首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到10条相似文献，搜索用时 171 毫秒
1.
The determination of total water content (H2OT: 0.1-10 wt%) and water speciation (H2Omolecular/OH) in volcanic products by confocal microRaman spectrometry are discussed for alkaline (phonolite) and calcalkaline (dacite and rhyolite) silicic glasses. Shape and spectral distribution of the total water band (H2OT) at ∼3550 cm−1 show systematic evolution with glass H2OT, water speciation and NBO/T. In the studied set of silicic samples, calibrations based on internal normalization of the H2OT band to a band related to vibration of aluminosilicate network (TOT) at ∼490 cm−1 vary with glass peraluminosity. An external calibration procedure using well-characterized glass standards is less composition-dependent and provides excellent linear correlation between total dissolved water content and height or area of the H2OT Raman band. Accuracy of deconvolution procedure of the H2OT band to quantify water speciation in water-rich and depolymerized glasses depends on the strength of OH hydrogen bonding. System confocal performance, scattering from embedding medium and glass microcrystallinity have a crucial influence on accuracy of Raman analyses of water content in glass-bearing rocks and melt inclusions in crystals.  相似文献   

2.
OH structure of metamorphic fluids has been studied by high temperature infrared (IR) microspectroscopy on natural fluid inclusions contained in quartz veins, over the temperature range 25–370 °C. Blueschist-facies veins from Tinos island core complex (Cyclades, Greece) display H2O–NaCl–CaCl2–CO2 inclusions whereas greenschist-facies veins contain H2O–NaCl ± CO2 inclusions. From 25 to 370 °C, peak positions of OH stretching IR absorption bands increase quasi-linearly with slopes of 0.25 and 0.50 cm–1 °C–1 for inclusions trapped under blueschist and greenschist conditions, respectively. Extrapolation to 400 °C yield peak positions of 3,475 cm–1 for blueschist inclusions and 3,585 cm–1 for greenschist inclusions. Because the smaller wave number indicates the shorter hydrogen-bond distance between water molecules, fluids involved in the greenschist event have a loose structure compared with blueschist fluids. We suggest that these properties might correspond to a low wetting angle of fluids. This would explain the high mobility of aqueous fluids suggested by structural observation and stable isotope analysis.Editorial responsibility: J. Hoefs  相似文献   

3.
 The speciation of water dissolved in glasses along the join NaAlSi3O8-KAlSi3O8 has been investigated using infrared spectroscopy. Hydrous melts have been hydrothermally synthesized by chemical equilibration of cylinders of bubble-free anhydrous start glasses with water at 1040° C and 2 kbar. These melts have been isobarically and rapidly (200° C/s) “drop”-quenched to room temperature and then subsequently depressurized. The speciation of water in the quenched glasses reflects the state of water speciation at a temperature (the so-called fictive temperature) where the quenched-in structure of the glasses closely corresponds to the melt structure at equilibrium. This fictive temperature is detectable as the macroscopically measureable glass transition temperature of these melt compositions. A separate set of experiments using vesicular samples of the same chemistry has precisely defined the glass transition temperature of these melts (±5° C) on the basis of homogenization temperatures for water-filled fluid inclusions (Romano et al. 1994). The spectroscopic data on the speciation of water in these quenched glasses has been quantified using experimentally determined absorptivities for OH and H2O for each individual melt composition. The knowledge of glass transition temperatures, together with quantitative speciation data permits an analysis of the temperature dependence of the water speciation over the 113° C range of fictive temperatures obtained for these water-saturated melts. The variation of water speciation, cast as the equilibrium constant K where K = [H2O] [O m ]/[OH]2 is plotted versus the fictive temperature of the melt to obtain the temperature dependence of speciation. Such a plot describes a single linear trend of the logarithm of the equilibrium constant versus reciprocal temperature, implying that the exchange of K for Na has little influence on melt speciation of water. The enthalpy derived from temperature dependence is 36.5(±5) kJ/mol. The results indicate a large variation in speciation with temperature and an insensitivity of the speciation to the K–Na exchange. Received: 8 March 1995/Accepted: 6 June 1995  相似文献   

