共查询到20条相似文献,搜索用时 125 毫秒
1.
系数矩阵存储和线性方程组求解是限制三维电磁积分方程方法发展的主要因素。Zhdanov提出准线性(QL)近似技术,建立了复杂散射场与背景场的线性关系,有效地避免了积分方程中大型线性方程组的求解,但是该算法用于多源问题航空电磁正演模拟时精度不高。因此,本文提出一种基于多重网格准线性(MGQL)近似的算法,并利用系数矩阵的Toeplitz性质存储矩阵和快速傅里叶变换,实现了矩阵与向量的快速乘积、降低了计算复杂度,采用多重网格结合了积分方程方法和准线性近似解法的优点,在保证精度的条件下提高计算速度、减少存储量。针对不同类型网格的模拟实验表明,相比于传统积分方程方法,本文算法在保证计算精度的同时,可以将计算速度极大地提高(>10倍)。 相似文献
2.
《物探化探计算技术》2019,(5)
有限元求解大地电磁正演问题时,对研究区域的剖分常规做法是采用规则化的网格。但规则化网格在剖分地形、断层、褶皱等复杂模型会产生较大的几何离散误差。针对上述情况,这里采用非结构化的四边形网格对二维地电模型进行网格剖分,并与自适应有限元相结合,由剖分的粗网格出发,利用每个频点下网格单元的后验误差估计值指导网格的局部加密,优化网格质量和数量,从而提高正演模拟的精度。通过一维K型地电模型利用本文方法算出数值解与解析解进行对比分析,验证了自适应有限元法在求解大地电磁二维正演模拟中的有效性。并通过对断层、褶皱模型的正演模拟,分析了其大地电磁正演响应特征。 相似文献
3.
积分方程法三维模拟井地电法并行算法研究 总被引:1,自引:1,他引:1
在积分方程法模拟三维电磁响应原理的基础上,对井地电法三维正演模拟并行算法做了研究。同时,还利用Fortran 6.5和消息传递接口(MPI)开发了井地电法三维正演模拟并行计算程序。在求解大型线性方程组时,采用的是稳定的双共轭梯度(BICGSTAB)算法,单机正演程序与并行正演程序的计算结果有着很好的一致性,这说明了并行算法的正确性,为进一步开发井地电法三维反演并行程序奠定了基础,也为井地电法三维正、反演程序实用化提供了技术支持。 相似文献
4.
无单元Galerkin法大地电磁三维正演模拟 总被引:1,自引:0,他引:1
无单元Galerkin法(EFGM)作为一种相对成熟的无网格方法,避免了网格剖分,其精度高,适用于复杂电导率分布和复杂边界形状的计算。本文将EFGM用于大地电磁三维正演,详述了三维EFGM形函数的构造过程,从大地电磁三维变分问题出发,利用Galerkin法结合高斯积分公式推导了相应的系统矩阵离散表达式,简述了边界条件的加载技术,研究了支持域尺寸对EFGM三维正演计算精度的影响,最后通过数值计算验证了EFGM三维算法的正确性。 相似文献
5.
基于有限单元法的二维/三维大地电磁正演模拟策略 总被引:1,自引:0,他引:1
对于二维和三维大地电磁正演问题,有限单元法最后形成了一个线性方程组KX=p。方程组中的K是大型稀疏的带状对称复系数矩阵,其条件数远大于1,为严重病态矩阵,求解其对应方程组会遇到很多困难。不完全LU分解处理的BICGSTAB算法,可用于该线性方程组的求解,并且具有速度快,精度高,稳定性好等优点。为了模拟无穷远边界及满足计算机的内存需求,在保证计算精度的情况下,设计了非均匀网格剖分。在程序编制中,因只存储有限元系数矩阵的非零元素,大大减少了正演计算的时间。通过对二维模型和三维模型电磁响应的计算,验证了该算法的正确性。 相似文献
6.
利用二次场算法研究了可控源音频大地电磁法二维正演问题。采用有限单元法进行正演模拟,将矩阵压缩存储和共轭梯度解方程方法应用到正演算法中,加快了正演算法的速度,并且将地形因素考虑到正演算法中。通过不同的模型验算,检验了算法的精度。 相似文献
7.
