首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到10条相似文献，搜索用时 125 毫秒
1.
The site amplification functions at 48 sites of NCR have been estimated in this study using the waveforms of locally recorded 23 earthquakes. Due to the absence of a suitable reference site in the region, the widely used horizontal-to-vertical spectral ratio (HVSR) technique has been used for this purpose. The maps showing the spatial distribution of predominant frequencies and the site amplifications at different frequencies corresponding to the natural frequencies of the different-storey buildings have been presented. The predominant frequencies in general are found to be in the range 2.5–7.5 Hz with an average of 4.4 Hz for the region having older alluvium sediments and in the range 1.1–6.4 Hz with an average of 3.3 Hz for the region with the younger alluvium deposits. The average value of the site amplifications for the frequency band 3.0–10.0 Hz is in the range 2.0–5.3 for the sites with significant soil cover, while the spectral amplification corresponding to the predominant frequency varies from 2.5 to 7.5 at most of the sites. The spectral amplification level lies in the range 2.0–3.0 for the sites with less or no sediment cover. The spectral amplification levels presented for the different-storey buildings may be used for the mitigation of seismic hazard in the region. The estimated site amplification functions may be used in the simulation of the site-specific strong ground motions and therefore useful for the evaluation of seismic hazard of a region.  相似文献   

2.
Site response in the Gujarat region is studied using local earthquake data recorded at 32 sites spread all over Gujarat region, India. Out of these 32 sites, 15 sites are located in Kachchh region, 8 in Saurashtra and 9 in mainland Gujarat region. These sites are underlain by different types of rocks/sediments of different ages. Out of 32 stations, 7 stations are on Quaternary deposits, 6 on Tertiary, 11 on Deccan, 3 on Jurassic, 3 on Cretaceous and 2 on Proterozoic rocks. The predominant frequencies at these sites depend strongly on the local geology. The average predominant frequencies of the sites on Quaternary sediments are 2.4?Hz, 5.3?Hz on Tertiary, 7.5?Hz on Jurassic, 7.2?Hz on Deccan, 4.6?Hz on Cretaceous and 7.5?Hz on Proterozoic formations. The average site amplification values at predominant frequencies are 3.7 for the sites of Quaternary deposits, 3.3 for Tertiary, 3.3 for Cretaceous rock, 4.2 for Deccan trap, 4.1 for Jurassic sites and 4.6 for Proterozoic. The damage to the houses during 2001 Bhuj earthquake is compared with the amplification at predominant frequencies at those sites. The spatial variation of predominant frequencies and the site amplifications at different frequencies corresponding to the natural frequencies of different storey buildings are studied, which will be useful in the evaluation of seismic hazard in the region.  相似文献   

3.
Singh  A. P.  Roy  Indrajit G.  Kumar  Santosh  Kayal  J. R. 《Natural Hazards》2013,77(1):33-49

Seismic source characteristics in the Kachchh rift basin and Saurashtra horst tectonic blocks in the stable continental region (SCR) of western peninsular India are studied using the earthquake catalog data for the period 2006–2011 recorded by a 52-station broadband seismic network known as Gujarat State Network (GSNet) running by Institute of Seismological Research (ISR), Gujarat. These data are mainly the aftershock sequences of three mainshocks, the 2001 Bhuj earthquake (M w 7.7) in the Kachchh rift basin, and the 2007 and 2011 Talala earthquakes (M w ≥ 5.0) in the Saurashtra horst. Two important seismological parameters, the frequency–magnitude relation (b-value) and the fractal correlation dimension (D c) of the hypocenters, are estimated. The b-value and the D c maps indicate a difference in seismic characteristics of these two tectonic regions. The average b-value in Kachchh region is 1.2 ± 0.05 and that in the Saurashtra region 0.7 ± 0.04. The average D c in Kachchh is 2.64 ± 0.01 and in Saurashtra 2.46 ± 0.01. The hypocenters in Kachchh rift basin cluster at a depth range 20–35 km and that in Saurashtra at 5–10 km. The b-value and D c cross sections image the seismogenic structures that shed new light on seismotectonics of these two tectonic regions. The mainshock sources at depth are identified as lower b-value or stressed zones at the fault end. Crustal heterogeneities are well reflected in the maps as well as in the cross sections. We also find a positive correlation between b- and D c-values in both the tectonic regions.

