首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 500 毫秒
1.
We analysed isotopic compositions of metamorphic microdiamond secondary ion mass spectrometry. Typical microdiamonds in this dolomite marble show star-shaped morphologies (S-type) consisting of single-crystal cores and polycrystalline rims. Four S-type microdiamonds and two R-type microdiamonds (single crystals with rugged surfaces) were analysed using a 5 μm diameter ion beam. S-type microdiamonds have heterogeneous carbon isotopic compositions even in a single grain. Analysis of a typical S-type microdiamond (no. xx01-1-13) revealed clear difference in δ13C between core and rim. The rim shows lighter isotopic compositions ranging from??17.2‰ to??26.9‰, whereas the core is much heavier, with δ13C ranging from??9.3‰ to??13.0‰. The δ13C values of R-type microdiamonds fall into narrow ranges from??8.3‰ to??14.9‰ for no. xx01-1-10 and from??8.3‰ to??15.3‰ for no. xx01-1-16. These δ13C values are similar to those of the S-type microdiamond cores. The R-type probably formed at the same stage as the core of the S-type, whereas rim growth at a second stage did not occur or occurred very weakly in R-type microdiamonds. These carbon isotopic data support the two-stage growth of microdiamonds in the Kokchetav ultrahigh-pressure host rock. To explain the second stage growth of S-type microdiamonds, we postulate a simple fluid infiltration of light carbon from neighbouring gneisses into the dolomite marble.  相似文献   

2.
REE－fluorocarbonates as major REE minerals in the Bayan Obo deposit,the largest REE deposit in the world,were analyzed for their stable isotopic compositions,The δ^13 C and δ^18 O values of huanghoite,cebaite and bastnaesite from late-stage veins vary in the ranges of 7.8--4.0‰ and 6.7-9.4‰,respectively,These data are relatively similar to those of bastnaesites from banded ores:δ^13C-5.6--5.2‰ andδ^18O3.6-5.5‰.The REE fluorocarbonates from both late-staege veins and banded ores are characterized by lower δ^13 C and δ^18O values,especially the δ^18O values of bastnaesites from banded ores.Compared with them,the disseminated bastnaesits the dolomite-type ores possess rather highδ^13 C and δ^18O values,i.e.,-2.1-0.4‰ and 8.6-12.9‰ respectively.The high values are typical of the sedimentary host dolomite rocks as well as of the dolomite-type-ores.The carbon and oxygen isotopic characteristics of REE fluorocarbonate minerals provide new evidence for the hypothesis on the origin of Bayan Obo deposit-epigenetic hydrothermal metasomatism.  相似文献   

3.
An investigation using environmental isotopes (δ18O and δD) was conducted to gain insight into the hydrological processes of the Ganga Alluvial Plain, northern India. River-water, shallow-groundwater and lake-water samples from the Gomati River Basin were analyzed. During the winter season, the δ18O and δD compositions of the Gomati River water ranged from ?1.67 to ?7.62 ‰ and ?25.08 to ?61.50 ‰, respectively. Deuterium excess values in the river water (+0.3 to ?13 ‰) and the lake water (?20 ‰) indicate the significance of evaporation processes. Monthly variation of δ18O and δD values of the Gomati River water and the shallow groundwater follows a similar trend, with isotope-depleted peaks for δ18O and δD synchronized during the monsoon season. The isotopically depleted peak values of the river water (δ18O?=??8.30 ‰ and δD?=??57.10 ‰) can be used as a proxy record for the isotopic signature of the monsoon precipitation in the Ganga Alluvial Plain.  相似文献   

