首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 484 毫秒
1.
The fresh and weathered garnet amphibolites, from the Akom II area in the Archaean Congo Craton, were investigated to determine the S, Cu, Ni, Cr, and Au-PGE values. The garnet amphibolites are composed of amphibole, plagioclase, garnet, quartz, and accessory apatite, spinel, sericite, pyrite, chalcopyrite and non-identified opaque minerals. The presence of apatite, sericite, and two generations of opaque minerals suggests that they might be affected by hydrothermal alteration. They are characterized by moderate Al2O3, Fe2O3, CaO, V, Zn, and Co contents with negative Eu- and Ce-anomalies. The sulfur concentrations are variable (380–1710 ppm). According to the sulfur contents, amphibolites can be grouped into two: amphibolites with low contents, ranging between 380 and 520 ppm (av. = 457 ppm); and amphibolites with elevated contents, varying from 1140 to 1710 ppm (av. = 1370 ppm). Amphibolites contain contrast amounts of Cu (∼ 1800 to 5350 ppm) while nickel contents attain 121 ppm. Chromium contents vary from 43 to 194 ppm. Sulfur correlates positively with Cu and Cr, but negatively with Ni and Ni/Cr ratio. The total Au-PGE contents attain 59 ppb.The presence of amphibole and feldspars confirms the low degree of amphibolite weathering. The secondary minerals are constituted of kaolinite, gibbsite, goethite and hematite. Despite the accumulation of some elements, the major and trace element distribution is quite similar to that of fresh amphibolites. Nevertheless, the weathering processes lead to the depletion of several elements such as S (239–902 ppm), Cu (520–2082 ppm), and Ni (20–114 ppm). Chromium and Au-PGE show an opposite trend marked by a slight enrichment in the weathered amphibolites. Amidst the Au-PGE, Pd (60 ppb) and Pt (23 ppb) have elevated contents in the fresh rocks as well as in the weathered materials. The PPGE contents are much higher than IPGE contents in both types of materials. The Pd/Pt, Pd/Rh, Pd/Ru, Pd/Ir, Pd/Os, and Pd/Au values indicate that Pt, Rh, Ru, Ir, Os and Au are more mobile than Pd. Chondrite-normalized base metal patterns confirm the abundance of Pd and the slight enrichment of Au-PGE in weathered rocks. Palladium, Rh and Ir are positively correlated with S. Conversely Pt and Ru are negatively correlated with S and Au is not correlated with S. Despite the high and variable S and Cu contents, the garnet amphibolites possess low Au-PGE and other base metals contents.  相似文献   

2.
Vein-type gold deposits in the Atud area are related to the metagabbro–diorite complex that occurred in Gabal Atud in the Central Eastern Desert of Egypt. This gold mineralization is located within quartz veins and intense hydrothermal alteration haloes along the NW–SE brittle–ductile shear zone, as well as along the contacts between them. By using the mass balance calculations, this work is to determine the mass/volume gains and losses of the chemical components during the hydrothermal alteration processes in the studied deposits. In addition, we report new data on the mineral chemistry of the alteration minerals to define the condition of the gold deposition and the mineralizing fluid based on the convenient geothermometers. Two generations of quartz veins include the mineralized grayish-to-white old vein (trending NW–SE), and the younger, non-mineralized milky white vein (trending NE–SW). The ore minerals associated with gold are essentially arsenopyrite and pyrite, with chalcopyrite, sphalerite, enargite, and goethite forming during three phases of mineralization; first, second (main ore), and third (supergene) phases. Three main hydrothermal alteration zones of mineral assemblages were identified (zones 1–3), placed around mineralized and non-mineralized quartz veins in the underground levels. The concentrations of Au, Ag, and Cu are different from zone to zone having 25–790 ppb, 0.7–69.6 ppm, and 6–93.8 ppm; 48.6–176.1 ppb, 0.9–12.3 ppm, and 39.6–118.2 ppm; and 53.9–155.4 ppb, 0.7–3.4 ppm, and 0.2–79 ppm for zones 1, 2, and 3, respectively.The mass balance calculations and isocon diagrams (calculated using the GEOISO-Windows program) revealed the gold to be highly associated with the main mineralized zone as well as sericitization/kaolinitization and muscovitization in zone 1 more than in zones 2 and 3. The sericite had a higher muscovite component in all analyzed flakes (average XMs = 0.89), with 0.10%–0.55% phengite content in wall rocks and 0.13%–0.29% phengite content in mineralized quartz veins. Wall rocks had higher calcite (CaCO3) contents and lower MgCO3 and FeCO3 contents than the quartz veins. The chlorite flakes in the altered wall rocks were composed of pycnochlorite and ripidolite, with estimated formation temperatures of 289–295 °C and 301–312 °C, respectively. Albite has higher albite content (95.08%–99.20%) which occurs with chlorite in zone 3.  相似文献   

