首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 786 毫秒
1.
We performed petrophysical analyses on 34 clayey samples of different geological origin within the Campania region of Italy in order to determine possible sources of raw materials used to produce ancient pottery. Possible raw material sources can be grouped into high‐CaO clays (HCC) and low‐CaO clays (LCC). HCC are mainly represented by more recent (Miocene‐Pleistocene) basinal sediments whereas LCC tend to be associated with basinal, alluvial, and pyroclastic deposits. A chemical comparison between clayey raw materials, modern ceramic replicas, and Campanian archaeological ceramics of several typologies (common ware, cooking ware, fine tableware, amphorae, and bricks) from 8th century B.C. to the Middle Ages (a total of 350 ceramic samples) indicates that HCC were extensively used for common wares and that these were either mixed with temper or levigated. In contrast, most of the LCC were used for the production of cookware. We also analyzed the technological potential of the sampled raw materials, taking into consideration their actual and possible uses. We observed that most HCC deposits were well suited for tableware and amphorae, whereas LCC were better for cookware and some fine tableware.  相似文献   

2.
Archaeological excavations in Dalmatia have yielded a large amount of Hellenistic pottery that has yet to be archaeometrically analyzed. Stylistic analyses suggest that some vessels were imported, but the bulk of the material must have been produced locally. Our objectives are to demonstrate local ceramic production in both Greek colonies and native settlements in Dalmatia, and also to report on the composition and manufacture technology associated with this pottery. We examine 36 Hellenistic potsherds recovered from the coast of Croatia: a sanctuary on Cape Ploča, the native settlement of Resnik, and the Greek colony Issa. For the first time, archaeometric evidence supporting local production in Resnik is presented, while two local manufacturing centers are proposed for the bulk of the Cape Ploča pottery. The term Dalmatian production is suggested here to describe these indigenous ceramics. Material characteristics of the Issa samples suggest local colonial production and sophisticated ceramic technology.  相似文献   

3.
In Okinawa, locally produced pottery dates back to the Initial Jomon period (˜6500 14C yr B.P.). Later in time, especially during the Early Yayoi‐Heian period (˜300 B.C.–A.D. 300), ceramic assemblages appear to contain mainland (Japan) Yayoi pottery. A greater number of these sherds present in Okinawa over time coincide with an increasing amount of interaction with mainland Japan, as evidenced by other exchange items. In this preliminary study, the authors analyzed sherds from several Early Yayoi‐Heian period deposits from sites in Okinawa using thin‐section petrography and laser ablation inductively coupled plasma mass spectrometry (LA‐ICP‐MS). The objective was to examine the applicability of these techniques for Okinawan ceramic provenance studies, assess intra‐ and intersite variation in mineralogical and chemical composition, and determine whether some sites exhibited a higher frequency of pottery from one locale versus another that might suggest the importation of pottery from mainland Japan. Results are equivocal, suggesting that the region's geological complexity may inhibit successful provenance study of ceramics using these and possibly other compositional techniques. © 2006 Wiley Periodicals, Inc.  相似文献   

4.
Through a novel application of strontium (Sr) isotopic analysis, we evaluate geological sources for prehistoric ceramics in the eastern Grand Canyon region of northern Arizona, focusing on two gray‐ware traditions in the Upper Basin of the Coconino Plateau. Building on a conceptual framework for the general potential of Sr isotopes in the analysis of geological materials, we suggest that the eastern Grand Canyon is specifically well suited archaeologically and geologically for: (1) exploring the utility of Sr isotopes for ceramic provenance research and (2) testing long‐standing hypotheses that gray‐ware ceramics were invariably made with local materials. Sr isotopic compositions indicate that the ceramic samples represent at least three different geological sources, and that different raw materials were used in the manufacture of the two gray‐ware traditions found in the Upper Basin. One of the gray‐ware traditions is not compositionally consistent with local geology, indicating that either the ceramics or the raw materials were transported at least 20 km to the Upper Basin. © 2011 Wiley Periodicals, Inc.  相似文献   

