首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
A detailed study of the chemical composition of the groundwater surrounding the Mt. Hekla volcano in south Iceland was performed to assess fluid evolution and toxic metal mobility during CO2-rich fluid basalt interaction. These fluids provide a natural analogue for evaluating the consequences of CO2 sequestration in basalt. The concentration of dissolved inorganic C in these groundwaters decreases from 3.88 to 0.746 mmol/kg with increasing basalt dissolution while the pH increases from 6.9 to 9.2. This observation provides direct evidence of the potential for basalt dissolution to sequester CO2. Reaction path calculations suggest that dolomite and calcite precipitation is largely responsible for this drop in groundwater dissolved C concentration. The concentrations of toxic metal(loid)s in the waters are low, for example the maximum measured concentrations of Cd, As and Pb were 0.09, 22.8 and 0.06 nmol/kg, respectively. Reaction path modelling indicates that although many toxic metals may be initially liberated by the dissolution of basalt by acidic CO2-rich solutions, these metals are reincorporated into solid phases as the groundwaters are neutralized by continued basalt dissolution. The identity of the secondary toxic metal bearing phases depends on the metal. For example, calculations suggest that Sr and Ba are incorporated into carbonates, while Pb, Zn and Cd are incorporated into Fe (oxy)hydroxide phases.  相似文献   

2.
Crushed rock from two caprock samples, a carbonate-rich shale and a clay-rich shale, were reacted with a mixture of brine and supercritical CO2 (CO2–brine) in a laboratory batch reactor, at different temperature and pressure conditions. The samples were cored from a proposed underground CO2 storage site near the town of Longyearbyen in Svalbard. The reacting fluid was a mixture of 1 M NaCl solution and CO2 (110 bar) and the water/rock ratio was 20:1. Carbon dioxide was injected into the reactors after the solution had been bubbled with N2, in order to mimic O2-depleted natural storage conditions. A control reaction was also run on the clay-rich shale sample, where the crushed rock was reacted with brine (CO2-free brine) at the same experimental conditions. A total of 8 batch reaction experiments were run at temperatures ranging from 80 to 250 °C and total pressures of 110 bar (∼40 bar for the control experiment). The experiments lasted 1–5 weeks.Fluid analysis showed that the aqueous concentration of major elements (i.e. Ca, Mg, Fe, K, Al) and SiO2 increased in all experiments. Release rates of Fe and SiO2 were more pronounced in solutions reacted with CO2–brine as compared to those reacted with CO2-free brine. For samples reacted with the CO2–brine, lower temperature reactions (80 °C) released much more Fe and SiO2 than higher temperature reactions (150–250 °C). Analysis by SEM and XRD of reacted solids also revealed changes in mineralogical compositions. The carbonate-rich shale was more reactive at 250 °C, as revealed by the dissolution of plagioclase and clay minerals (illite and chlorite), dissolution and re-precipitation of carbonates, and the formation of smectite. Carbon dioxide was also permanently sequestered as calcite in the same sample. The clay-rich shale reacted with CO2–brine did not show major mineralogical alteration. However, a significant amount of analcime was formed in the clay-rich shale reacted with CO2-free brine; while no trace of analcime was observed in either of the samples reacted with CO2–brine.  相似文献   

