共查询到20条相似文献，搜索用时 15 毫秒
1.
A stability analysis of a laterally confined slope model, lying on an inclined bedding plane, was presented to evaluate the lateral shear resistance by considering the loading paths and failure envelopes. Two slope models were prepared on a bedding plane by compaction, one with and one without lateral confinement. The compacted models are related to the geological conditions at shallow depths where brittle deformation can occur and an excavation can induce horizontal field stress that significantly influences the stability of the slope. Three distinct loading paths, controlled by either tilting the angles or increasing the surcharge loads, were applied to achieve the failure of the slope models. Rankine’s passive earth pressure due to compaction was reduced by the shear strength reduction ratio. The shear strength reduction ratio was estimated through the least-squares fitting method based on the results of model tests at failure when the loading paths intersected the failure envelope. Provided that the effect of lateral confinement in a rock mass can be described by the shear strength reduction ratio, the proposed equations will be beneficial for slope stability analyses of laterally confined slopes on bedding planes. A case study of an undercut pit wall in an open-pit mine was demonstrated by showing that the unknown shear strength reduction ratio can be back-analyzed from the rainfall-induced landslide case. Therefore, the design of other undercut slopes with different geometries and groundwater conditions in the rock mass, which have undergone the same geological process as the back-analyzed case, is possible. 相似文献
2.
The behavior of retaining walls in geosynthetic reinforced soil is complex and requires studies and research to understand the mechanisms of rupture, the behavior of the reinforcements in the soil and the behavior of the main elements of the system: reinforcement-wall-soil. Several researches have been done on the use of geosynthetics as backfill massive reinforcement material (experimental studies, numerical analysis, reduced models …). This parametric study was conducted to investigate the influence of modular blocks type on the behavior of reinforced soil segmental walls. A 3.6 m high wall is composed of modular blocks of earth sand reinforced with four geogrid layers was modeled. The properties of materials, the wall geometry, and the boundary conditions will be explained later. The finite difference computer program FLAC3D was used in this study. The results of this numerical study allowed deducing the importance of this parameter. The type of modular blocks has significant effect to decrease the values of lateral displacements of the wall and decreased tensile stress values in the layers of geogrid. 相似文献
3.
A micromechanics-based approach is proposed to predict the shear failure of brittle rocks under compression. Formulation of this approach is based on an improved wing microcrack model, the Mohr-Coulomb failure criterion, and a micro-macro damage model. The improved wing microcrack model considers the effects of crack inclination angle on mechanical behaviors of rocks. The micro-macro damage model describes the relation between crack growth and axial strain. Furthermore, comparing experimental and theoretical relations between crack initiation stress and confining pressure, model parameters (i.e., μ, a, β, and φ) hardly measured by test are solved. Effects of crack inclination angle, crack size, and friction coefficient on stress-strain relation, compressive strength, internal friction angle, cohesion, shear failure plane angle, and shear strength are discussed in details. A most disadvantaged crack angle is found, which is corresponding to the smallest compressive strength, cohesion, internal friction angle, and shear strength of rocks. Rationality of the theoretical results is verified by the published experimental results. This approach provides a theoretical prediction for effects of microcrack geometry on macroscopic shear properties in brittle rocks under compression. 相似文献
4.
Lade’s single hardening soil model with Cosserat rotation embodied in the finite element method is employed to investigate
the behavior of geosynthetic reinforced soils with special attention to the development of shear banding. The ability of the
finite element model to detect shear banding in a reinforced soil is examined against three high quality small-scale laboratory
plane strain tests on Toyoura sand with and without reinforcement. These three tests were chosen because of the clear failure
surfaces that developed in the soil during loading. The FEM analyses were able to reasonably simulate the plane strain laboratory
tests including both unreinforced and reinforced cases. The FEM analyses gave reasonably good agreement with the experimental
results in terms of global stress–strain relationships and shear band occurrences. Furthermore, and based on FE analyses of
a hypothetical geosynthetic reinforced soil (GRS) retaining wall, it is shown that the geosynthetic reinforcements are very
effective in hindering the formation of shear bands in GRS retaining walls when small spacing between the reinforcement layers
was used. When used properly, the geosynthetic reinforcements made the soil behave as a truly reinforced mass of considerable
stiffness and strength. 相似文献
5.