5.
A two-dimensional numerical modelling that simulate the kinematic and thermal response of the lithosphere to thinning was used for the quantitative reconstruction of the late Neogene to Recent times tectonic and stratigraphic evolution of the North Sicily continental margin (southern Tyrrhenian Sea). The numerical study of the evolution of the North Sicily margin builds on the crustal image and kinematic interpretation of the margin obtained by Pepe et al. [Tectonics 19 (2000) 241] on the basis of seismic data and gravity modelling. Tectonic modeling indicate that different segments of the margin were undergoing different vertical movements, which are mainly expression of the rifting and thinning of the lithosphere occurred during tectonic evolution of the southern Tyrrhenian Sea. A prediction of the pre-rift basement topography and the Moho along the margin converges to a value of 6.5 km for the depth of necking and a temperature-dependent EET (500° isotherm). The model fails to reproduce the morphology of the Solunto High confirming its non-extensional origin. A polyphase evolution is required to reproduce the observed syn- and post-rift stratigraphy. During the first rifting stage (between 9 and 5 Ma), crustal thinning factors reach maximum values of 1.27 in the Cefalù basin. A similar value is predicted for the subcrustal thinning around 60 km NNE of the profile margin. Crustal thinning factors increase during the second rifting stage (from 4 to 2 Ma) and reach values of 2 and up to 3.5 in the Cefalù basin and in the continent–oceanic transition zone, respectively. Similarly, subcrustal lithospheric thinning factors reach values up to 2.5 in the distal sector of the margin. An uplift of more than 100 m is predicted for the North Sicily shelf and surrounding onshore areas during the post-rift stage. The evolution of thermal structure with time is very sensitive to the partial thinning factors describing the evolution of the thinning itself during time. The lithosphere preserved part of its strength during extension. The effective elastic thickness (EET) along the margin through time is 24 km at the onset of rifting and reaches values less to 8 km during the second rifting stage in the northeastern end of the margin.  相似文献   

6.
In this study, X‐ray diffraction (XRD) is applied to select ceramics, particularly dating to the Ayyoubid (A.D. 1174–1250) period from Tell Tuneinir in Syria. Because XRD has not been commonly applied to archaeological ceramics, a thorough background of the technique is given, with emphasis on quantitative measurements of quartz and calcite tempers. Several compositional groups based on raw materials and firing conditions emerge. While most ceramic samples are of local manufacture, Islamic stonepaste wares, and the “grenade” sample emerge as likely imports. We conclude that XRD is a powerful tool in characterizing archaeological ceramics and may be used to semi‐quantitatively gauge the amount of quartz, calcite, and feldspars in a sample. © 2001 John Wiley & Sons, Inc.  相似文献   

7.
The site of Pauli Stincus is located near the town of Terralba, on the inland shores of the Gulf of Oristano in west central Sardinia, Italy, and was occupied between the mid‐4th and the late 2nd century B.C. The site and its surroundings were the object of a joint archaeopedological and geomorphological study, which complemented the data from archaeological excavations. This study allowed us to evaluate the suitability of the different landscape and soil components for crop production in the Punic period. The discovery of a buried plow soil at the site's edge enabled us to identify a set of agricultural practices carried out by Punic farmers. These included the removal of sandy topsoil to cultivate deeper horizons enriched in illuvial clay, the use of a "sodbuster" or "rip ard," and the periodic burning of weeds, stubble, and other harvesting residues. The present study helped us to better understand the formation processes of the archaeological record at Pauli Stincus. Large quantities of allochtonous calcareous material were imported to the site from wet areas closer to the coast in order to produce earth‐based construction material, such as bricks and daub. © 2013 Wiley Periodicals, Inc.  相似文献   

