首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
王君鹏  沈水龙 《岩土力学》2013,34(11):3335-3339
近年来许多研究者致力于通过孔压静力触探(CPTU)确定土体的渗透系数,但是存在偏差大,而且不能从机制上清楚地解释孔压静力触探确定土体渗透系数的原因。为了应用孔压静力触探现场快速地确定土体的渗透系数,在总结前人对孔压静力触探确定土体渗透系数方法的研究基础上,提出孔压静力触探时锥头处呈球冠形孔隙水流动的计算模型,假定锥头处初始超孔隙水压力为负指数型分布,推导出土体渗透系数的表达式,并且结合现场实测数据,将所提出的方法与已有的方法进行对比分析。研究发现:所提出的方法扩大了现有方法的应用范围;渗透系数计算结果受锥头角度的影响较大,随着锥头角度的增大而增大;针对国际上通用的60°角的标准锥头,所提出的方法计算的渗透系数大于前人的方法,而且更接近室内外试验结果。  相似文献   

2.
用孔压静力触探求固结系数的研究   总被引:5,自引:0,他引:5  
为探讨利用孔压静力触探求取土层固结系数的可行性与规律 ,在珠江三角洲软土地区进行了大量孔压静力触探超孔压消散试验 .对试验场地、设备和方法作了简明扼要地介绍 ,重点分析了试验机理及结果 ,并将孔压消散试验估算的固结系数与室内固结试验得到的试验值以及现场沉降资料反算值作了比较 ,证明它们之间有很好的规律性 ,且用孔压静探所求固结系数更接近于实际值 .  相似文献   

3.
用孔压力触探求固结系数的研究   总被引:2,自引:0,他引:2  
为探讨利用孔压静力触探求取土层固结系数的可行性与规律,在珠江三角洲软土地区进行了大量孔压静力角探超孔压消散试验。对试验场地、设备和方法作了简明扼要地介绍,重点分析了试验机理及结果,并将孔压消散试验估算的固结系数与室内固结试验得到的试验值以及现场沉降资料反算值作了比较,证明它们之间有很好的规律性,且用孔压静探所求固结系数更接近于实际值。  相似文献   

4.
在沿海经济大开发背景下,区域大通道建设不断涌现。采用孔压静力触探(CPTU)方法获得锥尖阻力、侧壁摩阻力、孔隙水压力、摩阻比等参数,据此进行土层划分、工程分类,确定地基土的物理力学参数,估算单桩竖向承载力标准值,对影响试验数据精度的因素进行分析,并对海上孔压静力触探试验施工提出建议,为海洋静力触探技术的发展提供依据。  相似文献   

5.
强夯加固软土上覆填海砂层的试验研究   总被引:2,自引:0,他引:2  
强夯加固期间对上覆填海砂层的软土进行了孔压的监测,分析了强夯时软土中孔压的长消规律和随水平距离的变化及影响范围; 通过对强夯后静力触探试验成果的分析,研究了软土上覆砂层强夯加固的机理,并对强夯的有效影响深度和单点击数问题提出了看法。  相似文献   

6.
土的固结系数是软土地基计算与处理设计中的关键参数,本文根据先进的孔隙水压力静力触探技术现场测试求出的固结系数和室内固结试验所求固结系数,进行了大量统计对比研究,发现两者之间存在很好的线性相关关系,并论述了两种方法求取固结系数的原理及步骤,以及孔压静力触探求固结系数的许多优点。  相似文献   

7.
从实现孔压静力触探多种测量功能和自动测量与数据记录的要求出发,开发了一套孔压静力触探数据采集系统,并完成了TCY-1型测试仪以及PC机配套软件的设计与调试;介绍了其组成单元、工作原理与流程。系统具有测量精度高、数据容量大、体积小和功耗低等特点。应用表明,系统操作简便、配置灵活、工作效率高,可以广泛应用于工程勘测领域。  相似文献   

