共查询到20条相似文献，搜索用时 31 毫秒
1.
《Journal of South American Earth Sciences》2000,13(4-5):443-457
Stratigraphic assessment of the “Tierra Caliente Metamorphic Complex” (TCMC) between Arcelia and Teloloapan in southern Mexico, based on photo interpretation of Landsat Thematic Mapper images and field mapping at the 1:100,000 scale, tests different tectonic evolution scenarios that bear directly on the evolution of the southern North American plate margin. The regional geology, emphasizing the stratigraphy of a portion of the TCMC within the area between Arcelia and Teloloapan is presented. Stratigraphic relationships with units in adjacent areas are also described. The base of the stratigraphic section is a chlorite grade metamorphic sequence that includes the Taxco Schist, the Roca Verde Taxco Viejo Formation, and the Almoloya Phyllite Formation. These metamorphic units, as thick as 2.7 km, are covered disconformably by a sedimentary sequence, 2.9 km thick, composed of the Cretaceous marine Pochote, Morelos, and Mexcala Formations, as well as undifferentiated Tertiary continental red beds and volcanic rocks. The geology may be explained as the evolution of Mesozoic volcanic and sedimentary environments developed upon attenuated continental crust. Our results do not support accretion of the Guerrero terrane during Laramide (Late Cretaceous–Paleogene) time. 相似文献
2.
Nikolaus Froitzheim Sebastian Weber Thorsten J. Nagel Tobias Ibele Heinz Furrer 《International Journal of Earth Sciences》2012,101(5):1315-1329
The Triassic to Cretaceous sediment succession of the Lechtal Nappe in the western part of the Northern Calcareous Alps (NCA) has been deformed into large-scale folds and crosscut by thrust and extensional faults during Late Cretaceous (Eoalpine) and Tertiary orogenic processes. The following sequence of deformation is developed from overprinting relations in the field: (D1) NW-vergent folds related to thrusting; (D2) N–S shortening leading to east–west-trending folds and to the formation of a steep belt (Arlberg Steep Zone) along the southern border of the NCA; (D3) E–W to NE–SW extension and vertical shortening, leading to low-angle normal faulting and recumbent “collapse folds” like the Wildberg Syncline. D1 and D2 are Cretaceous in age and predate the Eocene emplacement of the Austroalpine on the Penninic Nappes along the Austroalpine basal thrust; the same is probably true for D3. Finally, the basal thrust was deformed by folds related to out-of-sequence thrusting. These results suggest that the NCA were at least partly in a state of extension during the sedimentation of the Gosau Group in the Late Cretaceous. 相似文献
3.
《Journal of South American Earth Sciences》2000,13(4-5):297-324
The composite Guerrero Terrane of western Mexico records much of the magmatic evolution of southwestern North America during Late Mesozoic time. The Guerrero includes three distinctive subterranes characterized by unique stratigraphic records, structural evolutions, and geochemical and isotopic features that strongly suggest they evolved independently. The eastern Teloloapan Subterrane represents an evolved intra-oceanic island arc of Hauterivian to Cenomanian age, which includes a high-K calc-alkaline magmatic suite. The central Arcelia–Palmar Chico Subterrane represents a primitive island arc-marginal basin system of Albian to Cenomanian age, consisting of an oceanic suite and a tholeiitic arc suite. The western Zihuatanejo–Huetamo Subterrane comprises three components that represent an evolved island arc-marginal basin-subduction complex system of Late Jurassic (?) –Early Cretaceous age built on a previously deformed basement. The Zihuatanejo Sequence includes a thick high-K calc-alkaline magmatic suite. The Las Ollas Complex consists of tectonic slices containing exotic blocks of arc affinity affected by high-pressure/low-temperature metamorphism included in a sheared matrix. The Huetamo Sequence consists mainly of volcanic-arc derived sedimentary rocks, including large pebbles of tholeiitic, calc-alkaline, and shoshonitic lavas. These sequences are unconformably underlain by the Arteaga Complex, which represents the subvolcanic basement. On the basis of available geology, geochemistry, geochronology, and isotopic data, we suggest that Late Mesozoic volcanism along the western margin of southern North America developed in broadly contemporaneous but different intra-oceanic island arcs that constitute a complex fossil arc-trench system similar to the present-day western Pacific island arc system. 相似文献
4.
