首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到10条相似文献,搜索用时 98 毫秒
1.
The Chinese Continental Scientific Drilling (CCSD) main drill hole (0–3000 m) in Donghai, southern Sulu orogen, consists of eclogite, paragneiss, orthogneiss, schist and garnet peridotite. Detailed investigations of Raman, cathodoluminescence, and microprobe analyses show that zircons from most eclogites, gneisses and schists have oscillatory zoned magmatic cores with low-pressure mineral inclusions of Qtz, Pl, Kf and Ap, and a metamorphic rim with relatively uniform luminescence and eclogite-facies mineral inclusions of Grt, Omp, Phn, Coe and Rt. The chemical compositions of the UHP metamorphic mineral inclusions in zircon are similar to those from the matrix of the host rocks. Similar UHP metamorphic PT conditions of about 770 °C and 32 kbar were estimated from coexisting minerals in zircon and in the matrix. These observations suggest that all investigated lithologies experienced a joint in situ UHP metamorphism during continental deep subduction. In rare cases, magmatic cores of zircon contain coesite and omphacite inclusions and show patchy and irregular luminescence, implying that the cores have been largely altered possibly by fluid–mineral interaction during UHP metamorphism.

Abundant H2O–CO2, H2O- or CO2-dominated fluid inclusions with low to medium salinities occur isolated or clustered in the magmatic cores of some zircons, coexisting with low-P mineral inclusions. These fluid inclusions should have been trapped during magmatic crystallization and thus as primary. Only few H2O- and/or CO2-dominated fluid inclusions were found to occur together with UHP mineral inclusions in zircons of metamorphic origin, indicating that UHP metamorphism occurred under relatively dry conditions. The diversity in fluid inclusion populations in UHP rocks from different depths suggests a closed fluid system, without large-scale fluid migration during subduction and exhumation.  相似文献   


2.
In order to identify and characterise fluids associated with metamorphic rocks from the Chaves region (North Portugal), fluid inclusions were studied in quartz veinlets, concordant with the main foliation, in graphitic-rich and nongraphitic-rich lithologies from areas with distinct metamorphic grade. The study indicates multiple fluid circulation events with a variety of compositions, broadly within the C–H–O–N–salt system. Primary fluid inclusions in quartz contain low salinity aqueous–carbonic, H2O–CH4–N2–NaCl fluids that were trapped near the peak of regional metamorphism, which occurred during or immediately after D2. The calculated PT conditions for the western area of Chaves (CW) is P=300–350 MPa and T500 °C, and for the eastern area (CE), P=200–250 MPa and T=400–450 °C. A first generation of secondary fluid inclusions is restricted to discrete cracks at the grain boundaries of quartz and consists of low salinity aqueous–carbonic, H2O–CO2–CH4–N2–NaCl fluids. PT conditions from the fluid inclusions indicate that they were trapped during a thermal event, probably related with the emplacement of the two-mica granites.

A second generation of secondary inclusions occurs in intergranular fractures and is characterised by two types of aqueous inclusions. One type is a low salinity, H2O–NaCl fluid and the second consists of a high salinity, H2O–NaCl–CaCl2 fluid. These fluid inclusions are not related to the metamorphic process and have been trapped after D3 at relatively low P (hydrostatic)–T conditions (P<100 MPa and T<300 °C).

Both the early H2O–CH4–N2–NaCl fluids in quartz from the graphitic-rich lithologies and the later H2O–CO2–CH4–N2–NaCl carbonic fluid in quartz from graphitic-rich and nongraphitic-rich lithologies seem to have a common origin and evolution. They have low salinity, probably resulting from connate waters that were diluted by the water released from mineral dehydration during metamorphism. Their main component is water, but the early H2O–CH4–N2–NaCl fluids are enriched in CH4 due to interaction with the C-rich host rocks.

From the early H2O–CH4–N2–NaCl to the later aqueous–carbonic H2O–CO2–CH4–N2–NaCl fluids, there is an enrichment in CO2 that is more significant for the fluids associated with nongraphitic-rich lithologies.

The aqueous–carbonic fluids, enriched in H2O and CH4, are primarily associated with graphitic-rich lithologies. However, the aqueous–carbonic CO2-rich fluids were found in both graphitic and nongraphitic-rich units from both the CW and CE studied areas, which are of medium and low metamorphic grade, respectively.  相似文献   


