首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 406 毫秒
1.
副族元素的成矿作用与矿田类型   总被引:2,自引:1,他引:1       下载免费PDF全文
姜莲婷  陈国能 《地学前缘》2011,18(1):95-101
岩石熔融-岩浆固结过程不仅导致花岗岩的形成,同时造成了副族微量元素的富集,形成不同类型的矿床和矿田.根据成矿元素与氧、硫元素的关系,文中将上述元素形成的矿田分为亲氧元素型、亲硫元素型和氧硫复合型.前者产于花岗岩体内部,成矿与成岩基本同时,矿田的形成主要受控于岩浆分异作用和岩体剥蚀深度;次者产于岩体外部,成岩与成矿具有一...  相似文献   

2.
对阿尔泰西段铁列里克闪长岩体进行LA-ICP-MS锆石U-Pb定年,分别获得(420.6±3.0)Ma(MSDW=0.063)和(414.8±2.6)Ma(MSDW=0.52)的成岩年龄,确定其形成于晚志留—早泥盆世。岩石富铝质、轻稀土富集,重稀土亏损,轻重稀土分馏明显,具Eu负异常,富集大离子亲石元素(Rb,Ba,K),具明显的Ba,U,Sr,Ta,Nb,P,Ti负异常。认为铁列里克岩体为高钾钙碱性过铝质I-S型花岗岩,具部分陆壳熔融成因,形成于俯冲造山环境下的陆弧环境,为阿尔泰造山带构造演化模式研究提供了证据。  相似文献   

3.
利用电子探针和激光探针剥蚀系统(LA-ICP-MS)对北羌塘新第三纪高钾钙碱岩系英安岩中角闪石的主元素和微量、角闪石强烈富集Sc、Ti、V、Cr、Co、Ni等不相容亲铁元素,而相对亏损Th、U、Pb、Rb等强不相容的大离子亲石元素。稀土元素丰度高,且无Eu异常,批示北羌塘这套高钾钙碱岩系火山岩可能是青藏高原加厚的相当于榴辉岩相物质组成的下部陆壳脱水熔融的产物。  相似文献   

4.
东昆中隆起带东段闪长岩U-Pb年代学和岩石地球化学研究   总被引:10,自引:5,他引:5  
岩石学、岩石地球化学研究表明,东昆中隆起带东段分布一套高钾的钙碱性闪长岩系列岩石。岩石明显富集大离子亲石元素(如K、Ba、Rb)、LREE和活泼的不相容元素(如Th、U),相对亏损高场强元素(如Nb、Ta、Ti、P),具安第斯型活动大陆边缘岩浆岩特征。该闪长岩属混合成因,即由交代地幔的部分熔融形成基性岩浆,与地壳物质熔融形成的酸性岩浆混合形成。阿斯哈闪长岩LA-ICP-MS锆石U-Pb年龄值为244Ma左右,属印支早期。  相似文献   

5.
杨多  李萌萌  龚全德  陈天红  毛磊  秦天  赵亮 《地质通报》2019,38(10):1660-1674
对内蒙古阿巴嘎旗甘珠音敖包地区中生代火山岩进行了锆石U-Pb测年和岩石地球化学研究,对其形成时代、岩石成因及构造背景给予制约。研究区主要发育中生代满克头鄂博组酸性火山岩和梅勒图组中性火山岩。LA-ICP-MS锆石U-Pb同位素定年结果显示,2组火山岩形成年龄分别为163.6±0.6Ma和139.6Ma±0.7Ma。岩石地球化学研究表明,满克头鄂博组酸性火山岩为碱性系列,具有高硅、富碱、低TFeO、Al_2O_3、TiO_2、MgO、CaO和Na_2O的特征,轻稀土元素富集、重稀土元素亏损、轻重稀土元素分馏明显,Eu强烈亏损,大离子亲石元素Rb、Th、K明显富集,Ba、Sr明显亏损,高场强元素Nb、Ta、P、Ti强烈亏损,具有A型花岗岩特点,形成于陆壳岩石的部分熔融。梅勒图组中性火山岩亦为碱性系列岩石,富碱、富钠、贫钾,高Al2O3、TiO2、MgO,贫CaO,LREE富集,HREE亏损,轻重稀土元素分馏明显,具微弱的负Eu异常,富集大离子亲石元素(LILEs)Rb、Ba、Th、U、K等,亏损高场强元素Nb、Ta、Ti、Y、Yb、Lu等,来源于下地壳镁铁质岩石部分熔融。结合岩石学及该地区构造背景特征,认为满克头鄂博组和梅勒图组火山岩可能形成于蒙古-鄂霍茨克的俯冲作用导致的大兴安岭西坡—冀北—辽西地区加厚陆壳坍塌或拆沉作用的伸展环境。  相似文献   

