首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 250 毫秒
1.
Thermokarst lakes are a major heat source for the adjacent permafrost and a significant source of atmospheric methane. These lakes have important impacts on the physical, chemical, biological, geomorphological and hydrological processes occurring in the ground under and around thermokarst lakes, and seriously affect the local environment and the stability of the structures constructed in permafrost regions. Numerical simulation methods provide an effective method for quantitative analysis of the long-term impact of thermokarst lakes and their evolution on permafrost surrounding the lakes, and have deepened our knowledge about the impact of thermokarst lakes immensely. Summarizing the research progresses in numerical simulation of long-term impact of thermokarst lakes on thermal regime of surrounding permafrost has an important guiding function to improve mathematical models and develop more effective models. In this study, the components, functions, advantages and defects of several typical mathematical models having developed over the past ten years or so were reviewed, such as the heat conduction model with phase change, thaw slumping model, the coupled lake-permafrost model, thaw lake expansion model combining thermal processes with mass wasting and thaw-driven subsidence, the coupled heat conduction and moisture migration model, and the moving mesh method based thermokarst lake dynamic evolution model. Several issues deserving to be paid further attention in the future researches were proposed, including creating more effective models, determining the more realistic initial condition, lucubrating thermal and physical parameters of the typical soils, consider the impact of lake water replenishment, quantitative analysis of the thermal effect of supra-permafrost water flow around the thermokarst lakes, creating the coupled governing equation of heat conduction with phase change and convective heat transfer, embed ding the effect of climate warming in the model, numerical investigation of the long-term influence of thermokarst lake drainage on the environment change in permafrost regions, analyzing the long-term joint impact of multiple lakes on adjacent permafrost, simulating the near-shore talik development process and feature beneath shallow water in expanding thermokarst lakes, and continuing to do the systemic and comprehensive field measurements.  相似文献   

2.
令锋  吴青柏 《冰川冻土》2017,39(2):328-335
热融湖是高纬度和高海拔富冰多年冻土区重要的自然景观。这些湖由于富冰多年冻土或地下冰的融化而形成,由于湖水向周边多年冻土传递热量而持续扩张。以青藏高原北麓河地区一个热融湖的信息和冻土监测资料为基础,运用柱坐标系下伴有相变的热传导模型模拟了以不同的横向扩张速率演化的热融湖湖下融区的发展过程。结果表明：在青藏高原多年冻土厚度为75 m的北麓河盆地,分别以横向扩张速率0.10 m·a-1、0.15 m·a-1、0.20 m·a-1和0.25 m·a-1演化的热融湖,在湖形成分别达760 a、703 a、671 a和652 a时,湖下形成贯通融区,相应的多年冻土从上向下融化的平均速率分别为8.22 cm·a-1,8.89 cm·a-1,9.31 cm·a-1和9.74 cm·a-1。热融湖的横向扩张速率对湖下的融区发展和土壤热状况有重要的影响,在现场调查资料的基础上选取正确的热融湖横向扩张速率是热融湖对多年冻土热状况作用数值模拟研究的必要前提。  相似文献   

3.
《Quaternary Science Reviews》2007,26(5-6):743-758
Detailed examination of the Tekapo Formation in the Tasman Valley, New Zealand has identified 20 facies, and five facies associations. These associations are delta foresets and bottomsets, sediment density flows, ice-contact lake sediments with ice-rafted debris and resedimentation deposits, and outwash gravels. Interpretation of the sediment-landform associations informed by observations at modern glacier termini suggests that the Late Pleistocene Tekapo Formation moraines have been formed by downwasting of a more expanded Tasman Glacier. During the early stages of glacier retreat, ponds on the glacier surface develop into thermokarst lakes which enlarge and coalesce to form a large supraglacial lake. Continued downwasting causes the lake outlet river to entrench into the impounding latero-frontal ice-cored moraine, lowering the lake level. This exposes lake-bottom sediments and forms shorelines on the proximal slopes of the ice-cored moraine. As the ice-cored moraine melts, these lake sediments are deformed and deposited against the Mt. John moraine. The observations and interpretations reported here suggest the Late Pleistocene end moraine is a constructional feature not a structural (glaciotectonic) feature as suggested by previous studies.  相似文献   

