首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 984 毫秒
1.
Pressure estimates for amphibolite-facies metamorphism at Plutonic Gold Mine (Plutonic), Marymia Inlier, Western Australia, were recently revised significantly upwards from ~4 ± 2 kbar/550–600°C to ≥8 kbar/~600°C, based on the calculated stability fields for mineral assemblages in garnet-free mafic rocks. These conditions are anomalous in the context of the Yilgarn Craton. Here, we present new mineral equilibria calculations for rare garnet-bearing rock types from Plutonic that confirm those higher pressure estimates, and provide confidence that the determinations of metamorphic conditions based only on results from metamorphosed mafic rocks are robust and reliable. Taken together, the new estimates (7.3–8.2 kbar/580–590°C) from the garnet-bearing rocks, and the existing results from the mafic rocks, provide evidence that, most probably during the late Archean, rocks now exposed along the northern margin of the Yilgarn Craton underwent substantial increases in pressure, which was likely followed by rapid exhumation.  相似文献   

2.
Evaluating pressure–temperature (PT) conditions through mineral equilibria modelling within an amphibolite facies polymetamorphic terrane requires knowledge of the fluid content of the rocks. The Archean‐Palaeoproterozoic basement rocks of the Ruker Province, East Antarctica, preserve evidence of three metamorphic events (M1–M3). Of particular interest is the M3 event, which is constrained to the early Palaeozoic (c. 550–480 Ma). Evaluation of the tectonic setting during this time is important because the Ruker Province is located within a critical region with respect to models of Gondwana assembly. Structural evidence of the early Palaeozoic event is preserved as large (up to ~500 m wide) high strain zones that cut the orthogneiss‐metasedimentary basement (Tingey Complex) of the Ruker Province. Rocks within these zones have been thoroughly recrystallized and preserve a dominant shear fabric and M3 mineral assemblages that formed at PT conditions of 4.0–5.2 kbar and 565–640 °C. Distal to these zones, rocks preserve more complex petrographic relationships with S1 and S2 foliations, being incompletely overgrown by M3 retrograde assemblages. We show that the mineral assemblages preserved during the M3 event are highly dependent on the availability of fluid H2O, which is strongly influenced by the structural setting (i.e. proximity to the high‐strain zones). PT structural and fluid flow constraints support a model of basin inversion during early Palaeozoic crustal rejuvenation in the Ruker Province.  相似文献   

3.
Mineral assemblages in Al2O3‐rich, SiO2‐ and K2O‐poor metapelitic rocks from the western Odenwald Crystalline Complex (Variscan Mid‐German Crystalline Rise, southern Germany) include corundum, spinel, cordierite, sillimanite, garnet and staurolite. Quartz is absent from almost all samples. Therefore, the applicability of conventional geothermobarometry is very limited or even impossible. Detailed petrographic investigation on selected samples permits inference of the sequence of appearance and disappearance of several mineral assemblages. The recognition of such partial re‐equilibration stages and their associated mineral assemblages, together with mineral stabilities predicted from KFMASH pseudosections, enables the determination of the pressure‐temperature (P–T) trajectories experienced by these rocks during the Variscan metamorphism. The rocks were metamorphosed under low‐P/high‐T conditions and underwent an anti‐clockwise P–T evolution. A pressure increase from about 2 kbar to 4 ± 0.5 kbar was accompanied by heating. Peak metamorphic conditions were reached at pressures of 4 ± 0.5 kbar and temperatures of at least 640 °C, probably even higher. The retrograde evolution is characterised by near‐isobaric cooling from ≥ 640 °C to approximately 550 °C. The rocks underwent the anti‐clockwise evolution in a subduction‐related magmatic arc setting. The close spatial association of the low‐P/high‐T rocks with recently discovered metabasic eclogites in the eastern part of the Odenwald Crystalline Complex may indicate a fossil paired metamorphic belt in the Central European Variscides.  相似文献   