4.
Vein-stockwork magnesite in the Madenli area, sedimentary huntite-magnesite in the A?a??t?rtar area, and lacustrine hydromagnesite in the Salda Lake area are located in the Bey?ehir-Hoyran and Lycian nappe rocks around Isparta and Burdur, Southwest Anatolia. The aim of this study is to understand trace element contents and carbon-oxygen isotope ratios in different originated magnesite, magnesite bearing huntite, and hydromagnesite deposits. Also, the element contents and isotope ratios of the magnesite occurrences are to compare with each other and similar magnesite occurrences in Turkey and world. It is found that the Madenli magnesite occurrences in the ?arkikaraa?aç ophiolites, A?a??t?rtar magnesite bearing huntite deposits in the lacustrine rocks of the Miocene-Pliocene, and the Salda hydromagnesite deposits in lacustrine basin on the Ye?ilova ophiolites. The paragenesis contains a common carbonate mineral magnesite, less calcite, serpentine, smectite, dolomite, and talc in the Madenli magnesite occurrences, mostly huntite and locally magnesite, dolomite, calcite, illite, quartz, and smectite in the A?a??t?rtar huntite-magnesite occurrences, and only hydromagnesite mineral in the Salda Lake hydromagnesite occurrences. Vein and stockwork Madenli magnesite deposits were recognized by higher total iron oxide concentrations (mean 1.10 wt%) than sedimentary A?a??t?rtar magnesite bearing huntite (mean 0.13 wt%) and lacustrine Salda hydromagnesite (mean 0.22 wt%) deposits. It is suggested that high Fe content (up to 5%) in the magnesite associated with ultramafic rocks than those from sedimentary environments (≤1% Fe). Based on average Ni, Co, Ba, Sr, As and Zr contents in the magnesite deposits, average Ni (134.63 ppm) and Co (15.19 ppm) contents in the Madenli magnesite and Salda hydromagnesite (36.85 ppm for Ni, 3.15 ppm for Co) have higher values than A?a??t?rtar huntite + magnesite (7.67 ppm for Ni and 0.89 ppm for Co). Average Ni-Co contents of these deposits can have close values depending on ophiolite host rock. Average Ba values of the Madenli (108.09 ppm) and A?a??t?rtar (115.88 ppm) areas are higher than those of Salda hydromagnesite (13.15 ppm). Sediment-hosted A?a??t?rtar magnesite-huntite deposits have the highest Sr contents (mean 505.81 ppm) as reasonably different from ultrabasic rock-related Madenli magnesite (mean 38.76 ppm) and Salda hydromagnesite (mean 36.70 ppm). The highest Sr content of sedimentary A?a??t?rtar deposits reveals that Sr is related to carbonate rocks. As and Zr contents have the highest average values (As 52.76 ppm and Zr 9.67 ppm) in the A?a??t?rtar deposits different from Madenli magnesite (As 0.54 ppm and Zr 1.67 ppm) and Salda hydromagnesite (As 0.5 ppm and Zr 2.58 ppm) deposits. High As and Zr concentrations in the A?a??t?rtar magnesite-huntite deposits may come from volcanic rocks in near country rocks. The δ 13C (PDB) isotope values vary between ?10.1 and ?11.4‰ in the Madenli magnesite, 7.8 to 8.8‰ for huntite, 1.7 to 8.3‰ for huntite + magnesite and 4.0‰ for limestone + magnesite in the A?a??t?rtar huntite-magnesite deposits, and 4.4 to 4.9‰ for Salda Lake hydromagnesite. The sources of the CO2 are hydrothermal solutions, meteoric waters, groundwater dissolved carbon released from fresh water carbonates and marine limestone, soil CO2, and plant C3 in the Madenli magnesite, and may be deep seated metamorphic reactions in limestone and shales of rich in terms of organic matter. The sources of CO2 in A?a??t?rtar huntite and Salda hydromagnesite were meteoric water, groundwater dissolved inorganic carbon, fresh water carbonates, and marine limestone. The δ 18O (SMOW) isotope composition ranges from 26.8 to 28.1‰ in the Madenli magnesite, 30.4 to 32.4‰ for huntite and 29.8 to 35.5‰ for huntite + magnesite and 26.9‰ for limestone + magnesite in the A?a??t?rtar area, and 36.4 to 38.2‰ in the Salda Lake hydromagnesite. The Salda Lake hydromagnesite has heavier oxygen isotopic values than others. The sources of oxygen in the Madenli magnesite deposits are hydrothermal solutions, meteoric water, freshwater carbonates, and marine limestone, but the sources of oxygen of the A?a??t?rtar magnesite-huntite are meteoric water, fresh water carbonates, and marine limestone. The Salda Lake hydromagnesite has very high δ18O isotope values indicating a strong evaporitic environment. Magnesium (Mg+2) and silica are released by disintegration of very weathered-serpentinized ultrabasic rocks of all magnesite deposits and from partly dolomite and dolomitic limestone in the A?a??t?rtar magnesite bearing huntite deposits. In the A?a??t?rtar area, calcium (Ca+2) for huntite mineralization is provided by surrounding carbonate rocks. Based on isotopic data, host rocks, petrographic properties of the Madenli magnesite can be described as an ultramafic-associated hydrothermal vein mineralization corresponding to “Kraubath type” deposits, but A?a??t?rtar ve Salda Lake deposits are sedimentary mineralization (lacustrine/evaporitic) corresponding to “Bela Stena type” deposits. The estimated temperature using average δ18O isotope values is about 33.51 °C for Madenli magnesite, 48.33 °C for A?a??t?rtar huntite-magnesite, and 25 °C for Salda hydromagnesite. Based on isotope data, we can be say that the Madenli magnesite, A?a??t?rtar magnesite-huntite, and Salda hydromagnesite occur at low to moderate-low temperature water and alkaline (pH 8.5–10.5) under surface or near-surface conditions.  相似文献   