8.
  相似文献   

9.
As the only place simultaneously occupied by the Middle Horizon (A.D. 600–1000) Andean states, the Tiwanaku and the Wari, the Moquegua Valley in southern Peru is of critical importance to understanding relations between the two states. Visual studies of Tiwanaku and Wari ceramics in the valley have elucidated differences in form and decoration. The procurement of raw clays was central to the production of these ceramics, and understanding where people procured their clay may provide insight into the social and economic interactions between these two states. Survey of the Moquegua Valley indicates the extensive availability of raw clays. Results of laser ablation inductively coupled plasma mass spectrometry (LA‐ICP‐MS) analyses of clays indicate that there is heterogeneity in the chemical signature of the valley's clays and that at least five different clay groups can be distinguished. Comparison of these clays with LA‐ICP‐MS analysis of ceramics from a Tiwanaku site and a Wari site demonstrates that although Tiwanaku and Wari colonists in Moquegua used locally available clays during the Middle Horizon, the clay sources exploited by potters from each state were different and derived from areas located within their respective middle and upper valley territories. This information provides a basis for future chemical analysis of ceramics from the Moquegua Valley and improved understanding of past social and economic interactions. © 2009 Wiley Periodicals, Inc.  相似文献   

10.
The potters' quarter of the ancient city of Sagalassos, southwest Turkey, was one of the largest and most enduring ceramic‐producing manufactories in the eastern Mediterranean. The objective of our study was to determine environmental circumstances that favored development of different clay resources in the territory of Sagalassos and to assess utilization of these resources in the local pottery manufactory. The potters' quarter was established where, owing to favorable geological circumstances, a large clay body had developed. The bedrock in the potters' quarter, a tectonized ophiolite sequence, has synclinal structure; hence, surface runoff and groundwater tend to accumulate in its center. The weathering of the basic rock formed a smectite‐rich clay with vertic properties. This clay was mined in antiquity, and mineralogical and chemical analyses indicate that it was used for the production of local ceramics from Hellenistic to Byzantine times. It is likely that colluvium on top of the ophiolitic clay at the potters' quarter is related to deforestation and slope processes after the potters' quarter was abandoned. In sum, environmental circumstances determined the location of the artisanal quarter of Sagalassos, with its clay quarrying operation and ceramic manufactory. However, for the local mass‐produced Sagalassos red slip ware, the results of our chemical and mineralogical analyses indicate that a different, more suitable clay was used: detrital lake sediments, rich in chlorite and chlorite/smectite mixed layers, located about 8 km from the original artisanal quarter. The choice for this clay was determined both by the presence of a suitable clay deposit, as well as socio‐economic circumstances such as land ownership. The site of Sagalassos yielded unique evidence of mining of clay at a ceramic production site, as well as import of nearby clays. The local and imported clays were used side‐by‐side, but one for the production of common wares and building ceramics, and the other for the manufacturing of luxury fine tablewares. © 2003 Wiley Periodicals, Inc.  相似文献   

11.
Lower Priabonian coral bioherms and biostromes, encased in prodelta marls/clays, occur in the Aínsa‐Jaca piggyback basin, in the South Central Pyrenean zone. Detailed mapping of lithofacies and bounding surfaces onto photomosaics reveals the architecture of coral buildups. Coral lithosomes occur either isolated or amalgamated in larger buildups. Isolated lithosomes are 1 to 8 m thick and a few hundred metres wide; clay content within coral colonies is significant. Stacked bioherms form low‐relief buildups, commonly 20 to 30 m thick, locally up to 50 m. These bioherms are progressively younger to the west, following progradation of the deltaic complex. The lowermost skeletal‐rich beds consist of bryozoan floatstone with wackestone to packstone matrix, in which planktonic foraminifera are abundant and light‐related organisms absent. Basal coral biostromes, and the base of many bioherms, consist of platy‐coral colonies ‘floating’ in a fine‐grained matrix rich in branches of red algae. Corals with domal or massive shape, locally mixed with branching corals and phaceloid coral colonies, dominate buildup cores. These corals are surrounded by matrix and lack organic framework. The matrix consists of wackestone to packstone, locally floatstone, with conspicuous red algal and coral fragments, along with bryozoans, planktonic and benthonic foraminifera and locally sponges. Coral rudstone and skeletal packstone, with wackestone to packstone matrix, also occur as wedges abutting the buildup margins. Integrative analysis of rock textures, skeletal components, buildup anatomy and facies architecture clearly reveal that these coral buildups developed in a prodelta setting where shifting of delta lobes or rainfall cycles episodically resulted in water transparency that allowed zooxanthellate coral growth. The bathymetric position of the buildups has been constrained from the light‐dependent communities and lithofacies distribution within the buildups. The process‐product analysis used here reinforces the hypothesis that zooxanthellate corals thrived in mesophotic conditions at least during the Late Eocene and until the Late Miocene. Comparative analysis with some selected Upper Eocene coral buildups of the north Mediterranean area show similarities in facies, components and textures, and suggest that they also grew in relatively low light (mesophotic) and low hydrodynamic conditions.  相似文献   