4.
Generally, PT pseudosections for reduced compositional systems, such as K2O–FeO–MgO–Al2O3–SiO2–H2O, Na2O–K2O–FeO–MgO–Al2O3–SiO2–H2O and MnO–K2O–FeO–MgO–Al2O3–SiO2–H2O, are well suited for inferring detailed PT paths, comparing mineral assemblages observed in natural rocks with those calculated. Examples are provided by PT paths inferred for four metapelitic samples from a 1 m2 wide outcrop of the Herbert Mountains in the Shackleton Range, Antarctica. The method works well if the bulk composition used is reconstituted from average mineral modes and mineral compositions (AMC) or when X‐ray fluorescence (XRF) data are corrected for Al2O3 and FeO. A plagioclase correction is suitable for Al2O3. Correction for FeO is dependent on additional microscopic observations, e.g. the kind and amount of opaque minerals. In some cases, all iron can be treated as FeOtot, whereas in others a magnetite or hematite correction yields much better results. Comparison between calculated and observed mineral modes and mineral compositions shows that the AMC bulk composition is best suited to the interpretation of rock textures using PT pseudosections, whereas corrected XRF data yield good results only when the investigated sample has few opaque minerals. The results indicate that metapelitic rocks from the Herbert Mountains of the Northern Shackleton Range underwent a prograde PT evolution from about 600 °C/5.5 kbar to 660 °C/7 kbar, followed by nearly adiabatic cooling to about 600 °C at 4.5 kbar.  相似文献   

5.
Mineralogical and mineral chemical evidence for prograde metamorphism is rarely preserved in rocks that have reached ultrahigh‐temperature (UHT) conditions (>900 °C) because high diffusion and reaction rates erase evidence for earlier assemblages. The UHT, high‐pressure (HP) metasedimentary rocks of the Leverburgh belt of South Harris, Scotland, are unusual in that evidence for the prograde history is preserved, despite having reached temperatures of ~955 °C or more. Two lithologies from the belt are investigated here and quantitatively modelled in the system NaO–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O: a garnet‐kyanite‐K‐feldspar‐quartz gneiss (XMg = 37, A/AFM = 0.41), and an orthopyroxene‐garnet‐kyanite‐K‐feldspar quartzite (XMg = 89 A/AFM = 0.68). The garnet‐kyanite gneiss contains garnet porphyroblasts that grew on the prograde path, and captured inclusion assemblages of biotite, sillimanite, plagioclase and quartz (<790 °C, <9.5 kbar). These porphyroblasts preserve spectacular calcium zonation features with an early growth pattern overgrown by high‐Ca rims formed during high‐P metamorphism in the kyanite stability field. In contrast, Fe‐Mg zonation in the same garnet porphyroblasts reflects retrograde re‐equilibration, as a result of the relatively faster diffusivity of these ions. Peak PT are constrained by the occurrence of coexisting orthopyroxene and aluminosilicate in the quartzite. Orthopyroxene porphyroblasts [y(opx) = 0.17–0.22] contain sillimanite inclusions, indicative of maximum conditions of 955 ± 45 °C at 10.0 ± 1.5 kbar. Subsequently, orthopyroxene, kyanite, K‐feldspar and quartz developed in equilibrated textures, constraining the maximum pressure conditions to 12.5 ± 0.8 kbar at 905 ± 25 °C. P–T–X modelling reveals that the mineral assemblage orthopyroxene‐kyanite‐quartz is compositionally restricted to rocks of XMg > 84, consistent with its very rare occurrence in nature. The preservation of unusual high P–T mineral assemblages and chemical disequilibrium features in these UHT HP rocks is attributed to a rapid tectonometamorphic cycle involving arc subduction and terminating in exhumation.  相似文献   