3.
Larryn W. Diamond   《Lithos》2001,55(1-4):69-99
Aqueous solutions that contain volatile (gas) components are one of the most important types of fluid in the Earth's crust. The record that such fluids have left in the form of fluid inclusions in minerals provides a wealth of insight into the geochemical and petrologic processes in which the fluids participated. This article reviews the systematics of CO2–H2O fluid inclusions as a starting point for interpreting the chemically more complex systems. The phase relations of the binary are described with respect to a qualitative PTX model, and isoplethic–isochoric paths through this model are used to explain the equilibrium and non-equilibrium behaviour of fluid inclusions during microthermometric heating and cooling. The PTX framework is then used to discuss the various modes of fluid inclusion entrapment, and how the resulting assemblage textures can be used to interpret the PT conditions, phase states, and evolution paths of the parent solutions. Finally, quantitative methods are reviewed by which bulk molar volume and composition of CO2–H2O fluid inclusions can be determined from microthermometric observations of phase transitions.  相似文献   

4.
The basement of the North China Craton can be divided into the eastern, central and western zones, based on lithological, structural, metamorphic and geochronological data. The western zone comprises two different petrotectonic units: Archaean tonalitic–trondhjemitic–granodioritic (TTG) grey gneisses and metamorphic mafic rocks, and Palaeoproterozoic khondalite series. The former is characterized by isobaric cooling (IBC)-type anticlockwise PT paths in the north-northwestern part of the zone and near-isothermal decompression (ITD)-type clockwise PT paths in the eastern part, adjacent to the central zone. On the other hand, the tectonothermal evolution of Palaeoproterozoic khondalite series rocks is characterized exclusively by nearly isothermal decompression following the peak of metamorphism and then cooling, defining clockwise PT paths. The Archaean TTG gneisses and associated mafic rocks with anticlockwise metamorphic PT paths reflects an origin related to underplating and intrusion of mantle-derived magmas which may be derived from mantle plumes. They represent a late Archaean continental block in the western part of the North China Craton. The Palaeoproterozoic khondalite series rocks represent passive continental margin deposits. They were metamorphosed and deformed in the late Palaeoproterozoic during the amalgamation of the western continental block with another continental block in the east part of the North China Craton. The ITD-type clockwise PTt paths of the Palaeoproterozoic khondalite series rocks record the tectonothermal histories of the collision of the western and eastern continental blocks which resulted in the final assembly of the North China Craton at c. 1800 Ma.  相似文献   

5.
Chris D. Parkinson   《Lithos》2000,52(1-4):215-233
Coarse-grained whiteschist, containing the assemblage: garnet+kyanite+phengite+talc+quartz/coesite, is an abundant constituent of the ultrahigh-pressure metamorphic (UHPM) belt in the Kulet region of the Kokchetav massif of Kazakhstan.

Garnet displays prograde compositional zonation, with decreasing spessartine and increasing pyrope components, from core to rim. Cores were recrystallized at T=380°C (inner) to 580°C (outer) at P<10 kbar (garnet–ilmenite geothermometry, margarite+quartz stability), and mantles at T=720–760°C and PH20=34–36 kbar (coesite+graphite stability, phengite geobarometer, KFMASH system reaction equilibria). Textural evidence indicates that rims grew during decompression and cooling, within the Qtz-stability field.

Silica inclusions (quartz and/or coesite) of various textural types within garnets display a systematic zonal distribution. Cores contain abundant inclusions of euhedral quartz (type 1 inclusions). Inner mantle regions contain inclusions of polycrystalline quartz pseudomorphs after coesite (type 2), with minute dusty micro-inclusions of chlorite, and more rarely, talc and kyanite in their cores; intense radial and concentric fractures are well developed in the garnet. Intermediate mantle regions contain bimineralic inclusions with coesite cores and palisade quartz rims (type 3), which are also surrounded by radial fractures. Subhedral inclusions of pure coesite without quartz overgrowths or radial fractures (type 4) occur in the outer part of the mantle. Garnet rims are silica-inclusion-free.

Type 1 inclusions in garnet cores represent the low-P, low-T precursor stage to UHPM recrystallization, and attest to the persistence of low-P assemblages in the coesite-stability field. Coesites in inclusion types 2, 3, and 4 are interpreted to have sequentially crystallized by net transfer reaction (kyanite+talc=garnet+coesite+H2O), and were sequestered within the garnet with progressively decreasing amounts of intragranular aqueous fluid.

