共查询到20条相似文献，搜索用时 31 毫秒
1.
Kinematic analysis of fault slip data for stress determination was carried out on Late Miocene to Quaternary rocks from the fore arc and intra-arc regions of the Chilean Andes, between 33° and 46° south latitudes. Studies of Neogene and Quaternary infilling (the Central Depression), as well as plutonic rocks of the North Patagonian Batholith along the Liquiñe–Ofqui Fault Zone, have revealed various compressional and/or transpressional states of stress. In the Pliocene, the maximum compressional stress (σ1) was generally oriented east–west. During the Quaternary, the deformation was partitioned into two coeval distinctive states of stress. In the fore arc zone, the state of stress was compressional, with σ1 oriented in a N–S to NNE–SSW direction. In the intra-arc zone the state of stress was transpressional with σ1 striking NE–SW. Along the coast, in one site (37°30′S) the Quaternary strain deformation is extensional, with an E–W direction, which can be explained by a co-seismic crustal bending readjustment. 相似文献
2.
Permian to Cretaceous mélange of the McHugh Complex on the Kenai Peninsula, south-central Alaska includes blocks and belts of graywacke, argillite, limestone, chert, basalt, gabbro, and ultramafic rocks, intruded by a variety of igneous rocks. An oceanic plate stratigraphy is repeated hundreds of times across the map area, but most structures at the outcrop scale extend lithological layering. Strong rheological units occur as blocks within a matrix that flowed around the competent blocks during deformation, forming broken formation and mélange. Deformation was noncoaxial, and disruption of primary layering was a consequence of general strain driven by plate convergence in a relatively narrow zone between the overriding accretionary wedge and the downgoing, generally thinly sedimented oceanic plate. Soft-sediment deformation processes do not appear to have played a major role in the formation of the mélange. A model for deformation at the toe of the wedge is proposed in which layers oriented at low angles to σ1 are contracted in both the brittle and ductile regimes, layers at 30–45° to σ1 are extended in the brittle regime and contracted in the ductile regime, and layers at angles greater than 45° to σ1 are extended in both the brittle and ductile regimes. Imbrication in thrust duplexes occurs at deeper levels within the wedge. Many structures within mélange of the McHugh Complex are asymmetric and record kinematic information consistent with the inferred structural setting in an accretionary wedge. A displacement field for the McHugh Complex on the lower Kenai Peninsula includes three belts: an inboard belt of Late Triassic rocks records west-to-east-directed slip of hanging walls, a central belt of predominantly Early Jurassic rocks records north–south directed displacements, and Early Cretaceous rocks in an outboard belt preserve southwest–northeast directed slip vectors. Although precise ages of accretion are unknown, slip directions are compatible with inferred plate motions during the general time frame of accretion of the McHugh Complex. The slip vectors are interpreted to preserve the convergence directions between the overriding and underriding plates, which became more oblique with time. They are not considered indicative of strain partitioning into belts of orogen-parallel and orogen-perpendicular displacements, because the kinematic data are derived from the earliest preserved structures, whereas fabrics related to strain partitioning would be expected to be superimposed on earlier accretion-related fabrics. 相似文献
3.