5.
The genesis of mineralized systems across the Mountain Freegold area, in the Dawson Range Cu–Au?±?Mo Belt of the Tintina Au province was constrained using Pb and stable isotope compositions and Ar–Ar and Re–Os geochronology. Pb isotope compositions of sulfides span a wide compositional range (206Pb/204Pb, 18.669–19.861; 208Pb/204Pb, 38.400–39.238) that overlaps the compositions of the spatially associated igneous rocks, thus indicating a magmatic origin for Pb and probably the other metals. Sulfur isotopic compositions of sulfide minerals are broadly similar and their δ34S (Vienna-Canyon Diablo Troilite (V-CDT)) values range from ?1.4 to 3.6 ‰ consistent with the magmatic range, with the exception of stibnite from a Au–Sb–quartz vein, which has δ34S values between ?8.1 and ?3.1 ‰. The δ34S values of sulfates coexisting with sulfide are between 11.2 and 14.2 ‰; whereas, those from the weathering zone range from 3.7 to 4.3 ‰, indicating supergene sulfates derived from oxidation of hypogene sulfides. The δ13C (Vienna Peedee Belemnite (VPDB)) values of carbonate range from ?4.9 to 1.1 ‰ and are higher than magmatic values. The δ18O (V-SMOW) values of magmatic quartz phenocrysts and magmatic least-altered rocks vary between 6.2 and 10.1 ‰ and between 5.0 and 10.1 ‰, respectively, whereas altered magmatic rocks and hydrothermal minerals (quartz and magnetite) are relatively 18O-depleted (4.2 to 7.9 ‰ and ?6.3 to 1.5 ‰, respectively). Hydrogen isotope compositions of both least-altered and altered igneous rock samples are D-depleted (from ?133 to ?161 ‰ Vienna-Standard Mean Ocean Water (V-SMOW)), consistent with differential magma degassing and/or post-crystallization exchange between the rocks and meteoric ground water. Zircon from a chlorite-altered dike has a U–Pb crystallization age of 108.7?±?0.4 Ma; whereas, the same sample yielded a whole-rock Ar–Ar plateau age of 76.25?±?0.53 Ma. Likewise, molybdenite Re–Os model ages range from 75.8 to 78.2 Ma, indicating the mineralizing events are genetically related to Late Cretaceous volcano-plutonic intrusions in the area. The molybdenite Re–Os ages difference between the nearby Nucleus (75.9?±?0.3 to 76.2?±?0.3 Ma) and Revenue (77.9?±?0.3 to 78.2?±?0.3 Ma) mineral occurrences suggests an episodic mineralized system with two pulses of hydrothermal fluids separated by at least 2 Ma. This, in combination with geological features suggest the Nucleus deposit represents the apical and younger portion of the Revenue–Nucleus magmatic-hydrothermal system and may suggest an evolution from the porphyry to the epithermal environments.  相似文献   

6.
The Maoniuping REE deposit, located about 22 km to the southwest of Mianning, Sichuan Province, is the second largest light REE deposit in China, subsequent to the Bayan Obo Fe-Nb-REE deposit in the Inner Mongolia Autonomous Region. Tectonically, it is located in the transitional zone between the Panxi rift and the Longmenshan-Jinpingshan orogenic zone. It is a carbonatite vein-type deposit hosted in alkaline complex rocks. The bastnaesite-barite, bastnaesite-calcite, and bastnaesite-microcline lodes are the main three types of REE ore lodes. Among these, the first lode is distributed most extensively and its REE mineralization is the strongest. Theδ34Sv-CDT values of the barites in the ore of the deposit vary in a narrow range of +5.0 to +5.1‰in the bastnaesite-calcite lode and +3.3 to +5.9‰in the bastnaesite-barite lode, showing the isotopic characteristics of magma-derived sulfur. Theδ13Cv-PDB values and theδ518OV-SMOW values in the bastnaesite-calcite lode range from -3.9 to -6.9‰and from +7.3 to +9.7‰, respectively, which fall into the range of "primary carbonatites", showing that carbon and oxygen in the ores of the Maoniuping deposit were derived mainly from a deep source. Theδ13Cv-PDB values of fluid inclusions vary from -3.0 to -5.6‰, with -3.0 to -4.0‰in the bastnaesite-calcite lode and -3.0 to -5.6‰in the bastnaesite-barite lode, which show characteristics of mantle-derived carbon. TheδDv-SMOW values of fluid inclusions range from -57 to -88‰, with -63 to -86‰in the bastnaesite-calcite lode and -57 to -88‰in the bastnaesite-barite lode, which show characteristics of mantle-derived hydrogen. Theδ18OH2OV-SMOW values vary from +7.4 to +8.6‰in the bastnaesite calcite lode, and +6.7 to +7.8‰in the bastnaesite-barite lode, almost overlapping the range of +5.5 to +9.5‰for magmatic water. The 4He content, R/Ra ratios are (13.95 to 119.58×10-6 (cm3/g)STP and 0.02 to 0.11, respectively, and 40Ar/36Ar is 313±1 to 437±2. Considering the 4He increase caused by high contents of radioactive elements, a mantle-derived fluid probably exists in the inclusions in the fluorite, calcite and bastnaesite samples. The Maoniuping deposit and its associated carbonatite-alkaline complex were formed in 40.3 to 12.2 Ma according to K-Ar and U-Pb data. All these data suggest that large quantities of mantle fluids were involved in the metallogenic process of the Maoniuping REE deposit through a fault system.  相似文献   

