共查询到19条相似文献，搜索用时 218 毫秒
1.
《岩土力学》2010,(10)
高水平应力作用下,砂土等颗粒材料中的颗粒将发生破碎。一方面,颗粒破碎导致材料的颗粒分布曲线发生变化:材料中的粗颗粒含量减少,细颗粒含量增加;另一方面,颗粒的破碎引起了能量的转化。由能量守恒定律,作用过程中外力所做的功一部分由粒间摩擦力转化成热能,而另一部分则消耗到颗粒破碎过程中。利用表面物理学理论,颗粒破碎能可以表达为颗粒表面张力在颗粒破碎中所作的功。由此得到了一维压缩条件下颗粒破碎量与宏观压缩量之间的关系表达式。为了验证得到的关系式,开展了砂土的一维压缩试验,并进行了试验数据的整理分析。研究结果表明,所得关系表达式能较好地反映高水平应力作用下颗粒破碎对颗粒材料压缩性的影响。 相似文献
2.
高应力下颗粒材料一维力学特性研究(Ⅱ):蠕变性质 总被引：1，自引：0，他引：1
现场和试验观测表明,高应力下砂土的蠕变过程伴随着颗粒破碎现象。通过开展砂土的一维蠕变试验发现,试样的颗粒破碎量随时间增加而增加,且蠕变速率与颗粒破碎速率成正比。在此基础上,分析了蠕变过程中能量转化关系,利用表面物理学和分形几何学理论,得到了一维蠕变条件下颗粒破碎速率与宏观蠕变速率之间的关系表达式。研究结果表明,高应力一维蠕变条件下颗粒材料的宏观蠕变速率与颗粒破碎速率成正比。最后,对该研究采用的等效化方法进行了讨论。 相似文献
3.
颗粒破碎是粒状材料在高应力状态下的一种基本现象。为了研究冻结砂土中颗粒破碎对应力应变关系的影响,将冻结砂土视为复合颗粒材料,忽略冰的压融,考虑内摩擦角随应力状态的变化,构建一个适用于冻结砂土的考虑颗粒破碎的非线性本构模型。构建过程分为三步,首先是基于三轴剪切前后颗粒分析对冻结砂土颗粒破碎模式和产生机理进行探讨;其次是基于考虑颗粒破碎的能量平衡方程,对冻土在三轴剪切试验过程中的颗粒破碎耗能进行分析,结果表明颗粒破碎耗能随轴向应变呈双曲线变化趋势;最后应用考虑颗粒破碎的剪胀方程修正沈珠江三参数非线性模型中的体积切线模量νt,得到一个考虑颗粒破碎的非线性本构模型,模型参数可以通过单轴压缩试验和常规三轴试验确定。将原模型和修正后模型的计算结果与控制温度为-6℃,围压为1 MPa、4 MPa、6 MPa、8 MPa和10 MPa时冻结砂土的试验结果进行对比,结果表明该模型能够较好的模拟冻结砂土从低围压到高围压的应变软化特征与剪胀特征。 相似文献
4.
目前对钙质土压缩特性的研究主要集中在钙质细砂,而实际工程中广泛存在钙质粗粒料,因此对钙质粗粒料压缩特性开展研究具有重要意义。通过颗粒强度测定仪和全自动大型固结仪对钙质土进行了单颗粒破碎试验和一维压缩试验,研究了颗粒粒径和相对密度对钙质粗粒料的颗粒强度和压缩特性的影响。单颗粒试验结果表明,钙质砂单颗粒的特征应力随着颗粒相对密度的增大而增大;单颗粒的破碎强度具有明显的尺寸效应,可利用单颗粒的特征应力进行标准化,且服从Weibull分布。压缩试验结果表明,单一粒径试样破碎后的分形维数随颗粒粒径的增大而增大;试样的Hardin破碎率与塑性功的关系为幂函数关系;在本次试验条件下,单一粒径试样的屈服应力与单颗粒的特征应力存在近似线性关系。 相似文献
5.
