首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
We report the presence of scapolite marbles in the Biscay Synclinorium of the Basque–Cantabrian basin, the link between the mainland Pyrenees and the North Iberian palaeomargin. From their microstructures and mineral assemblages these marbles are correlated with similar marbles formed during the Cretaceous metamorphism representative of the North Pyrenean Zone. Their setting in an area with northward-verging structures leads us to propose a new location of the North Pyrenean Fault through the Basque–Cantabrian basin. Available geophysical information, gravity and magnetic anomalies, is better explained with this new proposal, which elucidates a major outstanding matter of Pyrenean geology.  相似文献   

2.
We constructed a geological map, a 3D model and cross-sections, carried out a structural analysis, determined the stress fields and tectonic transport vectors, restored a cross section and performed a subsidence analysis to unravel the kinematic evolution of the NE emerged portion of the Asturian Basin (NW Iberian Peninsula), where Jurassic rocks crop out. The major folds run NW-SE, normal faults exhibit three dominant orientations: NW-SE, NE-SW and E-W, and thrusts display E-W strikes. After Upper Triassic-Lower Jurassic thermal subsidence, Middle Jurassic doming occurred, accompanied by normal faulting, high heat flow and basin uplift, followed by Upper Jurassic high-rate basin subsidence. Another extensional event, possibly during Late Jurassic-Early Cretaceous, caused an increment in the normal faults displacement. A contractional event, probably of Cenozoic age, led to selective and irregularly distributed buttressing and fault reactivation as reverse or strike-slip faults, and folding and/or offset of some previous faults by new generation folds and thrusts. The Middle Jurassic event could be a precursor of the Bay of Biscay and North Atlantic opening that occurred from Late Jurassic to Early Cretaceous, whereas the Cenozoic event would be responsible for the Pyrenean and Cantabrian ranges and the partial closure of the Bay of Biscay.  相似文献   

3.
The Variscan Belt in western Europe shows an arcuate geometry that is usually named Ibero-Armorican Arc. The nucleus of this arc, known as the Asturian Arc, comprises the Cantabrian Zone which is a foreland fold and thrust belt. The Trubia River area is located in the inflexion zone of the Asturian Arc, which is a strategic structural position for unraveling the geometry and kinematics of the Variscan thrust sheets and related folds. Geological mapping, construction of stratigraphic and structural cross sections, analysis of kinematic indicators, and estimate of shortening for each cross section have been carried out. This area consists of two major antiform-synform pairs related to two imbricate thrust systems. These folds are asymmetric, tight, and their axial traces follow the trend of the Asturian Arc. They have been interpreted as fault-propagation folds. The emplacement directions measured in the Trubia River area change from north to south and converge towards the core of the Asturian Arc. The minimum shortening estimated ranges between 16.4 and 17.6 km, which corresponds to 56.9 and 59.4%. The complex cross-cutting relationships between folds and thrusts suggest that, in general, the different structural units followed a forward-breaking sequence of emplacement, with some breaching and a few out-of-sequence thrusts. The analysis of the transport vectors together with the disposition of the fold axes and post-thrusting faults that deform the thrust stack are evidence of a late deformation event that is partially or totally responsible for the arcuate form of the Asturian Arc. The timing of the Asturian Arc, amount of shortening, and sequence of emplacement of the structures are in accordance with previous regional studies of the Cantabrian Zone.  相似文献   