12.
This paper presents an analytical study of LateBronze andIronAge ceramics and natural clay deposits from the archaeological site ofPuig deSa Morisca in southwestMallorca,Spain. In our study, we combine petrographic, micropaleontological, mineralogical (X‐ray powder diffraction) and textural (laser particle size) analyses of sherds and local clays that may have been used as raw material in ceramic production. This approach allowed us to compare the ceramics’ formal characteristics with those observed in nearby plastic clays and assess raw clay procurement and paste preparation. The results indicate the use of local (<500 m distance) calcareous clays throughout theLateBronze andIron ages. This raw material was mixed with other coarser clays or crushed calcite, as well as other calcareous tempers, such as breccias or calcarenites, located close to the site. The results demonstrate that the same clay deposit was used to make ceramic vessels following different technological choices and recipes. Thus, local communities established a strong connection with the same raw materials through time that were located within the potters’ preferential range of exploitation.  相似文献   

13.
Anatolia has long been a major pottery production center of the ancient world, dating back 7000 cal yr B.P. The Early Iron Age Urartu Kingdom (800–600 B.C.) of eastern Anatolia is known for the production of high‐quality pottery, but little is known regarding firing technology and manufacture of these ceramics. Here we present a preliminary study of Urartu ceramic micromorphology and chemistry and suggest that the Urartus had good knowledge of local geology and intentionally used chemical fluxes (Pb, Rb, and Li) to attain desired firing temperatures. The sophisticated production of Urartu ceramics is comparable to later high‐quality Roman pottery (terra sigillata) procured from the same area. © 2010 Wiley Periodicals, Inc.  相似文献   

14.
The geoarchaeological record of the Phoenician necropolis of Al Bass (Lebanon) provides information concerning the geomorphological evolution of a late Holocene tombolo. Physical and chemical analysis of sediments indicates that the cemetery (9th century B.C.) was located near a littoral lagoon, between the dunes of a cuspate spit pointing toward the island of Tyre. From the sea apex of this spit, the moles mentioned in historical chronicles were constructed. Once mainland and island were connected, at the northern coast (where the port of Sidon was located), a sediment trap was formed, which quickly filled with silt. Afterwards, an extensive field of sand dunes buried all the archaeological remains from Phoenician to Roman times. © 2008 Wiley Periodicals, Inc.  相似文献   

15.
The ceramics in use across a broad upland zone of central Arizona during the early Classic period (ca. A.D. 1100–1300) were characterized by a lack of mineralogical variability; nearly all of the clay containers were tempered with one rock type, phyllite. Consequently, nearly all of the upland pottery is assigned to a single pottery type, Wingfield Plain. This compositional uniformity has frustrated ceramic provenance studies, and, as a result, little has been learned previously about the organization of ceramic production and exchange in the upland territory. There are, however, considerable and interpretable chemical differences in the phyllite‐tempered wares, as shown with microanalyses of the temper fragments and pottery clay fractions with an electron microprobe. The chemical patterning is useful for investigating issues pertaining to the upland zone, including the organization of ceramic manufacture, community arrangements, and pottery transactions during a time of prevalent hostilities in central Arizona. © 2008 Wiley Periodicals, Inc.  相似文献   

16.
We report a detailed rock‐magnetic and archaeointensity analysis of four pottery fragments and a burned floor recovered from the Tzintzuntzan archaeological site in western Mexico. Results from rock‐magnetic experiments (x‐T curves and first‐order reversal curves [FORC] diagrams) indicate the suitability of most of these materials as faithful geomagnetic field recorders. Potsherds were archaeomagnetically dated by comparing their mean intensity values against the paleosecular variation curve CALS3k, suggesting A.D. 600–941 as the most probable age range. This is younger than 14C‐dated charcoal from the same burned floor (A.D. 1294–1426). More precise age estimates will require the use of the full geomagnetic vector (declination, inclination, and intensity). Multiple reheatings of the ceramic pieces, evidenced as secondary components in Zijderveld plots, could reflect multiple heating of these objects, perhaps from use as incense burners. Our study demonstrates the potential of archaeomagnetic analysis to both date burned ceramics recovered in situ and provide insight into their use‐history.  相似文献   