目前有限元技术的开发及在电磁勘查技术中的应用已日趋成熟.然而,有限元正演模拟主要集中于地面和海洋电磁,航空电磁三维有限元模拟尚没有受到足够重视.以前人工作为基础,利用结构化网格实现了航空电磁系统的三维矢量有限元正演模拟.从二次场双旋度矢量非齐次亥姆霍兹方程出发,应用广义变分原理推导出变分方程,并采用六面体单元剖分,将场置于单元棱边上,对每个单元应用线性插值,最后合成含有稀疏矩阵的线性方程组.针对航空电磁多源性问题,利用MUMPS(multifrontal massively parallel sparse direct solver)直接求解器进行求解,在保证精度的前提下大幅度提高计算速度.利用单个异常体模型检验算法的精度和软件的稳定性,进而通过典型地电模型的模拟验证算法的有效性.对不同地下电性结构正演模拟结果进行对比分析,进一步研究了覆盖层和垂直接触带等典型构造对航空电磁响应的影响特征. 相似文献
8.
大地电磁正演的精度对后续反演意义重大。决定大地电磁有限元正演精度的因素,主要有插值函数、方程组的求解误差,以及网格的剖分程度。而网格剖分的合适与否,为有限元的求解提供了先决条件。因此,从边界条件和横向网格以及纵向网格三方面,讨论了网格剖分对大地电磁正演精度的影响。经研究表明,对于一维和左右对称的二维介质,左右和下边界都无需放置在无穷远处,并且横向网格对精度影响不大。而由于纵向网格与近地表的最小趋肤深度密切相关,所以地表网格不得大于1/4个趋肤深度。 相似文献
9.
利用有限元方法进行大地电磁正演数值模拟时,由于是在有限网格区域上的数值计算,模拟计算时的网格边界为截断边界,而有限元数值模拟时的大地电磁场边界条件需要在足够远处才能够满足,所以截断边界的存在可能会使大地电磁正演模拟的边界条件无法满足,致使对计算结果和计算精度产生影响。利用有限元二维正演程序,在网格边界处加载一维情况下的大地电磁场,然后固定研究区域的网格剖分,并对一维地电模型和二维地电模型在改变有限元网格边界大小的情况下进行计算。在对一维模型进行模拟计算时,截断边界对边界条件没有影响,边界条件自然满足。而对二维模型进行模拟计算时,截断边界的存在对计算结果有较大影响。利用趋肤深度作为有限元网格边界变化的量度,通过改变网格边界大小,对不同的二维地电模型进行计算比较,总结出适合大地电磁有限元正演模拟的参考网格边界。 相似文献
10.
为了更好地模拟地下介质连续变化及开展连续介质的反演,对二维电导率分块线性变化的线源频率域可控源电磁法进行了有限元正演模拟,在剖分单元内同时对电场及电导率参数线性插值,使电导率参数在剖分单元之间保持连续变化。首先,提出有限元正演模拟的边值问题及变分问题,并详细论述了有限元的剖分、插值、单元分析及总体合成的各个步骤;其次,采用稀疏存储及基于不完全LU分解的BICGSTAB算法求解复系数方程组,节省了内存并提高了计算速度;然后,对一个均匀半空间模型进行模拟,计算结果表明,低频及高频的有限元数值解都与解析解吻合,证明了算法的正确性;最后,对水平层状模型及垂直断层模型进行正演计算,视电阻率及相位的等值线图均较好地反映出了异常体,说明文中算法能够对电导率连续变化的线源可控源电磁法进行有效地模拟。 相似文献
11.
12.
大地电磁场三维地形影响的矢量有限元数值模拟 总被引:1,自引:0,他引:1
地形对大地电磁场的影响规律研究对于实际大地电磁测深反演解释具有重要的意义。基于矢量有限元法进行了大地电磁三维地形响应数值模拟。首先与二维地形模拟结果比较,验证了算法的正确性;接着,分别对1个山峰地形和1个山谷地形进行了模拟;最后,比较了二维模拟与三维模拟结果。结果表明:三维阻抗张量的Zxy模式和Zyx模式都会受到地形影响;用二维地形模拟结果去近似三维地形响应,二维TE模式与真实三维响应结果差别很大,TM模式接近真实三维响应结果;如采用二维反演处理带地形的三维MT数据,TM极化模式反演更为合理。 相似文献
13.
14.