4.
Nyankanga is the largest gold deposit in the Geita Greenstone Belt of the northern Tanzania Craton. The deposit is hosted within an Archean volcano-sedimentary package dominated by ironstones and intruded by a large diorite complex, the Nyankanga Intrusive Complex. The supracrustal package is now included within the intrusive complex as roof pendants. The ironstone fragments contain evidence of multiple folding events that occurred prior to intrusion. The supracrustal package and Nyankanga Intrusive Complex are cut by a series of NE–SW trending, moderately NW dipping fault zones with a dominant reverse component of movement but showing multiple reactivation events with both oblique and normal movement components. The deposit is cut by a series of NW trending strike slip faults and ~ E–W trending late normal faults. The Nyankanga Fault Zone is a major NW dipping deformation zone developed mainly along the ironstone–diorite contacts that is mineralised over its entire length. The gold mineralization is hosted within the damage zone associated with Nyankanga Fault Zone by both diorite and ironstone with higher grades typically occurring in ironstone. Ore shoots dip more steeply than the Nyankanga Fault Zone. The mineralization is associated with sulfidation fronts and replacement textures in ironstones and is mostly contained as disseminated sulphides in diorite. The close spatial relationship between gold mineralization and the ironstone/diorite contact suggests that the reaction between the mineralising fluid and iron rich lithotypes played an important role in precipitating gold. Intense brecciation and veining, mainly in the footwall of Nyankanga Fault Zone, indicates that the fault zone increased permeability and allowed the access of mineralising fluids. The steeper dip of the ore shoots is consistent with mineralization during normal reactivation of the Nyankanga Fault Zone.  相似文献   

5.
Porphyry Cu (Mo–Au) deposits in the Himalayan–Tibetan orogen formed during the Late Triassic, Early Cretaceous, Eocene, Oligocene, and Miocene and can be classified into different metallogenic belts according to their petrologic features, mineralization ages, and tectonic settings. A close spatial relationship to regional strike–slip faults is evident in all five belts. Porphyry Cu (Mo–Au) deposits exist in a wide range of tectonic environments, including island arc, syn-collision, post-collisional convergence, and continental-transform plate boundaries.

Porphyry Cu deposits cluster in the southernmost part of the Yidun–Zhongdian Belt, along the N–S-trending Gaze River dextral strike–slip fault. Porphyry Cu deposits in the Lijiang–Jinping Belt lie along the Ailaoshan–Red River continental–transform shear zone and the associated strike–slip faults. The Yulong–Malasongduo porphyry belt is controlled by the Cesuo Fault, a NNW-trending regional dextral transcurrent fault that is associated with Palaeogene westward continental oblique subduction along the Jinsha suture. In the Gangdis Belt, Miocene porphyry Cu deposits are localized along N–S-trending normal faults, which were produced by transpression within the regional NW–SE-trending Karakoram–Jiali fault zone (KJFZ). A close spatial relationship between porphyry Cu deposits and strike–slip faults also exists for the Bangong–Nujiang Belt.  相似文献   

6.
The Esla tectonic unit lies along the southern boundary of the Cantabrian–Asturian Arc, a highly curved foreland fold-thrust belt that was deformed during the final amalgamation of the Pangea supercontinent. Previous structural and paleomagnetic analyses of the Cantabrian–Asturian Arc suggest a two-stage tectonic history in which an originally linear belt was bent into its present configuration, creating an orocline. The Esla tectonic unit is a particularly complex region due to the interaction of rotating thrust sheets from the southern limb of the arc and the southward-directed thrusts of the Picos de Europa tectonic domain during late-stage north–south shortening and oroclinal bending. These structural interactions resulted in intense modification of early-phase thin-skinned tectonic structures that were previously affected by a deeper out-of-sequence antiformal stack that passively deformed the early thrust stack. A total of 75 paleomagnetic sites were collected from the Portilla and Santa Lucia formations, two carbonate passive-margin reef platform units from the middle Devonian. Similar to other regions of the Cantabrian–Asturian Arc, Esla Unit samples carry a secondary remanent magnetization that was acquired after initial thrusting and folding of Variscan deformation in the late Carboniferous. Protracted deformation during late-stage oroclinal bending caused reactivation of existing thrust sheets that include the Esla and younger Corniero and Valbuena thrusts. When combined with existing structural data and interpretations, these data indicate that the present-day sinuosity of the Esla Unit is the consequence of both secondary rotation of originally linear features in the western Esla exposures (e.g., frontal thrusts), and secondary modification and tightening of originally curvilinear features in the eastern Esla exposures (e.g., hanging-wall lateral/oblique ramps). Differences in structural style between the Esla and other tectonic units of the arc highlight the complex kinematics of oroclinal bending, which at the orogen-scale buckled an originally linear, north–south (in present-day coordinates) trending Cantabrian–Asturian thrust belt during the final stages of Pangea amalgamation.  相似文献   