We present a revision and a seismotectonic interpretation of deep crust strike–slip earthquake sequences that occurred in 1990–1991 in the Southern Apennines (Potenza area). The revision is motivated by: i) the striking similarity to a seismic sequence that occurred in 2002 140 km NNW, in an analogous tectonic context (Molise area), suggesting a common seismotectonic environment of regional importance; ii) the close proximity of such deep strike–slip seismicity with shallow extensional seismicity (Apennine area); and iii) the lack of knowledge about the mechanical properties of the crust that might justify the observed crustal seismicity. A comparison between the revised 1990–1991 earthquakes and the 2002 earthquakes, as well as the integration of seismological data with a rheological analysis offer new constraints on the regional seismotectonic context of crustal seismicity in the Southern Apennines. The seismological revision consists of a relocation of the aftershock sequences based on newly constrained velocity models. New focal mechanisms of the aftershocks are computed and the active state of stress is constrained via the use of a stress inversion technique. The relationships among the observed seismicity, the crustal structure of the Southern Apennines, and the rheological layering are analysed along a crustal section crossing southern Italy, by computing geotherms and two-mechanism (brittle frictional vs. ductile plastic strength) rheological profiles. The 1990–1991 seismicity is concentrated in a well-defined depth range (mostly between 15 and 23 km depths). This depth range corresponds to the upper pat of the middle crust underlying the Apulian sedimentary cover, in the footwall of the easternmost Apennine thrust system. The 3D distribution of the aftershocks, the fault kinematics, and the stress inversion indicate the activation of a right-lateral strike–slip fault striking N100°E under a stress field characterized by a sub-horizontal N142°-trending σ1 and a sub-horizontal N232°-trending σ3, very similar to the known stress field of the Gargano seismic zone in the Apulian foreland. The apparent anomalous depths of the earthquakes (> 15 km) and the confinement within a relatively narrow depth range are explained by the crustal rheology, which consists of a strong brittle layer at mid crustal depths sandwiched between two plastic horizons. This articulated rheological stratification is typical of the central part of the Southern Apennine crust, where the Apulian crust is overthrusted by Apennine units. Both the Potenza 1990–1991 and the Molise 2002 seismic sequences can be interpreted to be due to crustal E–W fault zones within the Apulian crust inherited from previous tectonic phases and overthrusted by Apennine units during the Late Pliocene–Middle Pleistocene. The present strike–slip tectonic regime reactivated these fault zones and caused them to move with an uneven mechanical behaviour; brittle seismogenic faulting is confined to the strong brittle part of the middle crust. This strong brittle layer might also act as a stress guide able to laterally transmit the deviatoric stresses responsible for the strike–slip regime in the Apulian crust and may explain the close proximity (nearly overlapping) of the strike–slip and normal faulting regimes in the Southern Apennines. From a methodological point of view, it seems that rather simple two-mechanism rheological profiles, though affected by uncertainties, are still a useful tool for estimating the rheological properties and likely seismogenic behaviour of the crust. 相似文献
4.
The Húsavík–Flatey Fault (HFF) is an oblique dextral transform fault, part of the Tjörnes Fracture Zone (TFZ), that connects the North Volcanic Zone of Iceland and the Kolbeinsey Ridge. We carry out stress inversion to reconstruct the paleostress fields and present-day stress fields along the Húsavík–Flatey Fault, analysing 2700 brittle tectonic data measured on the field and about 700 earthquake focal mechanisms calculated by the Icelandic Meteorological Office. This allows us to discuss the Latest Cenozoic finite deformations (from the tectonic data) as well as the present-day deformations (from the earthquake mechanisms). In both these cases, different tectonic groups are reconstructed and each of them includes several distinct stress states characterised by normal or strike-slip faulting. The stress states of a same tectonic group are related through stress permutations (σ1−σ2 and σ2−σ3 permutations as well as σ1−σ3 reversals). They do not reflect separate tectonic episodes. The tectonic groups derived from the geological data and the earthquake data have striking similarity and are considered to be related. The obliquity of the Húsavík–Flatey Fault implies geometric accommodation in the transform zone, resulting mainly from a dextral transtension along an ENE–WSW trend. This overall mechanism is subject to slip partitioning into two stress states: a Húsavík–Flatey Fault-perpendicular, NE–SW trending extension and a Húsavík–Flatey Fault-parallel, NW–SE trending extension. These three regimes occur in various local tectonic successions and not as a regional definite succession of tectonic events. The largest magnitude earthquakes reveal a regional stress field tightly related to the transform motion, whereas the lowest magnitude earthquakes depend on the local stress fields. The field data also reveal an early extension trending similar to the spreading vector. The focal mechanism data do not reflect this extension, which occurred earlier in the evolution of the HFF and is interpreted as a stage of structural development dominated by the rifting process. 相似文献
5.