During the retrograde evolution of the rock, all three inclusion types diverged from the host garnet PT path at the coesite–quartz equilibrium, and followed a trajectory parallel to the equilibrium boundary resulting in inclusion overpressure. Coesite in type 2 inclusions suffered rapid intragranular H2O-catalysed transformation to quartz, and ruptured the host garnet at about 600°C (when inclusion P27 kbar, garnet host P9 kbar). Instantaneous decompression to the host garnet PT path, passed through the kyanite+talc=chlorite+quartz reaction equilibrium, resulting in the dusty micro-assemblage in inclusion cores. Type 3 inclusions suffered a lower volumetric proportion transformation to quartz at the coesite–quartz equilibrium, and finally underwent rupture and decompression when T<400°C, facilitating coesite preservation. Type 4 coesite inclusions are interpreted to have suffered minimal transformation to quartz and proceeded to surface temperature conditions along or near the coesite–quartz equilibrium boundary.  相似文献   


6.
Alexander Proyer 《Lithos》2003,70(3-4):183-194
Metagranites in the NKFMASH system require external hydration during prograde high-pressure metamorphism in order to equilibrate to ambient HP conditions by producing more siliceous muscovite. Any lack of external fluid or the disappearance of biotite stops re-equilibration and thus prevents recording of high-pressure conditions. The same hydration reactions cause dehydration during exhumation. Orthogneiss from shear zones or adjacent to metapelites and metabasites will take up external fluid during subduction and record the highest PT conditions, but will also be the first to dehydrate upon exhumation, now hydrating other lithologies and probably refuelling shearzones.

The (de)hydration behavior of Ca-bearing metagranitoids is similar to that in the Ca-free system. However, the anorthite component of plagioclase decomposes with increasing pressure to form either (clino)zoisite or a grossular-rich garnet. Both reactions are fluid-consuming. If H2O is supplied from an external source, the garnet-bearing assemblage can record PT conditions up to very high pressures, but dehydrates again during heating and/or decompression to form a more Fe-rich garnet and Al-rich mica(s). The garnet compositions observed in natural HP-metagranites are mostly too Fe-rich to be formed in the presence of an H2O-rich fluid.

N(C)KFMASH metapelites generally have a more complex mineralogy and succession of mineral assemblages along a PT path. The H2O contained in hydrous silicates like chlorite and chloritoid is only partly released, but partly transferred to other minerals like paragonite, glaucophane or phengite during subduction and further dehydration during exhumation is common. The mineral assemblage preserved by the rock may then record PT conditions way below those of the actual pressure and temperature peak of the path. Contouring of the PT pseudosection of a specific metapelite composition with mode isopleths for H2O shows which PT conditions along a given path are the ones most likely recorded by the rock.  相似文献   


7.
Five kinds of UHP metamorphic rocks, including eclogite, orthogneiss, paragneiss, schist and quartzite are exposed in the Qinglongshan roadcut, southern Sulu orogenic belt of eastern central China. They comprise metamorphic supracrustal rocks with bimodal volcanic characteristics and continental affinity, and granitic intrusive associations. The preservation of coesite inclusions and/or its pseudomorphs in eclogite and other rocks indicate that they have been subjected to in-situ UHP metamorphism. Four stages of metamorphism were recognized by combining petrographic observations and compositions of minerals from various UHP rocks. Prograde epidote-amphibolite facies, UHP coesite–eclogite facies, post UHP quartz–eclogite facies, and retrograde amphibolite facies assemblages delineate an inferred PT path with a clockwise trajectory and a retrograde event characterized by the coupling of decompression with a temperature decrease. Garnet porphyroblasts in UHP eclogites display a complex growth zoning and mineral distribution, and record a crucial segment of the prograde and retrograde metamorphic evolution. The preservation of growth zoning in eclogitic and gneissic garnets suggests that the UHP rocks had a short residence time before retrograde metamorphism and a very high uplift rate in order to preserve the prograde growth zoning.  相似文献   

8.
Zhang Zeming  Xu Zhiqin  Xu Huifen 《Lithos》2000,52(1-4):35-50
The 558-m-deep ZK703 drillhole located near Donghai in the southern part of the Sulu ultrahigh-pressure metamorphic belt, eastern China, penetrates alternating layers of eclogites, gneisses, jadeite quartzites, garnet peridotites, phengite–quartz schists, and kyanite quartzites. The preservation of ultrahigh-pressure metamorphic minerals and their relics, together with the contact relationship and protolith types of the various rocks indicates that these are metamorphic supracrustal rocks and mafic-ultramafic rock assemblages that have experienced in-situ ultrahigh-pressure metamorphism. The eclogites can be divided into five types based on accessory minerals: rutile eclogite, phengite eclogite, kyanite–phengite eclogite, quartz eclogite, and common eclogite with rare minor minerals. Rutile eclogite forms a thick layer in the drillhole that contains sufficient rutile for potential mining. Two retrograde assemblages are observed in the eclogites: the first stage is characterized by the formation of sodic plagioclase+amphibole symplectite or symplectitic coronas after omphacite and garnet, plagioclase+biotite after garnet or phengite, and plagioclase coronas after kyanite; the second stage involved total replacement of omphacite and garnet by amphibole+albite+epidote+quartz. Peak metamorphic PT conditions of the eclogites were around 32 to 40 kbar and 720°C to 880°C. The retrograde PT path of the eclogites is characterized by rapidly decreasing pressure with slightly decreasing temperature. Micro-textures and compositional variations in symplectitic minerals suggest that the decompression breakdown of ultrahigh-pressure minerals is a domainal equilibrium reaction or disequilibrium reaction. The composition of the original minerals and the diffusion rate of elements involved in these reactions controlled the symplectitic mineral compositions.  相似文献   