《International Geology Review》2012,54(5):574-589
The Guerrero terrane comprises Middle Jurassic–Early Cretaceous arc successions that were accreted to the North American craton in the late Early Cretaceous, producing closure of the Arperos oceanic basin and the formation of an approximately 100 km-wide fold–thrust belt. Such a suture is key to investigating the structural evolution related to Guerrero terrane accretion and, in general, to arc–continent collisional zones. The Sierra de Guanajuato is an exposure of the Guerrero terrane suture belt and consists of a complex tectonic pile that formed through at least three major shortening phases: D1SG, D2SG, and D3SG (SG, Sierra de Guanajuato). During the D1SG and D2SG phases, the Upper Jurassic–Lower Cretaceous successions of the Arperos Basin piled up, forming a doubly vergent imbricate fan of thrust sheets that accommodated substantial NE–SW shortening. Mylonite microtextures, as well as syntectonic minerals, indicate that the D1SG and D2SG deformation events took place under low greenschist-facies metamorphic conditions. We relate these deformation phases to the progressive NE migration of the Guerrero terrane, which triggered the collapse and closure of the Arperos Basin. During D3SG, the El Paxtle arc assemblage of the Guerrero terrane was tectonically emplaced onto the previously deformed successions of the Arperos Basin. However, D3SG structures indicate that during this deformational stage, the main shortening direction was oriented NW–SE and that contraction was accommodated mostly by SE-vergent ductile thrusts formed under low greenschist-facies metamorphic conditions. We suggest that the top-to-the-SE emplacement of the El Paxtle assemblage may be a result of the tectonic escape of the arc produced by the continuous NE impingement of the Guerrero terrane during its collisional addition to the Mexican mainland. 相似文献
5.
Maher A. El Amawy Ahmed M. Muftah Mohamed Abd El-Wahed Aymn Nassar 《Arabian Journal of Geosciences》2011,4(7-8):1067-1085
Al Jabal Al Akhdar is a NE/SW- to ENE/WSW-trending mobile part in Northern Cyrenaica province and is considered a large sedimentary belt in northeast Libya. Ras Al Hilal-Al Athrun area is situated in the northern part of this belt and is covered by Upper Cretaceous–Tertiary sedimentary successions with small outcrops of Quaternary deposits. Unmappable and very restricted thin layers of Palaeocene rocks are also encountered, but still under debate whether they are formed in situ or represent allochthonous remnants of Palaeocene age. The Upper Cretaceous rocks form low-lying to unmappable exposures and occupy the core of a major WSW-plunging anticline. To the west, south, and southeast, they are flanked by high-relief Eocene, Oligocene, and Lower Miocene rocks. Detailed structural analyses indicated structural inversion during Late Cretaceous–Miocene times in response to a right lateral compressional shear. The structural pattern is themed by the development of an E–W major shear zone that confines inside a system of wrench tectonics proceeded elsewhere by transpression. The deformation within this system revealed three phases of consistent ductile and brittle structures (D1, D2, and D3) conformable with three main tectonic stages during Late Cretaceous, Eocene, and Oligocene–Early Miocene times. Quaternary deposits, however, showed at a local scale some of brittle structures accommodated with such deformation and thus reflect the continuity of wrenching post-the Miocene. D1 deformation is manifested, in Late Cretaceous, via pure wrenching to convergent wrenching and formation of common E- to ENE-plunging folds. These folds are minor, tight, overturned, upright, and recumbent. They are accompanied with WNW–ESE to E–W dextral and N–S sinistral strike-slip faults, reverse to thrust faults and pop-up or flower structures. D2 deformation initiated at the end of Lutetian (Middle Eocene) by wrenching and elsewhere transpression then enhanced by the development of minor ENE–WSW to E–W asymmetric, close, and, rarely, recumbent folds as well as rejuvenation of the Late Cretaceous strike-slip faults and formation of minor NNW–SSE normal faults. At the end of Eocene, D2 led to localization of the movement within E–W major shear zone, formation of the early stage of the WSW-plunging Ras Al Hilal major anticline, preservation of the contemporaneity (at a major scale) between the synthetic WNW–ESE to E–W and ENE–WSW strike-slip faults and antithetic N–S strike-slip faults, and continuity of the NW–SE normal faults. D3 deformation is continued, during the Oligocene-Early Miocene, with the appearance of a spectacular feature of the major anticline and reactivation along the E–W shear zone and the preexisting faults. Estimating stress directions assumed an acted principal horizontal stress from the NNW (N33°W) direction. 相似文献
6.