This study defines the Mio-Pliocene to present-day stress regime acting at the northeastern corner of the eastern Mediterranean region along the Karasu Valley (i.e., the Amanos Range), taking in the Antakya, Osmaniye and Kahramanmaras provinces. The inversion slip vectors measured on fault planes and chronologies between striations indicate that the stress regime varied from transpressional initially to transtensional, having consistent NW- and NE-trending σHmax (σ1) and σHmin (σ3) axes, respectively; there are significantly different mean stress-ratio (Rm) values however. The older mean stress state is characterized by N151±11°E-trending σ1 and N59±12°E-trending σ3 axes, and by a mean arithmetic Rm value of 0.76, indicating that the regional stress regime is transpressional. The younger stress regime is characterized by N154±8°E-trending σ1 and N243±8°E-trending σ3 axes, and by a mean arithmetic Rm value of 0.17, indicating a transtensional character for this regional stress regime. The low R values of the stress deviators related to the recent stress state reflect normal-component slips. The earthquake focal mechanism inversions confirm that the younger stress regime continues into the Recent. The inversion identifies a transtensional stress regime representing strike-slip and an extensional stress state with a consistent NE-trending σHmin (σ3) axis. These stress states are characterized by N66°E and N249°E-trending σ3 axes, respectively. Both significant regional stress regimes induce left-lateral displacement along the southern part of the East Anatolian Fault (EAF, or Amanos Fault). The temporal change, probably in Quaternary time, within the regional stress regime—from transpression to transtension—resulted from the coeval influences of subduction processes in the west–southwest (i.e., along the Cyprus arc), continental collision in the east, and westward escape of the Anatolian block. 相似文献
6.
We estimated the stress fields of the aftershocks of the 2000 western Tottori earthquake (Mw 6.6) and the northern Hyogo swarm (max Mw 5.2) by a stress tensor inversion of moment tensor solutions reported from the National Research Institute for Earth Science and Disaster Prevention (Japan). The maximum principal stress direction of the western Tottori sequence was estimated as N107°E with a strike–slip regime. In the northern Hyogo swarm, the orientations of the principal stress directions could not be well constrained by the observed data, but after examining the detailed characteristics of the solution, we obtained a most probable solution of N113°E for the σ1 direction. These solutions are consistent with the maximum horizontal directions roughly estimated from the strike directions of large earthquakes occurring geographically between these two seismic activities. We measured the angle between each fault–slip direction and maximum principal stress direction to investigate the frictional properties of earthquakes. The distribution of the angles was forward modeled to estimate the coefficient of friction and the stress ratio, assuming uniformly distributed fault orientations. For the western Tottori sequence, a homogeneous stress field with a coefficient of friction less than 0.4 was estimated. A high stress level was also suggested because very little change occurred in the stress field during the mainshock. For the northern Hyogo sequence, the coefficient of friction was estimated to be between 0.5 and 1.0. 相似文献
7.
The densification curves for the hot-pressing of pure olivine powders were obtained as a function of grain size (5 μ–2000 μ), temperature (1000–1600°C), and compacting stress (166–298 bars). This range of variables was found to straddle two fields of hot-pressing behavior, one dominated by power-law creep, one by Coble creep. The time required to density a powder to 99% of the single crystal density could be represented by the shorter of the two times: t1 = 2.2 · 103σ−3.4exp(85,000/RT)t2 = 1.3 · 104σ−1.5(G)+3exp(85,000/RT) where the compacting stress or pressure, σ, is given in bars and the grain size, G, in centimeters. It was also possible to estimate the parameters appropriate to Coble creep in a solid polycrystalline aggregate from the hot-pressing data; and these were:
The strain rates computed from this formula are close to those predicted by Stocker and Ashby (1973) and those found by Twiss (1976). 相似文献
Full-size image (1K)
8.
Oxana V. Lunina Andrei S. Gladkov Igor S. Novikov Anna R. Agatova Evgenii M. Vysotskii Alexei A. Emanov 《Tectonophysics》2008,453(1-4):276
The co-seismic deformations produced during the September 27, 2003 Chuya earthquake (Ms = 7.5) that affected the Gorny Altai, Russia, are described and discussed along a 30 km long segment. The co-seismic deformations have manifested themselves both in unconsolidated sediments as R- and R′-shears, extension fractures and contraction structures, and in bedrock as the reactivation of preexisting schistosity zones and individual fractures, as well as development of new ruptures and coarse crushing zones. It has been established that the pattern of earthquake ruptures represents a typical fault zone trending NW–SE with a width reaching 4–5 km and a dextral strike–slip kinematics. The initial stress field that produced the whole structural pattern of co-seismic deformations during the Chuya earthquake, is associated with a transcurrent regime with a NNW–SSE, almost N–S, trending of compressional stress axis (σ1), and a ENE–WSW, almost E–W, trending of tensional stress axis (σ3). The state of stress in the newly-formed fault zone is relatively uniform. The local stress variations are expressed in insignificant deviation of σ1 from N–S to NW–SE or NE–SW, in short-term fluctuations of relative stress values in keeping their spatial orientations, or in a local increase of the plunge angle of the σ1. The geometry of the fault zone associated with the Chuya earthquake has been compared with the mechanical model of fracturing in large continental fault zones with dextral strike–slip kinematics. It is apparent that the observed fracture pattern corresponds to the late disjunctive stage of faulting when the master fault is not fully developed but its segments are already clearly defined. It has been shown that fracturing in widely different rocks follows the common laws of the deformation of solid bodies, even close to the Earth surface, and with high rates of movements. 相似文献
9.
