共查询到20条相似文献，搜索用时 15 毫秒
1.
为研究加载速率对砂岩抗拉强度的影响效应及影响机制,设计开展5种加载速率的劈裂试验,综合分析抗拉强度、破坏特征、能量参数和劈裂面微观形貌变化规律及相关性。结果表明,(1) 随着加载速率增大,砂岩劈裂抗拉强度逐渐增大,总体呈现先陡后缓的趋势,加载速率在0.01～0.10 kN/s范围内时抗拉强度增长迅速,0.10～1.00 kN/s范围内时抗拉强度增长趋势渐缓;(2) 随着加载速率的增大,岩样吸收的总能量增大,弹性应变能占总能量的比值逐渐增大,耗散能占总能量的比值逐渐减小,加载至破坏时裂纹扩展形成宏观劈裂面的时间呈数量级减小,达到峰值应力时弹性应变能的释放,导致岩样破坏的突发性增强,使得劈裂面形貌特征在宏观和微观上逐渐变得复杂,对应抗拉强度逐渐增大;(3) 在岩石劈裂试验过程中加载速率、能量参数、劈裂面形貌特征与抗拉强度密切相关,加载速率影响加载过程中能量的总量与分配,能量参数的变化直接影响岩样的破坏过程及劈裂面的形貌特征,最后宏观上表现为抗拉强度的差异。文中相关分析方法和思路可为类似试验提供较好的参考。 相似文献
2.
当横波不平行也不垂直穿过裂缝时,会发生横波分裂现象。这里基于横波分裂理论,采用二维分量旋转方法进行转换波分裂分析。为了得到地层裂缝信息,提高宽方位转换波径向分量成像质量,利用宽方位转换波的径向和横向分量资料,完成了多层裂缝介质的各向异性分析。在此基础上,还完成了转换波方位各向异性校正研究。首先,利用分量旋转方法求出第一裂缝介质层的各向异性方向、快慢横波时延等参数;然后,将快、慢横波时延应用于慢波数据进行慢波时延补偿;最后,根据第一层的方位角将快波和补偿后的慢波旋转回原来的径向和横向分量方向。这样,就完成了第一裂缝层的各向异性分析,同时还得到第一层的裂缝方向、裂缝密度、补偿后的径向分量等数据。依此类推,进行以下裂缝层的各向异性分析。该转换波各向异性分析技术已应用于川西XC气田的宽方位三维三分量地震数据处理,不但得到了裂缝参数,而且还消除了宽方位转换波的方位各向异性影响,提高了转换波径向分量的成像质量。 相似文献
3.
交叉裂隙作为裂隙网络的基本结构是控制场地尺度非饱和渗流特性的关键。随着流量的减小,交叉裂隙非饱和渗流将从连续、稳定的线状流转变为非连续、非稳定的滴状流,但目前对后者的研究还很少。在滴状流条件下,开展了交叉裂隙非饱和流动特性的理论和试验研究,发现了交叉裂隙滴状流存在毛细力驱动以及重力与毛细力联合驱动两种分流驱动模式。基于瞬态静力平衡方法,提出了一套液滴分流理论及计算模型,实现了动态分流过程的定量化描述与预测。结合模型预测与可视化试验,详细探究了两种模式下液滴的分流过程,阐明了动态分流行为受重力、毛细力、黏滞力共同控制的细观机制,并揭示了液滴长度、裂隙倾角、通道中液体的累积等因素对界面流速、分流体积比例的影响。研究成果为低流量、低饱和度条件下非饱和裂隙岩体渗流的预测与控制提供了理论及试验支撑。 相似文献
4.
分叉煤层对比是地质勘探工作中的一个难题,朔县平原从普查阶段,对沉积环境进行了大量的研究,促进了6号及9号煤层分叉的对比工作。在详查阶段摸清了煤层分叉规律,9号煤层形成于滨海潟湖潮坪体系,6号煤层形成于水下三角洲平原体系,因海水进退,使9号煤层在西南方向分叉,6号煤层在35号勘探线以南分叉。在勘探阶段进一步证明预测的正确性。沉积环境的分析有力地提高了勘探质量,是行之有效的一种研究方法。 相似文献
5.
