共查询到17条相似文献，搜索用时 511 毫秒
1.
远震层析成像结果所揭示的华北板块东南向俯冲到扬子板块之下对于重新认识长江中下游地区成矿机制具有重要意义.利用来自中国地震台网中心，包括湖北、河南、安徽、江西、浙江、江苏等省级地震台网记录的波形数据对长江中下游地区深部结构进行了远震P波层析成像反演.综合研究结果显示，三叠纪华北与扬子板块俯冲碰撞，华北板块越过郯庐断裂带，向东南俯冲到扬子板块之下.推断板块碰撞的深部缝合线在郯庐断裂带以西位于大别造山带以南，在郯庐断裂带以东位于长江一线.经历后期的中生代构造转换过程，该带发生活化，成为中生代含矿岩浆和流体上升的通道，并形成著名的大型成矿带. 相似文献
2.
3.
苏鲁大别造山带岩石圈三维P波速度结构特征 总被引：13，自引：1，他引：13
本文全面收集整理并解析了地学断面、地震测深、体波和面波层析成像资料,得到了苏鲁大别造山带及其邻区岩石圈1°×1°三维P波速度数据体。研究结果表明,苏鲁与大别造山带高压、超高压变质带的岩石圈速度结构具有上地壳明显高速且上凸;中地壳增厚;下地壳埋藏较深且下凹等相似的基本特征。苏鲁和大别超高压变质带下的莫霍面比其周围深2～4 km,深度分别达到32～33 km和34～38 km。在大别造山带,有地壳低速体从南向北俯冲到上地幔的迹象,可能显示了扬子地块地壳物质向华北地块俯冲,坠入上地幔的残留体。超高压变质带岩石圈底部的地幔,往往有明显高速层或高速体存在。苏鲁与大别地区的岩石圈速度结构不同特征及其成因在于苏鲁地区上地壳P波速度更高,但是,下地壳下凹没有大别地区明显,而且区域构造较为均一。这可能是受到郯庐断层左行平移的主控影响所致。郯庐断裂带的上、中地壳和上地幔表现为相对低速异常,郯庐断裂及其地下延伸部分将岩石圈地幔浅部低速层和深部高速层切为两段,其影响深达岩石圈底部约90 km处。 相似文献
4.
苏鲁造山带南缘基础地质研究进展 总被引：3，自引：0，他引：3
苏鲁造山带南缘发育的超高压变质成因的榴辉岩带是整个中国中部造山带折返抬升最高部位，具有较典型的造山带根部特征。通过区域地质调查工作，查明区内发育岩石地层有新太古代至古元古代东海岩群、中新元古代锦屏岩群和云台岩群，呈一系列北东向和近东西向构造岩块分布，岩石中密集发育晋宁期韧性推覆剪切带和右形走滑韧性剪切带，后期普遍为印支期滑脱韧性剪切带叠加，形成复杂的韧性剪切系统，是阜宁期华北板块南缘地体拼贴B型俯冲碰撞作用、晋宁期华北板块与扬子板块软碰撞作用和印支期扬子板块向华北板块之下A型俯冲碰撞作用的结果。 相似文献
5.
浅变质岩在示踪大别—苏鲁造山带大陆板块俯冲与折返过程中的意义 总被引：3，自引：0，他引：3
中国大别-苏鲁造山带为大陆板块俯冲形成的碰撞造山带,该带北缘和内部产有原岩时代为新元古代-晚古生代的浅变质岩。这些浅变质岩对应于扬子板块北缘前寒武变质基底和扬子板块北缘古生代大陆架沉积物,形成过程于印支期扬子板块向北俯冲过程中的刮削作用密切相关,与大洋板块俯冲过程中刮削形成的加积楔具有类似的动力学过程。对大别-苏鲁造山带浅变质岩的深入研究,不仅有助于揭示大陆板块俯冲过程中高压-超高压岩石形成与折返过程,而且确定了扬子板块与华北板块之间的缝合线位置位于大别造山带北淮阳带的北部和苏鲁造山带的五莲-蓬莱群的北侧。 相似文献
6.
