共查询到20条相似文献，搜索用时 31 毫秒
1.
川东北飞仙关组白云岩岩石结构演化 总被引：1，自引：1，他引：0
根据矿物结晶学理论,白云石可按照晶体大小和晶边形貌划分为不同的结构,其结构的演化主要受原岩化学组成、岩石结构和白云岩化流体的影响。白云岩原岩可分为不同化学组分的泥灰岩和含颗粒泥灰岩,泥灰岩可细分为成分均匀的和含溶孔、胶结物的泥灰岩;含颗粒泥灰岩可细分为未接受任何改造的、发生溶蚀胶结作用的和发生泥晶化等作用的含颗粒泥灰岩。以川东北飞仙关组白云岩为例,在不同浓度的白云岩化流体条件中,讨论不同结构白云岩岩石的演化。结果表明：泥晶化及溶蚀作用是白云石岩石结构演化和形成的基础;大多数鲕粒白云岩在低浓度白云岩化溶液中形成;糖粒状白云岩为外来高浓度的白云岩化流体改造形成。 相似文献
2.
Teunis A. P. Kwak 《Contributions to Mineralogy and Petrology》1974,44(1):57-80
Existing staurolite breakdown reactions are briefly discussed and examples of each of the main types suggested from textural evidence from different well studied areas are analyzed. From the staurolite textural data, it is shown that: the pseudomorphic replacement is generally equal area; the replacement is usually by a single mineral or, where a number occur, one volumetrically greatly predominates; and successive reaction coronas exist around a single reactant grain. The analogy between the textural coronas and “monomineralic zones” at the contact of dissimilar rock types is drawn with the subsequent inference that reaction coronas in some, if not most, cases are out of equilibrium with the rest of the assemblage as well as the reactant mineral. In staurolite reaction textures, different grains in a single thin section normally have: different amounts (ratios) of product minerals, different product minerals, some grains which have reacted while others have not and different grains which have reacted to different degrees. Traverses of essentially total chemical analyses across staurolite grains in two test sections showed that considerable intertextural chemical variation in single thin sections exist which is much greater than the chemical variations within textures. Variations of, from 0.59 to 1.86 weight percent ZnO in different homogeneous staurolite grains occur in a single thin section (Z-5670911) and measurable variations of Si, Al, Fe, Mg and Mn are recorded. In all the textures analyzed both Zn and Al was deficient on the product side of balanced reactions, and particularly Zn can be shown to have been lost from the area of the section. The chemical and textural conclusions show that the limits of equilibrium systems, from which metamorphic reactions can be inferred, must be confined to the boundaries of the pseudomorphic texture, which means that ionic (complex bearing ?) species are involved and these systems must be treated as being open. 相似文献
3.
C. J. A. SOUTENDAM 《Sedimentology》1967,8(4):281-290
For the study of the surface textures of quartz sand grains the normal microscope was used, besides the sofar generally applied electron microscope, and a new method was developed for using incident illumination. Grains from a desert sand and a river sand were studied, the former grains displayed textures not described yet by previous authors, the latter grains possessed a variety of textures, some of which have been found with beach sand grains, others with glacial sand grains by previous investigators. 相似文献
4.
Surface textures of quartz grains from fault gouges are examined by means of the scanning electron microscope. It is disclosed that the surface morphology of the grains is variable, but quartz grains extracted from one fault gouge sample commonly show a type of texture different from those observed on the grains from the other samples. The surface textures observed under the microscope are tentatively classified into eight types; subconchoidal, orange peel-like, fish scale-like, moss-like, moth-eaten, stalactitic, pot-hole, and coral-like textures. These textures can be classified into four groups. Arranged in the order of their apparent features, it is interpreted that the progressive corrosion of quartz grains by ground water has taken place after faulting. The change of this surface feature can assist in estimating the time elapsed since the last fault activity. 相似文献
5.
