首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 156 毫秒
1.
Impact melt samples from drill hole B1-59 at the 3.8 km diameter Brent crater (Ontario) have been analysed for siderophile trace elements indicative of meteoritic contamination. Samples from the basal melt zone at 823–857 m depth are enriched in Ir, Os, Pd, Ni, Co, Cr and Se over basement, with the abundance pattern suggesting a chondritic projectile for Brent. From a Ni-Cr correlation of 10 melt samples an L or LL chondrite is inferred. The contribution of an ultramafic country rock (alnoite) in the melt is too small to significantly influence its NiCr ratio. Glass-rich breccias from the allochthonous breccias filling the crater also contain a meteoritic component. Interelement ratios (e.g. NiCr) are, however, fractionated relative to the melt zone samples. This, as well as the low Au content of all Brent samples, is probably a product of alteration.Additional data on impact melts from the 65 km diameter crater Manicouagan still did not reveal a meteoritic component, as also for the Mistastin crater (28 km diameter) where Cr analyses set an upper limit of 1% of an achondritic projectile component in the melt. Irghizites (tektite like glasses) from the Zhamanshin impact structure have been found to contain high Ni and Co concentrations, and our data show that Ir is also enriched. It is however not possible to define the projectile-type. Enrichment of an Ivory Coast tektite in Ir is confirmed. There are large differences in siderophile element concentrations among tektites, with otherwise similar chemical composition.There are now four known craters formed by chondrites (Clearwater East, Lapparjärvi, Wanapitei, and Brent), with Brent being the smallest of these. For smaller craters the projectiles appear to be limited to iron or stony-iron meteorites, because of atmospheric destruction of relatively small stony meteorites. It appears, however, that all major classes of meteorites are represented among the projectiles at terrestrial impact craters.  相似文献   

2.
Morokweng is a large, 145 Ma impact structure in the Northwest Province of South Africa. The impact origin of this structure and its melt rock has been confirmed by ample evidence of shock metamorphism in clasts within the melt rock and samples from granitoid basement below the melt body. The age of this structure is indistinguishable from the biostratigraphic age of the Jurassic-Cretaceous (J-K) boundary. The size of Morokweng, for which diameters ranging from 70 to 165 kilometers have been quoted before, and which has important implications regarding its relation to the J-K boundary, remains an open question.Here we present new results of a detailed petrographic and chemical investigation of impact melt rock and country rock samples. The granophyric melt rock is mostly unaltered and contains a large number of gabbroic and felsic clasts. The occurrence of baddeleyite, formed from high-temperature dissociation of primary zircon, indicates a high-temperature origin. The impact melt rock body, which in the cores investigated here has a thickness of at least 120 m, shows no statistically significant variation or trend in chemical composition with depth or geographic location. Chemical data for impact melt rock, breccia dike/vein breccia samples, granite, quartzite, and basic to mafic clasts were used in harmonic least squares mixing calculations to determine the source rock types and their proportions involved in the formation of the impact melt rock. Granite is the dominant target rock component (50 to 63% by weight; depending on target composition input to the mixing models), with significant (35 to 50%) mafic contributions, and a (possible) minor contribution of quartzite. New platinum group element (Ru, Rh, Pd, Os, Ir, and Pt), Re, and Au data, as well as data for other siderophile elements (Cr, Co, Ni, and Ir), confirm the presence of up to ∼ 5% of a chondritic component in the melt rock. The indigenous contribution of the PGEs from the target rocks is negligible. Normalized PGE abundance patterns and interelement ratios of Morokweng impact melt rock indicate that the projectile was likely of ordinary chondritic (possibly L chondrite) composition, but the choice of the meteoritic compositional data influences this interpretation.  相似文献   