3.
Gold and platinum group minerals from the gold placers of the South Urals are studied in order to identify the metal sources. In placers from the Main Uralian fault zone (MUF), the primary gold contains Ag (up to 29 wt.%), Cu (up to 2 wt.%) and Hg (up to 4 wt.%) and its fineness ranges from 538 to 997‰. Tetra-auricupride and cupriferous gold (up to 20 wt.% Cu) are common for the Nizhny Karabash placer of the MUF zone. In the eastern part of the South Urals, the placer gold is mainly characterized by high fineness of 900–1000‰ and low Cu contents (max 1.38 wt.%). Most of the placer gold grains consist of the primary domains, which are rimmed by secondary high-fineness gold with diffuse and clear boundaries. The secondary gold also develops along the shear dislocations of primary gold. Gold contains microinclusions of geerite, balkanite, chalcopyrite, Se-bearing galena, sphalerite, pyrite, pyrrhotite, arsenopyrite and hematite.Twenty four (including five unnamed) platinum group minerals (PGMs) were found in 28 placers; those from the Kialim and Maly Iremel placers of the Miass placer zone were studied in details. In the Kialim placer, ruthenium is most abundant PGM, which hosts microinclusions of isoferroplatinum, ferroan platinum, laurite, cupriferous gold, a mineral similar in composition to tolovkite, heazlewoodite and unnamed RhSbS phase. The osmium contains microinclusions of erlichmanite and laurite. The iridium grains hosts various sulfides and arsenides of platinum group elements (PGEs). The inclusion-free PGMs form Ru compositional trend in contrast to Os–Ru trend of the Ir-depleted inclusion-hosted PGMs. The isoferroplatinum from the Maly Iremel placer hosts laurite, rhodarsenite, bowieite, a mineral similar in composition to miassite and unnamed sulfide of Pt (Pt1.11S2.00) and antimonide of Pd ((Pd2.41Rh0.43Fe0.17)3.01(Sb0.91Te0.09)1.00). Ruthenium is a host to isoferroplatinum, PGE sulfides and arsenides, and heazlewoodite. Osmium contains microinclusions of ferroan platinum; iridium is a host to a mineral similar in composition to hongshiite. Three types of PGM intergrowths were identified in the Maly Iremel samples: (1) the intergrowths of platy grains of ruthenium with isoferroplatinum and a mineral similar in composition to tulameenite; (2) the open-latticework intergrowths of platy crystals of ruthenium with interstitial aggregates made up of gold, isoferroplatinum and a mineral similar in composition to xingzhongite and (3) the intergrowths of osmium and irarsite and iridarsenite, which are developed along cleavage of the osmium grains. Nickel sulfides associated with some PGMs contain Ru (11.32 wt.%) and Rh (2.21 wt.%) in millerite and Ir (31.00 wt.%), Ru (5.81 wt.%) and Rh (2.87 wt.%) in vaesite.The primary metal sources were determined on the basis of the mineral assemblages and composition of minerals, taking into account the nearby mineral deposits and directions of rivers. The rodingite-associated gold, gold-bearing massive sulfide and chromite deposits are major sources of gold and PGMs in placers of the Miass placer zone confined to the MUF structure of the South Urals. In the southern part of this structure, gold was mainly originated from orogenic gold–sulfide deposits associated with volcanic/volcaniclastic rocks and listvenite-associated gold deposits. The placer PGMs were derived from the adjacent ultramafic massifs of ophiolitic origin. The distance between the placers and primary deposits varies from 2 to 5 km (up to 20 km in the extended valley of the Miass River). Usage of ore microinclusions and associated PGMs in study of placer gold is far more advanced than an ordinary consideration of gold composition alone. This approach allowed us to identify the concrete sources for individual placers and to predict some mineralogical findings in already known primary occurrences.  相似文献   

4.
Mineralogical studies of the heavy fraction from a Holocene pyrope-rich garnet placer deposit at Vestřev (Krkonoše Piedmont Basin, Bohemian Massif) have identified the presence of very rare grains of platinum group minerals (PGM). Pt–Fe alloy grains are accompanied by Os–Ir–Ru minerals (native osmium, iridium, and ruthenium) with inclusions of Pt–Fe alloy and hongshiite (PtCu). This mineral assemblage is typical for several mantle settings including ophiolites. The chemistry of the Os–Ir–Ru minerals shows an enrichment of the PGM in Ru, which is typical of ophiolites. The grain morphology of PGM and pyrope-rich garnet (mostly rounded with numerous euhedral/subhedral grains) does not exclude a common source. In-situ laser-ablation MC-ICP-MS was used to measure the Re–Os isotopic compositions of single Os-rich grains, which show heterogeneous subchondritic Os isotopic compositions (187Os/188Os = 0.12082–0.12505 ± 0.00003). This precludes their low-temperature origin and indicates derivation of platinum-group elements (PGEs) essentially from mantle-derived rocks without a significant contribution of crustal Os. The mantle model age (TMA) and Re-depletion model age (TRD) model ages range from ~ 0.4 to ~ 1.0 Ga and most likely reflect a long history of melt depletion that affected the mantle sources of PGM.  相似文献   

5.
Distribution of water among the main rock-forming nominally anhydrous minerals of mantle xenoliths of peridotitic and eclogitic parageneses from the Udachnaya kimberlite pipe, Yakutia, has been studied by IR spectroscopy. The spectra of all minerals exhibit vibrations attributed to hydroxyl structural defects. The content of H2O (ppm) in minerals of peridotites is as follows: 23–75 in olivine, 52–317 in orthopyroxene, 29–126 in clinopyroxene, and 0–95 in garnet. In eclogites, garnet contains up to 833 ppm H2O, and clinopyroxene, up to 1898 ppm (~ 0.19 wt.%). The obtained data and the results of previous studies of minerals of mantle xenoliths show wide variations in H2O contents both within different kimberlite provinces and within the Udachnaya kimberlite pipe. Judging from the volume ratios of mineral phases in the studied xenoliths, the water content varies over narrow ranges of values, 38–126 ppm. At the same time, the water content in the studied eclogite xenoliths is much higher and varies widely, 391–1112 ppm.  相似文献   