7.
The first data are reported on the carbon isotopic composition of diamond crystals from the Grib pipe kimberlite deposit of the Archangelsk diamond province (ADP). The δ13C value of the crystals ranges from ?2.79 to ?9.61‰. The isotopic composition of carbon was determined in three zoned crystals (δ13C of ?5.8 ?6.96 ‰, ?5.64/ ?5.85 ‰, and ?5.94/ ?5.69 ‰), two “diamond in diamond” samples (diamond inclusion with δ13C of ?4.05 and ?6.34 ‰ in host diamond crystals with δ13C of ?8.05 and ?7.54 ‰, respectively), and two samples of coated diamonds (cores with δ13C of ?6.98 and ?6.78‰ and coats with δ13C of ?7.51 and ?8.01 ‰, respectively). δ13C values were obtained for individual diamond crystals from bort-type aggregates (δ13C of ?4.24/ ?4.05 ‰, ?6.58/ ?7.48 ‰, and ?5.48/ ?6.08 ‰). Correlations were examined between the carbon isotopic composition of diamonds and their crystal morphology; the color; the concentration of nitrogen, hydrogen, and platelet defects; and mineral inclusions content. It was supposed that the observed δ13C variations in the crystals are most likely related to the fractionation of carbon isotopes rather than to the heterogeneity of carbon sources involved in diamond formation. The isotopic characteristics of diamonds from the Grib pipe were compared with those of previously investigated diamonds from the Lomonosov deposit. It was found that diamonds from these relatively closely spaced kimberlite fields are different; this also indicates the existence of spatially localized peculiarities of isotope fractionation in processes accompanying diamond formation.  相似文献   

8.
《Applied Geochemistry》2003,18(4):615-627
A study was conducted at the Fresh Kills landfill, Staten Island, New York to investigate the use of B and Li isotopes as tracers of mixing and flow in the groundwater environment. Four end-member waters are present at the Fresh Kills: freshwater, seawater, a geochemically distinct transitional groundwater (that occurs in the zone of mixing between seawater and freshwater) and landfill leachate. The δ11B and δ6Li values of end-member waters are distinct and have isotopic compositions that reflect the solute sources: freshwater δ11B∼+30‰, δ6Li∼−22‰; transition zone groundwaters δ11B∼+20‰, δ6Li∼−27‰; seawater δ11B+40 to +75‰, δ6Li−37 to−44‰; leachate δ11B∼+10‰ (δ6Li not determined). Those wells influenced by seawater exhibited a clear chemical mixing trend, with seawater contributions ranging from 3 to 85%. Well waters with a high percentage of seawater (>30%) had δ11B values that were within 1‰ of the seawater value (+40‰), whereas a trend of increasing δ11B values (+55 to +75‰) was observed for wells with a lower percentage of seawater (<30%). δ6Li values for well waters impacted by mixing with seawater ranged from−37 to−44‰, significantly more negative than pure seawater (−31‰). This deviation from the isotopic composition of seawater, for both δ11B and δ6Li values, represents non-conservative behavior and is likely the result of isotopic fractionation during ion exchange reactions. The wide range of δ11B and δ6Li values and the distinct isotopic compositions of end-member waters makes B and Li isotopes useful for recognizing solute sources, however isotopic fractionation may limit their use as simple tracers of groundwater flow and mixing.  相似文献   