DANIELA FONTANA 《Sedimentology》1991,38(6):1085-1095
The Upper Cretaceous Pietraforte Formation, an allochthonous unit of the Ligurian domain in the northern Apennines, provides a case study of the importance of detrital carbonate grains for provenance determination in sandstones. The Pietraforte Formation is composed of turbidite sandstones with subordinate conglomerate, deposited in an external sector of the Ligurian ocean, close to the Adriatic margin. The sandstones have a lithic composition, characterized by abundant sedimentary and metasedimentary rock fragments (35–56% of the terrigenous framework), little feldspar (<7%) that is almost exclusively plagioclase, and a high ratio of fine- to coarse-grained polycrystalline quartzose grains to total quartzose grains (average Qp/Qt=0.37). Carbonate rock fragments dominate the lithic association of both sandstones and conglomerates and provide the most detailed information for provenance determination. They are composed primarily of dolostones and a wide variety of limestones containing identifiable age-diagnostic microfossils. Fossils and rock textures of carbonate clasts document the erosion of Upper Triassic to Lower Cretaceous shelf and pelagic carbonate units which can be matched with Mesozoic rock types present in the Tuscan domain of the northern Apennines. Compositional results constrain the source of the Pietraforte Formation sandstones to the western margin of the Adriatic plate, from uplifted sedimentary and metasedimentary rocks of the Tuscan domain and its low-grade metamorphic basement. Coeval intrabasinal sources provided additional supplies to the depositional basin of the Pietraforte Formation; this intrabasinal supply consists of shelf carbonate allochems, planktonic foraminifera and argillaceous rip-up clasts. The presence of carbonate grains from shallow-water environments may indicate the existence during deposition of marginal shelf areas favourable for carbonate allochem production. 相似文献
6.
Two experiments using cylindrical samples of a dolomite-quartz rock were carried out in a conventional hydrothermal apparatus for the forward reaction: 1 dolomite + 2 quartz = 1 diopside + 2 CO2, in order to compare the mechanism and the kinetics with results from experiments using mineral powders of dolomite and quartz at the same P-T-X conditions. Experimental conditions were as follows: total pressure 500 MPa; temperature 680° C (overstepping 65° C); CO2 content of the fluid phase, consisting of carbon dioxide and water, was nearly 90 mol%; the fluid/rock ratio was 1:37, and the H2O/rock ratio was about 1:740; run duration was 92 days. Scanning electron microscope (SEM) examination of a polished axial section of the rock cylinders after the run, using back-scattered electrons (BSE), shows that the reaction produced corona textures. The diopside crystals nucleate and grow exclusively on dolomite surfaces adjacent to quartz grains, i.e. in regions where there is intimate contact between the reactants. The dolomite matrix, in contrast, is diopside free. A concept of microsystems is used to compare directly the rock cylinder results with those from runs done with mineral powders. The microsystems, which consist of quartz, dolomite and diopside, are connected by the intergranular space which is filled by the fluid phase. The SEM analysis of the rock cylinders indicates a dissolution-crystallization mechanism operating in the microsystems; this is consistent with the results of experiments using dolomite quartz powders (Lüttge et al. 1989). It can be demonstrated that reaction kinetics in mineral powder runs are interface controlled as long as the newly formed diopside crystals do not cover the dolomite surfaces completely (Lüttge and Metz 1991 c). This result is applicable to each microsystem of the rock cylinder, since the reaction mechanism and the resulting textures are the same in both kinds of experiments. The reaction is much slower outside the microsystems, i.e. in the dolomite matrix but in the close vicinity of the quartz grains. At these places, the reaction is controlled by the transport of Si-species in the CO2-rich fluid phase filling the intergranular space. The reaction is absent in quartz-free regions of the dolomite matrix. Calculations and measurements of the extent of reaction progress in both kinds of experiments give results of the same order of magnitude: the conversion, and therefore the reaction rate, differs by less than a factor of two. The conclusion is that there are no differences, in principle, concerning mechanisms, rate controls, rates, and resulting textures between rock cylinder experiments, and mineral powder experiments. 相似文献
7.