6.
The Upper Cretaceous Nakhlak epigenetic vein-type Pb(Ag) deposit is located 55 km northeast of the town of Anarak in Isfahan Province, Iran. The deposit contains 7 Mt of galena-barite ore with an average grade of 8.33% Pb, 0.38% Zn, and 72 ppm Ag. The ore mineralization occurs as stratabound, epigenetic, steeply dipping, east-west–trending veins in faulted- or fracture-controlled Upper Cretaceous Sadar carbonates. Galena and barite are the primary minerals. Minor sphalerite, tennantite-tetrahedrite, pyrite, and chalcopyrite occur as inclusions in galena. Cerussite with minor amounts of anglesite and plattnerite formed in the oxidized supergene zone. The ore and ore-related minerals were deposited in the hydrothermally dolomitized carbonate host rock containing saddle-shaped dolomite. Geochemically, the dolomitized carbonate host rocks are enriched in MgO, Fe2O3, MnO, Pb, Zn, and Ba, but depleted in CaO. The galena concentrate contains high values of Ag (932 ppm), Sb (342 ppm), Cu (422 ppm), As (91 ppm), and Zn (296 ppm); the presence of these trace elements indicates a low-temperature type of galena mineralization. This interpretation is corroborated by fluid inclusions containing 12.98 wt.% NaCl equivalent salinity; the inclusions homogenize at the low temperature of about 152.1 °C. The similarity between δ34S(V-CDT) values in Nakhlak barite and Permian–Triassic δ34S marine sulfate values indicates that the Nakhlak sulfur was probably provided from evaporates of Permian–Triassic age. The δ34S(V-CDT) values of galena and barite samples occupy the ranges of − 1.04‰ to + 8.62‰ and + 10.95‰ to + 13.71‰, respectively, and are similar to Mississippi Valley–type (MVT) deposits. The low-temperature basinal fluids, evaporate-originated sulfur, and fault- or fracture-controlled galena-rich veins in the Nakhlak deposit resemble the type of geological features documented in Pb-rich MVT deposits.  相似文献   

7.
The Devonian (ca. 385–360 Ma) Kola Alkaline Province includes 22 plutonic ultrabasic–alkaline complexes, some of which also contain carbonatites and rarely phoscorites. The latter are composite silicate–oxide–phosphate–carbonate rocks, occurring in close space-time genetic relations with various carbonatites. Several carbonatites types are recognized at Kola, including abundant calcite carbonatites (early- and late-stage), with subordinate amounts of late-stage dolomite carbonatites, and rarely magnesite, siderite and rhodochrosite carbonatites. In phoscorites and early-stage carbonatites the rare earth elements (REE) are distributed among the major minerals including calcite (up to 490 ppm), apatite (up to 4400 ppm in Kovdor and 3.5 wt.% REE2O3 in Khibina), and dolomite (up to 77 ppm), as well as accessory pyrochlore (up to 9.1 wt.% REE2O3) and zirconolite (up to 17.8 wt.% REE2O3). Late-stage carbonatites, at some localities, are strongly enriched in REE (up to 5.2 wt.% REE2O3 in Khibina) and the REE are major components in diverse major and minor minerals such as burbankite, carbocernaite, Ca- and Ba-fluocarbonates, ancylite and others. The rare earth minerals form two distinct mineral assemblages: primary (crystallized from a melt or carbohydrothermal fluid) and secondary (formed during metasomatic replacement). Stable (C–O) and radiogenic (Sr–Nd) isotopes data indicate that the REE minerals and their host calcite and/or dolomite have crystallized from a melt derived from the same mantle source and are co-genetic.  相似文献   

8.
The Tieshan Fe–Cu deposit is located in the Edong district, which represents the westernmost and largest region within the Middle–Lower Yangtze River Metallogenic Belt (YRMB), Eastern China. Skarn Fe–Cu mineralization is spatially associated with the Tieshan pluton, which intruded carbonates of the Lower Triassic Daye Formation. Ore bodies are predominantly located along the contact between the diorite or quartz diorite and marbles/dolomitic marbles. This study investigates the mineral chemistry of magnetite in different skarn ore bodies. The contrasting composition of magnetite obtained are used to suggest different mechanisms of formation for magnetite in the western and eastern part of the Tieshan Fe–Cu deposit. A total of 178 grains of magnetite from four magnetite ore samples are analyzed by LA–ICP–MS, indicating a wide range of trace element contents, such as V (13.61–542.36 ppm), Cr (0.003–383.96 ppm), Co (11.12–187.55 ppm) and Ni (0.19–147.41 ppm), etc. The Ti/V ratio of magnetite from the Xiangbishan (western part of the Tieshan deposit) and Jianshan ore body (eastern part of the Tieshan deposit) ranges from 1.32 to 5.24, and 1.31 to 10.34, respectively, indicating a relatively reduced depositional environment in the Xiangbishan ore body. Incorporation of Ti and Al in magnetite are temperature dependent, which hence propose that the temperature of hydrothermal fluid from the Jianshan ore body (Al = 3747–9648 ppm, with 6381 ppm as an average; Ti = 381.7–952.0 ppm, with 628.2 ppm as an average) was higher than the Xiangbishan ore body (Al = 2011–11122 ppm, with 5997 ppm as an average, Ti = 302.5–734.8, with 530.8 ppm as an average), indicating a down–temperature precipitation trend from the Jianshan ore body to the Xiangbishan ore body. In addition, in the Ca + Al + Mn versus Ti + V diagram, magnetite is plotted in the skarn field, consideration with the ternary diagram of TiO2–Al2O3–MgO, proposing that the magnetite ores are formed by replacement, instead of directly crystallized from iron oxide melts, which provide a better understanding regarding the composition of ore fluids and processes responsible for Fe mineralization in the Tieshan Fe–Cu deposit.  相似文献   

