首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 78 毫秒
1.
METAMORPHISM IN THE LESSER HIMALAYAN CRYSTALLINES AND MAIN CENTRAL THRUST ZONE IN THE ARUN VALLEY AND AMA DRIME RANGE (EASTERN HIMALAYA)1　BrunelM ,KienastJR . tudep啨ｔｒｏ structuraledeschevauchementsductileshimalayenssurlatrans versaledel’Everest Makalu (N啨ｐａｌｏｒｉｅｎｔａｌ) [J].CanadianJ .EarthSciences,1986 ,2 3:1117～ 1137. 2　LombardoB ,RolfoF .TwocontrastingeclogitetypesintheHimalayas :implicationsfortheHimalayanorogeny…  相似文献   

2.
POLYPHASE METAMORPHISM AND INVERTED THERMAL GRADIENT IN THE LESSER HIMALAYA OF CENTRAL NEPAL: CONSTRAINTS FROM WHITE MICA COMPOSITIONS  相似文献   

3.
Following the early Eocene collision of the Indian and Asian plates, intracontinental subduction occurred along the Main Central Thrust (MCT) zone in the High Himalaya. In the Kishtwar–Zanskar Himalaya, the MCT is a 2 km thick shear zone of high strain, distributed ductile deformation which emplaces the amphibolite facies High Himalayan Crystalline (HHC) unit south‐westwards over the lower greenschist facies Lesser Himalaya. An inverted metamorphic field gradient, mapped from the first appearance of garnet, staurolite and kyanite index minerals, is coincident with the high strain zone. Petrography and garnet zoning profiles indicate that rocks in the lower MCT zone preserve a prograde assemblage, whereas rocks in the HHC unit show retrograde equilibration. Thermobarometric results derived using THERMOCALC indicate a P–T increase of c. 180 °C and c. 400 MPa across the base of the MCT zone, which is a consequence of the syn‐ to postmetamorphic juxtaposition of M1 kyanite grade rocks of the HHC unit on a cooling path over biotite grade footwall rocks, which subsequently attain their peak (M2) during thrusting. Inclusion thermobarometry from the lower MCT zone reveals that M2 was accompanied by loading, and peak conditions of 537±38 °C and 860±120 MPa were attained. M1 kyanite assemblages in the HHC unit, which have not been overprinted by M2 fibrolitic sillimanite, were not significantly affected by M2, and conditions of equilibration are estimated as 742±53 °C and 960±180 MPa. There is no evidence for dissipative or downward conductive heating in the MCT zone. Instead, the primary control on the distribution of peak assemblages, represented by the index minerals, is postmetamorphic ductile thrusting in a downward propagating shear zone. Polymetamorphism and diachroneity of equilibration are also important controls on the thermal profile through the MCT zone and HHC unit.  相似文献   

4.
The Lesser Himalaya in central Nepal consists of Precambrian to early Paleozoic, low- to medium-grade metamorphic rocks of the Nawakot Complex, unconformably overlain by the Upper Carboniferous to Lower Miocene Tansen Group. It is divided tectonically into a Parautochthon, two thrust sheets (Thrust sheets I and II), and a wide shear zone (Main Central Thrust zone) from south to north by the Bari Gad–Kali Gandaki Fault, the Phalebas Thrust and the Lower Main Central Thrust, respectively. The Lesser Himalaya is overthrust by the Higher Himalaya along the Upper Main Central Thrust (UMCT). The Lesser Himalaya forms a foreland-propagating duplex structure, each tectonic unit being a horse bounded by imbricate faults. The UMCT and the Main Boundary Thrust are the roof and floor thrusts, respectively. The duplex is cut-off by an out-of-sequence fault. At least five phases of deformation (D1–D5) are recognized in the Lesser Himalaya, two of which (D1 and D2) belong to the pre-Himalayan (pre-Tertiary) orogeny. Petrographic, microprobe and illite crystallinity data show polymetamorphic evolution of the Lesser and Higher Himalayas in central Nepal. The Lesser Himalaya suffered a pre-Himalayan (probably early Paleozoic) anchizonal prograde metamorphism (M0) and a Neohimalayan (syn- to post-UMCT) diagenetic to garnet grade prograde inverted metamorphism (M2). The Higher Himalaya suffered an Eohimalayan (pre or early-UMCT) kyanite-grade prograde metamorphism (M1) which was, in turn, overprinted by Neohimalayan (syn-UMCT) retrograde metamorphism (M2). The isograd inversion from garnet zone in the Lesser Himalaya to kyanite zone in the Higher Himalaya is only apparent due to post-metamorphic thrusting along the UMCT. Both the Lesser and Higher Himalayas have undergone late-stage retrogression (M3) during exhumation.  相似文献   