大别-苏鲁造山带的东延及板块缝合线:郯庐-鸭绿江-延吉断裂的厘定 总被引：9，自引：0，他引：9
根据大别-苏鲁造山带北缘和吉林-黑龙江东部的三叠纪浅变质加积杂岩特征标志,认为大别地区的板块缝合线为信阳-舒城断裂,苏鲁地区的为郯庐-鸭绿江断裂,且苏鲁造山带向北延入东北的吉林-黑龙江东部地区,而华北与扬子板块之间构造缝合线的东延部分则为郯庐-鸭绿江-图们江-延吉断裂。在此基础上,提出了亚洲东部三叠纪以来连续的俯冲-加积模型：(1)三叠纪扬子板块在华北板块向南突出部位(大别-苏鲁一带)发生点碰撞形成超高压变质岩,之后扬子板块由点碰撞逐渐向两侧旋转拼贴形成加积杂岩;(2)侏罗纪-新生代在三叠纪碰撞基础上,太平洋板块向欧亚大陆连续俯冲和加积,进而形成由三叠纪-新生代杂岩组成的欧亚大陆东部地区的巨大加积杂岩带。 相似文献
7.
郯庐断裂带晚中生代富碱侵入岩Nd、Sr、Pb同位素特征及源区性质探讨 总被引：2，自引：1，他引：1
郯庐断裂带是中国东部一条巨大的深大断裂带,它纵切华北克拉通、扬子克拉通、兴蒙-吉黑造山带和大别-苏鲁造山带四个大地构造单元,特别是在该断裂带出露许多晚中生代富碱侵入岩体,构成一条长达近2000km的富碱侵入岩带.本文是在前人研究基础上首次从大尺度对整个郯庐断裂带富碱侵入岩的Nd、Sr、Pb同位素做了比较系统深入的研究,发现四个大地构造单元的富碱侵入岩具有明显不同的Nd、Sr、Pb同位素特征,暗示四大构造单元富碱侵入岩的源区性质差别较大:兴蒙-吉黑造山带晚中生代富碱侵入岩源于和亏损地幔有成因联系的年青地壳(εNd(t)为ft.,平均值 2.25);华北克拉通、扬子克拉通和大别-苏鲁造山带三大构造单元晚中生代富碱侵入岩都主要源于EMI型富集地幔(εNd(t)均为负值).但是这三大构造单元岩石圈地幔富集程度差别较大.大别-苏鲁造山带岩石圈地幔相对富集程度最高(εNd(t)平均值为-17.06);华北克拉通次之(εNd(t)平均值为-10.03);扬子克拉通岩石圈地幔富集程度最低(εNd(t)平均值为-6.41).本文认为大别.苏鲁造山带岩石圈地幔相对最富集的原因可能是在早中生代扬子克拉通陆壳向华北克拉通深俯冲之后的折返过程中,因压力释放有利于熔/流体的形成、析出和向上交代并改造华北岩石圈地幔使之成为富集地幔. 相似文献
8.
大别造山带在地球化学分区上属于扬子大板块还是华北大板块一直存在争议。近年来，一些学者根据其显生宙矿石铅和花岗岩长石铅（揭示地壳铅）具有低铅同位素成分特征，将大别造山带整体划归华北大板块。本文对大别造山带南部（黄陂、新洲、大悟地区）、腹地（麻城地区）和扬子陆块北缘（黄石地区）晚中生代碱性玄武岩铅同位素组成（揭示地幔铅）研究表明，大别造山带具有高放射性成因铅同位素特征，与扬子铅同位素省中南扬子亚省基本一致。扬子陆块北缘（黄石地区）晚中生代碱性玄武岩铅同位素组成与扬子铅同位素省中北扬子亚省基本一致。铅同位素组成特征和Th-U-Pb体系变异趋势均表明：（1）大别造山带晚中生代地幔属于扬子地幔，与华北地幔存在明显区别；（2）大别造山带壳、幔铅同位素成分上存在明显的非耦合特征，反映大别造山带壳幔演化历史的复杂性。 相似文献
9.