7.
The Main Recent Fault of the Zagros Orogen is an active major dextral strike-slip fault along the Zagros collision zone, generated by oblique continent–continent collision of the Arabian plate with Iranian micro-continent. Two different fault styles are observed along the Piranshahr fault segment of the Main Recent Fault in NW Iran. The first style is a SW-dipping oblique reverse fault with dextral strike-slip displacement and the second style consists of cross-cutting NE-dipping, oblique normal fault dipping to the NE with the same dextral strike-slip displacement. A fault propagation anticline is generated SW of the oblique reverse fault. An active pull-apart basin has been produced to the NE of the Piranshahr oblique normal fault and is associated with other sub-parallel NE-dipping normal faults cutting the reverse oblique fault. Another cross-cutting set of NE–SW trending normal faults are also exist in the pull-apart area. We conclude that the NE verging major dextral oblique reverse fault initiated as a SW verging thrust system due to dextral transpression tectonic of the Zagros collision zone and later it has been overprinted by the NE-dipping oblique normal fault producing dextral strike-slip displacement reflecting progressive change of transpression into transtension in the collision zone. The active Piranshahr pull-apart basin has been generated due to a releasing damage zone along the NW segment of the Main Recent Fault in this area at an overlap of Piranshahr oblique normal fault segment of the Main Recent Fault and the Serow fault, the continuation of the Main Recent Fault to the N.  相似文献   

8.
The study area is located between Çorum and Amasya along the Ezinepazar?–Sungurlu Fault Zone (ESFZ) which is regarded as the splay of the North Anatolian Fault Zone (NAFZ). By this study, the 1/25,000 scaled geological map of the study area was prepared, and its stratigraphic and tectonic characteristics were unraveled as a result of palaeontological and petrographical analyses of the samples collected from different rock units. Particularly, geologic ages of the Late Jurassic–Early Cretaceous Ferhatkaya and Carcurum and Middle Eocene Çekerek formations were provided from palaeontological determinations. Using Landsat TM and Shuttle Radar Topography Mission 3 (SRTM 3) data of the region, the borders between the rock units and the tectonic characteristics in the study area were clarified by spectral and spatial enhancement methods. Kinematic characteristics of ESFZ obtained from the young sedimentary rocks along both sides of the fault zone were also inferred in this study. Understanding the kinematic and geometrical characteristics of the faults is important in terms of the seismotectonics of the region. In the statistical study conducted on the basis of the directions of the lineaments indicates the highest concentrations in general between N 50° - 60° E and N 60° - 70° E. Band 7 of the study area was enlightened in SE direction taking into consideration the relation of the geologic structures in the region with NAFZ and ESFZ and their general strike directions. Along with the formation of NAFZ, the region has undergone a counterclockwise rotation of approximately 20°–30°, which has developed between the “splay” faults in the south block of that fault. These faults are strike-slip faults formed under the compressional regime roughly in a NW–SE direction. It is noted that this tectonic regime has developed under compression in NW–SE direction, which was dominant in similar kinematic analysis studies conducted on NAFZ.  相似文献   

9.
The research on Paleozoic tectonics and endogenic metallogeny in the Tianshan-Altay region of Central Asia is an important and significant project. The Altay region, as a collision zone of the Early Paleozoic(500–397 Ma), and the Tianshan region, as a collision zone of the early period in the Late Paleozoic(Late Devonian-Early Carboniferous, 385–323 Ma), are all the result of nearly N-S trending shortening and collision(according to recent magnetic orientation). In the Late Devonian-Early Carboniferous period(385–323 Ma), regional NW trending faults displayed features of dextral strike-slip motion in the Altay and Junggar regions. In the Tianshan region, nearly EW-trending regional faults are motions of the thrusts. However, in the Late Carboniferous-Early Permian period(323–260 Ma), influenced by the long-distance effect induced from the Ural collision zone, those areas suffered weaker eastward compression, the existing NW trending faults converted into sinistral strike-slip in the Altay and Junggar regions, and the existing nearly E-W trending faults transferred into dextral strike-slip faults in the Tianshan region. The Rocks of those regions in the Late Carboniferous-Early Permian period(323–260 Ma) were moderately ruptured to a certain tension-shear, and thus formed a number of world famous giant endogenic metal ore deposits in the Tianshan-Altay region. As to the Central Asian continent, the most powerful collision period may not coincide with the most favorable endogenic metallogenic period. It should be treated to "the orogenic metallogeny hypothesis" with caution in that region.  相似文献   