17.
Identification of the exact route followed by Hannibal during his invasion of Italia in the Second Punic War is one of the major questions of antiquity and one that historians/archaeologists have long studied. One of the many clues in the ancient literature that can help answer this question is the mention of fired rock, the result of a conflagration Hannibal is reputed to have employed to reduce the size of boulders in a blocking rockslide some distance down from the high col on the Italian side. The only route with evidence of fired rock along the roadway leading into Italia follows the Col du Clapier, one of the possible northern routes discussed by historians. Radiocarbon dating of calcined rocks is not possible, but whereas Time‐of‐Flight Secondary Ion Mass Spectrometry (ToF‐SIMS), Field Emission Scanning Electron Microscope (FESEM‐EDS), backscatter electron scanning microscopy (BSE), High Resolution Transmission Electron Microscope (HRTEM), and Raman Spectroscopic data do not provide an age for the burnt rock, compositional evidence of the conflagration derived from these analyses may shed light on Hannibal's actual route. © 2007 Wiley Periodicals, Inc.  相似文献   

18.
The Calhan Paint Mines District, 5EP3258, Colorado, presents exposures of an exceptional clay source. When the area also produced prehistoric Ceramic stage sites, it provided the opportunity for both pottery and potential clay source analysis by optical petrography, X‐ray diffraction, and neutron activation. Although the main purpose of this study is the characterization of the ceramics and outcrop clays, results from a limited number of samples suggest that the colorful clays, the figurative “paints,” of the Calhan Paint Mines were purposely used in prehistoric times as clay source materials for ceramic production. The Calhan Paint Mines are quite possibly the only prehistoric Plains Ceramic stage clay source currently confirmed within the state of Colorado. © 2002 Wiley Periodicals, Inc.  相似文献   

19.
The scale of warfare and alliance in the ancient American Southwest is hotly debated for the interval from A.D. 1100 to 1450. Some archaeologists posit conflict persistently waged in central Arizona, which thereby promoted the emergence of region‐sized polities, including the so‐called Verde Confederacy. Relying largely on settlement‐pattern data, these theorists have hypothesized warfare and alliance practiced at a regional scale, apparently larger than anywhere else in the prehistoric American Southwest. Other evidence, however, has challenged the Verde Confederacy model and the level at which hostilities raged in central Arizona. It calls into question the organizational capabilities of hostile tribal groups and their strategic goals. In this paper, we add a new line of complementary information based on the compositional analysis of phyllite‐tempered plain ware ceramics. By reconstructing the pottery's movement and exchange across the region, we outline patterns of interaction useful for evaluating the scale of alliance and warfare in central Arizona. We find, contrary to the expectations of regional scale alliances, that the ceramic exchange networks segregated some populations previously proposed to have been aligned, while integrating groups thought previously to have been enemies. The ceramic data indicate alliances and hostilities at a relatively local scale.  相似文献   

20.
Qualitative stylistic evidence from ceramic vessels and limited petrographic analysis suggested that a distinctive group of ceramics with visible inclusions of biotite (Gold Mica Fabric) was produced on the island of Aegina, Greece, during the Middle Helladic and Late Helladic I periods. To quantitatively evaluate this provenance, we sampled all potential source rocks on Aegina, Methana, and Poros. Electron microprobe analysis of amphibole in these samples revealed that each of these volcanic centers has its own unique mineralogical signature. Comparative analyses of amphibole in Zerner's original stylistic “Gold Mica Fabric” type sample with the reference samples reveal that two sherds are Aeginetan. Three additional sherds from this sample may have a non‐Aeginetan provenance, probably from a back‐arc setting outside the Saronic Gulf. These results suggest that the hypothesis of a single source production site for Aeginetan Ware should be reexamined. © 2002 Wiley Periodicals, Inc.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号