共查询到20条相似文献，搜索用时 62 毫秒
1.
湘南宝山铅锌矿床硫、铅、碳、氧同位素特征及成矿物质来源 总被引：3，自引：1，他引：2
宝山铅锌矿床是湘南地区代表性矿床之一。宝山铅锌矿床的成矿作用与156~158 Ma的宝山花岗闪长斑岩密切相关。花岗闪长斑岩主要由古老地壳部分熔融而成。为确定成矿物质来源,文章系统研究了宝山铅锌矿床的硫、铅、碳、氧同位素组成特征。矿床中硫化物黄铁矿、闪锌矿、方铅矿的δ34S值呈狭窄的塔式分布,变化在-2.17‰~6.46‰之间,平均值为3.13‰。δ34S值总体表现为δ34S黄铁矿δ34S闪锌矿δ34S方铅矿,表明硫同位素分馏基本达到了平衡。矿石、花岗闪长斑岩和赋矿地层硫同位素对比研究表明,矿石中的硫主要由岩浆分异演化而来,岩浆中的硫主要来自古老地壳。矿石206Pb/204Pb、207Pb/204Pb和208Pb/204Pb比值分别为18.188~18.844、15.661~15.843和38.562~39.912,赋矿地层206Pb/204Pb、207Pb/204Pb和208Pb/204Pb比值分别为18.268~19.166、15.620~5.721和38.364~39.952。矿石铅同位素组成比地层中的更富放射性成因铅,矿石中部分铅来自宝山花岗闪长质岩浆,在成矿流体运移过程中有部分地层铅参与了成矿,岩浆中的铅主要来自古老地壳。热液方解石的碳、氧同位素组成介于岩浆和赋矿碳酸盐岩的碳、氧同位素之间,主要是由于岩浆流体和碳酸盐岩不同比例的水岩反应所致,测水组有机碳的加入造成了部分热液方解石δ13CPDB值偏低。 相似文献
2.
新疆西天山喇嘛萨依铜矿床地质和C、O、S、Pb同位素地球化学 总被引：1，自引：0，他引：1
喇嘛萨依铜矿是新疆西天山赛里木微地块内的一处典型铜矿床,关于其成因类型尚存争议。总结了该铜矿床的地质特征,测试围岩、脉石碳酸盐的C、O同位素和硫化物的S、Pb同位素组成,探讨其成因类型。研究表明,喇嘛萨依铜矿床具有后生矿床特征,发育矽卡岩化蚀变,脉石方解石的δ13C值变化范围为-1.04‰~-0.87‰,低于围岩灰岩的δ13C值(变化范围为3.51‰~5.47‰),δ18O值变化范围为9.33‰~9.61‰,明显低于正常的海相碳酸盐岩的O同位素(δ18O=20‰~26‰),C、O同位素组成反映喇嘛萨依铜矿成矿晚阶段流体来自岩浆水和地下水的混合水;硫化物的δ34S值主要变化范围为3.75‰~8.64‰,与区域上海西期斑岩的硫同位素组成(如达巴特斑岩铜钼矿床硫化物的δ34S变化范围为4.9‰~7.9‰)接近,反映硫来源于斑岩;黄铜矿的铅同位素为206Pb/204Pb=18.264~19.544,207Pb/204Pb=15.575~15.656,208Pb/204Pb=38.103~38.705,具有富含放射成因铅、两阶段异常铅特征,与区域上海西期斑岩(达巴特流纹斑岩)的铅同位素组成特征相似,反映成矿金属物质部分来源于斑岩。通过综合分析认为,喇嘛萨依铜矿是与斑岩有关的矽卡岩型矿床。 相似文献
3.
