Fluid–mineral reactions and melting of orthopyroxene–cordierite–biotite gneiss in the presence of H<Subscript>2</Subscript>O-CO<Subscript>2</Subscript>-NaCl and H<Subscript>2</Subscript>O-CO<Subscript>2</Subscript>-KCl fluids under parameters of granulite-facies metamorphism     

O. G. Safonov  S. A. Kosova 《Petrology》2017,25(5):458-485

Reactions and partial melting of peraluminous rocks in the presence of H₂O-CO₂–salt fluids under parameters of granulite-facies metamorphism were modeled in experiments on interaction between orthopyroxene–cordierite–biotite–plagioclase–quartz metapelite with H₂O, H₂O-CO₂, H₂O-CO₂-NaCl, and H₂O-CO₂-KCl fluids at 600 MPa and 850°C. Rock melting in the presence of H₂O and equimolar H₂O-CO₂ fluids generates peraluminous (A/CNK¹ > 1.1) melts whose composition corresponds to magnesian calcic or calc–alkaline S-type granitoids. The melts are associated with peritectic phases: magnesian spinel and orthopyroxene containing up to 9 wt % Al₂O₃. In the presence of H₂O-CO₂-NaCl fluid, cordierite and orthopyroxene are replaced by the association of K-Na biotite, Na-bearing gedrite, spinel, and albite. The Na₂O concentrations in the biotite and gedrite are functions of the NaCl concentrations in the starting fluid. Fluids of the composition H₂O-CO₂-KCl induce cordierite replacement by biotite with corundum and spinel and by these phases in association with potassium feldspar at X _KCl = 0.02 in the fluid. When replaced by these phases, cordierite is excluded from the melting reactions, and the overall melting of the metapelite is controlled by peritectic reactions of biotite and orthopyroxene with plagioclase and quartz. These reactions produce such minerals atypical of metapelites as Ca-Na amphibole and clinopyroxene. The compositions of melts derived in the presence of salt-bearing fluids are shifted toward the region with A/CNK < 1.1, as is typical of so-called peraluminous granites of type I. An increase in the concentrations of salts in the fluids leads to depletion of the melts in Al₂O₃ and CaO and enrichment in alkalis. These relations suggest that the protoliths of I-type peraluminous granites might have been metapelites that were melted when interacting with H₂O-CO₂-salt fluids. The compositions of the melts can evolve from those with A/CNK > 1.1 (typical of S-type granites) toward those with A/CNK = 1.0–1.1 in response to an increase in the concentrations of alkali salts in the fluids within a few mole percent. Our experiments demonstrate that the origin of new mineral assemblages in metapelite in equilibrium with H₂O-CO₂-salt fluids is controlled by the activities of alkaline components, while the H₂O and CO₂ activities play subordinate roles. This conclusion is consistent with the results obtained by simulating metapelite mineral assemblages by Gibbs free energy minimization (using the PERPE_X software), as shown in log(\({a_{{H_2}O}}\))–log(\({a_{N{a_2}O}}\)) and log(\({a_{{H_2}O}}\))–log(\({a_{{K_2}O}}\)) diagrams.  相似文献   

Measurements and calculations of solid-liquid equilibria in the ternary systems NaBr–Na<Subscript>2</Subscript>SO<Subscript>4</Subscript>–H<Subscript>2</Subscript>O and KBr–K<Subscript>2</Subscript>SO<Subscript>4</Subscript>–H<Subscript>2</Subscript>O at 348 K     

Shi-Hua Sang  Rui-Zhi Cui  Xue-Ping Zhang  Kai-Jie Zhang 《Geochemistry International》2017,55(12):1131-1139