3.
We have determined the major and trace element compositions of 176 individual microtektites/spherules from the Australasian, Ivory Coast, and North American microtektite and clinopyroxene-bearing (cpx) spherule layers. Trace element contents for up to 30 trace elements were determined by instrumental neutron activation analysis (INAA), and major element compositions were determined using energy dispersive X-ray (EDX) analysis in combination with a scanning electron microscope (SEM). In addition, petrographic data were obtained for the cpx spherules using the SEM and EDX. This is the first trace element study of individual Australasian microtektites, and the data revealed the presence of a previously unrecognized group of Australasian microtektites with high contents of Ni (up to 471 ppm). In previous studies the high-Mg (HMg) Australasian microtektites were thought to be related to the HMg Australasian tektites, but our trace element data suggest that the high-Ni (HNi) Australasian microtektites, rather than the high-Mg microtektites, are related to the high-Mg Australasian tektites. We find that Cenozoic microtektites/spherules from a given layer can be distinguished from microtektites/spherules from other layers as a group, but it is not always possible to determine which layer an individual microtektite/spherule came from based only on trace element compositions. The cpx spherules and most of the microtektites have Cr, Co, and Ni contents that are higher than the average contents of these elements in the upper continental crust, suggesting the presence of a meteoritic component. The highest Cr, Co, and Ni contents are found in the cpx spherules (and low-Si cpx-related microtektites). Unetched to slightly etched cpx spherules have Ni/Cr and Ni/Co ratios that generally lie along mixing curves between the average upper continental crust and chondrites. The best fit appears to be with an LL chondrite. The moderately to heavily etched cpx spherules have values that lie off the mixing curves in a direction that suggests Ni loss, probably as a result of solution of a Ni-rich phase (olivine?). The Ni-rich Australasian microtektites also have Ni values that lie close to mixing curves between the average upper continental crust and chondrites. However, both the cpx spherules and HNi Australasian microtektites appear to have Ir (and to a lesser extent Au) contents that are much too low to have Ni/Ir ratios similar to chondritic values. We have no explanation for the low-Ir and -Au contents except to speculate that they may be the result of a complex fractionation process. The Ivory Coast and North American microtektites do not have high enough siderophile element contents to reach any firm conclusions regarding the presence of, or nature of, a meteoritic component in them. Trace element compositions are consistent with derivation of the Cenozoic microtektite/spherule layers from upper continental crust. The normal Australasian microtektites appear to have been derived from a graywacke or lithic arenite with a range in clay and quartz content. The source rock for the high-Mg Australasian microtektites is not known, but the HMg microtektites do not appear to be normal Australasian microtektites that were simply contaminated by meteorites or ultramafic rocks. The average Ivory Coast microtektite composition can be matched with a mixture of target rocks at the Bosumtwi crater. The average composition of the North American microtektites suggests an arkosic source rock, but with graywacke and quartz-rich end members. However, we could not match the composition of the North American microtektites with lithologies in impact breccias recovered from the Chesapeake Bay impact structure that is believed to be the source crater. Likewise, we could not match the composition of the cpx spherules with mixtures of basement rocks and overlying sedimentary deposits (for which compositional data are available) at the Popigai impact crater that may be the source crater for the cpx spherules. This may be because the cpx spherules were derived, in large part, from clastic surface rocks (sandstones and shales) for which no compositional data are available.  相似文献   

4.
The discovery of the Woodleigh impact structure, first identified by R. P. Iasky, bears a number of parallels with that of the Chicxulub impact structure of K?–?T boundary age, underpinning complications inherent in the study of buried impact structures by geophysical techniques and drilling. Questions raised in connection with the diameter of the Woodleigh impact structure reflect uncertainties in criteria used to define original crater sizes in eroded and buried impact structures as well as limits on the geological controls at Woodleigh. The truncation of the regional Ajana?–?Wandagee gravity ridges by the outer aureole of the Woodleigh structure, a superposed arcuate magnetic anomaly along the eastern part of the structure, seismic-reflection data indicating a central >?37 km-diameter dome, correlation of fault patterns between Woodleigh and less-deeply eroded impact structures (Ries crater, Chesapeake Bay), and morphometric estimates all indicate a final diameter of 120 km. At Woodleigh, pre-hydrothermal shock-induced melting and diaplectic transformations are heavily masked by pervasive alteration of the shocked gneisses to montmorillonite-dominated clays, accounting for the high MgO and low K2O of cryptocrystalline components. The possible contamination of sub-crater levels of the Woodleigh impact structure by meteoritic components, suggested by high Ni, Co, Cr, Ni/Co and Ni/Cr ratios, requires further siderophile element analyses of vein materials. Although stratigraphic age constraints on the impact event are broad (post-Middle Devonian to pre-Early Jurassic) high-temperature (200?–?250°C) pervasive hydrothermal activity dated by K?–?Ar isotopes of illite?–?smectite indicates an age of 359?±?4 Ma. To date neither Late Devonian crater fill, nor impact ejecta fallout units have been identified, although metallic meteoritic ablation spherules of a similar age have been found in the Canning Basin.  相似文献   

