首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 39 毫秒
1.
Recently, the electrical resistivity tomography (ERT) technique has been increasingly applied to underground cavity detection filled with groundwater and/or clay. In this study, an ERT survey was conducted to examine the spatial distribution and shape of underground cavities in a karst area in Korea. Numerical ERT modeling and inversion were carried out to select appropriate field survey parameters. Two geological structures, similar to those that exist in the field survey area, were modeled: a sinkhole model and a vein-type structure. Electrode configurations using pole–pole, pole–dipole, dipole–pole, and dipole–dipole arrays were tested with the two geologic models and compared. The numerical modeling showed that the resistivity distribution of the ERT tomogram using the pole–dipole array produced the best representation of the two models. The pole–dipole and pole–pole array configurations were applied in an ERT field survey using six boreholes. The field ERT results show that cavity areas filled with clay or groundwater appeared as low-resistivity anomalies in the limestone formation. This was particularly evident in the inclined vein-type structures attributed to fracture zones, where the field data were similar to the modeling results. Therefore, the ERT technique could be effectively used for detecting underground limestone cavities under similar geological conditions as those at our study area.  相似文献   

2.
Electrical resistivity surveying for delineating seawater intrusion was performed in the Dibdibba aquifer in the area between the cities of Al-Zubair–Safwan and Al-Zubair–Umm Qasr in the vicinity of Khor AL-Zubair Channel, Basrah governorate, southern Iraq. Fourteen 2D resistivity profiles with a total length of 14 km were collected in the study area. The resistivity sections were compared with lithological data extracted from 11 boreholes. Thirty-nine groundwater samples were collected within the area and analyzed for chemical constituents; internal hydrogeological reports and unpublished studies were also evaluated. Results reveal the existence of three major resistivity layers, ranging from 0.1 to 130 Ωm at various depths and locations. The first layer has very low electrical resistivity (0.1–5 Ωm) representing a layer saturated with saltwater intruded from Khor AL-Zubair Channel. The second layer shows resistivity in the range of 5–130 Ωm, attributed to a transition zone and an unaffected zone saturated with brackish groundwater. The last resistivity layer (<?3 Ωm) represents coarse-grain sediments saturated with saline groundwater. Furthermore, a hard clay bed (Jojab) appears with a resistivity of 3–7 Ωm in all 2D imaging lines within a depth of 20–28 m. Electrical conductivity (EC) measurements from seven wells collected in 2014 and 2016 show a positive EC difference increasing landward with an average increase of 1927 µS/cm. In addition, six chemical relationships (Na/Cl, [Ca?+?Mg]/[HCO3?+?SO4], SO4/HCO3, SO4/Cl, Mg/Ca and Cl/[HCO3?+?CO3]) are used to detect the source of salinity in groundwater. This study proves that extensive use of high-resolution 2D imaging sections, alongside lithological and hydrogeological data, can serve as a useful tool to delineate the boundaries between aquifers, identify hydraulic boundaries between groundwater with different salinities and allocate hard clay layers between the upper and lower Dibdibba aquifer. In general, the combination of 2D imaging and hydrochemistry enables conceptualization of the hydrogeological situation in the subsurface and characterization of the salinity source, here seawater intrusion, in the study area. There have been no studies published so far on the characteristics of saltwater intrusion in the study area, and this study is considered to be important for monitoring and studying the intrusion and regression of seawater.  相似文献   

3.
Electrical Resistivity Tomography is a versatile, fast and cost effective technique for mapping the shallow subsurface anomaly. It covers a wide spectrum of resistivity ranging from <1 Ohm.m to several thousands of Ohm.m. In this paper applications and utility of two-dimensional Electrical Resistivity Tomography (ERT) technique are discussed to look into huge data density coverage, different signal strengths of data from subsurface and their implications in resolving the aquifer zones, related geological structures etc. of the substratum ranging from alluvium to tectonically disturbed hard rock ridge region of the country. The major advantages and flexibility of ERT over conventional resistivity methods are also discussed.  相似文献   