9.
The Jiapigou gold belt (>150 t Au), one of the most important gold-producing districts in China, is located at the northeastern margin of the North China Craton. It is composed of 17 gold deposits with an average grade around 10 g/t Au. The deposits are hosted in Archean gneiss and TTG rocks, and are all in shear zones or fractures of varying orientations and magnitudes. The δ34S values of sulfide from ores are mainly between 2.7?‰ and 10?‰. The Pb isotope characteristics of ore sulfides are different from those of the Archean metamorphic rocks and Mesozoic granites and dikes, and indicate that they have different lead sources. The sulfur and lead isotope compositions imply that the ore-forming materials might originate from multiple, mainly deep sources. Fluid inclusions in pyrite have 3He/4He ratios of 0.6 to 2.5 Ra, whereas their 40Ar/36Ar ratios range from 1,444 to 9,805, indicating a dominantly mantle fluid with a negligible crustal component. δ18O values calculated from hydrothermal quartz are between ?0.2?‰ and +5.9?‰, and δD values of the fluids in the fluid inclusions in quartz are from ?70?‰ to ?96?‰. These ranges suggest dominantly magmatic water with a minor meteoric component. The noble gas isotopic data, along with the stable isotopic data, suggest that the ore-forming fluids have a dominantly mantle source with minor crustal addition.  相似文献   

10.
Twenty three groups of thermomineral springs in eastern Chukotka with the discharge temperature of 2 to 97°C and mineralization of 1.47 to 37.14 g/l are studied and compared with surface freshwater from their localities. The δD and δ18O values in surface waters vary from ?121.4 to ?89.5‰ and from ?16.4 to ?11.1‰, respectively, while respective values in thermomineral waters range from ?134.2 to ?92.5‰ and from ?17.6 to ?10.5‰. The δD value in surface waters decreases from the east to west, i.e., toward interior areas of the peninsula. Hydrothermal springs most depleted in deuterium (δD < ?120‰) are localized in the geodynamically active Kolyuchinskaya-Mechigmen Depression. According to the proposed formation model of Chukotka thermomineral waters, their observed chemical and isotopic characteristics could result from the mixing (in different proportions) of surface waters with the deep-sourced isotopically light mineralized component (δD ≈ ?138‰, δ18O ≈ ?19‰, M = 9.5?14.7 g/l). The latter originates most likely from subpermafrost waters subjected to slight cryogenic metamorphism.  相似文献   

11.
High-precision Zn isotopic variations are reported for carbonaceous chondrites (CC), equilibrated (EOC) and unequilibrated (UOC) ordinary chondrites, iron meteorites from the IAB-IIICD (nonmagmatic) and IIIA (magmatic) groups, and metal from the Brenham pallasite. For irons, δ65Cu values are also reported. Data have also been obtained on a coarse-grained type-B calcium-, aluminum-rich refractory inclusion (CAI) from Allende and on acid leaches of Allende (CV3), Krymka (LL3), and Charsonville (H6). Variations expressed as δ66Zn (deviation in parts per thousand of 66Zn/64Zn in samples relative to a standard) spread over a range of 0.3‰ for carbonaceous chondrites, 2‰ for ordinary chondrites, and 4‰ for irons.The measured 66Zn/64Zn, 67Zn/64Zn, and 68Zn/64Zn ratios vary linearly with mass difference and define a common isotope fractionation line with terrestrial samples, which demonstrates that Zn was derived from an initially single homogeneous reservoir. The δ66Zn values are correlated with meteorite compositions and slightly decrease in the order CI, CM, CV-CO, and to UOC. The isotopically light Zn of Allende CAI and the acid-resistant residues of Allende and Krymka show that the light component is associated with refractory material, presumably minerals from the spinel-group. This, together with the reverse correlation between relative abundances of light Zn isotopes and volatile element abundances, suggests that Zn depletion in planetary bodies with respect to CI cannot be ascribed to devolatilization of CI-like material. These observations rather suggest that refractory material reacted with a gas phase enriched in the lighter Zn isotopes. Alternatively, chondrules with their associated rims should carry a light Zn isotopic signature. The δ66Zn values of unequilibrated chondrites are rather uniform, whereas equilibrated chondrites show distinctly more isotopic variability.The values of δ65Cu-δ66Zn in irons define two trends. The moderate and positively correlated Cu and Zn isotope variations in IIIA and pallasite samples probably reflect crystallization of silicate, sulfide, and solid metal from the liquid metal. The range of δ66Zn values of the IAB-IIICD group is large (>3‰) and contrasts with the moderate fractionation of Cu isotopes. We interpret this feature and the negative δ66Zn-δ65Cu correlation as reflecting mixing, possibly achieved by percolation, between metals from a regolith devolatilized at low temperature (enriched in heavy zinc) and metallic liquids formed within the parent body.  相似文献   