河南省老里湾银铅锌矿床位于华北克拉通南缘华熊地块崤山断隆区,是近年来在崤山东部浅覆盖区新发现的一处大型矿床。老里湾矿床的矿体受断裂构造控制,主要呈浸染状、细脉浸染状和脉状赋存于早白垩世花岗斑岩体内的NW向和NNW向断裂破碎带中,亦有少量的矿体产于中元古界熊耳群火山岩内的断裂中。根据矿物共生组合、矿石组构及脉体穿插关系,将老里湾银铅锌矿床的成矿过程划分为3个成矿阶段,即:(1)绢云母+闪锌矿+方铅矿+黄铁矿阶段(早阶段);(2)重晶石+闪锌矿+方铅矿+银矿物±碳酸盐±石英阶段(中阶段);(3)闪锌矿+方铅矿+银矿物阶段(晚阶段)。文章对花岗斑岩的石英斑晶和热液阶段重晶石流体包裹体的研究表明,石英斑晶中主要发育含子矿物多相包裹体(S型)、富液两相水溶液包裹体(WL型)及少量的富气两相水溶液包裹体(WG型);重晶石中主要发育WL型包裹体。花岗斑岩的石英斑晶中包裹体完全均一温度介于338~586℃,平均494℃;盐度w(Na Cleq)介于11.0%~70.2%,密度为0.87~1.27 g/cm~3,属于高温、高盐度的H_2O-Na Cl体系。成矿中阶段的重晶石中包裹体均一温度为128~401℃,平均254℃;盐度w(Na Cleq)为1.6%~8.1%,密度0.59~0.95g/cm~3,属于中温、低盐度的H_2O-Na Cl体系。成矿中阶段重晶石中流体的δ~(18)O水值介于5.9‰~8.4‰,δDV-SMOW值介于-89.7‰~-65.5‰,表明成矿流体为岩浆水。重晶石的δ~(13)CPDB变化于-22.9‰~-12.5‰,具有花岗质岩浆演化形成的流体特征。矿石金属硫化物的δ~(34)S值介于1.9‰~5.9‰,平均3.5‰,具有深源硫的特征;成矿阶段重晶石的δ~(34)S值介于9.2‰~11.1‰,平均10.2‰。重晶石的δ34S值大于硫化物的δ~(34)S值,是同位素分馏造成的。矿床金属硫化物的Pb同位素组成较为集中,~(206)Pb/~(204)Pb介于17.262~17.430;~(207)Pb/~(204)Pb介于15.444~15.501;~(208)Pb/~(204)Pb介于37.774~38.050。S-Pb同位素组成表明老里湾矿床的成矿物质主要来自矿区内的早白垩世花岗质岩浆。崤山东部发育斑岩型钼铅锌银成矿系统,老里湾银铅锌矿床属于该成矿系统的浅部脉状矿化端员。初始中低盐度流体的降温是老里湾银铅锌矿床矿质沉淀的主要机制。 相似文献
4.
冰洞山铅锌矿床是扬子地块北缘铅锌找矿的新突破。矿床主要形成于基底隆起部位的震旦系陡山沱组,矿体呈层状、似层状产于陡山沱组第四段白云岩角砾岩中,围岩蚀变很弱。矿石主要呈中粗粒晶质结构,充填于白云岩角砾岩间。金属矿物主要为闪锌矿、方铅矿等。与矿石共生的方解石流体包裹体分析表明流体均一温度为95~175℃,密度为0.897~1.117 g/cm3,估算成矿流体压力为25.4~32.5 MPa,计算相应的深度为1.24~1.43 km。矿石中硫化物的δ(34S)为13.03‰~33.72‰,其δ(34S)的顺序为:黄铁矿闪锌矿方铅矿;硫酸盐的δ(34S)为32.07‰~47.22‰,S来源于海相硫酸盐的还原。矿石硫化物的铅同位素组成为:N(206Pb)/N(204Pb)=17.660~18.093,N(207Pb)/N(204Pb)=15.457~15.694,N(208Pb)/N(204Pb)=37.444~38.288,成矿金属来源于震旦系-寒武系。矿石伴生碳酸盐矿物的δ(13CPDB)为-1.22‰~-0.31‰,成矿流体中的CO2为震旦系碳酸盐岩的溶解成因。冰洞山铅锌矿床成矿流体可能为起源于盖层沉积的中低温盆地卤水,伴随穹隆构造过程中,成矿流体向陡山沱组白云岩角砾岩运移并发生热液充填成矿,在成因上为MVT型铅锌矿床。 相似文献
5.
宝山铜铅锌多金属矿床是湖南重要的铅锌生产基地。矿床内矽卡岩型铜(钼)矿化受侏罗纪花岗闪长斑岩的控制,而主要的铅锌矿体则产于远离岩体的碳酸盐地层中,且缺乏可靠的矿化年龄限制。为了查明宝山铅锌矿体与花岗闪长斑岩之间的成因关系,文章对宝山花岗岩类中浸染状黄铁矿的硫同位素和钾长石的铅同位素,以及铅锌矿石萤石脉石的流体包裹体进行了测试和研究,并与前人报道的铅锌硫化物矿石的硫、铅同位素进行了对比,尝试为宝山铅锌矿化的物质来源及成因提供依据。研究表明,花岗闪长斑岩中浸染状黄铁矿的δ34S值为+1.5‰~+3.5‰,与铅锌矿石硫化物(方铅矿、闪锌矿及黄铁矿)相一致;同时,花岗岩类中钾长石的铅同位素组成206Pb/204Pb、207Pb/204Pb和208Pb/204Pb分别为18.4789~18.7668、15.6835~15.7220和38.7903~39.1035,具有壳源的特征,且与铅锌矿石硫化物的铅同位素分布范围相吻合。宝山矿床的硫、铅同位素特征表明,花岗闪长斑岩应是铅锌矿化的主要硫源及金属来源。宝山矿床铅锌矿石萤石中的流体包裹体具有低温(130~150℃)、低盐度(8%)的特征,可能是岩浆热液演化到晚期的产物。结合已有的有关资料加以对比和分析,研究认为,宝山铅锌矿床的成矿物质应来源于花岗闪长岩的岩浆期后热液,在热液演化晚期迁移到远端地层中沉淀,形成了宝山的主要铅锌矿体。 相似文献
6.