According to the compositions of the underground brine resources in the west of Sichuan Basin, solubilities of the ternary systems NaBr–Na₂SO₄–H₂O and KBr–K₂SO₄–H₂O were investigated by isothermal method at 348 K. The equilibrium solid phases, solubilities of salts, and densities of the solutions were determined. On the basis of the experimental data, the phase diagrams and the density-composition diagrams were plotted. In the two ternary systems, the phase diagrams consist of two univariant curves, one invariant point and two crystallization fields. Neither solid solution nor double salts were found. The equilibrium solid phases in the ternary system NaBr–Na₂SO₄–H₂O are NaBr and Na₂SO₄, and those in the ternary system KBr–K₂SO₄–H₂O are KBr and K₂SO₄. Using the solubilities data of the two ternary subsystems at 348 K, mixing ion-interaction parameters of Pitzer’s equation θxxx, Ψxxx and Ψxxx were fitted by multiple linear regression method. Based on the chemical model of Pitzer’s electrolyte solution theory, the solubilities of phase equilibria in the two ternary systems NaBr–Na₂SO₄–H₂O and KBr–K₂SO₄–H₂O were calculated with corresponding parameters. The calculation diagrams were plotted. The results showed that the calculated values have a good agreement with experimental data.  相似文献   

Behaviour of Fe<Subscript>4</Subscript>O<Subscript>5</Subscript>–Mg<Subscript>2</Subscript>Fe<Subscript>2</Subscript>O<Subscript>5</Subscript> solid solutions and their relation to coexisting Mg–Fe silicates and oxide phases     

Laura?Uenver-ThieleEmail author  Alan?B.?Woodland  Nobuyoshi?Miyajima  Tiziana?Boffa?Ballaran  Daniel?J.?Frost 《Contributions to Mineralogy and Petrology》2018,173(3):20

Experiments at high pressures and temperatures were carried out (1) to investigate the crystal-chemical behaviour of Fe₄O₅–Mg₂Fe₂O₅ solid solutions and (2) to explore the phase relations involving (Mg,Fe)₂Fe₂O₅ (denoted as O₅-phase) and Mg–Fe silicates. Multi-anvil experiments were performed at 11–20 GPa and 1100–1600 °C using different starting compositions including two that were Si-bearing. In Si-free experiments the O₅-phase coexists with Fe₂O₃, hp-(Mg,Fe)Fe₂O₄, (Mg,Fe)₃Fe₄O₉ or an unquenchable phase of different stoichiometry. Si-bearing experiments yielded phase assemblages consisting of the O₅-phase together with olivine, wadsleyite or ringwoodite, majoritic garnet or Fe³⁺-bearing phase B. However, (Mg,Fe)₂Fe₂O₅ does not incorporate Si. Electron microprobe analyses revealed that phase B incorporates significant amounts of Fe²⁺ and Fe³⁺ (at least ~?1.0 cations Fe per formula unit). Fe-L_2,3-edge energy-loss near-edge structure spectra confirm the presence of ferric iron [Fe³⁺/Fe_tot?=?~?0.41(4)] and indicate substitution according to the following charge-balanced exchange: [4]Si⁴⁺?+?[6]Mg²⁺?=?2Fe³⁺. The ability to accommodate Fe²⁺ and Fe³⁺ makes this potential “water-storing” mineral interesting since such substitutions should enlarge its stability field. The thermodynamic properties of Mg₂Fe₂O₅ have been refined, yielding H°_1bar,298?=???1981.5 kJ mol^??1. Solid solution is complete across the Fe₄O₅–Mg₂Fe₂O₅ binary. Molar volume decreases essentially linearly with increasing Mg content, consistent with ideal mixing behaviour. The partitioning of Mg and Fe²⁺ with silicates indicates that (Mg,Fe)₂Fe₂O₅ has a strong preference for Fe²⁺. Modelling of partitioning with olivine is consistent with the O₅-phase exhibiting ideal mixing behaviour. Mg–Fe²⁺ partitioning between (Mg,Fe)₂Fe₂O₅ and ringwoodite or wadsleyite is influenced by the presence of Fe³⁺ and OH incorporation in the silicate phases.  相似文献   

Measurement of Mineral Solubilities in the Ternary Systems NaCl–PbCl<Subscript>2</Subscript>–H<Subscript>2</Subscript>O and MgCl<Subscript>2</Subscript>–PbCl<Subscript>2</Subscript>–H<Subscript>2</Subscript>O at 373 K     

Zhang Xue-Ping  Xu Jing-Shu  Sang Shi-Hua  Zhang Hai 《Geochemistry International》2018,56(12):1172-1178

  相似文献   

Deliquescence of NaCl–NaNO<Subscript>3</Subscript>, KNO<Subscript>3</Subscript>–NaNO<Subscript>3</Subscript>, and NaCl–KNO<Subscript>3</Subscript>salt mixtures from 90 to 120°C     