4.
Quaternary sedimentary successions are described from the Linda Valley, a small valley in western Tasmania that was dammed by ice during Early and Middle Pleistocene glaciations. Mapping and logging of exposures suggest that an orderly sequence of deposits formed during ice incursion, occupation and withdrawal from tributary valleys. Four principal sediment assemblages record different stages of ice occupation in the valley. As the glacier advanced, a proglacial, lacustrine sediment assemblage dominated by laminated silts and muds deposited from suspension accumulated in front of the glacier. A subglacial sediment assemblage consisting of deformed lacustrine deposits and lodgement till records the overriding of lake-bottom sediments as the glacier advanced up the valley into the proglacial lake. As the glacier withdrew from the valley, a supraglacial sediment assemblage of diamict, gravel, sand and silt facies formed on melting ice in the upper part of the valley. A lacustrine regression in the supraglacial assemblage is inferred on the basis of a change from deposits mainly resulting from suspension in a subaqueous setting to relatively thin and laterally discontinuous laminated sediments, occurrence of clastic dykes, and increasing complexity of the geometry of deposits that indicate deposition in a subaerial setting. A deltaic sediment assemblage deposited during the final stage of ice withdrawal from the valley consists of steeply dipping diamict and normally graded gravel facies formed on delta foresets by subaqueous sediment gravity flows. The sediment source for the delta, which prograded toward the retreating ice margin, was the supraglacial sediment assemblage previously deposited in the upper part of the valley. A depositional model developed from the study of the Linda Valley may be applicable to other alpine glaciated areas where glaciers flowed through or terminated in medium- to high-relief topography.  相似文献   

5.
The Chippewa and Wisconsin Valley Lobes of the Laurentide Ice Sheet reached their maximum extent in north-central Wisconsin about 20 000 years ago. Their terminal positions are marked by a broad area of hummocky topography, containing many ice-walled-lake plains, which is bounded on the up-ice and down-ice sides by ice-contact ridges and outwash fans. The distribution of these ice-disintegration landforms shows that a wide zone of stagnant, debris-covered, debris-rich ice separated from the active margins of both lobes as they wasted northward during deglaciation. Accumulation of thick, uncollapsed sediment in ice-walled lakes high in the ice-cored landscape indicates a period of stability. In contrast, hummocky disintegration topography indicates unstable conditions. Thus, we interpret two phases of late-glacial landscape evolution. During the first phase, ice buried beneath thick supraglacial sediment was stable. Supraglacial lakes formed on the ice surface and some melted their way to solid ground and formed ice-walled lakes. During the second phase, buried ice began to melt rapidly, hummocky topography formed by topographic inversion, and supraglacial and ice-walled lakes drained. We suggest that ice wastage was controlled primarily by climatic conditions and supraglacial-debris thickness. Late-glacial permafrost in northern Wisconsin likely delayed wastage of buried ice until after about 13 000 years ago, when climate warmed and permafrost thawed.  相似文献   

6.
热融滑塌是山地多年冻土退化最直接的表现形式之一,通过解译祁连山俄博岭地区遥感影像,结合实地考察,对俄博岭热融滑塌的空间分布和时间变化进行了研究,明确了热融滑塌的发育特征。结果表明,俄博岭热融滑塌发育活跃,1997~2015年热融滑塌数量增加(11~13个),面积增大(7765~20605m^2),其中1997~2009年面积增加速率为679.9m^2/a,2009~2015年面积增加速率为780.2m^2/a。通过分析热融滑塌景观分布与地形因子的关系,发现俄博岭热融滑塌在海拔3570~3700m,坡度3°~10°的富冰多年冻土区北向斜坡发育;通过对典型热融滑塌溯源后退速率分析发现,1997~2009年其平均后退速率为2m/a,2009~2015年平均后退速率为5m/a,呈明显增大趋势,且其后退速率主要与坡度、地下冰含量和地表径流相关。  相似文献   

