共查询到20条相似文献，搜索用时 31 毫秒
1.
An approach for predicting swelling pressure of bentonites based on thermodynamic relationships between swelling pressure and suction is presented in this paper. The proposed method requires sorption isotherm data of the bentonites. A series of swelling pressure tests were performed on compacted specimens of bentonite-sand mixtures with different bentonite contents, water contents, and dry densities. The sorption isotherm of the pure bentonite was measured using a chilled-mirror hygrometer. It is found that the method works well for the bentonite-sand mixtures tested. Several published data on bentonites that have been proposed to be used as buffer and sealing material for nuclear waste repository were collected and used to verify the method. The proposed method is found to be also applicable for other bentonites of different types and therefore, can be used to predict swelling pressure of bentonites. 相似文献
2.
3.
膨润土具有遇水膨胀的特性,是高放核废料深地质处置库理想的缓冲回填材料。膨胀特性是其作为缓冲材料最重要的性能之一,同时受多方面因素的影响。本文以我国首选缓冲材料高庙子膨润土为研究对象,以含水率和干密度为控制变量,以恒体积法为试验方法,研究了高压实高庙子膨润土的水化膨胀特性,采用压汞试验法(MIP)对膨润土微观结构进行了研究,并以此对水化膨胀特性进行了解释。膨胀力试验结果表明,高庙子膨润土的膨胀力发展形式和最大膨胀力均受试样含水率和干密度影响,干密度较小时,水化曲线呈明显的双峰结构,干密度较大时,水化曲线形态与含水率相关,随着含水率增大,双峰结构逐渐消失。MIP试验结果表明,高庙子膨润土的孔径分布同样受含水率和干密度影响,随着含水率和干密度降低,集合体间大孔隙体积增多。膨润土的水化膨胀曲线受集合体间大孔隙影响显著。大孔隙较多时,膨润土集合体能迅速膨胀形成临时结构,当膨胀力超过临时结构的极限荷载时发生坍塌,膨胀力回落,内部结构重组后继续水化达到最大膨胀力,因此其水化膨胀曲线呈明显的双峰结构。随着大孔隙量减少,水化膨胀曲线由双峰结构演变成一条平滑曲线。 相似文献
4.
Tadikonda Venkata Bharat Puvvadi Venkata Sivapullaiah Mehter M. Allam 《Environmental Earth Sciences》2013,70(1):303-314
Bentonite clays are proven to be attractive as buffer and backfill material in high-level nuclear waste repositories around the world. A quick estimation of swelling pressures of the compacted bentonites for different clay–water–electrolyte interactions is essential in the design of buffer and backfill materials. The theoretical studies on the swelling behavior of bentonites are based on diffuse double layer (DDL) theory. To establish theoretical relationship between void ratio and swelling pressure (e versus P), evaluation of elliptic integral and inverse analysis are unavoidable. In this paper, a novel procedure is presented to establish theoretical relationship of e versus P based on the Gouy–Chapman method. The proposed procedure establishes a unique relationship between electric potentials of interacting and non-interacting diffuse clay–water–electrolyte systems. A procedure is, thus, proposed to deduce the relation between swelling pressures and void ratio from the established relation between electric potentials. This approach is simple and alleviates the need for elliptic integral evaluation and also the inverse analysis. Further, application of the proposed approach to estimate swelling pressures of four compacted bentonites, for example, MX 80, Febex, Montigel and Kunigel V1, at different dry densities, shows that the method is very simple and predicts solutions with very good accuracy. Moreover, the proposed procedure provides continuous distributions of e versus P and thus it is computationally efficient when compared with the existing techniques. 相似文献
5.
6.
Liu Xiaoyan Congress Surya Sarat Chandra Cai Guojun Liu Songyu 《Acta Geotechnica》2021,16(5):1487-1507
Buffer/backfill material is an important engineering barrier in a deep geological repository of high-level radioactive waste (HLW). Its thermo-hydro-mechanical (THM) performance is very important for the safe and stable operation of the HLW repository system. Natural graphite powder mixed with sodium bentonite forms a buffer/backfill material that can dissipate heat quickly and provide strong isolation. In this paper, the THM characteristics of bentonite–sand–graphite–polypropylene fiber (BSGF) mixtures, used as a buffer/backfill material, were studied through a series of laboratory tests. The influence of graphite and polypropylene fiber contents on thermal conductivity, swelling pressure, hydraulic conductivity, and strength properties of BSGF mixtures with different sand contents was analyzed. Experimental results indicated that the graphite content, the maximum graphite mesh number, and the initial dry density of bentonite–graphite mixtures influenced the thermal conductivity of bentonite–graphite mixtures. The addition of polypropylene fiber was found to enhance the shear strength and inhibit cracking without significantly affecting the expansivity, permeability, and thermal conductivity of the BSGF mixtures. This study provides a new buffer/backfill material that can improve the stability, functionality, and thermal efficiency of the HLW repository.
