共查询到20条相似文献，搜索用时 31 毫秒
1.
系统介绍了一种新型地下水污染治理技术,PRB（可渗透反应墙）技术。阐述了PRB的类型、活性材料的选取、反应机理、PRB的构建、应用实例以及存在问题等。并展望了其今后还需深入研究的方向。认为其是一种非常有发展前景的环境污染修复技术。这将为在我国开展该方法的研究和应用打下基础。 相似文献
2.
《地学前缘(英文版)》2023,14(2):101494
Permeable reactive barriers (PRBs) are used for groundwater remediation at contaminated sites worldwide. This technology has been efficient at appropriate sites for treating organic and inorganic contaminants using zero-valent iron (ZVI) as a reductant and as a reactive material. Continued development of the technology over the years suggests that a robust understanding of PRB performance and the mechanisms involved is still lacking. Conflicting information in the scientific literature downplays the critical role of ZVI corrosion in the remediation of various organic and inorganic pollutants. Additionally, there is a lack of information on how different mechanisms act in tandem to affect ZVI-groundwater systems through time. In this review paper, we describe the underlying mechanisms of PRB performance and remove isolated misconceptions. We discuss the primary mechanisms of ZVI transformation and aging in PRBs and the role of iron corrosion products. We review numerous sites to reinforce our understanding of the interactions between groundwater contaminants and ZVI and the authigenic minerals that form within PRBs. Our findings show that ZVI corrosion products and mineral precipitates play critical roles in the long-term performance of PRBs by influencing the reactivity of ZVI. Pore occlusion by mineral precipitates occurs at the influent side of PRBs and is enhanced by dissolved oxygen and groundwater rich in dissolved solids and high alkalinity, which negatively impacts hydraulic conductivity, allowing contaminants to potentially bypass the treatment zone. Further development of site characterization tools and models is needed to support effective PRB designs for groundwater remediation. 相似文献
3.
Hexavalent chromium is a soluble, mobile, and highly toxic metal ion in groundwater. Adsorption by permeable reactive barriers (PRBs) with special sorbent is a common method to remove hexavalent chromium. A series of experiments have been performed to remove hexavalent chromium in groundwater under PRB with modified chitosan. Therefore, in this paper, the authors first estimated adsorption characteristics of the modified chitosan in a column test, and then calibrated the PRB adsorption parameters in a sandbox test, and finally designed an optimal width, length, and depth of the PRB with the same reactive media in a three-dimensional aquifer. The results showed that the modified chitosan might be a potential adsorption medium. The design schemes can meet the water quality standard of 0.1 mg/L Cr(VI). Heterogeneity of dispersion is a crucial factor when designing the PRB. Therefore, the design of the PRB structures can be appropriate and serve as reference for groundwater remediation. 相似文献
4.
渗透反应格栅(permeable reactive barrier,PRB)在国外被广泛应用于场地尺度的地下水污染修复,因其无须外源动力、不占地面空间、运行成本低等优势在国内受到广泛关注。不同场地水文地质条件、污染物类型、污染羽分布具有差异性,前期场地调查、反应材料的筛选、反应墙尺寸结构的设计对于PRB的有效运行至关重要。本文以PRB修复河南某Cr(Ⅵ)污染场地为例,详细阐述场地调查、材料筛选、材料反应参数确定、PRB结构优化等方面的研究过程及成果,可为后续PRB修复技术的应用提供参考。研究结果表明:PRB修复技术适用于该场地,铸铁与活性炭混合材料为最佳修复材料;反应门长40 m(反应材料厚2 m,上下游分别为2 m厚砾石层),东西两侧隔水墙长为60 m的U型漏斗-门系统型PRB,可有效捕获并修复污染羽,工程成本远低于连续反应墙式PRB,为该场地修复最优PRB结构类型。 相似文献
5.
6.