12.
Seagrass beds form an important part of the coastal ecosystem in many parts of the world but are very sensitive to anthropogenic nutrient increases. In the last decades, stable isotopes have been used as tracers of anthropogenic nutrient sources and to distinguish these impacts from natural environmental change, as well as in the identification of food sources in isotopic food web reconstruction. Thus, it is important to establish the extent of natural variations on the stable isotope composition of seagrass, validating their ability to act as both tracers of nutrients and food sources. Around the world, depending on the seagrass species and ecosystem, values of seagrass N normally vary from 0 to 8?‰ δ15N. In this study, highly unusual seagrass N isotope values were observed on the east coast of Qatar, with significant spatial variation over a scale of a few metres, and with δ15N values ranging from +2.95 to ?12.39?‰ within a single bay during March 2012. This pattern of variation was consistent over a period of a year although there was a seasonal effect on the seagrass δ15N values. Seagrass, water column and sediment nutrient profiles were not correlated with seagrass δ15N values and neither were longer-term indicators of nutrient limitation such as seagrass biomass and height. Sediment δ15N values were correlated with Halodule uninervis δ15N values and this, together with the small spatial scale of variation, suggest that localised sediment processes may be responsible for the extreme isotopic values. Consistent differences in sediment to plant 15N discrimination between seagrass species also suggest that species-specific nutrient uptake mechanisms contribute to the observed δ15N values. This study reports some of the most extreme, negative δ15N values ever noted for seagrass (as low as ?12.4?‰) and some of the most highly spatially variable (values varied over 15.4?‰ in a relatively small area of only 655 ha). These results are widely relevant, as they demonstrate the need for adequate spatial and temporal sampling when working with N stable isotopes to identify food sources in food web studies or as tracers of anthropogenic nutrients.  相似文献   

13.
Large variations are reported in the B concentrations and isotopic ratios of river and thermal spring waters in Guadeloupe, Lesser Antilles. Rivers have δ11B values around 40‰ and B concentrations lower than 30 μg/L, while thermal springs have δ11B of 8–15‰ and B concentrations of 250–1000 μg/L. River samples strongly impacted by hydrothermal inputs have intermediate δ11B and B contents. None of these surface water samples have δ11B comparable to the local unweathered volcanic rocks (around 0‰), implying that a huge isotopic fractionation of 40‰ takes place during rock weathering, which could be explained by preferential incorporation of 10B during secondary mineral formation and adsorption on clays, during rock weathering or in the soils. The soil-vegetation B cycle could also be a cause for such a fractionation. Atmospheric B with δ11B of 45‰ represents 25–95% of the river B content. The variety of the thermal spring chemical composition renders the understanding of B behavior in Guadeloupe hydrothermal system quite difficult. Complementary geochemical tracers would be helpful.  相似文献   

14.
Brine extremely rich in potassium, boron and bromine has been discovered from the Middle Triassic Leikoupo Formation at a depth of 4300 m in Sichuan Province. It contains ～50 g/L of K+, >92 g/L of Na+, >12 g/L of B2O3, >2.36 g/L of Br? and ～0.030 g/L of I+. The solid precipitates during evaporation at 25°C include KB5O8·4H2O, K2B4O7·3H2O, MgCl2·6H2O and KMgCl3·6H2O. The brine ranges from 2.2‰ to 2.8‰ (SMOW) in δ18O, ? 38‰ – ? 53‰ (SMOW) in δD, 15.6‰ in δ34S, and 13.5‰–15.1‰ in δ11B. These data, particularly the isotopic composition of boron, indicate that the brine has a composite derivation from marine and nonmarine brines and dissolved marine evaporites in the Triassic system.  相似文献   

15.
Uranium-series dated stalagmites from Oman indicate that pluvial conditions prevailed from 6.3 to 10.5, 78 to 82, 120 to 130, 180 to 200 and 300 to 330 kyr B.P.; all of these periods coincide with peak interglacials. Oxygen (δ18O) and hydrogen (δD) isotope ratios of speleothem calcite and fluid inclusions reveal the source of moisture and provide information on the amount of precipitation, respectively. δ18O and δD values of stalagmites deposited during peak interglacials vary between ?8 and ?4 ‰ (VPDB) and ?53 and ?20‰ (Vienna Standard Mean Ocean Water [VSMOW]) respectively, whereas modern stalagmites range from ?2.6 to ?1.1‰ in δ18O (VPDB) and ?7.6 and ?3.3‰ in δD (VSMOW), respectively. The growth and isotopic records indicate that during peak interglacial periods, the limit of the monsoon rainfall was shifted far north of its present location and each pluvial period was coinciding with an interglacial stage of the marine oxygen isotope record.  相似文献   