5.
The largest known terrestrial impact melt sheet occurs within the 1850 Ma Sudbury Structure, Ontario. In order to evaluate the relative contributions of different target lithologies to the melt sheet, we have investigated the Pb isotope compositions of feldspar separates from early-formed quartz diorite magmas within Offset Dykes from around the impact structure. The samples define a linear array on plots of age-corrected 206Pb/204Pb versus 207Pb/204Pb. Samples from Offset Dykes hosted by the Huronian Supergroup (South Range) have a range of 206Pb/204Pb1850 from 15.424 to 17.255 and 207Pb/204Pb1850 from 15.390 to 15.801, whilst those hosted by Archean gneisses of the Superior Province (North Range) cluster around 206Pb/204Pb1850 ≈ 14.8 and 206Pb/204Pb1850 ≈ 15.1. These values can be approximated by binary mixing between the two major groups of target lithologies. A mix of 60-70% of Superior Province gneisses with 30-40% of Huronian metasedimentary material closely matches the Pb isotope compositions of North Range Offset Dyke samples, whereas in the South Range the required Huronian component is up to ca. 80%.These mixing proportions are consistent with Sr, Nd and Os isotope and trace element constraints. A third minor component, either locally-exposed Paleoproterozoic mafic rocks or the lower crust is also required. However, the isotopic, trace element and Ni-Cu-platinum group element characteristics of the melt sheet can be accommodated without the involvement of an average lower crustal or meteoritic component.A major contribution of Huronian supracrustal material, which had a pre-impact thickness of up to 12 km, is required to explain the chemical characteristics of the impact melts, which also have a strong upper crustal affinity (e.g. Eu/Sm = 0.22, Rb/Sr = 0.2-0.35). As such, a shallower level of melting is apparent than that predicted by many previous impact models for the Sudbury event. This can be accommodated by considering approach trajectories for the impactor oblique to the Earth’s surface. In addition, the isotopic and trace element variability identified indicates that the melt sheet was heterogeneous at an early stage, and may not have been completely homogenised during crater formation. Our findings have significant implications for the nature of the Sudbury impact event, the evolution of the melt sheet and the crustal sources of metals contained in Sudbury’s world class Ni-Cu-PGE sulphide ores.  相似文献   

6.
Laser ablation inductively coupled plasma mass spectrometry was used to measure abundances of P, Cr, Fe, Co, Ni, Cu, Ga, Ge, As, Mo, Ru, Rh, Pd, Sn, Sb, W, Re, Os, Ir, Pt, and Au in metal grains in the Bencubbin-like chondrites Bencubbin, Weatherford, and Gujba to determine the origin of large metal aggregates in bencubbinites. A strong volatility-controlled signature is observed among the metal grains. The refractory siderophiles Ru, Rh, Re, Os, Ir, and Pt are unfractionated from one another, and are present in approximately chondritic relative abundances. The less refractory elements Fe, Co, Ni, Pd, and Au are fractionated from the refractory siderophiles, with a chondritic Ni/Co ratio and a higher than chondritic Pd/Fe ratio. The moderately volatile siderophile elements Ga, Ge, As, Sn, and Sb are depleted in the metal, relative to chondritic abundances, by up to 3 orders of magnitude. The trace siderophile element data are inconsistent with the following proposed origins of Bencubbin-Weatherford-Gujba metal: (1) condensation from the canonical solar nebula, (2) oxidation of an initially chondritic metal composition, and (3) equilibration with a S-rich partial melt. A condensation model for metal-enriched (×107 CI) gas is developed. Formation by condensation or evaporation in such a high-density, metal-enriched gas is consistent with the trace element measurements. The proposed model for generating such a gas is protoplanetary impact involving a metal-rich body.  相似文献   

7.
The paper presents the first analyses of major and trace elements in 19 lunar meteorites newly found in Oman. These and literature data were used to assay the composition of highland, mare, and transitional (highland-mare interface) regions of the lunar surface. The databank used in the research comprises data on 44 meteorites weighing 11 kg in total, which likely represent 26 individual falls. Our data demonstrate that the lunar highland crust should be richer in Ca and Al but poorer in mafic and incompatible elements than it was thought based on studying lunar samples and the first orbital data. The Ir concentration in the highland crust and the analysis of lunar crater population suggest that most lunar impactites were formed by a single major impact event, which predetermined the geochemical characteristics of these rocks. Lunar mare regions should be dominated by low-Ti basalts, which are, however, enriched in LREEs compared to those sampled by lunar missions. The typical material of mare-highland interface zones can contain KREEP and magnesian VLT basalts. The composition of the lunar highland crust deduced from the chemistry of lunar meteorites does not contradict the model of the lunar magma ocean, but the average composition of lunar mare meteorites is inconsistent with this concept and suggests assimilation of KREEP material by basaltic magmas. The newly obtained evaluations of the composition of the highland crust confirm that the Moon can be enriched in refractory elements and depleted in volatile and siderophile elements.  相似文献   