6.
Kyanite‐bearing paragneisses from the Manicouagan Imbricate Zone and its footwall (high‐P belt of the central Grenville Province) preserve evidence of partial melting with development of metamorphic textures involving biotite–garnet ± kyanite ± plagioclase ± K‐feldspar–quartz. Garnet in these rocks displays a variety of zoning patterns with respect to Ca. Pseudosection modelling in the Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–O (NCKFMASHTO) system using measured bulk rock compositions accounts for the textural evolution of two aluminous and two sub‐aluminous samples from the presumed thermal peak to conditions at which retained melt solidified. The prograde features are best explained by pseudosections calculated with compositions to account for melt loss. The intersection of isopleths of grossular content and Fe/(Fe + Mg) relating to large porphyroblasts of garnet provide constraints on the PT conditions of the metamorphic peak. These PT estimates are considered to be minima because of the potential for diffusional modification of the composition of garnet at high‐T and during the early stages of cooling. However, they are consistent with textural observations and pseudosection topology, with peak assemblages best preserved in rocks for which the calculated pseudosections predict only small changes in mineral proportions in the PT interval, in which retrograde reactions are inferred to have occurred between the thermal peak and the solidus. Maximum PT conditions (14.5–15.5 kbar and 840–890 °C) and steep retrograde PT paths inferred for rocks from the Manicouagan Imbricate Zone are comparable with those determined for mafic rocks from the same area. In contrast, maximum PT conditions of 12.5–13 kbar and 815–830 °C and flatter PT paths are inferred for the rocks of the footwall to the Manicouagan Imbricate Zone. The general consistency between textures, mineral compositions and the topologies of the calculated pseudosections suggests that the pseudosection approach is an appropriate tool for inferring the PT evolution of high‐P anatectic quartzo‐feldspathic rocks.  相似文献   

7.
In the Orlica–?nie?nik Dome (NE Bohemian massif), alternating belts of orthogneiss with high‐pressure rocks and belts of mid‐crustal metasedimentary–metavolcanic rocks commonly display a dominant subvertical fabric deformed into a subhorizontal foliation. The first macroscopic foliation is subvertical, strikes NE–SW and is heterogeneously folded by open to isoclinal folds with subhorizontal axial planes parallel to the heterogeneously developed flat‐lying foliation. The metamorphic evolution of the mid‐crustal metasedimentary rocks involved successive crystallization of chlorite–muscovite–ilmenite–plagioclase–garnet, followed by staurolite‐bearing and then kyanite‐bearing assemblages in the subvertical fabric. This was followed by garnet retrogression, with syntectonic crystallization of sillimanite and andalusite parallel to the shallow‐dipping foliation. Elsewhere, andalusite and cordierite statically overgrew the flat‐lying fabric. With reference to a P–T pseudosection for a representative sample, the prograde succession of mineral assemblages and the garnet zoning pattern with decreasing grossular, spessartine and XFe are compatible with a PT path from 3.5–5 kbar/490–520 °C to peak conditions of 6–7 kbar/~630 °C suggesting burial from 12 to 25 km with increasing temperature. Using the same pseudosection, the retrograde succession of minerals shows decompression to sillimanite stability at ~4 kbar/~630 °C and to andalusite–cordierite stability at 2–3 kbar indicating exhumation from 25 km to around 9–12 km. Subsequent exhumation to ~6 km occurred without apparent formation of a deformation fabric. The structure and petrology together with the spatial distribution of the metasedimentary–metavolcanic rocks, and gneissic and high‐pressure belts are compatible with a model of burial of limited parts of the upper and middle crust in narrow cusp‐like synclines, synchronous with the exhumation of orogenic lower crust represented by the gneissic and high‐pressure rocks in lobe‐shaped and volumetrically more important anticlines. Converging PTD paths for the metasedimentary rocks and the adjacent high‐pressure rocks are due to vertical exchanges between cold and hot vertically moving masses. Finally, the retrograde shallow‐dipping fabric affects both the metasedimentary–metavolcanic rocks and the gneissic and high‐pressure rocks, and indicates that the ~15‐km exhumation was mostly accommodated by heterogeneous ductile thinning associated with unroofing of a buoyant crustal root.  相似文献   

8.
Metapelites, migmatites and granites from the c. 2 Ga Mahalapye Complex have been studied for determining the PT–fluid influence on mineral assemblages and local equilibrium compositions in the rocks from the extreme southwestern part of the Central Zone of the Limpopo high‐grade terrane in Botswana. It was found that fluid infiltration played a leading role in the formation of the rocks. This conclusion is based on both well‐developed textures inferred to record metasomatic reactions, such as Bt ? And + Qtz + (K2O) and Bt ± Qtz ? Sil + Kfs + Ms ± Pl, and zonation of Ms | Bt + Qtz | And + Qtz and Grt | Crd | Pl | Kfs + Qtz reflecting a perfect mobility (Korzhinskii terminology) of some chemical components. The conclusion is also supported by the results of a fluid inclusion study. CO2 and H2O ( = 0.6) are the major components of the fluid. The fluid has been trapped synchronously along the retrograde PT path. The PT path was derived using mineral thermobarometry and a combination of mineral thermometry and fluid inclusion density data. The Mahalapye Complex experienced low‐pressure granulite facies metamorphism with a retrograde evolution from 770 °C and 5.5 kbar to 560 °C and 2 kbar, presumably at c. 2 Ga.  相似文献   

