共查询到20条相似文献，搜索用时 15 毫秒
1.
笔者系统分析了1918—2005年间中国大陆及其周缘发生的3130个中、强地震的震源机制解,根据其特征进行了岩石圈应力场构造分区,首次得到区域应力场的压应力轴和张应力轴空间分布的统计数字结果。在此基础上研究了应力场的区域特征、探讨了其动力学来源以及构造运动特征。总体结果表明,中国大陆及其周缘岩石圈应力场和构造运动可以归结为印度洋板块、太平洋板块、菲律宾海板块与欧亚板块之间相对运动,以及大陆板内区域块体之间的相互作用的结果。印度洋板块向欧亚板块的碰撞挤压运动所产生的强烈的挤压应力,控制了喜马拉雅、青藏高原、中国西部乃至延伸到天山及其以北的广大地区。在青藏高原周缘地区和中国西部的大范围内,压应力P轴水平分量方位位于20～40°,形成了近NE方向的挤压应力场。大量逆断层型强震集中发生在青藏高原的南、北和西部周缘地区,以及天山等地区。而多数正断层型地震集中发生在青藏高原中部高海拔的地区,断层位错的水平分量位于近东西方向。表明青藏高原周缘区域发生南北向强烈挤压短缩的同时,中部高海拔地区存在着明显的近东西向的扩张运动。中国东部的华北地区受到太平洋板块向欧亚板块俯冲挤压的同时,又受到从贝加尔湖经过大华北直到琉球海沟的广阔地域里存在着的统一的、方位为170°的引张应力场的控制。华北地区大地震的震源机制解均反映出该区地震的发生大体为NEE向挤压应力和NNW向张应力的共同作用结果。台湾纵谷断层是菲律宾海板块与欧亚板块之间碰撞挤压边界。来自北西向运动的菲律宾海板块构造应力控制了从台湾纵谷、华南块体,直到中国南北地震带南段东部地域的应力场。地震的震源机制结果还表明,将中国大陆分成东、西两部分的中国南北地震带是印度洋板块、菲律宾海板块与太平洋板块在中国大陆内部影响控制范围的分界线。 相似文献
2.
综合已有的研究成果,根据长江经济带活动构造块体和构造应力场的分布特征进行了构造应力场分区,总体上划分为华北应力分区、华南应力分区以及青藏高原应力分区,其中华南应力分区是长江经济带的主体应力分区。在此基础上,根据长江经济带的活动断裂及构造块体划分建立了有限元网格模型,利用二维有限元对长江经济带的构造应力场进行模拟,并分析了长江经济带的动力学环境。研究表明,长江经济带构造应力场受印度板块、太平洋板块和菲律宾板块联合作用控制,印度板块与欧亚板块的碰撞作用决定了长江经济带总体构造应力场的主要趋势,局部区域受到周边构造环境的影响;东南部处于菲律宾板块向欧亚板块俯冲所诱发的拉张环境,表现为冲绳海槽,西南部受印度板块北移所诱发的缅甸板块的剪切拉张作用,表现为实皆断裂及其西侧的缅甸中央盆地;青藏高原东缘物质横向挤出过程中受到太平洋板块和菲律宾板块的联合俯冲作用,对长江经济带地应力场的分布特征产生重要影响。 相似文献
3.
印度-澳大利亚板块的边界类型和性质十分复杂。本文采用伪三维有限元方法,利用WSM2000观测应力场数据的应力取向和应力状态作为主要约束,建立了印度-澳大利亚板块岩石层三维模型,对印度-澳大利亚板块构造应力场进行了数值模拟,进而探讨印度-澳大利亚板块所受边界力对板块内部应力场的影响。结果显示,印度-澳大利亚板块的构造应力场主要受到两个因素的控制:①软流层静压推力;②来自碰撞带的阻力,包括喜马拉雅、巴布亚新几内亚、新西兰和印度-澳大利亚板块与欧亚板块的西北边界。而来自俯冲消减带的拉张作用力对板内应力场的作用相对较小。 相似文献
4.
全球应力场与构造分析 总被引：16，自引：1，他引：16
介绍了近年来全球构造应力研究方面的一些新进展并以“世界应力图”提供的资料为背景 ,结合一些最新的研究成果 ,阐述了全球构造应力场的分布特征及其与板块构造运动之间的联系。研究结果表明 :(1)全球存在大尺度的统一性构造应力场 ;(2 )全球大多数板块内部地区为挤压应力作用 ,其应力结构多为逆断型、走滑型或逆走滑型 ;(3)大陆板块内部的扩张区大多位于高海拔异常地区 ,其应力结构为正断型或正走滑型 ,如青藏高原、东非裂谷和贝加尔裂谷等 ;(4)全球大部分地区的地壳上部构造应力作用方向较为均一 ,存在区域统一应力场 ;(5 )全球大部分地区的最大水平主应力方向与板块绝对运动 (角速度 )迹线保持较好的一致性 ,反映出构造应力与板块运动的关系密切 ;(6 )板块汇聚、洋脊扩张可能是产生岩石圈上部构造应力的主要力源。 相似文献
5.
