共查询到20条相似文献，搜索用时 125 毫秒
1.
The Xitieshan deposit (~ 64 Mt at 4.86% Zn, 4.16% Pb, 58 g/t Ag, and 0.68 g/t Au) is hosted by the Middle to Late Ordovician Tanjianshan Group of the North Qaidam tectonic metallogenic belt, NW China. This belt is characterized by island arc volcanic, ultra-high pressure (UHP) metamorphic and ophiolitic rocks. The Tanjianshan Group constitutes a succession of metamorphosed bimodal volcanic and sedimentary rocks, which are interpreted to have formed on the margin of a back-arc ocean basin between the Qaidam block and the Qilian block.Four stratigraphic units are identified within the Ordovician Tanjianshan Group. From northeast to southwest they are: 1) unit a, or the lower volcanic-sedimentary rocks, comprising bimodal volcanic rocks (unit a-1) and sedimentary rocks (unit a-2) ranging from carbonates to black carbonaceous schist; 2) unit b, or intermediate-mafic volcaniclastic rocks, characterized by intermediate to mafic volcaniclastic rocks intercalated with lamellar carbonaceous schist and minor marble lenses; 3) unit c, a purplish red sandy conglomerate that unconformably overlies unit b, representing the product of the foreland basin sedimentation during the Early Silurian; 4) unit d, or mafic volcanic rocks, from base to up, comprising the lower mafic volcaniclastic rocks (unit d-1), middle clastic sedimentary rocks (unit d-2), upper mafic volcaniclastic rocks (unit d-3), and uppermost mafic volcanic rocks (unit d-4). Unit a-2 hosts most of the massive sulfides whereas unit b contains subordinate amounts.The massive stratiform lenses constitute most of the Xitieshan deposit with significant amount of semi-massive and irregularly-shaped sulfides and minor amounts in stringer veins. Pyrite, galena and sphalerite are the dominant sulfide minerals, with subordinate pyrrhotite and chalcopyrite. Quartz is a dominant gangue mineral. Sericite, quartz, chlorite, and carbonate alteration of host rocks accompanies the mineralization.U-Pb zircon geochronology yields three ages of 454 Ma, 452 Ma and 451 Ma for the footwall felsic volcanic rocks in unit a-1, sedimentary host rocks in unit a-2 and hanging-wall unit b, respectively. The Xitieshan deposit is considered to be coeval with the sedimentation of unit a-2 and unit b of the Tanjianshan Group. The Xitieshan deposit has been intensely deformed during two phases (main ductile shear and minor ductile-brittle deformation). The main ductile shear deformation controls the general strike of the ore zones, whereas minor deformation controls the internal geometry of the ore bodies. 40Ar-39Ar age of muscovite from mylonitized granitic gneisses in the ductile shear zone is ~ 399 Ma, which is interpreted to date the Xitieshan ductile shear zone, suggesting that Early Devonian metamorphism and deformation post-dated the Tanjianshan Group.The Xitieshan deposit has many features similar to that of the Bathurst district of Canada, the Iberian Pyrite Belt of Spain, the Wolverine volcanogenic massive sulfide deposit in Canada. Based on its tectonic setting, host-rock types, local geologic setting, metal grades, geochronology, temperatures and salinities of mineralizing fluid and source of sulfur, the Xitieshan deposit has features similar to sedimentary exhalative (SEDEX) and VMS deposits and is similar to volcanic and sediment-hosted massive sulfide (VSHMS) deposits. 相似文献
2.
The Lanping basin is a significant Pb–Zn–Cu–Ag mineralization belt of the Sanjiang Tethyan metallogenic province in China. Over 100 thrust-controlled, sediment-hosted, Himalayan base metal deposits have been discovered in this basin, including the largest sandstone-hosted Pb–Zn deposit in the world (Jinding), and several Cu ± Ag ± Co deposits (Baiyangping, Baiyangchang and Jinman). These deposits, with total reserves of over 16.0 Mt Pb + Zn, 0.6 Mt Cu, and 7000 t Ag, are mainly hosted in Meso-Cenozoic mottled clastic rocks, and strictly controlled by two Cenozoic thrust systems developed in the western and eastern segments of the Lanping basin.To define the metallogenic history of the study area, we dated nine calcite samples associated with copper sulfides from the Jinman Cu deposit by the Sm–Nd method and five molybdenite samples from the Liancheng Cu–Mo deposit by the Re–Os method. The calcite Sm–Nd age for the Jinman deposit (58 ± 5 Ma) and the molybdenite Re–Os age for the Liancheng deposit (48 ± 2 Ma), together with previously published chronological data, demonstrate (1) the Cu–Ag mineralization in the western Lanping basin mainly occurred in three episodes (i.e., ∼56–54, 51–48, and 31–29 Ma), corresponding to the main- and late-collisional stages of the Indo–Asian orogeny; and (2) the Pb–Zn–Ag (±Cu) mineralization in the eastern Lanping basin lacked precise and direct dating, however, the apatite fission track ages of several representative deposits (21 ± 4 Ma to 32 ± 5 Ma) may offer some constraints on the mineralization age. 相似文献
3.