7.
The macro‐ and micro‐sedimentology of a supraglacial melt‐out till forming at the Matanuska Glacier was examined in relationship to the properties of the stratified basal zone ice and debris from which it is originating. In situ melting of the basal ice has produced a laminated to bedded diamicton consisting mainly of silt. Macroscopic properties include: discontinuous laminae and beds; lenses of sand, silt aggregates and open‐work gravel; deformed and elongate clasts of clay; widely dispersed pebbles and cobbles, those that are prolate usually with their long axes subparallel to parallel to the bedding. Evidence for deformation is absent except for localized bending of beds over or under rock clasts. Microscopic properties are a unique element of this work and include: discontinuous lineations; silt to granule size laminae; prolate coarse sand and rock fragments commonly with their long axis subparallel to bedding; subangular to subrounded irregular shaped clay clasts often appearing as bands; sorted and unsorted silt to granule size horizons, sometimes disrupted by pore‐water pathways. Limited deformation occurs around rock clasts and thicker parts of lamina. This study shows that in situ melting of debris‐rich basal ice can produce a laminated and bedded diamicton that inherits and thereby preserves stratified basal ice properties. Production and preservation of supraglacial melt‐out till require in situ melting of a stagnant, debris‐rich basal ice source with a low relief surface that becomes buried by a thick, stable, insulating cover of ice‐marginal sediment. Also required are a slow melt rate and adequate drainage to minimize pore‐water pressures in the till and overlying sediment cover to maintain stability and uninterrupted deposition. Many modern and ancient hummocky moraines down glacier of subglacial overdeepenings probably meet these process criteria and their common occurrence suggests that both modern and pre‐modern supraglacial melt‐out tills may be more common than previously thought.  相似文献   

8.
Laminated glacimarine sediments are observed in visual core logs and x-radiographs from Scoresby Sund and Nansen Fjord, east Greenland. They are mostly underlain and overlain by massive or stratified glacimarine diamicton (Dmm or Dms), which is a product of iceberg delivery of heterogeneous debris and, in Scoresby Sund, reworking by deep-drafted iceberg keels. The laminated sediments are AMS radiocarbon dated to two cold periods since the last, Late Weichselian deglaciation: the Younger Dryas stadial (Milne Land Stadial in east Greenland) and the Little Ice Age. During cold climatic events, multiyear shorefast sea ice ('sikussak') formed in these fjords and trapped the icebergs. Fine-grained, laminated muds (Fl) were deposited in Scoresby Sund when the flux of icebergs was suppressed, but turbid meltwater continued to provide some sediment flux to the fjord systems, varying through time to produce laminations. In Nansen Fjord, thinner and often massive mud layers (Fm) resulted from shorter intervals of sea-ice cover with no ice rafting. Stratified diamicton layers (Dms), which alternate with mud deposition to produce a laminated unit, probably represent intervening times of more open conditions with iceberg rafting. In Scoresby Sund, foraminifera are either absent from the laminated unit or begin to appear towards the end of its deposition. The absence of both benthic and planktonic foraminifera also suggests that multiyear sea ice was covering the core sites. There is no evidence of macrofaunal activity, and bioturbation is absent from the laminated sediments. Satellite data show that multiyear shorefast sea ice is present in several areas of the high Arctic today, and this traps icebergs calved from interior ice-cap drainage basins. Thus, the process of laminated glacimarine sediment formation is likely to be applicable to a number of areas of the modern and Quaternary Arctic.  相似文献   