A series of benched excavations were typically carried out on the bedrock slope surface to improve the stability of the soil–rock mixture (S–RM) fill slope. It is difficult to devise an in situ, large-scale direct shear test for the interphase between the S–RM fill and the benched bedrock slope surface. This study introduced a comprehensive approach to investigate the shear deformation and strength of the interphase. First the soil–rock distribution characteristics were analyzed by test pitting, image analysis, and sieve test. Then the PFC2D random structure models with different rock block size distributions were built, and large-scale numerical shear tests for the interphase were performed after calibrating model parameters through laboratory tests. The stress evolution, damage evolution and failure, deformation localization (based on a principle proposed in this paper), rotation of rock blocks, and shear strength were systematically investigated. It was found that as the rock block proportion and rock block size (rock block proportion of 50 %) increase, the fluctuations of the post-peak shear stress–displacement curves of the interphase become more obvious, and the shear band/localized failure path network becomes wider. Generally, smaller rock blocks are of greater rotation angles in the shear band. The peak shear stress and internal friction angle of the interphase increase, while the cohesion decreases with growth of the rock block proportion. However, all these three parameters increase as the rock block size (rock block proportion of 50 %) increases. 相似文献
6.
结合岩石节理面非线性Barton-Bandis破坏准则,探讨了将Barton-Bandis破坏准则参数转化为线性Mohr-Coulomb破坏准则抗剪强度参数的两种常用方法,通过实例分析了各方法的优劣。推导了加锚单岩石节理面控制的平面滑动岩体边坡抗滑稳定性安全系数计算式,开展了锚固参数分析。研究表明：相对于采用等效线性拟合法或切线等效法获取Mohr-Coulomb抗剪强度参数而言,直接应用Barton-Bandis破坏准则计算节理面控制的岩石边坡稳定性更为直观和简便;随着结构面基本摩擦角、结构面粗糙度系数和结构面壁面有效抗压强度的增大,边坡安全系数逐步提高,且结构面基本摩擦角和粗糙度系数对边坡安全系数的影响程度更为显著;锚索锚固力越大,边坡抗滑稳定性越好,而锚索设置角度越大,边坡抗滑稳定性越低,锚索角度设置不当将明显减小锚固效应的有效性。 相似文献
7.
有限填土加筋土挡墙是短加筋土挡墙的一种特殊情况,其工作性状还没有被清晰地认识。文章在离心模型试验成果的基础上,采用FLAC软件建立有限填土加筋土挡墙的二维数值模型,讨论了加筋间距、加筋长度以及墙面与竖直平面的夹角对挡墙稳定性和破坏模式的影响。结果表明:（1）墙后有限填土情况下主动土压力约为库伦主动土压力的1/2~1/3;（2）在稳定地基工况下,挡墙均为复合破坏模式,滑动面呈折线型,在挡墙中下部,滑动面同时穿过了加筋区和填土区,从墙趾处滑出;在挡墙上部,滑动面基本沿着填土与稳定墙面的接触面向上发展;（3）潜在滑动面是自下向上逐渐形成的,体现为下部剪切、上部拉张的特征;（4）在墙后有限填土情况下,加筋长度减小到0.4H时,挡墙仍能保持稳定,加筋间距在控制挡墙稳定性方面具有重要作用。 相似文献
8.
大型三轴固结排水剪切试验表明：土工带加筋后土体的破坏强度和破坏应变均得到提高。从加筋土和未加筋土的强度包线看出,加筋前后土体的强度曲线基本平行,摩擦角相等,粘聚力提高。通过分析加筋土的应力-应变关系试验曲线,研究土工带加筋素碎石土的抗剪强度特性,提出土工带加筋土的抗剪强度表达式。为进一步研究土工带素碎石土加筋机理提供试验基础。 相似文献
9.