Several thrust faults have been mapped in theYanshan belt ,as the thrust structure was first iden-tified by Wong (1928) (Ji et al .,2005 ; Wang et al .,2005a ;Davis et al .,2001 ,1998 ; Yang et al .,2001 ;Zheng et al ., 2000 ; Chen, 1998 ; Zhang et al .,1986 ; He ,1957 ;Chern and Hsiung,1935) .Becausethe Archean basement was widely involved in thethrust systemof the Yanshan belt ,domestic popularrecognition emphasized the thick-skinned characteris-tics and li mited horizontal displacement… 相似文献
7.
8.
A paleomagnetic study of platform-facies carbonate rocks of the mid-Cretaceous Morelos Formation and deep-water carbonate rocks of the overlying Upper Cretaceous Mezcala Formation, sampled at Zopilote canyon, in Guerrero State, southern Mexico, indicates that their characteristic magnetization was acquired contemporaneously with folding of these rocks during the Late Cretaceous Laramide orogeny. The remanence carrier is interpreted to be magnetite, although other mineral phases of high coercivity carry recent secondary overprints. The overall mean is of Dec=323.1° and Inc=36.5° (k=162.7; α95=2.7°; N=18 sites; 64% unfolding). Comparison with the North America reference direction indicates that this area has experienced a small, yet statistically significant, counterclockwise direction of 19.2±4.0°. Similar rotations are documented in other localities from southern Mexico; rotations are linked to mid-Tertiary deformation associated with the left-lateral strike-slip fault system that accommodated motion of the Chortis and Xolapa blocks. 相似文献
9.
Abdullah O. Bamousa 《Arabian Journal of Geosciences》2013,6(6):2035-2044
Mount Ablah is a mining prospect, hosted by a dioritic igneous body that is bound to the east by greenschist grade metamorphic rocks and to the west by Ablah group volcano–sedimentary rocks. Rock units of Mount Ablah area were remapped through field investigations, petrological studies, and analysis of enhanced TM Landsat data. Ablah group rocks were divided into lower tuffaceous and upper epiclastic units. The epiclastic unit was divided into three subunits. During remapping, a sliver of serpentinite was discovered, which occurs between the dioritic igneous body and Ablah group rocks. The greenschist grade metamorphic rocks were intruded by Late Proterozoic quartz diorite prior to deposition of Ablah group rocks. The epiclastic unit is an infracambrian molassic unit that filled a graben, known as the Ablah graben. The Mount Ablah area was intruded by post-tectonic granitic rocks and affected by two superimposed F1-F2 folding events, associated with thrust and dextral faults, respectively. The first folding event involved N–S folding and thrusting. Simultaneously, stress partitioning at E–W accommodations zones produced E–W minor folds (F2) and associated E–W dextral faults. The F1–F2 folding events are contemporaneous with the Pan African deformation event, also known as the East African Orogeny (EAO). The EAO is infracambrian in age and culminated in development of the Najd sinistral fault system. The E–W dextral faults were probably reactivated during Cenozoic Red Sea rifting. The Ablah graben's infracambrian sedimentary rocks, such as siltstone, sandstone, and limestone that are mainly bound within the Ablah graben were not deformed prior to F1–F2 folding. Thus, the upper epiclastic unit of the Ablah group rocks is rheologically different from the surrounding greenschist rocks, responded to the late E–W compression in a more ductile manner than the surrounding greenschist rocks. Therefore, the Ablah graben was inverted, refolded, and crosscut by E–W dextral faults during the infracambrian EAO event, prior to development of Najd sinistral fault system, which are evident in Asir Terrane and crosscut Ablah graben. 相似文献
10.
Lower Palaeozoic sedimentary and volcanic rocks east of Queanbeyan, N.S.W., have undergone multiple deformation resulting in four systems of folds. The first of these consists of large isoclinal, recumbent folds (F1). The second generation folds (F2) are the most pronounced; they consist of flattened flexural‐slip folds with well developed axial‐plane slaty cleavage. Minor variants of this system are associated with meridionally‐trending faults. Third and fourth generation folds are minor kink systems. The existence of first generation folds was established on the basis of F2 fold‐facing determinations, and their likely form was deduced from the geometrical variations of F2 folds. It is thought that all fold phases developed during the Late Silurian Bowning Orogeny. 相似文献
11.
