共查询到20条相似文献，搜索用时 296 毫秒
1.
More recent public discourse has taken place regarding the potential correlation between seismic activity and hydraulic fracturing in shale gas reservoirs. Public fears about the risk of seismicity stem mainly from past earthquakes induced by conventional deep injections because the two types of projects share similar mechanisms of rock failure and fault activation. Although previous earthquake risks associated with fluid injection were not serious, the situation would be far more problematic if hydraulic fracturing in a shale gas reservoir triggered a similar-sized earthquake due to potential environmental issues. In fact, almost all documented injection-induced earthquakes have been associated with long-duration and high-volume injection rather than short-term (hours) pressurization (e.g., hydraulic fracturing). In general, hydraulic fracturing operations mostly induce microseismic events through rock failure and activation of small fractures. Although shale reservoirs in tectonically active zones pose a high risk of inducing large-magnitude seismic activities, the internal geological conditions and external stimulation conditions are impossible to be satisfied simultaneously to trigger activation of an entire fault and to result in a destructive earthquake during hydraulic fracturing operations. 相似文献
2.
发展清洁、稳定、可再生的干热岩型地热资源对于缓解能源危机、减轻环境污染、改善人类健康具有重要意义。增强型地热系统(Enhanced Geothermal System,EGS) 是一项改造干热岩天然储层,高效开发地热能资源的先进技术。以澳大利亚库珀盆地地热储层为研究对象,基于水力压裂实测微震数据,建立了三维分区均质渗透率模型和非均质渗透率模型,分别进行储层温度场、流场及采热性能变化的研究,并对比其差异。结果表明:在同样的注采流量下,由于非均质模型中微震事件集中于井口附近,进而形成明显的优势流动通道,流体从注入井更快流向生产井,温度下降速度相对更快,分区均质模型中优势流动通道没有非均质模型明显,温度下降速度较慢;地热模型运行期间分区均质模型的采热量变化相对稳定,降幅为3.74%,非均质模型采热量降幅较大,为12.72%。分区均质模型的模拟结果相比于非均质模型,温度下降幅度小、采热量高;但实际储层中的渗透率分布不均,分区均质模型的模拟采热量相比实际采热量偏高,因此在实际应用中,非均质模型的模拟结果对实际工程更具参考意义。 相似文献
3.
In order to determine the rock mechanics characteristics, a uniaxial compression experiment for the hard sandstone in the 6305 working face of Jining No.3 Coal Mine was designed. The experimental results show that the bending energy is weakly impacted and the bending energy index is 66 kJ. To crack into the hard roof to prevent roof formation of rock burst with the Polish hydraulic fracturing technology. According to on-site hydraulic fracturing test, hydraulic fracturing radius of 6305 working face can reach 5–15 m. Finally, there is a little vibration, and energy is mainly concentrated range from 1000 to 10,000 J from the characteristics of mine waveform and spectrum distribution through microseismic monitoring system during the fracturing process. It shows that some microseismic events induced by hard roof after hydraulic fracturing have achieved the purpose of slow relief of hard roof and prevent the occurrence of rock burst. 相似文献
4.
增强型地热系统（EGS）是在干热岩技术基础上提出来的一个清洁能源概念,水力压裂建立人工热储是开采地下干热岩热能的有效方法之一。利用TOUGH2系列软件对增强型地热系统进行模拟,具体介绍了对水压致裂过程中裂隙网络模拟的处理方法。裂隙中的水流可以采用不同的概念模型,最为常见的模型包括双空隙率、双渗透率、多重相互作用连续统一体（MINC）以及有效连续统一体（ECM）,这些模型明确了对离散的裂隙和基质的模拟方法。应根据基质的渗透性和裂隙的性质灵活地选择裂隙处理方法,也可将不同方法结合起来使用。提出了几种有效的混合模拟方案,对将来高温岩体地热开发具有重要意义。 相似文献
5.
地热能作为一种清洁低碳、稳定连续的非碳基能源,可为实现碳中和、碳达峰目标提供重要保障.通过回顾国内外干热岩和增强型地热系统的开发现状,储层改造建造技术现状和近期发展,微地震监测技术发展和诱发地震灾害评估方法进展,示踪技术进步和电磁法的监测潜力,展望干热岩和增强型地热系统增产技术发展前景和研究开发方向,为相关的工程技术和研究人员提供参考. 相似文献
6.
