共查询到20条相似文献，搜索用时 250 毫秒
1.
利用惯量椭圆进行岩石有限应变分析 总被引：3，自引：0，他引：3
提出了利用惯量椭圆对任意形状矿物颗粒进行描述的方法，并利用惯量椭圆理论，计算了岩石薄片中任意形状矿物颗粒的惯量椭圆，通过颗粒面积对椭圆参数进行标准化，得到每一矿物颗粒的等效应变椭圆。等效应变椭圆能够有效地反映对应矿物颗粒的优选方位以及变形特征，进而利用椭圆的矩阵参数形式对等效应变椭圆进行统计分析，获得岩石的有限应变椭圆；同时给出了相应的数值计算方法，编制了软件Straindesk，并得到了成功的应用。该方法克服了先前应变测量中的局限性，方便实现计算机的自动分析，具有较强的有效性和广泛的适用性。 相似文献
2.
有限应变测量是韧性变形定量估算的主要手段。Fry法有限应变测量以变形颗粒,如变形砾石、鲕粒、近等轴矿物等为应变标志体,地质实践中较容易获得,是岩石有限应变测量的最普遍手段。其传统测量过程极为繁琐,难以满足大范围应变测量的要求,数据精度也较低,限制了Fry法的应用。前人曾根据Fry法原理设计了计算机程序,但其程序相关编程语言如今已基本不能使用。本研究基于目前地质上较普遍使用的制图软件CorelDRAW平台的VBA编程,设计出一个基于CorelDRAW平台的Fry法应变测量宏程序FRY-1。在新图层上将所有变形颗粒的中心点标出后,运行FRY-1宏程序即可快速得到精确的Fry图解,并计算出相对精确的R值。通过实例与“最邻近心对心法”的测量结果进行的对比,证明该方法简便易操作,并可大幅提高有限应变测量的效率和有效减小误差。 相似文献
3.
4.
5.
岩石有限应变测量反向轮法的计算机CSD软件设计 总被引：4，自引：0，他引：4
用计算机实现反向轮法测岩石有限应变的过程, 可提高有限应变测量的准确性和效率.开发出了用Visual Basic 5.0编写的CSD软件, 利用岩石薄片图像或者矿物颗粒轮廓图测出岩石有限应变的大小及应变椭圆长轴方向, 同时测出矿物颗粒分布的优选方位.其操作相当简便, 首先统计出图像中0°~180°各方向上矿物颗粒的边界数目; 然后在方位-边界坐标系中投点, 并利用最小二乘法进行数据点的多项式曲线拟合; 最后求出曲线的极值点坐标, 并根据坐标绘制相应的应变椭圆.软件运行中, 统计出的边界数据和拟合曲线以及应变椭圆图形都是可视的, 并能进行相应的保存. 相似文献
6.
鄂东南铁山不对称骨节状石香肠构造基质层中的应变测量与分析 总被引：1，自引：1，他引：0
鄂东南铁山是亚洲首个发现骨节状石香肠构造的地区。以该区不对称骨节状石香肠构造为研究对象,利用惯量椭圆法对其基质层进行有限应变测量,获得真应变差、运动学涡度等相关参数及有限应变椭圆长轴展布方位的分布图。对所获数据资料研究表明:该不对称骨节状石香肠构造基质层的应变受其能干层控制,有限应变值与其离能干层的距离趋于负相关,且与其矿物颗粒粒径呈负相关,在平行于石香肠构造伸展方向上基质层有限应变分布不均;石香肠体附近与之相近规模的变形构造可使其相应基质中的应变分布紊乱;该不对称骨节状石香肠构造是由早期平行于层面简单剪切叠加晚期平行层面伸长、垂直层面压缩的纯剪切作用形成。与不对称鱼嘴状石香肠构造对比研究表明,两者基质层中简单剪切与纯剪切的分布均分别与其相对增厚与减薄区段对应,而两者形态的不同主要与石香肠体不连续处充填物的能干性不同有关,再次表明两者均是较好的岩石流变学标志。 相似文献
7.
粗粒料是一定级配的岩石颗粒集合体,具有独特的物理力学特性。以粗粒料室内三轴固结排水试验成果为基础,基于离散元颗粒流理论,从细观角度出发,以PFC3D为工具,通过自编程及二次开发,得到按级配生成的粗粒料三轴试验数值模型。引入clump颗粒考虑颗粒形状对粗粒料强度及变形的影响,分析剪胀、颗粒形状、颗粒重排的关系。结果表明：颗粒形状是影响粗粒料强度与变形的主要因素,在其他细观参数一定的情况下,改变颗粒形状,可以显著影响粗粒料的力学行为;BPM模型的应力-应变关系只在低围压下与试验值吻合,随着围压的增大,偏差越来越大;而引入clump颗粒的PFC3D数值模型能很好地模拟粗粒料室内三轴固结排水试验的应力-应变特性,但由于BPM及clump都是刚性颗粒,没有考虑颗粒变形及破碎,造成应变剪胀偏大。 相似文献
8.