X. J. Li W. M. Yang L. G. Wang I. B. Butler 《Rock Mechanics and Rock Engineering》2014,47(6):2211-2223
Splitting failure, which is recognized as a special engineering geology phenomenon, occurs continually in the brittle rock mass of caverns during underground excavation. In this paper, a splitting model of linear slippage crack groups is built with fracture mechanics, energy analysis, and crack extension theories. Considering intrinsic cracks in rock mass and change of outer stress, intrinsic cracks propagate into macroscopical splitting cracks that are approximately parallel to the side wall of caverns. The splitting criterion of cavern rock mass and the method for predicting displacement in view of splitting opening displacement are proposed. In the end, the forecasting method is applied to the Jinping-I Hydropower Station, underground caverns engineering in China, the splitting failure zone and forecasting displacement are accordant with the monitoring data. The new forecasting displacement method is proven to contribute to the construction of similar underground caverns. 相似文献
6.
Helge Holden Kenneth Hvistendahl Karlsen Knut-Andreas Lie 《Computational Geosciences》2000,4(4):287-322
We present an accurate numerical method for a large class of scalar, strongly degenerate convection–diffusion equations. Important subclasses are hyperbolic conservation laws, porous medium type equations, two-phase reservoir flow equations, and strongly degenerate equations coming from the recent theory of sedimentation–consolidation processes. The method is based on splitting the convective and the diffusive terms. The nonlinear, convective part is solved using front tracking and dimensional splitting, while the nonlinear diffusion part is solved by an implicit–explicit finite difference scheme. In addition, one version of the implemented operator splitting method has a mechanism built in for detecting and correcting unphysical entropy loss, which may occur when the time step is large. This mechanism helps us gain a large time step ability for practical computations. A detailed convergence analysis of the operator splitting method was given in Part I. Here we present numerical experiments with the method for examples modelling secondary oil recovery and sedimentation–consolidation processes. We demonstrate that the splitting method resolves sharp gradients accurately, may use large time steps, has first order convergence, exhibits small grid orientation effects, has small mass balance errors, and is rather efficient. 相似文献
7.
岩体结构面具有明显的各向异性,其直接影响岩体的变形特性、力学特性与渗流特性,因此对结构面的各向异性特征开展量化分析尤为重要。针对不同成因(劈裂、剪切)结构面,利用结构面量化参数(节理粗糙度系数JRC、节理平均倾角θ、分形维数D_B)对其各向异性特征进行了分析,研究了各向异性特征对其剪切力学特性的影响。研究结果表明:(1)在劈裂断裂结构面中,平行劈裂方向的JRC与θ值普遍大于垂直方向,且随角度变化波动较小,D_B在对角线方向变化较大,其值与所取剖面线长度有关;而在剪切断裂结构面中,平行剪切方向的JRC和θ值与垂直方向无明显差别,但D_B同样在对角线方向变化较大;(2)在评价结构面各向异性时,采用θ、D_B等参数评价时,劈裂断裂结构面与剪切断裂结构面各向异性系数无明显差别,采用JRC作为评价参数时,其各向异性系数差异较大,能较好反映不同结构面之间的差异特征;(3)剪切断裂结构面的峰值剪切荷载和法向位移均高于劈裂断裂结构面,两种结构面的剪胀角达到峰值时的剪切位移相近,剪切断裂结构面的开度分布较为集中且普遍较大,劈裂断裂结构面开度分布则较为分散。 相似文献
8.
借助于有限元方法,对裂隙各向异性介质一雏四分量弹性波场中横波双折射的有关问题进行了研究。它们是裂隙方位与相速度,双折射与震源主频,双折射与裂隙丰度,双折射与能量分配,双折射与延迟时,双折射及其振幅谱等。这些问题对深入认识横波双折射特性,对理论和实际工作都有一定帮助。 相似文献
9.