Talc is one of the weakest minerals that is associated with fault zones. Triaxial friction experiments conducted on water-saturated talc gouge at room temperature yield values of the coefficient of friction, μ (shear stress, τ/effective normal stress, σ′N) in the range 0.16–0.23, and μ increases with increasing σ′N. Talc gouge heated to temperatures of 100°–400 °C is consistently weaker than at room temperature, and μ < 0.1 at slow strain rates in some heated experiments. Talc also is characterized by inherently stable, velocity-strengthening behavior (strength increases with increasing shear rate) at all conditions tested. The low strength of talc is a consequence of its layered crystal structure and, in particular, its very weak interlayer bond. Its hydrophobic character may be responsible for the relatively small increase in μ with increasing σ′N at room temperature compared to other sheet silicates.Talc has a temperature–pressure range of stability that extends from surficial to eclogite-facies conditions, making it of potential significance in a variety of faulting environments. Talc has been identified in exhumed subduction zone thrusts, in fault gouge collected from oceanic transform and detachment faults associated with rift systems, and recently in serpentinite from the central creeping section of the San Andreas fault. Typically, talc crystallized in the active fault zones as a result of the reaction of ultramafic rocks with silica-saturated hydrothermal fluids. This mode of formation of talc is a prime example of a fault-zone weakening process. Because of its velocity-strengthening behavior, talc may play a role in stabilizing slip at depth in subduction zones and in the creeping faults of central and northern California that are associated with ophiolitic rocks. 相似文献
10.
Mrio Neto Cavalcanti de Araújo Fernando Csar Alves da Silva Emanuel Ferraz Jardim de S Rodney J. Holcombe Paulo Marcos de Vasconcelos 《Journal of Structural Geology》2003,25(12):2089-2107
The polyphase evolution of the Seridó Belt (NE-Brazil) includes D1 crust formation at 2.3–2.1 Ga, D2 thrust tectonics at 1.9 Ga and crustal reworking by D3 strike-slip shear zones at 600 Ma. Microstructural investigations within mylonites associated with D2 and D3 events were used to constrain the tectono-thermal evolution of the belt. D2 shear zones commenced at deeper crustal levels and high amphibolite facies conditions (600–650 °C) through grain boundary migration, subgrain rotation and operation of quartz c-prism slip. Continued shearing and exhumation of the terrain forced the re-equilibration of high-T fabrics and the switching of slip systems from c-prism to positive and negative a-rhombs. During D3, enhancement of ductility by dissipation of heat that came from syn-D3 granites developed wide belts of amphibolite facies mylonites. Continued shearing, uplift and cooling of the region induced D3 shear zones to act in ductile-brittle regimes, marked by fracturing and development of thinner belts of greenschist facies mylonites. During this event, switching from a-prism to a-basal slip indicates a thermal path from 600 to 350 °C. Therefore, microstructures and quartz c-axis fabrics in polydeformed rocks from the Seridó Belt preserve the record of two major events, which includes contrasting deformation mechanisms and thermal paths. 相似文献
11.
