首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Deposits and transport processes resulting from the resedimentation of cold, unconsolidated ignimbrite into water were simulated by flume experiments. The ignimbrite sample used was poorly sorted (σ = 2·4–3), fine ash‐rich (< 63 μm, 17–30 wt%) and included both dense lithic clasts (> 2000 kg m?3) and pumice (500 to ca 1300 kg m?3). As a result of the binding forces of the ash matrix, the experiments involved resedimentation from a steep front onto the floor (with or without an initial ramp) of the water‐filled tank under both still and wave‐generated conditions. Larger discrete collapse events were induced by oversteepening the sample front and by undercutting from wave action. The mass of the collapse and proportion of pore–space water strongly influenced the style of resedimentation and the deposits. Initial collapse events were from the top of the steep front and fell onto the floor. The largest, densest clasts were deposited as a lithic lag in a proximal sediment wedge or rolled down to a break‐in‐slope. Fine ash was transported in dilute turbidity currents, and coarse unsaturated pumice clasts floated off. Moderate collapse events generated high‐density turbidity currents, trapping pumice in the flow, causing them to saturate. These low‐density pumice clasts were easily remobilized by wave activity and passing currents and accumulated on the gentle slope at the bottom of the resedimented deposit. Large collapse events slumped, producing poorly sorted mounds similar in texture to the original starting material. As the matrix of the ignimbrite sample became saturated with water, moderate and large collapse events generated debrisflows and slurries that deposited massive, poorly sorted deposits. Furthermore, once more gentle slopes were established between the sample and deposit, small cascading grainflows deposited lithic clasts on the upper slopes and levees of pumice at the terminus of low‐relief, ash channels. The experiments show that, excluding large collapse events and debrisflows, resedimenting ignimbrite in water is effective at segregating low‐density pumice clasts from dense lithic clasts and fine ash. Experiments using fine‐ash poor ignimbrite and well‐sorted quartz sand for comparison formed an inherently unstable initial steep front that immediately collapsed by continuous grain avalanches. The grainflow deposits had textures similar to the fines‐poor starting material.  相似文献   

2.
Sedimentation and welding processes of the high temperature dilute pyroclastic density currents and fallout erupted at 7.3 ka from the Kikai caldera are discussed based on the stratigraphy, texture, lithofacies characteristics, and components of the resulting deposits. The welded eruptive deposits, Unit B, were produced during the column collapse phase, following a large plinian eruption and preceding an ignimbrite eruption, and can be divided into two subunits, Units Bl and Bu. Unit Bl is primarily deposited in topographic depressions on proximal islands, and consists of multiple thin (< 1 m) flow units with stratified and cross-stratified facies with various degrees of welding. Each thin unit appears as a single aggradational unit, composed of a lower lithic-rich layer or pod and an upper welded pumice-rich layer. Lithic-rich parts are fines-depleted and are composed of altered country rock, fresh andesite lava, obsidian clasts with chilled margins, and boulders. The overlying Unit Bu shows densely welded stratified facies, composed of alternating lithic-rich and pumice-rich layers. The layers mantle lower units and are sometimes viscously deformed by ballistics. The sedimentary characteristics of Unit Bl such as welded stratified or cross-stratified facies indicate that high temperature dilute pyroclastic density currents were repeatedly generated from limited magma-water interactions. It is thought that dense brittle particles were segregated in a turbulent current and were immediately buried by deposition of hot, lighter pumice-rich particles, and that this process repeated many times. It is also suggested that the depositional temperature of eruptive materials was high and the eruptive style changed from a normal plinian eruption, through surge-generating explosions (Unit Bl), into an agglutinate-dominated fallout eruption (Unit Bu). On the basis of field data, welded pyroclastic surge deposits could be produced only under specific conditions, such as (1) rapid accumulation of pyroclastic particles sufficiently hot to weld instantaneously upon deposition, and (2) elastic particles' interactions with substrate deformation. These physical conditions may be achieved within high temperature and highly energetic pyroclastic density currents produced by large-scale explosive eruptions.  相似文献   