通过分析国内外鄂尔多斯、四川、Fort Worth、Arkoma等盆地373个样品油型气湿度与镜质体反射率的关系,发现随热演化程度升高,油型气湿度变小,二者呈负对数相关关系,油型气湿度与热演化程度的这种负对数相关关系,可为页岩气勘探和天然气资源评价提供科学依据。同时,分析天然气湿度与热成熟度关系曲线图,发现干酪根降解气湿度随着热演化程度升高迅速减小,而裂解气湿度相对稳定,这也证实原油裂解气与干酪根直接降解生气的分子热动力学模型存在较大差异。 相似文献
10.
笔者给出了一种能够模拟弹性波在任意各向异性介质中传播的二维三分量高阶有限差分算法.相对于常规交错网格有限差分方法,旋转交错网格有限差分方法在介质具有强差异性时能更精确地模拟地震波的传播,避免常规交错网格中因对弹性系数进行插值而带来的误差.采用高阶旋转交错网格有限差分方法模拟并分析了零偏移距横波分裂现象随裂缝介质方位角和倾角变化的响应特征.结果表明:结合完全匹配层(PML)吸收边界条件的高阶旋转交错网格有限差分方法能获得高精度的地震波场模拟数据,并且在边界具有良好的吸收效果;横波分裂现象主要受裂缝走向与波的极化方向之间的夹角影响,受裂缝倾角影响较小,且快慢横波的能量也跟裂缝走向与波极化方向间的夹角有关.具有倾斜对称轴的横向各向同性(TTI)介质倾角的变化可能会导致记录中波到达时的变化,影响快慢横波的时差.利用横波分裂的能量分布和方位各向异性特征,可以帮助检测裂缝的方位角和倾角.横波在多层TTI介质中传播时会发生多次分裂的现象. 相似文献
11.
周鹏敏 《水文地质工程地质》2007,34(4):116-120
文章通过对劈裂式灌浆机理的分析,针对各类坝型的特点,从施工方法、灌浆工艺、灌浆参数等方面分别分析了劈裂式灌浆技术在粘土心墙坝、均质风化料坝、砂土坝、石碴坝等坝型中的应用及高水位条件下的灌浆效果,得出结论:劈裂式灌浆技术通过改良施工工艺和浆液比重,可加快施工进度,提高浆脉厚度至20~30cm,具有较高的应用价值。 相似文献
12.
自然铜矿石样品的加工及分析测试方法 总被引：2，自引：0，他引：2
对滇东北地区典型自然铜矿石样品的试验采取、粒度分级过筛、缩分及均匀性试验,认为样品在经过粗碎、中碎后,将颗粒大于2mm的矿物(95%以上为自然铜)用2mm隔筛分离后,余下样品经过棒磨,过0.246mm(60目)筛后进行缩分至常量细碎样品量,再进行0.074mm(200目)样品加工的工艺流程是可行的。样品中铜元素分析方法(原子吸收光谱法、碘量法和碘氟法)的选择符合矿区实际,其经济性、可靠性、准确性能满足地质工作的实际需要。 相似文献
13.
Devajit Hazarika Dilip Kumar Yadav V. Sriram Abhishek Rai 《International Journal of Earth Sciences》2013,102(7):2061-2076
Teleseismic earthquake data recorded by 11 broadband digital seismic stations deployed in the India–Asia collision zone in the eastern extremity of the Himalayan orogen (Tidding Suture) are analyzed to investigate the seismic anisotropy in the upper mantle. Shear-wave splitting parameters (Φ and δt) derived from the analysis of core-refracted SKS phases provide first hand information about seismic anisotropy and deformation in the upper mantle beneath the region. The analysis shows considerable strength of anisotropy (delay time ~0.85–1.9 s) with average ENE–WSW-oriented fast polarization direction (FPD) at most of the stations. The FPD observed at stations close to the Tidding Suture aligns parallel to the strike of local geological faults and orthogonal to absolute plate motion direction of the Indian plate. The average trend of FPD at each station indicates that the anisotropy is primarily originated by lithospheric deformation due to India–Asia collision. The splitting data analyzed at closely spaced stations suggest a shallow source of anisotropy originated in the crust and upper mantle. The observed delay times indicate that the primary source of anisotropy is located in the upper mantle. The shear-wave splitting analysis in the Eastern Himalayan syntaxis (EHS) and surrounding regions suggests complex strain partitioning in the mantle which is accountable for evolution of the EHS and complicated syntaxial tectonics. 相似文献
14.