Origin of the Pegmatitic Pyroxenite in the Merensky Unit, Bushveld Complex, South Africa 总被引：2，自引：1，他引：2
The genesis of the pegmatitic pyroxenite that often forms thebase of the Merensky Unit in the Bushveld Complex is re-examined.Large (>1 cm) orthopyroxene grains contain tricuspidate inclusionsof plagioclase, and chains and rings of chromite grains, whichare interpreted to have grown by reaction between small, primaryorthopyroxene grains and superheated liquid. This superheatedliquid may have been an added magma or be due to a pressurereduction as a result of lateral expansion of the chamber. Therewould then have been a period of non-accumulation of grains,permitting prolonged interaction with the crystal mush at thecrystal–liquid interface. Crystal ageing and grain enlargementof original orthopyroxene grains would ensue. Only after thepegmatitic pyroxenite had developed did another layer of chromiteand pyroxenite, with normal grain size, accumulate above it.Immiscible sulphide liquids formed with the second pyroxenite,but percolated down as a result of their density contrast, evenas far as the footwall anorthosite in some cases. Whole-rockabundances of incompatible trace elements in the pegmatiticpyroxenite are comparable with or lower than those of the overlyingpyroxenite, and so there is no evidence for addition and/ortrapping of large proportions of interstitial liquid, or ofan incompatible-element enriched liquid or fluid in the productionof the pegmatitic rock. Because of the coarse-grained natureof the rock, modal analysis, especially for minor minerals,is unreliable. Annealing has destroyed primary textures, suchthat petrographic studies should not be used in isolation todistinguish cumulus and intercumulus components. Geochemicaldata suggest that the Merensky pyroxenite (both pegmatitic andnon-pegmatitic) typically consists of about 70–80% cumulusorthopyroxene and 10–20% cumulus plagioclase, with a further10% of intercumulus minerals, and could be considered to bea heteradcumulate. KEY WORDS: Bushveld Complex; Merensky Reef; pegmatitic textures; cumulate processes; heteradcumulates; recrystallization; incompatible trace elements 相似文献
8.
Fracturing mode analysis and relative age dating of faults by surface textures of quartz grains from fault gouges 总被引：5，自引：0，他引：5
Yuji Kanaori 《Engineering Geology》1983,19(4):261-281
Surface textures of quartz grains taken from about 250 samples of fault gouges in faults ranging in length from several metres to several tens of metres with the faults extending several tens to several hundreds of kilometres in length, are examined by means of the scanning electron microscope and are categorized into four groups from I to IV, based on the smoothness of the surface, degree of undulation and development of cavities, as mentioned in a previous paper. Based on surface features of quartz grains from faults the geological age of movement of which is known, the groups I to IV are tentatively related to the age of formation of quartz grains and the period of formation of surface textures. This correlation makes it clear that quartz-grain surface textures are an important clue to dating a relative age of faulting. River patterns, striations, granular fracture surfaces, and dimple-like textures are observed to appear on less corroded surfaces of quartz grains from fault gouges. Fractographic analysis of these surfaces of quartz grains should be a clue to revealing the mode of fracture of the fault movement which released the quartz grains into the fault gouge. 相似文献
9.
Collin Nkono Olivier Fmnias Annick Lesne Jean‐Claude Mercier Fadimatou Yamgouot Ngounouno Daniel Demaiffe 《Geological Journal》2016,51(5):748-759
As rock textures reflect the physical conditions and the mechanisms of formation of the rocks, new approaches are used for improving texture analyses, both qualitatively and quantitatively. Pioneer work has recently boosted interest in fractal analysis for quantifying and correlating patterns. Fractal‐like patterns relate to a degree of multiscale organization, and fractal dimensions (FD) and their potential variations can be used to infer the physical conditions of rock formation at various scales of observation. Here, we characterize quantitatively the shape and distribution of orthopyroxene grains in ultramafic xenoliths in terms of FD and their relation with temperature of equilibration. Fractal analysis has been applied to several populations of mantle xenoliths: 7 xenoliths collected in the vicinity of Pico Santa Isabel on Bioko Island, an alkaline basaltic volcano in oceanic domain (Gulf of Guinea, Equatorial Atlantic), 9 samples from Sangilen, in the Agardag alkaline lamprophyre dyke (Russia), and 11 samples form Śnieżnik (Lutynia, Poland), in the continental domain. Fractal analysis has been conducted to characterize the degree of complexity of the petrographic textures: it is indeed known that large values of FD are associated to more complex textures. The correlation here observed between the orthopyroxene fractal dimension and the temperature of equilibration suggests that FD captures a significant textural feature directly related to the temperature (i.e. generated by a temperature‐controlled process). The significant difference in the FD–T correlation observed for the continental and oceanic mantle domains suggests that the mechanical and rheological behaviour is distinct in the oceanic and continental lithospheres. These first promising results should be confirmed by analysing other mantle suites of rocks in different geodynamic settings. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
10.
11.
