共查询到20条相似文献，搜索用时 15 毫秒
1.
Comparison of continuous and discontinuous constitutive models to simulate concrete behaviour under mixed‐mode failure conditions 
下载免费PDF全文
下载免费PDF全文 The paper presents detailed FE simulation results of concrete elements under mixed‐mode failure conditions according to the so‐called shear‐tension test by Nooru‐Mohamed, characterized by curved cracks. A continuous and discontinuous numerical two‐dimensional approach was used. In order to describe the concrete's behaviour within continuum mechanics, two different constitutive models were used. First, an elasto‐plastic model with isotropic hardening and softening was assumed. In a compression regime, a Drucker–Prager criterion with a non‐associated flow rule was used. In turn, in a tensile regime, a Rankine criterion with an associated flow rule was adopted. Second, an isotropic damage constitutive model was applied with a single scalar damage parameter and different definitions of the equivalent strain. Both constitutive laws were enriched by a characteristic length of micro‐structure to capture properly strain localization. As an alternative approach, the extended finite element method was used. Our results were compared with the experimental ones and with results of other FE simulations reported in the literature. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
2.
In this paper, the seismic response of ‘infinitely’ long slopes is numerically analysed via the formulation of a 1D analytical/numerical model, in which the soil mechanical behaviour is assumed to be elasto‐perfectly viscoplastic and simple shear (SS) kinematical constraints are imposed. In order to simplify the problem, a theoretically based procedure to set up a fully 1D shear constitutive model is defined, within which the mechanical response of a multiaxial relationship is condensed. The use of a 1D shear constitutive model is aimed at reducing the number of unknowns and, therefore, the computational costs. In particular, the case of the Mohr–Coulomb yield criterion is considered, while an enhanced Taylor–Galerkin finite element algorithm is employed to simulate the seismic wave propagation within the soil stratum. The proposed ‘condensation’/calibration procedure captures both the ‘pseudo’‐hardening pre‐failure behaviour and the influence of dilation on the occurrence of strain‐localization, which characterize, under SS conditions, the static response of virgin perfectly plastic soils. The effectiveness of the conceived method is shown with reference to freshly deposited deposits, while, in the case of highly overconsolidated strata, some difficulties arise because of the brittle behaviour induced both by unloading and non‐associativeness. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
3.
The governing equations for an elasto‐plastic constitutive model for frictional materials such as soil, rock, and concrete are presented, and the incremental form is indicated in preparation for implementation of the model in a user‐defined module for finite element calculations. This isotropic, work‐hardening and ‐softening model employs a single yield surface, it incorporates non‐associated plastic flow, and its capability of capturing the behaviour of different types of frictional materials under various three‐dimensional conditions has been demonstrated by comparison with measured behaviour, as presented in the literature. The incrementalization procedure is indicated and the resulting equations for the single hardening model are presented together with parameters for a dense sand. Following the implementation of the model, these parameters are used for evaluation of different integration schemes as presented in a companion paper by Jakobsen and Lade (Int. J. Numer. Anal. Meth. Geomech. 2002; 26 :661). Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
4.
Akira Murakami Takayuki Shuku Shin‐ichi Nishimura Kazunori Fujisawa Kazuyuki Nakamura 《国际地质力学数值与分析法杂志》2013,37(11):1642-1669
A computational method, incorporating the finite element model (FEM) into data assimilation using the particle filter, is presented for identifying elasto‐plastic material properties based on sequential measurements under the known changing traction boundary conditions to overcome some difficulties in identifying the parameters for elasto‐plastic problems from which the existing inverse analysis strategies have suffered. A soil–water coupled problem, which uses the elasto‐plastic constitutive model, is dealt with as the geotechnical application. Measured data on the settlement and the pore pressure are obtained from a synthetic FEM computation as the forward problem under the known parameters to be identified for both the element tests and the ground behavior during the embankment construction sequence. Parameter identification for elasto‐plastic problems, such as soil behavior, should be made by considering the measurements of deformation and/or pore pressure step by step from the initial stage of construction and throughout the deformation history under the changing traction boundary conditions because of the embankment or the excavation because the ground behavior is highly dependent on the loading history. Thus, it appears that sequential data assimilation techniques, such as the particle filter, are the preferable tools that can provide estimates of the state variables, that is, deformation, pore pressure, and unknown parameters, for the constitutive model in geotechnical practice. The present paper discusses the priority of the particle filter in its application to initial/boundary value problems for elasto‐plastic materials and demonstrates a couple of numerical examples. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
5.