16.
Carbonate concretions in the Lower Carboniferous Caton Shale Formation contain diagenetic pyrite, calcite and barite in the concretion matrix or in different generations of septarian fissures. Pyrite was formed by sulphate reduction throughout the sediment before concretionary growth, then continued to form mainly in the concretion centres. The septarian calcites show a continuous isotopic trend from δ13C=?28·7‰ PDB and δ18O=?1·6‰ PDB through to δ13C=?6·9‰ PDB and δ18O=?14·6‰ PDB. This trend arises from (1) a carbonate source initially from sulphate reduction, to which was added increasing contributions of methanogenic carbonate; and (2) burial/temperature effects or the addition of isotopically light oxygen from meteoric water. The concretionary matrix carbonates must have at least partially predated the earliest septarian cements, and thus used the same carbonate sources. Consequently, their isotopic composition (δ13C=?12·0 to ?10·1‰ PDB and δ18O=?5·7 to ?5·6‰ PDB) can only result from mixing a carbonate cement derived from sulphate reduction with cements containing increasing proportions of carbonate from methanogenesis and, directly or indirectly, also from skeletal carbonate. Concretionary growth was therefore pervasive, with cements being added progressively throughout the concretion body during growth. The concretions contain barite in the concretion matrix and in septarian fissures. Barite in the earlier matrix phase has an isotopic composition (δ34S=+24·8‰ CDT and δ18O=+16·4‰ SMOW), indicating formation from near‐surface, sulphate‐depleted porewaters. Barites in the later septarian phase have unusual isotopic compositions (δ34S=+6 to +11‰ CDT and δ18O=+8 to +11‰ SMOW), which require the late addition of isotopically light sulphate to the porewaters, either from anoxic sulphide oxidation (using ferric iron) or from sulphate dissolved in meteoric water. Carbon isotope and biomarker data indicate that oil trapped within septarian fissures was derived from the maturation of kerogen in the enclosing sediments.  相似文献   

17.
The Weiquan Ag-polymetallic deposit is located on the southern margin of the Central Asian Orogenic Belt and in the western segment of the Aqishan-Yamansu arc belt in East Tianshan,northwestern China. Its orebodies, controlled by faults, occur in the lower Carboniferous volcanosedimentary rocks of the Yamansu Formation as irregular veins and lenses. Four stages of mineralization have been recognized on the basis of mineral assemblages, ore fabrics, and crosscutting relationships among the ore veins. Stage I is the skarn stage(garnet + pyroxene), Stage Ⅱ is the retrograde alteration stage(epidote + chlorite + magnetite ± hematite 士 actinolite ± quartz),Stage Ⅲ is the sulfide stage(Ag and Bi minerals + pyrite + chalcopyrite + galena + sphalerite + quartz ± calcite ± tetrahedrite),and Stage IV is the carbonate stage(quartz + calcite ± pyrite). Skarnization,silicification, carbonatization,epidotization,chloritization, sericitization, and actinolitization are the principal types of hydrothermal alteration. LAICP-MS U-Pb dating yielded ages of 326.5±4.5 and 298.5±1.5 Ma for zircons from the tuff and diorite porphyry, respectively. Given that the tuff is wall rock and that the orebodies are cut by a late diorite porphyry dike, the ages of the tuff and the diorite porphyry provide lower and upper time limits on the age of ore formation. The δ~(13)C values of the calcite samples range from-2.5‰ to 2.3‰, the δ~(18)O_(H2 O) and δD_(VSMOW) values of the sulfide stage(Stage Ⅲ) vary from 1.1‰ to 5.2‰ and-111.7‰ to-66.1‰, respectively,and the δ~(13)C, δ~(18)O_(H2 O) and δD_(V-SMOW) values of calcite in one Stage IV sample are 1.5‰,-0.3‰, and-115.6‰, respectively. Carbon, hydrogen, and oxygen isotopic compositions indicate that the ore-forming fluids evolved gradually from magmatic to meteoric sources. The δ~(34)S_(V-CDT) values of the sulfides have a large range from-6.9‰ to 1.4‰, with an average of-2.2‰, indicating a magmatic source, possibly with sedimentary contributions. The ~(206)Pb/~(204)Pb, ~(207)Pb/~(204)Pb, and ~(208)Pb/~(204)Pb ratios of the sulfides are 17.9848-18.2785,15.5188-15.6536, and 37.8125-38.4650, respectively, and one whole-rock sample at Weiquan yields~(206)Pb/~(204)Pb,~(207)Pb/~(204)Pb, and ~(208)Pb/~(204)Pb ratios of 18.2060, 15.5674, and 38.0511,respectively. Lead isotopic systems suggest that the ore-forming materials of the Weiquan deposit were derived from a mixed source involving mantle and crustal components. Based on geological features, zircon U-Pb dating, and C-H-OS-Pb isotopic data, it can be concluded that the Weiquan polymetallic deposit is a skarn type that formed in a tectonic setting spanning a period from subduction to post-collision. The ore materials were sourced from magmatic ore-forming fluids that mixed with components derived from host rocks during their ascent, and a gradual mixing with meteoric water took place in the later stages.  相似文献   