9.
Post-collisional ultrapotassic magmatic rocks (15.2–18.8 Ma), containing mantle xenoliths, are extensively distributed in the Sailipu volcanic field of the Lhasa terrane in south Tibet. They could be subdivided into high-MgO and low-MgO subgroups based on their petrological and geochemical characteristics. The high-MgO subgroup has olivine-I (Fo87–92), phlogopite and clinopyroxene as phenocryst phases, while the low-MgO subgroup consists mainly of phlogopite, clinopyroxene and olivine-II (Fo77–89). These ultrapotassic magmatic rocks have high MgO (4.6–14.5 wt%), Ni (145–346 ppm), Cr (289–610 ppm) contents, and display enrichment in light rare earth element (REE) over heavy REE and enriched large ion lithophile elements (LILE) relative to high field strength elements (HFSE) with strongly negative Nb-Ta-Ti anomalies in primitive mantle-normalized trace element diagrams. They have extremely radiogenic (87Sr/86Sr)i (0.7167–0.7274) and unradiogenic (143Nd/144Nd)i (0.5118–0.5120), high (207Pb/204Pb)i (15.740–15.816) and (208Pb/204Pb)i (39.661–39.827) at a given (206Pb/204Pb)i (18.363–18.790) with high δ18O values (7.3–9.7‰). Strongly linear correlations between depleted mid-ocean ridge basalt-source mantle (DMM) and the Indian continental crust (HHCS) in Sr-Nd-Pb-O isotopic diagrams indicate that the geochemical features could result from reaction between mantle peridotite and enriched components (fluids and melts) released by the eclogitized Indian continental crust (HHCS) in the mantle wedge. The high-MgO (13.7–14.5 wt%) subgroup displays higher (143Nd/144Nd)i, lower (87Sr/86Sr)i and (206Pb/204Pb)i ratios and lower δ18O values compared with the low-MgO (4.6–8.8 wt%) subgroup. High Ni (850–4862 ppm) contents of olivine phenocrysts and high whole-rock SiO2, NiO, low CaO contents indicate that the low-MgO ultrapotassic magmatic rocks are derived from partial melting of olivine-poor mantle pyroxenite. However, lower Ni concentrations of olivine phenocryst and lower whole-rock SiO2, NiO, higher CaO contents of the high-MgO ultrapotassic rocks may indicate their peridotite mantle source. This could be attributed to different amounts of silicate-rich components added into the mantle sources of the parental magmas in the mantle wedge caused by the northward subduction of the Indian continental lithosphere. The reaction-formed websterite xenoliths, reported for the first time in this study, are made up of anhedral and interlocking clinopyroxene (45–65 vol%) and orthopyroxene (30–50 vol%) with minor phlogopite (< 3 vol%) and quartz (< 2 vol%) and are suggested to be formed by silicate metasomatism of the mantle peridotite. The harzburgites, another major type of mantle xenolith in south Tibet, have a mineral assemblage of olivine (60–75 vol%), orthopyroxene (20–35 vol%), clinopyroxene (< 3 vol%), phlogopite (< 2 vol%) and spinel (< 2 vol%) and may have experienced subduction-related metasomatism. Combined with two types of ultrapotassic magmas, we propose that compositions of mantle wedge beneath south Tibet may gradually evolve from harzburgite through lherzolite to websterite with strong metasomatism of silicate-rich components in their mantle source region. Partial melting of the enriched mantle sources could be triggered by rollback of Indian continental slab during 25–8 Ma in south Tibet.  相似文献   

10.
The Ebrahim-Attar (EBAT) leucogranite body is intruded within the Jurassic metamorphic complex of the Ghorveh area, located in the northern part of the Sanandaj Sirjan zone (SaSZ) of northwest Iran. The granite comprises alkali feldspar, quartz, Na-rich plagioclase and to a lesser extent, muscovite and biotite. Garnet and beryl are also observed as accessory minerals. Additionally, high SiO2 (71.4–81.0wt %) and Rb (145–440 ppm) content; low MgO (<0.12wt %), Fe2O3 (< 0.68 wt.%), Sr (mainly < 20 ppm), Ba (<57 ppm), Zr (10–53 ppm) and rare earth elements (REEs) low content (3.88–94.9 ppm with an average = 21.2 ppm); and flat REE patterns with a negative Eu anomaly characterize these rocks. The chemical composition and mineral paragenesis indicate that the rocks were formed by the partial melting of siliciclastic to pelitic rocks and can be classified as per-aluminous leucogranite or strongly per-aluminous (SP) granite. The Rb-Sr whole rock and mineral isochrons confirm that crystallization of the body occurred at 102.5 ± 6.1 Ma in Albian. The 87Sr/86Sr(i) and 143Nd/144Nd(i) ratios are 0.7081 ± 0.009 and 0.51220 ± 0.00005, respectively, and εNd(t) values range from −5.8 to −1.6. These values verify that the source of this body is continental crust. The Nd model ages (TDM2) vary between 1.0 and 1.3 Ga and are more consistent with the juvenile basement of Pan African crust. Based on these results, we suggest that the upwelling of the hot asthenospheric mantle in the SaSZ (likely during the Neo-Tethys rollback activity) occurred after the late Cimmerian orogeny. Consequently, we suggest that this process was responsible for a thinning and heating of the continental crust, from which the SP granite was produced by the partial melting of muscovite rich in pelitic or felsic-metapelitic rocks in the northern SaSZ.  相似文献   