4.
A new approach was developed to measure the water content of silicate glasses using Raman spectroscopy, which is independent of the glass matrix composition and structure. Contrary to previous studies, the compositional range of our studied silicate glasses was not restricted to rhyolites, but included andesitic, basaltic and phonolitic glasses. We used 21 glasses with known water contents for calibration. To reduce the uncertainties caused by the baseline removal and correct for the influence of the glass composition on the spectra, we developed the following strategy: (1) application of a frequency-dependent intensity correction of the Raman spectra; (2) normalization of the water peak using the broad T–O and T–O–T vibration band at 850–1250 cm−1 wavenumbers (instead of the low wavenumber T–O–T broad band, which appeared to be highly sensitive to the FeO content and the degree of polymerization of the melt); (3) normalization of the integrated Si-O band area by the total number of tetrahedral cations and the position of the band maximum. The calibration line shows a ±0.4 wt% uncertainty at one relative standard deviation in the range of 0.8–9.5 wt% water and a wide range of natural melt compositions. This method provides a simple, quick, broadly available and cost-effective way for a quantitative determination of the water content of silicate glasses. Application to silicate melt inclusions yielded data in good agreement with SIMS data.  相似文献   

5.
Quantification of water content in silicate glasses is of vital significance in understanding magma evolution and metamorphic anataxis. Here we provide a method for the determination of total dissolved water content and water speciation in silicate melts by confocal laser Raman spectrometry based on a set of hydrous rhyolitic glasses. A series of alumino-silicate glasses with water contents from 0.33 to 9.05% m/m were synthesised in a piston cylinder apparatus. Synchrotron-FTIR mapping shows that these glasses have relatively homogeneous distributions of dissolved water. Total water contents of the glasses were precisely measured by TC/EA-MS and FTIR. Both external and internal calibration were established for the quantitative analysis of water content and water speciation in the silicate glasses based on excellent linear correlation between total dissolved water content and integrated area of the water Raman band. Furthermore, by decomposing the total water Raman bands into four Gaussians components, the relative concentration of water speciation (OH groups and molecules H2Om) dissolved in the glasses was determined with a similar trend to water speciation data derived from FTIR. We suggest that the relative concentration of water speciation can be estimated in rhyolitic glasses with 4–8% m/m H2O. Our work provides an accurate method to determine total water content and a potential tool to limit the relative concentration of water speciation dissolved in silicic glasses.  相似文献   

6.
Micro-Raman spectroscopy, even though a very promising technique, is not still routinely applied to analyse H2O in silicate glasses. The accuracy of Raman water determinations critically depends on the capability to predict and take into account both the matrix effects (bulk glass composition) and the analytical conditions on band intensities. On the other hand, micro-Fourier transform infrared spectroscopy is commonly used to measure the hydrous absorbing species (e.g., hydroxyl OH− and molecular H2O) in natural glasses, but requires critical assumptions for the study of crystal-hosted glasses. Here, we quantify for the first time the matrix effect of Raman external calibration procedures for the quantification of the total H2O content (H2OT = OH− + H2Om) in natural silicate glasses. The procedures are based on the calibration of either the absolute (external calibration) or scaled (parameterisation) intensity of the 3550 cm−1 band. A total of 67 mafic (basanite, basalt) and intermediate (andesite) glasses hosted in olivines, having between 0.2 and 4.8 wt% of H2O, was analysed. Our new dataset demonstrates, for given water content, the height (intensity) of Raman H2OT band depends on glass density, reflectance and water environment. Hence this matrix effect must be considered in the quantification of H2O by Raman spectroscopy irrespective of the procedure, whereas the parameterisation mainly helps to predict and verify the self-consistency of the Raman results. In addition, to validate the capability of the micro-Raman to accurately determine the H2O content of multicomponent aluminosilicate glasses, a subset of 23 glasses was analysed by both micro-Raman and micro-FTIR spectroscopy using the band at 3550 cm−1. We provide new FTIR absorptivity coefficients (ε3550) for basalt (62.80 ± 0.8 L mol−1 cm−1) and basanite (43.96 ± 0.6 L mol−1 cm−1). These values, together with an exhaustive review of literature data, confirm the non-linear decline of the FTIR absorptivity coefficient (ε3550) as the glass depolymerisation increases. We demonstrate the good agreement between micro-FTIR and micro-Raman determination of H2O in silicate glasses when the matrix effects are properly considered.  相似文献   