The load transfer capacity and failure mechanism of a fully grouted bolt installed across a joint in shear is investigated,
both experimentally and numerically, in five types of bolt. The double-shearing testing of bolts were studied in concrete
blocks of 20, 40 and 100 MPa strengths, subjected to different pretension loads of 0, 5, 10, 20, 50 and 80 KN, respectively.
The parameters examined include: shear resistance, shear displacement, induced strains and stresses during the bolt-bending
process, and its ultimate failure across the sheared joint planes. The conclusions drawn from the study were that the strength
of the concrete, bolt profile configuration and bolt pretension load played a significant influence on the shear resistance,
shear displacement and failure mechanism of the reinforced medium. Experimental and numerical simulations showed that the
failure occurs as a result of the induced axial and shear stresses acting between the hinge point distances in the vicinity
of the shear joint plane. 相似文献
10.
The design of earthquake-resistant structures depends greatly on the soil–foundation–structure interaction. This interaction is more complex in the presence of liquefiable soils. Pile and rigid inclusion systems represent a useful practice to support structures in the presence of liquefiable soils in seismic zones. Both systems increase the bearing capacity of soil and allow reducing the settlements in the structure. Numerical models with a 3-storey reinforced concrete frame founded on inclusions systems (soil–inclusion–platform–structure) and pile systems (soil–pile–structure) were analyzed. Finite difference numerical models were developed using Flac 3D. Two different soil profiles were considered. A simple constitutive model for liquefaction analysis that relates the volumetric strain increment to the cyclic shear strain amplitude was utilized to represent the behavior of the sand, and the linear elastic perfectly plastic constitutive model with a Mohr–Coulomb failure criterion was used to represent the behavior of the earth platform. Two earthquakes were used to study the influence of the different frequency of excitation in the systems. The results were presented in terms of maximum shear forces distribution in the superstructure and spectrum response of each system. The efforts and displacements in the rigid elements (piles or rigid inclusions) were compared for the different systems. The bending and buckling failure modes of the pile were examined. The results show that the pile system, the soil profile and the frequency of excitation have a great influence on the magnitude and location of efforts and displacements in the rigid elements.
相似文献
11.
In this paper, the stability of an ancient landslide during the first impounding of a nearby reservoir is investigated through the analyses of the shear strength reduction behavior of slip zone soil. In view of the experimental observations, an empirical strain-dependent soil model is established and is then incorporated in finite element analyses. The numerical analysis results show that the failing sections progressively develop due to the soil strength declines from peak toward residual, and the shear zone propagates within the front slope. It is demonstrated in the numerical results that the toe weighting measure has a significant effect on restraining the shear displacements of the soils and preventing the progressive failure of the landslide. The field observations further confirmed the stability condition of the reinforced landslide. 相似文献
12.
土洞是覆盖型岩溶区一种隐伏的不良地质现象。土洞在水的作用下发育演化最终形成塌陷,可通过地下水位的变化来研究土洞发育和塌陷的形成。同时土洞的演化会造成覆盖土体不均匀位移和应力重分布,可通过覆盖土体位移和应力变化来进行研究土洞演化过程。采用FLAC3D三维有限差分程序,分析覆盖层垂向位移场表明:最大垂向位移出现在土洞顶部,使拱顶出现拉张破坏,并可根据洞顶土层位移的数值模拟结果,划分“等沉面”确定土洞扰动的土层深度。分析覆盖层剪切应力场表明:在土洞拱趾部位出现剪应力集中,会造成拱趾的剪切破坏,并可根据洞顶“剪应力低值区”,判断覆盖层中土拱效应的存在。分析覆盖层塑性区表明:较为坚硬的黏土层中,土洞以拱顶塌落和拉张破坏为主,最终可以形成坑壁较为陡直的桶状或坛状塌坑。土层较为松散时,以拱趾的剪切破坏为主,最终可以形成锥碟形塌陷坑。利用“剪应力低值区”,“等沉面”和“塑性区”可综合判断土洞的稳定性以及覆盖层所能形成的极限土洞大小。岩溶土洞演化规律及数值模拟研究对岩溶塌陷（土洞）早期监测和评价有着重要的理论及工程意义。 相似文献
13.