3.
The aim of this experimental study was to evaluate and compare the geochemical impact of pure and impure CO2 on rock forming minerals of possible CO2 storage reservoirs. This geochemical approach takes into account the incomplete purification of industrial captured CO2 and the related effects during injection, and provides relevant data for long-term storage simulations of this specific greenhouse gas. Batch experiments were conducted to investigate the interactions of supercritical CO2, brine and rock-forming mineral concentrates (albite, microcline, kaolinite, biotite, muscovite, calcite, dolomite and anhydrite) using a newly developed experimental setup. After up to 42 day (1000 h) experiments using pure and impure supercritical CO2 the dissolution and solution characteristics were examined by XRD, XRF, SEM and EDS for the solid, and ICP–MS and IC for the fluid reactants, respectively. Experiments with mixtures of supercritical CO2 (99.5 vol.%) and SO2 or NO2 impurities (0.5 vol.%) suggest the formation of H2SO4 and HNO3, reflected in pH values between 1 and 4 for experiments with silicates and anhydrite and between 5 and 6 for experiments with carbonates. These acids should be responsible for the general larger amount of cations dissolved from the mineral phases compared to experiments using pure CO2. For pure CO2 a pH of around 4 was obtained using silicates and anhydrite, and 7–8 for carbonates. Dissolution of carbonates was observed after both pure and impure CO2 experiments. Anhydrite was corroded by approximately 50 wt.% and gypsum precipitated during experiments with supercritical CO2 + NO2. Silicates do not exhibit visible alterations during all experiments but released an increasing amount of cations in the reaction fluid during experiments with impure CO2. Nonetheless, precipitated secondary carbonates could not be identified.  相似文献   

4.
  相似文献   

5.
The global rise in atmospheric greenhouse gas concentrations calls for practicable solutions to capture CO2. In this study, a mineral carbonation process was applied in which CO2 reacts with alkaline lignite ash and forms stable carbonate solids. In comparison to previous studies, the assays were conducted at low temperatures and pressures and under semi-dry reaction conditions in an 8 L laboratory mixing device. In order to find optimum process conditions the pCO2 (10-20%), stirring rate (500-3000 rpm) and the liquid to solid ratio (L/S = 0.03-0.36 L kg−1) were varied. In all experiments a considerable CO2 uptake from the gas phase was observed. Concurrently the solid phase contents of Ca and Mg (hydr)oxides decreased and CaCO3 and MgCO3 fractions increased throughout the experiments, showing that CO2 was stabilized as a solid carbonate. The carbonation reaction depends on three factors: Dissolution of CO2 in the liquid phase, mobilization of Ca and Mg from the mineral surface and precipitation of the carbonate solids. Those limitations were found to depend strongly on the variation of the process parameters. Optimum reaction conditions could be found for L/S ratios between 0.12 and 0.18, medium stirring velocities and pCO2 between 10% and 20%.Maximum CO2 uptake by the solid phase was 4.8 mmol g−1 after 120 min, corresponding to a carbonation efficiency for the alkaline material of 53% of the theoretical CO2 binding capacity. In comparison to previous studies both CO2 uptake and carbonation efficiencies were in a similar range, but the reaction times in the semi-dry process were considerably shorter. The proposed method additionally allows for a more simple carbonation setup due to low T and P, and produces an easier to handle product with low water content.  相似文献   

6.
Reservoir and cap-rock core samples with variable lithology's representative of siliciclastic reservoirs used for CO2 storage have been characterized and reacted at reservoir conditions with an impure CO2 stream and low salinity brine. Cores from a target CO2 storage site in Queensland, Australia were tested. Mineralogical controls on the resulting changes to porosity and water chemistry have been identified. The tested siliciclastic reservoir core samples can be grouped generally into three responses to impure CO2-brine reaction, dependent on mineralogy. The mineralogically clean quartzose reservoir cores had high porosities, with negligible change after reaction, in resolvable porosity or mineralogy, calculated using X-ray micro computed tomography and QEMSCAN. However, strong brine acidification and a high concentration of dissolved sulphate were generated in experiments owing to minimal mineral buffering. Also, the movement of kaolin has the potential to block pore throats and reduce permeability. The reaction of the impure CO2-brine with calcite-cemented cap-rock core samples caused the largest porosity changes after reaction through calcite dissolution; to the extent that one sample developed a connection of open pores that extended into the core sub-plug. This has the potential to both favor injectivity but also affect CO2 migration. The dissolution of calcite caused the buffering of acidity resulting in no significant observable silicate dissolution. Clay-rich cap-rock core samples with minor amounts of carbonate minerals had only small changes after reaction. Created porosity appeared mainly disconnected. Changes were instead associated with decreases in density from Fe-leaching of chlorite or dissolution of minor amounts of carbonates and plagioclase. The interbedded sandstone and shale core also developed increased porosity parallel to bedding through dissolution of carbonates and reactive silicates in the sandy layers. Tight interbedded cap-rocks could be expected to act as baffles to fluids preventing vertical fluid migration. Concentrations of dissolved elements including Ca, Fe, Mn, and Ni increased during reactions of several core samples, with Mn, Mg, Co, and Zn correlated with Ca from cap-rock cores. Precipitation of gypsum, Fe-oxides and clays on seal core samples sequestered dissolved elements including Fe through co-precipitation or adsorption. A conceptual model of impure CO2-water-rock interactions for a siliciclastic reservoir is discussed.  相似文献   