5.
The Main Central Thrust (MCT) is a tectono-metamorphic boundary between the Higher Himalayan crystallines (HHC) and Lesser Himalayan metasediments (LHS), reactivated in the Tertiary, but which had already formed as a collisional boundary in the Early Paleozoic. To investigate the nature of the MCT, we analyzed whole-rock Nd isotopic ratios of rocks from the MCT and surrounding zones in the Taplejung–Ilam area of far-eastern Nepal, Annapurna–Galyang area of central Nepal, and Maikot–Barekot area of western Nepal. We define the MCT zone as a ductile–brittle shear zone between the upper MCT (UMCT) and lower MCT (LMCT). The protoliths of the MCT zone may provide critical constraints on the tectonic evolution of the Himalaya. The LHS is lithostratigraphically divided into the upper and lower units. In the Taplejung–Ilam area, different lithologic units and their εNd (0) values are as follows; HHC (− 10.0 to − 18.1), MCT zone (− 18.5 to − 26.2), upper LHS unit (− 17.2), and lower LHS unit (− 22.0 to − 26.9). There is a distinct gap in the εNd (0) values across the UMCT except for the southern frontal edge of the Ilam nappe. In the Annapurna–Galyang and Maikot–Barekot areas, different lithologic units and their εNd (0) values are as follows; HHC (− 13.9 to − 17.7), MCT zone (− 23.8 to − 26.2 except for an outlier of − 12.4), upper LHS unit (− 15.6 to − 26.8), and lower LHS unit (− 24.9 to − 26.8). These isotopic data clearly distinguish the lower LHS unit from the HHC. Combining these data with the previously published data, the lowest εNd (0) value in the HHC is − 19.9. We regard rocks with εNd (0) values below − 20.0 as the LHS. In contrast, rocks with those above − 19.9 are not always the HHC, and some parts of them may belong to the LHS due to the overlapping Nd isotopic ratio between the HHC and LHS. Most rocks of the MCT zone have Nd isotopic ratios similar to those of the LHS, but very different from those of the HHC. The spatial patterns in the distribution of εNd (0) value around the UMCT suggest no substantial structural mixing of the HHC and LHS during the UMCT activities in the Tertiary. A discontinuity in the spatial distribution of εNd (0) values is laterally continuous along the UMCT throughout the Himalayas. These facts support the theory that the UMCT was originally a material boundary between the HHC and LHS, suggesting the MCT zone was mainly developed with undertaking a role of sliding planes during overthrusting of the HHC in the Tertiary.  相似文献   

6.
The metamorphism in the Central Himalaya   总被引：10，自引：0，他引：10  
ABSTRACT All along the Himalayan chain an axis of crystalline rocks has been preserved, made of the Higher Himalaya crystalline and the crystalline nappes of the Lesser Himalaya. The salient points of the metamorphism, as deduced from data collected in central Himalaya (central Nepal and Kumaun), are:
  • 1 The Higher Himalaya crystalline, also called the Tibetan Slab, displays a polymetamorphic history with a first stage of Barrovian type overprinted by a lower pressure and/or higher temperature type metamorphism. The metamorphism is due to quick and quasi-adiabatic uplift of the Tibetan Slab by transport along an MCT ramp, accompanied by thermal refraction effects in the contact zone between the gneisses and their sedimentary cover. The resulting metamorphic pattern is an apparent (diachronic) inverse zonation, with the sillimanite zone above the kyanite zone.
  • 2 Conversely, the famous inverted zonation of the Lesser Himalaya is basically a primary pattern, acquired during a one-stage prograde metamorphism. Its origin must be related to the thrusting along the MCT, with heat supplied from the overlying hot Tibetan Slab, as shown by synmetamorphic microstructures and the close geometrical relationships between the metamorphic isograds and the thrust.
  • 3 Thermal equilibrium is reached between units above and below the MCT. Far behind the thrust tip there is good agreement between the maximum temperature attained in the hanging wall and the temperature of the Tibetan Slab during the second metamorphic stage; but closer to the MCT front, the thermal accordance between both sides of the thrust is due to a retrogressive metamorphic episode in the basal part of the Tibetan Slab.
  相似文献   