Susan?CarrollEmail author  Laura?Craig  Thomas?J?Wolery 《Geochemical transactions》2005,6(2):19

We conducted reversed deliquescence experiments in saturated NaCl–NaNO₃–H₂O, KNO₃–NaNO₃–H₂O, and NaCl–KNO₃–H₂O systems from 90 to 120°C as a function of relative humidity and solution composition. NaCl, NaNO₃, and KNO₃ represent members of dust salt assemblages that are likely to deliquesce and form concentrated brines on high-level radioactive waste package surfaces in a repository environment at Yucca Mountain, NV. Discrepancy between model prediction and experiment can be as high as 8% for relative humidity and 50% for dissolved ion concentration. The discrepancy is attributed primarily to the use of 25°C models for Cl–NO₃ and K–NO₃ ion interactions in the current Yucca Mountain Project high-temperature Pitzer model to describe the nonideal behavior of these highly concentrated solutions.  相似文献   

Mineral-fluid equilibria in the system CaO–MgO–SiO<Subscript>2</Subscript>–H<Subscript>2</Subscript>O–CO<Subscript>2</Subscript>–NaCl and the record of reactive fluid flow in contact metamorphic aureoles     

Wilhelm?HeinrichEmail author  Sergey?S.?Churakov  Matthias?Gottschalk 《Contributions to Mineralogy and Petrology》2004,148(2):131-149

Phase equilibria in the system CaO–MgO–SiO₂–CO₂–H₂O–NaCl are calculated to illustrate phase relations in metacarbonates over a wide-range of P–T–X[H₂O–CO₂–NaCl] conditions. Calculations are performed using the equation of state of Duan et al. (Geochim Cosmochim Acta 59:2869–2882, 1995) for H₂O–CO₂–NaCl fluids and the internally consistent data set of Gottschalk (Eur J Mineral 9:175–223, 1997) for thermodynamic properties of solids. Results are presented in isothermal-isobarical plots showing stable mineral assemblages as a function of fluid composition. It is shown that in contact-metamorphic P–T regimes the presence of very small concentrations of NaCl in the fluid causes almost all decarbonation reactions to proceed within the two fluid solvus of the H₂O–CO₂–NaCl system. Substantial flow of magma-derived fluids into marbles has been documented for many contact aureoles by shifts in stable isotope geochemistry of the host rocks and by the progress of volatile-producing mineral reactions controlled by fluid compositions. Time-integrated fluid fluxes have been estimated by combining fluid advection/dispersion models with the spatial arrangement of mineral reactions and isotopic resetting. All existing models assume that minerals react in the presence of a single phase H₂O–CO₂ fluid and do not allow for the effect that fluid immiscibility has on the flow patterns. It is shown that fluids emanating from calc-alkaline melts that crystallize at shallow depths are brines. Their salinity may vary depending mainly on pressure and fraction of crystallized melt. Infiltration-driven decarbonation reactions in the host rocks inevitably proceed at the boundaries of the two fluid solvus where the produced CO₂ is immiscible and may separate from the brine as a low salinity, low density H₂O–CO₂ fluid. Most parameters of fluid–rock interaction in contact aureoles that are derived from progress of mineral reactions and stable isotope resetting are probably incorrect because fluid phase separation is disregarded.  相似文献   

Mechanisms and rates of quartz dissolution in melts in the CMAS (CaO–MgO–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript>) system     

Cliff?S.?J.?ShawEmail author 《Contributions to Mineralogy and Petrology》2004,148(2):180-200

The dissolution rate of minerals in silicate melts is generally assumed to be a function of the rate of mass transport of the released cations in the solvent. While this appears to be the case in moderately to highly viscous solvents, there is some evidence that the rate-controlling step may be different in very fluid, highly silica undersaturated melts such as basanites. In this study, convection-free experiments using solvent melts with silica activity from 0.185–0.56 and viscosity from 0.03–4.6 Pa s show that the dissolution rate is strongly dependent on the degree of superheating, silica activity and the viscosity of the solvent. Dissolution rates increase with increasing melt temperature and decreasing silica activity and viscosity. Quartz dissolution in melts with viscosity <0.59–1.9 Pa s and silica activity <0.47 is controlled by the rate of interface reaction as shown by the absence of steady state composition and silica saturation in the interface melts. Only in the most viscous melt with the highest silica activity is quartz dissolution controlled by the rate of diffusion in the melt and only after a long initiation time. The results of this study indicate that although a diffusion-based model may be applicable to dissolution in viscous magmas, a different approach that combines the interplay between the degree of undersaturation of the melt and its viscosity is required in very fluid melts.This revised version was published online September 2004 with a correction to Figure 8.  相似文献   