清水塘铅锌矿床位于湖南省祁东县北东部,是一个中型矿床。在详细的野外地质调查基础上,本文通过矿石硫、铅同位素,含矿石英氢、氧同位素和含矿方解石碳、氧同位素等综合研究,探讨清水塘铅锌矿床成矿物质来源和成因。硫同位素研究结果表明,清水塘铅锌矿床中黄铁矿、方铅矿和闪锌矿的硫同位素δ~(34)S介于-7.41‰~2.91‰之间,重晶石的硫同位素δ~(34)S介于11.49‰~12.34‰之间,表明矿石中的硫主要来源于深源岩浆,并受到上部地壳物质的混染。黄铁矿、方铅矿和闪锌矿的Pb同位素~(206)Pb/~(204)Pb介于17.810~18.710之间,~(207)Pb/~(204)Pb介于15.497~15.726之间,~(208)Pb/~(204)Pb介于37.858~38.834之间;其中闪锌矿变化范围略偏大,表明矿石中的铅主要来源于地壳,可能混有少量地幔物质。含矿石英的氢、氧同位素δD_(SMOW)介于-87.4‰~-79.3‰之间,δ~(18)O_(H_2O)介于-8.10‰~0.63‰之间,表明成矿流体以岩浆水为主,晚期有大气降水的混入。含矿方解石的碳、氧同位素δ~(13)C_(VPDB)介于-5.3‰~-4.6‰之间,δ~(18)O_(SMOW)介于12.30‰~13.48‰之间;与地层灰岩的δ~(13)C_(VPDB)(0.9‰~2.6‰),δ~(18)O_(SMOW)(21.86‰~23.39‰)不一致;说明成矿流体中的碳主要来自深源岩浆。以上研究表明,清水塘铅锌矿床的成矿物质主要来自地壳熔融形成的岩浆,混合作用是成矿的主要机制。 相似文献
7.
夏垅铅锌银矿床位于冈底斯斑岩铜钼成矿带的西端,产于花岗岩基中,属于隐爆角砾岩型矿床。本文对其流体包裹体及H-O-S-Pb同位素组成进行了分析。成矿流体物理性质具有从中高温(240~340℃)、低盐度(2.2%~3.8%NaCl eqv)向低温(160~180℃)、低盐度(0.8%~1.7%NaCl eqv)演化的特征。矿石中石英的δD值为-156‰~-145‰,δ18 O值为-0.4‰~7.1‰,按流体包裹体均一温度换算的δ18 OH2O值为-16.7‰~-3.0‰,表明成矿流体来源于岩浆水和大气降水的混合。金属硫化物的δ34 S值变化范围较小,在-3.0‰~+5.9‰之间,按照同位素平衡系数外推法获得总硫同位素组成δ34SΣ为+9.80‰和+13.13‰,表明硫主要来源于岩浆岩,并反映成矿岩浆演化过程中可能经历了H2S去气作用。方铅矿的206 Pb/204 Pb=18.627~18.758、207 Pb/204Pb=15.598~15.682和208 Pb/204 Pb=38.637~39.298,黄铁矿的206 Pb/204 Pb=18.639~18.678、207 Pb/204 Pb=15.587~15.691和208Pb/204Pb=38.649~38.703,显示部分矿石铅富集放射性成因铅,反映铅的多来源性,即来源于上地幔铅与上地壳铅的混合。反映与夏垅铅锌银矿床成矿相关的岩浆来自于下地壳的部分熔融,并有地幔物质的补给,在岩浆上侵就位过程中又与上地壳中的岩浆房发生了岩浆混合。这也表明该地区可能存在有古老地壳,显示了区域上的独特性,为南拉萨地体区域找矿提供特有的指示意义。 相似文献
8.