河流搬运体系中,颗粒的形状属性可以反映其来源、搬运、沉积的过程。长期以来沉积学界缺乏相对统一的定量的、多维的颗粒形状参数。本研究以西藏雅鲁藏布江支流帕隆藏布为例,运用图像分析、软件分析等计算机辅助技术,对8个天然河流砂样品中的2276个颗粒开展碎屑成分鉴定和形状参数量化等工作。重点评估了11个颗粒形状参数,通过因子分析等统计方法提取并定义了3个形状信号,包括圆形度因子、规则度因子和平滑度因子。这些参数可用于表征颗粒宏观形状上接近圆形的程度、中观尺度上轮廓规则的程度及轮廓平滑的程度。挖掘天然河流砂的重要形状特征后,进一步探索了这些形状参数与颗粒成分、粒度的关系。本研究成果为解释河流系统中颗粒的形状信号、理解颗粒自身微观属性和外部物理过程等提供重要借鉴。 相似文献
9.
珊瑚颗粒形状不规则是其显著区别于陆源土的一大特征。为揭示珊瑚颗粒形状对钙质粗粒土压缩性能的影响,人工挑选出不同形状(块状、枝状、棒状、片状)的珊瑚颗粒,以块状颗粒为基础,与其他3种不同形状的粗颗粒任意一种混合,控制不同颗粒形状配比制成钙质粗粒土试样,完成室内压缩试验,对比分析试验前后珊瑚颗粒的圆度、长宽比、扁平度和凹凸度等形状参数,评价颗粒形状对压缩性能的影响。结果表明:(1)粒径为10~20 mm钙质粗粒土的压缩模量是4~5. 5 MPa,回弹系数为42~53;(2)随枝状、棒状或片状颗粒掺量的增加(0、10%、20%、30%),试样压缩模量呈小幅波状变化,回弹系数呈持续减小趋势;(3)各加载区间应力-应变曲线包括应力快速增长阶段、应力-应变同步增长阶段、应变增长阶段共3个阶段和1个稳定点;(4)随枝状颗粒掺量的增加,试样的长宽比和凹凸度逐渐增加,圆度和扁平度基本无变化;因颗粒破碎的影响,试验后试样的长宽比及扁平度有所增加,圆度及凹凸度则有所减小。选择钙质粗粒土地基时,应考虑其压缩性能,避免施工初期的快速加载。 相似文献
10.
河流搬运体系中,颗粒的形状属性可以反映其来源、搬运、沉积的过程。长期以来沉积学界缺乏相对统一的定量的、多维的颗粒形状参数。本研究以西藏雅鲁藏布江支流帕隆藏布为例,运用图像分析、软件分析等计算机辅助技术,对8个天然河流砂样品中的2276个颗粒开展碎屑成分鉴定和形状参数量化等工作。重点评估了11个颗粒形状参数,通过因子分析等统计方法提取并定义了3个形状信号,包括圆形度因子、规则度因子和平滑度因子。这些参数可用于表征颗粒宏观形状上接近圆形的程度、中观尺度上轮廓规则的程度及轮廓平滑的程度。挖掘天然河流砂的重要形状特征后,进一步探索了这些形状参数与颗粒成分、粒度的关系。本研究成果为解释河流系统中颗粒的形状信号、理解颗粒自身微观属性和外部物理过程等提供重要借鉴。 相似文献
11.
《Sedimentology》2018,65(5):1761-1776
Grain shape plays an important role in textural analysis of sedimentary grains. Textural analysis helps to determine the formation, transportation and deposition processes of sedimentary rocks. However, there is a lack of standardized methodology for quantitative characterization of grain shapes. The utility of fully automated image analysis for grain shape measurement is assessed in this paper. This research aimed to identify the most useful shape parameters for textural characterization of populations of grains and determine the relative importance of the parameters. A key aspect of this study is to determine whether, in a particular sedimentary environment, textural maturity of the samples can be ranked based on their grain shape data. Furthermore, discrimination of sedimentary depositional environments is explored on the basis of grain shape. In this study, 20 loose sediment samples from four known depositional environments (beach, aeolian, glacial and fluvial) were analysed using newly implemented automatic image analysis methods. For each sample, a set of 11 shape parameters were calculated for 200 grains. The data demonstrate a progression in textural maturity in terms of roundness, angularity, irregularity, fractal dimension, convexity, solidity and rectangularity. Furthermore, statistical analysis provides strong support for significant differences between samples grouped by environment and generates a ranking consistent with trends in maturity. Based on novel application of machine learning algorithms, angularity and fractal dimension are found to be the two most important parameters in texturally classifying a grain. The results of this study indicate that textural maturity is readily categorized using automated grain shape parameter analysis. However, it is not possible to absolutely discriminate between different depositional environments on the basis of shape parameters alone. This work opens up the possibility of detailed studies of the relationship between textural maturity and sedimentary environment, which may be more complicated than previously considered. 相似文献
12.