South China Block (SCB) is the broad area including the Yangtze Craton in the northwest and Huanan Orogen in the southeast. It is an important epithermal metallogenic province in China, containing at least 1 high-sulfidation (HS) and 42 low-sulfidation (LS) Au-Ag ± Cu ± Pb-Zn ± Sb epithermal deposits. Porphyry-type mineralization was recognized in four of the LS deposits, and thus they were regarded as LS–P type. These 43 deposits are mainly located in: (1) the Lower Yangtze River Belt and (2) the Northeastern Jiangnan Orogenic Belt in the Yangtze Craton, (3) the Wuyi-Yunkai Orogenic Belt and (4) the Southeast Coastal Volcanic Belt in the Huanan Orogen. They are mostly located in Mesozoic volcanic basins, especially where the regional faults and their subsidiaries occurred. The host rocks include Jurassic–Cretaceous volcanic-sedimentary rocks, coeval or slightly older subvolcanic, granitoids and breccias, and metamorphic basement rocks. The alteration of the HS epithermal deposit (Zijinshan Cu-Au) zoned from silicic (vuggy quartz), through alunite, to dickite and phyllic alteration zones, from the ore veins outwards. The alteration of the LS deposits is zoned from adularia-chalcedony-bladed calcite (or quartz pseudomorphs after bladed calcite) in ore veins to distal illite-sericite-chlorite-kaolinite assemblages. For those LS–P systems, besides the dominated LS alteration assemblages, phyllic and potassium silicate alteration related to porphyry mineralization were identified. Acid leaching textures and vein, stockwork and breccia structures are common in HS deposit, while the LS epithermal deposits are characterized by open-space filling, crustifications, colloform banding and comb structures. The ore-forming fluids are low-temperature, low-salinity meteoric water-dominated in most epithermal deposits in SCB, with variable input of magmatic water. The ore components were derived from both the deep magma and host rocks, and transported upwards or laterally and precipitated in the fracture systems by fluid boiling, mixing and cooling. Most of the epithermal deposits are formed at depth of < 1.5 km and < 300 °C, with few exceptions containing porphyry-type mineralization, such as the Zhilingtou, Yinshan and Longtoushan deposits. Deep drilling is suggested in these deposits as more epithermal and/or porphyry mineralization could be expected. The mineral systems were formed in Early Yanshanian (180–130 Ma) and Late Yanshanian (120–90 Ma) periods. The Early Yanshanian epithermal ore systems are mainly located in a series of E–W-trending metallogenic belts to the west of the Lishui–Haifeng Fault, which were formed in a syn- or post-collision tectonic setting by the collision between the SCB and its surrounding plates. The Late Yanshanian epithermal deposits are mainly located in Southeast Coastal Volcanic Belt, genetically related to the westward subduction of the paleo-Pacific plate. 相似文献
4.
Gold paleoplacers become progressively more affected by diagenetic processes with age and burial. Mesozoic paleoplacer deposits in southern New Zealand display intermediate stages of diagenetic transformation compared to little-affected Late Cenozoic paleoplacers and strongly-affected Paleozoic and Precambrian paleoplacers. The Mesozoic (Cretaceous) diagenesis resulted in near-pervasive alteration, cementation and lithification of the paleoplacer. Lithic clasts and matrix have been extensively altered to illite, ferrous iron-bearing smectite-vermiculite, and kaolinite, and the cement consists mainly of clays and calcite. Diagenetic pyrite, marcasite, vivianite, and Mn oxide also contributed to cementation. Alteration occurred under near-surface (<500 m depth) conditions with groundwater that had circumneutral pH, high alkalinity, and elevated dissolved K, Mg and Ca. Detrital albite remained unaffected by alteration. Detrital gold has been variably dissolved and redeposited, with widespread formation of gold overgrowths on the 1–10 μm scales, with 1–3 wt% Ag. Gold mobility was driven by reduced sulphur complexes in the low redox, high pH diagenetic environment. The overgrowth gold locally contributed to cementation of fine clastic grains, and has intergrown with diagenetic clays and Mn oxide. Post-diagenetic oxidation of the paleoplacer deposit has transformed much of the pyrite to ferric oxyhydroxide and deposited some ferric oxyhydroxide coatings on gold. These oxidation processes have had only minor effects on gold mobility and textures. Hence, the low redox conditions of diagenetic gold mobility were distinctly different from those typically associated with oxidation-related supergene gold mobility. Diagenesis can affect economics of paleoplacer mining by hindering rock disaggregation during processing, coating gold particles with secondary minerals, and increasing the clay content of the deposit, all of which can lower the efficiency of gold recovery. 相似文献
5.