3.
Volcanic activities can create cataclysmic hazards to surrounding environments and human life not only during the eruption but also by hydrologic remobilisation (lahar) processes after the cessation of eruptive activity. Although there are many studies dealing with the assessment and mitigation of volcanic hazards, these are mostly concentrated on primary eruptive processes in areas proximal to active volcanoes. However, the influence of volcaniclastic resedimentation may surpass the impacts of primary eruptive activity in terms of both extent and persistence, and can ultimately result in severe hazards in downstream areas.Examination of the volcaniclastic successions of non-marine Pliocene–Holocene sedimentary basins in Japan has revealed hydrological volcaniclastic sedimentation in fluvial and lacustrine environments hundreds of kilometres from the inferred source volcano. Impacts on these distal and often spatially separated basins included drastic changes in depositional systems caused by sudden massive influxes of remobilised pyroclastic material. Typical volcaniclastic beds comprise centimetre- to decimetre-thick primary pyroclastic fall deposits overlain by metre- to 10s of metres-thick resedimented volcaniclastic deposits, intercalated in sedimentary successions of non-volcanic provenance. The relatively low component of primary pyroclastic fall deposits in the volcaniclastic beds suggests that: 1) potential volcanic hazards would be underestimated on the basis of primary pyroclastic fall events alone; and 2) the majority of resedimented material was likely derived from erosion of non-welded pyroclastic flow deposits in catchment areas rather than remobilisation of local fallout deposits from surrounding hillslopes.The nature, distribution and sequence of facies developed by distal volcaniclastic sediments reflect the influence of: 1) proximity to ignimbrite, but not directly with the distance to the eruptive centre; 2) ignimbrite nature (non-welded or welded) and volume; 3) temporal changes in sediment flux from the source area; 4) the physiography and drainage patterns of the source area and the receiving basin, and any intervening areas; and 5) the formation of ephemeral dam-lakes and intra-caldera lakes whose potential catastrophic failure can impact distal areas. Models of the styles and timing of distal volcaniclastic resedimentation are thus more complicated than those developed for proximal settings of stratovolcanoes and their volcaniclastic aprons and hence present different challenges for hazard assessment and mitigation.  相似文献   

4.
The Hianana Volcanics consist of bedded tuff and dacitic lava that form a locally mappable unit within the extensive, Late Permian silicic volcanic sequence of northeastern New South Wales. Principal components of the bedded tuff are crystal and volcanic lithic fragments ranging from coarse ash to lapilli, accompanied by variable amounts of fine ash matrix. Well denned plane parallel thin bedding is characteristic. Sandwave bed forms, including low‐angle cross‐beds and wavy beds, are confined to an area of 2–3 km2 coinciding with the thickest sections (70 m) of bedded tuff. A high‐aspect ratio flow of porphyritic dacitic lava overlies the bedded tuff in the same area. The setting, lithofacies, extent and geometry of the bedded tuffs of the Hianana Volcanics are comparable with modern tuff rings which are composed of the deposits from base surges generated by explosive phreatomagmatic eruptions at primary volcanic vents. Many of these have also discharged lava late in their activity. Proximal parts of the Hianana tuff ring were buried by the porphyritic lava after the phreatomagmatic eruptions had ceased. In more distal sections, the bedded tuff is less than 10 m thick and dominantly comprises fine grained, plane parallel, very thin beds and laminae; these features suggest an origin by fallout from ash clouds that accompanied the phreatomagmatic eruptions. The distal ash was covered and preserved from erosion by a layer of welded ignimbrite, the source of which is unknown.  相似文献   

5.
刘永顺  冯肖兵  聂保锋  彭年  孙善平 《岩石学报》2014,30(12):3671-3680
火山碎屑岩中的碎屑颗粒形态、分布和显微结构保存着岩浆房内岩浆的结晶状态、火山爆炸过程中的岩浆气泡化和碎裂作用以及火山碎屑堆积和变形过程的大量物理信息。为揭示北京西山沿河城地区东岭台组酸性火山碎屑流形成的物理过程,本文以东岭台组第三岩性段的酸性熔结火山碎屑岩的火山地质、岩相学研究为基础,应用分形理论和方法对酸性熔结火山碎屑岩中的碎屑形态的分形特征开展了定量研究。不同类型碎屑的表面和边界盒维数的数值范围大小具有一致性。玻屑变幅较大,石英晶屑和岩屑变幅较小,这说明碎屑的塑性和流变性对碎屑形态多样性的影响较大。在几类碎屑中,熔蚀石英的边界盒维数和周长-面积法获得的分形维数最大,说明熔蚀作用对石英斑晶边界形态复杂性的影响超过了其它机制对火山碎屑形态复杂性的影响。东岭台组酸性火山碎屑岩中的熔蚀石英、石英碎屑、长石碎屑、玻屑和岩屑的分形特征有明显差异,反映了火山喷发过程中围岩和岩浆性质、物理化学条件以及火山作用机制的差异。火山碎屑形态的分形特征和幂率规律,证明火山爆炸过程是一种自组织临界条件下发生的。  相似文献   