三维地质模型构建方法的研究及应用 总被引：25，自引：3，他引：22
地质体三维建模是地学信息系统的核心问题之一.对三维GIS及地学领域的空间构模方法的现状进行分析,结合地质体工程特点,提出一种三维地学空间构模方法--似三棱柱(STP)法.该方法以似三棱柱体作为三维地质体建模的基本体元,并采用5类基本元素和6组拓扑关系对似三棱柱体的数据结构进行描述.它能有效地表达各种三维地质现象,也可以更好地与传统的多层TIN模型结合,维护好空间实体的拓扑关系.基于本文的建模方法开发了一个适合地质领域的三维GIS初步原型,并用实际钻孔数据进行了验证. 相似文献
13.
基于组件体系结构的地质GIS应用系统开发研究 总被引：4，自引：3，他引：4
组件技术和面向对象技术是现代GIS软件的发展趋势之一。提出应用基于COM的组件技术开发地质领域GIS应用系统。该系统建立在组件式GIS通用平台上，用构造COM对象的方法建立扩展的地质空间数据模型，各种处理、分析和解释的地质研究模型和可视化系统均以组件形式集成到系统中，并直接处理各种地质对象，以突破传统的以地图为处理基础的空间处理方式，提高地质空间分析和处理能力。 相似文献
14.
颗粒模型的不确定性(颗粒形状、大小及空间分布等)严重影响岩石(体)数值模拟结果的可靠性与合理性。基于UDEC软件中的Voronoi颗粒模型,提出了两种Trigon颗粒模型的建立方法并通过软件自带的FISH语言实现。同时,深入分析了单轴压缩条件下颗粒形状、迭代次数(颗粒大小)和随机种子数(颗粒空间分布)对煤岩试样宏观力学行为及其破坏模式的影响。研究结果表明,迭代次数和随机种子数对煤岩单轴抗压强度及其变形特性的影响与颗粒形状相关:对于Trigon颗粒模型,两者影响程度相当;对于Voronoi颗粒模型,随机种子数的影响明显大于迭代次数。煤岩试样破坏过程中产生的微裂纹类型、数量及其发展规律主要受颗粒形状的影响,而受迭代次数和随机种子数的影响不大。岩石试样的破坏模式同时受颗粒形状、迭代次数和随机种子数的影响。因此,真实考虑岩石(体)组成物质的颗粒形状、大小及其空间分布,可有效提高颗粒模型数值模拟的真实性与可靠性。 相似文献
15.
M. A. Romanova 《Mathematical Geology》1970,2(3):231-240
The effect of mineral grain shape and specific gravity on trend-surface gradients of mineral concentrations was investigated.
Trend surfaces were computed by least-square procedures, and the influence of different combinations of grain shape and specific
gravity was checked using a set of linear hypotheses in the form of an analysis of variance. 相似文献
16.
Estimating the settling velocity of bioclastic sediment using common grain‐size analysis techniques 
下载免费PDF全文
下载免费PDF全文 Michael V. W. Cuttler Ryan J. Lowe James L. Falter Daniel Buscombe 《Sedimentology》2017,64(4):987-1004
Most techniques for estimating settling velocities of natural particles have been developed for siliciclastic sediments. Therefore, to understand how these techniques apply to bioclastic environments, measured settling velocities of bioclastic sedimentary deposits sampled from a nearshore fringing reef in Western Australia were compared with settling velocities calculated using results from several common grain‐size analysis techniques (sieve, laser diffraction and image analysis) and established models. The effects of sediment density and shape were also examined using a range of density values and three different models of settling velocity. Sediment density was found to have a significant effect on calculated settling velocity, causing a range in normalized root‐mean‐square error of up to 28%, depending upon settling velocity model and grain‐size method. Accounting for particle shape reduced errors in predicted settling velocity by 3% to 6% and removed any velocity‐dependent bias, which is particularly important for the fastest settling fractions. When shape was accounted for and measured density was used, normalized root‐mean‐square errors were 4%, 10% and 18% for laser diffraction, sieve and image analysis, respectively. The results of this study show that established models of settling velocity that account for particle shape can be used to estimate settling velocity of irregularly shaped, sand‐sized bioclastic sediments from sieve, laser diffraction, or image analysis‐derived measures of grain size with a limited amount of error. Collectively, these findings will allow for grain‐size data measured with different methods to be accurately converted to settling velocity for comparison. This will facilitate greater understanding of the hydraulic properties of bioclastic sediment which can help to increase our general knowledge of sediment dynamics in these environments. 相似文献
17.