6.
羌塘西北部松西地区新生代火山岩由安山岩、英安岩和晚期火山颈相流纹斑岩3种岩石类型组成,属于钙碱性-高钾钙碱性岩石系列.岩石富集大离子亲石元素和LREE,相对亏损高场强元素,Nb、Ta、Ti负异常,反映源岩具有壳源特征,基性端员的SiO2含量<53%,表明松西地区玄武安山岩不可能完全由陆壳直接局部熔融产生,应该有少量基性的地幔物质加入.岩浆Eu负异常不明显,说明岩浆来源于加厚陆壳中下部,是印度板块与欧亚板块发生长期碰撞挤压导致青藏高原北部包括羌塘地区的陆壳缩短和加厚、拉萨地块大陆岩石圈的北向俯冲作用以及羌塘陆块之下上涌的软流层物质的底侵作用,引发增厚下地壳发生部分熔融形成的.  相似文献   

7.
大洋山斑岩型钼矿位于大兴安岭东北部呼中区,钼矿体主要产于石英二长斑岩体和上盘围岩中,产状受石英二长斑岩体控制。通过锆石LA-ICP-MS U-Pb定年,获得石英二长斑岩年龄为(119.83±0.87) Ma,可代表成矿年龄。岩石地球化学数据显示岩体偏铝、贫钛、富钾,具钾玄岩特征,为造山带岩石,岩浆熔体未与地幔相互作用;相对富集大离子亲石元素Rb和K,相对亏损高场强元素Nb、Ta、P、Ti和HREE,亲地幔元素亏损、轻稀土富集以及Eu中等亏损等特征显示岩浆源自陆壳。结合区域地质资料认为大洋山斑岩型钼矿形成于早白垩世晚期,成矿物质来源为地壳的重熔,与蒙古—鄂霍茨克洋的俯冲闭合相关,成矿环境为伸展构造背景。  相似文献   

8.
深俯冲陆壳物质部分熔融产生的熔体,实验岩石学方面已有广泛报道,而天然初始熔体的组分却难以厘定。对此,本文从苏鲁超高压地体荣成混合岩中识别出了深俯冲花岗质陆壳部分熔融产生的天然初始熔体组成。野外露头显示,混合岩中主要矿物组成为钾长石+斜长石+石英的浅色熔体呈不连续的条带状与残余体互层产出,指示了原位或近源区的部分熔融特征。混合岩浅色体锆石CL图像呈明显的核-边结构,继承核部为扬子板块来源的岩浆锆石,形成时代为721±24Ma;新生边部CL图像具震荡环带结构,微量元素上REE呈明显左倾,具有Eu的负异常及Ce的正异常,低的Hf/Y和Th/U比值,具深熔锆石特征,指示形成于花岗质陆壳物质的部分熔融。边部U-Pb谐和年龄为225.9±2Ma,略晚于苏鲁超高压地体超高压峰期变质年龄,表明初始熔融发生在超高压地体折返早期。浅色熔体的全岩地球化学特征表明,主量元素上具有高SiO_2、K_2O及Na_2O含量,低的Fe_2O_3~T、MgO及CaO含量,A/CNK=1.02~1.04,呈弱过铝质亚碱性花岗岩的特征,这与实验岩石学中富硅陆壳物质部分熔融产生的熔体组分极为相近;微量元素上富集大离子亲石元素(如Rb、Ba、Pb等),亏损Nb、Ta、Ti等高场强元素,REE呈较为平坦的配分模式,具弱的Eu负异常并亏损Sr。本文通过上述对天然样品研究,厘定了深俯冲花岗质陆壳部分熔融及其初始熔体的组成,为理解大陆俯冲带壳幔相互作用提供了关键依据。  相似文献   

9.
大埠岩体内及近外围铀、钨矿产信息丰富。地球化学特征显示大埠岩体花岗岩呈钙碱性、过铝质,具高硅(73.73%~77.89%)、富钾(3.99%~5.60%)和低钙(0.107%~0.660%)含量特点,铝饱和指数A/NCK为1.04~1.25、里特曼指数δ为1.66~2.34,稀土元素总量低(∑REE=37.28×10-6~177.49×10-6),稀土元素球粒陨石标准化图解表现为左高右低、具强负铕异常的"V"字型,大离子亲石元素K、Rb、Th、Sr等富集,Ta、P、Ti亏损,这些特点说明岩体的形成是古老陆壳物质熔融的结果。岩体地球化学特征与华南产铀花岗岩和含钨花岗岩地球化学特征相似,结合近年来铀、钨矿勘查取得的新成果,认为大埠岩体具较大的铀、钨成矿潜力。  相似文献   