中国东部地区深部结构的层析成像 总被引：3，自引：0，他引：3
利用中国国家台网60个宽频带地震台站和国际地震中心(ISC)592个台站分别记录的1996—2007和1990—2004的震相报告,从中提取出可供反演使用的远震事件9806个,共12078个高质量的P波初至走时数据,对中国东部地区进行了远震P波层析成像研究。结果显示,在五大连池火山区和大同火山区有明显的低速异常,大同火山源区较深。另外几个明显的低速区分别分布在广东地区、渤海湾地区和长江中下游地区。四川盆地的高速特征和扬子板块的低速特征在纵剖面图像上也较为明显。中国东南部的软流圈中存在大面积的地幔上涌,认为是由板块之间的碰撞俯冲、引起大尺度地幔横向流动造成的,而太平洋板块的作用局限于其俯冲的"远程效应",为大范围的软流圈物质上涌提供了东侧的深部动力条件。 相似文献
10.
大别-苏鲁造山带是扬子陆块与华北陆块之间在三叠纪时期俯冲碰撞所形成的超高压变质带. 相似文献
11.
上地幔三维S波速度结构与大别苏鲁超高压变质带俯冲折返机制探讨 总被引：14，自引：2，他引：12
本文分析了中国东部的上地幔剪切波速度结构及其与超高压变质岩带之间关系的构造意义。结果表明,在华北块体下面150km深处的速度高于扬子块体的速度值。大别-苏鲁造山构造带下面存在着一条地震波速度变化带。苏鲁、山东半岛下面的速度分布与大别造山带下面的速度分布处于同一个速度等值区域上。横跨大别造山带的南北走向速度结构剖面上,在100km以上的地壳和上地幔区域,华北块体下与扬子块体下面的速度均略低平均值。100km以下,大别造山带南北两侧的扬子与华北块体下面的速度结构分布形态大相径庭。华北下面的波速高于扬子块体下面的波速。大别造山带下呈现速度异常,界线的南侧,有一个略低于零速度的负波速异常区,呈现由南向华北块体的下方斜冲形态,下冲角度大约为30°,其先端部位下冲深达300多公里,其外围零速度等值线的分布区,斜向下延伸超过400km。在速度结构变化分界线的北侧,一个零速度值的分布区带,呈现出从由100多公里深处从北向南朝地表面斜上冲形态。这些速度结构成像的几何形态可能意味着200Ma前大别超高压变质岩带的形成与演化的俯冲、折返的构造运动在上地幔和岩石圈中留下的“痕迹”。 相似文献
12.
三维P波速度解析研究结果表明，苏鲁-大别超高压变质带岩石圈地壳速度结构均具有上地壳明显高速且上凸、中地壳增厚、下地壳埋藏较深且莫霍面下凹等基本特征。与大别地区相比较，苏鲁超高压变质带存在着上地壳波速更高，且地表高速区面积与上地壳高速体体积大于大别；而莫霍面下凹程度不如大别地区，地壳山根已逐步趋向消失等独特的区域特征。显示了苏鲁地区曾发生过更激烈的俯冲与折返构造运动，与大别地区相比，有更多高速、高密度的超高压变质岩折返到上地壳与地表；然而在造山运动过程中比大别更早进入了造山运动后期等特征。对比研究结果表明，苏鲁-大别地段的造山、演化过程中，在构造运动基本相似的背景下，存在着区域性特征。苏鲁地区的造山运动以及超高压变质作用，有起始略晚、发生时期较短但相对激烈、结束早、比大别更早进入了造山运动的后期等特征。笔者分析了苏鲁区域性特征形成的主要构造原因是，郯庐断裂带的大规模左旋走滑运动以及通过中国华北区域的大范围NXV—SE向扩张应力场的影响。其中，中生代以来大华北地区的大区域扩张应力场的影响可能是该区俯冲到地幔内的超高压变质岩能够大量折返回地表或上地壳的重要构造原因。 相似文献
13.