The high-pressure stability of chlorite and other hydrates in subduction mélanges: experiments in the system Cr<Subscript>2</Subscript>O<Subscript>3</Subscript>–MgO–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript>–H<Subscript>2</Subscript>O     

Patrizia?FumagalliEmail author  Stefano?Poli  Johannes?Fischer  Marco?Merlini  Mauro?Gemmi 《Contributions to Mineralogy and Petrology》2014,167(2):979

The solubility of chromium in chlorite as a function of pressure, temperature, and bulk composition was investigated in the system Cr₂O₃–MgO–Al₂O₃–SiO₂–H₂O, and its effect on phase relations evaluated. Three different compositions with X _Cr = Cr/(Cr + Al) = 0.075, 0.25, and 0.5 respectively, were investigated at 1.5–6.5 GPa, 650–900 °C. Cr-chlorite only occurs in the bulk composition with X _Cr = 0.075; otherwise, spinel and garnet are the major aluminous phases. In the experiments, Cr-chlorite coexists with enstatite up to 3.5 GPa, 800–850 °C, and with forsterite, pyrope, and spinel at higher pressure. At P > 5 GPa other hydrates occur: a Cr-bearing phase-HAPY (Mg_2.2Al_1.5Cr_0.1Si_1.1O₆(OH)₂) is stable in assemblage with pyrope, forsterite, and spinel; Mg-sursassite coexists at 6.0 GPa, 650 °C with forsterite and spinel and a new Cr-bearing phase, named 11.5 Å phase (Mg:Al:Si = 6.3:1.2:2.4) after the first diffraction peak observed in high-resolution X-ray diffraction pattern. Cr affects the stability of chlorite by shifting its breakdown reactions toward higher temperature, but Cr solubility at high pressure is reduced compared with the solubility observed in low-pressure occurrences in hydrothermal environments. Chromium partitions generally according to \(X_{\text{Cr}}^{\text{spinel}}\) ? \(X_{\text{Cr}}^{\text{opx}}\) > \(X_{\text{Cr}}^{\text{chlorite}}\) ≥ \(X_{\text{Cr}}^{\text{HAPY}}\) > \(X_{\text{Cr}}^{\text{garnet}}\). At 5 GPa, 750 °C (bulk with X _Cr = 0.075) equilibrium values are \(X_{\text{Cr}}^{\text{spinel}}\) = 0.27, \(X_{\text{Cr}}^{\text{chlorite}}\) = 0.08, \(X_{\text{Cr}}^{\text{garnet}}\) = 0.05; at 5.4 GPa, 720 °C \(X_{\text{Cr}}^{\text{spinel}}\) = 0.33, \(X_{\text{Cr}}^{\text{HAPY}}\) = 0.06, and \(X_{\text{Cr}}^{\text{garnet}}\) = 0.04; and at 3.5 GPa, 850 °C \(X_{\text{Cr}}^{\text{opx}}\) = 0.12 and \(X_{\text{Cr}}^{\text{chlorite}}\) = 0.07. Results on Cr–Al partitioning between spinel and garnet suggest that at low temperature the spinel- to garnet-peridotite transition has a negative slope of 0.5 GPa/100 °C. The formation of phase-HAPY, in assemblage with garnet and spinel, at pressures above chlorite breakdown, provides a viable mechanism to promote H₂O transport in metasomatized ultramafic mélanges of subduction channels.  相似文献   

Experimental study of the system Au–UO<Subscript>2</Subscript>–TiO<Subscript>2</Subscript>–aqueous fluid at 500°C and 1 kbar. 1. Synthesis of brannerite     