文章回顾了粒度分析的历史,总结了常用的粒径类型,介绍了粒度标准和目前沉积学中常用的5种粒度分析方法,并对其中的沉降法、场干扰分析法、图像法作了详细的分类说明。此外,对每一种粒度分析方法的适用范围、测定原理以及其存在的优缺点也进行了详细的介绍。其中：直接测量法简单易行,但精度较差;筛析法较为普遍,但只限于松散或弱胶结沉积物,且不能反映颗粒形状;沉降法适用于松散样、弱胶结样和液体样的分析,可对细砂、粉砂或泥等细粒沉积物进行测量;场干扰法主要依据碎屑颗粒的衍射、散射及电压脉冲响应进行,固体样和液体样均可,精度高,适用性广;图像法手段多样,简单直观,操作性强。总体上,未来的几十年内,粒度分析方法仍将是新旧技术并存,多种方法共用的状况。 相似文献
18.
Shape preferred orientation of object populations: automatic analysis of digitized images 总被引：1，自引：0，他引：1
An automatic technique is presented for systematic shape preferred orientation (SPO) analysis of crystal fabrics in rocks. This technique is based on digitization of an image with a CCD camera and separation of an object population from its matrix. The image is analysed globally using a rotating grid that is superimposed on the square pixel grid of the computer screen. The parametric method is based on counting intercepts in all directions. The interceps rose provides information on both the orientation and strength of the SPO. Problems of hardware-related counting noise anisotropy are avoided using an original method of filtering the intercept function with a linear, sliding mask on the counting grid. The technique was tested both on single objects of different shapes and on different populations of identical objects. A very high degree of accuracy was obtained for orientation measurements. Fabric shape parameters are introduced which are specific to this intercept technique; they compare favourably with shape parameters used in axial fabric analysis. 相似文献
19.
Settling rates of natural sand-size particles are influenced, to some extent, by their shapes and this may be an important factor in using settling rates to estimate grain size. In order to gauge the sensitivity of this influence, two natural sand populations from the Mesozoic Nubian Sandstones of Southern Israel, with a high probability of being similar in their bulk shape characteristics, were examined in ¼φ sieved fractions for their shape characteristics and settling rates. Fine surface features (roundness and surface roughness) were evaluated using Fourier shape analytical methods. Significant differences in bulk shape were detected and their influence on settling rates was measured empirically in a settling tube. The most marked differences were in the coarse grain sizes and, to a lesser extent, in the intermediate sizes. Sampling of raw settling data at closely-spaced time intervals yielded high-resolution grain size frequency plots which were usually polymodal in nature. Subtle shape contrasts, which are an important influence on settling rates, are thus an important consideration when working at this level of sensitivity. Natural sand populations which have followed a more varied provenance or process pathway could be expected to have even greater contrasts in settling rates than the samples analysed here. Thus it is recommended that the bulk shape factor should be taken into account in order to minimize errors in the conversion of settling times to grain size. An easy method, outlined in this paper, is through the establishment of an empirically derived calibration curve for each individual suite of sand undergoing analysis. Sieved ¼φ samples, derived from a split of the total composite sample undergoing analysis, forms the basis of the calibration and hence a correction factor converting sieve diameters to true diameters must be applied. In this research, nominal section diameters were obtained optically through an image analyser. 相似文献
20.
《地学前缘(英文版)》2021,12(4)
As a GIS tool,visibility analysis is used in many areas to evaluate both visible and non-visible places.Visibility analysis builds on a digital surface model describing the terrain morphology,including the position and shapes of all objects that can sometimes act as visibility barriers.However,some barriers,for example vegetation,may be permeable to a certain degree.Despite extensive research and use of visibility analysis in different areas,standard GIS tools do not take permeability into account.This article presents a new method to calculate visibility through partly permeable obstacles.The method is based on a quasi-Monte Carlo simulation with 100 iterations of visibility calculation.Each iteration result represents 1% of vegetation permeability,which can thus range from1% to 100% visibility behind vegetation obstacles.The main advantage of the method is greater accuracy of visibility results and easy implementation on any GIS software.The incorporation of the proposed method in GIS software would facilitate work in many fields,such as architecture,archaeology,radio communication,and the military. 相似文献