筋-土界面强度参数是加筋结构设计和稳定分析的关键技术指标。拉拔试验能较好模拟现场加筋行为而得到广泛的应用。基于拉拔和直剪试验研究了拉拔（剪切）速率对筋-土界面特性和吹填砂强度特性的影响规律及机制,同时探讨了不同填料界面、筋材类型的加筋效果。结果表明：随着拉拔（剪切）速率的增大,吹填砂-筋材-吹填砂界面的抗剪强度下降明显,而软土-筋材-吹填砂界面以及砂本身强度则变化不大。从强度指标来看,拉拔速率增大,筋-砂界面强度的降低主要表现为似黏聚力的降低,筋-软土界面抗剪强度的增加表现为内摩擦角增大,剪切速率对吹填砂则基本无影响。筋-土界面特性受拉拔速率和正应力的共同影响,与筋材类型和填料特性有关。筋-土界面内摩擦角小于填料摩擦角,但在一定正应力下低速剪切时（如<0.53 mm/min）可获得高于填料的抗剪强度。宜根据似黏聚力大小合理选择摩擦参数进行加筋结构的设计与评价。 相似文献
14.
应用离心模型试验对工程中被颇为关注的带有与边坡走向一致的倾斜基岩面,且在该基岩面存在软弱夹层的边坡的稳定性和破坏模式进行了比较详细地研究,并用极限平衡分析方法对试验结果进行了计算分析。模型试验结果表明,该类边坡失稳时,紧贴岩面的软弱夹层就成为滑动破坏面,因而边坡整体沿基岩面向下滑动,且侧向水平位移各处基本一致,表现出典型的平移滑动破坏模式。将稳定安全系数的实测结果与按平移滑动破坏模式的极限平衡分析方法的计算结果相比较后发现,两者相当地吻合,证实了按平移滑动破坏模式所作的极限平衡分析,能良好地预测边坡平移滑动破坏情形下的稳定安全系数。 相似文献
15.
Soil shearing resistance is very important while designing various structures which have direct contact with soil, for example, sheet piles, piles, retaining walls, reinforced earth structures and shallow foundations. Even though designers use empirical values for their design, it is very important to obtain more accurate values for soil–solid materials shearing resistance. In this work, laboratory tests have been carried out to investigate the effect of roughness interface and texture models on friction angle between cohesive soils and steel, as well as abrasive paper material, using direct shear tests. All tests were carried out under consolidated drained shear conditions. The behavior at the soils–solid interface was found to vary according to surface roughness. It also seems that the type of material (steel or paper of abrasive) used does not have a major influence on the shear strength. As far as roughness is concerned, friction behavior is likely to be generally classified into three failure modes, namely full sliding at the interface, shear failure within the soil, and a mixed behavior where interface sliding and shear deformation of the soil specimen proceed simultaneously. However, for the second mode, the shear strength at the interface soil-rough solid materials steel was found to be lower than the shear strength of the soil, for a soil that is classified as high plasticity clay. Furthermore, it was found that the interfacial shear strength is independent of the texture surface for a given roughness. 相似文献
16.
The effect of joint overlap on the full failure behavior of a rock bridge in the shear-box test was numerically investigated by means of the particle flow code in two dimensions (PFC2D). Initially, the PFC2D was calibrated by use of data obtained from experimental laboratory tests to ensure the conformity of the simulated numerical model’s response. Furthermore, validation of the simulated models was cross-checked with the results from direct shear tests performed on non-persistent jointed physical models. By use of numerical direct shear tests, the failure process was visually observed and the failure patterns were seen to be in reasonable accordance with experimental results. Discrete element simulations demonstrated that macro shear fractures in rock bridges are because of microscopic tensile breakage of a large number of bonded discs. The failure pattern is mostly affected by joint overlap whereas the shear strength is closely related to the failure pattern. The results show that non-overlapping joints lost their loading capacity when nearly 50 % of total cracks developed within the rock bridge whereas the overlapping joints lost their loading capacity as soon as cracks initiated from the joint walls. Furthermore, progressive failure or stable crack growth was seen to develop for non-overlapped joints whereas brittle failure or unstable crack growth was seen to develop in overlapped joints. 相似文献
17.