7.
MAIN CENTRAL THRUST ZONE IN THE KATHMANDU AREA, CENTRAL NEPAL, AND ITS TECTONIC SIGNIFICANCE1　AritaK ,LallmeyerRD ,TakasuA .TectonothermalevolutionoftheLesserHimalaya ,Nepal:constraintsfrom 4 0 Ar/3 9AragesfromtheKathmandunappe[J].TheIslandArc ,1997,6 :372～ 384. 2　RaiSM ,GuillotS ,LeFortP ,etal.Pressure temperatureevolutionintheKathmanduandGosainkundregions ,CentralNepal[J].JourAsianEarthSci ,1998,16 :2 83～ 2 98. 3　SchellingD ,KArita .…  相似文献   

8.
DIFFERENT VARIETIES OF MIOCENE LEUCOGRANITE IN THE ARUN VALLEY—EVEREST—MAKALU AREA:FIELD RELATIONS, PETROLOGY AND ISOTOPE GEOCHEMISTRY1　AritaK .OriginoftheinvertedmetamorphismoftheLowerHimalayas,CentralNepal[J] .Tectonophysics,1983,93:4 3～6 0 . 　BarbarinB .Areviewoftherelationshipsbetweengranitoidtypes,theiroriginsandtheirgeodynamicenvironments[J] .Lithos,1999,4 6 :6 0 5～ 6 2 6 . 3　BurchfielBC ,ChenZ,HodgesKV ,etal.TheSou…  相似文献   

9.
The series of four different, steeply inclined thrusts which sharply sever the youthful autochthonous Cenozoic sedimentary zone, including the Siwalik, from the mature old Lesser Himalayan subprovince is collectively known as the Main Boundary Thrust (MBT). In the proximity of this trust in northwestern and eastern sectors, the parautochtonous Lesser Himalayan sedimentary formations are pushed up and their narrow frontal parts split into imbricate sheets with attendant repetition and inversion of lithostratigraphic units. The superficially steeper thrust plane seems to flatten out at depth. The MBT is tectonically and seismically very active at the present time.The Main Central Thrust (MCT), inclined 30° to 45° northwards, constitutes the real boundary between the Lesser and Great Himalaya. Marking an abrubt change in the style and orientation of structures and in the grade of metamorphism from lower amphibolitefacies of the Lesser Himalayan to higher metamorphic facies of the Great Himalayan, the redefined Main Central Thrust lies at a higher level as that originally recognized by A. Heim and A. Gansser. They had recognized this thrust as the contact of the mesozonal metamorphics against the underlying sedimentaries or epimetamorphics. It has now been redesignated as the Munsiari Thrust in Kumaun. It extends northwest in Himachal as the Jutogh Thrust and farther in Kashmir as the Panjal Thrust. In the eastern Himalaya the equivalents of the Munsiari Thrust are known as the Paro Thrust and the Bomdila Thrust. The upper thrust surface in Nepal is recognized as the Main Central Thrust by French and Japanese workers. The easterly extension of the MCT is known as the Khumbu Thrust in eastern Nepal, the Darjeeling Thrust in the Darjeeling-Sikkim region, the Thimpu Thrust in Bhutan and the Sela Thrust in western Arunachal. Significantly, hot springs occur in close proximity to this thrust in Kumaun, Nepal and Bhutan. There are reasons to believe that movement is taking place along the MCT, although seismically it is less active than the MBT.  相似文献   