4.
The use of resistivity sounding and two-dimensional (2-D) resistivity imaging was investigated with the aim of delineating and estimating the groundwater potential in Keffi area. Rock types identified are mainly gneisses and granites. Twenty-five resistivity soundings employing the Schlumberger electrode array were conducted across the area. Resistivity sounding data obtained were interpreted using partial curve matching approach and 1-D inversion algorithm, RESIST version 1.0. The 2-D resistivity imaging was also carried out along two traverses using dipole–dipole array, and the data obtained were subjected to finite element method modeling using DIPRO inversion algorithm to produce a two-dimensional subsurface geological model. Interpretation of results showed three to four geoelectrical layers. Layer thickness values were generally less than 2 m for collapsed zone, and ranged from 5 to 30 m for weathered bedrock (saprolite). Two major aquifer units, namely weathered bedrock (saprolite) aquifer and fractured bedrock (saprock) aquifer, have been delineated with the latter usually occurring beneath the former in most areas. Aquifer potentials in the area were estimated using simple schemes that involved the use of three geoelectrical parameters, namely: depth to fresh bedrock, weathered bedrock (saprolite) resistivity and fractured bedrock (saprock) resistivity. The assessment delineated the area into prospective high, medium and low groundwater potential zones.  相似文献   

5.
In this study, a groundwater exploration survey was conducted using the DC Resistivity (DCR) method in a hydrogeological setting containing a perched aquifer. DCR data were gathered and an electrical tomography section was recovered using conventional four-electrode instruments with a Schlumberger array and a two-dimensional (2D) inversion scheme. The proposed scheme was tested over a synthetic three-dimensional (3D) subsurface model before deploying it in a field situation. The proposed method indicated that gathering data with simple four-electrode instruments at stations along a line and 2D inversion of datasets at multiple stations can recover depth intervals of the studied aquifer in the hydrogeological setting even if it has a 3D structure. In this study, 2D inversion of parallel profiles formed a pseudo-3D volume of the subsurface resistivity structures and mapped out multiple resistive (>25 ohm·m) bodies at shallow (between 50–100 m) and deep sections (>150 m). In general, the proposed method is convenient to encounter geological units that have limited vertical and spatial extensions in any direction and presents resistivity contrast from groundwater-bearing geologic materials.  相似文献   

6.
An integrated survey program involving geological, hydrogeological and geophysical techniques has been employed to characterize the aquifer geometry, recharge and circulation dynamics of thermal springs within a shallow aquifer system in Ethiopia. The selected springs for the case study are Sodere and Gergedi, which are situated within the tectonically active Main Ethiopian Rift (MER). Geologically, the studied springs are located on Plio-Quaternary volcanic rocks. The geophysical results indicate the presence of subsurface weak zones represented by extensional tectonics and weathering zones which are responsible for thermal water circulation and facilitate recharge from the adjacent surface-water bodies. The structures inferred by the resistivity survey, both sounding and electrical tomography, present contrasts in rock resistivity response. The anomalous zones in the magnetic data are in good agreement with the zones that are revealed by geological mapping and surface manifestation of the thermal water discharge zones. The shallow aquifer of the central MER is under the influence of thermal water, which increases the groundwater temperature and mineral content.  相似文献   

7.
Drilling information, historical water table levels, groundwater salinity records of the existing water wells in Wadi Al Bih area, United Arab Emirates, were stored in a geodatabase and used to characterize the geological and hydrogeological settings of this area. A 2D earth resistivity imaging survey was conducted for the first time in the Northern UAE to determine the potential of the Quaternary aquifer and its groundwater quality in the areas where there are no monitoring wells. The results of the chemical analyses of the collected groundwater samples together with the inversion results of the resistivity data were used to draw a total salinity map and determine the spatial variations in groundwater quality. The inversion results of the 2D earth resistivity imaging data indicated that the Quaternary aquifer in the study area is in a good connection with the underlying carbonate aquifer. It also indicated that the carbonate aquifer is of major regional and vertical extension and it contains the fresh water in this area. The data stored in the developed database were used to produce different types of geopotential maps.  相似文献   