9.
Oman blueschists and eclogites lie below the obduction nappe of the Semail ophiolite in one of the key areas on Earth for the study of plate convergence. Here new metamorphic and tectonic constraints are provided for the central, yet poorly constrained Hulw unit, sandwiched between the low‐grade units (~10 kbar, <300 °C) and the As Sifah eclogites (Pmax ~ 23 kbar; Tmax ~ 600 °C). TWEEQU multi‐equilibrium thermobarometry, using both compositional mapping and spot analyses, and Raman spectroscopy of carbonaceous material yield a high‐precision P–T path for the Hulw and As Sheikh units and reveal that they shared a common P–T history in four stages: (i) a pressure decrease from 10–12 kbar, 250–300 °C to 7–9 kbar, 300–350 °C; (ii) almost isobaric heating at ~8–10 kbar from 300–350 °C to 450–500 °C; (iii) a pressure decrease at moderate temperatures (~450–500 °C); and (iv) isobaric cooling at ~5–6 kbar from 450–500 to 300 °C. No significant pressure or temperature gap is observed across the upper plate–lower plate discontinuity to the north and west of the Hulw unit. The combination of tectonic and P–T data constrains the stacking chronology of the three main metamorphic units comprising the Saih Hatat window (i.e. the Ruwi‐Quryat, the Hulw‐As Sheikh and the Diqdah‐As Sifah units). These results strengthen the view that the tectonic and metamorphic data are conveniently accounted for by a simple, N‐vergent continental subduction of the passive Arabian margin below the obduction nappe along a cold P–T gradient.  相似文献   

10.
Petrographic analysis of peraluminous metapelites from two separate regions of the Karakoram metamorphic complex, North Pakistan, has produced new insights into the P–T–t evolution of the deep crust along the south Asian margin before and after the India‐Asia collision. Average P–T estimates and pseudosection construction in the MnO–Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–Fe2O3 (MnNCKFMASHTO) system using THERMOCALC have provided prograde and peak metamorphic conditions and U–Pb geochronology of metamorphic monazite has provided age constraints. Two new events in the tectonothermal evolution of the Hunza Valley have been documented; an andalusite‐grade contact metamorphic event at 105.5 ± 0.8 Ma, at unknown P–T conditions, associated with the widespread subduction‐related granite magmatism before the India‐Asia collision, and a kyanite‐grade overprint of sillimanite‐grade rocks with peak P–T conditions of ~7.8 kbar, 645 °C at 28.2 ± 0.8 Ma associated with the ongoing India‐Asia collision. A kyanite‐grade event observed in the Baltoro region with similar peak P–T conditions (~7.4–8.0 kbar, ~640–660 °C) is interpreted to have occurred sometime after 21.8 ± 0.6 Ma, however, previous studies have suggested that this event commenced in the Baltoro as early as c. 28 Ma. A calculated prograde P–T path for this kyanite‐grade event in the Baltoro indicates that garnet first nucleated on an initially high geothermal gradient (~30 °C km?1) and grew during a significant increase in pressure of ~2.6 kbar over a temperature increase of ~100 °C. This event is thought to represent evidence for conductive heating of the middle crust during early stages of intrusion and lateral migration of the Baltoro batholith, with thermal conditions comparable with tectonic models of magmatic over‐accretion.  相似文献   