10.
We present the results of a structural transect in Lower Dolpo, cross-cutting the upper part of the Lesser Himalaya (LH), the Higher Himalayan Crystallines (HHC) and the lower part of the Tibetan Sedimentary Sequence (TSS). The MCT zone affects the upper part of the LH as well as the lower part of the HHC and shows a later brittle reactivation. Mean vorticity in the MCT points to non-coaxial deformation. These data, together with available kinematic data along the belt, on the South Tibetan Detachment System (STDS) and in the core of the HHC, point to increasing simple shear toward the tectonic boundaries. A top-to-the-SW high-temperature shear zone (Toijem Shear Zone) is recognized in the middle part of the HHC at the boundary between Units 1 and 2. It developed during the earlier stages of exhumation of the HHC, enhancing the decompression of the hanging wall and the emplacement of leucogranite dykes and sills. Its development could be explained by a change in the velocity profile during the extrusion of the HHC, triggered by first order changes in rock types of the tectonic unit. The STDS is marked by a wide zone of high strain and by a metamorphic jump from amphibolite facies in the carbonate rocks of the upper part of the HHC to greenschist facies marbles in the lower part of the TSS. The development of a pervasive foliation towards the bottom of the TSS indicates increasing strain, related to top down-to-the-NE tectonic transport. A Low P metamorphic event, marked by the growth of post-D1 biotite porphyroblasts at the base of the TSS, is related to the conductive heating from the underlying HHC.  相似文献   

11.
Nepal can be divided into the following five east–west trending major tectonic zones. (i) The Terai Tectonic Zone which consists of over one km of Recent alluvium concealing the Churia Group (Siwalik equivalents) and underlying rocks of northern Peninsular India. Recently active southward-propagating thrusts and folds beneath the Terai have affected both the underlying Churia and the younger sediments. (ii) The Churia Zone, which consists of Neogene to Quaternary foreland basin deposits and forms the Himalayan mountain front. The Churia Zone represents the most tectonically active part of the Himalaya. Recent sedimentologic, geochronologic and paleomagnetic studies have yielded a much better understanding of the provenance, paleoenvironment of deposition and the ages of these sediments. The Churia Group was deposited between ∼14 Ma and ∼1 Ma. Sedimentary rocks of the Churia Group form an archive of the final drama of Himalayan uplift. Involvement of the underlying northern Peninsular Indian rocks in the active tectonics of the Churia Zone has also been recognised. Unmetamorphosed Phanerozoic rocks of Peninsular India underlying the Churia Zone that are involved in the Himalayan orogeny may represent a transitional environment between the Peninsula and the Tethyan margin of the continent. (iii) The Lesser Himalayan Zone, in which mainly Precambrian rocks are involved, consists of sedimentary rocks that were deposited on the Indian continental margin and represent the southernmost facies of the Tethyan sea. Panafrican diastrophism interrupted the sedimentation in the Lesser Himalayan Zone during terminal Precambrian time causing a widespread unconformity. That unconformity separates over 12 km of unfossiliferous sedimentary rocks in the Lesser Himalaya from overlying fossiliferous rocks which are >3 km thick and range in age from Permo-Carboniferous to Lower to Middle Eocene. The deposition of the Upper Oligocene–Lower Miocene fluvial Dumri Formation records the emergence of the Himalayan mountains from under the sea. The Dumri represents the earliest foreland basin deposit of the Himalayan orogen in Nepal. Lesser Himalayan rocks are less metamorphosed than the rocks of the overlying Bhimphedis nappes and the crystalline rocks of the Higher Himalayan Zone. A broad anticline in the north and a corresponding syncline in the south along the Mahabharat range, as well as a number of thrusts and faults are the major structures of the Lesser Himalayan Zone which is thrust over the Churia Group along the Main Boundary Thrust (MBT). (iv) The crystalline high-grade metamorphic rocks of the Higher Himalayan Zone form the backbone of the Himalaya and give rise to its formidable high ranges. The Main Central Thrust (MCT) marks the base of this zone. Understanding the origin, timing of movement and associated metamorphism along the MCT holds the key to many questions about the evolution of the Himalaya. For example: the question of whether there is only one or whether there are two MCTs has been a subject of prolonged discussion without any conclusion having been reached. The well-known inverted metamorphism of the Himalaya and the late orogenic magmatism are generally attributed to movement along the MCT that brought a hot slab of High Himalayan Zone rocks over the cold Lesser Himalayan sequence. Harrison and his co-workers, as described in a paper in this volume, have lately proposed a detailed model of how this process operated. The rocks of the Higher Himalayan Zone are generally considered to be Middle Cambrian to Late Proterozoic in age. (v) The Tibetan Tethys Zone is represented by Cambrian to Cretaceous-Eocene fossiliferous sedimentary rocks overlying the crystalline rocks of the Higher Himalaya along the Southern Tibetan Detachment Fault System (STDFS) which is a north dipping normal fault system. The fault has dragged down to the north a huge pile of the Tethyan sedimentary rocks forming some of the largest folds on the Earth. Those sediments are generally considered to have been deposited in a more distal part of the Tethys than were the Lesser Himalayan sediments.The present tectonic architecture of the Himalaya is dominated by three master thrusts: the Main Central Thrust (MCT), the Main Boundary Thrust (MBT) and the Main Frontal Thrust (MFT). The age of initiation of these thrusts becomes younger from north to south, with the MCT as the oldest and the MFT as the youngest. All these thrusts are considered to come together at depth in a flat-lying decollement called the Main Himalayan Thrust (MHT). The Mahabharat Thrust (MT), an intermediate thrust between the MCT and the MBT is interpreted as having brought the Bhimphedi Group out over the Lesser Himalayan rocks giving rise to Lesser Himalayan nappes containing crystalline rocks. The position of roots of these nappes is still debated. The Southern Tibetan Detachment Fault System (STDFS) has played an important role in unroofing the higher Himalayan crystalline rocks.  相似文献   