8.
The occurrence of shock metamorphic features substantiates an impact origin for the 1.85 Ga old Sudbury Structure, but this has not been universally accepted. Recent improvements in knowledge of large-scale impact processes, combined with new petrographic, geochemical, geophysical (LITHOPROBE) and structural data, allow the Sudbury Structure to be interpreted as a multi-ring impact structure. The structure consists of the following lithologies: Sudbury Breccia —dike breccias occurring up to 80 km from the Sudbury Igneous Complex (SIC); Footwall rocks and Footwall Breccia — brecciated, shocked crater floor materials, in part thermally metamorphosed by the overlying SIC; Sublayer and Offset Dikes, Main Mass of the SIC and Basal Member of the Onaping Formation (OF) — geochemically heterogeneous coherent impact melt complex ranging from inclusion-rich basal unit through a dominantly inclusion-free to a capping inclusion-rich impact melt rock; Grey Member of OF — melt-rich impact breccia (suevite); Green Member of OF — thin layer of fall back ejecta; Black Member of OF — reworked and redeposited breccia material; Onwatin and Chelmsford Formations — post-impact sediments. Observational and analytical data support an integrated step-by-step impact model for the genesis of these units. Analysis of the present spatial distribution of various impact-related lithologies and shock metamorphic effects result in an estimated original rim-to-rim diameter of the final crater of 200 or even 280 km for the Sudbury Structure, prior to tectonic thrusting and deformation during the Penokean orogeny.  相似文献   

9.
New drill core data are provided which support earlier interpretations that the Kalkkop structure, a 600–630 m wide, near-circular feature south-southwest of Graaff-Reinet in the Eastern Cape Province of South Africa, is a meteorite impact crater. Shock metamorphosed clasts in suevitic crater fill and Re---Os isotope data of this breccia indicate the presence of a minor (0.05%) meteoritic component in the suevite. The new data come from a 1992 borehole, which transected the complete crater fill and extended from about 160 to 380 m depth into the sedimentary basement belonging to the Koonap Formation of the Beaufort Group (Karoo Supergroup). Dyke breccias were found in the otherwise coherent Beaufort Group sediments forming the floor to the Kalkkop Crater. Mostly narrow zones of different breccia types, including injections of lithic impact breccia, a possible pseudotachylite veinlet and cataclasite occur predominantly in an approximately 65 m wide zone below the crater floor, with a few other cataclasite occurrences found lower down in the basement. Stratigraphical crater constraints provide information for the depth-diameter scaling and breccia volumes associated with such small, bowl-shaped impact craters formed in sedimentary targets.U---Th series dating of limestone samples from near the top and the bottom of the crater sediment fill constraints the age of the Kalkkop impact event to about 250 ± 50 ka, similar to the age of the Pretoria Saltpan impact crater, also located in South Africa. The variety of different breccia types (polymict and monomict impact breccias; local formations of pseudotachylitic and cataclastic breccias) observed in the crater fill of the Kalkkop Crater indicates the need to carefully distinguish different breccia types in order to assess the respective importance of each formation.  相似文献   

10.
  相似文献   

11.
Liquid Fe metal-liquid silicate partition coefficients for the lithophile and weakly-siderophile elements Ta, Nb, V, Cr, Si, Mn, Ga, In and Zn have been measured in multianvil experiments performed from 2 to 24 GPa, 2023-2873 K and at oxygen fugacities of −1.3 to −4.2 log units relative to the iron-wüstite buffer. Compositional effects of light elements dissolved in the metal liquid (S, C) have been examined and experiments were performed in both graphite and MgO capsules, specifically to address the effect of C solubility in Fe-metal on siderophile element partitioning. The results were used to examine whether there is categorical evidence that a significant portion of metal-silicate equilibration occurred under very high pressures during core-mantle fractionation on Earth. Although the depletion of V from the mantle due to core formation is significantly greater than that of Nb, our results indicate that both elements have similar siderophile tendencies under reducing conditions at low pressures. With increasing pressure, however, Nb becomes less siderophile than V, implying that average metal-silicate equilibration pressures of at least 10-40 GPa are required to explain the Nb/V ratio of the mantle. Similarly the moderately-siderophile, volatile element ratios Ga/Mn and In/Zn are chondritic in the mantle but both volatility and core-mantle equilibration at low pressure would render these ratios strongly sub-chondritic. Our results indicate that pressures of metal-silicate partitioning exceeding 30-60 GPa would be required to render these element ratios chondritic in the mantle. These observations strongly indicate that metal-silicate equilibration must have occurred at high pressures, and therefore support core-formation models that involve deep magma oceans. Moreover, our results allow us to exclude models that envisage primarily low-pressure (<1 GPa) equilibration in relatively small planetary bodies. We also argue that the core cannot contain significant U as this would require metal-silicate equilibration at oxygen fugacities low enough for significant amounts of Ta to have also been extracted from the mantle. Likewise, as In is more siderophile than Pb but similarly volatile and also quite chalcophile it would have been difficult for Pb to enter the core without reversing the relative depletions of these elements in the mantle unless metal-silicate equilibration occurred at high pressures >20 GPa.  相似文献   