6.
Large-scale ignimbrite eruptions from rhyolitic caldera volcanoes can trigger geologically instantaneous changes in sedimentary systems over huge areas by either burying existing environments or overloading them with vast quantities of unconsolidated particulate material. The post-eruption readjustment of the landscape to such perturbations is one of the most dramatic processes in physical sedimentology, exemplified here by the 1.8 ka Taupo eruption in the central North Island of New Zealand. This eruption generated voluminous fall deposits, then climaxed with emplacement of a c. 30 km3 non-welded ignimbrite over a near-circular area of c. 20 000 km2. Approximately 90% of the area, but < 50% of the ignimbrite volume, is represented by a landscape-mantling unit that covered the pre-eruption topography to a depth varying from c. 10 m in proximal areas to less than 15–30 cm distally. The remainder of the ignimbrite deposit is represented by landscape-modifying material that ponded in valley bottoms and depressions to thicknesses of up to 70 m, with no systematic variation in thickness with distance from source.The headwaters of many of the North Island's largest rivers were impacted by both the primary pyroclastic fall and flow material. Large-scale post-eruption remobilisation of this material, coupled with the re-establishment of fluvial systems, occurred in a distinct sequence as recorded by the evolution of sedimentary facies in different sub-environments. Following an initial period dominated by mass flows, re-establishment of fluvial systems began with the headward erosion of box canyons through the ponded ignimbrite deposits, a process often associated with the break-out of temporary lakes. Aggradational streams developed in these channels rapidly evolved from shallow, ephemeral, sediment-laden outbursts associated with flash flood events to deeper, permanent braided rivers, before declining sediment yields led to retrenchment of single thread rivers and a return to pre-eruption gradients and bedloads years to decades later. Typically the modern profile of many streams and rivers follow closely their pre-eruption profiles, and incision and erosion is overwhelmingly confined to the deposits of the eruption itself.Although the general remobilisation pattern is similar for all impacted river systems, detailed studies of the Waikato, Rangitaiki, Mohaka, Ngaruroro and Whanganui catchments show that the relative timing and scale of each eruption response phase differs between each catchment. These reflect differences in catchment physiography and hydrology, and the volume and type of pyroclastic material deposited in each. Ultimately, the landscape response reflects the relative spatial distributions of, and the volumetric ratios between, the volumes of pyroclastic debris, water, and accommodation space in the basin (cf. Kataoka and Manville, this volume).  相似文献   

7.
The Ebisutoge–Fukuda tephra (Plio‐Pleistocene boundary, central Japan) has a well‐recorded eruptive style, history, magnitude and resedimentation styles, despite the absence of a correlative volcanic edifice. This tephra was ejected by an extremely large‐magnitude and complex volcanic eruption producing more than 400 km3 total volume of volcanic materials (volcanic explosivity index=7), which extended more than 300 km away from the probable eruption centre. Remobilization of these ejecta occurred progressively after the completion of a series of eruptions, resulting in thick resedimented volcaniclastic deposits in spatially separated fluvial basins, more than 100 km from the source. Facies analysis of resedimented volcaniclastic deposits was carried out in distal fluvial basins. The distal tephra (≈100–300 km from the source) comprises two different lithofacies, primary pyroclastic‐fall deposits and reworked volcaniclastic deposits. The resedimented volcaniclastic succession shows five distinct sedimentary facies, interpreted as debris‐flow deposits (facies A), hyperconcentrated flow deposits (facies B), channel‐fill deposits (facies C), floodplain deposits with abundant flood‐flow deposits (facies D) and floodplain deposits with rare flood deposits (facies E). Resedimented volcaniclastic materials at distal locations originated from unconsolidated deposits of a climactic, large ignimbrite‐forming eruption. Factors controlling inter‐ and intrabasinal facies changes are (1) temporal change of introduced volcaniclastic materials into the basin; (2) proximal–distal relationship; and (3) distribution pattern of pyroclastic‐flow deposits relative to drainage basins. Thus, studies of the Ebisutoge–Fukuda tephra have led to a depositional model of volcaniclastic resedimentation in distal areas after extremely large‐magnitude eruptions, an aspect of volcaniclastic deposits that has often been ignored or poorly understood.  相似文献   