X射线荧光光谱-电子探针在中酸性火山岩鉴定中的应用 总被引：2，自引：1，他引：1
中酸性火山岩多具斑状结构,基质可见微晶状结构、隐晶状结构、玻璃质结构等,由于基质矿物颗粒多细小,常用的偏光显微镜受放大倍数的限制,很难准确鉴定矿物种属及含量,这类岩石仅依靠偏光显微镜分类命名会存在误差。本文采用X射线荧光光谱(XRF)、电子探针(EMPA)和偏光显微镜下观察相结合的方法,对中酸性火山岩进行鉴定。结果表明:对于基质呈隐晶质、显微晶质的中酸性火山岩,基质特征相似,偏光显微镜下无法确定长石、石英的含量,因此无法对岩石准确命名;再通过XRF进行主量元素分析,并对分析结果进行标准矿物QAPF双三角图解分类、TAS图解分类及李氏火山岩定量分类,对比结果显示三种分类命名方法存在差异;通过电子探针对矿物进行校验显示,QAPF及李氏火山岩定量分类图解与显微镜下鉴定相符,TAS图解与其他分析结果存在一定偏差。因此,对于中酸性火山岩准确命名,应采用多种分析方法相结合的方式,避免测试单一引起的误差。 相似文献
12.
The re-use of rock as an industrial material requires more treatments than those foreseen for the reuse of muck as an aggregate for concrete and for road construction. The treatments always start with comminution, which has the goal of liberating the rock-forming minerals. Liberation is achieved with the appearance of grains which are composed of only one mineral. The subsequent treatment steps are based on the physical–mechanical–chemical properties of the different minerals, that is, density, magnetic susceptibility, wettability etc. Magnetic separation and flotation, the two techniques examined in this research, are the two most common techniques used in industrial mineral production plants. The mucks that were analysed are from the Omegna and Brennero tunnels, both of which are granitic rocks with different textures. From the analysis and comparison of the preliminary treatment results, it has been possible to optimise the treatment method. Petrographic, mineralogic and firing tests have been conducted to evaluate the obtained results. High-gradient magnetic separation (HGMS) on defined grain sizes appears to be suitable to obtain a product with a high feldspar–quartz content which could be used in the ceramic field. 相似文献
13.
岩石显微构造分析现代技术——EBSD技术及应用 总被引：10，自引：0，他引：10
EBSD技术的发展,为岩石显微构造分析开辟了一个全新的领域。它与现代扫描电子显微镜和能谱分析等设备配合,可以同时对块状样品进行晶体结构与成分分析,从而使显微构造、微区成分与结晶学数据分析有机结合起来。
EBSD技术可以精确、快速定量标定包括各种晶系晶体颗粒的晶格方位和描述晶体颗粒的边界、形态等特征,对于具有低角度边界的晶体颗粒提供精确数据,为阐述岩石变形机制提供重要约束,并为高级晶族和不透明矿物结晶学组构与变形机制研究提供了有效的手段。EBSD尤其使获取微米级甚至纳米级尺度上颗粒（亚颗粒）或相之间的定向差别（达到20 nm的空间分辨率和0.3度角度分辨率）成为可能。EBSD技术在矿物相鉴定、亚微域内的应变分析、矿物出溶作用等方面的应用,进一步证明了这一新技术在显微构造分析及相关领域的应用前景。其广泛应用必将带来岩石显微构造研究的新突破,也将成为未来岩石变形机制与岩石圈流变学研究取得飞速发展不可或缺的技术手段。 相似文献
14.
Thin section and S.E.M. textural criteria for the recognition of cement-dissolution porosity in sandstones 总被引：1，自引：0，他引：1
Cement-porosity relationships are described from the Lower Triassic Sherwood Sandstone Group and the Middle Jurassic Ravenscar Group in the United Kingdom. Calcite cemented sandstones display a variety of replacement textures, with preferential replacement of grains and of overgrowth faces with high free-surface energy. Dolomite and siderite cemented sandstones display similar textures but replacement is less specific and euhedral overgrowth surfaces are commonly embayed by carbonates. Examination of the more porous sandstones with the scanning electron microscope reveals a range of pitting and embayment textures in authigenic overgrowths and in detrital grains. These range from small ‘v’-shaped notches and pits, through regular and irregular shaped embayments, into large depressions. These textures appear to be morphologically similar to the quartz surfaces seen in thin sections of carbonate cemented sandstones, and are interpreted to have been formed by the dissolution of pore-filling and grain replacive authigenic carbonates. This is confirmed by examination of experimentally exhumed overgrowth surfaces from carbonate cemented sandstones. These textures indicate that part of the intergranular porosity in these sediments is secondary in origin, and has been generated by the dissolution of carbonate cements. The identification of such textures may lead to a more confident interpretation of the nature of intergranular porosity in the subsurface. 相似文献
15.