8.
The use of wastewater for irrigation in sandy soil increases the pollution risk of the soil and may infiltrate to the shallow groundwater aquifer. In such environment, some important parameters need to be obtained for monitoring the wastewater in the unsaturated zone over the aquifer. These parameters include clay content, heterogeneities of the upper soils, depth to the aquifer and the variations of groundwater quality. In the present work, the efficiency of DC resistivity method in forms of 1-D and 2-D measurements was studied for wastewater monitoring in the Gabal el Asfar farm, northeast of Cairo, Egypt. Forty-one Schlumberger soundings (VES) were performed then followed by three pole-dipole 2-D profiles along some considered regions within the area. The resistivity measurements were integrated with the boreholes, hydrogeological and hydrochemical (surface and groundwater samples) information to draw a clear picture for the subsurface conditions. The obtained results were presented as cross sections and 3-D visualization to trace the clay intercalations within the unsaturated zone. In addition, a vulnerability map was created using the obtained results from 1-D Schlumberger survey and confirmed with the 2-D resistivity profiling. The obtained results have shown that the 2-D resistivity imaging technique is a powerful tool for mapping the small-scale variability within the unsaturated zone and the wastewater infiltration. However, limitations of resistivity techniques were observed in the area with limited resistivity contrast such as thin clay layers with brackish water background. Under that condition, the measured pattern of resistivity distributions depends on the applied electrode array, electrode spacing and using the available geological information during the inversion process.  相似文献   

9.
Identifying a good site for groundwater exploration in hard rock terrain is a challenging task. In hard rocks, groundwater occurs in secondary porosity developed due to weathering, fracturing, faulting, etc., which is highly variable within short distance and contributing to near-surface inhomogeneity. In such situations topographic, hydrogeological and geomorphological features provide useful clues for the selection of suitable sites. Initially, based on satellite imagery, topographical, geomorphological and hydrogeological features, an area of about 149 km2 was demarcated as a promising zone for groundwater exploration in the hard rock tract of Seethanagaram Mandal, Vizianagaram District, Andhra Pradesh, India. A total of 50 Vertical Electrical Soundings (VES) were carried out using Wenner electrode configuration. An interactive interpretation of the VES data sharpened the information inferred from geomorphological and hydrogeological reconnaissance. Ten sites were recommended for drilling. Drilling with Down-The-Hole Hammer (DTH) was carried out at the recommended sites down to 50 to 70 m depths. The interpreted VES results matched well with the drilled bore well lithologs. The yields of bore wells vary from 900 to 9000 liters per hour (lph).  相似文献   

10.
为准确获取水文地质参数,进而为矿井防治水、矿井涌水量计算以及地下水评价等提供可靠的参数,以煤田地质勘探中实测的人工井液电阻率测井曲线为依据,结合岩心精细描述、抽水试验、常规地球物理测井等技术获得的资料进行综合分析。研究表明:人工井液电阻率测井技术在煤田水文地质勘探中不仅可以准确划分含隔水层的性质,确定其位置,分析含水层之间的补给关系,检查钻孔止水效果,计算各含水层钻孔截面流量,亦可研究地下水流体特征,评价地下水水质参数以及监测生产矿井导水裂隙带高度。因此,人工井液电阻率测井能够提高煤田水文地质勘探成果利用率,实现地质勘探信息的最大化利用,从而更好地为矿井设计、建设及矿井生产服务,保障矿井安全。   相似文献   

11.
针对河南省新乡市凤泉区严重缺水现状,利用高密度电阻率法、高密度电阻率法与激发极化对称四极测深组合在水文地质条件复杂的松散层和基岩干旱地区勘查地下水,结合水文地质资料和成井条件所定的井位,后经施工钻孔验证,定井成功率100%,解决了人、畜急需用水问题。通过以上两种方法结合或单一方法在该地区不同水文地质条件下的实际应用和应用效果分析,总结出针对该地区特定的水文地质条件选择高密度电阻率法、高密度电阻率法与激发极化法组合模式。密度电阻率法和激发极化法组合模式在该地区地下水勘查中的运用提高了地质解释的准确性和可靠性,值得在类似水文地质条件和地区推广应用。  相似文献   