10.
为确定藏东日扎山一带马拉松多组流纹岩的形成时代及成岩构造环境,探讨古特提斯洋闭合时间,应用LA-ICP-MS方法对其进行锆石U-Pb精确定年,并开展岩石学和地球化学研究。结果表明,该区流纹岩岩浆锆石206Pb/238U年龄加权平均值为244±1.2Ma,较精确地限定了马拉松多组流纹岩的形成时代,为中三叠世早期。岩相学及地球化学研究结果显示,马拉松多组流纹岩具高硅(Si O_2=72.72%~76.88%),富碱((K_2O+Na_2O)=6.64%~7.41%,K_2ONa_2O),过铝质(Al_2O_3=11.76%~13.03%,A/CNK=1.17~1.31)特征;岩石富集大离子亲石元素K、Rb,高场强元素Th、U,而亏损大离子亲石元素Sr和Ba,高场强元素Nb、Ta、P、Zr、Hf、Ti等;稀土元素配分模式表现出轻稀土元素富集(LREE/HREE=1.93~2.89),轻稀土元素分馏程度稍高于重稀土元素的右倾V字形分布模式,具有明显的负Eu异常(δEu=0.36~0.41);其成因可能与幔源岩浆的底侵和加厚地壳的减薄有关,是幔源基性岩浆底侵导致地壳物质脱水发生部分熔融的产物,即主要是陆壳和硅铝质源岩部分熔融形成的,岩浆在上升过程中经历了结晶分异作用。其化学性质具有S型向A型流纹岩演化的趋势,以及同碰撞弧火山岩与碰撞后A型流纹岩的双重特性。综合研究认为,研究区在早中三叠世处于弧-陆碰撞后活动大陆边缘短暂的后造山伸展构造环境,古特提斯洋(金沙江洋)在此之前已经闭合。  相似文献   

11.
岩石成因与岩石圈演化思考   总被引:4,自引:0,他引:4       下载免费PDF全文
岩石圈内能变化导致岩石的形成和消亡.组成岩石圈的三种不同类型岩石的形成和消亡过程在岩石圈表面引起不同的大地构造效应.大洋岩石圈和大陆岩石圈的演化效应存在互补关系:前者内能升高导致岩石形成,反之岩石消亡;后者内能升高导致岩石消亡,反之岩石形成;前者造成平、剖面上均自洋中脊向外变老的岩石序列,后者造成平面上自陆核向外变新,...  相似文献   

12.
Five domains (microplates) have been recognized by seismic anisotropy in the mantle lithosphere of the Bohemian Massif. The mantle domains correspond to major crustal units and each of the domains bears a consistent fossil olivine fabric formed before their Variscan assembly. The present-day mantle fabric indicates that this process consisted of at least three oceanic subductions, each followed by an underthrusting of the continental lithosphere. The seismic anisotropy does not detect remnants of the oceanic subductions, but it can trace boundaries of the preserved continental domains subsequently underthrust along the paths of previous oceanic subductions. The most robust continent–continent collision was followed by westward underthrusting of the Brunovistulian mantle lithosphere, still detectable by seismic anisotropy more than 100 km beneath the Moldanubian mantle lithosphere. Major occurrences of the high-pressure/ultra high-pressure (HP–UHP) rocks follow the ENE and NNE oriented sutures and boundaries of the mantle–lithosphere domains mapped from three-dimensional modeling of body-wave anisotropy. The HP–UHP rocks are products of oceanic subductions and the following underthrusting of the continental crust and mantle lithosphere exhumed along the mantle boundaries. The close relation of the mantle sutures and occurrences of the HP–UHP rocks near the paleosubductions testifies for models interpreting the granulite–garnet peridotite association by oceanic/continental subduction/underthrusting followed by the exhumation of deep-seated rocks. Our findings support the bivergent subduction model of tectonic development of the central part of the Bohemian Massif. The inferences from seismic anisotropy image the Bohemian Massif as a mosaic of microplates with a rigid mantle lithosphere preserving a fossil olivine fabric. The collisional mantle boundaries, blurred by tectonometamorphic processes in easily deformed overlying crust, served as major exhumation channels of the HP–UHP rocks.  相似文献   