N. I. Kovalenko  N. I. Prisyagina  Yu. K. Kabalov  B. N. Ryzhenko 《Geochemistry International》2016,54(3):293-299

  相似文献   

Hydrosilicate liquids in the system rare-metal granite–Na<Subscript>2</Subscript>O–SiO<Subscript>2</Subscript>–H<Subscript>2</Subscript>O as accumulators of ore components at high pressure and temperature     

S. Z. Smirnov  V. G. Thomas  V. S. Kamenetsky  O. A. Kozmenko 《Petrology》2017,25(6):625-635

Experimental investigations in the system rare-metal granite–Na₂O–SiO₂–H₂O with the addition of aqueous solutions containing Rb, Cs, Sn, W, Mo, and Zn at 600°C and 1.5 kbar showed that the typical elements of rare-metal granites (Li, Rb, Cs, Be, Nb, and Ta) are preferentially concentrated in hydrosilicate liquids coexisting with aqueous fluid. The same behavior is characteristic of Zn and Sn, the minerals of which are usually formed under hydrothermal conditions. In contrast, Mo and W are weakly extracted by hydrosilicate liquids and almost equally distributed between them and aqueous fluids. Liquids similar to those described in this paper are formed during the final stages of magmatic crystallization in granite and granitepegmatite systems. The formation of hydrosilicate liquids in late magmatic and postmagmatic processes will be an important factor controlling the redistribution of metal components between residual magmatic melts, minerals, and aqueous fluids and, consequently, the mobility of these components in fluid-saturated magmatic systems enriched in rare metals.  相似文献   

Optical spectroscopic study of synthetic NaScSi<Subscript>2</Subscript>O<Subscript>6</Subscript>–CaNiSi<Subscript>2</Subscript>O<Subscript>6</Subscript> pyroxenes at normal and high pressures     

Michail N. Taran  Haruo Ohashi  Monika Koch-Müller 《Physics and Chemistry of Minerals》2008,35(3):117-127

Six synthetic NaScSi₂O₆–CaNiSi₂O₆ pyroxenes were studied by optical absorption spectroscopy. Five of them of intermediate (Na_1−x , Ca _x )(Sc_1−x , Ni _x )Si₂O₆ compositions show spectra typical of Ni²⁺ in octahedral coordination, more precise Ni²⁺ at the M1 site of the pyroxene structure. The common feature of all spectra is three broad absorption bands with maxima around 8,000, 13,000 and 24,000 cm⁻¹ assigned to ³ A _2g → ³ T _2g, ³ A _2g → ³ T _1g and →³ T _1g (³ P) electronic spin-allowed transitions of ^VINi²⁺. A weak narrow peak at ∼14,400 cm⁻¹ is assigned to the spin-forbidden ³ A _2g → ¹ T _2g (¹ D) transition of Ni²⁺. Under pressure the spin-allowed bands shift to higher energies and change in intensity. The octahedral compression modulus, calculated from the shift of the ³ A _2g → ³ T _2g band in the (Na_0.7Ca_0.3)(Sc_0.7Ni_0.3)Si₂O₆ pyroxene is evaluated as 85±20 GPa. The Racah parameter B of Ni²⁺(M1) is found gradually changing from ∼919 cm⁻¹ at ambient pressure to ∼890 cm⁻¹ at 6.18 GPa. The Ni end-member pyroxene [(Ca_0.93 Ni_0.07)NiSi₂O₆] has a spectrum different from all others. In addition to the above mentioned bands of Ni²⁺(M1) it displays several new relatively intense and broad extra bands, which were attributed to electronic transitions of Ni²⁺ at the M2 site. In difference to CaO₈ polyhedron geometry of an eightfold coordination, Ni²⁺(M2)O₈ polyhedra are assumed to be relatively large distorted octahedra. Due to different distortions and different compressibilities of the M1 and M2 sites the Ni²⁺(M1)- and Ni²⁺(M2)-bands display rather different pressure-induced behaviors, becoming more resolved in the high-pressure spectra than in that measured at atmospheric pressure. The octahedral compression modulus of Ni²⁺(M1) in this end-member pyroxene is evaluated as 150 ± 25 GPa, which is noticeably larger than in Ni_0.3 pyroxene. This is due to a smaller size and, thus, a stiffer character of Ni²⁺(M1)O₆ octahedron in the (Ca_0.93Ni_0.07)NiSi₂O₆ pyroxene compared to (Na_0.7Ca_0.3)(Sc_0.7Ni_0.3)Si₂O₆.