为了研究板裂千枚岩的微观结构及力学性质,以汶川-马尔康高速公路沿线典型的板裂千枚岩为研究对象,进行了X衍射,薄片鉴定和单轴、三轴压缩试验。结果表明：1）板裂千枚岩微观结构和矿物成分比较复杂,具有明显的脆、塑性变形和裂隙,结构稳定性差;2）板裂千枚岩的各向异性明显,结构面夹角从0°到90°,板裂千枚岩的弹性模量、抗压强度、黏聚力和内摩擦角先减小后增大,呈V型分布规律;3）板裂千枚岩的破裂模式与结构面夹角和围压的大小密切相关,其破裂模式共有顺结构面的张拉劈裂破坏、顺结构面的剪切滑移破坏、Y型张拉-剪切复合破坏、顺结构面和贯穿结构面的复合张剪破坏、贯穿结构面的剪切破坏5种类型;4）随着围压的增大,不同结构面夹角试样的强度、变形参数和破裂模式的各向异性逐渐减弱;5）最大主应力与结构面的组合方式控制着岩石的破裂模式和力学性质,这是板裂板裂千枚岩显示各向异性的根本原因。 相似文献
18.
土工格栅与土的界面摩擦特性指标是加筋土工程设计的关键。通过分析土工格栅与土的界面摩擦作用和进行了直剪摩擦试验和拉拔摩擦试验,测试了两种试验条件的界面摩擦特性。在两种试验条件下,土工格栅加筋土复合体的抗剪强度均有界面摩擦角φsq和界面凝聚力csq,且土工格栅与土相对位移量的不同,其复合体的强度机理有区别。在拉拔摩擦试验中,剪应力峰值强度对应的剪切变形值高于直剪摩擦试验中剪应力峰值强度的剪切变形值5～10倍以上。两种试验均有其适用性,而土与土工格栅的相对位移较小时直剪摩擦试验较能反映实际;土与土工格栅相对位移较大时土与格栅双面均发生相对位移,拉拔摩擦试验更为合适。随法向应力的增大,直剪摩擦和拉拔摩擦试验的剪应力峰值以及剪应力峰值对应的位移均提高。直剪摩擦的剪切速度小,剪应力峰值强度高,且达到峰值强度的剪切位移大;增加剪切速度,剪应力峰值强度降低,且对应的位移也减少,其原因是界面上的孔隙水压力消散和筋材的应力松弛。应根据具体工程的需要选择直剪摩擦试验和拉拔摩擦试验确定设计参数。 相似文献
19.
Fracturing processes of rock are simulated using a micro- and fracture mechanical-based numerical modeling approach. The numerical model considers material heterogeneity and initial microcrack distributions. The gradual formation of macroscopic fractures by coalesced microcracks is successfully reproduced. Distinct failure modes are observed in the model under different loadings. Agreement is shown between the numerical results and laboratory observations. The influence of microcrack orientations on the fracture patterns is quantified by the numerical models. Possible mechanisms describing the splitting failure of hard brittle rocks under uniaxial compression are proposed and discussed.
相似文献
20.
土工合成材料在各类加筋土工程中运用时,面临的问题主要是加筋体结构的稳定性、安全性及长期服役性能,而筋土界面摩擦特性对加筋体结构的稳定性与安全性有着直接的影响。目前对黏土和砂土的研究居多,针对现场常见的碎石土混合料与格栅界面相互作用的研究却鲜有报道。本文以兰州至海口高速公路广西南宁经钦州至防城港段改扩建工程项目为背景,通... 相似文献
|