可渗透反应墙（Permeable Reactive Barrier,PRB）技术是原位地下水或者土壤修复中最受瞩目的技术之一,该技术设计和安装的首要关键问题就是反应墙的厚度计算.现有的反应墙设计方法大部分只考虑了单一污染物或者反应墙本身,很少考虑多种污染物的存在以及含水层水力性质的实际情况.聚焦于可渗透反应墙中的PCE（四氯乙烯）链式降解过程,基于可渗透反应墙-含水层的多域多组分污染物的体系建立了一维条件下的对流弥散方程,通过借鉴相关文献提出的转换算法得出方程解析解,并由此推导出适合多组分污染物体系的反应墙厚度公式,利用软件COMSOL建立了数值模型验证了其正确性.对比已有的Rabideau模型发现:计算反应墙厚度时不能完全忽略含水层的自然衰减反应,尤其当达标面远离反应墙出口处时;对于多种组分皆来源于同一种母源反应物的污染物,计算反应墙厚度时边界条件十分关键.本文模型的解析解可以为可渗透反应墙的设计和安装提供建设性的意见,还可以快速分析多组分污染物的分布和预测,为地下水的修复工程、风险评估、后期监测控制提供了计算的支撑. 相似文献
7.
8.
地下水中氯代烃的格栅水处理技术 总被引：19，自引：1，他引：19
挥发性氯代烃是地下水中检出率较高的有机污染物 ,同时也是饮用水氯气消毒的副产物 ,而它对人体的危害也已经得到了USEPA等机构的认同。文中主要从格栅材料、降解机理、影响还原性脱氯效率的因素、实际工程中应注意的问题以及发展方向等方面 ,对地下水中挥发性氯代烃的处理技术进行了阐述 ,介绍了格栅处理地下水中挥发性氯代烃的最新进展和实际意义 ,提出了格栅系统的实际应用潜力和存在的问题 ,特别是双金属系统的催化机理和催化剂失活问题 ,给国内这方面的研究者提供思路。 相似文献
9.
可渗透反应墙（PRB）是一种高效的地下水污染原位修复技术。不同水文地质条件下，污染场地墙体位置布设合理性影响其修复效果，而利用地下水数值模拟可实现墙体位置优化。文章以某Cr6+污染地下水场地为例，基于Visual Modflow建立了研究区平面二维稳定流数值模型，并通过模型检验。根据墙体的设计尺寸（长20 m×宽2 m×深12 m）及填充材料的渗透系数（80 m/d），利用所建模型分别计算了4种布设方案（墙体尺寸大小和填充材料渗透系数相同，布设位置不同）下墙体的捕获区宽度、粒子滞留时间和通过墙体的Cr6+通量。结果表明:4种布设方案模拟的滞留时间和捕获区宽度取值差异性不大，变异系数小于2%；Cr6+通量差别较大，变异系数高达76.32%，主要由地下水中Cr6+浓度空间分布不均引起。对比分析4种方案的各评价指标，方案2求得的捕获区宽度为21.9 m，粒子滞留时间为4.1 d，Cr6+去除量可达127.7 mg/d，可作为最佳布设方案。本研究建立的地下水流数值模型符合场地实际情况，可有效评估PRB截获污染羽的范围和去除目标污染物的能力，为铬渣类污染场地PRB原位修复工程设计与实施提供技术支撑和参考依据。 相似文献
10.
Alexandra N. Golab Mark A. Peterson Buddhima Indraratna 《Environmental Earth Sciences》2009,59(1):241-254
The Shoalhaven region of NSW experiences environmental acidification due to acid sulphate soils (ASS). In order to trial an
environmental engineering solution to groundwater remediation involving a permeable reactive barrier (PRB), comprehensive
site characterisation and laboratory-based batch and column tests of reactive materials were conducted. The PRB is designed
to perform in situ remediation of the acidic groundwater (pH 3) that is generated in ASS. Twenty-five alkaline reactive materials
have been tested for suitability for the barrier, with an emphasis on waste materials, including waste concrete, limestone,
calcite-bearing zeolitic breccia, blast furnace slag and oyster shells. Following three phases of batch tests, two waste materials
(waste concrete and oyster shells) were chosen for column tests that simulate flow conditions through the barrier and using
acidic water from the field site (pH 3). Both waste materials successfully treated with the acidic water, for example, after
300 pore volumes, the oyster shells still neutralised the water (pH 7). 相似文献
11.