11.
The Northern Ultramafic Centre (NUC) of the Lac des Iles Complex, Northwest Ontario hosts several platinum group element (PGE) occurrences, including the Sutcliffe Zone, which consists of four subparallel, stratiform PGE-enriched intervals exposed within the cyclically layered eastern flank of the NUC. Field relationships, mineral paragenesis and lithogeochemistry allowed for the identification of 14 cyclic cumulate sequences of two distinct types – Cyclic unit type A (CUA) and Cyclic unit type B (CUB). CUA-type and CUB-type units are interpreted to have formed from a Si-enriched and Si-poor parent magmas, respectively. PGE-enriched intervals occur in four of the CUA-type cyclic units (CUA-5, -6, -8 and -11). PGE enriched intervals are commonly associated with websterite, olivine websterite and gabbronorite containing primary disseminated sulfide (0.2–2 vol%) which are dominated by pyrrhotite, chalcopyrite, and pentlandite with minor cubanite, and troilite. In hydrothermally altered rocks enriched in PGE, primary sulfides are locally partially replaced by secondary chalcopyrite, sphalerite, heazlewoodite, and chalcocite. Palladium occurs either in solid solution with primary pentlandite or is associated with platinum group minerals (PGM) such as Pd-plumbide, Pd-telluride, and Pt-bismuthotelluride. PGMs commonly occur within primary sulfides, at contacts between primary sulfide–silicate minerals, or in association with secondary serpentine and actinolite. Gold and silver typically occur as electrum that exhibits similar textural characteristics and mineralogical associations as the PGMs.Two different chemostratigraphic patterns of PGE, Cu and S enrichment can be recognized among the mineralized CUA cycles: The first (top-loaded) occurs near the top of CUA cycles (CUA-6, -8 and -11) in websterite and/or gabbronorite, just below the levels at which CUB magmas were emplaced. The second (middle-loaded), occurs midway through the lower cycle (CUA-5) in the olivine websterite, which is overlain by CUA-6. Within the four mineralized intervals, PGE tenors average 643 ppm Pd + Pt (in 100% sulfide), Pd/Pt and Pd/Ir ratios range from 0.9 to 3.5 and 35 to 537, respectively, and S/Se ratios range between 500 and 6000. The highest PGE tenors (4377 ppm Pd + Pt) are found in the lowermost interval in serpentinized olivine websterite and have an average Pd/Pt ratio of 3.5 and a S/Se ratio of approximately 2000.It is proposed that orthomagmatic processes of fractional crystallization and dynamic magma recharge were the dominant mineralization processes triggering sulfide-saturation and PGE concentration at the Sutcliffe Zone. Textural relationships between PGM, sulfide minerals, and primary and secondary hydrous silicates suggest that late magmatic to postcumulus hydrothermal fluid infiltration occurred locally during and after sulfide mineralization of the PGE-enriched intervals. However, these fluids had a minimal effect on the distribution of PGE in the Sutcliffe Zone. The Sutcliffe Zone shares many similarities with classic stratiform PGE deposits in terms of Pd/Pt ratio, high PGE tenors, low abundance of sulfide, and PGM assemblages. However, it is distinguished from most stratiform PGE deposits by its tectonic environment and lithostratigraphic position and by the intimate spatial association of the two parental magmas that are interpreted to have been responsible for the observed chemostratigraphy and PGE enrichment.  相似文献   

12.
The Dongping gold deposit hosted in syenites is one of the largest hydrothermal gold deposits in China and composed of ore veins in the upper parts and altered zones in the lower parts of the ore bodies. Pervasive potassic alteration and silicification overprint the wall rocks of the ore deposit. The alteration minerals include orthoclase, microcline, perthite, quartz, sericite, epidote, calcite, hematite and pyrite, with the quartz, pyrite and hematite assemblages closely associated with gold mineralization. The phases of hydrothermal alteration include: (i) potassic alteration, (ii) potassic alteration - silicification, (iii) silicification - epidotization - hematitization, (iv) silicification - sericitization - pyritization and (v) carbonation. Mass-balance calculations in potassic altered and silicified rocks reveal the gain of K2O, Na2O, SiO2, HFSEs and transition elements (TEs) and the loss of REEs. Most major elements were affected by intense mineral reactions, and the REE patterns of the ore are consistent with those of the syenites. Gold, silver and tellurium show positive correlation and close association with silicification. Fluid inclusion homogenization temperatures in quartz veins range from 154 °C to 382 °C (peak at 275 °C–325 °C), with salinities of 4–9 wt.% NaCl equiv. At temperatures of 325 °C the fluid is estimated to have pH = 3.70–5.86, log fO2 = − 32.4 to − 28.1, with Au and Te transported as Au (HS)2− and Te22 − complexes. The ore forming fluids evolved from high pH and fO2 at moderate temperatures into moderate-low pH, low fO2 and low temperature conditions. The fineness of the precipitated native gold and the contents of the oxide minerals (e.g., magnetite and hematite) decreased, followed by precipitation of Au- and Ag-bearing tellurides. The hydrothermal system was derived from an alkaline magma and the deposit is defined as an alkaline rock-hosted hydrothermal gold deposit.  相似文献   

13.
The Mombi bauxite deposit is located in 165 km northwest of Dehdasht city, southwestern Iran. The deposit is situated in the Zagros Simply Fold Belt and developed as discontinuous stratified layers in Upper Cretaceous carbonates (Sarvak Formation). Outcrops of the bauxitic horizons occur in NW-SE trending Bangestan anticline and are situated between the marine neritic limestones of the Ilam and Sarvak Formations. From the bottom to top, the deposit is generally consisting of brown, gray, pink, pisolitic, red, and yellow bauxite horizons. Boehmite, diaspore, kaolinite, and hematite are the major mineral components, while gibbsite, goethite, anatase, rutile, pyrite, chlorite, quartz, as well as feldspar occur to a lesser extent. The Eh–pH conditions during bauxitization in the Mombi bauxite deposit show oxidizing to reducing conditions during the Upper Cretaceous. This feature seems to be general and had a significant effect on the mineral composition of Cretaceous bauxite deposits in the Zagros fold belt. Geochemical data show that Al2O3, SiO2, Fe2O3 and TiO2 are the main components in the bauxite ores at Mombi and immobile elements like Al, Ti, Nb, Zr, Hf, Cr, Ta, Y, and Th were enriched while Rb, Ba, K, Sr, and P were depleted during the bauxitization process. Chondrite-normalized REE pattern in the bauxite ores indicate REE enrichment (ΣREE = 162.8–755.28 ppm, ave. ∼399.36 ppm) relative to argillic limestone (ΣREE = 76.26–84.03 ppm, ave. ∼80.145 ppm) and Sarvak Formation (ΣREE = 40.15 ppm). The REE patterns also reflect enrichment in LREE relative to HREE. Both positive and negative Ce anomalies (0.48–2.0) are observed in the Mombi bauxite horizons. These anomalies are related to the change of oxidation state of Ce (from Ce3+ to Ce4+), ionic potential, and complexation of Ce4+ with carbonate compounds in the studied horizons. It seems that the variations in the chemistry of ore-forming solutions (e.g., Eh and pH), function of carbonate host rock as a geochemical barrier, and leaching degree of lanthanide-bearing minerals are the most important controlling factors in the distribution and concentration of REEs. Several lines of evidences such as Zr/Hf and Nb/Ta ratios as well as similarity in REE patterns indicate that the underlying marly limestone (Sarvak Formation) could be considered as the source of bauxite horizons. Based on mineralogical and geochemical data, it could be inferred that the Mombi deposit has been formed in a karstic environment during karstification and weathering of the Sarvak limy Formation.  相似文献   