  相似文献   

4.
Seismic source characteristics in the Kachchh rift basin and Saurashtra horst tectonic blocks in the stable continental region (SCR) of western peninsular India are studied using the earthquake catalog data for the period 2006–2011 recorded by a 52-station broadband seismic network known as Gujarat State Network (GSNet) running by Institute of Seismological Research (ISR), Gujarat. These data are mainly the aftershock sequences of three mainshocks, the 2001 Bhuj earthquake (M w 7.7) in the Kachchh rift basin, and the 2007 and 2011 Talala earthquakes (M w ≥ 5.0) in the Saurashtra horst. Two important seismological parameters, the frequency–magnitude relation (b-value) and the fractal correlation dimension (D c) of the hypocenters, are estimated. The b-value and the D c maps indicate a difference in seismic characteristics of these two tectonic regions. The average b-value in Kachchh region is 1.2 ± 0.05 and that in the Saurashtra region 0.7 ± 0.04. The average D c in Kachchh is 2.64 ± 0.01 and in Saurashtra 2.46 ± 0.01. The hypocenters in Kachchh rift basin cluster at a depth range 20–35 km and that in Saurashtra at 5–10 km. The b-value and D c cross sections image the seismogenic structures that shed new light on seismotectonics of these two tectonic regions. The mainshock sources at depth are identified as lower b-value or stressed zones at the fault end. Crustal heterogeneities are well reflected in the maps as well as in the cross sections. We also find a positive correlation between b- and D c-values in both the tectonic regions.  相似文献   

5.
This paper presents a major extension of seismic vulnerability research project on the site of Trako??an Castle based on the initial horizontal-to-vertical-spectral-ratio (HVSR) results from Stanko et al. (2016). The estimated HVSR site frequencies and HV amplification at Trako??an Castle can only be used as an indication of the initial soil site frequency and amplification, so-called natural soil model, corresponding to the subsoil profile without the influence of an earthquake. The equivalent-linear (EQL) site response analysis has been carried out for different earthquake scenarios for a maximum input rock peak ground acceleration (PGAROCK) that corresponds to return periods of 95 (0.08 g), 475 (0.18 g) and 1000 years (0.31 g). The aim of the research is to evaluate structural seismic design responses and to determine type and degree of damage caused by local site effect, which is the result of an alluvial basin and topographic influences. The main objective of this research is the formation of local microseismic zones based on an EQL analysis: surface spectral acceleration and amplification maps at the predominant frequency. Based on the HVSR frequency response of the core structure of Trako??an Castle and the Tower itself (fundamental and higher frequency modes), maps of surface spectral acceleration and soil amplification at different frequencies (3, 5 and 10 Hz) are developed for different input PGAROCK levels (0.08, 0.18 and 0.31 g) to evaluate seismic response of the Castle. Observed amplifications are correlated with ground motion polarization and directionality of the ground motion from the alluvial basin to the hilltop. Shortening of predominant frequencies (lengthening of the period), particularly in the alluvial basin, has been observed with higher input PGAROCK in the EQL analysis. This effect is not manifested in the Trako??an hill, and predominant frequencies match HVSR frequencies. The use of certain geophysical survey methods at historical sites is a big problem, because terrain features (e.g. steep hills, mountains, ridges, slopes, cliffs) create lack of space and make it impossible to carry out geophysical investigation. Microtremor measurements at historical sites can overcome this limitation and provide local seismic response and vulnerability behaviour of historical monuments without destroying their authenticity. Also, computational modelling can greatly improve the results. The EQL site response analysis on the site of Trako??an Castle has confirmed and improved the results of seismic response and vulnerability based on HVSR method.  相似文献   

6.
The Surat City, which is the second most populated city in the state of Gujarat in western India, warrants site-specific seismic hazard assessment due to its rapid urbanization and proximity to major seismogenic zones. This study reports results of microtremor investigations at 72 single stations and 4 arrays in an area of 325 km2 spanning the city. The resonant frequencies, associated peak amplification values and liquefaction vulnerability indices were deduced from the horizontal to vertical spectral ratios. Ground amplification (AHVSR) in the range of 3.0–5.0 was observed in the 2.0–4.0-Hz frequency band at most of the sites. A secondary AHVSR between 2.0 and 3.0 is also observed in the 6.0–7.0-Hz frequency band at a few sites. Locales that are most susceptible to liquefaction are identified based on their vulnerability index (K g) exceeding the value of 10. The shear wave velocities (V s) ≥ 500 m/s inferred from array measurements occur at 38 m depth in the western part and ~16 m depth in the eastern part of city. The response spectra estimated from strong motion data recorded at an accelerograph site in Surat from three earthquakes of M w ≥ 3.2 that occurred in Kachchh, Saurashtra and Narmada regions are in accordance with our inferences of characteristic site frequencies and amplification. Our results, in agreement with the damage scenario during the 2001 Bhuj earthquake, provide valuable inputs for site-specific seismic hazard evaluation of the Surat City.  相似文献   

