首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到18条相似文献，搜索用时 125 毫秒
1.
There is a coupling of thermal, mechanical, chemical and fluidal processes in a continental shear zone. Both Xincheng-Xishui and Hetai shear zones are typical continental crust shear zones of greenschist facies environment. The representative mylonite zones of the shear zones are studied with whole rock major and trace element analyses. The chemical compositional variation tendencies in both shear zones are very similar and the gain-loss ratios of various components in the mylonitic rocks are reflected in the mass balance equations. The enrichment of those immobile high-field-strengh elements is considered to he related to the volume loss of the myionitic rocks in a shear zone. Based on the volume loss expression C_s/C_o=1/(1-V),the fractional volume losses (V)are 37.5％ and 36.5％-42.3％ respectively for mylonites and ultramylonites in the Xincheng-Xishui shear zone and 11％ and 28％ respectively for mylonites and phyllonites in the Hetai shear zone. The high volume loss and large removal of SiO_2 from  相似文献   

2.
This paper discusses the relationship between the volume loss, fluid flow and component variations in the ductile shear zone of the southern Tan-Lu fault belt. The results show that there is a large amount of fluids flowing through the shear zone during mylonitization, accompanied with the loss of volume of rocks and variations of elements and oxygen isotopes. The calculated temperature for mylonitization in different mylonites ranges from 446 to 484℃, corresponding to that of 475 to 500℃ for the wall rocks. The condition of differential stress during mylonization has been obtained between 99 and 210 MPa, whereas the differential stress in the wall rock gneiss is 70-78 MPa. The mylonites are enriched by factors of 1.32-1.87 in elements such as TiO2, P2O5, MnO, Y, Zr and V and depleted in SiO2, Na2O, K2O, Al203, Sr, Rb and light REEs compared to their protolith gneiss. The immobile element enrichments are attributed to enrichments in residual phases such as ilmentite, zircon, apatite and epidote in mylonites and are interpreted as due to volume losses from 15% to 60% in the ductile shear zone. The largest amount of SiO2 loss is 35.76 g/100 g in the ductile shear zone, which shows the fluid infiltration. Modeling calculated results of the fluid/rock ratio for the ductile shear zone range from 196 to 1192 by assuming different degrees of fluid saturation. Oxygen isotope changes of quartz and feldspar and the calculated fluid are corresponding to the variations of differential flow stress in the ductile shear zone. With increasing differential flow stress, the mylonites show a slight decrease of δ^18O in quartz, K-feldspar and fluid.  相似文献   

3.
The Shibangou gold deposit in western Henan is associated with irregular quartz veinlets occurring in altered shear zones dissecting a dioritic intrusion. The altered shear zones are characterized by silicification, pyriti-zation, sericitization, chloritization and K-feldspar alteration. Zoning of altered rocks adjacent to the Au-bearing quartz veins is obviously exhibited. Fine-grained sulphides and quartz veinlets of different ages and small-scale fissures are widely distributed in the central part of the altered zones. Major mineralization types in this gold deposit are Au-bearing quartz vehlets and altered rocks in the shear zones. Samples were collected from drilling cores according to the alteration zoning and mineralization type and all samples were analyzed for major and trace elements. Mass balance, volume change (fv=97.3-71.9%) and major element variation sequences are studied in terms of major elements. The changes of mobile components (SiO2, K.2O, Fe2O3 and CaO) and immobile component (Al2O3  相似文献   

4.
The ductile shear zone-type gold deposit is a kind that both the ore-forming mechanism and ore-controlling factors are closely related to the ductile shear zone and its evolution. Ductile shear zone develops in Beishan area, Gansu of Northwest China, and develops especially well in the south belt. The controls of the ductile shear zone on gold deposits are as follows. (1) The regional distribution of gold deposits (and gold spots) is controlled by the ductile shear zone. (2) The ductile-brittle shear zone is formed in the evolution process of ductile shear zone and both are only ore-bearing structures and con- trol the shape, attitude, scale, and distribution of mineralization zones and ore-bodies. (3) Com- presso-shear ductile deformation results in that the main kind of gold mineralization is altered mylonite type and the main alteralization is metasomatic. (4) Ore-bearing fracture systems are mainly P-type ones, some D-type and R-type ones, but only individual R’-type and T-type ones. (5) Dynamic differen- tiation and dynamic metamorphic hydrothermal solution resulting from ductile deformation is one of the sources of ore-forming fluid of gold mineralization, and this is identical with that ore-forming ma- terials are mainly from metamorphic rocks, and ore-forming fluid is mainly composed of metamorphic water, and with the fluid inclusion and geo-chemical characteristics of the deposit. (6) There is a nega- tive correlation between the gold abundance and susceptibility anisotropy (P) of the altered mylonite samples from the deposit, which shows that the gold mineralization is slightly later than the structural deformation. All above further expound the ore-forming model of the ductile shear zone type of gold deposits.  相似文献   