14.
Hydrothermal vein-type deposits of the Kabadüz region (Ordu, NE-Turkey) are located in Upper Cretaceous andesitic–basaltic rocks and were formed in fault zones along NW–SE direction lines, with thicknesses varying between a few centimetres up to 2 m. The primary mineral paragenesis of the many different ore veins consists of pyrite, chalcopyrite, sphalerite, galena and tetrahedrite–tennantite, with quartz and lesser amounts of calcite and barite as gangue minerals. Electron microprobe analyses indicate that the sphalerite and tetrahedrite–tennantite have low Fe contents, with values less than 3.37 wt.% and 1.56 wt.%, respectively. The very low Ni and Co contents of the pyrites (< 0.04 wt.%) and the Zn/Cd ratio of the sphalerite (~ avg. 100) indicate that the hydrothermal solutions were related to felsic magmatic activity. The homogenisation temperatures and calculated salinity data vary between 180–436 °C and 0.4–14.7 NaCl % eq., respectively. A well-defined negative correlation between the Th and the salinity data suggests that meteoric water was involved in the hydrothermal solutions. Based on the measured first melting temperatures, CaCl2, MgCl2, NaCl and KCl were dominant in the fluid inclusions. The δ34S compositions of the pyrite, chalcopyrite, sphalerite, and galena mineral separates of the investigated ore veins were measured at between 2.14 and − 1.47‰, and the oxygen and hydrogen isotope compositions varied between 7.8–8.5‰ and − 40 − 57‰, respectively. Based on the sulphur, oxygen and hydrogen isotope compositions, magmatic sources were confirmed for the hydrothermal solutions. Taking into account all of the above data and the granitic intrusions around the area, we concluded that younger granitic intrusions were responsible for the ore mineralisation around the Kabadüz region.  相似文献   

15.
We determined the rock types, the authigenic minerals, the paragenetic sequence, and the origin of dawsonite in pyroclastic rocks from the Yimin Formation of Beier Sag in the Hailar Basin, China. Dawsonite, a diagenetic mineral, is thought to result from a large influx of CO2 and, therefore, this system represents a natural analogue for in-situ mineral carbon storage. The studied host rocks are mainly tuffs/tuffaceous sandstones which now contain up to 70 vol% authigenic carbonates, including dawsonite, ankerite, and siderite. The initial alteration of the tuffs yielded minor siderite. Kaolinite, illite and mixed illite/smectite then formed as product phases. Dawsonite and quartz subsequently precipitated in response to CO2 influx apparently coupled to feldspar and perhaps kaolinte dissolution. Dawsonite reaches a maximum 25 vol% of the bulk rock. Mass balance suggests that this CO2 influx was coupled to the external import of sodium and export of SiO2. Ankerite and additional siderite precipitated during the late-stage alkaline diagenesis. The carbon isotope values of the dawsonite are in the range −4.1‰ to −2.2‰, indicating the magmatic origin of the CO2. Vitrinite reflectance and thermal gradient constraints suggest that the dawsonite at this location formed at a temperature of ∼75 °C.  相似文献   

16.
The SW England ore region contains significant amounts of indium (In) in Early Permian granite-related skarn and lode parageneses and, to a lesser extent, Triassic epithermal “crosscourse” veins. Ore parageneses that predate granite emplacement (Devonian and Lower Carboniferous sedimentary exhalative and vein parageneses) are largely devoid of In. Cadmium (Cd) and gallium (Ga) occur widely in all sulphide-bearing parageneses across the region with sphalerite concentrations locally reaching 1.74 wt% Cd and 1750 ppm Ga.Indium displays a strong affinity to sulphide-bearing magmatic-hydrothermal parageneses. It occurs in silicate-sulphide skarns, polymetallic sulphide lodes and sulphide-bearing portions of greisen-bordered sheeted vein systems and quartz-tourmaline lodes across the region. Magnetite-silicate skarns and quartz-tourmaline lodes that are devoid of sulphide, in contrast, were comparatively unfavourable for In precipitation. The highest In concentrations are found in mineral lodes associated with the Carnmenellis and St Agnes granites, which are the districts that had the highest historical production of Sn. Total In concentrations in these areas locally exceed 430 ppm, while concentrations elsewhere are systematically below 200 ppm.The principal In hosts are chalcopyrite, sphalerite and stannite group minerals with local concentrations within cassiterite and tennantite. Surprisingly, chalcopyrite accounts for the majority of the In budget throughout the region, although concentrations are highest in sphalerite and stannite group minerals. Sphalerite locally contains up to 1.42 wt% In, chalcopyrite has up to 2200 ppm and stannite group minerals up to 6800 ppm. No In was detected in löllingite, arsenopyrite, rutile, haematite, magnetite, tourmaline, biotite, chlorite, galena, bornite, chalcocite or pyrrhotite. Scattered concentrations in pyrite relate to impurities rather than incorporation by solid solution. Roquesite and possibly dzhalindite or native In formed locally where In-bearing chalcopyrite or sphalerite has been replaced by bornite and quartz. The In partitioning between sphalerite and chalcopyrite varies broadly between 1:1 and 10:1.Sporadic In was included in Triassic crosscourse veins as a result of interactions between migrating CaCl2-rich basinal brines and earlier formed granite-related parageneses. The interactions involved at least two distinct components: 1) Incorporation of clasts of magmatic-hydrothermal veins in crosscourse veins during faulting, and 2) Dissolution and re-precipitation of magmatic-hydrothermal vein minerals in crosscourse fluids. Local concentrations reach 140 ppm In.The magmatic-hydrothermal parageneses in SW England are comparable to the South China Tin Belt, Mount Pleasant, as well as Erzgebirge/Krušné Hory. Magmatic-hydrothermal fluids associated with peraluminous granites have developed a variety of skarn, greisen, lode and veins parageneses by interactions with their host rocks and contained fluids. Crosscourse epithermal mineralisation occurred as In was transported by CaCl2-rich basinal brines in a similar manner as In-bearing veins in the West Shropshire ore field.  相似文献   