Dave Craw 《Ore Geology Reviews》2010,37(3-4):224-235
The giant gold placer system on the Otago Schist of southern New Zealand was derived from Mesozoic orogenic gold deposits in the underlying schist basement. The core of the schist basement was exhumed in the middle Cretaceous, coeval with the accumulation of the oldest preserved nonmarine sedimentary rocks in the area (ca 112 Ma). Those sedimentary rocks contain quartz clasts, with distinctive ductile deformation textures, that were derived from structural zones in, or adjacent to, major orogenic gold deposits. Quartz textures in these structural zones are readily distinguishable from the rest of the schist belt, and hence provide a fingerprint for erosion of gold. The earliest sedimentary rocks on the margins of the gold-bearing schist belt are immature, and were derived from unoxidised outcrops in areas of high relief. Gold was not liberated from unoxidised basement rocks during erosion, and was removed from the system without placer concentration. Placer concentration did not begin until about 20 million years later, when oxidative alteration of gold deposits had facilitated gold grain size enhancement from micron scale (primary) to millimetre scale (secondary). Subsequent erosion and recycling of gold in the early Cenozoic, and again in the late Cenozoic, caused additional concentration of gold in progressively younger deposits. The Klondike giant placer goldfield of Canada had a similar geological history to the Otago placer field, and Klondike placer accumulation occurred in the late Cenozoic, at least 70 million years after Mesozoic exhumation of orogenic gold. The giant placer deposit on the western slopes of the Sierra Nevada in California occurs in Eocene and younger sedimentary rocks, at least 40 million years younger than the timing of major exhumation of the source rocks. Circum-Pacific giant gold placers formed under entirely different tectonic regimes from the emplacement of their source orogenic deposits, and these giant placer deposits do not form in foreland basins associated with convergent orogens. Formation of giant placers requires less active erosion and more subdued topography than the collisional orogenic activity that accompanied emplacement of source gold deposits in basement rocks, as well as oxidative alteration of the primary deposits to liberate gold from sulfide minerals and enhance secondary gold grain size. 相似文献
6.
The Meso-Cenozoic geodynamic evolution of the eastern Pontides orogenic belt provides a key to evaluate the volcanogenic massive sulfide (VMS) deposits associated with convergent margin tectonics in a Cordilleran-type orogenic belt. Here we present new geological, geochemical and zircon U–Pb geochronological data, and attempt to characterize the metallogeny through a comprehensive overview of the important VMS mineralizations in the belt. The VMS deposits in the northern part of the eastern Pontides orogenic belt occur in two different stratigraphic horizons consisting mainly of felsic volcanic rocks within the late Cretaceous sequence. SHRIMP zircon U–Pb analyses from ore-bearing dacites yield weighted mean 206Pb/238U ages ranging between 91.1 ± 1.3 and 82.6 ± 1 Ma. The felsic rocks of first and second horizons reveal geochemical characteristics of subduction-related calc-alkaline and shoshonitic magmas, respectively, in continental arcs and represent the immature and mature stages of a late Cretaceous magmatic arc. The nature of the late Cretaceous magmatism in the northern part of the eastern Pontides orogenic belt and the various lithological associations including volcaniclastics, mudstones and sedimentary facies indicate a rift-related environment where dacitic volcanism was predominant. The eastern Pontides VMS deposits are located within the caldera-like depressions and are closely associated with dome-like structures of felsic magmas, with their distribution controlled by fracture systems. Based on a detailed analyses of the geological, geophysical and geodynamic information, we propose that the VMS deposits were generated either in intra arc or near arc region of the eastern Pontides orogenic belt during the southward subduction of the Tethys oceanic lithosphere. 相似文献
7.
A Permian magmatic Ni-Cu sulfide deposit cluster occurs in the Kalatongke district in the Southern Chinese Altai Orogenic Belt, western China. These deposits are associated with the mafic units of the Y1, Y2, Y3, Y9 and G21 mafic-intermediate complexes. In this paper we report the first zircon U-Pb ages for the Y3 and G21 intrusions, which are 283.3 ± 1.3 Ma and 281.1 ± 1.5 Ma, respectively. Our new age data confirm that the sulfide-bearing mafic units of the Y1, Y2 (connected with Y1 at depth), Y3, Y9 and G21 intrusions all formed in Early Permian between ∼281 and ∼287 Ma. New and existing petrological-geochemical data show some important regular variations between these deposits. The host lithologies change from olivine-bearing rocks for the Y1-Y2-Y9 deposits to olivine-free rocks such as norite for the Y3 deposit and leucogabbro for the G21 deposit. The olivine Fo contents of the Y1 deposit are up to 82 mol%, which are slightly higher than those of the Y2 deposit (up to 81 mol%) and the Y9 deposit (up to 79 mol%). The average plagioclase An contents of the olivine-bearing Y1-Y2-Y9 deposits are higher than those of the olivine-free Y3-G21 deposits. Among the three deposits (Y1, Y2 and Y3) that occur closely along the same structural lineament, the Ni/Cu ratios of bulk sulfides decrease from the olivine-bearing deposits (Y1 and Y2) to the olivine-free deposit (Y3). The PGE tenors of these deposits (Y1, Y2 and Y3) and the nearby coeval deposits (Y9 and G21) are extremely low, indicating that their parental magmas are severely depleted in PGEs. The variations of PGE tenors within a single deposit as well as among the different deposits are mainly due to variable R factors. The host rocks of these deposits are all characterized by elevated initial 87Sr/86Sr ratios from 0.7045 to 0.7047, positive εNd values from 4.95 to 6.86, positive εHf values of zircon from 9 to 16, and elevated δ18O values of zircon from 6.15 to 6.7‰. The isotope data indicate that the parental magmas for these deposits experienced up to ∼15 wt% crustal contamination. The δ34S values of the sulfide minerals from these deposits are from −3.1‰ to 0.4‰, with a peak at −2.2‰, indicating the involvement of crustal sulfur. The isotope data and mineral chemistry together indicate that both olivine fractional crystallization and addition of crustal sulfur played a role in triggering sulfide saturation in the parental magmas for these deposits. Based on higher Ni/Cu ratios of sulfide mineralization in the olivine-bearing intrusions (Y1, Y2, Y9) than in the coeval olivine-free intrusions (Y3, G21), we recommend that Ni exploration in the region focus on the olivine-bearing intrusions that were emplaced in the Early Permian. 相似文献
8.