干热岩(HDR)是指不含或仅含少量流体,温度高于180 ℃,其热能在当前技术经济条件下可以利用的岩体。作为一种重要的非常规地热资源,干热岩的开发利用可以借鉴页岩油气的成功经验,采用相似的技术发展路径,找到“地热甜点”,开发出低成本且高效的钻完井技术,逐步形成和完善技术体系,建立与对象相适应的生产运行模式,以期实现对这种巨大资源的有效开发利用。增强型地热系统(EGS)被认为是干热岩资源开采的一种重要方式。EGS最初被称为工程型地热系统,后来才统称为增强型地热系统,是指通过实施特殊的工程工艺,改善地层储集性能或(和)向地层中注入流体,以实现对地热资源的有效开发。其基本方法原理为在干热岩体内钻两口或多口井,将低温流体通过注入井注入干热岩体的天然裂缝系统,或注入通过压裂技术在钻井之间建立的具有水力联系的人工裂缝中加热,通过吸收干热岩内所蕴含的热能,将流体温度提高到一定程度后从生产井采出至地表或近地表进行利用,形成人工热交换系统,用于发电或取暖等。采用EGS技术开发干热岩地热资源,选区选址恰当与否是能否取得成功的最关键环节之一。中深层地热资源可分为水热型和干热岩型两大类、五亚类。其中,干热岩根据其热储孔渗条件差异又可分为无水优储、无水差储和无水无储三亚类,适合作为EGS开发对象的干热岩资源为其中的无水优储和无水差储两种类型。五类地热资源规模呈金字塔形,开发技术难度逐渐增加。基于由热储埋深、热储温度、热储岩性、热储物性、盖层厚度、盖层断裂发育条件等组成的地质资源条件,由钻探成井技术、储层改造技术、管理运营技术组成的工程技术条件,以及由地热需求和资源经济性组成的经济市场条件三个因素,本文建立了三因素分析与多层次指标分解法相结合的干热岩EGS选区评价方法和关键指标,在国内干热岩资源条件较好的17个候选区中,优选出西藏羊八井高温地热区和渤海湾盆地济阳坳陷潜山分布带作为EGS试验有利区。 相似文献
7.
将S变换时频分析技术引入微震信号波形分析领域,通过震源破裂尺度,研究微震信号频率特征与岩体变形破坏之间的联系。以西南地区3个水电工程作为研究对象,将大量微震监测数据作为统计样本以减小外部因素对参数计算的影响。在该基础上统计、分析岩体破裂尺度与微震信号频率之间的关系,结合大渡河猴子岩水电站地下厂房微震与多点位移计监测资料进行工程实证研究。研究结果表明,当岩体破裂尺度增大时微震信号高频成分减少,表现出低频特征;在围岩变形过程中微震信号高频成分呈现出先减少再增加的演化规律,围岩发生明显变形前微震信号出现由高频向低频转移的现象,因此,可将聚集区域内微震信号频率降低作为该区域岩体宏观变形破坏的前兆信息。研究结果可为基于微震监测的岩体工程稳定性分析及其灾害预测预报提供参考。 相似文献
8.
地热能赋存于地球内部岩土体、流体和岩浆体中,是一种永久的、可再生的、储量丰富的清洁能源。地热能的开发,尤其是干热岩的开发利用,有可能成为解决人类未来能源危机的重要途径。目前采用的干热岩开采方法被称为增强型地热系统(EGS)。热储地质环境的复杂性和水力化措施对天然裂隙的依赖性,造成多数的EGS项目存在热储体积和换热面积不足、工质流量小、终端温度低,以及诱发地震风险等局限性,致使干热岩开发始终未能大规模商业化。基于开挖的增强型地热系统(EGS-E)的提出为突破传统EGS的技术弊端和规模局限提供了新思路。文章在其概念模型的基础上,从系统原理、工程构想、技术优势等方面对EGS-E进行了更详尽的阐述。EGS-E采用开挖、爆破、崩落等采矿技术,形成了独特的热储致裂系统和热能交换系统,能够大幅度降低地质环境对热储质量的限制,具备构建定制的热储空间、形成充足的换热面积,维持稳定的工质流量与温度及减少诱发地震风险等优势,为干热岩开发的商业化提供了新的解决方案。 相似文献
9.