7.
Infrared spectroscopy has been used to study the speciation of CO2 in glasses near the NaAlO2-SiO2 join quenched from melts held at high temperatures and pressures. Absorption bands resulting from the antisymmetric stretches of both molecular CO2 (2,352 cm–1) and CO 3 2– (1,610 cm–1 and 1,375 cm–1) are observed in these glasses. The latter are attributed to distorted Na-carbonate ionic-complexes. Molar absorptivities of 945 liters/mole-cm for the molecular CO2 band, 200 liters/mole-cm for the 1,610 cm–1 band, and 235 liters/mole-cm for the 1,375 cm–1 band have been determined. These molar absorptivities allow the quantitative determination of species concentrations in the glasses with a precision on the order of several percent of the amount present. The accuracy of the method is estimated to be ±15–20% at present.The ratio of molecular CO2 to CO 3 2– in sodium aluminosilicate glasses varies little for each silicate composition over the range of total dissolved CO2 content (0–2%), pressure (15–33 kbar) and temperature (1,400–1,560° C) that we have studied. This ratio is, however, a strong function of silicate composition, increasing both with decreasing Na2O content along the NaAlO2-SiO2 join and with decreasing Na2O content in peraluminous compositions off the join.Infrared spectroscopic measurements of species concentrations in glasses provide insights into the molecular level processes accompanying CO2 solution in melts and can be used to test and constrain thermodynamic models of CO2-bearing melts. CO2 speciation in silicate melts can be modelled by equilibria between molecular CO2, CO 3 2– , and oxygen species in the melts. Consideration of the thermodynamics of such equilibria can account for the observed linear relationship between molecular CO2 and carbonate concentrations in glasses, the proposed linear relationship between total dissolved CO2 content and the activity of CO2 in melts, and observed variations in CO2 solubility in melts.  相似文献   

8.
Reaction between dissolved water and sulphide was experimentally investigated in soda-lime-silicate (NCS) and sodium trisilicate (NS3) melts at temperatures from 1000 to 1200 °C and pressures of 100 or 200 MPa in internally heated gas pressure vessels. Diffusion couple experiments were conducted at water-undersaturated conditions with one half of the couple being doped with sulphide (added as FeS or Na2S; 1500-2000 ppm S by weight) and the other with H2O (∼3.0 wt.%). Additionally, two experiments were performed using a dry NCS glass cylinder and a free H2O fluid. Here, the melt was water-saturated at least at the melt/fluid interface. Profiling by electron microprobe (sulphur) and infrared microscopy (H2O) demonstrate that H2O diffusion in the melts is faster by 1.5-2.3 orders of magnitude than sulphur diffusion and, hence, H2O can be considered as a rapidly diffusing oxidant while sulphur is quasi immobile in these experiments.In Raman spectra a band at 2576 cm−1 appears in the sulphide - H2O transition zone which is attributed to fundamental S-H stretching vibrations. Formation of new IR absorption bands at 5025 cm−1 (on expense of the combination band of molecular H2O at 5225 cm−1) and at 3400 cm−1 was observed at the front of the in-diffusing water in the sulphide bearing melt. The appearance and intensity of these two IR bands is correlated with systematic changes in S K-edge XANES spectra. A pre-edge excitation at 2466.5 eV grows with increasing H2O concentration while the sulphide peak at 2474.0 eV decreases in intensity relative to the peak at 2477.0 eV and the feature at 2472.3 eV becomes more pronounced (all energies are relative to the sulphate excitation, calibrated to 2482.5 eV). The observations by Raman, IR and XANES spectroscopy indicate a well coordinated S2− - H2O complex which was probably formed in the glasses during cooling at the glass transition. No oxidation of sulphide was observed in any of the diffusion couple experiments. On the contrary, XANES spectra from experiments conducted with a free H2O fluid show complete transformation of sulphide to sulphate near the melt surface and coexistence of sulphate and sulphide in the center of the melt. This can be explained by a lower H2O activity in the diffusion couple experiments or by the need of a sink for hydrogen (e.g., a fluid which can dissolve high concentration of hydrogen) to promote oxidation of sulphide by H2O via the reaction S2− + 4H2O = SO42− + 4H2. Sulphite could not be detected in any of the XANES spectra implying that this species, if it exists in the melt, it is a subordinate or transient species only.  相似文献   