This study focuses on coupling geochemistry with geo-hydraulics to enable time-dependent modelling of the remediation of acidic groundwater using an alkaline permeable reactive barrier (PRB). Chemical clogging due to secondary mineral precipitates reduces the porosity and hydraulic conductivity of the reactive medium. The governing equations are incorporated into commercial numerical codes, MODFLOW and RT3D. An original algorithm was developed for RT3D to simulate geochemical reactions occurring in the PRB. The results and the model predictions are in agreement, confirming that the hydraulic conductivity reduction due to mineral precipitation occurs at the start of permeation and continues until halfway through the testing phase. 相似文献
12.
为进一步研究地下水曝气原位修复技术的影响因素,采用室内实验的方法系统地研究了含水介质对原位曝气技术修复地下水污染的影响。研究结果表明:大量水相中的柴油在曝气的开始阶段被去除,随着时间的延长,污染物去除率不断增加,但增加的幅度逐渐减小。污染物去除率与时间关系曲线符合对数曲线规律,相关方程为y=alnx+b,R2=0.802 4～0.907 1,相关性较好。含水介质的渗透系数对地下水污染修复的影响较大,渗透系数与污染物的去除率基本呈正相关关系,渗透系数越大,污染物的去除率越大;含水介质密度与污染物去除率基本呈负相关关系,含水介质密度越大,污染物的去除率越小。 相似文献
13.
14.
地下水污染场地风险管理与修复技术筛选 总被引：4，自引：0，他引：4
赵勇胜 《吉林大学学报(地球科学版)》2012,42(5):1426-1433
国际上对于地下水污染场地的控制与修复研究已经取得了许多成果,已有成功的修复实例。我国虽然起步晚,但非常重视地下水污染的防治,开展了全国范围的地下水污染调查,并进行了地下水污染的防治规划。地下水污染的控制与修复已经逐渐进入示范性研究阶段。面对地下水污染场地风险管理的不同方法,以及众多的污染修复技术,如何制定风险管理策略,如何在各种各样的修复技术中筛选合适的技术或技术组合,对于地下水污染场地的防治具有非常重要的意义。笔者分析了发达国家地下水污染风险管理策略,结合在地下水污染场地研究方面的经验,对一些主要的地下水污染修复技术进行了分析论述,提出了考虑污染物特征、场地水文地质条件的地下水污染修复技术的筛选过程和方法。 相似文献
15.
Paul F. Hudak 《Environmental Earth Sciences》2017,76(19):667
A groundwater flow and contaminant transport model was used to simulate arrays of non-pumped wells with reactive media for remediating contaminated groundwater. Each array featured a minimum number of wells, with identical diameter, capable of removing a contaminant plume within a hypothetical site. Simulated well diameters ranged from 0.25 m (similar to typical remediation wells) to 1.25 m (similar to large-diameter, bucket-augered wells). Both arrays occupied a linear transect located approximately 5 m downgradient of the front of a polluted enclave and oriented 90° to the hydraulic gradient. The minimum smallest diameter array contained 23 wells, whereas the minimum largest diameter array contained only four wells. Results of this study suggest that bucket-augering technology, adapted to install non-pumped wells with reactive media, may be an effective alternative for remediating contaminated groundwater in some environments. 相似文献
16.