11.
Ultra‐high‐temperature (UHT) metamorphism occurs when the continental crust is subjected to temperatures of greater than 900 °C at depths of 20–40 km. UHT metamorphism provides evidence that major tectonic processes may operate under thermal conditions more extreme than those generally produced in numerical models of orogenesis. Evidence for UHT metamorphism is recorded in mineral assemblages formed in magnesian pelites, supported by high‐temperature indicators including mesoperthitic feldspar, aluminous orthopyroxene and high Zr contents in rutile. Recent theoretical, experimental and thermodynamic data set constraints on metamorphic phase equilibria in FMAS, KFMASH and more complex chemical systems have greatly improved quantification of the P–T conditions and paths of UHT metamorphic belts. However, despite these advances key issues that remain to be addressed include improving experimental constraints on the thermodynamic properties of sapphirine, quantifying the effects of oxidation state on sapphirine, orthopyroxene and spinel stabilities and quantifying the effects of H2O–CO2 in cordierite on phase equilibria and reaction texture analysis. These areas of uncertainty mean that UHT mineral assemblages must still be examined using theoretical and semi‐quantitative approaches, such as P(–T)–μ sections, and conventional thermobarometry in concert with calculated phase equilibrium methods. In the cases of UHT terranes that preserve microtextural and mineral assemblage evidence for steep or ‘near‐isothermal’ decompression P–T paths, the presence of H2O and CO2 in cordierite is critical to estimates of the P–T path slopes, the pressures at which reaction textures have formed and the impact of fluid infiltration. Many UHT terranes have evolved from peak P–T conditions of 8–11 kbar and 900–1030 °C to lower pressure conditions of 8 to 6 kbar whilst still at temperature in the range of 950 to 800 °C. These decompressional P–T paths, with characteristic dP/dT gradients of ~25 ± 10 bar °C?1, are similar in broad shape to those generated in deep‐crustal channel flow models for the later stages of orogenic collapse, but lie at significantly higher temperatures for any specified pressure. This thermal gap presents a key challenge in the tectonic modelling of UHT metamorphism, with implications for the evolution of the crust, sub‐crustal lithosphere and asthenospheric mantle during the development of hot orogens.  相似文献   

12.
Interpretations based on quantitative phase diagrams in the system CaO–Na2O–K2O–TiO2–MnO–FeO–MgO–Al2O3–SiO2–H2O indicate that mineral assemblages, zonations and microstructures observed in migmatitic rocks from the Beit Bridge Complex (Messina area, Limpopo Belt) formed along a clockwise P–T path. That path displays a prograde P–T increase from 600 °C/7.0 kbar to 780 °C/9–10 kbar (pressure peak) and 820 °C/8 kbar (thermal peak), followed by a P–T decrease to 600 °C/4 kbar. The data used to construct the P–T path were derived from three samples of migmatitic gneiss from a restricted area, each of which has a distinct bulk composition: (1) a K, Al‐rich garnet–biotite–cordierite–sillimanite–K‐feldspar–plagioclase–quartz–graphite gneiss (2) a K‐poor, Al‐rich garnet–biotite–staurolite–cordierite–kyanite–sillimanite–plagioclase–quartz–rutile gneiss, and (3) a K, Al‐poor, Fe‐rich garnet–orthopyroxene–biotite–chlorite–plagioclase–quartz–rutile–ilmenite gneiss. Preservation of continuous prograde garnet growth zonation demonstrates that the pro‐ and retrograde P–T evolution of the gneisses must have been rapid, occurring during a single orogenic cycle. These petrological findings in combination with existing geochronological and structural data show that granulite facies metamorphism of the Beit Bridge metasedimentary rocks resulted from an orogenic event during the Palaeoproterozoic (c. 2.0 Ga), caused by oblique collision between the Kaapvaal and Zimbabwe Cratons. Abbreviations follow Kretz (1983 ).  相似文献   