水力压裂是青海共和盆地干热岩地热资源开发的难点技术问题之一。本文基于升级改造的大尺寸真三轴水力压裂物理模拟实验系统模拟干热岩储层高温高压环境,利用青海共和盆地露头岩心进行水力压裂物理模拟实验,揭示干热岩储层水力裂缝的起裂和扩展规律。通过物理模拟实验发现：干热岩储层裂缝起裂可以通过文中提出的起裂模型判断起裂方式和预测起裂压力;水力裂缝在岩石基质中的扩展形态简单,仅沿最大主应力方向延伸;但是水力裂缝会受到岩石中弱面的影响,发生转向沿弱面延伸,形成较复杂的裂缝形态。因此,建议在干热岩储层实际施工中,在天然裂缝发育较丰富的层段开展水力压裂,以实现复杂裂缝网络提取地热能。 相似文献
10.
A discrete element model to link the microseismic energies recorded in caprock to geomechanics 总被引：1，自引：0，他引：1
A discrete element model is presented to study slip-induced microseismic events along weak planes and crack-induced microseismic events within the intact rock for a representative elementary volume, REV, in the caprock of Weyburn reservoir. Also, the effect of varying factors such as orientation, coefficient of friction and elasticity of the weak plane on release of microseismic energies is studied. According to the results, for the conditions studied in this paper, the magnitudes of slip-induced events range from ~?1 to ?6, while crack-induced events range from ~?7 to ?11. Considering the capability of geophones, this suggests that events “recorded” in the caprock are more likely to have slip origins along weak planes than having crack origins within the intact rock. In order to show the applicability of the model in practice, the events recorded in the caprock of Weyburn from September to November of 2010 are analyzed. Also, a simple model is presented that correlates the amount of consumed energy per volume of the REV with the seismic energy released due to stick–slips along a weak plane. The results show that weak planes can be emissive even long before the failure of their surrounding is reached, and therefore, there can be a level of tolerance for the observed microseismic events in the caprock. 相似文献
11.
The Enhanced Geothermal System (EGS) is an artificial geothermal system that aims to economically extract heat from hot dry rock (HDR) through the creation of an artificial geothermal reservoir. Chemical stimulation is thought to be an effective method to create fracture networks and open existing fractures in hot dry rocks by injecting chemical agents into the reservoir to dissolve the minerals. Granite is a common type of hot dry rock. In this paper, a series of chemical stimulation experiments were implemented using acid and alkaline agents under high temperature and pressure conditions that mimic the environment of formation. Granite rock samples used in the experiments are collected from the potential EGS reservoir in the Matouying area, Hebei, China. Laboratory experimental results show that the corrosion ratio per unit area of rock is 3.2% in static acid chemical experiments and 0.51% in static alkaline chemical experiments. The permeability of the core is increased by 1.62 times in dynamic acid chemical experiments and 2.45 times in dynamic alkaline chemical experiments. A scanning electron microscope analysis of the core illustrates that secondary minerals, such as chlorite, spherical silica, and montmorillonite, were formed, due to acid-rock interaction with plagioclase being precipitated by alkaline-rock interactions. Masking agents in alkaline chemical agents can slightly reduce the degree of plagioclase formation. A chemical simulation model was built using TOUGHREACT, the mineral dissolution and associated ion concentration variation being reproduced by this reactive transport model. 相似文献
12.