9.
The Kuannersuit Glacier surged 11 km between 1995 and 1998. The surge resulted in the formation of an ice cored thrust moraine complex constructed by subglacial and proglacial glaciotectonic processes. Four main thrust zones are evident in the glacier snout area with phases of compressional folding and thrusting followed by hydrofracture in response to the build-up of compressional stresses and the aquicludal nature of submarginal permafrost and naled. Various types of stratified debris-rich ice facies occur within the marginal zone: The first (Facies I) comprises laterally continuous strata of ice with sorted sediment accumulations, and is reworked and thrust naled ice. The second is laterally discontinuous stratified debris-rich ice with distinct tectonic structures, and is derived through subglacial extensional deformation and localised regelation (Facies II), whilst the third type is characterised by reworked and brecciated ice associated with the reworking and entrainment of meteoric ice (Facies III). Hydrofracture dykes and sills (Facies IV) cross-cut the marginal ice cored thrust moraines, with their sub-vertically frozen internal contact boundaries and sedimentary structures, suggesting supercooling operated as high-pressure evacuation of water occurred during thrusting, but this is not related to the formation of basal stratified debris-rich ice. Linear distributions of sorted fines transverse to ice flow, and small stratified sediment ridges that vertically cross-cut the ice surface up-ice of the thrust zone relate to sediment migration along crevasse traces and fluvial infilling of crevasses. From a palaeoglaciological viewpoint, marginal glacier tectonics, ice sediment content and sediment delivery mechanisms combine to control the development of this polythermal surge valley landsystem. The bulldozing of proglacial sediments and the folding and thrusting of naled leads to the initial development of the outer zone of the moraine complex. This becomes buried in bulldozed outwash sediment and well-sorted fines through surface ablation of naled. Up-ice of this, the heavily thrust margin becomes buried in sediment melted out from basal debris-rich ice and subglacial diamicts routed along thrusts. These mechanisms combine to deliver sediment to supraglacial localities, and promote the initial preservation of structurally controlled moraines through insulation, and the later development of kettled dead ice terrain.  相似文献   

10.
Thermokarst lakes are a widespread feature of the Arctic tundra, in which highly dynamic processes are closely connected with current and past climate changes. We investigated late Quaternary sediment dynamics, basin and shoreline evolution, and environmental interrelations of Lake El'gene‐Kyuele in the NE Siberian Arctic (latitude 71°17′N, longitude 125°34′E). The water‐body displays thaw‐lake characteristics cutting into both Pleistocene Ice Complex and Holocene alas sediments. Our methods are based on grain size distribution, mineralogical composition, TOC/N ratio, stable carbon isotopes and the analysis of plant macrofossils from a 3.5‐m sediment profile at the modern eastern lake shore. Our results show two main sources for sediments in the lake basin: terrigenous diamicton supplied from thermokarst slopes and the lake shore, and lacustrine detritus that has mainly settled in the deep lake basin. The lake and its adjacent thermokarst basin rapidly expanded during the early Holocene. This climatically warmer than today period was characterized by forest or forest tundra vegetation composed of larches, birch trees and shrubs. Woodlands of both the HTM and the Late Pleistocene were affected by fire, which potentially triggered the initiation of thermokarst processes resulting later in lake formation and expansion. The maximum lake depth at the study site and the lowest limnic bioproductivity occurred during the longest time interval of ～7 ka starting in the Holocene Thermal Maximum and lasting throughout the progressively cooler Neoglacial, whereas partial drainage and an extensive shift of the lake shoreline occurred ～0.9 cal. ka BP. Correspondingly, this study discusses different climatic and environmental drivers for the dynamics of a thermokarst basin.  相似文献   

11.
This paper focuses on the structural glaciology, dynamics, debris transport paths and sedimentology of the forefield of Soler Glacier, a temperate outlet glacier of the North Patagonian Icefield in southern Chile. The glacier is fed by an icefall from the icefield and by snow and ice avalanches from surrounding mountain slopes. The dominant structures in the glacier are ogives, crevasses and crevasse traces. Thrusts and recumbent folds are developed where the glacier encounters a reverse slope, elevating basal and englacial material to the ice surface. Other debris sources for the glacier include avalanche and rockfall material, some of which is ingested in marginal crevasses. Debris incorporated in the ice and on its surface controls both the distribution of sedimentary facies on the forefield and moraine ridge morphology. Lithofacies in moraine ridges on the glacier forefield include large isolated boulders, diamictons, gravel, sand and fine-grained facies. In relative abundance terms, the dominant lithofacies and their interpretation are sandy boulder gravel (ice-marginal), sandy gravel (glaciofluvial), angular gravel (supraglacial) and diamicton (basal glacial). Proglacial water bodies are currently developing between the receding glacier and its frontal and lateral moraines. The presence of folded sand and laminites in moraine ridges in front of the glacier suggests that, during a previous advance, Soler Glacier over-rode a former proglacial lake, reworking lacustrine deposits. Post-depositional modification of the landform/sediment assemblage includes melting of the ice-core beneath the sediment cover, redistribution of finer material across the proglacial area by aeolian processes and fluvial reworking. Overall, the preservation potential of this landform/sediment assemblage is high on the centennial to millennial timescale.  相似文献   