秦岭大别碰撞造山带中隆升最高的结晶基底便是大别杂岩，在超高压变质岩和某些高级变质岩中均发现典型的近等温减压（ＩＴＤ）型的退变质结构，多呈后成合晶或冠状体的形式取代或包绕原生矿物晶粒（主晶），显示退变质不平衡反应的过程．然而超高压变质岩与大别杂岩中的高级变质岩，变质地温梯度截然不同，暗示它们形成的构造条件极不相同，超高压变质岩早期由岩石圈深处（１２０ｋｍ±）折返到下地壳与那里的高级变质岩构造混合，平行并置，而后才一起隆升．退变质不平衡结构与寄主岩的面理无关，说明这种近等温的减压退变质作用发生于后造山时期近绝热条件下的隆升体制，近绝热隆升的热源可能是中生代以来大别山地区岩石圈减薄所引起 相似文献
16.
J. M. Scott J. M. Palin A. F. Cooper M. W. Sagar A. H. Allibone A. J. Tulloch 《Contributions to Mineralogy and Petrology》2011,161(5):667-681
Previous U–Pb zircon dating of the Pomona Island Granite (PIG) pluton (South Island, New Zealand) yielded either Permo-Carboniferous
or Late Jurassic ages for five samples essentially indistinguishable in their field, petrographic, and geochemical characteristics.
Detailed cathodoluminescence imaging and LA-ICP-MS dating of zircon in new and previously dated samples reveal that portions
of the pluton contain either delicately oscillatory-zoned Late Jurassic zircon grains with rare Permo-Carboniferous cores,
or Permo-Carboniferous grains with ubiquitous but thin Late Jurassic rims. Based on zircon dissolution-overgrowth textures,
zircon rim and core trace element compositions, and the limited extent of sub-solidus rock recrystallisation textures, the
bipartite age distribution is unlikely to reflect variable Pb-loss or metamorphic re-equilibration. Magmatic Zr-saturation
temperatures were ≥851°C for samples dominated by Jurassic zircon and ≤809°C for samples with a predominance of Permo-Carboniferous
zircon. Together, these data are consistent with PIG magmas having been derived from partial melting of a Permo-Carboniferous
felsic igneous source at variable temperature wholly in the Late Jurassic (157 ± 3 Ma). The lowest temperature melts would
have been incapable of dissolving significant amounts of pre-existing zircon and consequently generated inheritance-rich magmas,
with the very thin rims on the pre-existing zircon grains the only evidence of the Late Jurassic magmatic age. As the partial
melting temperature increased and nearly all pre-existing zircon grains dissolved into the magma, an inheritance-poor batch
of melt was generated, which precipitated new zircon grains upon crystallisation. Concentrations of major and many trace elements
in both magma batches may have been buffered by retention of residual quartz and feldspar in the source, which would explain
the limited geochemical differences between inheritance-rich and inheritance-poor portions. 相似文献
17.
Effective bulk composition changes due to cooling: a model predicting complexities in retrograde reaction textures 总被引：11，自引：1，他引：11
Kurt Stüwe 《Contributions to Mineralogy and Petrology》1997,129(1):43-52
Diffusive processes are a strong function of temperature. Thus, during cooling of rocks, mineral grains may develop zoning
profiles as successively larger parts of the grain “close” to the diffusive exchange with the rock. One of the consequences
of this process is that, during cooling, successively larger parts of zoned minerals (depending on grain size) are effectively
removed from the reacting part of the rock volume. Thus, the effective bulk composition of metamorphic rocks changes during
cooling and the rate of its change will be a function of grain size. Because the sequence of metamorphic reactions seen by
a given rock is a strong function of its bulk composition, this process may have the consequence that two rocks of identical overall bulk composition, but of different grain size, may experience a different sequence of reactions. Qualitatively identical peak paragenesis may therefore react to form qualitatively different retrograde reaction textures. The model is applied to examples in the pelitic system. There, garnet is usually the slowest
diffusing phase developing zoning profiles during cooling and the effective removal of garnet from the reacting rock volume
will cause changes of the effective bulk composition. It is shown that, during cooling of pelitic rocks from amphibolite facies
conditions, typical aluminous peak parageneses of garnet-muscovite-kyanite ± biotite may react to form either staurolite,
chlorite or muscovite (or different combinations thereof), depending on grain size. During cooling from the granulite facies,
aluminous peak parageneses of garnet-cordierite-sillimanite may form biotite, either on the expense of cordierite or garnet,
also depending on grain size. The two examples are illustrated with a series of reaction textures reported for amphibolite
and granulite terrains in the literature.