8.
  相似文献   

9.
塔里木溢流玄武岩的喷发特征   总被引：5，自引：3，他引：2  
上官时迈  田伟  徐义刚  关平  潘路 《岩石学报》2012,28(4):1261-1272
通过对柯坪地区二叠系野外火山岩露头剖面和英买力、哈拉哈塘井区二叠系火山岩钻井剖面的对比,将塔里木早二叠世溢流玄武岩划分为三个旋回,从老到新依次是:库普库兹满溢流玄武岩旋回(KP),长英质火山碎屑岩旋回(FP)和开派兹雷克溢流玄武岩旋回(KZ)。KP旋回以巨厚溢流玄武岩夹凝灰岩为特征,在柯坪露头区和英买力井区均可划分出三层巨厚玄武质熔岩流,至哈拉哈塘井区减少为一层玄武岩流,但长英质火山碎屑岩和熔岩厚度增加。FP旋回在柯坪露头区自下而上包括空落相凝灰岩,熔结凝灰岩,再沉积火山碎屑岩和正常碎屑岩夹火山灰层,该层可与英买力及哈拉哈塘井区的凝灰岩层对比,表明在塔北存在一期面积广泛的长英质火山喷发。KZ旋回以溢流玄武岩为主,在开派兹雷克剖面识别出四期喷发共8层溢流玄武岩和一期安山质玄武岩,每期喷发之间夹少量碎屑岩,但未见长英质火山碎屑岩夹层,该特征与英买力和哈拉哈塘井区的火山层序组合不同,而与塔中溢流玄武岩类似。三个火山旋回的划分表明塔里木大火成岩省经历了"基性溢流玄武岩-酸性火山碎屑岩-基性溢流玄武岩"的演变过程,与Afro-Arabian溢流玄武岩省相似,可进行对比研究。  相似文献   

10.
De Lange  W. P.  Prasetya  G. S.  Healy  T. R. 《Natural Hazards》2001,24(3):251-266
Pyroclastic flows entering the sea played a major role in generating the largest tsunamiwaves, arising from the 1883 eruption of Krakatau, Indonesia, which caused a considerabledeath toll, most deaths resulting from the tsunamis. The potential exists for similar eventsto occur in Indonesia and New Zealand.Processes leading to tsunami generation by pyroclastic flows, especially those associatedwith Krakatau-type eruptions, are reviewed. The major processes include:1. Deposition at the shoreline causing a lateral displacement as the zone of depositionmoves offshore.2. Upward and lateral displacement of water caused by the propagation of a watersupported mass-flow.3. Downward and lateral displacement of water caused by the sinking of debris from a segregated flow travelling over the water surface.4. Upward displacement of a large volume of water due to the deposition of acaldera-infill ignimbrite or pyroclastic flow deposit.The pyroclastic flow is modelled as a horizontal piston forcingwater displacement. The flow behaves as a wedge of material displacingseawater horizontally and vertically as it moves outwards from the source.Individual pyroclastic flows are treated as linear features that travel alonga specific direction from the volcano, exhibiting limited lateral spreading.The event duration for the formation of a large pyroclastic flow and thedeposition of the ignimbrite is taken as 200–400 s, with flow velocitiesdependent on the volume of material erupted.For simulations it is assumed that the ignimbrite deposit is elliptical with relativelyuniform thickness and the principal axis orientated along the flow direction. Therefore the tsunami is generated by defining an elliptical source region and defining an effective displacement behaviour at each node within that region. The effective displacement is defined by a start time, a finish time and a vertical velocity. These three parameters determine when the seafloor starts to rise and how far it travels during a model time step. The result is a seafloor disturbance that propagates away from the source.The major difficulty with this approach is determination of the appropriate verticalvelocity. With a real pyroclastic flow the effective vertical velocity at any point isvery high. However the model needs to average the displacement spatially andtemporally. Accordingly we apply the model to pyroclastic flows from Mayor Island, New Zealand to examine the influence of model parameters. To further calibrate the numerical model this study is being undertaken in conjunction with physical modelling of the Krakatau 1883 eruption at the Indonesian Tsunami Research Center, BPPT, Jakarta. Historical data will also be used to refine and calibrate the pyroclastic flow model.  相似文献   