7.
The carbonates, clays and major chemical compositions of lacustrine sediments in Nam Co (Lake) were examined by X-ray diffraction, scanning electron microscopy and chemical analysis. Carbonates include monohydrocalcite (MHC, first report from China and in a high-altitude lake), low-Mg calcite and traces of dolomite. MHC in Nam Co is developed in water (1.8 g/L) with high Mg/Ca molar ratios (10.03–15.03), high pH (8.04–9.72) and the presence of bacteria, algae, diatom and ostracoda. Illite and Mg-chlorite provide a strong evidence for physical weathering in the Holocene. Most Ca and Sr in sediments originate from carbonates as the molar ratios of Ca and CO32− are all less than 1 and the curve of Sr is very similar to that of Ca. However, most of the Mg, Fe and Rb are from clays. The lake water shifted from a fresh water environment to an evaporative, alkaline environment by 2.06 cal. ka BP. There was a depositional event that the depositional rate changed from 0.134 to 1.639 mm/a at about 2 cal. ka BP.  相似文献   

8.
We use a reactive diffusion model to investigate what happens to CO2 injected into a subsurface sandstone reservoir capped by a chlorite- and illite-containing shale seal. The calculations simulate reaction and transport of supercritical (SC) CO2 at 348.15 K and 30 MPa up to 20,000 a. Given the low shale porosity (5%), chemical reactions mostly occurred in the sandstone for the first 2000 a with some precipitation at the ss/sh interface. From 2000 to 4000 a, ankerite, dolomite and illite began replacing Mg–Fe chlorite at the sandstone/shale interface. Transformation of chlorite to ankerite is the dominant reaction occluding the shale porosity in most simulations: from 4000 to 7500 a, this carbonation seals the reservoir and terminates reaction. Overall, the carbonates (calcite, ankerite, dolomite), chlorite and goethite all remain close to local chemical equilibrium with brine. Quartz is almost inert from the point of its dissolution/precipitation. However, the rate of quartz reaction controls the long-term decline in aqueous silica activity and its evolution toward equilibrium. The reactions of feldspars and clays depend strongly on their reaction rate constants (microcline is closer to local equilibrium than albite). The timing of porosity occlusion mostly therefore depends on the kinetic constants of kaolinite and illite. For example, an increase in the kaolinite kinetic constant by 0.25 logarithmic units hastened porosity closure by 4300 a. The earliest simulated closure of porosity occurred at approximately 108 a for simulations designed as sensitivity tests for the rate constants.These simulations also emphasize that the rate of CO2 immobilization as aqueous bicarbonate (solubility trapping) or as carbonate minerals (mineral trapping) in sandstone reservoirs depends upon reaction kinetics – but the relative fraction of each trapped CO2 species only depends upon the initial chemical composition of the host sandstone. For example, at the point of porosity occlusion the fraction of bicarbonate remaining in solution depends upon the initial Na and K content in the host rock but the fraction of carbonate mineralization depends only on the Ca, Mg, Fe content. Since ankerite is the dominant mineral that occludes porosity, the dissolved concentration of ferrous iron is also an important parameter. Future efforts should focus on cross-comparisons and ground-truthing of simulations made for standard case studies as well as laboratory measurements of the reactivities of clay minerals.  相似文献   