ZHENG Hongwei LI Tingdong HE Rizheng YANG Hui NIU Xiao ZOU Changqiao 《《地质学报》英文版》2020,94(4):1159-1166
To better understand the lithosphere mantle collision tectonics between the India plate and Asia plate, we determine three dimensional P wave velocity structure beneath western Tibet using 27,439 arrival times from 2,174 teleseismic events recorded by 182 stations of Hi-CLIMB Project and 16 stations in the north of Hi-CLMB. Our tomographic images show the velocity structure significantly difference beneath northern and southern Qiangtang, which can further prove that the Longmu Co-Shuanghu ophiolitic belt is a significant tectonic boundary fault zone. There are two prominent high velocity anomalies and two prominent low velocity anomalies in our images. One obvious high velocity anomalies subduct beneath the Tibet at the long distance near 34°N, whereas it is broke off by an obvious low velocity anomaly under the IYS. We interpret them as northward subducting Indian lithosphere mantle and the low velocity anomanly under IYS likely reflects mantle material upwelling triggered by tearing of the northward subduction Indian lithosphere. The other prominent high velocity anomaly was imaged at a depth from 50 km to 200 km horizontal and up to the northern Qiangtang with its southern edge extending to about 34°N through Hoh Xil block. We infer it as the southward subducting Asia lithosphere mantle. The other widely low velocity anomaly beneath the Qiangtang block lies in the gap between the frontier of India plate and Asia plate, where is the channel of mantle material upwelling. 相似文献
14.
The largest ultra-high pressure metamorphic (UHPM) belt in the world is located along the Dabie–Sulu region, which tectonically belongs to the east part of the central orogenic belt of China. Integrated geophysical investigations of using deep seismic reflection, MT, and geothermal observations have been carried out in the Sulu area since 1997. The results of integrated interpretation suggest the existence of three features: (1) a rift beneath the Lianshui basin by the Jiashan–Xionshui fault; (2) a special crustal pattern, called the magmatic multi-arch structure occurs beneath the northern Sulu UHPM zone; and (3) a northwest-dipping regional thrust crosses the Sulu crust, representing the intracontinental subduction of the Yangtze craton beneath the Sulu metamorphic belts after collision between the Yangtze and Sino-Korean cratons. A magmatic multi-arch structure consists of some arched reflectors that occur in both the lower and the upper crust where arched reflectors coincide with granitoid plutons. The multi-arch structures are common in eastern China where many Mesozoic granitoid plutons of different scales occur. The crustal structures in the Sulu metamorphic belts resulted from intensive dynamic processes following the Triassic collision between the Yangtze and Sino-Korean cratons. The formation and exhumation of UHPM rocks followed the collision, and then intracontinental subduction of the Yangtze craton beneath the Dabie–Sulu terranes took place in the early and middle Jurassic. In the late Jurassic, the Sulu lithosphere turned to an extensional regime, large-scale granitic intrusions occurred in eastern China; these likely resulted from lithospheric thinning and asthenospheric uplifting. The granitic intrusions came to a climax during the Cretaceous and were followed by rifting along existing faults in the early Eogene, resulting in many petroleum basins. The granitoid emplacement that generated the magmatic multi-arch structure and the rift were consequences of the lithospheric thinning process, and deep intracontinental subduction of the Yangtze craton beneath the Sulu metamorphic belt might partially contribute to the lithospheric thinning. 相似文献
15.
大别造山带地壳泊松比结构与超高压变质带—来自宽角反射与近垂直反射剖面的启示 总被引：3，自引：0，他引：3
综合宽角反射、近垂直反射的探测结果和有关地质资料，对大别造山带地壳结构和超高压变质带研究显示：大别造山带地壳具有层块结构特征。沿安义－庄墓剖面，上地壳有7个弹性块体，中地壳有5个，下地壳有4个。扬子与华北地块的主缝合带是超高压变质带，扬子地块与大别造山带的现今分界线是与郯庐断裂相交的太湖－马庙断裂，磨子潭－晓天断裂是大别造山带的北界，北淮阳构造带呈楔状向下插入，它与华北地块的分界是肥中断裂。郯庐断裂在中、上地壳近于直立，下地壳向西倾斜。超高压变质带的厚度为5－7km，产状向北插入到北大别块体之下，折返过程是构造就位，不是大别山的均匀抬升，折返的主运动面是水吼－五河高温剪切带。 相似文献
16.