鄂尔多斯盆地构造应力场特征及其构造背景 总被引：20，自引：9，他引：20
通过大量断层和褶皱的野外观测以及构造形成序列的确定,同时考虑盆地形成演化过程中板块动力学背景,并结合前人的研究成果,开展了鄂尔多斯盆地古构造应力场的研究。研究表明盆地区域主压应力场方向在加里东期呈NNE-SSW向和近SN向,主要是晚奥陶世以来秦岭洋盆向北俯冲并与华北板块碰撞的结果;印支期主要呈NW-SE向和NNE-SSW向、SN向,主要受中特提斯构造动力体系中羌塘地块与欧亚大陆碰撞拼贴产生的远程构造效应影响;燕山期主要呈NW-SE向,主要受古太平洋大陆板块与欧亚大陆板块碰撞远程构造效应影响,盆地西南缘呈NE-SW向;喜马拉雅期呈NNE-SSW向,主要受新特提斯构造动力体系和今太平洋构造动力体系联合作用影响,即今太平洋板块和印度板块与欧亚板块俯冲碰撞有关。 相似文献
6.
XU Jiren ZHAO Zhixin Institute of Geology Chinese Academy of Geological Science Beijing China Kono Yoshiteru Faculty of Science Kanazawa University Kanazawa - Japan 《Continental Dynamics》2000,(1)
1. IntroductionThe Nankai Trough region (Fig. 1.1) of southwest Japan is one of the most tectonically complex subduction zones in the world. The subduction of the Philippine Sea plate (PH) beneath the Eurasian plate (EU) has caused a series of large and great interplate earthquakes. It is generally accepted that great earthquakes have occurred at intervals of 100-150 years along the Nankai subduction zone since the 684 Hakuho earthquake (Fig. 1.2). However, a large earthquake (M>7.5) has… 相似文献
7.
红河平原在新生代期间受印度板块、欧亚板块和太平洋板块三大板块的影响,其构造应力场复杂多样.通过研究红河平原新生代构造应力场的变化规律,确定在新生代早期红河平原地区的构造应力场特点为东西的挤压应力场与左旋走滑机制,晚期则转变为南北的挤压应力场与右旋走滑机制,且右旋走滑作用在东南部地区呈增加趋势.红河平原区的这种构造应力场的变化为对红河三角洲的形成和发展提供了条件,控制了红河平原地区的现代构造活动特征. 相似文献
8.
Robert B. Smith 《Tectonophysics》1977,37(4):323-336
Fault-plane solutions, Cenozoic geology, and in-situ stress measurements are used to infer contemporary extension between subplates of the western North American plate. Intraplate, northwest extension is accommodated by strike-slip and oblique normal faulting along present-day seismic zones. Cenozoic volcanism, facilitated by regional extension above a subducting plate, may have spread radially outward from the northern Great Basin to form a continental triple junction with the principal arms: the central Great Basin, the Snake River Plain and a southeast-trending zone of rhyolite domes in the southern Columbia Plateau. 相似文献
9.
从震前卫星热红外图像看中国现今构造应力场特征 总被引：3，自引：1，他引：2
震前卫星热红外探测现今地球热应力场, 既有水平应力热场, 也有垂直应力热场。热辐射能量的增强与应力增强有关。结合地震地表破裂带和地震等烈度线图的分析, 辅以GPS空间定位地形变测量、震源机制解和原地应力解除法,以及地球物理勘探资料, 可使对现今应力场的了解更加全面。以99?~104?E为界的过渡带包含中国大陆西部重庆荣昌双环、四川汶川椭圆。这种左右涡旋运动方式不同存在一个带内, 与深部构造差异和物质下曳运动有直接的关系。中国西部受印度板块和西北利亚板块SN向夹击, 来自西北利亚板块的作用力最南可到天山北麓。印度板块与太平洋板块相互扭动, 壳幔汁上涌差异反映在中国西部热旋扭椭圆为左旋扭动。印度板块与太平洋板块相互扭动, 中国东部地区出现伸展构造。NE、NNE向破裂发生右旋运动, 可称之新新华夏构造体系。壳幔汁上涌差异反映在东部热旋扭椭圆为右涡旋扭动。 相似文献
10.