The Cangyuan Pb-Zn-Ag polymetallic deposit is located in the Baoshan Block, southern Sanjiang Orogen. The orebodies are hosted in low-grade metamorphic rocks and skarn in contact with Cenozoic granitic rocks. Studies on fluid inclusions (FIs) of the deposit indicate that the ore-forming fluids are CO2-bearing, NaCl-H2O. The initial fluids evolved from high temperatures (462–498 °C) and high salinities (54.5–58.4 wt% NaCl equiv) during the skarn stage into mesothermal (260–397 °C) and low salinities (1.2–9.5 wt% NaCl equiv) during the sulfide stage. The oxygen and hydrogen isotopic compositions (δ18OH2O: 2.7–8.8‰; δD: −82 to −120‰) suggest that the ore-forming fluids are mixture of magmatic fluids and meteoric water. Sulfur isotopic compositions of the sulfides yield δ34S values of −2.3 to 3.2‰; lead isotopic compositions of ore sulfides are similar to those of granitic rocks, indicating that the sulfur and ore-metals are derived from the granitic magma. We propose that the Cangyuan Pb-Zn-Ag deposit formed from magmatic hydrothermal fluids. These Cenozoic deposits situated in the west of Lanping-Changdu Basin share many similarities with the Cangyuan in isotopic compositions, including the Laochang, Lanuoma and Jinman deposits. This reveals that the Cenozoic granites could have contributed to Pb-Zn-Cu mineralization in the Sanjiang region despite the abundance of Cenozoic Pb-Zn deposits in the region, such as the Jingding Pb-Zn deposit, that is thought to be of basin brine origin. 相似文献
9.
Stratabound massive sulfide deposits are widespread along the Middle-Lower Yangtze Metallogenic Belt (MLYMB) and serve as an important copper producer in China. Two contrasting genetic models have been proposed, interpreting the stratabound massive sulfide deposits as a Carboniferous SEDEX protore overprinted by Cretaceous magmatic-hydrothermal system or an Early Cretaceous carbonate replacement deposit. These two contrasting models have been applied to the Xinqiao stratabound Cu-Au sulfide deposit, which is dominated by massive sulfide ores hosted in marine carbonates of the Carboniferous Chuanshan and Huanglong Formations, with minor Cu-Au skarn ores localized in the contact zone between the Cretaceous diorite Jitou stock and the Carboniferous carbonate rocks. New SIMS zircon U-Pb dating suggests that the Jitou stock formed at 138.5 ± 1.1 Ma (2σ, MSWD = 0.6). Pyrite Re-Os dating yields an imprecise date of 142 ± 47 Ma (2σ, MSWD = 7.8). The geochronological data thus constrain the mineralization of the Xinqiao deposit at Early Cretaceous.Fluid inclusions in prograde skarn diopside have homogenization temperatures of 450–600 °C and calculated salinities of 13–58 wt.% NaCl equiv. Quartz from the stratabound ores and pyrite-quartz vein networks beneath the stratabound ores have homogenization temperatures of 290–360 and 200–300 °C, with calculated salinities of 5–12 and 2–10 wt.% NaCl equiv., respectively. Quartz from the skarn ores and veins beneath the stratabound ores have δ18O values of 12.32 ± 0.55 (2 SD, n = 22) and 15.57 ± 1.92‰ (2 SD, n = 60), respectively, corresponding to calculated δ18O values of 6.22 ± 1.59 (2σ) and 6.81 ± 2.76‰ (2σ) for the equilibrated ore-forming fluids. The fluid inclusion and oxygen isotope data thus support a magmatic-hydrothermal origin rather than a SEDEX system for the stratabound ores, with the hydrothermal fluids most likely being derived from the Jitou stock or associated concealed intrusion. Results from this study have broad implications for the genesis and exploration of other stratabound massive sulfide deposits along the MLYMB. 相似文献
10.
11.