12.
Massive ice incorporating till beds and scattered erratic clasts exposed in a bimodal thaw slide displayed an association with the surrounding fluvioglacial and flow-till facies indicative of a consanguineous relationship. The massive ice cores a low ridge interpreted as a recessional moraine feature paralleling the Last Glacial Maximum advance limit. Both ice and sand wedges penetrate the massive ice and their tops are truncated by a thaw unconformity overlain by a diamicton. In a permafrost environment, relict glacial ice can persist for many millennia, and the timing of the thaw is largely determined by the vagaries of erosional processes. The age of related kettle landforms can display considerable diachronism.  相似文献   

13.
The Mackenzie Delta is a large fine‐grained delta deposited in a cold arctic setting. The delta has been constructed upon a flooding surface developed on a previous shelf‐phase delta. There are three principal depositional zones: the subaerial delta plain, the distributary channel mouth region and the subaqeous delta. The subaerial delta plain is characterized by an anastomosing system of high‐sinuosity channels and extensive thermokarst lake development. This region is greatly influenced by the annual cycle of seasonal processes including winter freezing of sediments and channels, ice‐jamming and flooding in the early spring and declining river stage during the summer and autumn. Deposition occurs on channel levees and in thermokarst lakes during flood events and is commonly rhythmic in nature with discrete annual beds being distinguishable. In the channel mouth environment, deposition is dominated by landward accretion and aggradation of mouth bars during river‐ and storm surge‐induced flood events. The subaqeous delta is characterized by a shallow water platform and a gentle offshore slope. Sediment bypassing of the shallow‐water platform is efficient as a result of the presence of incised submarine channels and the predominance of suspension transport of fine‐grained sediments. Facies of the shallow platform include silty sand with climbing ripple lamination. Offshore facies are dominated by seaward‐fining fine sand to silt tempestites. Sea‐ice scouring and sediment deformation are common beyond 10 m water depth where bioturbated muds are the predominant facies. The low angle profile of the shallow‐water platform is interpreted to be the combined response of a fine‐grained delta to (1) storm sediment dispersal; (2) autoretreat as a result of the increasing subaerial and subaqeous area of deposition as the delta progrades out of its glacial valley; (3) limited water depth above the underlying flooding surface; and (4) efficient nearshore bypassing of sediment through subice channels at the peak of spring discharge. Several indicators of the cold climate can be used as criteria for the interpretation of ancient successions, including thermokarst lake development, submarine channel scours, freeze–thaw deformation and ice‐scour deformation structures. Permafrost inhibits compaction subsidence and, together with the shallow‐water setting, also limits autocyclic lobe switching. The cold climate can thus influence stratal architecture by favouring the development of regional‐scale clinoform sets rather than multiple, smaller scale lobes separated by autocyclic flooding surfaces.  相似文献   

14.
青藏高原多年冻土区两类低角度滑坡灾害形成机理探讨   总被引：10，自引：0，他引：10  
青藏高原多年冻土区发育的两类低角度滑坡--融冻泥流和热融滑塌是冻融循环条件下特殊的斜坡失稳类型,在广大的非冻土地区一般很难见到这种低角度的滑坡类型。探讨了两类低角度滑坡灾害的形成机理,即质点迁移效应和滞水润滑效应。以摩尔-库仑强度准则为理论基础,应用所推导的沿坡面平行方向渗流条件下安全系数的统一形式,对青藏公路k3035里程热融滑塌体稳定性进行了分析评价,验证了活动层沿厚层地下冰面滑动的“滞水润滑效应”。从环境工程地质学的观点出发,针对热融滑塌这种可控的滑坡地质灾害,提出了基于保护冻土原则的具体的防治措施。  相似文献   