5.
Abstract：In this study, whole-rock geochemical and Nd isotopic data, as well as detrital zircon Hf isotopes of Palaeoproterozoic metasedimentary rocks from the Jiangxian Group are presented to evaluate the characteristics of their provenance and the tectonic history. The major and trace element compositions are comparable to Post-Archean upper continental crust (PA-UCC), but have slight enrichment in the LILE, with the exception of Cs and Sr, and a slight depletion in ferromagnesian elements, HFS elements, such as Nb and Ta, and some major elements, such as CaO and Na2O. The geochemical data reveal that the collected metasedimentary rocks have experienced intermediate source weathering with chemical index of alteration values ranging from 72 to 78, varying degrees of K-metasomatism, and post-depositional loss of Na, as well as negligible sorting, and are derived from the weathering of mostly felsic and non-mafic rocks. The selected Lu–Hf isotopic analysis on detrital zircon points to both the Trans-North China Orogen and Eastern Block of the north China craton as the most likely sources for the metasedimentary rocks of the Jiangxian Group. However, a contribution of detritus from the Western Block of the north China craton can be ruled out. The sediments were probably deposited in a back-arc basin within an active continental margin setting.  相似文献   

6.
Gabbro is selected as a sample for experimental deformation to investigate and validate the migration of dements during rock deformation. Samples are deformed for 3 h under a strain of about 5% at T=700℃, p=100 MPa, σ=50 MPa. It is shown that there are 4 areas with different colors in the section of the samples paralld to σ1 : the extensional, contractional, and strongly compressional areas and a ductile shear zone, respectively on the basis of the stress states and the direction of material movement. The chemical components such as K, Na, AI and Fe from materials in different areas have changed. The four elements mentioned above in pyroxene grains decrease in content from the extensional area through the ductile shear zone, the contractional area, to the strongly compressional area. The contents of the same elements in feldspar grain vary in a reverse direction.  相似文献   

7.
The G. Abu Garadi area is covered mainly by metasediments, alkali feldspar granites and stream sediments. The alkali feldspar granite is traversed by a major strike-slip fault trending in an N-S direction as well as two subordinate sets of faults trending NW to WNW for the first one and NE for the second one. These faults represent the shear zones affected by magmatic (syngenetic) as well as hydrothermal (epigenetic) activities causing alteration of the granitic rocks. The most common alteration features are albitization, greisenization and koalinitization. The mass balance calculations of the studied altered samples show enrichments in Zr, Y, Ni, U, Th and Ga and depletions in Zn, Sr, Nb, Ba, Pb, Cu and V. Only the greisenized samples exhibit a significant enrichment in Nb, ∑REE budget and pronounced lanthanide tetrad effect (M-type), especially TE1,4, while weakly expressed tetrad effects are for the other albitized and koalinitized samples. Mineralogically, the common accessory minerals in the altered samples include samarskite-(Y), betafite, uranothorite, zircon, fluorite and cassiterite. The greisenized granites contain high eU and eTh than the other altered types, where they are characterized by an assemblage of the radioactive minerals; samarskite-(Y), betafite, uranothorite in addition to zircon. The inter-element relationships between U and Th and also their ratios illustrate that the radioelement distribution in these granites is mainly governed by magmatic processes, in addition to post-magmatic ones. The distribution of chemical elements and the fractionation of some isovalents within the shear zone are largely controlled by the newly formed mineral phases. With respect to uranium mobilization, uranium migrated from the host alkali feldspar granites of G. Abu Garadi, while the shear zones acted as traps for the migrated uranium. Moreover, U migrated in the shear zone during greisenization and albitization, and migrated out during koalinitization.  相似文献   

8.
The paper deals with the metallogenic conditions and regularities of the region ol the lower-middle reachesof the Changjiang River in China. The complicated structural network with the Changjiang (Yangtse) deepfracture as its trunk is the leading rock-and ore-controlling structure of the metallogenic belt. Thehigh-potassium granodiorites of the first magmatic sequence of the Mesozoic Yangtse syntexis type and thesodium-rich diorites of the second sequence are genetically related to the copper ore series and the iron ore se-ries respectively. and occur respectively in the block-faulted and-folded uplift area and the down-faulted vol-canic basin as well as the transitional zone between the two. The ore-hosting horizons show specific associa-tions of rocks and often contain ore beds basically of stratabound nature.  相似文献   