The Tongjing Cu–Au deposit is a medium-sized deposit within the Ningwu volcanic basin, east China, and is hosted by Cretaceous volcanic rocks of the Dawangshan and Niangniangshan Formations. The veined and lenticular Cu–Au orebodies are spatially and temporally related to the volcanic and subvolcanic rocks of the Niangniangshan Formation in the ore district. The wall-rock alteration is dominated by silicification, siderite alteration, carbonation, sericitization, chloritization, and kaolinization. On the basis of field evidence and petrographic observations, two stages of mineralization are recognized: (1) a siderite–quartz–sulfide stage (Stage 1) associated with the formation of chalcopyrite and pyrite in a quartz and siderite gangue; and (2) a quartz–bornite stage (Stage 2) cutting the Stage 1 phases. Stage 1 is the main mineralization stage. Quartz that formed in Stage 1 has δ18OH2O values of − 4.3‰ to 3.5‰ with δD values of fluid inclusion waters of − 97.1‰ to − 49.9‰, indicating that the ore-forming fluids were derived from early magmatic fluids and may have experienced oxygen isotopic exchange with meteoric water during Stage 1 mineralization.LA–MC–ICP–MS zircon U–Pb dating of the mineralization-related nosean-bearing phonolite and nosean-bearing phonolitic brecciated tuff at Tongjing yields ages of 129.8 ± 0.5 Ma and 128.9 ± 1.1 Ma, respectively. These results are interpreted as the crystallization age of the volcanic rocks of the Niangniangshan Formation. A hydrothermal sericite sample associated with Cu–Au mineralization at Tongjing yields a plateau 40Ar–39Ar age of 131.3 ± 1.3 Ma. These results confirm a genetic link between the volcanism and associated Cu–Au mineralization. The Tongjing Cu–Au deposit in the Ningwu basin is genetically and possibly tectonically similar to alkaline intrusion-related gold deposits elsewhere in the world. 相似文献
12.
In this review, we describe the geological characteristics and metallogenic–tectonic origin of Fe deposits in the Altay orogenic belt within the Xinjiang region of northwestern China. The Fe deposits are found mainly within three regions (ordered from northwest to southeast): the Ashele, Kelan, and Maizi basins. The principal host rocks for the Fe deposits of the Altay orogenic belt are the Early Devonian Kangbutiebao Formation, the Middle to Late Devonian Altay Formation, with minor occurrences of Lower Carboniferous and Early Paleozoic metamorphosed volcano-sedimentary rocks. The principal mineral-forming element groups of the deposits are Fe, Fe–Cu, Fe–Mn, Fe–P, Fe–Pb–Zn, Fe–Au, and Fe–V–Ti. The Fe deposits are associated with distinct formations, such as volcanic rocks, skarn deposits, pegmatites, granite-related hydrothermal vein mineralization, and mafic pluton-related V–Ti-magnetite deposits. The Fe deposits are most commonly associated with volcanic rocks in the upper Kangbutiebao Formation, in the volcano-sedimentary Kelan Basin, and in skarn deposits at several localities, including the lower Kangbutiebao Formation in the volcano-sedimentary Maizi Basin, and the Altay Formation at Jiaerbasidao–Kekebulake region. Homogenization temperatures of fluid inclusions in the prograde, retrograde and sulfide stages of the skarn type deposit are mainly medium- to high-temperature (cluster between 200 and 500 °C), medium-temperature (cluster between 200 and 340 °C) and low- to medium temperature (cluster between 160 and 300 °C), respectively. Ore fluids in the sedimentation period in the volcano-sedimentary type deposit are characterized by low- to medium temperature (with a peak around 190 °C), low to moderate salinity (3.23 to 22.71 wt.% NaCl equiv). Ore fluids in the pegmatite type deposit are characterized by low- to medium temperature (with a peak at 240 °C), low salinity (with a peak around 9 wt.% NaCl equiv). An analysis of the isotopic data for Fe deposits from the Altay orogenic belt indicates that the sulfur was derived from several sources, including volcanic rocks and granite, as well as bacterial reduction of sulfate from seawater. The present results indicate that different deposit types were derived from various sources. The REE geochemistry of rocks and ores from the Fe deposits in the Altay orogenic belt suggests that the ore-forming materials were derived from mafic volcanic rocks. Based on isotopic age data, the timing of the mineralization can be divided into four broad intervals: Early Devonian (410–384 Ma), Middle Devonian (377 Ma), Early Permian (287–274 Ma), and Early Triassic (c. 244 Ma). The ore-forming processes of the Fe deposits are closely related to volcanic activity and the emplacement of intermediate and felsic intrusions. We conclude that Fe deposits within the Altay orogenic belt developed in a range of tectonic settings, including continental arc, post-collisional extensional settings, and intracontinental settings. 相似文献
13.