13.
Granulite facies magnesian metapelites commonly preserve a wide array of mineral assemblages and reaction textures that are useful for deciphering the metamorphic evolution of a terrane. Quantitative pressure, temperature and bulk composition constraints on the development and preservation of characteristic peak granulite facies mineral assemblages such as orthopyroxene + sillimanite + quartz are assessed with reference to calculated phase diagrams. In NCKFMASH and its chemical subsystems, peak assemblages form mainly in high‐variance fields, and most mineral assemblage changes reflect multivariant equilibria. The rarity of orthopyroxene–sillimanite–quartz‐bearing assemblages in granulite facies rocks reflects the need for bulk rock XMg of greater than approximately 0.60–0.65, with pressures and temperatures exceeding c. 8 kbar and 850 °C, respectively. Cordierite coronas mantling peak minerals such as orthopyroxene, sillimanite and quartz have historically been used to infer isothermal decompression P–T paths in ultrahigh‐temperature granulite facies terranes. However, a potentially wide range of P–T paths from a given peak metamorphic condition facilitate retrograde cordierite growth after orthopyroxene + sillimanite + quartz, indicating that an individual mineral reaction texture is unable to uniquely define a P–T vector. Therefore, the interpretation of P–T paths in high‐grade rocks as isothermal decompression or isobaric cooling may be overly simplistic. Integration of quantitative data from different mineral reaction textures in rocks with varying bulk composition will provide the strongest constraints on a P–T path, and in turn on tectonic models derived from these paths.  相似文献   

14.
A petrogenetic grid in the model system CaO–FeO–MgO–Al2O3–SiO2–H2O is presented, illustrating the phase relationships among the minerals grunerite, hornblende, garnet, clinopyroxene, chlorite, olivine, anorthite, zoisite and aluminosilicates, with quartz and H2O in excess. The grid was calculated with the computer software thermocalc , using an upgraded version of the internally consistent thermodynamic dataset HP98 and non‐ideal mixing activity models for all solid solutions. From this grid, quantitative phase diagrams (PT pseudosections) are derived and employed to infer a PT path for grunerite–garnet‐bearing amphibolites from the Endora Klippe, part of the Venetia Klippen Complex within the Central Zone of the Limpopo Belt. Agreement between calculated and observed mineral assemblages and garnet zonation indicates that this part of the Central Zone underwent a prograde temperature and pressure increase from c. 540 °C/4.5 kbar to 650 °C/6.5 kbar, followed by a post‐peak metamorphic pressure decrease. The inferred PT path supports a geotectonic model suggesting that the area surrounding the Venetia kimberlite pipes represents the amphibolite‐facies roof zone of migmatitic gneisses and granulites that occur widely within the Central Zone. In addition, the PT path conforms to an interpretation that the Proterozoic evolution of the Central Zone was controlled by horizontal tectonics, causing stacking and differential heating at c. 2.0 Ga.  相似文献   

15.
The assemblage garnet–chloritoid–kyanite is shown to be quite common in high‐pressure eclogite facies metapelites from orogenic belts around the world, and occurs over a narrowly restricted range of temperature ~550–600 °C, between 20 and 25 kbar. This assemblage is favoured particularly by large Al2O3:K2O ratios allowing the development of kyanite in addition to garnet and chloritoid. Additionally, ferric iron and manganese also help stabilize chloritoid in this assemblage. Pseudosections for several bulk compositions illustrate these high‐pressure assemblages, and a new thermodynamic model for white mica to include calcium and ferric iron was required to complete the calculations. It is extraordinary that so many orogenic eclogite facies rocks, both mafic eclogites sensu stricto as well as metapelites with the above assemblage, all yield temperatures within the range of 520–600 °C and peak pressures ~23±3 kbar. Subduction of oceanic crust and its entrained associated sedimentary material must involve the top of the slab, where mafic and pelitic rocks may easily coexist, passing through these PT conditions, such that rocks, if they proceed to further depths, are generally not returned to the surface. This, together with the tightly constrained range in peak temperatures which such eclogites experience, suggests thermal weakening being a major control on the depths at which crustal material is decoupled from the downgoing slab.  相似文献   