Received: 12 March 1996 / Accepted: 7 April 1997 相似文献
18.
Intense post-depositional alteration has profoundly affected sandstones in the volcanic portions of Early Archaean (3·5–3·3 Ga) greenstone belts. The mineralogy and bulk compositions of most grains have been completely destroyed by pervasive metasomatism, but grain textures are commonly well preserved. Consequently, microtextural information coupled with present alteration compositions as determined petrographically can be used to estimate original framework modes. Silicified Early Archaean volcaniclastic sandstones assigned to the Panorama Formation and Duffer Formation, Warrawoona Group, eastern Pilbara Block, Western Australia, were originally composed of volcanic (VRF) and sedimentary (SRF) rock fragments, volcanic quartz, feldspar, traces of ferromagnesian minerals and pumice. Only volcanic megaquartz remained stable during alteration. All other primary components were replaced by granular microcrystalline quartz (GMC) and sericite. In most areas, the sandstones were composed of dacitic to rhyolitic VRFs, now totally replaced by sericite-poor GMC and recognized by preserved microporphyritic textures. In a few areas, quartz-poor dacitic to andesitic(?) VRFs dominated the detrital assemblage. Minor SRFs and mafic VRFs, now replaced by GMC, are recognized on the basis of colour, internal structures, and internal textures, including skeletal, possible spinifex textures. Detrital feldspar is represented by blocky, sericite-rich grain pseudomorphs. A semi-quantitative point-count scheme, developed for the analysis of heavily altered sandstones, indicates the following primary detrital-mode ranges for Panorama arenites: quartz, 0–28%; feldspar, 0–28%, VRFs, 58–86%, and SRFs 0–25%. In about half the point-counted samples, feldspar could not be distinguished from rock fragments. In such cases, both were counted as one grain type, Lv', which makes up from 84 to 100% of the framework modes of these rocks. These sands were derived from a terrane composed largely of fresh felsic volcanic rocks and sediments, but locally including minor mafic, ultramafic, and sedimentary rocks. Much, but not all, of the felsic volcaniclastic sand represents reworked pyroclastic debris. There is no evidence for contributions from plutonic or metamorphic sources. The Panorama modal assemblage represents a provenance that is lithologically more restricted than that of Archaean greywackes and other siliciclastic units common in the sedimentary portions of these same Early Archaean greenstone belts and younger greenstone belts (3·0–2·7 Ga). 相似文献
19.
Surface textures of quartz grains have been examined from five samples from the Laurentian Fan and Sohm Abyssal Plain, representing varied transport distances and power of the depositing turbidity current. The grains retain their primary irregular shape derived from glacial erosion, and glacial surface textures are preserved in dish-shaped depressions. These features have been superimposed by a slight rounding of edges and an abundance of collision-induced markings, particularly mechanical V-forms. The most intense current modification of this sort occurs in mid-Wisconsinan or earlier sands that have been transported over 1000 km to the distal Sohm Abyssal Plain by turbidity currents. Collision textures probably develop during grain flow on the steep continental slope: delicate resedimented shelf foraminifera are preserved in the same turbidites and most have been transported exclusively in suspension. 相似文献
20.
Anders Lindh 《Precambrian Research》1977,5(3):261-282
A group of granitic intrusions occurs in western Sweden, showing a regular spacing between consecutive intrusions. Their spacing suggests solid-state doming of granitic material. However the textures of the rock are most easily interpreted in terms of crystallization from a magma. This interpretation is also consistent with contact observations and chemical characteristics of the rock. A hypothesis simultaneously explaining the textures and the spacing is presented, where doming of a light layer of potassium-rich migmatite is suggested to be followed by partial melting of the same rock. The magma collects at the top of the thus-formed sinusoidal waves and later intrudes into the country rock, where it crystallizes before reaching the surface. 相似文献