《Chemie der Erde / Geochemistry》2021,81(4):125827
The Godar Sabz Mn deposit is located in the Nain-Baft ophiolitic belt in the northeast margin of the Sanandaj-Sirjan zone, Iran. The Nain-Baft back-arc extensional basin resulted from the subduction of the oceanic crust of Neo-Tethys under the southern margin of the Iranian Plate in the Early Cretaceous and hosts several mineral deposits, including volcanogenic massive sulfide, chromite, and Mn deposits. The mineralization in the Godar Sabz Mn deposit occurred predominantly as stratabound, massive, banded, layered, and lenticular orebodies in radiolarian cherts within Baft ophiolitic complex. The main ore minerals are pyrolusite, braunite, with minor amounts of todorokite. The significant geochemical features of the Godar Sabz ores, such as the high MnO content (21.82–80.65 wt%, average = 64.91 wt%), high Mn/Fe (average = 278), Si/Al ratios (average = 92.6), high Ba contents (average = 4495.6 ppm), the low average contents of Cu (81.8 ppm), Ni (106.2 ppm), Co (29.4 ppm), LREE > HREE, and trace element discrimination diagrams indicate a hydrothermal-exhalative source for mineralization. Chondrite-normalized REE patterns of studied ores have negative Ce and slightly positive Eu anomalies, which are similar to hydrothermal Mn deposits. The REE patterns of Mn ores coincide with basaltic lavas, suggesting that the Mn-mineralization in the Godar Sabz deposit was genetically related to the leaching of basaltic lavas. The Godar Sabz Mn deposit has many similarities with the main characteristics of the hydrothermal exhalative Mn deposits, including tectonic setting, host rock type, the morphology of orebodies, ore textures, mineralogy, and chemical features of ores. 相似文献
14.
The Suyunhe large porphyry Mo deposit (∼0.57 Mt molybdenum), located in the West Junggar, NW China, is the largest known porphyry Mo deposit in Xinjiang. Granitoids in this deposit are mainly characterized by three closely spaced intrusive centers (known as stocks I, II and III respectively). The stocks I and III mainly consist of barren granodiorite porphyry and tonalite porphyry, whereas the stock II is mainly composed of fertile monzonitic granite porphyry and granite porphyry. Based on detailed major and trace element, and Sr–Nd isotopic analyses, two distinct compositional groups can be identified. The first group of high-silica end-members (HSE) is characterized by high SiO2 (mostly >75 wt%), low MgO (0.07–0.69 wt%) and Mg# (0.19–0.36), significant Eu depletion in the chondrite-normalized diagram, and low Sr/Y and La/Yb, as well as noticeably negative anomalies of Ba, Sr, P and Ti in the primitive mantle-normalized diagram. The second group of low-silica end-members (LSE), however, displays adakite-like features with lower SiO2 (<75 wt%), higher MgO (0.52–1.32 wt%) and Mg# (0.32–0.52; mostly >0.4), and higher Sr/Y (mostly >20) and La/Yb (>8). The depleted Sr–Nd isotopic characteristics (εNd(T) = 3.5–6.4 and Isr = 0.7026–0.7055) and young two-stage model ages of HSE and LSE indicate that they were both derived from partial melting of juvenile lower crust that might be triggered by asthenosphere upwelling subsequent to a slab rollback event. However, the depths of initial melting might be different. The current evidence demonstrates that HSE in the Suyunhe deposit formed by partial melting of juvenile crust at depths of less than ∼33 km with a plagioclase residue, whereas that for LSE occurred at depths of >40 km where a garnet residue existed and the crust was thickened. The lower source depth, as well as subsequently strong plagioclase fractionation, results in the absence of adakite-like characteristics in HSE.The Ce4+/Ce3+and EuN/EuN1 ratios in zircons of HSE are much lower than ore-forming intrusions from porphyry Cu deposits in the Central Asian Orogenic Belt, but noticeably higher than barren intrusions from the Lachlan fold belt and ore-bearing intrusions from small-intermediate porphyry Mo deposits from the East Qinling–Dabie and the Nanling metallogenic belts, China, indicating that neither too high nor too low oxygen fugacities are favorable for large porphyry Mo deposits. Based on previous studies of adakitic rocks in the world, adakite-like LSE in the Suyunhe deposit are believed to have higher oxygen fugacities, and thus be less fertile than HSE. We finally suggest that adakites and adakite-like rocks are unproductive for porphyry Mo deposits. 相似文献
15.
The Siah-Kamar porphyry Mo deposit, located in the western Alborz-Azarbayjan magmatic belt, is the first and largest Mo deposit in the Iran. This deposit is mainly hosted by an I-type, shoshonitic quartz monzonite to monzonite intrusion and also extends in the surrounding lower to middle Eocene volcanic rocks. The geochemical features of the Siah-Kamar intrusion show enrichment in large-ion lithophile elements (LILE) and light rare earth elements (LREE), and significant negative anomalies of Nb, Ta and Ti analogues to the magmas derived from metasomatized sub-continental mantle. Porphyry molybdenum mineralization is associated with potassic, sericitic, argillic, and propylitic alteration zones. Mineralization occurs in disseminated form, in veins/veinlets and in hydrothermal breccias. The main ore minerals comprise molybdenite, chalcopyrite and bornite. The Microthermometric analyses at Siah-Kamar deposit showed that the halite-bearing inclusions contain high salinity (30.9–60.7 wt% NaCl eq.) with homogenization temperature ranging from 226 °C to 397 °C. The homogenization temperature of two phase liquid-rich inclusions range between 224 °C and 375 °C. The salinity of this type inclusions range from 0.6 to 7.5 wt% NaCl equivalent. The two-phase vapor-rich fluid inclusions homogenized at 270 °C to 397 °C. The salinity of this type fluid inclusions lie within the range of 0.6 to 4.24 wt% NaCl equivalent. Coexisting two phase V-rich and L-rich fluid inclusions in quartz associated with molybdenite provide evidence for boiling at 270 °C to 400 °C. The δ18Owater values of quartz in the molybdenite-bearing veins vary from +2.16 to +4.05‰, suggesting a magmatic origin for the ore-forming fluids. Re-Os isotopic dating of molybdenite indicated a mineralization age of 41.9 ± 3.6 Ma. The Re concentration in molybdenite suggests incorporation of mantle derived melt with crustal materials. The late Eocene magmatism along the western Alborz-Azarbayjan magmatic zone resulted from the Neo-Tethys subduction beneath the Iranian plateau. The Siah-Kamar monzonitic intrusion hosting the Mo deposit, could be considered as an example among the late Eocene intrusions within the western Alborz-Azarbayjan magmatic zone for any further exploration in this zone. 相似文献
16.