16.
Chloritoid–glaucophane‐bearing rocks are widespread in the high‐pressure belt of the north Qilian orogen, NW China. They are interbedded and cofacial with felsic schists originated from greywackes, mafic garnet blueschists and low‐T eclogites. Two representative chloritoid–glaucophane‐bearing assemblages are chloritoid + glaucophane + garnet + talc + quartz (sample Q5‐49) and chloritoid + glaucophane + garnet + phengite + epidote + quartz (sample Q5‐12). Garnet in sample Q5‐49 is coarse‐, medium‐ and fine‐grained and shows two types of zonation patterns. In pattern I, Xgrs is constant as Xpy rises, and in pattern II Xgrs decreases as Xpy rises. Phase equilibrium modelling in the NC(K)MnFMASH system with Thermocalc 3.25 indicates that pattern I can be formed during progressive metamorphism in lawsonite‐stable assemblages, while pattern II zonation can be formed with further heating after lawsonite has been consumed. Garnet growth in Q5‐49 is consistent with a continuous progressive metamorphic process from ~14.5 kbar at 470 °C to ~22.5 kbar at 560 °C. Garnet in sample Q5‐12 develops with pattern I zonation, which is consistent with a progressive metamorphic process from ~21 kbar at 540 °C to ~23.5 kbar at 580 °C with lawsonite present in the whole garnet growth. The latter sample shows the highest PT conditions of the reported chloritoid–glaucophane‐bearing assemblages. Phase equilibrium calculation in the NCKFMASH system with a recent mixing model of amphibole indicates that chloritoid + glaucophane paragenesis does not have a low‐pressure limit of 18–19 kbar as previously suggested, but has a much larger pressure range from 7–8 to 27–30 kbar, with the low‐pressure part being within the stability field of albite.  相似文献   

17.
The Malpica–Tui Unit (Galicia, NW Spain) records eclogite‐ and blueschist‐facies metamorphism during the onset of the Variscan orogeny in Europe. Petrological analysis involving pseudosections calculated using thermocalc shows that the Upper Sheet of this unit, the Ceán Schists, recorded a three‐stage metamorphic evolution involving (i) Early subduction‐related medium‐pressure/low‐temperature metamorphism (M1) constrained at ~350–380 °C, 12–14 kbar, which is only recorded in the basal part (lower metapelites, LM) of the Ceán Schists. (ii) Subduction‐related blueschist facies prograde metamorphism (M2) going from ~19 kbar, 420 °C to 21 kbar, 460 °C in the LM, and from 16 kbar 430 °C to 21–22 kbar, 520 °C in the structurally upper metapelites (UM). (iii) Exhumation‐related metamorphism (M3) is characterized by a decompression to 8–10 kbar, 470–490 °C in the LM. This decompression is also recorded in the UM, but it was not possible to estimate precise P–T conditions. The calculations indicate that (i) the prograde evolution in subduction zones may occur in fluid‐undersaturated conditions due to the crystallization of lawsonite, even in metapelitic rocks. This significantly influences phase equilibria and hence the P–T estimates. (ii) The proportion of ferric iron also has a strong influence on phase equilibria, even in metapelites. However, the analysed values of Fe2O3 may not reflect the oxidation state during the main metamorphic evolution and are probably easily modified by superficial alteration even in apparently fresh samples. The use of PTX(Fe2O3) pseudosections together with petrographic observations is then necessary to estimate the real oxidation state of the rocks and correctly evaluate the P–T conditions.  相似文献   

18.
Reconstructing late Palaeozoic metamorphism of the Central Asian Orogenic Belt (CAOB) can provide a better understanding of how the CAOB formed. The petrology of sillimanite-bearing metapelitic schists from high-grade portions of the Permian Chinese Altai metamorphic belt (andalusite-type) reflects the effects of poorly understood high-T, low-P metamorphism. Phase equilibria modelling in the Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–TiO2–O (NCKFMASHTO) system restricts PT conditions of the sillimanite schists to approximately 635–670°C at approximately 5.8–6.8 kbar. SHRIMP U–Pb analyses of zircon from the rocks yield a concordant age of 299.2 ± 3.4 Ma. Combined with the slightly younger (292.8 ± 2.3 Ma) areally restricted pelitic granulite with peak P?T conditions of approximately 780–800°C at approximately 5–6 kbar and high-T granulite with P?T conditions of approximately 860°C at approximately 6 kbar, these metamorphic rocks reflect prograde heating at relatively low pressure in early Permian time. Together with contemporary and widespread magmatic activities, they are best explained in the context of a post-orogenic extensional environment related to a mantle plume.  相似文献   