9.
A laboratory geochemical study was conducted using a drill core sample of cap rock from the Surat Basin, Australia, to investigate the effect of NO2 contained in the CO2 gas exhausted from the oxyfuel combustion process (oxyfuel combustion CO2) on the cap rock. A gas (CO2 containing NO2) was prepared to simulate the exhaust gas produced from the oxyfuel combustion process. Two types of gases (pure CO2 and CO2 containing SO2) were also prepared as reference gases. The effect of NO2 on cap rock was studied experimentally using these gases. No differences in the amounts of leached ions and pH changes for CO2 containing NO2 (36 ppmv), pure CO2, and CO2 containing SO2 (35 ppmv) existed. The pH values decreased immediately after CO2 gas injection but increased with time as a result of mineral buffering. Leaching of Fe, Mg, Ca, and K was suggested to have occurred as the result of dissolution of Fe-chlorite, prehnite and illite-smectite mixed layer clay in the shale sample. The amounts of Ca, Fe, and Mg leached with CO2 containing NO2 (318 ppmv) were higher than those for pure CO2. For the mixture containing 318 ppmv NO2, the pH increased more than that for the other gas conditions immediately after the pH fall at the start of the experiment, because oxidation-reduction reactions occurred between Fe2+ and NO3−. Moreover, the results indicated that some of the leached Ca and Fe were deposited on the shale sample because of the pH increase. Therefore, we concluded that the effects of NO2 on mineral dissolution and pH changes of formation water are negligible when oxyfuel combustion CO2 containing about 30 ppmv of NO2 is injected into an underground aquifer. In addition, even if about 300 ppmv NO2 is accidentally injected into the underground aquifer, mineral dissolution is suppressed due to the buffering of pH decrease after gas injection.  相似文献   

10.
Geological sequestration of CO2 is one of the options studied to reduce greenhouse gas emissions. Although the feasibility of this concept is proven, apart from literature data on modelling still little is known about the CO2–water–rock interactions induced by CO2-injection.To evaluate the effect of CO2–water–rock interactions on three sandstone aquifers in NE-Belgium an experimental setup was built. Eighteen experiments were performed in which sandstones were exposed to supercritical CO2. CO2–water–rock interactions were deduced from the evolution of aqueous concentrations of 25 species and a thorough characterisation of the sandstones before and after treatment. The results show that dissolution of ankerite/dolomite and Al-silicates could enhance porosity/permeability. The observed precipitation of end-member carbonates could increase storage capacity if it exceeds carbonate dissolution. Precipitation of the latter and of K-rich clays as observed, however, can hamper the injection.  相似文献   

11.
Reactions of CO2 with carbonate and silicate minerals in continental sediments and upper part of the crystalline crust produce HCO3− in river and ground waters. H2SO4 formed by the oxidation of pyrite and reacting with carbonates may produce CO2 or HCO3−. The ratio, ψ, of atmospheric or soil CO2 consumed in weathering to HCO3− produced depends on the mix of CO2 and H2SO4, and the proportions of the carbonates and silicates in the source rock. An average sediment has a CO2 uptake potential of ψ = 0.61. The potential increases by inclusion of the crystalline crust in the weathering source rock. A mineral dissolution model for an average river gives ψ = 0.68 to 0.72 that is within the range of ψ = 0.63 to 0.75, reported by other investigators using other methods. These results translate into the CO2 weathering flux of 20 to 24 × 1012mol/yr.  相似文献   

12.
《地学前缘(英文版)》2018,9(6):1945-1955
CO2 mineral sequestration (in ultrabasic or basaltic rocks) has been considered as a promising long-term and stable approach to reduce CO2 in the atmosphere and would counteract the effect of global warming. Meanwhile, clays are widely found in ultrabasic reservoirs. In our study, clays were observed in natural olivine samples, which were used for laboratory experiments in a supercritical CO2 system at 140 °C and 15 MPa. Initial olivine samples were crushed into two sizes which were large grains of ∼850–1000 μm and powder particles of ∼75–150 μm, with the durations of 400 and 1000 h for the powder and grains, respectively. The results showed amorphous silica was newly formed and this passivating layer could mitigate the water-rock interaction to some extent, but it would not play a long-term prohibited effect on secondary mineral carbonate formation as it is a Fe(III) free silica coating. More interestingly, the secondary carbonates were observed to form near the surface sites where locates more clays. Our findings provide insights into the reaction mechanisms of olivine-scCO2-water interaction process in natural ultrabasic rocks.  相似文献   