相似文献7.
对两种高庙子钠基膨润土（简称GMZ001和GMZ07）在不同初始干密度下进行膨胀力试验、常压力下的膨胀变形试验以及压缩试验。试验结果表明,GMZ001的膨胀能力要比GMZ07的大,并且GMZ001比GMZ07更难压实。对饱和后两种膨润土进行压汞试验和扫描电子显微镜测试后发现,在相同孔隙比下,GMZ07集聚体间孔隙较多,并且GMZ001集聚体的水化程度大于GMZ07。结合土工和微观试验的结果,认为导致两者力学性能差异的主要原因是由于颗粒粒径大小的差异以及蒙脱石含量的不同。最后利用蒙脱石孔隙比的概念对两种膨润土的浸水膨胀试验结果进行归一化,并对膨润土的膨胀特性进行了预测。 相似文献
8.
Agapitus Ahamefule Amadi 《Environmental Earth Sciences》2013,70(6):2437-2442
Compacted soil–bentonite mixtures are finding wide application as buffer material for waste repositories for their favorable self-sealing qualities. The swelling properties of such materials which serve as a measure of their self-sealing capabilities and, thus, the efficiency of the repository in sealing off their contents from the environment are closely related to the chemistry of the leachate that emanate from the wastes. For this reason, the swelling parameters (namely swelling potential and pressure) of compacted lateritic soil–bentonite mixtures under consideration for use as barrier in municipal waste landfill were evaluated. Series of swelling potential and pressure tests were performed using variable content (0–10 %) of bentonite at predetermined optimum moisture content. Soil mixtures were compacted with British Standard Heavy compactive effort and saturated with processed tap water as well as three leachate solutions of varying ionic strength that were generated in active open dump landfills. Experimental results showed that swelling potential based on the free swell together with the maximum swell pressures of compacted soil mixtures measured at equilibrium increased approximately linearly with increase in the amount of bentonite when inundated with processed tap water and the three leachate solutions. On the other hand, these swelling parameters decreased as the ionic strength of the leachate solutions measured by their electrical conductivity increased for the various soil mixtures. These results provide an insight into the swelling behavior and the possible degradation in the efficiency of the proposed lateritic soil–bentonite mixtures in relation to their use as buffer material in waste landfills. 相似文献
9.
Dynamic compaction tests of bentonite-based materials (BBMs) with 100, 70 and 50% bentonite contents have been performed using five powdery bentonites with different physicochemical properties to establish the simplified evaluation method for dynamic compaction properties of BBMs. For a given bentonite content and a total compaction energy condition, the maximum dry density, ρdmax, and the optimum water content, wopt, which are well-known indexes of compaction properties, for BBMs were determined according to the type of bentonite used for BBMs. For evaluation of those values of BBMs derived in this study, the plastic limit of BBM, wpbbm, was defined as the plastic limit that was measured using the sample pulverized to a maximum grain size of less than 425 μm in the case of BBM with sand having a maximum grain size of more than 425 μm and was measured using the powdery bentonite itself in the case of BBM without sand. This study proposed equations for evaluating ρdmax and wopt of BBMs with more than 50% bentonite content under the total compaction energy conditions of 551–2755 kN-m/m3 using wpbbm. Finally, we related the equations derived in this study to the equation for evaluating hydraulic properties of compacted BBMs proposed in previous work and proposed the preparation method of BBMs with more than 50% bentonite content for constructing BBM buffer by in-situ compaction method. 相似文献
10.
高庙子膨润土已被确定为我国高放废物地质处置的首选缓冲/回填材料,进行其力学特性及应用模拟研究对合理设计处置库具有十分重要的意义。考虑膨胀效应的UH模型是在超固结非饱和土本构模型（非饱和土UH模型）的基础上提出的,因引入了土体团粒的吸水膨胀作用,使其适用于非饱和膨润土。基于有限元软件ABAQUS的二次开发平台,利用Fortran语言编制模型的UMAT（user-difined material）材料子程序,进行了考虑膨胀效应UH模型的有限元实现。然后针对高放废物处置概念模型,利用编制的模型子程序对高放废物处置系统进行了三维有限元模拟,并对渗流场和应力场的演化规律进行了初步探究。模拟结果显示处置系统中膨润土的内应力增加,土体的稳定性较好,说明选择高庙子膨润土作为缓冲/回填材料的合理性,也同时验证了程序的正确性。 相似文献
11.