7.
Geological, geomorphological and tectonic element studies of the Kachchh region have been carried out and correlation between them with the seismic data has been attempted. Study and analysis of Bhuj region using various remote sensing techniques including surface temperature changes, InSAR studies and GPS have also been attempted to identify earthquake precursors on different scales and the areas susceptible to damage or disaster on different degrees. The Kachchh region is located in Mesozoic rift environment that was earlier characterized by tensional stresses, but present-day compressive stress regime suggests that this region is undergoing a stage of inversion tectonics. The present work aims at the application of remote sensing techniques in developing a long-term precursor in the form of landscape changes, before the occurrence of a major earthquake as a result of crustal stress accumulation. It is, therefore, necessary to find out with the help of other precursors whether or not the area is accumulating stress. A minute observation of all the acquired multi-temporal imageries could demarcate minute geomorphological changes in this region, for example, shifting of drainage patterns since the development of paleochannels, slow upliftment/depressions, etc. Moreover, a distinct change in temperature (~5 to 6 °C) could be observed on April 6, 2006, and again on April 10, 2006, in the Kachchh region before the occurrence of tremor, particularly along the Kachchh Mainland Fault, indicating that such tremor generates sufficient stress before the earthquake particularly along the fault line. b values study over the region during last 50 years has also clearly indicated the drastic stress changes particularly before the occurrence of a big earthquake. GPS observations have also indicated a major thrust region lying along ENE–WSW with stress alignment along ENE–WSW. The region on the west of the Kachchh Mainland Fault and the South Wagad Fault can be called as seismic gap region as very few major earthquakes have taken place in this region.  相似文献   

8.
New empirical relations are derived for source parameters of the Koyna–Warna reservoir-triggered seismic zone in Western India using spectral analysis of 38 local earthquakes in the magnitude range M L 3.5–5.2. The data come from a seismic network operated by the CSIR-National Geophysical Research Institute, India, during March 2005 to April 2012 in this region. The source parameters viz. seismic moment, source radius, corner frequency and stress drop for the various events lie in the range of 1013–1016 Nm, 0.1–0.4 km, 2.9–9.4 Hz and 3–26 MPa, respectively. Linear relationships are obtained among the seismic moment (M 0), local magnitude (M L), moment magnitude (M w), corner frequency (fc) and stress drop (?σ). The stress drops in the Koyna–Warna region are found to increase with magnitude as well as focal depths of earthquakes. Interestingly, accurate depths derived from moment tensor inversion of earthquake waveforms show a strong correlation with the stress drops, seemingly characteristic of the Koyna–Warna region.  相似文献   

9.
Mandal  Prantik 《Natural Hazards》2022,111(1):239-260
Natural Hazards - Local earthquake seismic tomography of the Kachchh rift zone (India) using arrival times of P- and S-waves detect a semi-circular region of lower seismic velocities (8–15%...  相似文献   

10.
This paper examines the variability of seismic activity observed in the case of different geological zones of peninsular India (10°N–26°N; 68°E–90°E) based on earthquake catalog between the period 1842 and 2002 and estimates earthquake hazard for the region. With compilation of earthquake catalog in terms of moment magnitude and establishing broad completeness criteria, we derive the seismicity parameters for each geologic zone of peninsular India using maximum likelihood procedure. The estimated parameters provide the basis for understanding the historical seismicity associated with different geological zones of peninsular India and also provide important inputs for future seismic hazard estimation studies in the region. Based on present investigation, it is clear that earthquake recurrence activity in various geologic zones of peninsular India is distinct and varies considerably between its cratonic and rifting zones. The study identifies the likely hazards due to the possibility of moderate to large earthquakes in peninsular India and also presents the influence of spatial rate variation in the seismic activity of this region. This paper presents the influence of source zone characterization and recurrence rate variation pattern on the maximum earthquake magnitude estimation. The results presented in the paper provide a useful basis for probabilistic seismic hazard studies and microzonation studies in peninsular India.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号