13.
The use of radioactive isotopes plays a very important role in dating groundwater, providing an apparent age of the systems in the framework of the aquifers conceptual modelling making available important features about the water fluxes, such as recharge, horizontal flow rates and discharge. In this paper, special emphasis has been put on isotopic constraints in the use of δ13C and 14C content as a dating tool in some hot (76 °C) and cold (17 °C) CO2-rich mineral waters discharging in the Vilarelho da Raia–Pedras Salgadas region (N-Portugal). The radiocarbon content determined in these CO2-rich mineral waters (14C activity from 4.3 up to 9.9 pmc) is incompatible with the systematic presence of 3H (from 1.7 to 7.9 TU). The δ13C values of the studied CO2-rich mineral waters indicate that the total C in the recharge waters is being masked by larger quantities of CO2 (14C-free) introduced from deep-seated (upper mantle) sources. This paper demonstrates that a good knowledge of mineral water systems is essential to allow hydrologists to make sound conclusions on the use of C isotopic data in each particular situation.  相似文献   

14.
Intensive carbonate and clay mineral authigenesis took place throughout the Late Permian Bowen-Gunnedah-Sydney basin system in eastern Australia. We conducted isotopic and trace element analyses of carbonate and clay minerals from clastic sedimentary rocks of the Gunnedah Basin and the Denison Trough in the Bowen Basin. Rb-Sr isochron age data of the illitic clays are consistent with episodic hydrothermal fluid flow events that occurred in association with Gondwana rifting accompanied by alkaline magmatism at ∼85 Ma and ∼95 Ma. Stable isotope data of carbonate and clay minerals from the Gunnedah Basin are indicative of meteoric waters from a high-latitude environment as the main fluid source, whereas trace element, Sr and Nd isotope data highlight mixing of meteoric fluids with magmatic and/or crustal components, with a possible input from marine carbonates for some samples. Trace metals, oxygen and strontium isotopes of dawsonites from the Denison Trough are interpreted to have been mobilised by fluids that interacted with evolved clastic sedimentary and marine carbonate end members. According to the carbon isotope data, CO2 for calcite and ankerite precipitation was sourced mainly from thermal degradation of organic matter and magmatism, whereas the CO2 used for dawsonite formation is inferred to have been derived from magmatic and marine sources. In the low permeability environments (particularly in coal seams), the increasing accumulation and oversaturation of CO2 particularly promote the precipitation of dawsonite.  相似文献   

15.
The rates of Fe(II) oxidation and precipitation from groundwater are highly pH dependent. Elevated levels of dissolved CO2 can depress pH and cause difficulty in removing dissolved Fe and associated metals during treatment of ferruginous water. This paper demonstrates interdependent changes in pH, dissolved inorganic C species, and Fe(II) oxidation rates that occur as a result of the removal (degassing) of CO2 during aeration of waters discharged from abandoned coal mines. The results of field monitoring of aeration cascades at a treatment facility as well as batchwise aeration experiments conducted using net alkaline and net acidic waters in the UK are combined with geochemical modelling to demonstrate the spatial and temporal evolution of the discharge water chemistry. The aeration cascades removed approximately 67% of the dissolved CO2 initially present but varying the design did not affect the concentration of Fe(II) leaving the treatment ponds. Continued removal of the residual CO2 by mechanical aeration increased pH by as much as 2 units and resulted in large increases in the rates of Fe(II) oxidation and precipitation. Effective exsolution of CO2 led to a reduction in the required lime dose for removal of remaining Fe(II), a very important factor with regard to increasing the sustainability of treatment practices. An important ancillary finding for passive treatment is that varying the design of the cascades had little impact on the rate of CO2 removal at the flow rates measured.  相似文献   