9.
Santanu Kumar Bhowmik   《Lithos》2006,92(3-4):484-505
In the present study from the southern margin of the Central Indian Tectonic Zone, it is demonstrated how the metamorphic PT path of ultrahigh-temperature granulite terranes can be reconstructed using the metamorphic transition in corundum granulites from early biotite melting to later FMAS solid–solid reaction. The extreme metamorphism in these rocks caused two-stage biotite melting, resulting in initial porphyroblastic garnet1 and later sapphirine–spinel1 incongruent solid mineral assemblages. During this process, the leucocratic and melanocratic layers in the corundum granulites evolved from an initial silica-oversaturated to a later silica-undersaturated domain. In the melanocratic layer, this allowed localized concentration of sapphirine-spinel1 and residual sillimanite1, producing an extremely restitic assemblage, at the culmination of peak metamorphism, BM1. BM1 is constrained at  1000 °C at relatively deep crustal levels (P  9 kbar) from the stability of ferroaugite in a co-metamorphosed Iron Formation granulite. During subsequent metamorphism (BM2), the reaction path and history in the corundum granulites shifted to the restitic domain allowing reacting sapphirine, spinel1 and sillimanite to produce coronal garnet2–corundum assemblage via a FMAS univariant reaction. In the final stages of reaction history, biotite2–sillimanite2–spinel2 assemblage was produced after garnet2–corundum due to localized melt–crystal interaction. The metamorphic sequence, when interpreted with the help of a newly constructed, qualitative KFMASH petrogenetic grid, reveals successive stages of heating, increasing pressure and cooling around the KFMASH invariant point, [Opx,Crd], which is consistent with a counterclockwise metamorphic PT path. The near isobaric nature of post-peak cooling (ΔT  250–300 °C) is also evident from multistage pyroxene exsolution and by the appearance of lamellar and coronal garnets in the Iron Formation granulites. This study provides the first tight constraint for ultrahigh-T metamorphism along a counter clockwise PT trajectory in the Central Indian Tectonic zone, and has important bearing for terrane correlations in this part of East Gondwanaland. In addition, the new KFMASH grid allows evaluation of metamorphic phase relations in ultrahigh-T, corundum-bearing and corundum-absent aluminous granulites.  相似文献   

10.
Fulai Liu  Zhiqin Xu  Huaimin Xue 《Lithos》2004,78(4):411-429
Orthogneisses are the major country rocks hosting eclogites in the Sulu UHP terrane, eastern China. All of the analyzed orthogneiss cores from the main drilling hole of the Chinese Continental Scientific Drilling Project (CCSD-MH) have similar major and trace element compositions and a granite protolith. These rocks have relatively high LREE/HREE ratios, strong negative Eu anomalies (Eu/Eu*=0.20–0.39), and negative Ba anomalies (Ba/Ba*=0.25–0.64). Coesite and coesite-bearing UHP mineral assemblages are common inclusions in zircons separated from orthogneiss, paragneiss, amphibolite, and (retrograded) eclogite of the CCSD-MH. This suggests that the eclogite, together with its country rocks, experienced in situ ultrahigh-pressure (UHP) metamorphism. Laser Raman spectroscopy and cathodoluminescence (CL) images show that zircons from the orthogneisses are zoned and that they have distinct mineral inclusions in the different zones. Most zircons retain early magmatic cores with abundant low-pressure mineral inclusions, which are mantled with metamorphic zircon-containing inclusions of coesite and other UHP minerals. The outermost rims on these grains contain low-pressure mineral inclusions, such as quartz and albite. SHRIMP U–Pb dating of the zoned zircons gives three discrete and meaningful groups of ages: Proterozoic ages for the protolith, 227±2 Ma for the coesite-bearing mantles, and 209±3 Ma for the amphibolite facies retrograde rims. The widespread occurrence of UHP mineral inclusions in zircons from the Sulu metamorphic belt dated at about 227 Ma suggests that voluminous continental crust experienced late Triassic subduction to depths of at least 120 km and perhaps more than 200 km. Eighteen million years later, the terrane was rapidly exhumed to midcrustal levels, and the UHP rocks were overprinted by amphibolite facies metamorphism. The exhumation rate deduced from the zircon age data and previously obtained metamorphic PT data is estimated to be 5.6–11.0 km/Ma. Such rapid exhumation of the Sulu UHP terrane may be due to the buoyancy forces produced by subduction of low-density continental material into the deep mantle.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号