Tuna Eken Jaroslava Plomerová Roland Roberts Ludek Vecsey Vladislav Babuška Hossein Shomali Reynir Bodvarsson 《Tectonophysics》2010,480(1-4):241-258
Body-wave analysis — shear-wave splitting and P travel time residuals — detect anisotropic structure of the upper mantle beneath the Swedish part of Fennoscandia. Geographic variations of both the splitting measurements and the P-residual spheres map regions of different fabrics of the mantle lithosphere. The fabric of individual mantle domains is internally consistent, usually with sudden changes at their boundaries. Distinct backazimuth dependence of SKS splitting excludes single-layer anisotropy models with horizontal symmetry axes for the whole region. Based upon joint inversion of body-wave anisotropic parameters, we instead propose 3D self-consistent anisotropic models of well-defined mantle lithosphere domains with differently oriented fabrics approximated by hexagonal aggregates with plunging symmetry axes. The domain-like structure of the Precambrian mantle lithosphere, most probably retaining fossil fabric since the domains' origin, supports the idea of the existence of an early form of plate tectonics during the formation of continental cratons already in the Archean. Similarly to different geochemical and geological constraints, the 3D anisotropy modelling and mapping of fabrics of the lithosphere domains contribute to tracking plate tectonics regimes back in time. 相似文献
15.
为研究鄂西北地区板岩的力学特性及各向异性特征,开展了志留系粉砂质板岩的单轴压缩和巴西劈裂试验,分析了试样的力学特性和各向异性特征以及在不同荷载作用下的变形破坏模式,揭示了不同破坏模式的力学机制,并通过数值分析研究了不同板理面角度板岩边坡破坏模式及力学机制。研究结果表明,粉砂质板岩中的板理面是影响岩体力学行为的弱面,使得粉砂质板岩表现出明显的各向异性的特征。在单轴压缩条件下,粉砂质板岩在垂直板理面方向比平行板理面方向更易变形,变形量更大;平行板理面方向加载时试样破坏类型为竖向劈裂型张拉破坏,其实质是压杆失稳;垂直板理面加载时试样的破坏类型为穿切板理面的劈裂型剪切破坏;所测得的力学参数各向异性也较明显。在劈裂荷载作用下,粉砂质板岩的破坏模式主要有张拉劈裂破坏和沿板理面剪切破坏两种,所得抗拉强度在平行板理面方向上最大,在垂直板理面方向上最小,两个方向上的抗拉强度均小于抗压强度。由于板理面间的抗拉强度极低,在受到与板理面呈小角度相交的劈裂荷载作用时,容易产生沿板理面的张拉劈裂或拉剪破坏,在实际工程中应尽量避免板理面间的受拉破坏和沿板理面的拉剪破坏。在边坡工程中,板理面倾向、倾角对边坡破坏模式及力学机制有较大影响,边坡防护治理需充分考虑这一影响。上述研究为粉砂质板岩区岩质边坡防护治理以及其他岩石工程设计与施工提供理论依据与技术基础。 相似文献
16.
The Vienna Atomic Line Database (VALD) has been supplemented with new data and new functionality—the possibility of taking into account the effect of hyperfine splitting (HFS) of atomic levels in the analysis of line profiles. This has been done through the creation of an ancillary SQL database with the HFS constants for atomic levels of 58 isotopes of 30 neutral and singly-ionized atoms. The completeness of the collected data and new opportunities for studies of stars of various spectral types is analyzed. The database enables analysis of splitting of up to 60% of lines with measurable effects in the ultraviolet (λ ≳ 1000 Å ), and up to 100% of such lines in the optical and infrared ranges (λ ≲ 25 000 Å ) for A–M stars. In the spectra of hot O–B stars, it is necessary to use laboratory measurements for atoms in the second and higher stages of ionization.