12.
The microstructural variation with a progressive change in the strain pattern are described in the rocks occurring across the footwall of the Main Central Thrust (MCT) in an area of the Garhwal Himalaya. In the western Garhwal Himalaya, the MCT has brought upper amphibolite facies metamorphic rocks southward over the greenschist facies rocks of the Lesser Himalaya. The progressively increasing flattening strain towards the MCT changes either to plane strain or in some cases to constrictional strain. This change in strain is well recorded in the microstructures. The zone dominated by flattening strain is expressed as bedding parallel mylonites. The grain reduction in this zone has occurred by dynamic recrystallization and quartz porphyroclasts were flattened parallel to the mylonite zone. The maximum finite strain ratio observed in this zone is 2.2:1.8:1. The zone, where the flattening strain changes either to plane strain or constrictional strain, record an increase in finite strain ratio up to 3.8:1.9:1. This zone represents deformation fabrics like S–C microstructures simultaneously developed during mylonitization in an intense ductile shear zone. The above zone is either near the MCT or adjacent to crystalline klippen occupying the core of the synforms in the footwall of the MCT. The microstructural evolution and the finite strain suggest that the MCT has evolved as the result of superposition of southward directed simple shear over the flattening strain. The simple shear has played an active role in the rapid translation which followed the mylonitization at deeper levels.  相似文献   

13.
GEOLOGY OF THE NORTHERN ARUN TECTONIC WINDOW1　BordetP .Recherchesg啨ｏｌｏｇｉｑｕｅｓｄａｎｓｌ’ＨｉｍａｌａｙａｄｕＮ啨ｐａｌ,r啨ｇｉｏｎｄｕＭａｋａｌｕ[R].EditionsduCNRS ,Paris ,196 12 75 . 2　BordetP .G啨ｏｌｏｇｉｅｄｅｌａｄａｌｌｅｄｕＴｉｂｅｔ (Himalayacentral) [J].M啨ｍｏｉｒｅｓｈｏｒｓｓ啨ｒｉｅｄｅｌａＳｏｃｉｅｔ啨ｇ啨ｏｌｏｇｉｑｕｅｄｅＦｒａｎｃｅ,1977,8:2 35～ 2 5 0 . 3　BurcfielBC ,ChenZ ,HodgesKV ,etal.TheSouthTibetanDetachmentSystem ,Hima…  相似文献   