15.
Lower Pleistocene sediments recovered in boreholes from the Aberdeen Ground Formation in the central North Sea indicate that the unit was deposited in a delta front to prodelta/shallow, open shelf marine setting. Possible estuarine and clastic nearshore marine deposits have been identified on the western margin of the basin. The delta front sediments consist of interbedded, structureless to laminated sands and muds with organic debris, ferruginous nodules and common soft sediment deformation structures. Sporadic rippled and graded beds, basal scours to beds and starved ripples suggest periodic wave–current reworking. Prodelta/shelf marine sediments are predominantly argillaceous with only occasional thin sand beds and rare phosphatic bands. One exceptionally thick sand body or submarine channel-fill although this remains uncertain. The estuarine/clastic nearshore marine sediments include coarse channel-lag deposits and rippled and laminated subtidal sands. A rich microfossil assemblage recovered from the prodelta/shelf marine sequence indicates that deposition occurred under fluctuating climatic conditions.  相似文献   

16.
The distribution of permafrost-related slope failures along the Qinghai-Tibet Highway from Wuddaoliang to Fenghuoshan correlates with ice content, slope gradient, and ground temperature. Slope failures are of two types. (1) Retrogressive thaw slumps result from icy permafrost being exposed by either man-induced excavation or fluvial-thermal erosion and undercutting of basal slopes. (2) Active-layer-detachment failures are caused by thaw of icy permafrost at the active layer-permafrost interface. After initial failure, active-layer-detachment failures can lead to retrogressive thaw-slumping and localized surficial landslide. Common trigger mechanisms for failure include high summer air temperatures and heavy summer precipitation. A third possible trigger mechanism for slope failure is earthquake occurrence. A geotechnical slope stability analysis was undertaken for an active-layer-detachment failure that had progressed into a retrogressive thaw slump. A safety factor (F s ) of 1.24 for the natural slope was determined using in situ tested strength parameters. However, the slope would lose stability when either the groundwater level over the permafrost table exceeded 1.42 m or seismic acceleration reached, or exceeded, 0.03?g.  相似文献   

17.
Knight, J. 2010: Subglacial processes and drumlin formation in a confined bedrock valley, northwest Ireland. Boreas, 10.1111/j.1502‐3885.2010.00182.x. ISSN 0300‐9483. Subglacial processes beneath the Late Weichselian ice sheet in northwest Ireland are deduced from sediments and structures within drumlins in a bedrock valley at Loughros Beg, County Donegal. Here, a glacially smoothed bedrock surface underlies the drumlins, which are composed on their up‐ice side of stacked, angular rafts of local bedrock. Overlying and down‐ice from these rafts are down‐ice‐dipping beds of massive to bedded diamicton that contain sand and gravel interbeds. In a down‐ice direction the diamicton matrix coarsens and the beds become laterally transitional to water‐sorted gravels. The down‐ice end of one drumlin shows a concentrically bedded stratified gravel core aligned parallel to ice flow and resembling the internal structure of an esker. With distance away from this core, the gravels become more poorly sorted with an increase in matrix content, and are transitional to massive to stratified diamicton. A four‐stage model describes the formation of drumlins in this sediment‐poor setting. The sediments that are located directly above the bedrock represent deposition in a semi‐enclosed subglacial cavity. A trigger for this process was the formation of subglacial relief by the thrusting up of bedrock rafts, which created the leeside cavity. Subsequent sediment deposition into this cavity represents a form of feedback (self‐regulation), which may be a typical characteristic of subglacial processes in sediment‐poor settings.  相似文献   

18.
An extensive stratigraphic section at Cape Alfred Ernest on the Wootton Peninsula, northwest Ellesmere Island contains six lithofacies which appear to record two glacial phases separated by an organic layer. (1) A lower massive gravel records a pre-ice advance outwash phase; (2) massive fine-grained sediments record a period of non-glacial marine deposition when sea-level was higher than present; (3) a massive diamicton records the advance of ice across the site; (4) intermediate stratified beds record supraglacial and proglacial outwash, and include an organic layer; (5) massive diamicton grading down-valley to stratified diamicton and then massive, sheared diamicton, overlain by laminated fine-grained sediments with dropstones, recording the last (late Wisconsinan) glaciation; (6) upward-coarsening sands and gravels record proglacial outwash and grade to raised marine deltas. Radiocarbon dates of 39270 ± 640 and > 51000 yr BP were obtained on samples from the organic layer by accelerator mass spectrometry and conventional radiocarbon dating, respectively. Palaeoecological data suggest that the organics accumulated in a wet sedge meadow environment when the climate was warmer than present. Stratigraphic considerations suggest that the organic layer represents an interglacial interval which, if valid, indicates that the site constitutes the northernmost interglacial stratigraphy in the Canadian Arctic. Alternatively, the organic layer may date to Plio-Pleistocene times.  相似文献   