Jonny Rutqvist Liange Zheng Fei Chen Hui-Hai Liu Jens Birkholzer 《Rock Mechanics and Rock Engineering》2014,47(1):167-186
This paper presents simulation results related to coupled thermal–hydraulic–mechanical (THM) processes in engineered barrier systems (EBS) and clay host rock, in one case considering a possible link to geochemistry. This study is part of the US DOE Office of Nuclear Energy’s used fuel disposition campaign, to investigate current modeling capabilities and to identify issues and knowledge gaps associated with coupled THMC processes and EBS–rock interactions associated with repositories hosted in clay rock. In this study, we simulated a generic repository case assuming an EBS design with waste emplacement in horizontal tunnels that are back-filled with bentonite-based swelling clay as a protective buffer and heat load, derived for one type of US reactor spent fuel. We adopted the Barcelona basic model (BBM) for modeling of the geomechanical behavior of the bentonite, using properties corresponding to the FEBEX bentonite, and we used clay host rock properties derived from the Opalinus clay at Mont Terri, Switzerland. We present results related to EBS host–rock interactions and geomechanical performance in general, as well as studies related to peak temperature, buffer resaturation and thermally induced pressurization of host rock pore water, and swelling pressure change owing to variation of chemical composition in the EBS. Our initial THM modeling results show strong THM-driven interactions between the bentonite buffer and the low-permeability host rock. The resaturation of the buffer is delayed as a result of the low rock permeability, and the fluid pressure in the host rock is strongly coupled with the temperature changes, which under certain circumstances could result in a significant increase in pore pressure. Moreover, using the BBM, the bentonite buffer was found to have a rather complex geomechanical behavior that eventually leads to a slightly nonuniform density distribution. Nevertheless, the simulation shows that the swelling of the buffer is functioning to provide an adequate increase in confining stress on the tunnel wall, leading to a stabilization of any failure that may occur during the tunnel excavation. Finally, we describe the application of a possible approach for linking THM processes with chemistry, focusing on the evolution of primary and secondary swelling, in which the secondary swelling is caused by changes in ionic concentration, which in turn is evaluated using a transport simulation model. 相似文献
12.
高放废物地质处置研究中的矿物学问题 总被引：2，自引：0，他引：2
在高放废物地质处置研究中的一些矿物学问题应引起矿物学家的注意 。高放废物地 质处置库的缓冲/回填材料是选择以钠质蒙脱石为主要成分的钠基膨润土,还是以钙质蒙脱 石为主的钙基膨润土?怎样选择对99Tc、129I有较好吸附能力的硒汞矿、脆 硫锑铅矿和辉锑矿的替代物来作缓冲/回填材料中的添加剂,以能阻滞99Tc和129 I的迁移?沸石对某些放射性核素的吸附特征也需进一步研究。 相似文献
13.
Acta Geotechnica - Compacted Gaomiaozi bentonite–sand mixtures are regarded as attractive buffer/backfill materials for nuclear waste deep geological disposal. When the mixture blocks are... 相似文献
14.
G.R. Alther 《Engineering Geology》1987,23(3-4):177-191
15.
盐溶液饱和高庙子膨润土膨胀特性及预测 总被引：2，自引：0，他引：2
甘肃北山被首选为修建高放废物处置库的地区。考虑到该地区地下水中含有总溶解固体（TDS）,选择NaCl-Na2SO4作为溶解固体。以高庙子钠基膨润土为试验材料,利用单向固结仪,进行不同TDS浓度盐溶液和蒸馏水饱和的膨胀试验。根据蒙脱石孔隙比的概念,统一整理了饱和高庙子膨润土在盐溶液和蒸馏水饱和下的膨胀特性。结果表明,当TDS浓度为12.3 g/L（预选处置库区的最高离子浓度）时,在双对数坐标中蒙脱石孔隙比与膨胀力关系和干密度与膨胀力关系均呈直线且平行于蒸馏水的试验结果;对于给定干密度试样,膨胀力的对数与TDS浓度呈线性关系。根据以上试验结果,给出了由高庙子钠基膨润土的设计干密度和离子浓度计算相应膨胀力和膨胀变形的表达式。 相似文献
16.
砂-膨润土混合屏障材料渗透性影响因素研究 总被引：2，自引：0，他引：2
膨润土因具有渗透性低、阳离子交换能力高等优点被认为是最适合高放废物深地质处置库中屏障系统的缓冲材料,工程实践发现随着水化过程的进行,纯高压实膨润土强度不断降低,并最终影响到工程屏障系统功能的发挥。针对这一问题,在膨润土中加入一定比例的石英砂,可以有效地提高工程屏障的热传导特性、压实性、力学强度和长期稳定性,降低工程造价。本文研究了影响砂-膨润土混合物渗透性的主要因素,包括膨润土含量、粒径分布、含水量和干密度、压实方法以及膨润土类型等。结果表明,砂土混合物渗透性主要受膨润土的渗透性控制,渗透系数随着膨润土含量和干密度的增加而减小,当膨润土含量超过某一界限值后,继续增加膨润土含量对降低渗透系数的作用有限;细颗粒和级配良好的混合物渗透系数小,当土体内部发生渗透侵蚀将增大渗透系数;最优含水量条件下压实得到的渗透系数最低,高于最优含水量压实得到的渗透系数比低于最优含水量压实得到的渗透系数要小。 相似文献
17.