This study presents a structural analysis based on hundreds of striated small faults (fault-slip data) in the Amman area east of the Dead Sea Transform System. Stress inversion of the fault-slip data was performed using an improved Right-Dihedral method, followed by rotational optimization (TENSOR Program, Delvaux, 1993). Fault-slip data (totaling 212) include fault planes, striations and sense of movements, are obtained from the Turonian Wadi As Sir Formation, distributed mainly along the southern side of the Amman – Hallabat structure in Jordan the study area. Results show that σ1 (SHmax) and σ3 (SHmin) are generally sub-horizontal and σ2 is sub-vertical in 8 of 11 paleostress tensors, which are belonging to a major strike-slip system with σ1 swinging around N to NW direction. The other three stress tensors show σ2 (SHmax), σ1 vertical and σ3 is NE oriented. This situation explained as permutation of stress axes σ1 and σ2 that occur during tectonic events and partitioned strike slip deformation. NW compressional stresses affected the area and produced the major Amman – Hallabat strike-slip fault and its related structures, e.g., NW trending normal faults and NE trending folds in the study area.The new paleostress results related with the active major stress field of the region the Dead Sea Stress Field (DSS) during the Miocene to Recent. 相似文献
12.
Microstructures and quartz c-axis fabrics were analyzed in five quartzite samples collected across the eastern aureole of the Eureka Valley–Joshua Flat–Beer Creek composite pluton. Temperatures of deformation are estimated to be 740±50 °C based on a modified c-axis opening angle thermometer of Kruhl (J. Metamorph. Geol. 16 (1998) 142). In quartzite layers located closest (140 m) to the pluton-wall rock contact, flattened detrital grains are plastically deformed and partially recrystallized. The dominant recrystallization process is subgrain rotation (dislocation creep regime 2 of Hirth and Tullis (J. Struct. Geol. 14 (1992) 145)), although grain boundary migration (dislocation creep regime 3) is also evident. Complete recrystallization occurs in quartzite layers located at a distance of 240 m from the contact, and coincides with recrystallization taking place dominantly through grain boundary migration (regime 3). Within the quartzites, strain is calculated to be lowest in the layers closest to the pluton margin based on the aspect ratios of flattened detrital grains.The c-axis fabrics indicate that a slip operated within the quartzites closest to the pluton-wall rock contact and that with distance from the contact the operative slip systems gradually switch to prism [c] slip. The spatial inversion in microstructures and slip systems (apparent “high temperature” deformation and recrystallization further from the pluton-contact and apparent “low temperature” deformation and recrystallization closer to the pluton-contact) coincides with a change in minor phase mineral content of quartzite samples and also in composition of the surrounding rock units. Marble and calc-silicate assemblages dominate close to the pluton-wall rock contact, whereas mixed quartzite and pelite assemblages are dominant further from the contact.We suggest that a thick marble unit located between the pluton and the quartzite layers acted as a barrier to fluids emanating from the pluton. Decarbonation reactions in marble layers interbedded with the inner aureole quartzites and calc-silicate assemblages in the inner aureole quartzites may have produced high XCO2 (water absent) fluids during deformation. The presence of high XCO2 fluid is inferred from the prograde assemblage of quartz+calcite (and not wollastonite)+diopside±K-feldspar in the inner aureole quartzites. We suggest that it was these “dry” conditions that suppressed prism [c] slip and regime 3 recrystallization in the inner aureole and resulted in a slip and regime 2 recrystallization, which would normally be associated with lower deformation temperatures. In contrast, the prograde assemblage in the pelite-dominated outer part of the aureole is biotite+K-feldspar. These “wet” pelitic assemblages indicate fluids dominated by water in the outer part of the aureole and promoted prism [c] slip and regime 3 recrystallization. Because other variables could also have caused the spatial inversion of c-axis fabrics and recrystallization mechanisms, we briefly review those variables known to cause a transition in slip systems and dislocation creep regimes in quartz. Our conclusions are based on a small number of samples, and therefore, the unusual development of crystal fabrics and microstructures in the aureole to the EJB pluton suggests that further study is needed on the effect of fluid composition on crystal slip system activity and recrystallization mechanisms in naturally deformed rocks. 相似文献
13.