On the basis of fundamental constitutive laws such as elasticity, perfect plasticity, and pure viscosity, many elasto‐viscoplastic constitutive relations have been developed since the 1970s through phenomenological approaches. In addition, a few more recent micro‐mechanical models based on multi‐scale approaches are now able to describe the main macroscopic features of the mechanical behaviour of granular media. The purpose of this paper is to compare a phenomenological constitutive relation and a micro‐mechanical model with respect to a basic issue regularly raised about granular assemblies: the incrementally non‐linear character of their behaviour. It is shown that both phenomenological and micro‐mechanical models exhibit an incremental non‐linearity. In addition, the multi‐scale approach reveals that the macroscopic incremental non‐linearity could stem from the change in the regime of local contacts between particles (from plastic regime to elastic regime) in terms of the incremental macroscopic loading direction. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
6.
This paper presents a constitutive model for time‐dependent behaviour of granular material. The model consists of 2 parts representing the inviscid and viscous behaviour of granular materials. The inviscid part is a rate‐independent hypoplastic constitutive model. The viscous part is represented by a rheological model, which contains a high‐order term denoting the strain acceleration. The proposed model is validated by simulating some element tests on granular soils. Our model is able to model not only the non‐isotach behaviour but also the 3 creep stages, namely, primary, secondary, and tertiary creep, in a unified way. 相似文献
7.
Wheeler, Sharma and Buisson proposed an elasto‐plastic constitutive model for unsaturated soils that couples the mechanical and water retention behaviours. The model was formulated for isotropic stress states and adopts the mean Bishop's stress and modified suction as stress state variables. This paper deals with the extension of this constitutive model to general three‐dimensional stress conditions, proposing the generalized stress–strain relationships required for the numerical integration of the constitutive model. A characteristic of the original model is the consideration of a number of elasto‐plastic mechanisms to describe the complex behaviour of unsaturated soils. This work presents the three‐dimensional formulation of these coupled irreversible mechanisms in a generalized way including anisotropic loading. The paper also compares the results from the model with published experiments performed under different loading conditions. The response of the model is very satisfactory in terms of both mechanical and water retention behaviours. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
8.
As is well known, granular soils under cyclic loading dissipate a large amount of energy and accumulate large irreversible strains. Usually, with time, this second effect reduces and the accumulation rate decreases with the number of cycles until obtaining a sort of ideal stationary cyclic state at which ratcheting disappears. In this paper, only this ideal state is taken into consideration and simulated by means of a multi‐mechanism constitutive model for plastic adaptation. For this purpose, the concept of cycle is discussed, many different categories of cyclic stress/strain paths are considered and some theoretical issues concerning both the flow and the strain‐hardening rules are tackled. Even though the paper focuses on soil behaviour, the conclusions can be extended to all materials exhibiting ratcheting due to volumetric behaviour.Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
9.
Jérôme Duriez Félix Darve Frédéric‐Victor Donzé François Nicot 《国际地质力学数值与分析法杂志》2013,37(15):2539-2562
For prediction of rockfalls, the failure of rock joints is studied. Considering these failures as constitutive instabilities, a second‐order work criterion is used because it explains all divergence instabilities (flutter instabilities are excluded). The bifurcation domain and the loading directions of instabilities, which fulfill the criterion, are determined for any piecewise linear constitutive relation. The instability of rock joints appears to be ruled by coupling features of the behavior (e.g., dilatancy). Depending on the loading parameters, instabilities can lead to failure, even before the plastic limit criterion. Results for two given constitutive relations illustrate the approach. Some given loading paths are especially considered. Constant volume (undrained) shear and τ‐constant paths are stable or not depending on the link between the deviatoric stress and strain along undrained paths, as found for soils. Some unstable loading paths are illustrated. Along these paths, failure before the plastic limit criterion is possible. The corresponding failure rules are determined. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
10.
The bifurcation and instability conditions in geomechanics are closely related to the elasto‐plastic behaviour. In this paper the potential of a multimechanism elasto‐plastic model to predict various modes of failure is examined. First, a brief overview for the essential aspects of the constitutive model and the development of the elasto‐plastic constitutive matrix for this model are presented. Then, numerical simulations of different drained and undrained paths in the axisymmetric and plane‐strain conditions for the Hostun sand are illustrated. These examples confirm the capacity of the model to reproduce instability and strain localization phenomena. The obtained response is in agreement with experimental observations, theoretical developments and numerical analyses existing in the literature. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
11.
