共查询到10条相似文献，搜索用时 203 毫秒
1.
2.
The rock deformation and failure tests are performed along various stress paths under true triaxial stress state.
The experimental results have shown that the change of three principal stresses (the increase of the maximum principal stress, the decrease of the minimum principal stress, the decrease of the confining pressure and the increase or decrease of the intermediate principal stress ) can lead to deformation and failure in rocks. The strength, the deformability and the failure precursors of rocks are related with stress paths.
Based on the results of the study, the problems of the stress path in rock engineering are discussed. 相似文献
3.
岩体变形和破坏的各种应力途径 总被引：18，自引：4，他引：14
在真三轴应力状态下进行了各种应力途径的岩石变形和破坏实验。实验表明,三个主应力的变化(最大主应力的增加,最小主应力的减小,围压的减小以及中间主应力的增加或减小)都能引起岩石变形和破坏。而且岩石的强度、延性和脆性、体积变化和破坏前兆等都与应力途径有关。据根试验结果探讨了岩体工程中的应力途径问题。 相似文献
4.
节理岩体渗流-应力耦合特性研究是岩石力学领域的重点和难点。水利水电工程与地下工程中天然节理岩体往往处于三向不等压应力状态,针对三向应力状态下节理岩体渗流-应力耦合特性研究较少。其中,单节理岩体渗流-应力耦合特性研究是基础。首先分析与探究了单节理岩体侧向应力作用效果及渗流作用机制,在单节理岩体渗透性-应力耦合分析模型基础上推导了单节理岩体渗流-应力耦合的理论公式。通过室内真三轴渗流-应力耦合试验,基于全局优化算法的非线性拟合及块体离散元数值仿真,验证了所提出理论公式的合理性。基于电路原理,给出了模拟电路与渗流问题的相似物理量,通过引入等效渗流阻方法,探究了典型的含正六边形主干节理网络的渗流-应力耦合特性。该研究结果对实际工程岩体的渗流分析有一定的参考价值。 相似文献
5.
针对自行研制的岩石空心圆柱扭剪仪可独立控制4个加载参数（轴力、扭力、内围压和外围压）的功能,通过数学和力学分析,系统地整理出几种易于实现且符合实际工程的应力路径及加载方式：在轴力与内围压满足一定关系的前提下,可以获取岩石的抗拉强度,提供一种新型测量岩石抗拉强度的方法;通过控制内外围压及轴力,可以进行常规三轴试验与真三轴试验,克服了现阶段岩石真三轴试验中试验装置复杂、试样加载面摩擦大的缺点;在轴力与内、外围压分别满足一定关系时,可以分别实现平均应力p不变与中主应力系数b不变的应力路径,用于研究应力主轴旋转对岩石力学性质的影响。上述应力路径的实现对岩石力学性质的研究以及现阶段岩石室内试验的发展具有重要意义。 相似文献
6.
地应力与岩体模量关系的理论及试验研究 总被引：1，自引：0，他引：1
岩体模量（弹性模量及变形模量）是工程岩体力学特性的基础参数之一,研究地应力状态与岩体模量之间的关系具有重要意义.基于静弹性热力学模型原理,结合弹性理论,推导了水平主应力与岩体性质参数的定量关系,并对地应力与岩体模量的关系进行了探讨.在此基础上,以赣龙铁路梅花山隧道为依托,开展了围岩应力及岩体模量参数的现场测试工作,并将实测成果与理论分析进行对比.结果表明：当埋深影响较小时,花岗岩中的水平主应力与岩体模量呈线性正相关关系;当埋深相差较大时,深度对地应力及岩体模量的影响均不可忽略,水平主应力与岩体模量一般呈非线性关系,需要进一步研究;对花岗岩中的岩体弹性模量和变形模量与水平主应力之间的相关性进行对比发现,岩体变形模量与水平主应力的相关性更好.研究成果可为工程岩体力学参数取值及评价提供借鉴. 相似文献
7.
三轴应力状态下盐岩强度分析探讨 总被引：1，自引：0，他引：1
通过分析盐岩在三轴应力状态下的变形,说明了较高围压下盐岩的大变形特性,提出了三轴应力状态下,利用轴向荷载除以试件初始横截面面积得到应力-应变关系存在的问题,据此对工程应变和对数应变进行了分析和对比,阐明了这两种应变的适用条件,并开展了不同围压下的试验测试和对试验结果对比分析。研究揭示了应利用对数应变分析盐岩的大变形特性和对变形后的应力进行修正,得到了盐岩的工程应变和对数应变均可表示为围压的线性函数,围压为20 MPa时的轴向压缩变形量是5 MPa时的3.09倍。围压越高,对数应变修正得到的最大轴向应力与不修正的差值越大,用对数应变修正后的轴向应力低于不修正的结果,围压达到20 MPa时,前者仅为后者的63.85%。 相似文献
8.
根据对防护工程、爆破工程、地震工程和其它高压、高速工作的研究需要,研制了一台岩石高压动力三轴仪。它可研究岩石或其它材料在三轴动、静力条件下的应力-应变关系。该三轴试验仪的特点是高压、高速,能使岩石试件在围压为0-1000MPa,轴压达0-4000MPa的条件下进行试验,快速加载只需4-9ms就可使荷载由零上升至峰值,应变速率达100s-1。本文介绍了三轴仪的主要结构,动加载原理,密封,高油压下的测量手段等,还介绍了用这台设备对各种岩石在各种应力条件下所进行的应力-应变关系、强度、变形、破坏、应变速率效应等试验的情况和所获得的试验数据。 相似文献
9.
A. D. Alexeev V. N. Revva N. A. Alyshev D. M. Zhitlyonok 《International Journal of Coal Geology》2004,58(4):245-250
Two generations of true triaxial loading (TTAL) apparatuses are presented. First generation apparatuses were intended primarily for true stress state imitation in rock or mineral specimens. Advanced second-generation installations are designed to provide precise measurements in any stress and simulation of rock outburst at sudden relief of one sample face. Both TTAL apparatuses can apply pressure up to 250 MPa corresponding to earth depth about 10,000 m independently along each of three axes. Experimental results are given on effect of absorbed water on ultimate state in coal as well as adsorbed methane influence on simulated coal outbursts. 相似文献
10.
SummaryRock Bursting Phenomena in a Superficial Rock Mass in Southern Central Sweden Rock bursting phenomena have been observed in connection with excavation of two shallow sited rock tunnels in the Forsmark area in southern, central Sweden. The tunnels are excavated in gneiss granite and the rock cover varies between 5–15 m. The stress release occurred locally in the tunnels which indicates significant variations in rock stresses.In situ measurements of the triaxial stress situation carried out in the area show values of the principal stresses in the horizontal plane of a magnitude in excess of 20 MPa in the superficial rock mass. The rock stress measurements indicate a clear correspondence of the directions of the highest compressive stress and the rock foliation. There is also a clear correspondence between the directions of a vertical and a horizontal joint set and the highest compressive stress. The three-dimensional stress tensor indicates that the horizontal fractures are exposed to the smallest closure pressure, i. e. the vertical stress, which set should therefore be most open. The horizontal joint set in the superficial rock mass has a significantly higher value of aperture than the vertical sets which may be a consequence of the stress situation in the rock mass. The rock bursting is not attributed to a breakage of the rock matrix, but merely to a propagation of already existing small fractures and potential fractures. The stress situation in the Forsmark area may be regarded as an uniaxial stress field in the horizontal plane.With 12 Figures 相似文献