In normal faulting regimes, the magnitudes and orientations of the maximum and minimum principal compressive stresses may be known with some confidence. However, the magnitude of the intermediate principal compressive stress is generally much more difficult to constrain and is often not considered to be an important factor. In this paper, we show that the slip characteristics of faults and fractures with complex or nonoptimal geometry are highly sensitive to variation or uncertainty in the ambient effective intermediate principal stress (σ′2). Optimally oriented faults and fractures may be less sensitive to such variations or uncertainties. Slip tendency (Ts) analysis provides a basis for quantifying the effects of uncertainty in the magnitudes and orientations of all principal stresses and in any stress regime, thereby focusing efforts on the most important components of the system. We also show, for a normal faulting stress regime, that the proportion of potential surfaces experiencing high slip tendency (e.g., Ts ≥ 0.6) decreases from a maximum of about 38% where σ′2 = σ′3, to a minimum of approximately 14% where σ′2 is halfway between σ′3 and σ′1, and increases to another high of approximately 29% where σ′2 = σ′1. This analysis illustrates the influence of the magnitude of σ′2 on rock mass strength, an observation previously documented by experimental rock deformation studies. Because of the link between fault and fracture slip characteristics and transmissivity in critically stressed rock, this analysis can provide new insights into stress-controlled fault transmissivity. 相似文献
14.
Bonini (2009, Structural controls on a carbon dioxide-driven mud volcano field in the Northern Apennines (Pieve Santo Stefano, Italy): relations with pre-existing steep discontinuities and seismicity. Journal of Structural Geology 31, 44–54) presents a 2D mechanical analysis to infer the failure conditions responsible for the seismicity distribution during an Mw = 4.6 seismic sequence nucleating during 2001 in the Northern Apennines. In my view the mechanical analysis presented in this paper has some weakness or is not well constrained, in particular: 1) the assumption of a dip angle of 50°, is not consistent with the activated structures; 2) the Pf = σ3 condition, difficult to be attained along a cohesionless fault dipping at 50°; 3) the isotropic stress state, i.e. σ2 = σ3, that is not consistent with the active or recent stress field in the area. 相似文献
15.
Previous experiments by Raleigh et al. (1971) have shown that at strain rates of 10−2.sec−1 to 10−7.sec−1 only slip occurs in dry enstatite at temperatures above 1300°C and 1000°C, respectively.The present experiments have been conducted on polycrystalline enstatite under wet conditions in this regime where enstatite only slips, polygonizes and recrystallizes. Slip occurs throughout the whole regime on the system (100)[001] and at strains greater than 40% the system (010)[001] is observed. Polygonization and intragranular recrystallization begin at about 1300°C and 10−4.sec−1 and the orientation of these neoblasts is host-controlled. At lower strain rates intergranular neoblasts develop and their fabric is one of [100] maximum parallel with σ1 and [010] and [001] girdles in the σ2 = σ3 plane, similar to those in natural enstatite tectonites.Dislocation substructures of experimentally deformed enstatite have been examined by transmission electron microscopy. The samples were deformed within the field in which slip polygonization and recrystallization are the dominant deformation mechanisms. Samples within this regime have microstructures that are characterized by stacking faults and partial dislocations. Under the conditions of steady-state flow in olivine, these microstructures inhibit the operation of recovery mechanisms in enstatite.Other samples deformed within the polygonization and recrystallization field have microstructures that confirm the optical observations of intragranular and intergranular growth of neoblasts. It is suggested that the former result from strain-induced tilt of subrains, whereas the latter may result from bulge nucleation into adjacent subgrains.Mechanical data from constant strain-rate experiments at steady state, stress relaxation and temperature-differential creep tests are best fit to a power-law creep equation with the stress exponent, n~3 and the apparent activation energy for creep, Q~65 kcal/mole. Extrapolation of this equation to a representative natural geologic strain rate of 10−4. sec−1, over the temperature interval 1000–2000°C, gives an effective viscosity range of 1020–1018 poise and stresses in the range of 7-0.1 bar, respectively. Comparison with corrected wet-olivine mechanical data (Carter, 1976) over the same environment indicates that olivine is consistently the weaker of the two minerals and will recrystallize whilst enstatite will only slip and kink, thus accounting for the different habits of olivine and enstatite in ultramafic tectonites. 相似文献
16.