利用南海钙质砂和阿拉伯湾钙质砂,进行侧限压缩试验,对其压缩特性进行分析,得到了相应的压缩指数;采用相对破碎率为度量指标,评价了钙质砂在压缩试验过程中的颗粒破碎情况。同时根据试验数据得到了不同初始相对密实度的砂样的塑性功,通过建立塑性功与相对破碎率以及塑性功与压缩指数之间的关系,探讨了颗粒破碎对钙质砂压缩特性的影响。研究显示,在本次试验条件下,颗粒破碎是导致钙质砂压缩变形的主要因素,钙质砂的中值粒径以及碳酸钙含量等因素对其颗粒破碎程度有明显影响;钙质砂的相对破碎率与其输入的塑性功有关,并且受到初始相对密实度的影响,采用相对密实度进行归一化后,两者呈现较好的幂函数关系;通过建立钙质砂压缩指数与塑性功之间的关系,进一步建立了钙质砂的压缩指数与相对破碎率之间的关系,经相对密实度归一化后,两者也呈现幂函数规律,此规律可以用于评价颗粒破碎对钙质砂压缩特性的影响。 相似文献
6.
颗粒破碎是影响砂土宏-微观力学性质的重要因素。采用改进型的可破碎颗粒生成方法,通过设置不同强度的平行黏结键模拟不同强度的可破碎颗粒,并借用基于离散元方法（DEM）的双轴压缩试验详细研究了可破碎性土在剪切过程中颗粒破碎率/平均破碎程度、微观尺度上的能量耗散分配机制、剪切破碎带形成以及断裂键各向异性的演化过程。结果表明,颗粒破碎强烈地影响砂土在宏观尺度上的力学响应、颗粒尺度上的能量分配机制以及剪切过程中的颗粒的组织结构演化。颗粒破碎主要影响小应变阶段各能量耗散元的分配机制,而在临界状态下剪切带内的颗粒摩擦以及破碎耗能是消耗外界功的主要因素。数值结果亦表明,颗粒的破碎伴随着整个剪切过程,但破碎率的增长速度却随着剪切应变的发展逐渐降低。另外,在剪切过程中,对于低破碎性土,在临界状态下剪切破碎带基本形成,带内的原有组织结构被打乱,断裂键的各向异性也随之弱化。 相似文献
7.
粒状材料被广泛地应用到土木工程的各个领域。大部分粒状材料在外力作用下较容易产生颗粒破碎,颗粒破碎对材料的力学性能有很大的影响。为了更好地描述易破碎粒状材料的力学特性,基于弹塑性力学和临界状态土力学开发了一种能够考虑颗粒破碎效应的本构模型。此本构模型能够考虑在剪应力和压应力作用下引起的颗粒破碎对粒状材料力学性能的影响。为了考虑颗粒破碎的影响,基于对Cambria 砂的高压试验,得出了临界状态线位置与消耗塑性功之间的关系,并称之为“破碎方程”。此本构模型拥有双屈服面,分别考虑剪切和等向压缩产生的塑性变形。通过试验结果与数值计算结果的对比得出,新的本构模型能较好地描述易破碎粒状材料的力学特性 相似文献
8.
粒状材料的强度与变形 总被引：2，自引：0，他引：2
颗粒破碎的特征表明,颗粒破碎具有分形特征,是影响粒状材料变形与强度的主要因素,根据颗粒破碎的分形模型可以建立粒状材料的变形与强度理论。假定粒状材料是均匀的D维分形体,由此导出粒状材料的抗张强度公式,并用来估算颗粒在给定压力下的破碎几率。颗粒破碎增加了单位体积颗粒的表面积,即颗粒的比表面能量增加,根据颗粒破碎过程中的能量守恒导出粒状材料一维压缩变形的表达式。 相似文献
9.
10.
废旧轮胎的治理是一个世界性的难题,而将废旧轮胎应用于岩土工程加固中则为其污染治理提供了一个行之有效的手段。为了进一步研究废旧轮胎对土体的加固机制并应用到实际工程中,主要选取了全风化花岗岩砂颗粒和加工后的废旧轮胎（包括颗粒型和长条型）的混合体作为研究对象,通过一系列不同竖向压力下的一维压缩试验,详细研究不同橡胶含量配比、不同形态下的橡胶-砂混合体的受压力学特性,并创新性地探讨了橡胶颗粒对砂颗粒在压缩过程中破碎行为的影响。试验结果表明,所有橡胶-砂混合体在较高压力作用下都能收敛到一条直线,即存在唯一的标准压缩线;随着橡胶含量增加到大于20%,混合物的压缩和卸载回弹量均明显增加,而这种特性不受轮胎颗粒形态的影响。此外,轮胎橡胶含量配比越高,砂颗粒的破碎程度越小,同时,当其中砂颗粒尺寸越小时,整体破碎越少。 相似文献
11.