扬子陆块北缘马元铅锌矿床成矿物质来源探讨: 来自C、O、H、S、Pb、Sr同位素地球化学的证据 总被引：7，自引：3，他引：4
呈层状、似层状产于震旦系灯影组角砾状白云岩层间构造带中的马元铅锌矿床是近年来在扬子陆块北缘铅锌找矿的新突破。文章通过碳、氧、氢、硫、铅和锶同位素地球化学特征研究,探讨了成矿流体和成矿金属来源。研究结果表明:矿石中热液脉石矿物的δ13CPDB为-4.24‰~0.93‰,δ18OSMOW为15.92‰~23.24‰,表明成矿流体中的CO2为震旦系碳酸盐岩的溶解成因。矿石中硫化物的δ34S变化于12.94‰~19.4‰之间;硫酸盐矿物的δ34S为32.2‰~33.48‰,表明还原硫主要来自地层中海相硫酸盐的还原。矿石硫化物的铅同位素组成均一,206Pb/204Pb、207Pb/204Pb和208Pb/204Pb分别为17.62~18.02、15.49~15.63和37.57~38.35,成矿金属可能主要来源于震旦系—志留系。脉石矿物石英流体包裹体的δDFI为-92‰和-113‰,如果取成矿温度200℃,根据δ18O石英值计算的相应流体包裹体的δ18O水为6.03‰~12.73‰,推测成矿流体可能起源于大气降水为主的盆地卤水,或为其他来源的流体与有机质反应形成。成矿流体87Sr/86Sr为0.70967~0.71146,高于赋矿围岩震旦系灯影组白云岩锶同位素比值(0.70890~0.70945),表明成矿流体流经了古生代地层(及基底),并与其中具有高锶同位素比值的碎屑岩、页岩和泥岩等进行了水岩反应及同位素交换。 相似文献
9.
湖南常宁康家湾铅锌矿床同位素地球化学研究 总被引：2，自引：0，他引：2
在详细的野外地质工作基础上,本文通过矿石硫、铅同位素,含矿石英的氢、氧同位素,以及含矿方解石的碳、氧同位素组成等综合研究,探讨康家湾铅锌矿床成矿物质来源和形成机制。结果显示矿石的δ34SVCDT介于-2.71‰~-0.90‰之间,均值为-1.42‰,表明矿石中的硫主要来自深部岩浆,可能受到地壳物质混染。矿石铅同位素206Pb/204Pb介于18.227~18.573之间,均值为18.485;207Pb/204Pb介于15.661~15.695之间,均值为15.682;208Pb/204Pb介于38.673~38.964之间,均值为38.820;铅同位素组成比较均一,具有放射铅的特征,表明成矿物质主要来源地壳,混有少量地幔物质。含矿石英中的δDSMOW介于-68.00‰~﹣60.00‰之间,均值为-64.00‰;δ18OH2O介于-7.25‰~-5.17‰之间,均值为-6.23‰;氢、氧同位素组成研究显示,成矿流体早期以岩浆水为主,后期混有大气降水。含矿方解石中的δC VPDB介于-0.50‰~0.30‰之间,均值为0‰;δ18OSMOW介于14.10‰~16.80‰之间,均值为14.40‰;含矿方解石中的碳、氧同位素与地层灰岩中的碳、氧同位素值大致相近,表明矿石中碳主要来源于晚古生代地层中的灰岩。以上研究表明,康家湾铅锌矿床的成矿物质主要来自地壳,混有少量地幔物质,混合作用可能是矿床形成的主要机制。 相似文献
10.
西藏驱龙斑岩铜矿S、Pb同位素组成:对含矿斑岩与成矿物质来源的指示 总被引：27，自引：0，他引：27
驱龙铜矿是西藏陆陆碰撞造山带冈底斯斑岩铜矿带内代表性矿床之一。本文对其含矿斑岩和矿石矿物进行了S、Pb同位素组成分析。驱龙矿床含矿斑岩与矿石矿物的硫同位素组成比较一致,含矿斑岩δ34S为-2.1‰~-1.1‰,黄铜矿δ34S为-6.3‰~-1.0‰,均值-2.76‰;硬石膏δ34S为 12.5‰~ 14.4‰,平均 13.4‰。成矿热液中的硫同位素基本达到了平衡,显示出岩浆硫组成特点。含矿斑岩的206Pb/204Pb范围为18.5104~18.6083,207Pb/204Pb变化于15.5946~15.7329之间,208Pb/204Pb为38.6821~39.1531之间;矿石矿物黄铜矿的206Pb/204Pb、207Pb/204Pb、208Pb/204Pb分别为18.4426~18.5909、15.5762~15.6145、38.5569~38.8568。含矿斑岩与矿石矿物的铅同位素组成比较一致,它们的变化幅度较小,应具有相同的起源与演化历史。无论是岩石铅还是矿石铅,在铅构造模式图上均位于造山带铅演化曲线上。驱龙矿床硫、铅同位素数据暗示,成矿物质主要来自深源岩浆,含矿斑岩起源于西藏造山带加厚的下地壳熔融,具有幔源成分的混染。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
13.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
14.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
15.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
16.
17.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
18.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献
19.
Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA 总被引：1，自引：0，他引：1
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources. 相似文献
20.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献