Monika Koch-MüllerEmail:

  相似文献   

La–SiO<Subscript>2</Subscript> and Yb–SiO<Subscript>2</Subscript> systematics in mid-ocean ridge magmas: implications for the origin of oceanic plagiogranite     

James Gerald Brophy 《Contributions to Mineralogy and Petrology》2009,158(1):99-111

Analytical expressions for the variation in D _La and D _Yb with increasing liquid SiO₂ for olivine, plagioclase, augite, hornblende, orthopyroxene, magnetite and ilmenite (Brophy in Contrib Mineral Petrol 2008, online first) have been combined with numerical models of hydrous partial melting, of mid-ocean ridge (MOR) cumulate gabbro melting, and fractional crystallization of slightly hydrous mid-ocean ridge basalt (MORB) magma to assess a melting versus fractionation origin for oceanic plagiogranite. For felsic magmas (>63 wt.% SiO₂) the modeling predicts the following. MOR cumulate gabbro melting should yield constant or decreasing La and constant Yb abundances with increasing liquid SiO₂. The overall abundances should be similar to those in associated mafic magmas. MORB fractional crystallization should yield steadily increasing La and Yb abundances with increasing SiO₂ with overall abundances significantly higher than those in associated mafic magmas. Application to natural occurrences of oceanic plagiogranite indicate that both MOR cumulate gabbro melting and MORB fractionation are responsible. Application of the model results to Icelandic rhyolites strongly support a fractional crystallization rather than a crustal melting origin.  相似文献   

Evaporative evolution of a Na–Cl–NO<Subscript>3</Subscript>–K–Ca–SO<Subscript>4</Subscript>–Mg–Si brine at 95 °C: Experiments and modeling relevant to Yucca Mountain,Nevada     

Maureen?AlaiEmail author  Mark?Sutton  Susan?Carroll 《Geochemical transactions》2005,6(2):31

A synthetic Topopah Spring Tuff water representative of one type of pore water at Yucca Mountain, NV was evaporated at 95°C in a series of experiments to determine the geochemical controls for brines that may form on, and possibly impact upon the long-term integrity of waste containers and drip shields at the designated high-level, nuclear-waste repository. Solution chemistry, condensed vapor chemistry, and precipitate mineralogy were used to identify important chemical divides and to validate geochemical calculations of evaporating water chemistry using a high temperature Pitzer thermodynamic database. The water evolved toward a complex "sulfate type" brine that contained about 45 mol % Na, 40 mol % Cl, 9 mol % NO₃, 5 mol % K, and less than 1 mol % each of SO₄, Ca, Mg, ∑CO₂(aq), F, and Si. All measured ions in the condensed vapor phase were below detection limits. The mineral precipitates identified were halite, anhydrite, bassanite, niter, and nitratine. Trends in the solution composition and identification of CaSO₄ solids suggest that fluorite, carbonate, sulfate, and magnesium-silicate precipitation control the aqueous solution composition of sulfate type waters by removing fluoride, calcium, and magnesium during the early stages of evaporation. In most cases, the high temperature Pitzer database, used by EQ3/6 geochemical code, sufficiently predicts water composition and mineral precipitation during evaporation. Predicted solution compositions are generally within a factor of 2 of the experimental values. The model predicts that sepiolite, bassanite, amorphous silica, calcite, halite, and brucite are the solubility controlling mineral phases.  相似文献   

Experimental Study of the SiO<Subscript>2</Subscript>–H<Subscript>2</Subscript>O–KF–KCl–NaF System at 700–800°C and 1–2 kbar Based on Synthetic Fluid Inclusions in Quartz     