闽台地球动力学及其能态结构研究 总被引：1，自引：0，他引：1
台湾地处中国大陆东南边缘是菲律宾海板块凸向亚欧大陆俯冲-碰撞异常岛弧带。福建位于台湾岛弧西侧活动地块。闽台独特的构造格架、地球动力学状态和构造应力场与地震活动之间的内在关联性,使之成为研究海陆板块俯冲-碰撞效应及其对板内地震活动影响天然地区。本文主要依据近30多年以来对福建地块的地震地质背景、地壳变形观测、构造应力场、地震活动性以及地壳-上地幔结构探测、地热场等资料,结合台湾学者详细对台湾岛弧地球动力学与强震构造等研究成果,探索海陆板块俯冲-碰撞地球动力学特征及其对板内活动地块影响,进而揭示板间-板缘-板内强震活动关联性和动力学性状的异同性。试图为本区强震预测和防震减灾对策提供新思路。 相似文献
11.
Ardeshir Dehmoobed Sharif-abadi Tim Grain Joseph 《Geotechnical and Geological Engineering》2010,28(4):471-481
Strain softening of oil sand under dynamic loading from large mining equipment inhibits the ability of the equipment to function
at optimal design performance. This paper looks at the findings of dynamic plate load tests, which effectively mimick the
loading and unloading action of a shovel track pad. A pseudo-elastic model was proposed based on the results of the dynamic
plate load testing to predict the deformation of oil sand under cyclic loading. Both field and laboratory cyclic plate load
tests were performed on oil sand materials. The field tests were performed with different plate sizes, or footprints. The
load was normalized based on the pressure stiffness concept in units of pressure per unit deformation. FLAC was used to model
the field plate load test deformation with the elastic concept. The laboratory tests were performed at room temperature with
more control on the load, loading rate, and cycles than possible during the field testing. Tests were conducted using a circular
plate of 14.9 cm diameter, at stress magnitudes of 200, 400, 500 and 600 kPa. The plate load tests were conducted for varying
loads, holding, and relaxation times of 0, 2, 5 and 10 min respectively for each magnitude of stress. The outcome of laboratory
plate load tests show that after frequent cycles, the pressure stiffness (ratio of stress to deformation) converges on a plateau
value of 8 kPa/mm. The proposed approach can be used to evaluate oil sands ground performance, enhancing the prediction process
for ground deformation under the operation of ultra-class mining equipment. 相似文献
12.
本文是1:400万“中国及邻近海域岩石圈动力学图”说明书的节要。它对我国现今活动着或在新生代活动过的地质和地球物理作用过程作了综合概括,重点是板内现象,并从板块构造作用基本过程上对它们加以解释。 中国的岩石圈很不均匀。其动力学涉及8个活动亚板块和有关的17个构造块体的性质、它们的相对运动和构造应力场、以及新构造变形的特征。阐明了我国岩石圈现今运动和变形 相似文献
13.
鄂尔多斯盆地东缘中—新生代构造特征及构造应力场分析 总被引：3，自引：0，他引：3
对鄂尔多斯盆地东缘黄河沿岸一带中—新生代构造特征的研究表明:盆地东缘中—新生代构造变形与印支运动、燕山运动、喜马拉雅运动密切相关。印支运动对东缘构造影响相对微弱,受扬子板块和华北板块碰撞的影响,区内形成了一套挤压应力近NS向的共轭节理。燕山运动对东缘的形成演化意义重大,其基本构造形态就是在这一时期形成的。受古太平洋板块与亚洲大陆俯冲产生的远程构造效应的影响,区内发育NE—NNE走向的褶皱带;离石断裂受到SE—SEE方向的挤压,以脆性变形为主;节理解析获得的燕山期构造应力场以NW—SE向挤压为特征。喜马拉雅运动期间,盆地东缘的挤压方向转变为NE—SW向,其动力主要来自印度板块向欧亚板块的碰撞及碰撞期后陆内俯冲所产生的远程效应。 相似文献
14.
胶南晚中生代大珠花岗岩岩体的脆性变形机制 总被引：1，自引：0，他引：1
在长期变化的构造应力作用下,胶南大珠山花岗岩岩体自早白垩世冷凝冷却以来发生强烈的脆性破裂变形,形成了多样的破裂类型如岩脉、节理和断层。在该岩体冷凝冷却早期侵入的细晶花岗岩脉和稍后形成的N-S向节理组反映出与同期区域构造应力场协调的N-S向挤压作用,而后伴随着揭顶剥蚀,出现了交替变化的构造应力场形成了岩体内主导的NW-NNW向和NE向节理组。整体上,恢复出的岩体内构造应力场发生顺时针方向旋转,最大水平挤压由早期的N-S向偏转为晚期的近E-W向。构造应力场的长期变化、平行节理作用和节理断层化作用造成了研究区复杂的破裂型式和破裂序列。 相似文献
15.