12.
The presence of hard rock in Mount Betung has caused the misalignment of the groundwater aquifers,and resulted in many drilling failures for groundwater.An integrated geophysics method using gravity survey and Geoelectric Vertical Electrical Soundings(VES)were conducted to study the effect of basement and hard rock on groundwater prospects.From the gravity method,38 mapping points were carried out randomly,with a distance of 1-2 km in-between.Meanwhile,from the geoelectric method,51 VES points were acquired at the foot of Mount Betung.The acquisition was conducted with a Schlumberger configuration with AB/2=1 m to 250 m.The results show the Bouguer Anomaly in the west is 50-68 mgal due to the presence of hard rock in Mount Betung.This anomaly responds to relatively shallow hard rocks near surface.Hard rocks composed of andesite and breccia normally present at the depth of 5-180 m during well construction.Resistivity isopach mapping from VES data(at AB/2=50 m,100 m,and 150 m)shows the dominant constituents of hard rock.Fractures in hard rock contribute to secondary porosity,which could be a prospect zone that transmit groundwater.This finding shows that the fractures are randomly scattered,causing several well failures that have been worked.Furthermore,the fractures in the hard rock at the foot of Mount Betung acts as conduits between recharge at Mount Betung and the aquifer in the Bandar Lampung Basin.  相似文献   

13.
Deltaic aquifers are complex due to the important heterogeneity of their structure and their hydrogeological functioning. Auger drilling provides localized, but very robust geological and hydrogeological information, while geophysical surveys can provide integrated subsurface information. An effective, easy-to-use and low-cost methodology combining geological/hydrogeological information from Auger drillings and the results from three geophysical techniques (Electromagnetic mapping, Electrical Sounding and Electrical Resistivity Tomography) is being developed to characterize the structure of a typical Mediterranean deltaic aquifer. A first hypothesis about hydrodynamic properties of the aquifer is also obtained. The study area is located in the Rhone delta (Middle Camargue/southern France). Integration of geophysical and geological techniques allowed identifying the presence and lateral extension of the Saint-Ferréol paleochannel, the vertical contact between lagoonal–fluvial deposits and the marine clayed silt that separate the superficial aquifer from the deeper aquifer. Likewise, high north–south heterogeneity and east–west homogeneity were highlighted in the study area. Presence of clay in sandy deposits in the low areas implies changes in lateral hydraulic permeability. This fact, jointed to the low hydraulic gradient, suggests a slow groundwater flow in the local system. The Rhone delta presents a typical configuration of a Mediterranean deltaic aquifer, thus this methodological approach can be used for similar deltaic Mediterranean systems.  相似文献   

14.
A comprehensive hydrogeochemical study was carried out in the Paleozoic Basses-Laurentides sedimentary rock aquifer system in Québec over a 1500 km2 study area. Groundwater samples were collected at 153 sites, characterizing all geological and hydrogeological units to a maximum depth of 140 m. Groundwater was analyzed for major, minor and trace inorganic constituents, stable isotopes δ 2H, δ 18O, and δ 13C of dissolved inorganic carbon (DIC), and some samples were analyzed for 3H, and 14C of DIC. The regional distribution of groundwater types shows that the hydrogeological conditions exert a dominant control on the major ions chemistry of groundwater. Preferential recharge areas are characterized by tritiated Ca-Mg-HCO3 groundwater, and confined conditions by submodern Na-HCO3 and Na-Cl groundwater types. Two groundwater end-members are identified in the aquifer system, modern meteoric water and Pleistocene Champlain Sea water. The region displays significant variations of groundwater geochemistry and quality controlled by glaciation, Champlain Sea invasion, lithological rock diversity, and flow system scales. This situation leads to varied groundwater types and origins within a restricted area.  相似文献   