19.
Terminal-moraine ridges up to 6 m high have been forming at the snout of Styggedalsbreen for two decades. Based on intermittent observations during this period, combined with a detailed study of ridge morphology, sedimentary structures and composition during the 1993 field season, a model of terminal-moraine formation that involves the interaction of glacial and glacio-fluvial processes at a seasonally oscillating ice margin is presented. In winter, subglacial debris is frozen-on to the glacier sole; in summer, ice-marginal and supraglacial streams deposit sediments on the wasting ice tongue. The ice tongue overrides an embryonic moraine ridge during a late-winter advance and a double layer of sediment (diamicton overlain by sorted sands and gravels) is added to the moraine ridge during the subsequent ablation season. Particular ridges grow incrementally over many years and exert positive feedback by enhancing snout up-arching during the winter advance and constraining the course of summer meltwater streams close to the ice margin. The double-layer annual-meltout model is related to moraine formation by the stacking of subglacial frozen-on sediment slabs (Krüger 1993). Moraine ridges of this type have a complex origin. are not push moraines, and may be characteristic of dynamic high-latitude and high-altitude temperate glaciers.  相似文献   

20.
Subglacial landsystems in and around Okanagan Valley, British Columbia, Canada are investigated in order to evaluate landscape development, subglacial hydrology and Cordilleran Ice Sheet dynamics along its southern margin. Major landscape elements include drumlin swarms and tunnel valleys. Drumlins are composed of bedrock, diamicton and glaciofluvial sediments; their form truncates the substrate. Tunnel valleys of various scales (km to 100s km length), incised into bedrock and sediment, exhibit convex longitudinal profiles, and truncate drumlin swarms. Okanagan Valley is the largest tunnel valley in the area and is eroded >300 m below sea level. Over 600 m of Late Wisconsin-age sediments, consisting of a fining-up sequence of cobble gravel, sand and silt fill Okanagan Valley. Landform–substrate relationships, landform associations, and sedimentary sequences are incompatible with prevailing explanations of landsystem development centred mainly on deforming beds. They are best explained by meltwater erosion and deposition during ice sheet underbursts.During the Late-Wisconsin glaciation, Okanagan Valley functioned as part of a subglacial lake spanning multiple connected valleys (few 100s km) of southern British Columbia. Subglacial lake development started either as glaciers advanced over a pre-existing sub-aerial lake (catch lake) or by incremental production and storage of basal meltwater. High geothermal heat flux, geothermal springs and/or subglacial volcanic eruptions contributed to ice melt, and may have triggered, along with priming from supraglacial lakes, subglacial lake drainage. During the underburst(s), sheetflows eroded drumlins in corridors and channelized flows eroded tunnel valleys. Progressive flow channelization focused flows toward major bedrock valleys. In Okanagan Valley, most of the pre-glacial and early-glacial sediment fill was removed. A fining-up sequence of boulder gravel and sand was deposited during waning stages of the underburst(s) and bedrock drumlins in Okanagan Valley were enhanced or wholly formed by this underburst(s).Subglacial lake development and drainage had an impact on ice sheet geometry and ice volumes. The prevailing conceptual model for growth and decay of the CIS suggests significantly thicker ice in valleys compared to plateaus. Subglacial lake development created a reversal of this ice sheet geometry where grounded ice on plateaus thickened while floating valley ice remained thinner (due to melting and enhanced sliding, with significant transfer of ice toward the ice sheet margin). Subglacial lake drainage may have hastened deglaciation by melting ice, lowering ice-surface elevations, and causing lid fracture. This paper highlights the importance of ice sheet hydrology: its control on ice flow dynamics, distribution and volume in continental ice masses.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号