8.
加瑞  赵栋 《工程地质学报》2022,30(1):270-280
孔压静力触探试验(CPTU)是目前使用最为广泛的原位测试方法之一,但CPTU不能原位测量土体最基本的指标——密度。密度孔压静力触探试验(DCPTU)是把核子密度仪结合到孔压静力触探系统中,贯入过程中可以同时测量锥尖阻力、侧壁摩阻力、孔隙水压力和密度的一种新型原位测试方法。本文首先介绍了DCPTU的试验装置和密度测试理论;然后通过与室内试验结果对比评价了利用DCPTU测量砂土、黏土、填土地层以及海底淤泥的密度的可靠性,分析了非均质地层中DCPTU测量密度与真实密度的区别、并提出了真实密度剖面的推求方法;然后综述了DCPTU在判别软弱夹层、评价砂土的液化势、检验地基处理效果、检测块状填土中的空隙、调查浮泥层的厚度和密度分布等方面的工程应用;最后展望了DCPTU在工程勘察中的发展趋势和应用前景。  相似文献   

9.
孔隙水压力静力触探动态贯入过程的有限元模拟   总被引:3,自引:0,他引:3  
孔隙水压力静力触探作为一种新型的土体勘测技术已被广泛应用,但是,其机理的研究尚存在很大的不足。笔者系统分析了孔压触探的贯入特征,提出了“孔隙水压力体积基准值”的概念,借此推导出用土体体积变形量计算超孔隙水压力的公式。在此基础上,用轴对称有限单元法模拟探头的动态贯入过程,揭示应力-应变的变化特征,寻找超孔隙水压力生成与消散的规律,对孔压触探的机理进行了研究。  相似文献   

10.
孔压静力触探在上海地区的应用   总被引:1,自引:0,他引:1  
通过上海浦东国际机场跑道详勘中的实践,孔压静力触探在土层划分、估算土层固结系数等方面有很大的优越性。  相似文献   

11.
最大剪切模晕是土的基本力学特性参数,对土动力特性分析和岩土工程抗震设计有着重要的意义。目前最大剪切模量的确定丰要依赖于室内试验,土样的采取和室内试验既耗时又不能保证精度。以江苏北部里下河古泻湖相软土地区高速公路建设为工程背景,采用地震波孔压静力触探(SCPTU)和下孔法(DHT)进行了土层剪切波速的测试,基于SCPTU和DHT剪切波速测试资料建立了最大剪切模量Gmax与SCPTU测试参数之间的相关关系。结果表明:采用SCPTU测试的锥尖阻力和孔厂玉参数能够用于对软土的最大剪切模量的初步评价。  相似文献   

12.
13.
孔压触探测试中探头饱和问题的探讨   总被引:2,自引:0,他引:2  
孔压触探(CPTU)作为一种新型土体原位测试技术,日益引起人们的重视和推广,但CPTU测试中的一些技术环节尚需进一步探索和规范。本文对严重影响CPTU测试结果精度的探头饱和问题进行了探讨,指出探头饱和的重要性、一般方法、注意事项及检验措施。  相似文献   

14.
The use of the piezocone to provide detailed stratigraphic information as well as the piezometric and hydraulic characteristics of the soil is discussed. A resistivity module of external electrode rings attached to the piezocone developed at UBC to log and assess groundwater quality, soil porosity and saturation is also discussed together with basic theory and factors that affect in-situ electrical resistivity. Finally, the combination of the economical and rapid UBC-modified BAT groundwater penetration tool to provide ‘specific-depth’ groundwater samples for chemical and biological analysis and correlation with resistivity will also be explained. Field data from several case histories are presented to demonstrate the use of the resistivity piezocone in combination with groundwater sampling to provide screening data to locate permanent monitoring well systems or to develop remediation scenarios. The examples deal with acid mine drainage at a mine site, creosote contamination at a pressure treatment plant, seawater intrusion alongside a river outlet and seepage through a tailings dam.  相似文献   

15.
首先回顾了基于孔压静力触探(CPTU)测试确定前期固结压力的方法,通过连云港海相粘土场地进行的CPTU试验资料,以室内固结试验得到的前期固结压力作为参考值评估了经验方法预测前期固结压力的有效性。最简单的方法是直接建立前期固结压力和净锥尖阻力的关系,同时也是最有效的方法。  相似文献   