We use a continuum model of reservoir evolution to explore the interaction of coupled thermal, hydraulic and chemical processes that influence the evolution of seismicity within a fractured reservoir from stimulation to production. Events occur from energy release on seeded fractures enabling moment magnitude, frequency and spatial distribution to be determined with time. Event magnitudes vary in the range ?2 to +2 with the largest event size (~2) corresponding to the largest fracture size (~500 m) and a prescribed stress drop of 9 MPa. Modelled b‐values (~0.6–0.7) also correspond to observations (~0.7–0.8) for response in the Cooper Basin (Australia). We track the hydrodynamic and thermal fronts to define causality in the triggering of seismicity. The hydrodynamic front moves twice as fast as the thermal front and envelops the triggered seismicity at early time (days to month) – with higher flow rates correlating with larger magnitude events. For later time (month to years), thermal drawdown and potentially chemical influences principally trigger the seismicity, but result in a reduction in both the number of events and their magnitudes. 相似文献
13.
The paper shows thermal tests results (thermal conductivity, specific heat) carried out during the research project to recognize the potential of hot dry rocks for heat and electricity production in Poland. Analysis of such parameters of the rock medium has fundamental significance in search of structures for location of enhanced geothermal systems (EGS). Analyses of thermal conductivity as well as specific heat determine the possibility of effective extraction of heat from hot rock formations and its efficient transfer to the land surface. Reservoir rock should be characterized by the lowest possible porosity and permeability, and the highest possible thermal conductivity. In order to recognize reservoir parameters of rocks that form potential reservoirs for EGS, 300 samples of sedimentary rocks were taken from 11 wells located in central Poland. For samples, sizes of which enabled measurement of thermal parameters, tests of thermal conductivity and specific heat were carried out. Independently, measurements of porosity were made. The porosity magnitude determines values of measured thermal parameters. Measurements of thermal conductivity of rocks were made for 24 samples collected from Triassic, Permian and Carboniferous deposits in six wells. Measurements of specific heat on rock samples were made for 20 rock samples. Among sedimentary rocks, principally sandstones and limestones with reservoir parameters favourable for this type of systems are considered to be petrogeothermal reservoirs and are often characterized by favourable thermal parameters for EGS. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
14.
Moment tensors and micromechanical models 总被引：4，自引：0，他引：4
A numerical modelling approach that simulates cracking and failure in rock and the associated seismicity is presented and a technique is described for quantifying the seismic source mechanisms of the modelled events. The modelling approach represents rock as an assemblage of circular particles bonded together at points of contact. The connecting bonds can break under applied stress forming cracks and fractures in the modelled rock. If numerical damping is set to reproduce realistic levels of attenuation, then energy is released when the bonds break and seismic source information can be obtained as damage occurs. A technique is described by which moment tensors and moment magnitudes can be calculated for these simulated seismic events. The technique basically involves integrating around the source and summing the components of force change at the surrounding particle contacts to obtain the elements of the moment tensor matrix. The moment magnitude is then calculated from the eigenvalues of the moment tensor. The modelling approach is tested by simulating a well-controlled experiment in which a tunnel is excavated in highly stressed granite while microseismicity is recorded. The seismicity produced by the model is compared to the actual recorded seismicity underground. The model reproduces the spatial and temporal distribution of seismicity observed around the tunnel and also the magnitudes of the events. A direct comparison between the actual and simulated moment tensors is not performed due to the two-dimensional nature of the model, however, qualitative comparisons are presented and it is shown that the model produces intuitively realistic source mechanisms. The ability to obtain seismic source information from the models provides a unique means for model validation through comparison with actual recorded seismicity. Once it is established that the model is performing in a realistic manner, it can then be used to examine the micromechanics of cracking, failure and the associated seismicity and to help resolve the non-uniqueness of the geophysical interpretation. This is demonstrated by examining in detail the mechanics of one of the modelled seismic events by observation of the time dependence of the moment tensor and by direct examination of the particle motions at the simulated source. 相似文献
15.
