the labial surface. The specimen extends the known geological range of Metriorhynchidae and Thalattosuchia by approximately 7–8 million years. This overturns previous hypotheses of Metriorhynchidae becoming extinct early in the Early Cretaceous. 相似文献