16.
田跃进  朱宜生 《江苏地质》2011,35(2):196-200
简要分析了我国CPT技术与国际CPT技术的差距,介绍了现代多功能CPTU测试系统、应用于CPT的传感器技术的发展、现代多功能CPTU技术的优势及SCPTU、RCPTU、VisCPT技术的新应用。同时,分析了软土地区多功能CPTU测试技术要点,包括测试计划的制定、孔压系统的饱和与标定、测试精度的保证、负值的分析及探头的保养等问题。  相似文献   

17.
电阻率孔压静力触探(RCPTU)除了包含常规的孔压静力触探测试功能之外,还可以提供连续的电阻率变化曲线,因而在环境岩土工程领域具有广阔的应用前景。电阻率是表征土体导电性的基本参数,是土的固有物性之一,每种类型的土都有固有的电阻率,其变异可能意味着受到污染。本文根据某农药厂污染场地的RCPTU试验结果,分析了不同污染物类型对电阻率的影响,并初步研究了基于电阻率指标的污染物分布与污染程度的鉴别。考虑到孔隙比或相对密实度对土体积电阻率也会产生较大影响,利用RCPTU可测相对密实度的优点,本文提出可将实测电阻率值等效至某一特定的相对密实度下,再将等效电阻率值与相应的背景值进行对比分析,根据等效电阻率值与背景值的偏差量与偏差率进行污染范围与污染程度的确定。结果表明电阻率指标能够精确反应污染物的存在与受污染的程度。  相似文献   

18.
Geotechnical and Geological Engineering - Do all the clayey soils have the same behavior in terms of the generation and dissipation of excess pore water pressure during the piezocone penetration...  相似文献   

19.
Coupled theory of mixtures for clayey soils   总被引:4,自引:0,他引:4  
In this work, elasto-plastic coupled equations are formulated in order to describe the time-dependent deformation of saturated cohesive soils (two-phase state). Formulation of these equations is based on the principle of virtual work and the theory of mixtures for inelastic porous media. The theory of mixtures for a linear elastic porous skeleton was first developed by Biot (Theory of elasticity and consolidation for a porous anisotropic solid, Journal of Applied Physics, 1955, 26, 188–185). An extension of Biot's theory into a nonlinear inelastic media was performed by Prevost (Mechanics of continuous porous media, International Journal of Engineering Science, 1980, 18, 787–800). The saturated soil is considered as a mixture of two deformable media, the solid grains and the water. Each medium is regarded as a continuum and follows its own motion. The flow of pore-water through the voids is assumed to follow Darcy's law. The coupled equations are developed for large deformations with finite strains in an updated Lagrangian reference frame. The coupled behavior of the two-phase materials (soil-water state) is implemented in a finite element program. A modified Cam-clay model is adopted and implemented in the finite element program in order to describe the plastic behavior of clayey soils. Penetration of a piezocone penetrometer in soil is numerically simulated and implemented into a finite element program. The piezocone penetrometer is assumed to be infinitely stiff. The continuous penetration of the cone is simulated by applying an incremental vertical movement of the cone tip boundary. Results of the finite element numerical simulation are compared with experimental measurements conducted at Louisiana State University using the calibration chamber. The numerical simulation is carried out for two cases. In the first case, the interface friction between the soil and the piezocone penetrometer is neglected. In the second case, interface friction is assumed between the soil and the piezocone. The results of the numerical simulations are compared with experimental laboratory measurements.  相似文献   

20.
This paper completes the study presented in the accompanying paper, and demonstrates a numerical algorithm for parameter prediction from the piezocone test (CPTU) data. This part deals with a development of neural network (NN) models which are able to map multi‐variable input data onto typical geotechnical characteristics and constitutive parameters of the modified Cam clay model, which has been applied in this study. The identification procedure is designed for the coupled hydro‐mechanical boundary value problem in normally‐and lightly overconsolidated clayey soils including partially drained conditions that may appear during cone penetration. The NN models are trained with pseudo‐experimental measurements derived with the aid of the numerical model of the piezocone test, presented in the accompanying paper. Different input configurations containing CPTU measurements and some complementary data are studied with respect to the accuracy of predicted parameter values. Finally, the performance of the developed NN predictors is tested with field CPTU data which are derived from three well‐documented characterization sites, and the obtained predictions are compared with benchmark laboratory results. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号