9.
Geological, geophysical, geochemical and remote sensing comprehensive studies show that big ore-prospecting potentiality is contained in the eastern section of the Gangdise Mountains, Tibet.There are various mineralization types with dominant types of porphyry and exhalation. According to their relations with tectonic evolution, they are divided into four kinds of metallogenic series as follows:magnmtic type (Cr, Pt, Cu, Ni) and exhalation type (Cu, Pb, Zn, Ag) ore deposit series related to Neo-Tethys oceanic crust subduction action (125-96 Ma); epithermai type (Au, Ag, Pb, Zn, Sb), altered fractured rock type (Cu, Mo) and skarn rock type (Cu) ore deposit series related to arc-continental collision; porphyry type (Cu, Mo), cryptoexplosion breccia type (Cu, Au, Pb, Zn), shear zone type (Au, Ag, Sb) and skarn rock type (Cu, Fe) ore deposit series with relation to post-orogenic extensional strike-slip. From subductive complex to the north, zoning appears to be crystallization differentiation type (segregation type)-shear zone type (altered rock type)-skarn rock type, epithermai type-porphyry type-porphyry type and exhalation type-exhalation type-hydrothermai filling-replacement type.The ore deposit is characterized by multi-places from the same source, parity and multi-stage, hypabyssal rock from the deep source and poly genetic compound as a whole.  相似文献   

10.
Under the action of tectonic stress ore fluids carrying ore-forming materials can migrate from a higher stress district to a lower one.This is a fact which has been widely accepted by geological cir-cles.However,can the components migrate in solid rocks under the action of stress?This problem has long attracted the attention of many geologists.The author has made a series of simulating experi-tal system.The results show that mylonite was produced as a consequence of shear flowage deformation in dolomite .The contents of the elements in porphyryclast and flowage deformation matrix were analyzed by means of electron microprobe,and the results show that Pb and Zn are obvi-ously concentrated in the shear-flowage deformation zone.Furthermore,Pb is concentrated in its cen-tre while Zn is concentrated on its margins .Newly-formed micro-grained galena can be detected locally.  相似文献   

11.
魏俊浩  张德全 《地质科学》1999,34(4):473-484
以河南西峡石板沟金矿为例,选择了一条控矿剪切带,对其中成矿地段的近矿蚀变岩和非成矿地段糜棱岩进行了系统的采样,探讨了二者在流体-岩石反应及岩石质量平衡之间的差异性。研究表明,剪切带中矿化地段蚀变岩其岩石体积总是扩容的,非矿化地段糜棱岩在变形过程中体积是损失的。矿化地段蚀变岩活性元素(K、Na、Si)总体呈被带入趋势,非矿化地段糜棱岩活性元素总体呈迁出趋势,糜棱岩的流体岩石率(Nu为93.68—468.40)远大于蚀变岩的流体岩石率(Nc(Ⅳ)s为36.11-216.67),剪切带中常量元素与微量元素富集与损失是渗透性流体带入、带出,岩石的体积损失与扩容综合作用的结果。  相似文献   

12.
Geological, petrological and structural observations were obtained along a 30-km-long traverse across a segment of the Valle Fértil shear zone, central-western Argentina. On a regional scale, the shear zone appears as numerous discontinues belts over 25 km in width and is approximately 140 km in length, extended on the western section of the Sierras Valle Fértil – La Huerta mountain range. The steeply dipping shear zone with a vertical mylonitic lineation is composed of amphibolite facies ribbon mylonites and amphibolite to greenschist facies ultramylonites derived from Early Ordovician plutonic and metasedimentary parent rocks. Locally, syn-kinematic retrogression of mylonites formed greenschist facies phyllonites. During the later stages of deformation, unstrained parent rocks, mylonites, ultramylonites and phyllonites were affected by pervasive cataclasis under low greenschist facies conditions associated with localized faulting. One new 40Ar/39Ar age on biotite and published 40Ar/39Ar ages on amphibole in the shear zone yield an average cooling rate of 6.2 °C/Ma for a time period that crosses the Silurian–Devonian boundary. Since in metasedimentary rocks the youngest zircon's rims dated at 465 Ma marks the beginning of cooling, nearly continuous uplift of rocks within the shear zone occurred over a minimum time span of 55 Ma. During the period of active deformation, dip-slip movement can explain uplift of several kilometers of the Early Ordovician arc crust. The Valle Fértil shear zone, which was formed near above the inferred suture zone between the Famatinian arc and Cuyania microcontinent, is a major structural boundary nucleated within the Early Ordovician crust. The simplest geodynamic model to explain the evolution of the Valle Fértil shear zone involves the collision of the composite Cuyania/Precodillera microcontinent against the Famatinian arc.  相似文献   

13.
同韧性剪切断裂是一种新的断裂类型,它既不同于脆性断裂,也不同于韧性剪切带。它是韧性剪切带在一定条件下发展到一定程度转化为宏观破裂的产物,在宏观、微观、地球化学等许多方面独具特征。它的研究对丰富和发展构造地质学理论、地质找矿、地震、地质灾害、工程稳定等许多方面有重要意义。  相似文献   