14.
The metamorphic core of the Himalaya in the Kali Gandaki valley of central Nepal corresponds to a 5-km-thick sequence of upper amphibolite facies metasedimentary rocks. This Greater Himalayan Sequence (GHS) thrusts over the greenschist to lower amphibolite facies Lesser Himalayan Sequence (LHS) along the Lower Miocene Main Central Thrust (MCT), and it is separated from the overlying low-grade Tethyan Zone (TZ) by the Annapurna Detachment. Structural, petrographic, geothermobarometric and thermochronological data demonstrate that two major tectonometamorphic events characterize the evolution of the GHS. The first (Eohimalayan) episode included prograde, kyanite-grade metamorphism, during which the GHS was buried at depths greater than c. 35 km. A nappe structure in the lowermost TZ suggests that the Eohimalayan phase was associated with underthrusting of the GHS below the TZ. A c. 37 Ma 40Ar/39Ar hornblende date indicates a Late Eocene age for this phase. The second (Neohimalayan) event corresponded to a retrograde phase of kyanite-grade recrystallization, related to thrust emplacement of the GHS on the LHS. Prograde mineral assemblages in the MCT zone equilibrated at average T =880 K (610 °C) and P =940 MPa (=35 km), probably close to peak of metamorphic conditions. Slightly higher in the GHS, final equilibration of retrograde assemblages occurred at average T =810 K (540 °C) and P=650 MPa (=24 km), indicating re-equilibration during exhumation controlled by thrusting along the MCT and extension along the Annapurna Detachment. These results suggest an earlier equilibration in the MCT zone compared with higher levels, as a consequence of a higher cooling rate in the basal part of the GHS during its thrusting on the colder LHS. The Annapurna Detachment is considered to be a Neohimalayan, synmetamorphic structure, representing extensional reactivation of the Eohimalayan thrust along which the GHS initially underthrust the TZ. Within the upper GHS, a metamorphic discontinuity across a mylonitic shear zone testifies to significant, late- to post-metamorphic, out-of-sequence thrusting. The entire GHS cooled homogeneously below 600–700 K (330–430 °C) between 15 and 13 Ma (Middle Miocene), suggesting a rapid tectonic exhumation by movement on late extensional structures at higher structural levels.  相似文献   

15.
Sedimentary deposits of the Cretaceous to Miocene Tansen Group of Lesser Himalayan association in central Nepal record passive-margin sedimentation of the Indian Continent with direct deposition onto eroded Precambrian rocks (Sisne Formation onto Kaligandaki Supergroup rocks), succeeded by the appearance of orogenic detritus as the Indian continent collided with Asia on a N-dipping subduction zone. Rock samples from two field traverses were examined petrographically and through detrital zircon U–Pb dating, one traverse being across the Tansen Group and another across the Higher and Tethyan Himalaya (TH). The Tansen Group depositional ages are well known through fossil assemblages. We examined samples from three units of the Tansen Group (Amile, Bhainskati, and Dumri Formations). The Sedimentary petrographic data and Qt F L and Qm F Lt plots indicate their ‘Quartzose recycled’ nature and classify Tansen sedimentary rocks as ‘recycled orogenic’, suggesting Indian cratonic and Lower Lesser Himalayan (LLH) sediments as the likely source of sediments for the Amile Formation (Am), the TH and the Upper Lesser Himalaya (ULH) as the source for the Bhainskati Formation (Bk), and both the Tethyan and Higher Himalaya (HH) as the major sources for the Dumri Formation (Dm). The Cretaceous–Palaeocene pre-collisional Am is dominated by a broad detrital zircon U–Pb ~1830 Ma age peak with neither Palaeozoic nor Neoproterozoic zircons grains, but hosts a significant proportion (23%) of syndepositional Cretaceous zircons (121–105 Ma) would be contributions from the LLH volcanosedimentary arc, Gangdese batholith (including the Xigaze forearc). The other formations of the Tansen Group are more similar to Tethyan units than to Higher Himalaya Crystalline (HHC). From the analysed samples, there is a lack of distinctive evidence or HH detritus in the Tansen basin. Furthermore, the presence of ~23±1 Ma zircons from the HH unit suggests that they could not have been exposed until the earliest Miocene time.  相似文献   