为更好理解燕山带的构造,作者在燕山地区开展了构造填图.在近年的构造填图中于辽宁省绥中县永安堡地区识别出大型的构造窗,其原始的逆掩推覆构造系统上盘由太古宇片麻岩及上覆岩系组成,而下盘由强烈韧性变形的张家口组火山岩系组成.填图结果表明,永安堡地区并不是一个张家口组岩层形成的宽缓向斜,也不是大型古火山机构.燕山地区在早白垩世张家口组火山岩喷发之后仍然存在强烈的区域挤压变形作用.基于野外观察和填图工作,我们认为国内已发表的地质图件未能真实反映燕山带的区域构造基本特征. 相似文献
12.
SHU Liangshu CHARVET Jacques GUO Lingzhi LU Huafu LAURENT-CHARVET Sebastien 《《地质学报》英文版》1999,73(2):148-162
The nearly E-W-trending Aqqikkudug-Weiya zone, more than 1000 km long and about 30 km wide, is an important segment in the Central Asian tectonic framework. It is distributed along the northern margin of the Central Tianshan belt in Xinjiang, NW China and is composed of mylonitized Early Palaeozoic greywacke, volcanic rocks, ophiolitic blocks as a mélange complex, HP/LT-type bleuschist blocks and mylonitized Neoproterozoic schist, gneiss and orthogneiss. Nearly vertical mylonitic foliation and sub-horizontal stretching lineation define its strike-slip feature; various kinematic indicators, such as asymmetric folds, non-coaxial asymmetric macro- to micro-structures and C-axis fabrics of quartz grains of mylonites, suggest that it is a dextral strike-slip ductile shear zone oriented in a nearly E-W direction characterized by "flower" strusture with thrusting or extruding across the zone toward the two sides and upright folds with gently plunging hinges. The Aqqikkudug-Weiya zone experienced at least two stages of ductile shear tectonic evolution: Early Palaeozoic north vergent thrusting ductile shear and Late Carboniferous-Early Permian strike-slip deformation. The strike-slip ductile shear likely took place during Late Palaeozoic time, dated at 269(5 Ma by the40Ar/39Ar analysis on neo-muscovites. The strike-slip deformation was followed by the Hercynian violent S-type granitic magmatism. Geodynamical analysis suggests that the large-scale dextral strike-slip ductile shearing is likely the result of intracontinental adjustment deformation after the collision of the Siberian continental plate towards the northern margin of the Tarim continental plate during the Late Carboniferous. The Himalayan tectonism locally deformed the zone, marked by final uplift, brittle layer-slip and step-type thrust faults, transcurrent faults and E-W-elongated Mesozoic-Cenozoic basins. 相似文献
13.
In Cap Corse, progressive deformation during Late Cretaceous obduction of the ophiolitic Schistes Lustrés (sensu lato) as a pile of imbricate, lens-shaped units during blueschist facies metamorphism was non-coaxial. Two zones are recognized: a lower series emplaced towards the west is overlain by a series emplaced towards the south-southwest in Cap Corse. Equivalent structures (differing only in orientation) occur in both zones. The change in thrust direction was responsible for local refolding and reorientation of previously formed structures, parallel to the new stretching direction immediately below the thrust contact between the two zones, and within localized shear zones in the underlying series.Both zones are refolded about E-overturned F2 folds trending between 350 and 025°. Local minor E-directed thrusts occur associated with the F2 folds. This second deformation of Middle Eocene age is considered to be related to the backthrusting of an overlying klippe containing gneisses of South Alpine origin, and is followed by a third Late Eocene phase of upright 060°-trending F3 folds accompanied by greenschist facies metamorphism. 相似文献
14.