19.
The East Hebei terrane of North China Craton is characterized by the dome-and-keel structure, a common feature in most Archean cratons, where supracrustal rocks of granulite facies commonly occur as enclaves or rafts in tonalite–trondhjemite–granodiorite (TTG) gneisses. The metamorphic P–T paths of the granulites are significant for addressing the Archean tectonic regimes. Two types of granulite facies paragneiss with pelitic and greywacke compositions from the western margin of Qian'an gneiss dome are documented for their petrography, mineral chemistry, phase equilibria modelling using thermocalc, and zircon dating. Anticlockwise P–T paths involving the pre-peak pressure increase to the ultra-high temperature peak conditions and post-peak cooling and decompression processes were recognized. The pre-peak pressure increase process was constrained for a pelitic granulite mainly based on the spinel and cordierite inclusions in garnet and rutile corona around ilmenite, where the transition from spinel to garnet is modelled at 6–7 kbar at a fixed T = 1,000°C. For greywacke granulite, the pre-peak pressure increase evolution can be ascertained from the textural relation that orthopyroxene is surrounded by garnet, and the outwards increasing grossular (from 0.03 to 0.05) in the core of the atoll-like garnet (Grt-A), to occur from ~7 kbar at ~1,000°C. The peak P–T conditions for pelitic granulite are roughly limited to 7–11 kbar/890–1,050°C on the basis of the stability of the inferred peak assemblage involving garnet, perthite, sillimanite, rutile/ilmenite, and quartz. The peak P–T condition for greywacke granulite can be well constrained as 9–10 kbar/>1,000°C on the basis of the maximum grossular content (XGrs = 0.045–0.050) in the core of subhedral garnet (Grt-B) and the mantle of Grt-A together with an average re-integrated anorthite content (XAn = 0.07) in K-feldspar. The peak temperature condition is consistent with the ternary feldspar thermometer results mostly of 950–1,020°C for antiperthite and perthite in greywacke granulite, and in accordance with the development of oriented needle-like exsolution of Ti±Fe oxides in garnet from pelitic granulite. The post-peak cooling and decompression process was consistent with the decreasing XGrs in the mantle of Grt-A and core of Grt-B in greywacke sample, and the final-stage cooling conditions can be well constrained from the stability of final assemblages marked by the later growth of biotite, as 8–9 kbar/820–880°C for pelitic granulite and 6–9 kbar/840–890°C for greywacke granulite. Zircon dating yields provenance ages from 3.34 to 2.57 Ga and metamorphic ages of c. 2.50 Ga for the two types of granulite. The metamorphic ages overlap the final pulse of the Neoarchean magmatic activity of TTGs that ranges from c. 2.56 to c. 2.48 Ga with a peak at c. 2.52 Ga. Combining the development of dome-and-keel structures, the penecontemporaneity between the metamorphism of supracrustal rocks and TTG magmatic activity, and also the unique anticlockwise P–T paths, we prefer a vertical sagduction regime to interpret the tectonic evolution of the East Hebei terrane, which may be also significant for other Archean cratons.  相似文献   

20.
A sequence of mineral associations was examined in eclogitized basites of the Krasnaya Guba dike field in the Belomorian Mobile Belt. Two morphological types of eclogite and eclogite-like rocks were recognized: (1) eclogite rocks that developed after ferrogabbro dikes and completely replaced these dikes from contact to contact and (2) eclogite-like rocks that developed after gabbronorites in zones of ductile deformations and shearing. According to data mineral geothermobaromety, both rock types were formed within temperature and pressure ranges corresponding to high-pressure and high-temperature amphibolite facies at T = 700 ± 40°C and P = 10.0 ± 0.5 kbar. The peak metamorphic parameters of the host gneisses are analogous. The decompressional stage, which is unambiguously identified by reaction textures, occurred at 630–660°C and 7.9–8.2 kbar. As the temperature and, first of all, pressure decreased, the SiO2 activity in the fluid systematically varied. The eclogitization of the basites took place locally in relation to fluid fluxes, which were restricted to zones of intense deformations, at variable SiO2 activity. The rocks show evidence of two stages of post-eclogite amphibolization. Older amphibolization 1 was coeval with the late prograde metamorphic stage (T = 650°C, P = 10–11 kbar). Younger amphibolization 2 affected eclogitized basite dikes and unaltered gabbronorites (together with their host gneisses) over large areas. This process coincided with decompression (T = 580°C, P = 7–8 kbar) and was likely accompanied by the exhumation of deep zones of BMB to upper-middle crustal levels.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号