We developed a three-dimensional(3D) conjugate gradient inversion algorithm for in-verting magnetotelluric impedance tensor measurements.In order to show the importance of including diagonal components of magnetotelluric impedance tensor in 3D inversion,synthetic data were inverted using the 3D conjugate gradient inversion,and the inversion results were compared and analyzed.The results from the 3D inversion of synthetic data indicate that both the off-diagonal and the diagonal components are required in in... 相似文献
15.
The mixed finite-element approximation to a second-order elliptic PDE results in a saddle-point problem and leads to an indefinite
linear system of equations. The mixed system of equations can be transformed into coupled symmetric positive-definite matrix
equations, or a Schur complement problem, using block Gauss elimination. A preconditioned conjugate-gradient algorithm is
used for solving the Schur complement problem. The mixed finite-element method is closely related to the cell-centered finite
difference scheme for solving second-order elliptic problems with variable coefficients. For the cell-centered finite difference
scheme, a simple multigrid algorithm can be defined and used as a preconditioner. For distorted grids, an additional iteration
is needed. Nested iteration with a multigrid preconditioned conjugate gradient inner iteration results in an effective numerical
solution technique for the mixed system of linear equations arising from a discretization on distorted grids. Numerical results
show that the preconditioned conjugate-gradient inner iteration is robust with respect to grid size and variability in the
hydraulic conductivity tensor. 相似文献
16.
三维电阻率成像新方法及应用 总被引:4,自引:0,他引:4
三维电阻率成像法包括近似三维反演因子和综合子空间解释器,三维反演因子用于正向线性电阻率近似解译,综合子空间法是共轭梯度法的变换,是求解大型最优化问题的有效方法.三维成像是线性反演问题,不需正演模拟或敏感度修改.在非线性三维反演中,三维电阻率成像技术可直接获取三维电阻率的分布信息,或提供中间过程的模式修改.野外资料验证表明,三维成像技术可提供电阻率空间的分布信息. 相似文献
17.
Wide-band magnetotelluric (MT) data were collected on an east–west profile, approximately perpendicular to the local strike of the Chelungpu thrust, through the hypocentral area of the Chi-Chi earthquake for imaging the seismogenic structure. MT data were then inverted for two-dimensional resistivity models plus best-fitting static shift parameters using a nonlinear conjugate gradient algorithm that minimizes the sum of the normalized data misfits and the smoothness of the model. As shown in the inverted 2D resistivity models presented in this paper, an electrical conductor beside the hypocenter of the Chi-Chi earthquake indicates that deep-crustal fluids may participate in the rupture process of the Chi-Chi earthquake. A striking spatial correlation between the crustal conductor and occurrence of aftershocks beneath the Chelungpu fault suggests a postseismic pore pressure adjustment ongoing after the mainshock. Additionally, the hypocenter exhibits an electrical resistive zone, consistent very well with a predicted compact zone from a crustal deformation and transient fluid flow modeling. 相似文献
18.
ZHANG Letian YE Gaofeng JIN Sheng WEI Wenbo Martyn UNSWORTH Alan G. JONES JING Jianen DONG Hao XIE Chengliang Florian LE PAPE Jan VOZAR 《《地质学报》英文版》2015,89(1):90-104
Project INDEPTH (InterNational DEep Profiling of Tibet and the Himalaya) is an interdisciplinary program designed to develop a better understanding of deep structures and mechanics of the Tibetan Plateau. As a component of magnetotelluric (MT) work in the 4th phase of the project, MT data were collected along a profile that crosses the eastern segment of the Altyn Tagh fault on the northern margin of the plateau. Time series data processing used robust algorithms to give high quality responses. Dimensionality analysis showed that 2D approach is only valid for the northern section of the profile. Consequently, 2D inversions were only conducted for the northern section, and 3D inversions were conducted on MT data from the whole profile. From the 2D inversion model, the eastern segment of the Altyn Tagh fault only appears as a crustal structure, which suggests accommodation of strike slip motion along the Altyn Tagh fault by thrusting within the Qilian block. A large-scale off-profile conductor within the mid-lower crust of the Qilian block was revealed from the 3D inversion model, which is probably correlated with the North Qaidam thrust belt. Furthermore, the unconnected conductors from the 3D inversion model indicate that deformations in the study area are generally localized. 相似文献
19.