《International Geology Review》2012,54(14):1597-1634
The Miocene Chalcatzingo trondhjemitic volcanic field, sited along the southern margin of the Trans-Mexican Volcanic Belt, is a newly discovered locality with deep-seated crustal xenoliths that provide fundamental petrologic information on the nature of the unexposed metamorphic basement. The volcanic field lies along the eastern edge of the Cretaceous Guerrero-Morelos platform, which juxtaposes the Guerrero and Mixteco terranes of southern Mexico. Xenoliths consist of high temperature to ultra-high temperature metapelites as well as mafic and quartzofeldspathic gneisses, all of which show evidence of multiple granulite to amphibolite facies metamorphism and ductile deformation. A detailed petrologic study of representative xenoliths indicates a metamorphic evolution that apparently followed a clockwise pressure–temperature path leading from biotite-sillimanite1/kyanite(?)-quartz assemblages (M1) to the assemblage plagioclase-garnet-sillimanite2-rutile/ilmenite (M2) with a peak at ～9–11 kbar and >870°C. These conditions were followed by rapid uplift to <6 kbar and >800°C, which produced the decompression assemblage spinel-cordierite-sillimanite3-corundum ± orthopyroxene ± quartz (M3) before shallow emplacement of the xenolith-bearing trondhjemitic magma. Three possible sources for the xenoliths are considered: (1) early Mesozoic metasediments buried in the middle crust; (2) Precambrian lower crust; and (3) subducted Cenozoic sediments trapped in the mantle wedge. Based on the deep-seated, polymetamorphic nature of the xenoliths, the Nd depleted mantle model age of an orthogneissic xenolith, and on regional tectonostratigraphic considerations, we suggest that the xenolith source was Proterozoic continental crust. Although old zircon inheritance in the host trondhjemite is minimal, it may be explained by a lack of interaction of the magma with the traversed lithosphere. Studies of Palaeogene shallow intrusions exposed 140 km west of Chalcatzingo in the Guerrero terrane (Pepechuca plug) and 80 km southeast of that place in the Mixteco terrane (Puente Negro dikes) reveal the presence of similar very high-grade aluminous xenoliths. However, these magmas were probably generated by partial melting of Triassic–Jurassic metasediments of the Guerrero terrane underplated by basaltic magmas in Jurassic–earliest Cretaceous times or from Precambrian crust assimilated by underplated mafic magmas of Oligocene age, respectively. 相似文献
15.
The Gaoligong metamorphic zone is located southeast of the Eastern Himalayan Syntaxis in western Yunnan, China. The zone is characterized by four stages of deformation (D1–D4). D1 structures record early compressive deformation during the Indosinian orogeny, which formed tight to isoclinal F1 folds of bedding with a penetrative S1 foliation developed parallel to fold axial planes. Mid-crustal horizontal shearing during D2 resulted in overprinting of D1 structures. D1 and D2 structures are associated with granulite facies metamorphism. D3 doming resulted in late crustal thickening and the development of a regional NW–SE trending F3 antiform. Synchronous with or slightly subsequent to D3 deformation, the zone experienced D4 ductile strike-slip shearing, resulting in its exhumation to shallow crustal levels and retrograde metamorphism. Granitic D4 mylonites predominantly yield 40Ar/39Ar mica ages of 15–16 Ma, indicating that D4 dextral strike-slip shearing occurred in the Miocene. Weakly deformed leucogranite and protomylonite yield 40Ar/39Ar ages of 10–11 Ma, suggesting that ductile strike-slip shearing continued to the Late Miocene. The new 40Ar/39Ar data indicate that escape-related deformation along the Gaoligong strike-slip shear zone occurred in the Miocene. In association with recent geophysical studies, and on the basis of the structural, crystal preferred orientation (CPO), and geochronological data presented in this paper, we suggest that the Gaoligong metamorphic zone formed in response to intracontinental transpression in the southeast of Tibet, characterized as intense deformation and metamorphism at middle–upper crustal levels. 相似文献
16.
The Northern, Central, and Southern zones are distinguished by stratigraphic, lithologic, and structural features. The Northern Zone is characterized by Upper Silurian–Lower Devonian sedimentary rocks, which are not known in other zones. They have been deformed into near-meridional folds, which formed under settings of near-latitudinal shortening during the Ellesmere phase of deformation. In the Central Zone, mafic and felsic volcanic rocks that had been earlier referred to Carboniferous are actually Neoproterozoic and probably Early Cambrian in age. Together with folded Devonian–Lower Carboniferous rocks, they make up basement of the Central Zone, which is overlain with a angular unconformity by slightly deformed Lower (?) and Middle Carboniferous–Permian rocks. The Southern Zone comprises the Neoproterozoic metamorphic basement and the Devonian–Triassic sedimentary cover. North-vergent fold–thrust structures were formed at the end of the Early Cretaceous during the Chukchi (Late Kimmerian) deformation phase. 相似文献
17.