11.
Gabal Abu Had is an exposure of a volcanosedimentary succession in the North Eastern Desert Basement Complex. This succession includes intercalation of two major rock units, which are Dokhan Volcanics and Hammamat Group with different styles of formation, deposition environments, and genesis. Gabal Abu Had succession (GHS) is a northward dipping, c. 700-m-thick volcanosedimentary succession that rests on metavolcanic and old granitoid rocks with erosion unconformity. The lower part of GHS is dominated by volcaniclastic mass flow deposits and andesitic lava with interbedded gravely sandstone, whereas the upper sequence is composed of pyroclastic flow deposits including welded to no welded ignimbrite intercalated with gravely sandstone and massive clast-support conglomerate toward the top. Facies analysis study of GHS presented eight lithofacies types, which grouped into five lithofacies associations. The GHS basin started with effusive eruption of silica-poor volcanic center, which produced andesitic lava. A part of lava underwent hyaloclastic fragmentation due to the presence of fluvial water in places producing the volcaniclastic mass flow deposits. Later, an explosive silica-rich volcanic center affected the GHS basin and created the pyroclastic plain deposits (ignimbrite and bedded tuff). The fluvial braided river is still in action since the first eruption, producing gravely sandstone, which is intercalated with the volcanic sequence. The upper GHS is characterized by thick, massive, and clast-supported conglomerate (well rounded clasts up to 100 cm) of alluvial fan facies. Several silica-rich and silica-poor subvolcanic intrusions were emplaced in the GHS. The GHS development displays a cycle from low- to high-energy sedimentation under humid climatic conditions, in addition to extension and down faulting of basin shoulders. In comparison with Gabal El Urf, located to the north of GHS and was studied by El-Gameel (2010), the GHS is a lava-rich succession rather than Gabal El Urf succession which is mainly pyroclastic rich.  相似文献   

12.
Ignimbrite flow units commonly show reverse grading of large pumice clasts and normal grading of large lithic clasts. Ignimbrites show coarse-tail grading, in which particles beneath a critical diameter, ranging from 64 to 2 mm, are ungraded. Above this size the larger the clast diameter the more pronounced the segregation. The grading is consistent with the theoretical settling rates of particles in a dispersion with a high particle concentration. Ignimbrite flow units show a reversely graded, fine grained basal layer which is attributed to the action of boundary forces during flow. Ignimbrites are commonly associated with cross-stratified pyroclastic surge deposits and fine ash fall deposits formed in the same eruption. The fine ash fall deposit is depleted in crystals and is thought to be the deposit of the fine turbulent cloud observed making up the upper parts of nuées ardentes. Pyroclastic flows are postulated to be dense, poorly expanded partly fluidized debris flows. Only its fine grained components can be fluidized by gas. Pyroclastic flows are believed to behave as a dispersion of larger clasts in a medium of fluidized fines, which acts as a lubricant similar to water in mud-flows. Poor sorting in ignimbrites is attributed to high particle concentrations not turbulence. Many pyroclastic flows may be laminar in their movement with apparent viscosities, deduced from the lateral grading of large lithic clasts, in the range 101?103 poise.  相似文献   

13.
《Gondwana Research》2001,4(3):519-527
A controversy regarding the distinction between the highly welded lava-like ignimbrites sometimes showing strongly rheomorphic characters, and the extensive silicic lava flow has been overwhelming in the recent literature. However, a rethinking, after Walker (1983), has brought into light the concept of ‘grade’ referring to the degree and extent of welding between the pyroclasts. Various parameters and characteristics were suggested for strengthening the idea of densely welded ignimbrites, which differentiate them from lava. Here, a comprehensive study on early Proterozoic acid magmatic rocks forming lower part of the Dongargarh Supergroup, central India, has been made to suggest extensive occurrence of high-grade welded rheomorphic tuffs. The possibility of their being welded ignimbrite rather than lava flow has been explored in the light of facies analysis as well as detailed microscopic evidences. Despite having overall monolithologic look various units bear distinction on account of their nature of welding, enrichment of phenocrysts and degree of stretching. The presence of vitroclastic texture, melt inclusions and radial fracturing of phenocrysts suggests pyroclastic nature of these deposits. Based on these characters four facies — A, B, C and D from bottom to the top respectively, have been identified from field studies around Salekasa. Facies-A and B represent clast-supported/matrix-supported welded pyroclastic flow deposits. Facies-C represents extremely welded thinly laminated rheomorphic tuffs while lava-like tuffs with an autobreccia carapace is represented by facies D. A complete gradation of facies A/B to D through C exists. High to extremely high-grade nature of welding in these deposits suggests a low column-height subaerial plinian to fissure eruption of a very high temperature silicic magma in a continental setting.  相似文献   