In-situ emplacement of clay-based buffers in a nuclear fuel waste disposal vault limits the maximum attainable buffer density. This will vary with the composition of the buffer. A study of the maximum attainable densities of candidate Na bentonite/sand and illite/sand buffers is described. The addition of sand significantly increases the achievable compacted density. This increase may be obtained without any decrease in the swelling pressures developed by Na bentonite buffers. Sand decreases the shrinkage potential of the buffer and may also decrease the mass diffusion coefficient. A mixture of 50% sand and 50% clay by mass appears to optimise the physical properties of the buffer. 相似文献
18.
《矿物学报》2013,(Z1)
The thermal property is one of the key properties for the design of the high-level radioactive waste (HLW) repository. In this study, the thermal properties transient automatic tester (HPP-F) is uesd to study the thermal conductivity of multiphase composite buffer/backfill material including the type B-Z and B-Z-P (Here B、Z、P represents bentonite、zeolite and pyrite respectively,the same as in the following.) in different dry density and moisture conditions. The results show that for the same moisture content (dry density), thermal conductivity of specimens increases as the dry density (moisture content) increases. As a result, the type B-Z-P which is highly compacted of 1.8 g/cm3 in dry density and 17.65% in moisture content performs well, it meets the requirements of the IAEA and is easy to be compacted ,so it can be recommend as a alternative material of high level radioactive waste disposal repository buffer/backfilling materials. 相似文献
19.
中国高放废物地质处置缓冲材料大型试验台架和热-水-力-化学耦合性能研究 总被引：1，自引：0，他引：1
缓冲材料作为高放废物深地质处置库中一道重要的人工屏障,与高放废物容器和处置库围岩直接接触,在高放废物衰变热、辐射作用和地下水等影响下产生复杂的热-水-力-化学耦合作用,为了验证缓冲材料是否能长期有效地发挥其屏障材料的作用,核工业北京地质研究院利用高庙子钠基膨润土组装并运行了模拟中国高放废物地质处置室 尺寸的大型缓冲材料膨润土试验台架（China-Mock-Up）。建立了缓冲材料试验台架的安装和试验方法,依据实测数据和理论分析,揭示了热-水-力-化学耦合作用条件下膨润土中的相对湿度是在加热器的热效应和外部供水的湿效应共同作用下发生变化的,压实膨润土中应力的变化主要是由于膨润土遇水膨胀和加热器的热效应引起的,试验验证了模拟高放废物地质处置室内加热器（废物罐）运行初期的位移过程,为缓冲材料和高放废物地质处置库的设计提供了重要的工程参数和理论依据。 相似文献
20.
A Column Experiment to Study the Thermo-Hydro-Mechanical Behaviour of Expansive Soils 总被引：1，自引：1，他引：0
Tom Schanz Long Nguyen-Tuan Maria Datcheva 《Rock Mechanics and Rock Engineering》2013,46(6):1287-1301
The study of heat transfer, water flow, and swelling pressure development in engineered clay barriers and the evaluation of the influence of these phenomena on the barrier properties are important issues for predicting the performance of nuclear waste repository facilities. In this work, an experimental setup is presented especially meant to assess the response of the sand–bentonite mixture under conditions close to that of the buffer in a radioactive waste repository. A newly developed column device for laboratory testing of coupled thermo-hydro-mechanical (THM) behaviour of clay-buffer materials is introduced and its calibration, verification and the first experimental data are presented and discussed. The main features of the column device are: hydraulic and thermal gradients are possible to be applied; water content, suction and temperature development can be measured continuously at three locations along the sample height; swelling stress can be measured at top and the bottom of the sample. Measuring transient temperature, water content and suction simultaneously at the same height levels and with special care to minimise the sample disturbance is one of the advantages of the column device proposed here when compared to that previously reported in the literature. The main objectives of this paper are: (1) to describe the experimental device, (2) to introduce the sensors implemented and their calibration, and (3) to present and discuss the first experimental results obtained with the new equipment. The first experimental results show promise in the ability of the newly developed column device to provide reliable data for assessing the THM behaviour of expansive materials that are foreseen as buffer material in high level waste repositories. 相似文献