16.
At least seven different groups of felsic magmatic rocks have been observed in the Lesser and Higher Himalayan units of Nepal. Six of them are pre-Himalayan. The Ulleri Lower Proterozoic augen gneiss extends along most of the length of the Lesser Himalaya of Nepal and represents a Precambrian felsic volcanism or plutono-volcanism, mainly recycling continental crustal material; this volcanism has contributed sediment to the lower group of formations of the Lesser Himalaya. The Ampipal alkaline gneiss is a small elongated body appearing as a window at the base of the Lesser Himalayan formations of central Nepal; it originated as a Precambrian nepheline syenite pluton, contaminated by lower continental crust. The “Lesser Himalayan” granitic belt is well represented in Nepal by nine large granitic plutons; these Cambro-Ordovician peraluminous, generally porphyritic, granites, only occur in the crystaline nappes; they were probably produced by large-scale melting of the continental crust at the northern tip of the Indian craton, during a general episode of thinning of Gondwana continent with heating and mantle injection of the crust. The Formation III augen gneisses of the Higher Himalaya, such as the augen gneiss of the Higher Himalayan crystalline nappes (Gosainkund) are coeval to the “Lesser Himalayan” granites, and their more metamorphic (lower amphibolite grade) equivalents. Limited outcrops of Cretaceous trachytic volcanism lie along the southern limb of the Lesser Himalaya and are coeval with spilitic volcanism in the Higher Himalayan sedimentary series. This volcanism foreshadows the general uplift of the Indian margin before the Himalayan collision. The predominance of felsic over basic magmatism in the 2.5 Ga-long evolution of the Himalayan domain constitutes an unique example of recycling of continental material with very limited addition of juvenile mantle products.  相似文献   

17.
In the Sikkim region of north‐east India, the Main Central Thrust (MCT) juxtaposes high‐grade gneisses of the Greater Himalayan Crystallines over lower‐grade slates, phyllites and schists of the Lesser Himalaya Formation. Inverted metamorphism characterizes rocks that immediately underlie the thrust, and the large‐scale South Tibet Detachment System (STDS) bounds the northern side of the Greater Himalayan Crystallines. In situ Th–Pb monazite ages indicate that the MCT shear zone in the Sikkim region was active at c. 22, 14–15 and 12–10 Ma, whereas zircon and monazite ages from a slightly deformed horizon of a High Himalayan leucogranite within the STDS suggest normal slip activity at c. 17 and 14–15 Ma. Although average monazite ages decrease towards structurally lower levels of the MCT shear zone, individual results do not follow a progressive younging pattern. Lesser Himalaya sample KBP1062A records monazite crystallization from 11.5 ± 0.2 to 12.2 ± 0.1 Ma and peak conditions of 610 ± 25 °C and 7.5 ± 0.5 kbar, whereas, in the MCT shear zone rock CHG14103, monazite crystallized from 13.8 ± 0.5 to 11.9 ± 0.3 Ma at lower grade conditions of 525 ± 25 °C and 6 ± 1 kbar. The P–T–t results indicate that the shear zone experienced a complicated slip history, and have implications for the understanding of mid‐crustal extrusion and the role of out‐of‐sequence thrusts in convergent plate tectonic settings.  相似文献   

18.
Quartz microfabrics and associated microstructures have been studied on a crustal shear zone—the Main Central Thrust (MCT) of the Himalaya. Sampling has been done along six traverses across the MCT zone in the Kumaun and Garhwal sectors of the Indian Himalaya. The MCT is a moderately north-dipping shear zone formed as a result of the southward emplacement of a part of the deeply rooted crust (that now constitutes the Central Crystalline Zone of the Higher Himalaya) over the less metamorphosed sedimentary belt of the Lesser Himalaya. On the basis of quartz c- and a-axis fabric patterns, supported by the relevant microstructures within the MCT zone, two major kinematic domains have been distinguished. A noncoaxial deformation domain is indicated by the intensely deformed rocks in the vicinity of the MCT plane. This domain includes ductilely deformed and fine-grained mylonitic rocks which contain a strong stretching lineation and are composed of low-grade mineral assemblages (muscovite, chlorite and quartz). These rocks are characterized by highly asymmetric structures/microstructures and quartz c- and a-axis fabrics that indicate a top-to-the-south sense that is compatible with south-directed thrusting for the MCT zone. An apparently coaxial deformation domain, on the other hand, is indicated by the rocks occurring in a rather narrow belt fringing, and structurally above, the noncoaxial deformation domain. The rocks are highly feldspathic and coarse-grained gneisses and do not possess any common lineation trend and the effects of simple shear deformation are weak. The quartz c-axis fabrics are symmetrical with respect to foliation and lineation. Moreover, these rocks contain conjugate and mutually interfering shear bands, feldspar/quartz porphyroclasts with long axes parallel to the macrosopic foliation and the related structures/microstructures, suggesting deformation under an approximate coaxial strain path.On moving towards the MCT, the quartz c- and a-axis fabrics become progressively stronger. The c-axis fabric gradually changes from random to orthorhombic and then to monoclinic. In addition, the coaxial strain path gradually changes to the noncoaxial strain path. All this progressive evolution of quartz fabrics suggests more activation of the basal, rhomb and a slip systems at all structural levels across the MCT.  相似文献   