The mechanical behavior of granular materials is characterized by strong nonlinearity and irreversibility. These properties have been differently described by a variety of constitutive models. To test any constitutive model, experimental data relative to the nature of the incremental stress–strain response of the material is desirable. However, this type of laboratory data is scarce because of being expensive and difficult to obtain. The discrete element method has been used several times as an alternative to obtain incremental responses of granular materials. Crushable grains add one extra source of irreversibility to granular materials. Crushability has been variously incorporated into different constitutive models. Again, it will be helpful to obtain incremental responses of crushable granular materials to test these models, but the experimental difficulties are increased. Making use of a recently introduced crushing model for discrete element simulation, this paper presents a new procedure to obtain incremental responses in discrete analogs of granular crushable materials. The parallel probe approach, previously used for uncrushable discrete analogs, is here extended to account for the presence of crushable grains. The contribution of grain crushing to the incremental irreversible strain is identified and separately measured. Robustness of the proposed method is examined in detail, paying particular attention to aspects such as dynamic instability or crushing localization. The proposed procedure is later applied to map incremental responses of a discrete analog of Fontainebleau sand on the triaxial plane. The effect of stress ratio and granular state on plastic flow characteristics is highlighted. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
12.
Whilst faulting in the shallow crust is inevitably associated with comminution of rocks, the mechanical properties of the comminuted granular materials themselves affect the slip behavior of faults. Therefore, the mechanical behavior of any fault progresses along an evolutionary path. We analyzed granular fault rocks from four faults, and deduced an evolutionary trend of fractal size frequency. Comminution of fault rocks starts at a fractal dimension close to 1.5 (2-D measurement), at which a given grain is supported by the maximum number of grains attainable and hence is at its strongest. As comminution proceeds, the fractal dimension increases, and hence comminution itself is a slip weakening mechanism. Under the appropriate conditions, comminuted granular materials may be fluidized during seismic slip events. In this paper, we develop a new method to identify the granular fault rocks that have experienced fluidization, where the detection probability of fragmented counterparts is a key parameter. This method was applied to four fault rock samples and a successful result was obtained. Knowledge from powder technology teaches us that the volume fraction of grains normalized by maximum volume fraction attainable is the most important parameter for dynamic properties of granular materials, and once granular fault materials are fluidized, the fault plane becomes nearly frictionless. A small decrease in the normalized volume fraction of grains from 1 is a necessary condition for the phase transition to fluidization from the deformation mechanism governed by grain friction and crushing by contact stresses. This condition can be realized only when shearing proceeds under unconstrained conditions, and this demands that the gap between fault walls is widened. Normal interface vibration proposed by Brune et al. [Tectonophysics 218 (1993) 59] appears to be the most appropriate cause of this, and we presented two lines of field evidence that support this mechanism to work in nature. 相似文献
13.
Fast shear behavior of granular materials in ring-shear tests and implications for rapid landslides 总被引：1，自引：0，他引：1
The high mobility of rapid landslides is one of the most important subjects of both theoretical and practical interest to engineers and scientists. The idea that ultralow resistance could explain the high mobility inspires researchers to examine the shear behavior of granular materials under a wide range of conditions, but the response of granular materials to fast loading rates is largely unknown. The motivation for this study was to examine several fundamental issues of particle properties and mechanical conditions on the fast shear behavior of granular materials. Two granular materials were studied in the oven-dried state and were sheared by employing a ring-shear apparatus. Results indicated that angular particles (silica sand) had higher shear strength parameters than spherical particles (glass beads). In addition, the dilative process was observed during shearing, which depended on normal stress and particle shape. A slightly negative shear-rate effect on shear strength was observed for both granular materials under a certain range of shear rates. Furthermore, cumulative shear displacement had a significant effect on the degree of particle crushing. Fast ring-shear tests also revealed that shear rate had a slightly negative effect on particle crushing. Based on these experimental results, the possible applications of dynamic grain fragmentation theory to assess the high mobility of rapid landsliding phenomena were discussed. It was indicated that the magnitude and release rate of elastic strain energy generated by grain fragmentation played important roles on the dynamic process of landslide mobility. 相似文献
14.