16.
Chemical and isotope studies of natural CO2 accumulations aid in assessing the chemical effects of CO2 on rock and thus provide a potential for understanding the long-term geochemical processes involved in CO2 geological storage. Several natural CO2 accumulations were discovered during gas and oil exploration in France’s carbogaseous peri-Alpine province (south-eastern France) in the 1960s. One of these, the Montmiral accumulation at a depth of more than 2400 m, is currently being exploited. The chemical composition of the water collected at the wellhead has changed in time and the final salinity exceeds 75 g/L. These changes in time can be explained by assuming that the fraction of the reservoir brine in the recovered brine–CO2–H2O mixture varies, resulting in variable proportions of H2O and brine in the sampled water. The proportions can be estimated in selected samples due to the availability of gas and water flowrate data. These data enabled the reconstruction of the chemical and isotope composition of the brine. The proportions of H2O and brine can also be estimated from isotope (δ2H, δ18O) composition of collected water and δ18O of the sulfates or CO2. The reconstituted brine has a salinity of more than 85 g/L and, according to its Br− content and isotope (δ2H, δ18O, δ34S) composition, originates from an evaporated Triassic seawater that underwent dilution by meteoric water. The reconstitution of the brine’s chemical composition enabled an evaluation of the CO2–water–rock interactions based on: (1) mineral saturation indices; and (2) comparison with initial evaporated Triassic seawater. Dissolution of K- and SO4-containing minerals such as K-feldspar and anhydrite, and precipitation of Ca and Mg containing minerals that are able to trap CO2 (carbonates) are highlighted. The changes in concentration of these elements in the brine, which are attributed to CO2 interactions, illustrate the relevance of monitoring the water quality at future industrial CO2 storage sites.  相似文献   

17.
The objective of this study was to investigate the role of dissolved CO2 (H2CO3*) as a mechanism of cation removal from surface soils under secondary land uses in the tropics. Soil leachate columns were prepared with 0–10 cm soils from mature and secondary forest, and managed pastures, and extracted with H2CO3* from deionized water equilibrated with 0%, 0.5%, 1%, and 10% CO2 (g). Extraction of soil cations slowed over time following an exponential form for the cumulative data. The rate of cation concentration decline varied as a function of CO2 concentration with the 10% solution resulting in a greater percent decline with extraction volume. Potassium removal from the exchange sites of all soils and for all solutions was nearly complete ranging from 85% to 97% while removals of Mg (31% to 71%) and Ca (12% to 42%) were lower. The asymptotic patterns of cation loss observed in this study suggest that H2CO3* acid-driven losses of cations may become self-limiting over time. Other stronger acids from atmospheric deposition or organic sources may serve to perpetuate cation removal, and re-forestation on these cleared lands would certainly re-distribute cations from soils to vegetation.  相似文献   

18.
In a mid-continental North American grassland, solute concentrations in shallow, limestone-hosted groundwater and adjacent surface water cycle annually and have increased steadily over the 15-year study period, 1991-2005, inclusive. Modeled groundwater CO2, verified by measurements of recent samples, increased from 10−2.05 atm to 10−1.94 atm, about a 20% increase, from 1991 to 2005. The measured groundwater alkalinity and alkaline-earth element concentrations also increased over that time period. We propose that carbonate minerals dissolve in response to lowered pH that occurs during an annual carbonate-mineral saturation cycle. The cycle starts with low saturation during late summer and autumn when dissolved CO2 is high. As dissolved CO2 decreases in the spring and early summer, carbonates become oversaturated, but oversaturation does not exceed the threshold for precipitation. We propose that groundwater is a CO2 sink through weathering of limestone: soil-generated CO2 is transformed to alkalinity through dissolution of calcite or dolomite. The annual cycle and long-term increase in shallow groundwater CO2 is similar to, but greater than, atmospheric CO2.  相似文献   