The Malaqet–Mundassah area lies on the western flank of the Northern Oman Mountains in the UAE and Oman. This area is a well-exposed example of Alpine thrusted and folded Ophiolitic assemblage and post-obduction autochthonous sequences. The hinge zones of the thrust propagation folds accommodated stronger deformation compared with the weaker deformation that occurred in the other parts of these folds. In this area, there have been three main tectonic shortening events, two associated with the formation of unconformities (pre-Late Campanian and Cretaceous/Tertiary) and one during the deposition of megabreccia and conglomerates units (Early–Middle Eocene). Each event continued mildly during the deposition of sediments above. Tectonism was accompanied by sea level changes so that the Malaqet–Mundassah area experienced two marine regressions and two transgressions between the Late Cretaceous and the Oligocene times. Activity of northwest striking (NE-dipping) thrust faults and similarly trending thrust-propagation folds is responsible for the formation of a local basin, the Malaqet–El Saah basin in which the Simsima, Muthaymimah, Saah, and Tawi Uwayyir formations of the area were deposited. The syn-sedimentary activity of thrusts, folds and strike-slip faults is documented in thickness variations, stratigraphic onlapping of formations towards the fold hinges, and the presence of megabreccia and conglomerate deposits not found elsewhere in the foreland basin. 相似文献
18.
《Geodinamica Acta》2003,16(2-6):99-117
The Bielsa thrust sheet is a south-verging unit of the Axial zone in the central Pyrenees. The Bielsa thrust sheet consists predominantly of a Variscan granite unconformably overlain by a thin cover of Triassic and Cretaceous deposits. During the Eocene–Oligocene, Pyrenean compression, displacement of the Bielsa thrust sheet generated a large-scale south-verging monocline. Low temperature deformation of the Bielsa thrust sheet resulted in the development of: (1) E–W trending, asymmetric folds in the Triassic cover with amplitudes up to 1.5 km; these folds of the cover are related with normal and reverse faults in the granite and with rigid-body block rotations. (2) Pervasive fracturing within the Bielsa granite is also attributed to Pyrenean deformation and is consistent with a NNE to ENE shortening direction; two main, conjugate fault systems are associated with this direction of shortening, as is a subvertical strike-slip system with shallow-plunging slickenside lineations and a moderately dipping fault system with reverse movement; and (3) in addition, we recognise strike-slip and reverse shear bands, associated with sericitisation and brittle deformation of quartz and feldspar in the granite, that enclose Triassic rocks. Basement deformation within the Bielsa thrust sheet can be related to movement of faults developed to accommodate internal deformation of the hanging wall. Several models are proposed to account for this deformation during the southward displacement of the thrust. 相似文献
19.
Mario Zelic Nicola Levi Alessandro Malasoma Michele Marroni Luca Pandolfi Branislav Trivic 《Geological Journal》2010,45(1):59-77
The easternmost zone of the Dinaric‐Hellenic belt is represented by the Vardar Zone, in which the Kopaonik Metamorphic Complex (KMC) is regarded as the lowermost unit. This complex is topped by the unmetamorphosed Brzece unit and is intruded by the Oligocene Kopaonik Intrusive complex. The KMC is characterized by a stratigraphy that includes metapelites and meta‐carbonates of Late Triassic age, associated with metabasites. It is characterized by a complex deformation history that comprises four phases: D1 to D4. The D1 phase structures occur only as relict structures, whereas the D2 phase structures are represented by isoclinal F2 folds, associated with a well‐developed S2 foliation. The estimated P‐T conditions for the D1 and D2 metamorphism are consistent with the upper greenschist facies. The D3 phase is characterized by west‐verging thrusts associated with upright folds. In contrast, the D4 phase is characterized by open folds (F4) associated with low‐angle normal faults. The D1 and D2 deformation phases developed during the shortening related to continental collision, whereas the subsequent D3 and D4 phases can be related to the progressive exhumation of the KMC. The D4 phase probably developed during extensional tectonics during and after emplacement of the Kopaonik Intrusive Complex. The data show that the continental units belonging to the Vardar zone had a long‐lived deformation history that was more complex that previously thought. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
20.
扬子地台西缘江浪变质核杂岩的出露地壳剖面构造地层柱 总被引：14，自引：0，他引：14
扬子地台西缘江浪变质核杂岩的出露地壳剖面构造地层柱自下而上由３个体系构成，即中元古界李伍岩群堆垛层系统，代表深部构造层次中多期、多体制变形变质改造后的扬子地台基底；古生代褶叠层系统（中间韧性流变层），其中的３个岩组具有不同的褶叠层构造地层型，其时代分别为奥陶纪、早志留世和二叠纪；最上部为浅部构造层次纵弯曲变形的三叠纪西康群板岩带。在各体系之间以及各体系内部，发育了一系列的顺层韧性剪切滑脱带；其中以分割基底堆垛层与下部盖层流变层的区域性韧性剪切滑脱带最具意义，我们称之为基底剥离滑脱带。 相似文献