10.
琼东南盆地西部环崖南凹陷的油气勘探亟需寻找接替领域。针对勘探研究中存在的3个地质问题,利用丰富的钻井和地震资料对红河断裂活动特征及其对环崖南凹陷构造-沉积-成藏的影响开展深入分析。认为红河断裂的走滑活动通过F1断层向琼东南盆地西部传递剪切应力,其演化与环崖南凹陷的构造-沉积作用具有良好的时空耦合关系,并控制了环崖南凹陷的油气运移。晚渐新世,红河断裂左行走滑活动,通过F1断层在琼东南盆地西部诱导产生EW向挤压应力和SN向拉张应力,加剧了盆地西部的南北向快速拉张裂陷,形成了崖北凹陷和崖南凹陷两个沉积中心。中中新世—晚中新世,红河断裂处于平静期,受区域右旋张扭应力控制及海南岛物源减少的影响,环崖南凹陷呈现局部隆升,碳酸盐台地发育,梅山组一段及黄流组二段大范围缺失。上新世至今,红河断裂右行走滑活动,通过F1断层在琼东南盆地西部诱导产生SN向挤压应力和EW向拉张应力,对盆地西部的拉张具有约束作用,并造成NEE、NE走向断层受挤压作用而处于封闭状态,NW走向断层受张扭应力作用而处于开启状态。上新世为盆地生排烃高峰期,NW走向断层可有效输导油气,而NEE、NE走向断层的油气输导能力较差,这合理解释了已钻构造的油气发现情况。环崖南凹陷下一步油气勘探应重点围绕NW走向断裂带展开。  相似文献   

11.
The N–S oriented Coastal Cordillera of South Central Chile shows marked lithological contrasts along strike at ∼38°S. Here, the sinistral NW–SE-striking Lanalhue Fault Zone (nomen novum) juxtaposes Permo-Carboniferous magmatic arc granitoids and associated, frontally accreted metasediments (Eastern Series) in the northeast with a Late Carboniferous to Triassic basal-accretionary forearc wedge complex (Western Series) in the southwest. The fault is interpreted as an initially ductile deformation zone with divergent character, located in the eastern flank of the basally growing, upwarping, and exhuming Western Series. It was later transformed and reactivated as a semiductile to brittle sinistral transform fault. Rb–Sr data and fluid inclusion studies of late-stage fault-related mineralizations revealed Early Permian ages between 280 and 270 Ma for fault activity, with subsequent minor erosion. Regionally, crystallization of arc intrusives and related metamorphism occurred between ∼306 and ∼286 Ma, preceded by early increments of convergence-related deformation. Basal Western Series accretion started at >290 Ma and lasted to ∼250 Ma. North of the Lanalhue fault, Late Paleozoic magmatic arc granitoids are nearly 100 km closer to the present day Andean trench than further south. We hypothesize that this marked difference in paleo-forearc width is due to an Early Permian period of subduction erosion north of 38°S, contrasting with ongoing accretion further south, which kinematically triggered the evolution of the Lanalhue Fault Zone. Permo-Triassic margin segmentation was due to differential forearc accretion and denudation characteristics, and is now expressed in contrasting lithologies and metamorphic signatures in todays Andean forearc region north and south of the Lanalhue Fault Zone.  相似文献   