Paleostress orientations were calculated from fault-slip data of 36 sites located along a traverse through the Central Betic Cordilleras (southern Spain). Heterogeneous fault sets, which are frequent in the area, have been divided into homogeneous subsets by cross-cutting relationships observed in the field and by a paleostress stratigraphy approach applied on each individual fault population. The state of stress was sorted according to main tectonic events and a new chronology is presented of the Miocene to Recent deformation in the central part of the Betic Cordilleras. The deviatoric stress tensors fall into four distinct groups that are regionally consistent and correlate with three Late Oligocene–Aquitanian to Recent major tectonic events in the Betic Cordilleras. The new chronology of the neotectonic evolution includes, from oldest to youngest, the following main tectonic phases:
- (1) Late Oligocene–Aquitanian to Early Tortonian: σ1 subhorizontal N–S, partly E–W directed, σ3 subvertical; compressional structures (thrusting of nappes, large-scale folding) and strike-slip faulting in the Alborán Domain and the External Zone of the Betic Cordilleras;
- (2) Early Tortonian to Pliocene–Pleistocene: σ1 subvertical, σ3 subhorizontal NW–SE, partly N–S directed or E–W-directed (radial extension); large-scale normal faulting in the Central Betic Cordilleras and in the oldest Neogene formations of the Granada Basin related to the gravitational collapse of the Betic Cordilleras and the exhumation of the intensely metamorphosed rock series of the Internal Zones, at the same time formation of the Alborán Basin and intramontane basins such as the Granada Basin;
- (3) Pleistocene to Recent: (3a) σ1 subvertical, σ3 subhorizontal NE–SW with prominent normal faulting, but coevally; (3b) σ1 subhorizontal NW directed, σ3 NE–SW subhorizontal with strike-slip faulting. Extensional structures and strike-slip faulting are related to the ongoing convergence of the Eurasian and African Plates and coeval uplift of the Betic Cordilleras. Reactivation of pre-existing fractures and faults was frequently observed. Phase 3 is interpreted as periodic strike-slip and normal faulting events due to a permutation of the principal stress axes, mainly σ1 and σ2.
Keywords: Neotectonics; Paleostress; Fault-slip data; Deformation history; Betic Cordilleras 相似文献
17.
Paleostress analysis of the Cretaceous rocks in the eastern margin of the Dead Sea transform, Jordan
Abdullah A. Diabat Mohammad Atallah Mustafa R. Salih 《Journal of African Earth Sciences》2004,38(5):155
This paper presents the first paleostress results from fault-slip data on Cretaceous limestone at the eastern rim of the Dead Sea transform (DST) in Jordan. Stress inversion of fault-slip data is performed using an improved right dieder method, followed by rotational optimization (Delvaux, TENSOR Program). The orientation of the principal stress axes (σ1, σ2 and σ3) and the ratio of the principal stress differences (
) show two main paleostress fields marking two main stress regimes, strike-slip and extensional. The first is characterized by NNW–SSE compression and ENE–WSW extension and related to Middle Miocene-Recent sinistral movement along the Dead Sea transform and the opening of the Red Sea. The second paleostress field is a WNW–ESE compression and NNE–SSW extension restricted to the northern part of the investigated area. This stress field could be associated with the development of the Syrian Arc fold belt which started during the Turonian, or it may be due to an anticlockwise rotation of the first stress field. 相似文献
18.
Fault plane solutions (FPS) from 110 earthquakes in the northern Rhine area with local magnitudes, ranging from 1.0 to 6.1, and occurring between 1976 and 2002 are determined. FPS are retrieved from P-wave first motions using a grid search approach allowing a detailed exploration of the parameter space. The influence of the 1D velocity model on take-off angles and resulting FPS is examined. All events were relocated with a recently developed minimum 1D model of the velocity structure [J. Geophys. Res. (2003)]. Rose diagrams of the orientation of P, T and B axes show a clear preference of trends of P and T axes at N292°E and N27°E, respectively. The majority of B axes trend in northerly directions. Plunges of P and T axes are mostly around 45° while most B axes are subhorizontal. The main direction of the maximum horizontal stress directly inferred from the fault plane solutions is N118°E.To calculate the orientations of the principal stress axes and the shape of the stress tensor, the inversion method of Gephard and Forsyth [J. Geophys. Res. 89 (1984) 9305] was applied to the whole data set and to several subsets of data. The subsets were formed by grouping events from various geological and tectonic areas and by grouping events into different depth ranges. The subset areas include the Lower Rhine Embayment, the Rhenish Massif, the middle Rhine area, the Neuwied Basin and the area known as the Stavelot–Venn Massif. Inversion of the entire data set shows some ambiguity between a strike-slip and extensional stress regime, with a vertical axis for the medium principal stress and a trend of N305°E and N35°E for the σ1 and σ3 axis, respectively, as the best fitting tensor. Earthquakes from the Lower Rhine Embayment and, to some degree, from the middle Rhine area indicate an extensional stress regime. In the Lower Rhine Embayment, plunge and trend of the σ1 axis are 76° and N162°E and for the σ3 axis 7° and N42°E. The best fitting solution for the area of the Stavelot–Venn Massif is a strike-slip regime with subhorizontal σ1 and σ3 axes with a trend of N316°E and N225°E, respectively. Stress orientations found here agree overall with the results from earlier studies based on smaller data sets. The directions of the maximum and minimum horizontal stresses inverted from focal mechanisms agree well with the stress field predicted by the European Stress Map. This confirms earlier interpretations that the stress field of the Rhine Graben system is controlled by plate driving forces acting on the plate boundaries. However, amplitudes of the stresses change on a local scale and with depth. Estimates of the absolute magnitude of principal stresses favor a normal faulting regime in the shallow crust (above 12-km depth) and a strike-slip regime in the lower crust. 相似文献
19.