12.
对加拿大萨德伯里撞击构造的考察及其启示   总被引：1，自引：0，他引：1  
简介了近年来萨德伯里撞击构造及超大型铜镍硫化物矿床的研究现状和作者现场考察所得的认识。记述了萨德伯里的撞击构造、陨石撞击事件及其构造效应、岩浆杂岩（SIC）和有关成因争论；叙述了该大陨石坑的变形和邻近格林威尔造山作用导致的NW－SE向缩短和剪切作用；还介绍了萨德伯里铜镍硫化物矿床撞击成矿假说；最后，特别提出在从事地球动力学和成矿作用动力学研究时，应十分注意类似萨德伯里陨石撞击灾变事件及损击成矿作用的研究。  相似文献   

13.
王丹  郭敬辉  马旭东 《岩石学报》2021,37(2):341-355
英云闪长岩-奥长花岗岩-花岗闪长岩(TTG)是地球早期大陆地壳最重要的组成部分。TTG的Nb/Ta比值变化不仅与它的成因相关,而且与早期构造环境和地壳分异过程关系紧密。本文选择阴山地块出露的TTG片麻岩及下地壳斜长角闪岩/麻粒岩包体作为研究对象,开展了寄主花岗闪长岩和同源镁铁质包体中的角闪石和黑云母的原位微区矿物的微量元素分析工作,以及TTG与非同源斜长角闪岩包体的全岩主微量元素分析工作。矿物化学研究结果表明,花岗闪长岩和同源镁铁质包体的角闪石具有相似的Mg#值,但是两者具有明显不同的Nb/Ta比值。镁铁质包体中的角闪石更富Cr、Ta,Nb/Ta比值为30~50;TTG岩石中的角闪石Cr和Ta含量偏低,但具有更高的Nb/Ta比值(38~70)。TTG和镁铁质包体中的角闪石Cr含量与Nb/Ta具有较好的负相关关系。全岩地球化学分析结果揭示,TTG片麻岩的具有高Nb/Ta比值(13~65,平均值31),斜长角闪岩和麻粒岩包体具有变化的Nb/Ta比值(10~56)。太古宙绿岩带中玄武质岩石的Nb/Ta平均值为~15,阴山地块斜长角闪岩和麻粒岩包体具有高的Nb/Ta比值,反映了这些代表基性下地壳的岩石经历了部分熔融作用或后期的交代作用,使其Nb/Ta比值发生改变。研究区具有高Nb/Ta比值的TTG可能来源于高Nb/Ta比值基性下地壳部分熔融,并继承了源区高Nb/Ta比值的特征。通过本文研究揭示,高Nb/Ta比值的TTG并非一定形成于俯冲带洋壳榴辉岩相部分熔融,下地壳富角闪石和黑云母的岩石部分熔融是形成高Nb/Ta比值TTG的一种重要途径。  相似文献   

14.
《International Geology Review》2012,54(12):1079-1102
In the past few years, meteoritic and cometary impacts have emerged as a major geological agent in the construction and evolution of planetary surfaces. Formation of complex central ring, peak ring and multiring craters involves excavation and melting of large volumes of crustal material. High-resolution geophysical mapping measuring gravity, magnetics, and topography of the Moon and Mars have recently provided information on the subsurface structure of large basins and aided in identifying buried giant craters. The terrestrial crater record has been significantly erased by tectonic, magmatic, and erosion processes and only a small proportion of impact structures remain. Record of multiring craters is limited to three examples: Vredefort, Sudbury and Chicxulub. Deep geophysical surveys and geochemical and isotopic studies of those craters provide means to evaluate the influence of large impacts on the lithospheric and crustal evolution by providing estimates of excavation depth and volume, amounts of material fragmented, ejected, vaporized and melted, and effects on the crustal stratigraphy and crustal thickness. Analyses on the melt from Vredefort, Sudbury, and Chicxulub indicate andesitic composition derived from lower-crustal material. The melt formed inside the lower transient cavity from lower crustal material that was then redistributed and emplaced in upper-crustal levels, resulting in crustal redistribution. Crystalline basement clasts fragmented and incorporated into the breccias show varying degrees of alteration but no significant thermal effects. Ejecta were deposited locally within the crater region and ballistic material and fine ejecta are globally distributed on the planetary surface. Impacts influence the crust–mantle boundary, with Moho uplift. Material from the mantle was not incorporated into the melt and impact breccias, indicating that the excavation cavities were confined to the lower crust. This is also apparently the case for the giant basins on the Moon, including the 2500 km diameter South Pole-Aitken Basin. Considering the numbers of large multiring basins, possible flux of large impacts, and effects on target surfaces, crustal scale redistribution of material during those large impacts has played a major role in the evolution of planetary surfaces.  相似文献   