13.
Fluids, tectonics and crustal deformation   总被引:1,自引:0,他引:1  
In the plate tectonic process, lithosphere creation at ocean ridges and its cooling leads to volatile fixation in the oceanic crust. The outer 10 km or so of all crust contains abundant water in pores and fractures and variable amounts of volatiles in minerals. When surface rocks are buried by tectonic processes, fluids must be released and modify the mechanical properties. In the subduction process hydrated oceanic crust may be decoupled from the remaining oceanic lithosphere. At depth rising aqueous fluids or melts lead to a complex series of mass-energy transfer processes which may decouple continental crust near the Moho. Continental crust if subducted, may also be decoupled from its lithosphere by degassing. Fluid release processes which create gas-solid mixtures beneath impermeable cover create low-strength systems subject to facile deformation, hydraulic fracture processes and diapiric phenomena.  相似文献   

14.
Subduction zones of continental, transitional, and oceanic settings, relative to the nature of the overriding plate, are compared in terms of trace element compositions of mafic to intermediate arc rocks, in order to evaluate the relationship between subduction parameters and the presence of subduction fluids. The continental Chilean Southern Volcanic Zone (SVZ) and the transitional to oceanic Central American Volcanic Arc (CAVA) show increasing degrees of melting with increasing involvement of slab fluids, as is typical for hydrous flux melting beneath arc volcanoes. At the SVZ, the central segment with the thinnest continental crust/lithosphere erupted the highest-degree melts from the most depleted sources, similar to the oceanic-like Nicaraguan segment of the CAVA. The northern part of the SVZ, located on the thickest continental crust/lithosphere, exhibits features more similar to Costa Rica situated on the Caribbean Large Igneous Province, with lower degrees of melting from more enriched source materials. The composition of the slab fluids is characteristic for each arc system, with a particularly pronounced enrichment in Pb at the SVZ and in Ba at the CAVA. A direct compositional relationship between the arc rocks and the corresponding marine sediments that are subducted at the trenches clearly shows that the compositional signature of the lavas erupted in the different arcs carries an inherited signal from the subducted sediments.  相似文献   

15.
Oceanic arcs are commonly cited as primary building blocks of continents, yet modern oceanic arcs are mostly subducted. Also, lithosphere buoyancy considerations show that oceanic arcs (even those with a felsic component) should readily subduct. With the exception of the Arabian–Nubian orogen, terranes in post-Archean accretionary orogens comprise < 10% of accreted oceanic arcs, whereas continental arcs compose 40–80% of these orogens. Nd and Hf isotopic data suggest that accretionary orogens include 40–65% juvenile crustal components, with most of these (> 50%) produced in continental arcs.Felsic igneous rocks in oceanic arcs are depleted in incompatible elements compared to average continental crust and to felsic igneous rocks from continental arcs. They have lower Th/Yb, Nb/Yb, Sr/Y and La/Yb ratios, reflecting shallow mantle sources in which garnet did not exist in the restite during melting. The bottom line of these geochemical differences is that post-Archean continental crust does not begin life in oceanic arcs. On the other hand, the remarkable similarity of incompatible element distributions in granitoids and felsic volcanics from continental arcs is consistent with continental crust being produced in continental arcs.During the Archean, however, oceanic arcs may have been thicker due to higher degrees of melting in the mantle, and oceanic lithosphere would be more buoyant. These arcs may have accreted to each other and to oceanic plateaus, a process that eventually led to the production of Archean continental crust. After the Archean, oceanic crust was thinner due to cooling of the mantle and less melt production at ocean ridges, hence, oceanic lithosphere is more subductable. Widespread propagation of plate tectonics in the late Archean may have led not only to rapid production of continental crust, but to a change in the primary site of production of continental crust, from accreted oceanic arcs and oceanic plateaus in the Archean to primarily continental arcs thereafter.  相似文献   

16.
The strength of the oceanic and continental lithosphere has important controls on some of the major geological processes on earth including the operation of plate tectonics and the long-term stability of the continental roots.However,explaining these major geological features from the experimental and theoretical studies on the strength of rocks is challenging and some of the existing models for the strength of the lithosphere do not explain these main geological observations.A brief review is provided to s...  相似文献   