增强型地热系统(EGS)用于通过人工形成地热储层的方法从深部低渗透性岩体中开采地热能;国际上常采用水力压裂辅以化学刺激的方法改造EGS 储层以提高其渗透率。本文以采自青海共和盆地的花岗闪长岩样品为对象,选用3种不同化学刺激剂(氢氧化钠、盐酸和土酸),在3组不同注入流速条件下开展了系统化学刺激实验。结果表明:注入盐酸和土酸后样品渗透率均有提高,且采用土酸时渗透率提高幅度明显大于盐酸;但注入氢氧化钠后,样品渗透率反而降低。在3类化学刺激剂中,土酸对长石类矿物的溶蚀能力最强,而氢氧化钠溶液对石英的溶蚀能力最强,但氢氧化钠溶液在溶解岩石样品裂隙表面矿物后极易形成非定形态二氧化硅或非定形态铝硅酸盐蚀变矿物并阻塞裂隙,反而对化学刺激效果造成负面影响。总体来看,土酸是青海共和盆地干热岩体的最佳化学刺激剂。在中等注入速度(3 mL·min-1)条件下,土酸对岩石样品的溶蚀程度就可达到最高;在此基础上进一步降低流速,则可能使溶解组分更易从液相中沉淀而充填于样品裂隙,导致样品渗透率有所下降。 相似文献
16.
Poro‐mechanical and thermo‐mechanical processes change the fracture aperture and thus affect the water flow pattern in the fracture during the cold water injection into enhanced geothermal systems (EGS). In addition, the stresses generated by these processes contribute to the phenomenon of reservoir seismicity. In this paper, we present a three‐dimensional (3D) partially coupled poro‐thermoelastic model to investigate the poroelastic and thermoelastic effects of cold water injection in EGS. In the model, the lubrication fluid flow and the convective heat transfer in the fracture are modeled by the finite element method, while the pore fluid diffusion and heat conductive transfer in the reservoir matrix are assumed to be 3D and modeled by the boundary integral equation method without the need to discretize the reservoir. The stresses at the fracture surface and in the reservoir matrix are obtained from the numerical model and can be used to assess the variation of in situ stress and induced seismicty with injection/extraction. Application of the model shows that rock cooling induces large tensile stresses and increases fracture conductivity, whereas the rock dilation caused by fluid leakoff decreases fracture aperture and increases compressive total stresses around the injection zone. However, increases in pore pressure reduce the effective stresses and can contribute to rock failure, fracture slip, and microseismic activity. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
17.
Microseism Induced by Transient Release of In Situ Stress During Deep Rock Mass Excavation by Blasting 总被引：1，自引：0，他引：1
Jianhua Yang Wenbo Lu Ming Chen Peng Yan Chuangbing Zhou 《Rock Mechanics and Rock Engineering》2013,46(4):859-875
During deep rock mass excavation with the method of drill and blast, accompanying the secession of rock fragments and the formation of a new free surface, in situ stress on this boundary is suddenly released within several milliseconds, which is termed the transient release of in situ stress. In this process, enormous strain energy around the excavation face is instantly released in the form of kinetic energy and it inevitably induces microseismic events in surrounding rock masses. Thus, blasting excavation-induced microseismic vibrations in high-stress rock masses are attributed to the combined action of explosion and the transient release of in situ stress. The intensity of stress release-induced microseisms, which depends mainly on the magnitude of the in situ stress and the dimension of the excavation face, is comparable to that of explosion-induced vibrations. With the methods of time–energy density analysis, amplitude spectrum analysis, and finite impulse response (FIR) digital filter, microseismic vibrations induced by the transient release of in situ stress were identified and separated from recorded microseismic signals during a blast of deep rock masses in the Pubugou Hydropower Station. The results show that the low-frequency component in the microseismic records results mainly from the transient release of in situ stress, while the high-frequency component originates primarily from explosion. In addition, a numerical simulation was conducted to demonstrate the occurrence of microseismic events by the transient release of in situ stress, and the results seem to have confirmed fairly well the separated vibrations from microseismic records. 相似文献
18.