Z. A. Kotelnikova  A. R. Kotelnikov 《Geology of Ore Deposits》2018,60(5):449-460

The phase state of the fluid in the H₂O–KF ± KCl ± NaF system is studied in the presence of quartz for an experimental assay of the mutual influence of various salts of the fluid-forming mixture on heterogeneous fluid equilibria. The fluid inclusions were synthesized in quartz by the fracture healing method from solutions with KF + KCl and KF + NaF mixtures at 1 or 2 kbar and 700, 750, or 800°C. The results of the fluid inclusion study indicate a heterogeneous state of the fluid and variation in the fluid composition during experiments as a result of its interaction with quartz. The increase in temperature and pressure, as well as variation in the proportions of the salt contents in the fluid-forming mixture, changed the course of chemical reactions. After all the experiments, a glassy phase was observed in some types of inclusions. It is known that aqueous KF or KCl solutions, the solubility of which increases during heating, are characterized by phase equilibria of systems of the first type (Valyashko, 1990), when liquid and vapor are equilibrated for a heterogeneous state of the fluid. In this case, some inclusions should homogenize to vapor. However, no similar inclusions were observed in contrast to denser fluid phases (liquids), which are typical of the upper heterogeneous area of systems of the second (P–Q) type. Some inclusions host solid phases, the solubility of which decreases as the temperature increases. The results of experiments in the presence of KF + NaF solutions showed that the amount of inclusions of heterogeneous entrapment increases at higher temperatures simultaneously with a decrease in the H₂O content of the glassy phase.  相似文献   

Characterization,dissolution and solubility of the hydroxypyromorphite–hydroxyapatite solid solution [(Pb<Subscript>x</Subscript>Ca<Subscript>1−x</Subscript>)<Subscript>5</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>OH] at 25 °C and pH 2–9     

Yinian Zhu  Bin Huang  Zongqiang Zhu  Huili Liu  Yanhua Huang  Xin Zhao  Meina Liang 《Geochemical transactions》2016,17(1):2

  相似文献   

Effect of KCl on melting in the Mg<Subscript>2</Subscript>SiO<Subscript>4</Subscript>–MgSiO<Subscript>3</Subscript>–H<Subscript>2</Subscript>O system at 5 GPa     

Linglin Chu  Andreas Enggist  Robert W. Luth 《Contributions to Mineralogy and Petrology》2011,162(3):565-571

To examine the effect of KCl-bearing fluids on the melting behavior of the Earth’s mantle, we conducted experiments in the Mg₂SiO₄–MgSiO₃–H₂O and Mg₂SiO₄–MgSiO₃–KCl–H₂O systems at 5 GPa. In the Mg₂SiO₄–MgSiO₃–H₂O system, the temperature of the fluid-saturated solidus is bracketed between 1,200–1,250°C, and both forsterite and enstatite coexist with the liquid under supersolidus conditions. In the Mg₂SiO₄–MgSiO₃–KCl–H₂O systems with molar Cl/(Cl + H₂O) ratios of 0.2, 0.4, and 0.6, the temperatures of the fluid-saturated solidus are bracketed between 1,400–1,450°C, 1,550–1,600°C, and 1,600–1,650°C, respectively, and only forsterite coexists with liquid under supersolidus conditions. This increase in the temperature of the solidus demonstrates the significant effect of KCl on reducing the activity of H₂O in the fluid in the Mg₂SiO₄–MgSiO₃–H₂O system. The change in the melting residues indicates that the incongruent melting of enstatite (enstatite = forsterite + silica-rich melt) could extend to pressures above 5 GPa in KCl-bearing systems, in contrast to the behavior in the KCl-free system.  相似文献   

Phase equilibria in the MgO–SiO<Subscript>2</Subscript>–ZrO<Subscript>2</Subscript> system     

V. M. Ryzhkov  V. N. Anfilogov  I. A. Blinov  A. A. Krasnobaev  P. M. Valizer 《Doklady Earth Sciences》2016,469(2):824-827

The results of study of phase equilibria in the MgO–SiO₂–ZrO₂ system at 1450–1550°C are reported. The studied system contains two eutectic points and six fields: (I) MgSiO₃ + SiO₂; (II) MgSiO₃ + ZrO₂; (III) ZrSiO₄ + SiO₂; (IV) MgSiO₃ + Mg₂SiO₄; (V) ZrO₂ + MgO; (VI) ZrSiO₄ + ZrO₂. The presence of fields (II) and (III) on the diagram shows that zircon in equilibrium with olivine and pyroxene crystallizes at very low concentrations of ZrO₂ in the system. This provides a solution for one of the most important problems in zirconology of dunites: the probability of the formation and preservation of zircon in the course of the formation and evolution of dunite.  相似文献   