A new phenomenological macroscopic constitutive model for the numerical simulation of quasi‐brittle fracture and ductile concrete behavior, under general triaxial stress conditions, is presented. The model is particularly addressed to simulate a wide range of confinement stress states, as also, to capture the strong influence of the mean stress value in the concrete failure mechanisms. The model is based on a two‐surface damage‐plastic formulation. The mechanical behavior in different domains of the stress space is separately described by means of a quasi‐brittle or ductile material response:
12.
In this article we present closed‐form solutions for the undrained variations in stress, pore pressure, deformation and displacement inside hollow cylinders and hollow spheres subjected to uniform mechanical pressure instantaneously applied to their external and internal boundary surfaces. The material is assumed to be a saturated porous medium obeying a Mohr–Coulomb model failure criterion, exhibiting dilatant plastic deformation according to a non‐associated flow rule which accounts for isotropically strain hardening or softening. The instantaneous response of a porous medium submitted to an instantaneous loading is undrained, i.e. without any fluid mass exchange. The short‐term equilibrium problem to be solved is now formally identical to a problem of elastoplasticity where the constitutive equations involve the undrained elastic moduli and particular equivalent plastic parameters. The response of the model is presented (i) for extension and compression undrained triaxial tests, and (ii) for unloading problems of hollow cylinders and spheres through the use of appropriately developed closed‐form solutions. Numerical results are presented for a plastic clay stone with strain hardening and an argilite with strain softening. The effects of plastic dilation, of the strain softening law and also of geometry of the cavity on the behaviour of the porous medium have been underlined. Analytical solutions provide valuable benchmarks enabling various numerical methods in undrained conditions with a finite boundary to be verified. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
13.
14.
This paper presents an elasto‐plastic model for non‐linear analyses of cement‐treated sand. Various laboratory tests were systematically carried out to investigate the pre‐peak and post‐peak behaviours of a cement‐treated sand. On the basis of these experimental results, the new model was built within the framework of a relatively simple elasto‐plastic theory. Two failure criteria are employed to express tensile and shear failure characteristics observed in the experimental results of the cement‐treated sand. The proposed model can describe strain‐hardening and strain‐softening responses under both failure modes. In the strain‐softening rules, the smeared crack concept is used, and a characteristic length is considered to avoid the issue of mesh‐size dependency. Since the failure criterion and strain‐hardening/softening rules are based on the experimental evidences, the model is relatively easy to understand and the parameters used in the model have clear physical meaning. The proposed model was applied to simulate the behaviour of cement‐treated sand in various laboratory tests, allowing for a reasonable comprehensive evaluation. It was demonstrated that the proposed model is suitable for describing both the tensile and shear failure behaviours of cement‐treated sand. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
15.
Rock joint constitutive modelling is discussed through two new rock joint constitutive relations and a discrete numerical model. Regarding the constitutive relations, we emphasise the number of ‘tensorial zones’, that is, domains of constitutive incremental linearity; they involve four zones for the first (called ‘quadrilinear’) and an infinite number for the second one (called ‘incrementally nonlinear’). Using these formulations, a large class of loading paths can be considered. Hardening through shearing and relations between the normal and tangential directions of the joint (e.g., dilatancy) can be described. Their predictive abilities are checked. Plastic features are included even if the relations are defined outside the elasto‐plastic formalism. These relations obey, hence, the physical evidence as the plastic limit criterion and flow rule. The flow rule is nonassociated, and the corresponding link with the nonsymmetry of the constitutive matrix is examined. Comparisons between the two relations and the discrete numerical model, that is, a direct numerical simulation, which is fundamentally different, also are discussed within the context of infilled rock joints. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
16.
This paper aims to evaluate the performance of several recent constitutive models in simulating the thermo‐mechanical behaviour of saturated clays. A classic thermo‐mechanical test on natural Boom Clay, commonly used in constitutive modelling, was first clarified. Different methods commonly used to measure volumetric strain in drained heating tests were then discussed. Model evaluation was performed in terms of thermodynamic and elasto‐plastic requirements. The capability of the models to capture the observed behaviour was assessed on the basis of the experimental evidence. It was shown that all the models provide reasonable predictions of the thermo‐mechanical behaviour of saturated clays. However, each constitutive model has its own limitations or unclear points from the theoretical point of view. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
17.