15.
Analysing vertical and lateral distribution of minerals within an impact crater on lunar surface would aid in understanding the crustal compositions to a larger extent and provides clue about geological evolution of the Moon. The Chandrayaan-1 Moon Mineralogy Mapper (M3) and Lunar Reconnaissance Orbiter Camera (LROC) data have high spectral and spatial resolutions, which help in identifying the mineral compositions and morphological features of impact crater. Here we analyse mineral compositions and their correlations with crater morphology using M3 and LROC satellite data of Eijkman impact cater in SouthPole Atiken (SPA) basin. The result shows that low-Ca pyroxene (LCP) dominant rocks are identified on Central Peak (CP), Crater Floor (CF), Crater Wall (CW) and Crater Rim (CR). An olivine dominant rock is detected on the CW. Fe-Mg-spinel lithological unit is observed on the CF. The results implicate that, (i) Low-Ca pyroxene minerals could be from the lower crust during SPA main event; (ii) Presence of olivine and Fe-Mg-spinel lithology on the surface could be a later stage mafic intrusions or the lower-crustal material exposed on the surface due to major impacts.  相似文献   

16.
The mafic–ultramafic Fariman complex in northeastern Iran has been interpreted as a Paleo-Tethyan ophiolitic fragment with subduction- and plume-related characteristics as well as a basin deposit on an active continental margin. Contributing to this issue, we present geochemical, geochronological, and mineralogical data for transitional and tholeiitic basalts. Thermodynamic modeling suggests picritic parental magmas with 16–21 wt% MgO formed at plume-like mantle potential temperatures of ca. 1460–1600 °C. Rare pyroxene spinifex textures and skeletal to feather-like clinopyroxene attest to crystallization from undercooled magma and high cooling rates. Chromium numbers and TiO2 concentrations in spinel are similar to those in intraplate basalts. 40Ar–39Ar dating of magmatic hornblende yielded a plateau age of 276?±?4 Ma (2σ). Transitional basalt with OIB-like trace element characteristics is the predominant rock-type; less frequent are tholeiitic basalts with mildly LREE depleted patterns and picrites with intermediate trace element characteristics. All samples show MORB-OIB like Pb/Ce, Th/La, and Th/Nb ratios which preclude subduction-modified mantle sources and felsic crustal material. Tholeiitic basalts and related olivine cumulate rocks show MORB-like initial εNd values of +?9.4 to +?6.2 which define a mixing line with the data for the transitional basalts (εNd ca. +?2.6). Initial 187Os/188Os ratios of 0.124–0.293 support mixed sources with a high proportion of recycled mafic crust in the transitional basalts. High concentrations of highly siderophile elements are in agreement with the high mantle potential temperatures and inferred high-melting degrees. It is argued that the Fariman complex originated by melting of a mantle plume component as represented by the OIB-like transitional basalt and entrained asthenosphere predominant in the MORB-like tholeiites. Two lines of evidence such as association of the Fariman complex with pelagic to neritic sedimentary rocks and the tectonic position at the boundary of two continental blocks defined by ophiolites and accretionary complexes of different ages suggest formation in an oceanic domain. Thus, we interpret it as a fragment of an oceanic plateau, which escaped subduction and was accreted as exotic block in the Paleo-Tethyan suture zone.  相似文献   

17.
The mineralized sublayer at the base of the Sudbury Igneous Complex (SIC) consists of two variants, the noritic contact sublayer and radial and concentric quartz dioritic offset dykes. Both are characterized by the presence of significant quantities of Ni–Cu–PGE sulphides and by a prominent population of recrystallized diabasic-textured and melanocratic to ultramafic fragments. The two variants of the sublayer contain compositionally distinct inclusion populations and inclusion-bearing matrices. Contact sublayer and offset dykes hosted by north range granitoid footwall can be distinguished from those hosted by south range basaltic and metasedimentary footwall environments. The compositional variation in SIC rocks can be described in terms of contributions from exposed crustal rocks and differentiation of the resultant melt(s).