Anchor plate is a necessary component of the prestressed rock bolt, which plays a decisive role in actively resisting the rock mass deformation and improving the self-bearing capacity of the surrounding rock. In this paper, in order to investigate the effect of anchor plate on the mechanical behavior of prestressed rock bolt used in squeezing large deformation tunnel, a series of numerical, field and laboratory tests were performed. The mechanical characteristics of anchor plate with different shapes and sizes were systematically analyzed. Based on the Muzhailing Tunnel in Gansu Province, China, which is a typical deep-buried soft rock tunnel and suffered from serious squeezing large deformation disaster, the field verification was carried out. Meanwhile, the influences of spherical washer on the mechanical behavior of bolt shaft and anchor plate were also investigated. The result shows that the bowl-shaped plate has much better performance than the flat one, while the rounded bowl plate performs slightly better than the squared bowl plate. With the increase of plate thickness or plane size, the anchor plate has the better bearing capacity, while the stress transfer effect will be worse. Furthermore, the non-uniform deformation will gradually increase with the decrease of plate thickness or increase of plane size. Therefore, it is advised to increase the plate thickness rather than the plane size under the condition of better bearing capacity. The bending-induced stress of the anchor plate increases rapidly with the increase of the inclination angle between bolt shaft and anchor plate. Whereas the installation angle is unavoidable in practice, the spherical washer which has great effects on reducing the bending-induced stress could be a necessary component of the prestressed rock bolt system.
相似文献16.
Manabu Hashimoto 《Tectonophysics》1982,84(2-4)
It has been inferred from the focal mechanism of earthquakes and their hypocenter distribution (Shiono, 1977) that the stress field in southwestern Japan indicates complicated features; a NW-SE compression at shallow depths along the Nankai trough, an E-W or ESE-WNW compression in the inland crust, an extension parallel to the leading edge of the Philippine Sea plate at subcrustal depths in the region from the southern Chubu to northwestern Shikoku, and a down-dip tension beneath the Kyushu island.In order to investigate possible sources of these complex features of the stress state, a three-dimensional finite element method is employed to model the configuration of the subducting Philippine Sea plate, taking into consideration the following three possible types of forces:
- 1. (1) A negative buoyancy due to the density contrast between the subducting plate and the surrounding mantle.
- 2. (2) A northwestward compressive force generated by the movement of the Philippine Sea plate.
- 3. (3) A westward compressive force due to the movement of the Pacific plate.
17.
皖浙赣相邻区位于中国东南大陆边缘,中生代以来经历多期强烈构造作用,是研究中生代以来构造运动的理想区域。本文以皖浙赣相邻区中生代以来的脆性断层为研究对象,通过系统的野外构造观测和运动学研究,在区内划分出了4期主要断裂构造,确定了各期断裂的运动学特征,恢复了古构造应力场。第一期构造大致发生于早侏罗世-中侏罗世末,应力场为近南北向挤压,可能与华南板块与华北板块碰撞最后阶段的挤压作用相关,第二期构造出现在早白垩世,应力场为近北东-南西向挤压,可能与太平洋板块向南-南西俯冲有关,第三期构造大致发生在晚白垩世末,应力场为北西-南东向挤压,与太平洋板块向欧亚大陆的北西向正向俯冲有关,第四期构造应力场为东西向挤压,可能与太平洋板块弧后扩张产生的向西侧向挤压及印度板块俯冲碰撞产生的向东挤出共同作用有关。 相似文献
18.
We relocated over 1000 earthquakes of magnitude > 0.1 occurring between 1973 and 2001 in the Bering Glacier region of southern Alaska. We used first-motion data from these events to determine focal mechanisms and directly invert for stress orientations. Our results indicate that much of the seismicity in the region is occurring within the North American plate in a zone where an inferred structure, which lies beneath Bering Glacier, intersects the Chugach-St. Elias fault system. Stress-field analysis indicates that the events in the Bering Glacier surge reservoir region are likely occurring on northeast-trending thrust faults, consistent with previous modeling that suggested thrust faulting would be enhanced in regions of ice draw down. We also observe a stress field compatible with either high-angle normal or reverse faulting in regions located northwest of the Bering Glacier. This may indicate localized complexities in interactions between the Bering Glacier structure and the Chugach-St. Elias fault system. 相似文献
19.
20.
《Journal of Structural Geology》2001,23(2-3):407-419
During 1987, in situ stress measurements using two overcoring techniques (doorstopper and triaxial strain cell) were made in England and Scotland as part of the former SFB 108 Project ‘Stress and Stress Release in the Lithosphere’ at Karlsruhe University. The results for three of the test sites—Spittal in Caithness, Gartur in the Midland Valley of Scotland and at Burton in Cumbria—are reported. Complementary studies on cores from Gartur using portable ASR equipment are included. The maximum horizontal stress orientations agree closely with those seen in the general contemporary stress field in NW Europe. These results confirm that, in favourable circumstances, these shallow methods offer effective approaches to the acquisition of reliable contemporary stress information, whether derived from boreholes or rock cores. 相似文献