The Lemarchant volcanogenic massive sulphide (VMS) deposit (1.24 Mt grading at 0.58% Cu, 5.38% Zn, 1.19% Pb, 1.01 g/t Au, and 59.17 g/t Ag) is a bimodal-felsic VMS deposit hosted within the Late Cambrian (∼513–509 Ma) Tally Pond group of the Exploit Subzone in central Newfoundland, Canada. The deposit is hosted by andesitic volcaniclastic and volcanic rocks with subordinate dacite flows. The mineralisation is hosted by the dacites and is overlain by pillowed and massive basalts.Four structural breaks offset the local stratigraphic sequences including: 1) the LJ syn-volcanic shear zone; 2) the KJ syn-volcanic shear zone; 3) the Lemarchant thrust; and 4) the Bam normal fault. Deformation of the Lemarchant likely occurred during the Penobscot orogeny (486–478 Ma). Early deformation is marked with the local deformation of the LJ and KJ syn-volcanic shear zones during NW-SE compression which coincided with the development of the Lemarchant thrust. A late (<465 Ma) east trending normal fault, the Bam fault, affected the central portion of the Lemarchant area and down-faulted the southern portion of the study area relative to the northern portion.Immobile element systematics of all the sequences from the Lemarchant deposit are tholeiitic with transitional Zr/Y ratios (1.9–6.6), Lan/Smn ratios <1 (normalised to upper crust), and have primitive mantle extended rare earth elements profiles with slight light rare earth element (LREE)-enriched patterns with flat heavy REE (HREE), and weak to strong negative Nb, Zr, and Ti anomalies. Together, these geochemical features, coupled with an FIIIa signature, and existing mineralogical and Nd-Pb isotope data, are consistent with the rocks at the Lemarchant deposit having formed within a shallow (<1500 m) arc or migrating cross-arc seamount chain located within a young peri-continental rifted arc along the margin of Ganderia, within the Iapetus Ocean. The estimated shallow water emplacement of the deposit likely allowed boiling near or at the rock-sea water interface, ultimately resulting in precious metal enrichment of the Lemarchant deposit. It is suggested that cross-arcs within rifted arc environments may represent favourable exploration targets for precious metal-enriched VMS deposits. 相似文献
17.
The Song Hien rift basin is an important metallogenic area in NE Vietnam. This domain consists mainly of Triassic sulfide-rich black shale beds, which play a role as a sedimentary host for various mineral systems such as antimony, mercury and gold-sulfide deposits. Most of gold deposits are hosted in carbonaceous sedimentary rocks, however some deposits, which have similar characteristics, are hosted in fine-grained mafic magmatic rocks. An Ar-Ar isotopic dating of hydrothermal sericite from the sedimentary hosted Bo Va and Khung Khoang gold deposits and intrusion hosted orogenic Hat Han gold deposit yields plateau ages of 184.8 ± 2.1 Ma, 211.63 ± 2.3 Ma, and 209.12 ± 2.3 Ma, respectively. The obtained Ar-Ar ages convincingly show that the orogenic gold deposits in the Song Hien domain were formed in Late Triassic to Early Jurassic, while the age of the Bo Va deposit is at least older than 184.8 ± 2.1 Ma. Loss of argon by volume diffusion, supported by previously reported mineralogical and isotopic features of the Bo Va deposit may suggest that the Jurassic-Cretaceous (Yanshanian) tectonothermal events overprinted some deposits in the Song Hien domain. Formation of gold deposits in the Song Hien domain is linked to the same tectonic event as the Carlin-like gold deposits in SW China and is associated with an extensional tectonic regime that followed continental collision between the Indochina and South China Blocks. The similarity in geology setting and mineral composition of gold deposits of the Song Hien domain and the Golden Triangle region, as well as timing and kinematics of deformation, magmatic features, and stratigraphic sequence and bulk architecture, lead to conclusion that NE Vietnam and SW China is a single metallogenic zone. The study of gold deposits in Vietnam will provide a new data on the metallogenic history of this important part of SE Asia. 相似文献
18.