A theoretical formulation and a numerical solution method are proposed for the problem of the time dependent consolidation of an elasto-plastic soil subject to finite deformations. The soil is assumed to be a two-phase material with a skeleton which may yield according to a general yield criterion with plastic flow governed by a general flow law, and whose pore fluid flows according to Darcy's Law. Governing equations are cast in a rate form and constitutive laws are expressed in a frame indifferent manner. The method of analysis is illustrated by several examples of practical interest for both a soil with an elastic skeleton and a soil with an elasto-plastic skeleton which obeys a Morh–Coulomb yield criterion and a non-associated flow law. 相似文献
18.
Advanced material constitutive models are used to describe complex soil behaviour. These models are often used in the solution of boundary value problems under general loading conditions. Users and developers of constitutive models need to methodically investigate the represented soil response under a wide range of loading conditions. This paper presents a systematic procedure for probing constitutive models. A general incremental strain probe, 6D hyperspherical strain probe (HSP), is introduced to examine rate‐independent model response under all possible strain loading conditions. Two special cases of HSP, the true triaxial strain probe (TTSP) and the plane‐strain strain probe (PSSP), are used to generate 3‐D objects that represent model stress response to probing. The TTSP, PSSP and general HSP procedures are demonstrated using elasto‐plastic models. The objects resulting from the probing procedure readily highlight important model characteristics including anisotropy, yielding, hardening, softening and failure. The PSSP procedure is applied to a Neural Network (NN) based constitutive model. It shows that this probing is especially useful in understanding NN constitutive models, which do not contain explicit functions for yield surface, hardening, or anisotropy. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
19.
Hossein Masoumi Kurt J. Douglas Adrian R. Russell 《Rock Mechanics and Rock Engineering》2016,49(1):47-62
A new constitutive model for intact rock is presented recognising that rock strength, stiffness and stress–strain behaviour are affected by the size of the rock being subjected to loading. The model is formulated using bounding surface plasticity theory. It is validated against a new and extensive set of unconfined compression and triaxial compression test results for Gosford sandstone. The samples tested had diameters ranging from 19 to 145 mm and length-to-diameter ratios of 2. The model captures the continuous nonlinear stress–strain behaviour from initial loading, through peak strength to large shear strains, including transition from brittle to ductile behaviour. The size dependency was accounted for through a unified size effect law applied to the unconfined compressive strength—a key model input parameter. The unconfined compressive strength increases with sample size before peaking and then decreasing with further increasing sample size. Inside the constitutive model two hardening laws act simultaneously, each driven by plastic shear strains. The elasticity is stress level dependent. Simple linear loading and bounding surfaces are adopted, defined using the Mohr–Coulomb criterion, along with a non-associated flow rule. The model simulates well the stress–strain behaviour of Gosford sandstone at confining pressures ranging from 0 to 30 MPa for the variety of sample sizes considered. 相似文献
20.
Monitoring of the progressive convergence of a tunnel shows that deformations occurring in the soil surrounding a tunnel exhibit a strong evolution with time. This time‐dependent behaviour can be linked to three essential factors: the distance from the point of interest to the working face over time, the distance of unsupported tunnel to the working face and the viscous properties of the soil. The objective of this paper is to propose a constitutive model of the time‐dependent behaviour of soil which has been developed within the framework of elastoplasticity–viscoplasticity and critical state soil mechanics. The consideration of viscoplastic characteristic sets the current model apart from the CJS (Cambou, Jafari and Sidoroff) model as the basic elastoplastic model, and introduces an additional viscous mechanism. The evolution of the viscous yield surface is governed by a particular hardening called ‘viscous hardening’ with a bounding surface. The proposed constitutive model has been applied in the analysis of tunnelling. Two kinds of numerical calculations have been used in the analysis, axisymmetric analysis and plane strain analysis. Monitoring of the progressive convergence of a tunnel conducted in the railway tunnel of Tartaiguille (France), has been used to describe the calculation procedure proposed and the capability of the model. The finite difference software, fast Lagrangian analysis of continua (FLAC), has been used for the numerical simulation of the problems. The comparison of results shows that the observed deformations could have been reasonably predicted by using the constitutive model and calculation strategy proposed. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献