19.
We determined total CO2 solubilities in andesite melts with a range of compositions. Melts were equilibrated with excess C-O(-H) fluid at 1 GPa and 1300°C then quenched to glasses. Samples were analyzed using an electron microprobe for major elements, ion microprobe for C-O-H volatiles, and Fourier transform infrared spectroscopy for molecular H2O, OH−, molecular CO2, and CO32−. CO2 solubility was determined in hydrous andesite glasses and we found that H2O content has a strong influence on C-O speciation and total CO2 solubility. In anhydrous andesite melts with ∼60 wt.% SiO2, total CO2 solubility is ∼0.3 wt.% at 1300°C and 1 GPa and total CO2 solubility increases by about 0.06 wt.% per wt.% of total H2O. As total H2O increases from ∼0 to ∼3.4 wt.%, molecular CO2 decreases (from 0.07 ± 0.01 wt.% to ∼0.01 wt.%) and CO32− increases (from 0.24 ± 0.04 wt.% to 0.57 ± 0.09 wt.%). Molecular CO2 increases as the calculated mole fraction of CO2 in the fluid increases, showing Henrian behavior. In contrast, CO32− decreases as the calculated mole fraction of CO2 in the fluid increases, indicating that CO32− solubility is strongly dependent on the availability of reactive oxygens in the melt. These findings have implications for CO2 degassing. If substantial H2O is present, total CO2 solubility is higher and CO2 will degas at relatively shallow levels compared to a drier melt. Total CO2 solubility was also examined in andesitic glasses with additional Ca, K, or Mg and low H2O contents (<1 wt.%). We found that total CO2 solubility is negatively correlated with (Si + Al) cation mole fraction and positively correlated with cations with large Gibbs free energy of decarbonation or high charge-to-radius ratios (e.g., Ca). Combining our andesite data with data from the literature, we find that molecular CO2 is more abundant in highly polymerized melts with high ionic porosities (>∼48.3%), and low nonbridging oxygen/tetrahedral oxygen (<∼0.3). Carbonate dominates most silicate melts and is most abundant in depolymerized melts with low ionic porosities, high nonbridging oxygen/tetrahedral oxygen (>∼0.3), and abundant cations with large Gibbs free energy of decarbonation or high charge-to-radius ratio. In natural silicate melt, the oxygens in the carbonate are likely associated with tetrahedral and network-modifying cations (including Ca, H, or H-bonds) or a combinations of those cations.  相似文献   

20.
Understanding mechanisms and kinetics of mineral carbonation reactions relevant to sequestering carbon dioxide as a supercritical fluid (scCO2) in geologic formations is crucial to accurately predicting long-term storage risks. Most attention so far has been focused on reactions occurring between silicate minerals and rocks in the aqueous dominated CO2-bearing fluid. However, water-bearing scCO2 also comprises a reactive fluid, and in this situation mineral carbonation mechanisms are poorly understood. Using in situ high-pressure X-ray diffraction, the carbonation of brucite [Mg(OH)2] in wet scCO2 was examined at pressure (82 bar) as a function of water concentration and temperature (50 and 75 °C). Exposing brucite to anhydrous scCO2 at either temperature resulted in little or no detectable reaction over three days. However, addition of trace amounts of water resulted in partial carbonation of brucite into nesquehonite [MgCO3·3H2O] within a few hours at 50 °C. By increasing water content to well above the saturation level of the scCO2, complete conversion of brucite into nesquehonite was observed. Tests conducted at 75 °C resulted in the conversion of brucite into magnesite [MgCO3] instead, apparently through an intermediate nesquehonite step. Raman spectroscopy applied to brucite reacted with 18O-labeled water in scCO2 show it was incorporated into carbonate at a relatively high concentration. This supports a carbonation mechanism with at least one step involving a direct reaction between the mineral and water molecules without mediation by a condensed aqueous layer.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号