14.
The Y-5 ash is the most widespread layer in deep-sea sediments from the eastern Mediterranean. This ash layer was previously correlated with the Citara-Serrara tuff on Ischia Island and dated at approximately 25,000 yr B.P. New data on the glass chemistry of the Y-5 ash and pyroclastic deposits from the Neopolitan volcanic province suggest that the layer is correlative with the large-volume Campanian ignimbrite and not with the deposit from Ischia Island. The volume of the Y-5 ash is approximately 65 km3 which is comparable in magnitude to the volume of the Campanian ignimbrite. An interpolated age of approximately 38,000 yr B.P. is estimated based on sedimentation rates derived from δ18O stratigraphy. There is a discrepancy between this estimate and previously reported radiocarbon ages which range from 24,000 to 35,000 yr B.P. We propose that the “Campanian tuff ash layer” should be adopted as the full stratigraphic name for the Y-5 ash. The deep-sea ash layer is divisible into two units in proximal localities, probably correlating with two major phases of the eruption: plinian and ignimbrite.  相似文献   

15.
In this paper,we describe three strata at the distal part of the pyroclastic-flow from the Tianchi volcano in 1215(±15) eruption.One of the strata with crosslayers that are different from typical pyroclastic-flow strata may come from a ground-surge.The grain-size and scanning electron microscopy(SEM) analysis was performed to study the origin of the pyroclastic-flow.Characteristics of grain-size distribution show that it is similar with the ash cloud.Through the SEM analyses,we found some quench structures with less damage on the surfaces of the vitric pumices.These phenomena indicate that there has been hydration in the transportation processes at the distal of pyroclastic-flow.It has partly changed the transportation mechanism of pyroclastic-flow,which transitions form dense flow to diluted flow.This paper develops a new distal pyroclastic-flow model in the Tianchi volcano that can be divided into three stages,i.e.the quench stage,expanding stage and depositing stage.  相似文献   

16.
长白山天池地区全新世以来火山活动及其特征   总被引：10，自引：0，他引：10  
长白山火山全新世规模最大的喷发活动发生在公元1199-1200年,即800年前的大爆发,被确定为普林尼或布里尼(Plinian)式喷发。这次大爆发形成体积巨大的、分布广泛的以空中降落堆积物为主的火山喷发碎屑堆积物,在长白山火山周围,远至日本都留下了地质记录。文章辨认并划分了这次大爆发火山碎屑物的成因类型:火山喷发空中降落堆积物(airfalltephra)、火山碎屑流(pyroclasticflow)状堆积物和火山泥流(lahar)堆积物,并且点、面结合,近、远和国内、国外兼顾,分析了这些火山碎屑物的主要特征、分布和相互关系,进而确定这些火山碎屑物分别属于两次普林尼式爆发。第1次(早期)普林尼式爆发称赤峰期,火山喷发模式为:普林尼式喷发柱(赤峰空落浮岩层)-火山碎屑流(长白山火山碎屑流层),随即主要由火山碎屑流诱发火山泥流(二道白河火山泥流层);第2次(晚期)普林尼式爆发称园池期,喷发模式为:普林尼式喷发柱(园池空落浮岩火山灰层)-火山碎屑流(冰场火山碎屑流层)。在层序上将气象站期碱流岩置于800年前大爆发火山碎屑物之下是正确的,其时代为晚更新世-全新世早期。  相似文献   