17.
The Eocene (ca. 55–38 Ma) Bear Lodge alkaline complex in the northern Black Hills region of northeastern Wyoming (USA) is host to stockwork-style carbonatite dikes and veins with high concentrations of rare earth elements (e.g., La: 4140–21000 ppm, Ce: 9220–35800 ppm, Nd: 4800–13900 ppm). The central carbonatite dike swarm is characterized by zones of variable REE content, with peripheral zones enriched in HREE including yttrium. The principle REE-bearing phases in unoxidized carbonatite are ancylite and carbocernaite, with subordinate monazite, fluorapatite, burbankite, and Ca-REE fluorocarbonates. In oxidized carbonatite, REE are hosted primarily by Ca-REE fluorocarbonates (bastnäsite, parisite, synchysite, and mixed varieties), with lesser REE phosphates (rhabdophane and monazite), fluorapatite, and cerianite. REE abundances were substantially upgraded (e.g., La: 54500–66800 ppm, Ce: 11500–92100 ppm, Nd: 4740–31200 ppm) in carbonatite that was altered by oxidizing hydrothermal and supergene processes. Vertical, near surface increases in REE concentrations correlate with replacement of REE(±Sr,Ca,Na,Ba) carbonate minerals by Ca-REE fluorocarbonate minerals, dissolution of matrix calcite, development of Fe- and Mn-rich gossan, crystallization of cerianite and accompanying negative Ce anomalies in secondary fluorocarbonates and phosphates, and increasing δ18O values. These vertical changes demonstrate the importance of oxidizing meteoric water during the most recent modifications to the carbonatite stockwork. Scanning electron microscopy, energy dispersive spectroscopy, and electron probe microanalysis were used to investigate variations in mineral chemistry controlling the lateral complex-wide geochemical heterogeneity. HREE-enrichment in some peripheral zones can be attributed to an increase in the abundance of secondary REE phosphates (rhabdophane group, monazite, and fluorapatite), while HREE-enrichment in other zones is a result of HREE substitution in the otherwise LREE-selective fluorocarbonate minerals. Microprobe analyses show that HREE substitution is most pronounced in Ca-rich fluorocarbonates (parisite, synchysite, and mixed syntaxial varieties). Peripheral, late-stage HREE-enrichment is attributed to: 1) fractionation during early crystallization of LREE selective minerals, such as ancylite, carbocernaite, and Ca-REE fluorocarbonates in the central Bull Hill dike swarm, 2) REE liberated during breakdown of primary calcite and apatite with higher HREE/LREE ratios, and 3) differential transport of REE in fluids with higher PO43−/CO32− and F−/CO32− ratios, leading to phosphate and pseudomorphic fluorocarbonate mineralization. Supergene weathering processes were important at the stratigraphically highest peripheral REE occurrence, which consists of fine, acicular monazite, jarosite, rutile/pseudorutile, barite, and plumbopyrochlore, an assemblage mineralogically similar to carbonatite laterites in tropical regions.  相似文献   