It is well known that the compressibility of crushable granular materials increases with the moisture content,due to the decrease of particle strength in a humid environment.An existing approach to take into account the effect of grain breakage in constitutive modeling consists in linking the evolution of the grain size distribution to the plastic work.But how the material humidity can affect this relationship is not clear,and experimental evidence is quite scarce.Based on compression tests on dry and saturated crushable sand recently reported by the present authors,a new non-linear relationship is proposed between the amount of particle breakage and the plastic work.The expression contains two parameters:(1)a material constant dependent on the grain characteristics and(2)a constant depending on the wetting condition(in this study,dry or saturated).A key finding is that the relationship does not depend on the stress path and,for a given wetting condition,only one set of parameters is necessary to reproduce the results of isotropic,oedometric,and triaxial compression tests.The relationship has been introduced into an elastoplastic constitutive model based on the critical state concept with a double yield surface for plastic sliding and compression.The breakage ratio is introduced into the expression of the elastic stiffness,the critical state line and the hardening compression pressure.Incremental stress-strain computations with the model allow the plastic work to be calculated and,therefore,the evolution of particle crushing can be predicted through the proposed non-linear relationship and reintroduced into the constitutive equations.Accurate predictions of the experimental results in terms of both stress-strain relationships and breakage ratio were obtained. 相似文献
15.
岩石颗粒破碎是影响粒状材料剪切强度和变形的最主要因素, 岩石颗粒破碎并不是想象的那么难, 像花岗岩颗粒有时在很小的压应力作用下就可以破碎。岩石单颗粒破碎的物理试验结果常常很离散, 完成大量单颗粒破碎的物理试验费时费力不现实, 采用离散单元法(Discrete element method, DEM)PFC软件模拟单颗粒压缩破碎试验, 既能克服单颗粒破碎物理试验的缺陷, 又能解决单颗粒破碎物理试验工作量大的难题, 是研究单颗粒破碎的理想选择。基于DEM的软件PFC2D, 将粒径为0.075～0.1245mm的基本粒子捆绑成不同粒径的单颗粒, 模拟岩石单颗粒压缩破碎试验, 观察颗粒破碎演化过程, 统计单颗粒破碎强度。计算单颗粒压缩破碎后颗粒分布的分维, 验证单颗粒破碎强度的分形模型和单颗粒破碎强度的尺寸效应。文中引用玄武岩单颗粒破碎试验结果, 与单颗粒破碎的离散单元模拟结果进行比较, 验证单颗粒破碎强度的尺寸效应和修正的Weibull理论的离散单元模拟结果。 相似文献
16.
17.
钙质砂是一种易破碎粒状材料。本文在分析颗粒破碎机理的基础上,提出了颗粒破碎与剪胀耦合作用的破碎功表示式,并用实验证明了相对破碎Br 与1,Wp,WB 之间的关系,从而建立了钙质砂颗粒破碎的评价指标及其能量公式。 相似文献
18.
“Sliding Surface Liquefaction” is a process causing strength loss and consequent rapid motion and long runout of certain landslides.
Using a new ring shear apparatus with a transparent shear-box and digital video camera system, shear-speed-controlled tests
were conducted on mixed grains (mixture of three different sizes of sand and gravel) and mixed beads to study shear behavior
and shear zone development process under the naturally drained condition in which pore pressure is allowed to dissipate through
the opened upper drainage valve during shearing. Higher excess pore water pressure and lower minimum apparent friction were
observed in the tests where grain crushing was more extensive under higher normal stress and higher shear speed. Along with
the diffusion of silty water generated by grain crushing, smaller particles were transported upward and downward from the
shear zone. Concentration of larger grains to the central and upper part of the shear zone was confirmed by means of visual
observation together with grain size analysis of sliced samples from several layers after the test. On the other hand, smaller
particles were accumulated mostly below the layer where larger grains were accumulated. The reason why larger grains were
accumulated into the shear zone may be interpreted as follows: grains under shearing are also subjected to vertical movement,
the penetration resistance of larger grains into a layer of moving particles is smaller than that into the static layer. Therefore,
larger grains tend to move into the layer of moving grains. At the same time, smaller particles can drop into the pores of
underlying larger grains downward due to gravity. 相似文献
19.
Yang Xiao Zengchun Sun Armin WStuedlein Chenggui Wang Zhijun Wu Zhichao Zhang 《地学前缘(英文版)》2020,(2):495-510
Crushing of grains can greatly influence the strength,dilatancy,and stress-strain relationship of rockfill materials.The critical state line(CSL)in the void ratio versus mean effective stress plane was extended to the breakage critical state plane(BCSP).A state void-ratio-pressure index that incorporated the effect of grain crushing was proposed according to the BCSP.Rowe’s stress-dilatancy equation was modified by adding the breakage voidratio-pressure index,which was also incorporated into the formulations of the bounding stress ratio and plastic modulus.A BCSP-based bounding surface plasticity model was proposed to describe the state-dependent stressstrain behaviors and the evolution of grain crushing during shearing process of rockfill materials,and was shown to sufficiently capture the breakage phenomenon. 相似文献