17.
During emplacement, lavas modify the pre‐existing topography and release a large amount of heat. In spite of the relevance of both heat and mass release, combined morphological and thermal analyses have been seldom carried out at a flow‐field scale. Here, we consider a channelised lava flow unit formed at Mt Etna during the 2001 flank eruption, and we show that, by combining a morphological analysis of the pre‐ and post‐emplacement topography with the analysis of the syn‐eruptive thermal signature, critical insights about the processes driving mass and heat dissipation can be derived. Our results suggest that, in the considered lava flow, the pre‐emplacement slope controls heat dissipation and can influence the thickness of the final lava deposit, with possible implications for hazard assessment. The width of the lava channel, instead, appears less sensitive to the pre‐emplacement slope, and tends to regularly increase with increasing distance from the vent.  相似文献   

18.
The Las Colinas landslide, which was triggered by the 13 January 2001, Mw?=?7.7 El Salvador earthquake, was highly destructive. The local site is composed of pyroclastic flows, brown cinders, soft pyroclastic fall deposits and a thin palaeosol and is characterised by steep slopes. The extremely high ground motions recorded near the landslide location are assumed to be both produced by site effects and responsible for the landslide. To characterise the ground motion amplifications due to site effects in terms of the variation in geometrical and geological settings, parametric studies were conducted with a linear elastic slope model, which was vertically subjected to the scattering SV wave of the Gabor wavelet. The results show that a maximum amplification is obtained when the model slope angle is approximately 30° (similar to the actual slope angle), and the maximum amplification is located approximately 20 m behind the crest, where the actual movement was initiated. Additionally, a slope with a height of approximately 160 m enhances ground motion amplification. The subsurface geology is found to induce a greater effect on amplification than that of the slope topography. In particular, a soft pyroclastic fall deposit is observed to contribute most of the ground motion amplification. According to the numerical results, it can be concluded that the local site conditions induced extremely high ground motions that then contributed to the slope movement. Although the thin, buried layer of palaeosol did not cause any significant amplification, its weak cohesion enhanced movement.  相似文献   

19.
Analysis of a population of dilational faults within a densely welded ignimbrite layer reveals fault zone geometries that vary greatly within a single fault and between faults, but does not correlate with displacement. Within an individual fault the thickness of the fault core can differ by up to an order of magnitude along dip. Similarly, joint density adjacent to faults varies along fault dip but does not increase with displacement. A correlation does exist however, between joint density and the degree of ignimbrite welding, which can vary vertically within an ignimbrite layer. Previous work has shown that welding increases ignimbrite strength: non-welded ignimbrites form deformation bands and densely welded ignimbrites form discrete fractures. We observe zones of densely welded ignimbrite with high joint density, while less-welded zones have lower joint density. In turn, high joint densities correlate with narrow fault cores and low joint densities with wide fault cores. We propose a joint based model for dilational fault initiation and growth. Faults initiate on precursory joints and grow by entraining joint bound slabs, hence the correlation between high and low joint density (thin and thick slabs) and narrow and wide fault cores respectively. Ultimately joint density and consequently fault zone architecture are controlled by subtle variations in mechanical strength within the ignimbrite layer.  相似文献   

20.
 The Kos Plateau Tuff (KPT) erupted during a moderate-volume explosive rhyolitic event approximately 161 ka from a source south of Kos in the eastern Aegean sea. Six major stratigraphic units have been identified, from A at the base, to F, uppermost. Unit A is a widespread vitric ash fall layer that is thickest (1.5 m), and most extensive, southeast of the source. Unit B is a 1- to 2-m-thick, low-angle cross-stratified armoured pumice lapilli and ash layer found on Kos. Unit C resembles unit B but includes a greater abundance of lithic lapilli, less fine ash, is only diffusely stratified and is on Kos and west of the source. Unit D includes a sequence of three non-welded, 1- to 20-m-thick ignimbrites that extend radially >38 km from the source in areas of low topography. Unit E is a sequence of two non-welded, 3- to 8-m-thick ignimbrites which occur radially from the vent regardless of topography, >64 km from source. Unit F has a 6-m-thick, basal, low-angle cross-stratified armoured pumice lapilli and ash part probably deposited radially from source. The upper part of unit F is a widespread >1-m-thick vitric ash fall layer, found to at least 50 km from the source. These six units represent a change in eruptive conditions from initial and final phreatomagmatic activity depositing fallout and internally stratified pyroclastic density current deposits to "dry" explosive during the more intense phases of the eruption which generated ignimbrites. Received: 8 June 1998 / Accepted: 14 January 1999  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号