15.
The subsurface data are a basic requirement for the set up of hydrogeological framework. Geographic information systems (GIS) tools have proved their usefulness in hydrogeology over the years which allow for management, synthesis, and analysis of a great variety of subsurface data. However, standard multi-layered systems are quite limited for modeling, visualizing, and editing subsurface data and geologic objects and their attributes. This paper presents a methodology to support the implementation of hydrogeological framework of the multi-layered aquifer system in Nabeul–Hammamet (NH) coastal region (NE, Tunisia). The methodology consists of (1) the development of a complete and generally accepted hydrogeological classification system for NH aquifer system (2) the development of relational databases and subsequent GIS-based on geological, geophysical and hydrogeological data, and (3) the development of meaningful three-dimensional geological and aquifer models, using GIS subsurface software, RockWorks 2002. The generated 3-D geological models define the lithostratigraphy and the geometry of each depositional formation of the region and delineate major aquifers and aquitards. Where results of the lithologic model revealed that there is a wide range of hydraulic conductivities in the modeled area, which vary spatially and control the groundwater flow regime. As well, 17 texturally distinct stratigraphic units were identified and visualized in the stratigraphic model, while the developed aquifer model indicates that the NH aquifer system is composed of multi-reservoir aquifers subdivided in aquifers units and separated by sandy clay aquitards. Finally, this study provides information on the storing, management and modeling of subsurface spatial database. GIS has become a useful tool for hydrogeological conceptualization and groundwater management purposes and will provide necessary input databases within different groundwater numerical models.  相似文献   

16.
Groundwater is a treasured earth’s resource and plays an important role in addressing water and environmental sustainability. However, its overexploitation and wide spatial variability within a basin and/or across regions are posing a serious challenge for groundwater sustainability. Some parts of southern West Bengal of India are problematic for groundwater occurrence despite of high rainfall in this region. Characterization of an aquifer in this area is very important for sustainable development of water supply and artificial recharge. Electrical resistivity surveys using 1-D and 2-D arrays were performed at a regular interval from Subarnarekha River at Bhasraghat (south) to Kharagpur (north) to map the lithological variations in this area. Resistivity sounding surveys were carried out at an interval of 2–3 km. Subsurface resistivity variation has been interpreted using very fast simulated annealing (VFSA) global optimization technique. The analysis of the field data indicated that the resistivity variation with depth is suitable in the southern part of the area and corresponds to clayey sand. Interpreted resistivity in the northern part of the area is relatively high and reveals impervious laterite layer. In the southern part of the area resistivity varies between 15 and 40 Ωm at a depth below 30 m. A 2-D resistivity imaging conducted at the most important location in the area is correlated well with the 1-D results. Based on the interpreted resistivity variation with depth at different locations different types of geologic units (laterite, clay, sand, etc.) are classified, and the zone of interests for aquifer has been demarcated. Study reveals that southern part of the area is better for artificial recharge than the northern part. The presence of laterite cover in the northern part of the area restricts the percolation of rainwater to recharge the aquifer at depth. To recharge the aquifer at depth in the northern part of the area, rainwater must be sent artificially at depth by puncturing laterite layers on the top. Such studies in challenging areas will help in understanding the problems and finding its solution.  相似文献   

17.
The coastal aquifer of the Plio-Quaternary delta sediment deposits of the Vélez river (province of Málaga, Spain) presents a highly irregular basement morphology and widely varying fill thickness (10–80 m between neighbouring sectors). The basin, which is tectonically controlled, is filled with lutite facies alternating with channel-filling rudites. This detrital aquifer is affected by seasonal seawater intrusion–extrusion processes due to increasing withdrawal of groundwater for human consumption and irrigation during dry periods.A study was performed to improve the hydrogeological knowledge of this coastal aquifer system. The study examined the morphology of the impervious substratum, the facies distribution and the position of the seawater wedge. For this purpose, an Electrical Resistivity Tomography (ERT) geophysical technique was used and the tomographic data were calibrated using geological observations and borehole studies. An analysis was carried out to compare the direct information obtained from the 35 boreholes with the indirect data corresponding to the four electrical tomography profiles. In the study, over 9660 resistivity data points were processed.The ERT profiles perfectly corroborated the information derived from the boreholes. The profiles made it possible to detect thickness changes, lithological changes and the presence of faults. Moreover, from a hydrogeologic standpoint, this research technique is capable of detecting the position of the phreatic level and, in coastal aquifers such as the one examined in this study, the possible horizontal or vertical penetration of seawater intrusion. Therefore, the electrical geophysical prospecting based on ERT can be highly useful in areas lacking sufficient geological information and/or mechanical borehole data.  相似文献   