The basaltic inclusion population is characterized by hornfels recrystallization of the plagioclase, and is geochemically and isotopically identified with Huronian basalts which comprise the south range footwall, with (Ce/Yb)N ratios of around 2.5 and Nd1850 between −2 to −5. The melanocratic inclusions in the sublayer are typically coarse-grained and undeformed, with incompatible element contents and radiogenic isotopic compositions intermediate between those of the basaltic inclusions and those of the melt sheet, which has (Ce/Yb)N ratios of around 10 and Nd1850 around −9. Calculated crystallization models are consistent with derivation of the ultramafic inclusions by crystallization from a magma produced by mixing of molten basaltic footwall with basal melt sheet. It is proposed that the sublayer appeared as the marginal facies of a meteorite impact melt sheet as a result of footwall melting following the impact. This basal layer was progressively enriched in sulphides and mafic cumulates from above through differentiation during cooling. Offset dykes were emplaced and the magmas effectively removed from the system. Subsequently, continued evolution of the marginal facies produced the more mafic inclusions in the contact sublayer. No extracrustal (e.g., mantle) component is envisioned in this model to explain the silicate compositional distributions in the SIC, and mafic crustal rocks in the target zone are implicated as the metal source for the SIC deposits.  相似文献   


18.
Osmium, Ru, Ir, Pt, Pd and Re abundances and 187Os/188Os data on peridotites were determined using improved analytical techniques in order to precisely constrain the highly siderophile element (HSE) composition of fertile lherzolites and to provide an updated estimate of HSE composition of the primitive upper mantle (PUM). The new data are used to better constrain the origin of the HSE excess in Earth’s mantle. Samples include lherzolite and harzburgite xenoliths from Archean and post-Archean continental lithosphere, peridotites from ultramafic massifs, ophiolites and other samples of oceanic mantle such as abyssal peridotites. Osmium, Ru and Ir abundances in the peridotite data set do not correlate with moderately incompatible melt extraction indicators such as Al2O3. Os/Ir is chondritic in most samples, while Ru/Ir, with few exceptions, is ca. 30% higher than in chondrites. Both ratios are constant over a wide range of Al2O3 contents, but show stronger scatter in depleted harzburgites. Platinum, Pd and Re abundances, their ratios with Ir, Os and Ru, and the 187Os/188Os ratio (a proxy for Re/Os) show positive correlations with Al2O3, indicating incompatible behavior of Pt, Pd and Re during mantle melting. The empirical sequence of peridotite-melt partition coefficients of Re, Pd and Pt as derived from peridotites () is consistent with previous data on natural samples. Some harzburgites and depleted lherzolites have been affected by secondary igneous processes such as silicate melt percolation, as indicated by U-shaped patterns of incompatible HSE, high 187Os/188Os, and scatter off the correlations defined by incompatible HSE and Al2O3. The bulk rock HSE content, chondritic Os/Ir, and chondritic to subchondritic Pt/Ir, Re/Os, Pt/Re and Re/Pd of many lherzolites of the present study are consistent with depletion by melting, and possibly solid state mixing processes in the convecting mantle, involving recycled oceanic lithosphere. Based on fertile lherzolite compositions, we infer that PUM is characterized by a mean Ir abundance of 3.5 ± 0.4 ng/g (or 0.0080 ± 0.0009*CI chondrites), chondritic ratios involving Os, Ir, Pt and Re (Os/IrPUM of 1.12 ± 0.09, Pt/IrPUM = 2.21 ± 0.21, Re/OsPUM = 0.090 ± 0.002) and suprachondritic ratios involving Ru and Pd (Ru/IrPUM = 2.03 ± 0.12, Pd/IrPUM = 2.06 ± 0.31, uncertainties 1σ). The combination of chondritic and modestly suprachondritic HSE ratios of PUM cannot be explained by any single planetary fractionation process. Comparison with HSE patterns of chondrites shows that no known chondrite group perfectly matches the PUM composition. Similar HSE patterns, however, were found in Apollo 17 impact melt rocks from the Serenitatis impact basin [Norman M.D., Bennett V.C., Ryder G., 2002. Targeting the impactors: siderophile element signatures of lunar impact melts from Serenitatis. Earth Planet. Sci. Lett, 217-228.], which represent mixtures of chondritic material, and a component that may be either of meteoritic or indigenous origin. The similarities between the HSE composition of PUM and the bulk composition of lunar breccias establish a connection between the late accretion history of the lunar surface and the HSE composition of the Earth’s mantle. Although late accretion following core formation is still the most viable explanation for the HSE abundances in the Earth’s mantle, the “late veneer” hypothesis may require some modification in light of the unique PUM composition.  相似文献   