17.
俯冲带部分熔融   总被引:3,自引:3,他引:0  
张泽明  丁慧霞  董昕  田作林 《岩石学报》2020,36(9):2589-2615
俯冲带是地幔对流环的下沉翼,是地球内部的重要物理与化学系统。俯冲带具有比周围地幔更低的温度,因此,一般认为俯冲板片并不会发生部分熔融,而是脱水导致上覆地幔楔发生部分熔融。但是,也有研究认为,在水化的洋壳俯冲过程中可以发生部分熔融。特别是在下列情况下,俯冲洋壳的部分熔融是俯冲带岩浆作用的重要方式。年轻的大洋岩石圈发生低角度缓慢俯冲时,洋壳物质可以发生饱和水或脱水熔融,基性岩部分熔融形成埃达克岩。太古代的俯冲带很可能具有与年轻大洋岩石圈俯冲带类似的热结构,俯冲的洋壳板片部分熔融可以形成英云闪长岩-奥长花岗岩-花岗闪长岩。平俯冲大洋高原中的基性岩可以发生部分熔融产生埃达克岩。扩张洋中脊俯冲可以导致板片窗边缘的洋壳部分熔融形成埃达克岩。与俯冲洋壳相比,俯冲的大陆地壳具有很低的水含量,较难发生部分熔融,但在超高压变质陆壳岩石的折返过程中可以经历广泛的脱水熔融。超高压变质岩在地幔深部熔融形成的熔体与地幔相互作用是碰撞造山带富钾岩浆岩的可能成因机制。碰撞造山带的加厚下地壳可经历长期的高温与高压变质和脱水熔融,形成S型花岗岩和埃达克质岩石。  相似文献   

18.
Deep marine deposits of the Gramscatho Basin of south Cornwall reflect two tectonic regimes; Early to Middle Devonian rifting of continental lithosphere with formation of oceanic lithosphere to the south, and Middle Devonian to earliest Carboniferous convergence along its southern margin. Sediments on thinned continental crust to the north and oceanic lithosphere to the south were juxtaposed in the Late Devonian when nappes of deep water flysch and olistostrome were thrust up on to the northern continental margin of the basin. Basin closure was accommodated by forward propagating thrust nappes, accompanied by penecontemporaneous sedimentation. The stratigraphical sequences of major nappes illustrate the progradation of flysch with climactic sedimentation of olistostrome in late Mid- to Late Devonian times. The Lizard Complex, including the Lizard ophiolite, within that nappe stack, constitutes part of one of the GCR sites which are largely in the allochthonous rocks. Many of those sites feature the olistostrome, Roseland Breccia Formation, with its great variety of sedimentary, igneous and metamorphic clasts (up to 1.5 km), and the association of ocean floor basalt and penecontemporaneous acidic volcanics indicative of the coming together of oceanic and continental plates. A site at the top of the parautochthonous continental margin succession displays the erosion products of the youngest nappe as it emerged and advanced across the sediment surface, marking closure of the oceanised Gramscatho Basin and continental collision.  相似文献   

19.
蛇绿岩型金刚石和铬铁矿深部成因   总被引:5,自引:0,他引:5  
地球上的原生金刚石主要有3种产出类型,分别来自大陆克拉通下的深部地幔金伯利岩型金刚石、板块边界深俯冲变质岩中超高压变质型金刚石,和陨石坑中的陨石撞击型金刚石。在全球5个造山带的10处蛇绿岩的地幔橄榄岩或铬铁矿中均发现金刚石和其他超高压矿物的基础上,我们提出地球上一种新的天然金刚石产出类型,命名为蛇绿岩型金刚石。认为蛇绿岩型金刚石普遍存在于大洋岩石圈的地幔橄榄岩中,并提出蛇绿岩型金刚石和铬铁矿的深部成因模式。认为早期俯冲的地壳物质到达地幔过渡带(410~660 km深度)后被肢解,加入到周围的强还原流体和熔体中,当熔融物质向上运移到地幔过渡带顶部,铬铁矿和周围的地幔岩石以及流体中的金刚石等深部矿物一并结晶,之后,携带金刚石的铬铁矿和地幔岩石被上涌的地幔柱带至浅部,经历了洋盆的拉张和俯冲阶段,最终在板块边缘就位。  相似文献   

20.
大洋岩石圈和大陆岩石圈的元素丰度   总被引:6,自引:0,他引:6  
根据大洋地壳、大陆地壳、上地幔和球岩石圈的元素丰度资料,本文初次分别求出大洋岩石圈和大陆岩石圈的元素丰度.可用作研究化学元素在洋圈或陆圈内各地区分布特征的地球化学背景值.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号