19.
Causes of large-scale landslides in the Lesser Himalaya of central Nepal   总被引：1，自引：0，他引：1  
Geologically and tectonically active Himalayan Range is characterized by highly elevated mountains and deep river valleys. Because of steep mountain slopes, and dynamic geological conditions, large-scale landslides are very common in Lesser and Higher Himalayan zones of Nepal Himalaya. Slopes along the major highways of central Nepal namely Prithvi Highway, Narayangadh-Mugling Road and Tribhuvan Highway are considered in this study of large-scale landslides. Geologically, the highways in consideration pass through crushed and jointed Kathmandu Nappe affected by numerous faults and folds. The relict large-scale landslides have been contributing to debris flows and slides along the highways. Most of the slope failures are mainly bechanced in geological formations consisting phyllite, schist and gneiss. Laboratory test on the soil samples collected from the failure zones and field investigation suggested significant hydrothermal alteration in the area. The substantial hydrothermal alteration in the Lesser Himalaya during advancement of the Main Central Thrust (MCT) and thereby clay mineralization in sliding zones of large-scale landslide are the main causes of large-scale landslides in the highways of central Nepal. This research also suggests that large-scale landslides are the major cause of slope failure during monsoon in the Lesser Himalaya of Nepal. Similarly, hydrothermal alteration is also significant in failure zone of the large-scale landslides. For the sustainable road maintenance in Nepal, it is of utmost importance to study the nature of sliding zones of large-scale landslides along the highways and their role to cause debris flows and slides during monsoon period.  相似文献   

20.
Crustal architecture of the Himalayan metamorphic front in eastern Nepal   总被引：4，自引：0，他引：4  
The Himalayan Metamorphic Front consists of two basinal sequences deposited on the Indian passive margin, the Mesoproterozoic Lesser Himalayan Sequence and the Neoproterozoic–Cambrian Greater Himalayan Sequence. The current paradigm is that the unconformity between these two basinal sequences coincides with a crustal-scale thrust that has been called the Main Central Thrust, and that this acted as the fundamental structure that controlled the architecture of the Himalayan Metamorphic Front. Geological mapping of eastern Nepal and eight detailed stratigraphic, kinematic, strain and metamorphic profiles through the Himalayan Metamorphic Front define the crustal architecture. In eastern Nepal the unconformity does not coincide with a discrete structural or metamorphic discontinuity and is not a discrete high strain zone. In recognition of this, we introduce the term Himalayan Unconformity to distinguish it from high strain zones in the Himalayan Metamorphic Front. The fundamental structure that controls orogen architecture in eastern Nepal occurs at higher structural levels within the Greater Himalayan Sequence and we suggest the name; High Himal Thrust. This 100–400 m thick mylonite zone marks a sharp deformation discontinuity associated with a steep metamorphic transition, and separates the Upper-Plate from the Lower-Plate in the Himalayan Metamorphic Front. The high-T/moderate-P metamorphism at  20–24 Ma in the Upper-Plate reflects extrusion of material between the High Himal Thrust and the South Tibet Detachment System at the top of the section. The Lower-Plate is a broad schistose zone of inverted, diachronous moderate-T/high-P metamorphic rocks formed between  18 and 6 Ma. The High Himal Thrust is laterally continuous into Sikkim and Bhutan where it also occurs at higher structural levels than the Himalayan Unconformity and Main Central Thrust (as originally defined). To the west in central Nepal, the Upper-Plate/Lower-Plate boundary has been placed at lower structural levels, coinciding with the Himalayan Unconformity and has been named the Main Central Thrust, above the originally defined Main Central Thrust (or Ramgarh Thrust).  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号