12.
The 2001 Bhuj earthquake (Mw 7.7) occurred in northwestern region of Indian peninsula has reactivated a couple of transverse faults to its surroundings. Intermediate to moderate magnitude earthquakes are occurring along these faults which includes recent Dholavira earthquake (Mw 5.1, 2012) suggesting distinct tectonic scenario in the region. We present the results of magnetotelluric (MT) impedance tensors analyses of 18 sites located along a profile cutting various faults in the uplifted Wagad block of the Kachchh basin. The MT time series of 4–5 days recording duration have been processed and the earth response functions are estimated in broad frequency range (0.01–1000 s). The observed impedance tensors are analyzed by using three decomposition techniques as well as by the phase tensor method constraining with the induction arrows. The analyses suggest distinct tectonic feature within the block bounded by the South Wagad Fault (SWF) and the North Wagad Fault (NWF) particularly in the period band of 1–10 s. In the south of NWF, the telluric vectors and the major axes of the phase ellipses are aligned in the NNW–SSE to NW–SE direction where as a dominant E–W strike is obtained for northern side of the NWF. The transverse geo-electric strike coincides with the prominent clustering of seismicity after the Bhuj earthquake and trend of the Manfara transverse fault is located in close vicinity of the study area. We therefore suggest the presence NNW–SSE trending transverse structural feature in the Wagad uplift of the basin appears to play significant role in the current seismicity of the active intraplate region.  相似文献   

13.
中国西南部红河断裂带的活动演化历史长期以来备受国内外学者的关注,该断裂从陆地向海域延伸进入莺歌海盆地,并对莺歌海盆地的形成和演化起重要的控制作用。目前,红河断裂带经历早期的左旋走滑运动和后期的右旋走滑运动已经得到公认,但对于其精细的构造演化历史及其左旋走滑向右旋走滑运动转换的时间还未能达成共识。本文利用构造控制沉积、沉积反映构造的思想,通过对莺歌海盆地三维地震资料的构造解析,从T27界面上下地层厚度存在"跷跷板"式的变化、沉积中心的迁移、沉积速率的变化、陆架-陆坡坡折带的出现、微小断裂的特征以及底辟构造等方面的研究,确定莺歌海盆地红河断裂带的左旋走滑运动停止于T40(10.5Ma);T40~T30(10.5~5.5Ma)是构造变形的平静期;T30~T27(5.5~2.4 Ma)为左旋走滑运动向右旋走滑运动转换时期;T27(2.4 Ma)以后右旋走滑活动开始,并控制坡折带(包括莺歌海盆地和琼东南盆地)和底辟构造等的形成;T20(1.9 Ma)以来,右旋走滑活动逐渐减弱。  相似文献   

14.
Fissure-ridge travertines (FRTs) are of great importance for the determination and comparison of tectonic deformation in a region. The coeval development of these travertines with active fault zones supplies significant information about regional dynamics in terms of deformation pattern and evolution. In this paper, the characteristics of FRTs of the Ba?kale basin (eastern Turkey) and responsible regional tectonism are discussed for the first time. The Ba?kale basin is located between the Ba?kale Fault Zone (BFZ) characterised by Çaml?k fault and I??kl?–Zirani? fault. It is located between dextral Yüksekova Fault Zone and southern end of dextral Guilato–Siahcheshmeh–Khoy Fault system (Iran). Various morphological features indicating recent activity are exposed along the BFZ, including offsetting rivers, fissure-ridge travertine and fault scarps. The Çaml?k fissure-ridge travertine composing of three different depositions is observed along the eastern edge of the BFZ with approximately parallel orientations. The Çaml?k fissure-ridge travertine has been formed and developed on fault zone related to strike-slip or oblique movements. We explain how kinematic changes of faults can influence the fissure-ridge development.  相似文献   