18.
Noncarbonate (combustion) and carbonate (acid decomposition) carbon were separately analyzed in 18 granitic rocks from a group of related Tertiary intrusions near Crested Butte, Colorado, and 14 mafic and ultramafic rocks from various localities in the western United States. Among the granites, carbonate carbon ranges from nil to 0.76 per cent with δC13-values from ?5.6 to ? 9.0‰ (vs PDB); noncarbonate carbon varies from 32–360 ppm with δC13-values from ?19.7 to ?26.6‰, The mafic and ultramafic rocks have carbonate carbon contents ranging from 53 ppm to about 2 per cent with δC13-values from + 2.9 to ?10.3‰; noncarbonate carbon varies from 26 to 150 ppm with δC13-values of ?22.2 to ? 27.l‰ For these samples, carbonate carbon ranges from 12.0 to 29.4‰ heavier than coexisting noncarbonate carbon. This consistent difference between δC13 of carbonate and noncarbonate carbon may be an isotopic fractionation effect. Because the specific indigenous form of noncarbonate (combustion) carbon is in doubt, conclusive interpretations regarding isotopic equilibration and fractionation cannot be made.These results have bearing on the assessment of the isotopic composition of mantle carbon and consequently are germane to the question of the origin (source) and history of crustal carbon. If mantle carbon is isotopically similar to noncarbonate (combustion) carbon, i.e. δC13-values from ?19.7 to ? 27.1‰, then a simple mantle degassing source for crustal carbon is improbable. Such a result would indicate an additional source of crustal carbon such as from a primitive atmosphere or extra-terrestrial accretion.  相似文献   

19.
Iron Isotopic Compositions of Geological Reference Materials and Chondrites   总被引：2，自引：0，他引：2  
High‐precision iron isotopic compositions for Fe‐bearing geological reference materials and chondrites with a wide range of matrices (e.g., silicates, oxides, organic‐bearing materials) are reported. This comprehensive data set should serve as a reference for iron isotopic studies across a range of geological and biological disciplines for both quality assurance and inter‐laboratory calibration. Where comparison is available, the iron isotopic compositions of most geological reference materials measured in this study were in agreement with previously published data within quoted uncertainties. Recommendations for the reporting of future iron isotopic data and associated uncertainties are also presented. Long‐term repeat analyses of all samples indicate that highly reproducible iron isotopic measurements are now obtainable (± 0.03‰ and ± 0.05‰ for δ56Fe and δ57Fe, respectively).  相似文献   

20.
A new compilation of N‐isotope and abundance data for metasedimentary rocks, and hyrdothermal micas that proxy for bulk crust, show systematic patterns. (1) δ15N values of kerogen in Precambrian cherts are more negative relative to siliciclastic counterparts, probably due to a mantle hydrothermal component. (2) There is a secular trend from average δ15N 15.3 ± 1.8‰ in Archean shales, through intermediate values in the Proterozoic, to Phanerozoic counterparts where δ15N averages +3.5‰. (3) Hydrothermal micas in metamorphic hydrothermal systems of Palaeozoic and Mesozoic age that proxy for crust have δ15N within the range of contemporaneous sedimentary rocks. (4) Hydrothermal micas track the secular trend of δ15N for kerogen from 2.7 Ga to the Phanerozoic. (5) Within Precambrian datasets δ15N does not increase with decreasing N content; accordingly, high δ15N values cannot stem either from metamorphism or form Rayleigh fractionation. (6) Previous studies show isotopic shifts during metamorphism are only +1 to +3‰ up to amphibolite facies. Values of 10–24‰ are attributed to a high δ15N Archean atmosphere, a residual signature of CI carbonaceous chondrites where δ15N is +30‰ to + 42‰.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号