《Geomechanics and Geoengineering》2013,8(3):201-208
The oxidation of sulphides in acid sulphate soils (ASS) causes the acidification of many Australian coastal river systems. The acidity negatively impacts upon coastal ecosystems, aquaculture, agriculture and concrete and steel infrastructure. In the low-lying floodplains, relatively deep surface drains fitted with one-way floodgates lower the watertable, thereby exposing the sulphidic minerals to oxidation. On the Broughton Creek floodplain in SE Australia, four distinct remediation strategies have been developed to tackle the issue of acidification by ASS: (i) simple V-notch weirs that raise the level of the watertable surrounding the drains thereby submerging the pyrite and preventing the further formation of acidity; (ii) modified two-way floodgates that allow the inflow of tidal water into the drains, thereby buffering the acidity within the drain before it enters the river and raising the level of the watertable surrounding the drain; (iii) lateral impermeable lime barriers that both prevent oxidation of pyrite by stopping the downward movement of oxygen into the soil and neutralise the acidity in the groundwater; and (iv) permeable reactive barriers (PRB) that passively intercept the groundwater flow and neutralise the acidity. Each remediation strategy has a distinct role to suit the different terrain and groundwater conditions. 相似文献
17.
Nowadays, permeable reactive barriers (PRB) are one of the most widespread techniques for the remediation of contaminated aquifers. Over the past 10 years, the use of iron-based PRBs has evolved from innovative to accepted standard practice for the treatment of a variety of groundwater contaminants (ITRC in: Permeable reactive barriers: lessons learned/new directions. The Interstate Technology and Regulatory Council, Permeable Reactive Barriers Team 2005). Although, a variety of excavation methods have been developed, backhoe excavators are often used for the construction of PRBs. The aim of this study is to describe the emplacement of a full-scale PRB and the benefits deriving from the use of a crawler crane equipped with a hydraulic grab (also known as clamshell excavator) in the excavation phases. The studied PRB was designed to remediate a chlorinated hydrocarbons plume at an old industrial landfill site, in Avigliana, near the city of Torino, in Italy. The continuous reactive barrier was designed to be 120 m long, 13 m deep, and 0.6 m thick. The installation of the barrier was accomplished using a clamshell for the excavation of the trench and a guar-gum slurry to support the walls. The performance of this technique was outstanding and allowed the installation of the PRB in 7 days. The degree of precision of the excavation was very high because of the intrinsic characteristics of this excavation tool and of the use of a concrete curb to guide the hydraulic grab. Moreover, the adopted technique permitted a saving of bioslurry thus minimizing the amount of biocide required. 相似文献
18.
19.
Visualizing complex pore structure and fluid flow in porous media using 3D printing technology and LBM simulation 
下载免费PDF全文
下载免费PDF全文 Pore structures of porous media and properties of fluid flow are key factors for the study of non-Darcy groundwater flow. However, it is difficult to directly observe pore structures and flow properties, resulting in a “black box” problem of porous media. This problem has hindered the in-depth study of the groundwater flow mechanism at the pore scale. In recent years, 3D rapid prototyping technology has seen tremendous development. 3D printing provides digital models and printing models of porous media with clear internal structure. Thus, Lattice Boltzmann Method can be used to simulate the flow processes at the pore scale based on real pore structures. In this study, 3D printing cores and Lattice Boltzmann Method were coupled to conduct both laboratory and numerical experiments in spherical porous media with different sphere diameters and periodic arrays. The LBM simulation results show a good agreement with laboratory experimental results. With the advantages of LBM and 3D printing, this approach provides a visualization of the complex pore structure and fluid flow in pores, which is a promising method for studies of non-Darcy groundwater flow at the pore scale. 相似文献
20.
污染物事故性排放、工矿企业搬迁后遗留的污染场地修复面临各种问题,给地下水资源的使用带来严重威胁。地下水VOCs污染,具有易扩散迁移、毒性高、风险大的特点,修复难度较高。本文结合典型深层地下水修复案例,充分分析场地地质背景、水文地质条件等,根据污染物的特性、污染范围和分布特征,探讨各种修复技术的修复机理、修复对象和技术特点,针对VOCs污染修复进行性能比较及适用性分析。同时通过两个阶段的试验综合研究,原位和异位技术相结合,为开展类似地下水VOCs污染修复实践和管理提供了依据和思路。 相似文献