9.
The H2O and H2 solubilities in an albite melt at 1200° C and 2 kbar over the entire range of gas phase composition, from pure hydrogen to pure water were studied in gas-media pressure vessels. The water solubility initially increases with increasing hydrogen content until a maximum of 9.19 wt% H2O atXH 2 v =0.1 is reached, withXH 2 v >0.1 the water solubility decreases. The hydrogen solubility curve has a maximum atXH 2 v =0.42 where the concentration reaches 0.206 wt% H2O. Over the entire compositional range1H NMR (nuclear magnetic resonance) spectra show distinct absorption lines due to protons bound to OH groups and to isolated firmly bound water molecules. In NMR and Raman spectra there were no bands attributable to the H–H vibrations of molecular hydrogen. The X-ray photo-electronic spectra of hydrogen-bearing glasses show the Si2p (99 eV) band which corresponds to the zero-valency silicon. The formation of OH groups and molecular water during interaction between hydrogen-bearing fluids and melts under reducing conditions has a qualitative effect, the same as for water dissolution. Another point of interest is that hydrogen-bearing melts undergo more depolymerization than do hydrous melts.  相似文献   

10.
The structure of H2O-saturated silicate melts, coexisting silicate-saturated aqueous solutions, and supercritical silicate liquids in the system Na2O·4SiO2–H2O has been characterized with the sample at high temperature and pressure in a hydrothermal diamond anvil cell (HDAC). Structural information was obtained with confocal microRaman and with FTIR microscopy. Fluids and melts were examined along pressure-temperature trajectories defined by the isochores of H2O at nominal densities, ρfluid, (from EOS of pure H2O) of 0.90 and 0.78 g/cm3. With ρfluid = 0.78 g/cm3, water-saturated melt and silicate-saturated aqueous fluid coexist to the highest temperature (800 °C) and pressure (677 MPa), whereas with ρfluid = 0.90 g/cm3, a homogeneous single-phase liquid phase exists through the temperature and pressure range (25–800 °C, 0.1–1033 MPa). Less than 5 vol% quartz precipitates near 650 °C in both experimental series, thus driving Na/Si-ratios of melt + fluid phase assemblages to higher values than that of the Na2O·4SiO2 starting material.Molecular H2O (H2O°) and structurally bonded OH groups were observed in coexisting melts and fluids as well as in supercritical liquids. Their OH/(H2O)-ratio is positively correlated with temperature. The OH/(H2O)° in melts is greater than in coexisting fluids. Structural units of Q3, Q2, Q1, and Q0 type are observed in all phases under all conditions. An expression of the form, 12Q3 + 13H2O2Q2 + 6Q1 + 4Q0, describes the equilibrium among those structural units. This equilibrium shifts to the right with increasing pressure and temperature with a ΔH of the reaction near 425 kJ/mol.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号