18.
The characterization of river–aquifer connectivity in karst environments is difficult due to the presence of conduits and caves. This work demonstrates how geophysical imaging combined with hydrogeological data can improve the conceptualization of surface-water and groundwater interactions in karst terrains. The objective of this study is to understand the association between the Bell River and karst-alluvial aquifer at Wellington, Australia. River and groundwater levels were continuously monitored, and electrical resistivity imaging and water quality surveys conducted. Two-dimensional resistivity imaging mapped the transition between the alluvium and karst. This is important for highlighting the proximity of the saturated alluvial sediments to the water-filled caves and conduits. In the unsaturated zone the resistivity imaging differentiated between air- and sediment-filled karst features, and in the saturated zone it mapped the location of possible water- and sediment-filled caves. Groundwater levels are dynamic and respond quickly to changes in the river stage, implying that there is a strong hydraulic connection, and that the river is losing and recharging the adjacent aquifer. Groundwater extractions (1,370 ML, megalitres, annually) from the alluvial aquifer can cause the groundwater level to fall by as much as 1.5 m in a year. However, when the Bell River flows after significant rainfall in the upper catchment, river-leakage rapidly recharges the alluvial and karst aquifers. This work demonstrates that in complex hydrogeological settings, the combined use of geophysical imaging, hydrograph analysis and geochemical measurements provide insights on the local karst hydrology and groundwater processes, which will enable better water-resource and karst management.  相似文献   

19.
The tannery effluents discharged by the existing units on either side of the Palar river at Ambur town (known for tannery industry), has resulted in vertical and lateral spread of pollution. The study area of 55.3 km2 is situated on a granitic terrain of Archaean age with undulating topography and hillocks. The shallow aquifers, in flood plain and valley fills of the river are highly polluted (with EC: 15340 μS/cm) by tannery effluents making groundwater unfit for any use, hence the local population (20000) face health hazards and shortage of potable water. Hydrogeological, geophysical and in-situ groundwater quality measurement were carried out to demarcate fresh groundwater zones and to delineate lateral and vertical extent of pollution. The results show, brackish aquifer was characterized by low order of resistivity (<20 Ω-m) with a thickness of 8.5 to 28 m located in the flood plains, valley fills, and partially in hard rock formations, whereas the fresh water aquifer resistivity varying from 23 to 216 Ω-m in hard rock. Further, these results were correlated with the water quality data and Ground Penetrating Radar (GPR) signals. The integrated studies revealed that pollution due to tannery effluents has spread over an area of 33.4 km2 (60.4 %) on either side of the river and only a small area of 21.9 km2 (39.6 %) was identified as fresh groundwater zone, which has to be conserved and exploited in sustainable manner for future generations.  相似文献   

20.
以贵州省安龙县1∶50 000水文地质图幅为例,采用含水层探采井的水质、水量监测数据,分析不同含水层水资源赋存特征及其与水化学的相关性。研究结果表明:（1）研究区含水层可分为纯碳酸盐岩管道含水层、非纯碳酸盐岩裂隙含水层、碎屑岩裂隙含水层、松散岩类孔隙含水层4种类型,各含水层中地下水水化学类型均以HCO-Ca?Mg型为主;（2）除非纯碳酸盐岩含水层探采井的降深与水体中Mg2+、HCO-3浓度呈现出显著的负相关性（R2=-0.77/-0.74）外,其余离子浓度与钻井单位涌水量、降深的相关性均不显著,相关系数(R2)均小于0.3;（3）非纯碳酸盐岩含水层和松散岩类含水层的总矿化度（TDS）、总硬度（TH）含量均比纯碳酸盐岩含水层低5 mg?L-1以上,TDS、TH的高值区均集中于纯碳酸盐岩含水层中,而低值区则分布于松散岩类含水层。   相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号