19.
The mid-Proterozoic Isortoq dike swarm in the Gardar Province, South Greenland, comprises a variety of alkaline rocks ranging from gabbroic to syenitic in composition. Major magmatic mineral phases are olivine, clinopyroxene, Fe–Ti oxides, amphibole, plagioclase and alkali feldspar. Quartz occurs in some samples as a late magmatic phase. Liquidus temperatures of olivine-bearing samples range between 1120 and 1145 °C and solidus temperatures are 850–930 °C. Calculated silica activities are highly variable between 0.53 and unity. Oxygen fugacities vary from −3 to +1 log units relative to the fayalite–magnetite–quartz buffer.

The rocks have MgO contents <6 wt.% with Mg# between 53 and 17. Primitive mantle-normalized trace element patterns show a relative enrichment of LIL elements with Ba peaks and Nb troughs. Clinopyroxenes show a general enrichment in REE relative to chondritic values with variable slightly positive to prominent negative Eu anomalies. Two of the dikes were dated with Sm–Nd three-point isochrons at 1190±44 and 1187±87 Ma, respectively. Initial 87Sr/86Sr ratios of mafic mineral separates range from 0.70289 to 0.70432 and initial Nd values vary from +0.3 to −10.7. Whole-rock initial 187Os/188Os ratios are highly variable including very radiogenic values of up to 7.967. δ18Ov-smow values of separated clinopyroxene and amphibole range from +5.2‰ to +6.2‰ and fall within the range of typical mantle-derived rocks, although mixing with a lower crustal component is permitted by the data. Using energy-constrained assimilation-fractional crystallization (EC-AFC) modeling equations, the Sr–Nd isotope data of the more radiogenic samples can successfully be modeled by addition of up to 10% lower crustal granulite-facies Archean gneisses as contaminants. The Os isotopic data also suggest the involvement of old radiogenic crust. In accordance with seismic data, we conclude that a wedge of Archean crust extends from West Greenland further to the south below the present erosion level.  相似文献   


20.
Equilibrium melt trace element contents are calculated from Proterozoic Nain Plutonic Suite (NPS) mafic and anorthositic cumulates, and from plagioclase and orthopyroxene megacrysts. Assumed trapped melt fractions (TMF) <20% generally eliminate all minor phases in most mafic cumulate rocks, reducing them to mixtures of feldspar, pyroxene and olivine, which would represent the high-temperature cumulus assemblage. In anorthosites, TMF <15% generally reduce the mode to a feldspar-only assemblage. All model melts have trace element profiles enriched in highly incompatible elements relative to normal mid-ocean ridge basalt (NMORB); commonly with negative Nb and Th anomalies. Most mafic cumulates yield similar profiles with constant incompatible element ratios, and can be linked through fractional crystallization. High K-La subtypes probably represent crust-contaminated facies. Mafic cumulates are inferred to belong to a tholeiitic differentiation series, variably contaminated by upper and lower crustal components, and probably related to coeval tholeiitic basaltic dyke swarms and lavas in Labrador. Model melts from anorthosites and megacrysts have normalized trace element profiles with steeper slopes than those calculated from mafic cumulates, indicating that mafic cumulates and anorthosites did not crystallize from the same melts. Orthopyroxene megacrysts yield model melts that are more enriched than typical anorthositic model melts, precluding an origin from parental melts. Jotunites have lower K-Rb-Ba-Y-Yb and higher La-Ce than model residues from fractionation of anorthositic model melts, suggesting they are not cosanguineous with them, but provide reasonable fits to evolved mafic cumulate model melts. Incompatible element profiles of anorthositic model melts closely resemble those of crustal melts such as tonalites, with steep Y-Yb-Lu segments that suggest residual garnet in the source. Inversion models yield protoliths similar to depleted lower crustal granulite xenoliths with aluminous compositions, suggesting that the incompatible trace element budget of the anorthosites are derived from remobilization of the lower crust. The similarity of the highly incompatible trace elements and LILE between anorthositic and mafic cumulate model melts suggests that the basalts parental to the mafic cumulates locally assimilated considerable quantities of the same crust that yielded the anorthosites. The reaction between underplating basalt and aluminous lower crust would have forced crystallization of abundant plagioclase, and remobilization of these hybrid plagioclase-rich mushes then produced the anorthosite massifs.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号