18.
The Dalucao deposit in western Sichuan Province, southwest China, is one of the largest and most extensive rare earth element (REE) deposits in the Himalayan Mianning–Dechang REE Belt. Moreover, this is the only deposit identified in the southern part of the belt. The deposit contains the No. 1, 2, and 3 orebodies. The No. 1 and 3 orebodies are hosted in two breccia pipes within syenite–carbonatite rocks that intrude a Proterozoic quartz–diorite pluton. Both breccia pipes have elliptical horizontal cross-sections at the surface, being 200–400 m long, 180–200 m wide, and extending to > 450 m depth. The No. 1 and No. 3 orebodies have total thicknesses of 55–175 m and 14–58 m, respectively. REE mineralization is associated with four brecciation events that are recorded in both pipes. The ore grades in the No. 1 and 3 orebodies are similar, with the rocks containing 1.0–4.5% rare earth oxides (REOs). The No. 1 orebody is characterized by a mineral assemblage comprising fluorite + barite + celestite + bastnäsite (i.e., Type I), whereas the No. 3 orebody is characterized by an assemblage comprising fluorite + celestite + pyrite + muscovite + bastnäsite + strontianite (i.e., Type II). Significant amounts of weathered high-grade REE ore (up to 60 wt.% of the rock mass) is mainly present in the No. 1 orebody. This is the main ore-type targeted for exploration within the Dalucao deposit, but is rarely present in other deposits in the Mianning–Dechang REE Belt.Faulting and cryptoexplosive breccia events, possibly linked to movement on the Panxi Fault, were more common in the No. 1 orebody than in the No. 3 orebody. This facilitated the introduction of ore-forming hydrothermal fluids and provided space for the precipitation of REE minerals. Based on the present results, we infer that the Dalucao deposit was the product of multiple stages of ore formation. REE minerals formed in envelopes around, or fractures within, quartz, fluorite, calcite, barite, and celestite in the brecciated ores. The main REE minerals were deposited from hydrothermal fluids within cryptoexplosive breccia, followed by weathering that increased the ore grade. Petrographic studies and X-ray powder diffraction (XRD) analyses indicate that the weathered ore contains 5–60% REE minerals (including bastnäsite, parisite, and monazite), together with gangue (quartz, barite, celestite, and fluorite), large amount of clay minerals (smectite, illite, kaolinite, and sepiolite), and relict igneous minerals (quartz, albite, and K-feldspar). The weathered samples are strongly enriched in La (up to 92,390 ppm), Ce (up to 103,500 ppm), Pr (up to 8006 ppm), and Nd (up to 16,690 ppm) compared with the unweathered brecciated ores. Conversely, Sr concentrations are significantly more enriched in the brecciated ores (up to 256,500 ppm) than in the weathered ores (generally less than 2671 ppm with one exception of 37,850 ppm) due to less celestite. Calcite is largely absent from the weathered ores (except one sample with up to 30% mode), which contrasts with the brecciated ores that contain up to 75% calcite. The effects of weathering, oxidation, loss of ions, and hydration on the brecciated ores led to the refertilization of the REEs and an increase in the grade of the ore deposit.  相似文献   

19.
Phosphorites in Egypt occur in the Eastern Desert, the Nile Valley and the Western Desert at Abu Tartur area and present in Duwi Formation as a part of the Middle Eastern to North African phosphogenic province of Late Cretaceous to Paleogene age (Campanian–Maastrichtian). The Maghrabi-Liffiya phosphorite sector is considered as the most important phosphorite deposits in the Abu Tartur area due to its large reserve thickness and high-grade of lower phosphorite bed beside high content of REE. Back scattered electron (BSE) images show framboidal pyrite filling the pores of the phosphatic grains, suggesting diagenetic reducing conditions during phosphorites formation.Electron Probe Micro Analyzer (EPMA) chemical mapping was conducted to examine the variation and distributions of selected elements (P, F, La, Fe, Yb, Si, Ce, W, Eu, S, Ca, Y and Er) within the shark teeth, coprolites and bone fragments. In the teeth W, S, Fe are concentrated along the axis of the teeth, the bone fragments show high concentration of W, Yb, Er and Eu, whereas coprolites are nearly homogenous in composition contains S, Er with some Si as micro-inclusions. Fluorapatite is considered as main phosphate mineral whereas pyrite occurs as pore-filling within the phosphatic grains and cement materials. Maghrabi-Liffiya samples show a wide range in the P2O5 content, between 19.8 wt.% and 29.8 wt.% with an average of 24.6 wt.% and shows low U content ranging from 15 ppm to 34 ppm with an average of 22 ppm. The total REE content in nine samples representing the Maghrabi-Liffiya ranges from 519 to 1139 ppm with an average of about 879 ppm. The calculation of LREE (La–Gd) show indeed a marked enrichment relative to the HREE (Tb–Lu) where LREE/HREE ratio attains 8.4 indicating a strong fractionation between the LREE and HREE. Chondrite-normalized REE patterns of the studied phosphorite samples show a negative Eu anomaly.  相似文献   

20.
The Miao'ershan uranium ore district is one of the most important granite-hosted uranium producers in South China. There are several Triassic granite plutons in the Miao'ershan batholith, but uranium ore deposits mainly occur within the Douzhashan granitic body. Precise zircon U–Pb dating indicated that these Triassic granite plutons were emplaced during 204 to 215 Ma. The Douzhashan U-bearing granite lies in the central part of the Miao'ershan batholith, and has higher U contents (8.0 to 26.1 ppm, average 17.0 ppm) than the nearby Xiangcaoping granite (5.0 to 9.3 ppm, average 7.0 ppm) and the Yangqiaoling granite (6.4 to 18.3 ppm, average 11.5 ppm) in the south part of the batholith. The Douzhashan granite is composed of medium-grained two-mica granite, whereas the Xiangcaoping and Yangqiaoling granites are composed of porphyritic biotite granite. Both the Xiangcaoping and Douzhashan granites have high A/CNK ratios (> 1.10), high (87Sr/86Sr)i ratios (> 0.720) and low εNd(t) values (− 11.3 to − 10.4), suggesting that they belong to strongly peraluminous S-type granites. The Douzhashan granite has low CaO/Na2O ratios, high Rb/Sr and Rb/Ba ratios, indicating a partial melting origin of clay-rich pelitic rocks. In contrast, the Xiangcaoping granite formed from clay-poor psammite-derived melt. The Yangqiaoling granite shows different geochemical characteristics with the Douzhashan and Xiangcaoping granites, indicating a different magma source. The Yangqiaoling granite has higher εNd(t) of − 9.4 to − 8.3 and variable A/CNK values from 0.98 to 1.19, suggesting a mixture source of meta-sedimentary rocks and meta-igneous rocks. Crystallization fractionation is not the main mechanism for U enrichment in the Douzhashan granite. We suggest that U-rich pelitic rock sources may be the key factor to generate peraluminous U-bearing granites in South China. Searching for those granites which are reduced, strongly peraluminous and were derived from U-rich pelitic rocks, is the most effective way for exploring granite-hosted U deposits.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号