Elastic and thermoelastic properties of synthetic Ca<Subscript>2</Subscript>MgSi<Subscript>2</Subscript>O<Subscript>7</Subscript> (åkermanite) and Ca<Subscript>2</Subscript>ZnSi<Subscript>2</Subscript>O<Subscript>7</Subscript> (hardystonite)     

S.?HaussühlEmail author  J.?Liebertz 《Physics and Chemistry of Minerals》2004,31(8):565-567

Elastic and thermoelastic constants of large single crystals of Ca₂MgSi₂O₇ and Ca₂ZnSi₂O₇ have been derived from ultrasonic resonance frequencies of plane-parallel plates and their shift upon variation of temperature, respectively. In addition, coefficients of thermal expansion and dielectric constants were determined. Both species possess quite similar properties. As observed in other isotypic magnesium and zinc compounds, the mean elastic stiffness and the deviation from the Cauchy relations are significantly larger in the zinc compound, due to a covalent contribution of the Zn–O bond. Positive thermoelastic constants T₄₄ and T₆₆ in Ca₂MgSi₂O₇ allow temperature-independent ultrasonic generators and oscillators to be manufactured.  相似文献   

Long-term monitoring and interpretation of flares in the H<Subscript>2</Subscript>O maser emission of IRAS 16293–2422     

P. Colom  E. E. Lekht  M. I. Pashchenko  G. M. Rudnitskii  A. M. Tolmachev 《Astronomy Reports》2016,60(8):730-743

The results of a study of the H₂O and OH maser emission from the cool IR source IRAS 16293?2422 are presented. The observations analyzed were obtained in H₂O lines with the 22-m telescope of the Pushchino Radio Astronomy Observatory during 1999–2015 and in OH lines with the Nanc¸ ay radio telescope (France). A large number of very strong flares of the H₂O maser were detected, reaching fluxes of tens of thousands of Jansky. Individual features can form organized structures resembling chains ～2 AU in length with a radial-velocity gradient along them. The observed drift of the H₂O emission (2003–2004) in space and velocity (from 4.3 to 5.3 km/s) is not due solely to proper motion of the features. The other origin of the drift is a drift of the emission maximum during a flare as the shock consecutively excites spatially separated features in the structure in the form of a chain. The OH-line observations at 18 cm show that the emission remains unpolarized and thermal, with a line width of 0.7 km/s, which corresponds to a cloud temperature of ～30 K.  相似文献   

Structural characterization of high-pressure C–Na<Subscript>2</Subscript>Si<Subscript>2</Subscript>O<Subscript>5</Subscript> by single-crystal diffraction and <Superscript>29</Superscript>Si MAS NMR     

S. Rakić  V. Kahlenberg  C. Weidenthaler  B. Zibrowius 《Physics and Chemistry of Minerals》2002,29(7):477-484

Single crystals of C–Na₂Si₂O₅ have been synthesized from the hydrothermal recrystallization of a glass. The title compound is monoclinic, space group P2₁/c with Z= 8 and unit-cell parameters a= 4.8521 (4)Å, b=23.9793(16)Å, c=8.1410(6)Å, β=90.15(1)° and V=947.2(2)ų. The structure has been determined by direct methods and belongs to the group of phyllosilicates. It is based on layers of tetrahedra with elliptically six-membered rings in chair conformation. The sequence of directedness within a single ring is UDUDUD. The sheets are parallel to (010) with linking sodium cations in five- and sixfold coordination. Concerning the shape and the conformation of the rings, C–Na₂Si₂O₅ is closely related to β-Na₂Si₂O₅. However, both structures differ in the stacking sequences of the layers. A possible explanation for the frequently observed polysynthetic twinning of phase C is presented. In the ²⁹Si MAS-NMR spectrum of C–Na₂Si₂O₅ four well-resolved lines of equal intensity are observed at ?86.0, ?86.3, ?87.4, and ?88.2?ppm. The narrow range of isotropic chemical shifts reflects the great similarity of the environments of the different Si sites. This lack of pronounced differences in geometry renders a reliable assignment of the resonance lines to the individual sites on the basis of known empiric correlations and geometrical features impossible.  相似文献