15.
The Crevillente Fault Zone (CFZ) comprises a system of northeast to southwest oriented dextral faults that extend for some 600 km in the External Zones of the Betic Cordillera (SE Spain). The magnitude of lateral displacement related to this fault zone is not well constrained, and it is considered to be between 20 and 400 km. The stratigraphical and sedimentological criteria used in this work have proven effective in quantifying the magnitude of the displacement along this structure. We have analysed an oolitic turbidite facies in the Middle Jurassic of the Sierra de Ricote (Median Subbetic of Murcia Province). A detailed revision of ooidal limestone outcrops has revealed that the source area of these deposits was to the Internal Subbetic zone, north of Vélez Rubio (Almería Province). These two tectonic units, the Median and Internal Subbetic, are currently 75 km from each other and separated by the CFZ. The conclusions arising from our stratigraphical, petrological and sedimentological studies favour interpretation of a 75–100 km lateral displacement. After restoring the Late Jurassic–Cretaceous anticlockwise rotation of Iberia, the CFZ appears to belong to the E–W palaeofault system that is related to the extension of the South Iberian Continental Margin (SICM). Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

16.
《International Geology Review》2012,54(12):1557-1567
ABSTRACT

The present-day tectonic framework of Turkey comprises mainly two strike-slip fault systems, namely dextral North Anatolian and sinistral East Anatolian faults. They are considered as the main cause of deformation patterns in Anatolia. These two mega shear systems meet at Kargapazar? village of Karl?ova county. The area to the east of the junction has a transpressional tectonic regime between the Eurasian and Arabian plates and is characterized, based on field observation, by a network of faults defining a typical horsetail splay structure. The horsetail splay is interpreted as marking the termination of the North Anatolian Fault System (NAFS), which continues eastward into the Varto Fault Zone (VFZ) and then dies out. The present study reveals that the VFZ is made up of two main parts, namely the principal displacement zone (PDZ) and the transpressional splay zone (TPSZ), both characterized by the right-lateral strike-slip with reverse motion. However, the area to the east of Varto is characterized dominantly by reverse-thrust faults and E–W-trending faults as shown by focal mechanism solutions. The generation of the VFZ as a transpressional termination to the NAFS can be related directly to the block movements of the Eurasian, Anatolian, and Arabian plates.  相似文献   

17.
Ediacaran and Early Cambrian sedimentary rocks from NW Iberia have been investigated for detrital zircon U–Pb ages. A total of 1,161 concordant U–Pb ages were obtained in zircons separated from four Ediacaran samples (3 from the Cantabrian Zone and one from the Central Iberian zone) and two Lower Cambrian samples (one from the Cantabrian Zone and one from the Central Iberian Zone). Major and trace elements including REE and Sm–Nd isotopes were also analyzed on the same set of samples. The stratigraphically older Ediacaran sequence in the Cantabrian Zone has a maximum sedimentation age of ca. 600 Ma based on detrital zircon content and is intruded by ca. 590–580 Ma granitoids constraining the deposition of this part of the sequence between ca. 600 and 580 Ma. The stratigraphically younger Ediacaran sequence in the Cantabrian Zone has a maximum sedimentation age of ca. 553 Ma. The Ediacaran sample from the Central Iberian Zone has an identical within error maximum sedimentation age of ca. 555 Ma. The detrital zircon U–Pb age patterns are very similar in all the Ediacaran samples from both zones including the main age groups ca. 0.55–0.75 Ga, ca. 0.85–1.15 Ga and minor Paleoproterozoic (ca. 1.9–2.1 Ga) and Archean (ca. 2.4–2.6 Ga) populations. Kolmogorov–Smirnov statistical tests performed on this set of samples indicate that they all were derived from the same parent population (i.e., same source area). The same can be said on the basis of Nd isotopes, REE patterns and trace element concentrations. The two Cambrian samples, however, show contrasting signatures: The sample from the Cantabrian Zone lacks the ca. 0.85–1.15 Ga population and has a high proportion of Paleoproterozoic and Archean zircons (>60 %) and a more negative ε Nd and higher T DM values than the Ediacaran samples. The Early Cambrian sample from the Central Iberian Zone has the same U–Pb detrital zircon age distribution (based on KS tests) as all the Ediacaran samples but has a significantly more negative ε Nd value. These data suggest apparently continuous sedimentation in the NW Iberian realm of northern Gondwana between ca. 600 and 550 Ma and changes in the detrital influx around the Ediacaran–Cambrian boundary. The nature and origin of these changes cannot be determined with available data, but they must involve tectonic activity on the margin as evidenced by the angular unconformity separating the Ediacaran and Lower Cambrian strata in the Cantabrian Zone. The absence of this unconformity and the apparent continuity of detrital zircon age distribution between Ediacaran and Cambrian rocks in the Central Iberian Zone suggest that the margin became segmented with significant transport and sedimentation flux changes in relatively short distances. As to the paleoposition of NW Iberia in Ediacaran–Early Cambrian times, comparison of the data presented herein with a wealth of relevant data from the literature both on the European peri-Gondwanan terranes and on the terranes of northern Africa suggests that NW Iberia may have lain closer to the present-day Egypt–Israel–Jordan area and that the potential source of the hitherto enigmatic Tonian–Stenian zircons could be traced to exposed segments of arc terranes such as that described in the Sinai Peninsula (Be’eri-Shlevin et al. in Geology 40:403–406, 2012).  相似文献   