The Ghouri area in southwest Iran exposes a cross section through the Zagros orogenic belt. The area provides an opportunity to investigate quantitative finite strain (Rs), kinematic vorticity number (Wk), proportions of pure shear and simple shear components, sense of shear indicators, steeply plunging lineations, and other moderate to steeply plunging stretching lineations in a transpressional zone. Based on a classical strain analysis of deformed microfossils with oblate strain ellipsoid shape, the Zagros orogenic belt is classified as a pure-shear dominated zone of transpression, but asymmetry of shear-sense indicators suggests that a significant component of simple shear was involved along the deformation zone boundaries. The long axes of the microfossils and stretched pebbles of a deformed conglomerate were used to indicate the stretching direction in this zone. The stretching lineations have a steep to moderate plunge but a constant strain magnitude. Characteristics of dextral inclined transpressional kinematics in the Zagros continental collision zone were quantified and indicate an estimated k-value < 1, an angle between the maximum horizontal axis of the instantaneous strain ellipsoid and the zone boundary (θ = 32°), asymmetrical dextral shear-sense indicators, and an angle of relative plate motion (α = 25°). 相似文献
20.
D. Legrand A. Calahorrano B. Guillier L. Rivera M. Ruiz D. Villagmez H. Yepes 《Tectonophysics》2002,344(1-2)
The phreatic activity and the subsequent dacitic dome growth in 1998–1999 at Guagua Pichincha volcano, Ecuador, were associated with two seismic swarms: one located in the northern part of Quito (population: 1,500,000) and another one, just below the active volcano, about 15–20 km SW from the first one. Quito swarm tectonic events have high frequencies (from 1 to 10–15 Hz). We registered more than 3200 events (among which 2354 events of 1.4≤ML≤4.2) between June 1998 and December 1999 at the −2- and −17-km depth. The volcanic events below the Guagua Pichincha caldera have high (from 1 to 10–15 Hz) and low (less than 3 Hz) frequencies. Approximately, 130,000 events were registered between September 1998 and December 1999 at the +2.4- and −3.5-km depth. Here, we study the stress tensors of these two swarms deduced from the polarities of P first motions and compare them to the regional stress tensor deduced from CMT Harvard focal mechanisms. The Quito swarm stress tensor is relatively close to the regional stress tensor (the σ1 axis was oriented N117°E close to the N102°E direction of the plate motion found by the GPS measurement, and σ3 is nearly vertical). The difference may be due to the action of the closely active Guagua Pichincha volcano. The Guagua Pichincha stress tensor is very different from the regional tectonic one. The σ1 axis of the volcano is oriented N214°E, almost perpendicular to the σ1 of the swarm of Quito and σ3 is almost horizontal. Even if these two tensors are different, they can be explained in a more general tectonic scheme. The almost horizontal direction of σ3 just below the volcano is compatible with an extensional horizontal direction that may be expected in the shallow extrados part of a compressional region and consistent with an opening of the top of the Guagua Pichincha volcano. The movement of the fluids (magma, gas and/or groundwater) produced by the closely active Guagua Pichincha volcano seems to have an influence in the acceleration of the generation of seismic events. 相似文献