相似文献17.
Seismic anisotropy structure beneath the southeastern Mediterranean from shear-wave splitting 总被引：1，自引：0，他引：1
Mohamed K. Salah 《Arabian Journal of Geosciences》2013,6(6):1717-1730
Analysis of seismic anisotropy in the crust and the uppermost mantle gives lots of information about the ambient mantle flow, stress state, and the dynamic processes inside the Earth. Thus, seismic anisotropy and its main distinctive features beneath the southeastern Mediterranean region are studied through the analysis of teleseismic shear-wave splitting observed at six broadband seismic stations belonging to the GEOFON and the MedNet. Although the number of the recording stations is small; a total of 495 splitting parameters are obtained, which revealed significant variations in the observed fast polarization directions beneath the study area. The stations in northern Egypt and Cyprus show fast velocity directions oriented roughly N–S to NNE–SSW, coincident with many previous results. A slightly different splitting pattern comprising NE–SW fast polarization directions is observed in the stations located along the Dead Sea fault in the southeastern Mediterranean; which are consistent with the current strike-slip motion between Africa and Arabia. In addition, NW–SE fast polarization directions are recognized in the latter group. The observed delay times vary greatly but their averages lie between 0.35 and 1 s. Although large-scale mechanisms, such as the absolute plate motion of Africa and Arabia towards Eurasia and the differential motion between Arabia and Africa can be invoked to predominantly explain the origin of anisotropic features, we suggest that density-driven flow in the asthenosphere is a possible additional cause of the wide range of the splitting pattern observed beneath some stations. 相似文献
18.
采用交错网格技术将速度-应力方程中的速度对时间的导数转化为应力对空间的导数, 将弹性波动方程表示为与二阶双曲方程等价的一阶应力-速度公式, 以实现三维三分量地震波场模拟。对获得的波场快照、VSP记录图像和地面记录图像进行波场分析, 发现在波场图像中存在明显的拟P波、拟快横波和慢横波, 还出现了横波分裂、横波分裂盲区及波面三分叉等地震波在方位各向异性介质传播时产生的特殊现象。研究结果表明, 用交错网格三维模拟方法研究方位各向异性介质对方位各向异性介质中地震波传播反演能起到很强的辅助作用。 相似文献
19.
主要造岩矿物中位错分解及其流变学意义 总被引：1，自引：0，他引：1
本文首次系统地综述了有关长石、橄榄石、石英和辉石等主要造岩物中位错分解研究的最新成果,探讨位错分解的流变学意义。为了方便读者,本文开始还扼要地介绍了一些位错分解的基本概念。 相似文献
20.
为了模拟岩体中裂纹的萌生、扩展,Munjiza提出了有限元法/离散元法(FEM/DEM)耦合分析方法。因为裂纹是沿单元边界进行扩展的,亦即裂纹扩展具有网格依赖性,为获得较好的裂纹扩展形态,需要划分密集的初始网格。为解决上述难题,基于FEM/DEM耦合分析方法,提出了基于局部单元动态劈裂的FEM/DEM自适应分析方法,以克服裂纹扩展形态对网格的依赖性。该方法在最初建模时无需划分很密的初始网格,随着荷载的施加,对裂纹尖端附近的局部单元进行动态劈裂,为裂纹的后续扩展提供了更多可能的扩展方向,使得裂纹扩展不必沿着初始网格的单元边界扩展,即可以沿着单元内部进行扩展,裂纹扩展形态更为平滑,与实际情况更为接近。同时相对原FEM/DEM耦合分析方法一开始就划分很密的网格而言,新方法可以划分较为稀疏的初始网格,计算成本降低。最后,通过巴西劈裂算例与原FEM/DEM耦合分析方法对比,分析表明,新方法在一定程度上克服了裂纹扩展形态对初始网格的依赖性。 相似文献