The Talvivaara deposit contains 1550 Mt of ore averaging 0.22% Ni, 0.13% Cu, 0.49% Zn and 0.02% Co. The precursors of the host rocks were deposited 2.1–1.9 Ga ago in a stratified marine basin. Fractured talc-carbonate rocks delineate the eastern border of the deposit and serpentinites and talc-carbonate rocks occur along the rift-related sequence to the north and south of Talvivaara. Characteristic features are high concentrations of organic carbon and sulphur with median values of 7.6% and 8.2%, respectively. Organic carbon is graphitic at present and a variety of sulphide textures occur, representing multiphase evolution during diagenesis, tectonic deformation and medium-grade regional metamorphism. The main sulphides of the Talvivaara ore are pyrrhotite, pyrite, sphalerite, chalcopyrite and pentlandite. Sulphides occur both as fine-grained disseminations and coarse grains or aggregates. Chalcopyrite mainly occurs in joint surfaces and quartz-sulphide veins and pentlandite occur as inclusions in pyrrhotite. Alabandite (MnS) occurs in black shales and black metacarbonate rocks. The early low-T sulphide minerals were overprinted by later stage processes. No framboidal pyrite is any longer present, but spheroidal pyrite with a grain size of < 0.01 mm and containing up to 0.7% Ni occurs. During the deposition of the organic-rich mud the anoxic/euxinic bottom waters were enriched in Ni+, Cu+ and Zn2 +. Sulphur isotope δ34S values indicate mixing of sulphur derived from different processes or fractionation by sulphate reduction in a restricted basin. Both thermochemical and bacterial sulphate reductions were important for the generation of reduced sulphur. 相似文献
19.
Magnetite is a common mineral in many ore deposits and their host rocks, and contains a wide range of trace elements (e.g., Ti, V, Mg, Cr, Mn, Ca, Al, Ni, Ga, Sn) that can be used for deposit type fingerprinting. In this study, we present new magnetite geochemical data for the Longqiao Fe deposit (Luzong ore district) and Tieshan Fe–(Cu) deposit (Edong ore district), which are important magmatic-hydrothermal deposits in eastern China.Textural features, mineral assemblages and paragenesis of the Longqiao and Tieshan ore samples have suggested the presence of two main mineralization periods (sedimentary and hydrothermal) at Longqiao, among which the hydrothermal period comprises four stages (skarn, magnetite, sulfide and carbonate); whilst the Tieshan Fe–(Cu) deposit comprises four mineralization stages (skarn, magnetite, quartz-sulfide and carbonate).Magnetite from the Longqiao and Tieshan deposits has different geochemistry, and can be clearly discriminated by the Sn vs. Ga, Ni vs. Cr, Ga vs. Al, Ni vs. Al, V vs. Ti, and Al vs. Mg diagrams. Such difference may be applied to distinguish other typical skarn (Tieshan) and multi-origin hydrothermal (Longqiao) deposits in the MLYRB. The fluid–rock interactions, influence of the co-crystallizing minerals and other physicochemical parameters, such as temperature and fO2, may have altogether controlled the magnetite trace element contents of both deposits. The Tieshan deposit may have had higher degree of fO2, but lower fluid–rock interactions and ore-forming temperature than the Longqiao deposit. The TiO2–Al2O3–(MgO + MnO) and (Ca + Al + Mn) vs. (Ti + V) magnetite discrimination diagrams show that the Longqiao Fe deposit has both sedimentary and hydrothermal features, whereas the Tieshan Fe–(Cu) deposit is skarn-type and was likely formed via hydrothermal metasomatism, consistent with the ore characteristics observed. 相似文献
20.
The Lanping–Simao Basin (LSB) is a Mesozoic–Cenozoic continental margin rift basin in Western China. It formed during the opening and closing of the Tethys Ocean. This basin is also known as a “metal belt” as it hosts several metal deposits, besides, the Mengye potash deposit. However, the exact dates of the formation either in the Paleocene or the Cretaceous, and thus the origins of the marine, continental or mixed origins of the Mengye deposits, remain disputed. Based on the basin's evolution, materials of marine origin and/or remnant seawater should be present, but instead the salt layers of the Mengye potash deposit present typically continental lithological features. This study examines and reviews evaporative minerals, Br/Cl and I/Cl molar ratios, and isotopes of S, B, and Sr·I and I/Cl data for this area has not been previously reported. The basin's evaporative minerals are dominated by halite and sylvite. The amounts of anhydrite, chlorocalcite, langbeinite, glaserite, tachyhydrite and glauberite are small. All of these form in both marine and continental environments. The values of I and the I/Cl molar ratios of halite and sylvite are from 0.07 to 0.27 ppm, and from 0.03 to 0.11 × 10− 6, respectively, dependent on organic substances. Br and molar Br/Cl values are from 89.08 to 555.45 ppm and from 0.06 × 10− 3 to 0.38 × 10− 3, respectively. All of the Br/Cl molar ratios are lower than those of seawater, and most of them are < 0.1, suggesting continental or mixed origin. Previously published δ34S, δ11B and 87Sr/86Sr values for evaporative minerals indicate a continental origin for the Mengye potash deposit. However, materials of hydrothermal origin are widely distributed in the basin and may have played an active role for the formation of the potash deposit. Thus the Mengye potash deposit could be of continental origin, with a remnant seawater trace. 相似文献