14.
刘德良  杨晓勇 《岩石学报》1996,12(4):573-588
本文对郯庐断裂带南段主干断裂典型的韧性剪切带进行了系统的剖析。从糜棱岩塑性变形的亚颗粒化、动态重结晶和矿物成分特征及岩石组分迁移变化等入手进行系统的研究工作，计算了岩石形成的温度、压力和流动应力和流变速率参数；模拟计算了岩石在剪切变形作用下的体积亏损及组分迁移的量值，探讨了变形－变质及流体的相关关系  相似文献   

15.
The effects of high-strain deformation and fluid infiltration during Alpine eclogite facies metamorphism have been studied across ductile shear zones in relatively undeformed metagranitoids at Monte Mucrone (Sesia Zone, Western Alps, Italy). Microfabrics together with bulk rock and stable isotope data indicate that the mineralogical and chemical variations are related to the degree of deformation, rather than to changes in P-T conditions or tectonic position. Transformation of meta-quartz diorite to recrystallized eclogitic mylonites involved the breakdown of biotite and plagioclase and required the influx of H2O. Bulk-rock geochemical data show that ductile deformation to form eclogitic mylonites involved an increase in volume with a weight percent gain in H2O and Si and variable loss of K, Na, Ca and Al. δ18O changes systematically across ductile shear zones into the undeformed country rocks. Constant values in shear zone centres indicate advection parallel to the shear zone and within 10 cm of the mylonites. A dominant component of diffusive oxygen exchange perpendicular to the shear zones produced isotopic fronts, evident from a gradual increase in δ18O values to the reference values of the country rocks. The degree of isotopic shift within the shear zones reflects increasing deformation and degree of reaction progress. Multiple phases of Alpine deformation and mineral growth are recognized in the Monte Mucrone metagranitoids, and in some cases, eclogite facies shear zones were reactivated under greenschist facies conditions. The results of this study suggest that high-strain deformation provided pathways for both synkinematic and post-kinematic metamorphic fluids which were necessary for complete reactions. Relict igneous fabrics, as well as the presence of corona textures around biotite and pseudomorphs after primary igneous plagioclase in the least deformed rocks, indicate a paucity of hydrous fluids and support the conclusion that fluid movement was channelled rather than pervasive.  相似文献   

16.
康古尔地区金矿成因类型及其控矿因素   总被引：2，自引：0，他引：2  
新疆康古尔地区地质、构造复杂、成矿条件独特,是以金为主的多金属矿成矿有利地段。金矿成因类型多样,有韧性剪切带型、超浅成低温火山－水热型、中低温火山水热型、中低温岩浆－水热型等。剪切带型金矿是本区主要成矿类型。大地构造、地层岩性、侵入岩、火山岩和韧性剪切带等均与金矿形成有着密切关系。中酸性火山岩是本区主要成矿母岩,韧－脆性剪切带是金矿形成的重要导矿构造。成矿物质来源于上地幔和下地壳。主要成矿时代为晚  相似文献   

17.
The Ronda peridotites form the largest mass of subcontinental mantle outcropping on land. Unlike other orogenic lherzolite massifs, the two main bodies of Ronda (the Sierra Bermeja and Sierra Alpujata massifs) are unique cases where ductile shear zones linked to the hot thrusting of mantle over continental crustal rocks are well exposed. We present a new insight into the deformation localization in these shear zones based on structural, fabric and petrological data. The Ronda peridotites show increasing deformation towards the continental footwall rocks, from porphyroclastic rocks to ultramylonites. Garnet-pyroxenites from the basal shear zone of the Alpujata massif yield ca. 1100 °C and 1.4 GPa for the mylonitization. Such conditions promoted partial melting and the formation of felsic dynamothermal aureoles from the underlying crustal rocks. Subsequent deformation is mainly localized in the dynamothermal aureoles, since they are weaker than the peridotites. Both aureoles show marked strain gradients towards the contact but record different kinematics. In Sierra Alpujata, kinematic criteria indicate a top-to-the ENE shear sense, whereas in Sierra Bermeja the felsic mylonites provide a top-to-the NNW motion. A transpressional setting is proposed to explain such kinematic shift.  相似文献   

18.
康古尔金矿具有独特的成矿地质特征,矿床位于石炭系火山岩区大型韧性剪切带的次级构造中.控矿构造表现为脆韧性剪切活动的特点,该脆韧性剪切带在成矿期的活动具有中低温、高应变速率、高差异应力的动力学特征.金矿床的分布受脆韧性剪切带控制,矿体由蚀变千糜岩和糜棱岩化火山岩中矿化富集地段组成,矿体产状平行于糜棱岩面理.矿化产于脆韧性变形强烈部位,脆性变形叠加有利于形成富金矿.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号