《Gondwana Research》2013,24(4):1402-1428
The formation of collisional orogens is a prominent feature in convergent plate margins. It is generally a complex process involving multistage tectonism of compression and extension due to continental subduction and collision. The Paleozoic convergence between the South China Block (SCB) and the North China Block (NCB) is associated with a series of tectonic processes such as oceanic subduction, terrane accretion and continental collision, resulting in the Qinling–Tongbai–Hong'an–Dabie–Sulu orogenic belt. While the arc–continent collision orogeny is significant during the Paleozoic in the Qinling–Tongbai–Hong'an orogens of central China, the continent–continent collision orogeny is prominent during the early Mesozoic in the Dabie–Sulu orogens of east-central China. This article presents an overview of regional geology, geochronology and geochemistry for the composite orogenic belt. The Qinling–Tongbai–Hong'an orogens exhibit the early Paleozoic HP–UHP metamorphism, the Carboniferous HP metamorphism and the Paleozoic arc-type magmatism, but the three tectonothermal events are absent in the Dabie–Sulu orogens. The Triassic UHP metamorphism is prominent in the Dabie–Sulu orogens, but it is absent in the Qinling–Tongbai orogens. The Hong'an orogen records both the HP and UHP metamorphism of Triassic age, and collided continental margins contain both the juvenile and ancient crustal rocks. So do in the Qinling and Tongbai orogens. In contrast, only ancient crustal rocks were involved in the UHP metamorphism in the Dabie–Sulu orogenic belt, without involvement of the juvenile arc crust. On the other hand, the deformed and low-grade metamorphosed accretionary wedge was developed on the passive continental margin during subduction in the late Permian to early Triassic along the northern margin of the Dabie–Sulu orogenic belt, and it was developed on the passive oceanic margin during subduction in the early Paleozoic along the northern margin of the Qinling orogen.Three episodes of arc–continent collision are suggested to occur during the Paleozoic continental convergence between the SCB and NCB. The first episode of arc–continent collision is caused by northward subduction of the North Qinling unit beneath the Erlangping unit, resulting in UHP metamorphism at ca. 480–490 Ma and the accretion of the North Qinling unit to the NCB. The second episode of arc–continent collision is caused by northward subduction of the Prototethyan oceanic crust beneath an Andes-type continental arc, leading to granulite-facies metamorphism at ca. 420–430 Ma and the accretion of the Shangdan arc terrane to the NCB and reworking of the North Qinling, Erlangping and Kuanping units. The third episode of arc–continent collision is caused by northward subduction of the Paleotethyan oceanic crust, resulting in the HP eclogite-facies metamorphism at ca. 310 Ma in the Hong'an orogen and low-P metamorphism in the Qinling–Tongbai orogens as well as crustal accretion to the NCB. The closure of backarc basins is also associated with the arc–continent collision processes, with the possible cause for granulite-facies metamorphism. The massive continental subduction of the SCB beneath the NCB took place in the Triassic with the final continent–continent collision and UHP metamorphism at ca. 225–240 Ma. Therefore, the Qinling–Tongbai–Hong'an–Dabie–Sulu orogenic belt records the development of plate tectonics from oceanic subduction and arc-type magmatism to arc–continent and continent–continent collision. 相似文献
17.
High‐ to ultrahigh‐pressure (HP‐UHP) metamorphic rocks that resulted from deep continental subduction and subsequent exhumation in the Sulu orogenic belt, China, have experienced multiphase deformation and metamorphic overprint during its long journey to the mantle and return to the surface. HP‐UHP shear zones are strain‐localized weak zones on which the UHP slab is transported over long distances. HP‐UHP shear zones are well exposed along a 200‐km belt in the Sulu UHP metamorphic belt. The shear zones lie structurally below the UHP rocks and above the non‐UHP rocks, suggesting the early exhumation of the UHP rocks by thrusting. The large area distribution, HP‐UHP nature, high strain and structural association of the shear zones with the UHP rocks suggest that the shear zones are probably a regional detachment developed during the early stage of exhumation of the UHP rocks. Kinematic indicators suggest top‐to‐the N–NW motion of the UHP slab during the exhumation, which, combined with isotope signature in Mesozoic igneous rocks, leads us to the interpretation that the subduction polarity is the North China plate down to the south rather than the Yangtze plate down to the north in the Sulu region. 相似文献