The Dynamic Evaluation of Rock Slope Stability Considering the Effects of Microseismic Damage 总被引：1，自引：1，他引：0
N. W. Xu F. Dai Z. Z. Liang Z. Zhou C. Sha C. A. Tang 《Rock Mechanics and Rock Engineering》2014,47(2):621-642
A state-of-the-art microseismic monitoring system has been implemented at the left bank slope of the Jinping first stage hydropower station since June 2009. The main objectives are to ensure slope safety under continuous excavation at the left slope, and, very recently, the safety of the concrete arch dam. The safety of the excavated slope is investigated through the development of fast and accurate real-time event location techniques aimed at assessing the evolution and migration of the seismic activity, as well as through the development of prediction capabilities for rock slope instability. Myriads of seismic events at the slope have been recorded by the microseismic monitoring system. Regions of damaged rock mass have been identified and delineated on the basis of the tempo-spatial distribution analysis of microseismic activity during the periods of excavation and consolidation grouting. However, how to effectively utilize the abundant microseismic data in order to quantify the stability of the slope remains a challenge. In this paper, a rock mass damage evolutional model based on microseismic data is proposed, combined with a 3D finite element method (FEM) model for feedback analysis of the left bank slope stability. The model elements with microseismic damage are interrogated and the deteriorated mechanical parameters determined accordingly. The relationship between microseismic activities induced by rock mass damage during slope instability, strength degradation, and dynamic instability of the slope are explored, and the slope stability is quantitatively evaluated. The results indicate that a constitutive relation considering microseismic damage is concordant with the simulation results and the influence of rock mass damage can be allowed for its feedback analysis of 3D slope stability. In addition, the safety coefficient of the rock slope considering microseismic damage is reduced by a value of 0.11, in comparison to the virgin rock slope model. Our results demonstrate that microseismic activity induced by construction disturbance only slightly affects the stability of the slope. The proposed feedback analysis technique provides a novel method for dynamically assessing rock slope stability and can be used to assess the slope stability of other similar rock slopes. 相似文献
19.
随着页岩气开采、废水回注和CO2地质封存工程活动的进行,储层应力环境改变诱发地震的问题得到广泛关注,研究储层岩石变形破裂和声发射规律对于理解诱发地震活动具有重要意义。本文选取了页岩、致密砂岩和白云岩开展三轴压缩声发射试验,获取了空间裂缝形态,揭示了不同类型储层岩石的变形破裂过程和声发射特征。结果表明:(1)页岩的扩容应力与峰值应力比最高,其次为白云岩和致密砂岩,表明页岩主要发生脆性破坏。(2)岩石结构对裂缝扩展和强度具有明显影响,页岩层理发育,抗压强度和裂缝形态各向异性显著。当层理角度为0°时,试样发生剪切-拉张复合型破坏。当层理角度为30°和60°时,试样主要发生剪切破坏。当层理角度增大至90°时,试样主要发生拉张破坏。致密砂岩破裂形成剪切主裂缝,白云岩形成两条剪切主裂缝和微裂缝。(3)不同类型储层岩石破裂过程声发射特征差异显著。页岩在扩容应力点附近有少量声发射活动,达到峰值应力时,声发射活动迅速增强。致密砂岩仅在破裂瞬间有少量声发射活动。相比之下,白云岩在裂缝非稳定扩展阶段和峰后阶段声发射活动显著。因此,在工程实践中需要根据微震监测调整施工措施,避免页岩作为储盖层发生脆性破坏和白云岩储层改造诱发地震。 相似文献
20.
SUN Feng HU Haotian ZHAO F YANG Xinran CHEN Zubin WU Haidong ZHANG Linyou 《《地质学报》英文版》2021,95(6):1940-1947
Micro-seismic monitoring is one of the most critical technologies that guide hydraulic fracturing in hot dry rock resource development. Micro-seismic monitoring requires high precision detection of micro-seismic events with a low signal-to-noise ratio. Because of this requirement, we propose a recurrent neural network model named gated recurrent unit and support vector machine (GRU_SVM). The proposed model ensures high accuracy while reducing the parameter number and hardware requirement in the training process. Since micro-seismic events in hot dry rock produce large wave amplitudes and strong vibrations, it is difficult to reverse the onset of each individual event. In this study, we utilize a support vector machine (SVM) as a classifier to improve the micro-seismic event detection accuracy. To validate the methodology, we compare the simulation results of the short-term-average to the long-term-average (STA/LTA) method with GRU_SVM method by using hot dry rock micro-seismic event data in Qinghai Province, China. Our proposed method has an accuracy of about 95% for identifying micro-seismic events with low signal-to-noise ratios. By ignoring smaller micro-seismic events, the detection procedure can be processed more efficiently, which is able to provide a real-time observation on the types of hydraulic fracturing in the reservoirs. 相似文献