18.
Recent interpretation of seismic sections and free-air gravity anomalies in offshore northern Taiwan reveals that the southern Taiwan–Sinzi Folded Zone began to form in late Middle Miocene, though it was mainly constructed in the Late Pliocene with strong reverse faulting and folding. Two westward progradational sequences were deposited in the shelf basin with sediments supplied from the southern Taiwan–Sinzi Folded Zone and the southern Ryukyu Arc. These two structures are displaced by several northwest-striking dextral strike–slip faults that were active in the early Quaternary when the clockwise-rotated southern Ryukyu Arc and the folded southern Taiwan–Sinzi Folded Zone were broken. It is believed that recent extension in the southern Okinawa Trough started in the early Quaternary because uplift on the southern Taiwan–Sinzi Folded Zone continued to latest Pliocene–early Quaternary. Paleogene–Miocene sediments of the East China Sea Shelf in the western part of the southern Okinawa Trough Basin are interpreted to indicate that the East China Sea Shelf Basin extended to the east of the southern Taiwan–Sinzi Folded Zone.  相似文献   

19.
The Bekten Fault is 20-km long N55°E trending and oblique-slip fault in the dextral strike-slip fault zone. The fault is extending sub-parallel between Yenice-Gönen and Sar?köy faults, which forms the southern branch of North Anatolian Fault Zone in Southern Marmara Region. Tectonomorphological structures indicative of the recent fault displacements such as elongated ridges and offset creeks observed along the fault. In this study, we investigated palaeoseismic activities of the Bekten Fault by trenching surveys, which were carried out over a topographic saddle. The trench exposed the fault and the trench stratigraphy revealed repeated earthquake surface rupture events which resulted in displacements of late Pleistocene and Holocene deposits. According to radiocarbon ages obtained from samples taken from the event horizons in the stratigraphy, it was determined that at least three earthquakes resulting in surface rupture generated from the Bekten Fault within last ~1300 years. Based on the palaeoseismological data, the Bekten Fault displays non-characteristic earthquake behaviour and has not produced any earthquake associated with surface rupture for about the last 400 years. Additionally, the data will provide information for the role of small fault segments play except for the major structures in strike-slip fault systems.  相似文献   

20.
We study the margin of South East Deccan Volcanic Province around Kinwat lineament, Maharashtra, India, which is NW extension of the Kaddam Fault. Structural field studies document \(\sim \)E–W strike-slip mostly brittle faults from the basement granite. We designate this as ‘Western boundary East Dharwar Craton Strike-slip Zone’ (WBEDCSZ). At local level, the deformation regime from Kinwat, Kaddam Fault, micro-seismically active Nanded and seismically active Killari corroborate with the nearby lineaments. Morphometric analyses suggest that the region is moderately tectonically active. The region of intense strike-slip deformation lies between seismically active fault along Tapi in NW and Bhadrachalam in the SE part of the Kaddam Fault/lineament. The WBEDCSZ with the surface evidences of faulting, presence of a major lineaments and intersection of faults could be a zone of intraplate earthquake.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号