首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 468 毫秒
1.
Analysis of shapes of folds, together with other structures such as axial plane foliation boudinage, mullions and cross joints, show that the F1 folds in the ‘main Raialo syncline’ were formed by buckling, and were subsequently modified by flattening normal to the axial planes and lengthening along the axis. The apparent buckle shortening of the F1 folds generally ranges between 70 and 80%. The folds were formed by simple shear (giving place to pure shear at certain stages) in an almost north-south direction on subhorizontal beds. Progressive deformation in the later stage of F1 folding resulted in gentle upright folding of F1 axial planes on F1′ axes slightly oblique to F1. The F2 folds, whose average shortening ranges from 20 to 30%, were also formed by buckling caused by horizontal compression in a nearly northwest-southeast direction. This folding was preceded and followed in some instances by homogeneous strain, as deduced fro mthe shapes of the F2 folds and the nature of variation of the F1 lineations. The F3 conjugate structures developed when the maximum compressive strain was vertical and the intermediate compressive strain northwest-southeast, almost normal to the subvertical F2 axial planes. The increase in the amplitude of the F2 folds in the last phase of F2 folding in certain zones resulted in an excess of vertical load, which dissipated with the formation of the F3 structures. In the last stage of movement (F4) the maximum compressive strain became horizontal along the strike of F2 axial planes, whereas the minimum compressive strain was normal to them. The F4 structures, therefore, point to a longitudinal shortening with reference to large scale F2 folding.  相似文献   

2.
Transpressional deformation has played an important role in the late Neoproterozoic evolution of the ArabianNubian Shield including the Central Eastern Desert of Egypt. The Ghadir Shear Belt is a 35 km-long, NW-oriented brittleductile shear zone that underwent overall sinistral transpression during the Late Neoproterozoic. Within this shear belt, strain is highly partitioned into shortening, oblique, extensional and strike-slip structures at multiple scales. Moreover, strain partitioning is heterogeneous along-strike giving rise to three distinct structural domains. In the East Ghadir and Ambaut shear belts, the strain is pure-shear dominated whereas the narrow sectors parallel to the shear walls in the West Ghadir Shear Zone are simple-shear dominated. These domains are comparable to splay-dominated and thrust-dominated strike-slip shear zones. The kinematic transition along the Ghadir shear belt is consistent with separate strike-slip and thrustsense shear zones. The earlier fabric(S1), is locally recognized in low strain areas and SW-ward thrusts. S2 is associated with a shallowly plunging stretching lineation(L2), and defines ～NW-SE major upright macroscopic folds in the East Ghadir shear belt. F2 folds are superimposed by ～NNW–SSE tight-minor and major F3 folds that are kinematically compatible with sinistral transpressional deformation along the West Ghadir Shear Zone and may represent strain partitioning during deformation. F2 and F3 folds are superimposed by ENE–WSW gentle F4 folds in the Ambaut shear belt. The sub-parallelism of F3 and F4 fold axes with the shear zones may have resulted from strain partitioning associated with simple shear deformation along narrow mylonite zones and pure shear-dominant deformation in fold zones. Dextral ENEstriking shear zones were subsequently active at ca. 595 Ma, coeval with sinistral shearing along NW-to NNW-striking shear zones. The occurrence of upright folds and folds with vertical axes suggests that transpression plays a significant role in the tectonic evolution of the Ghadir shear belt. Oblique convergence may have been provoked by the buckling of the Hafafit gneiss-cored domes and relative rotations between its segments. Upright folds, fold with vertical axes and sinistral strike-slip shear zones developed in response to strain partitioning. The West Ghadir Shear Zone contains thrusts and strikeslip shear zones that resulted from lateral escape tectonics associated with lateral imbrication and transpression in response to oblique squeezing of the Arabian-Nubian Shield during agglutination of East and West Gondwana.  相似文献   

3.
Three major episodes of folding are evident in the Eastern Ghats terrain. The first and second generation folds are the reclined type; coaxial refolding has produced hook-shaped folds, except in massif-type charnockites in which non-coaxial refolding has produced arrow head folds. The third generation folds are upright with a stretching lineation parallel to subhorizontal fold axes. The sequence of fold stylesreclinedF 1and coaxialF 2, clearly points to an early compressional regime and attendant progressive simple shear. Significant subhorizontal extension duringF 3folding is indicated by stretching lineation parallel to subhorizontal fold axes. In the massif-type charnockites low plunges ofF 2folds indicate a flattening type of deformation partitioning in the weakly foliated rocks (magmatic ?). The juxtaposition of EGMB against the Iron Ore Craton of Singhbhum by oblique collision is indicative of a transpressional regime.  相似文献   

4.
The supracrustal enclave within the Peninsular Gneiss in the Honakere arm of the Chitradurga-Karighatta belt comprises tremolite-chlorite schists within which occur two bands of quartzite coalescing east of Jakkanahalli(12°39′N; 76°41′E), with an amphibolite band in the core. Very tight to isoclinal mesoscopic folds on compositional bands cut across in the hinge zones by an axial planar schistosity, and the nearly orthogonal relation between compositional bands and this schistosity at the termination of the tremolite-chlorite schist band near Javanahalli, points to the presence of a hinge of a large-scale, isoclinal early fold (F1). That the map pattern, with an NNE-plunging upright antiform and a complementary synform of macroscopic scale, traces folds 'er generation (F 2),is proved by the varying attitude of both compositional bands (S0) and axial pranar schistosity (S 1), which are effectively parallel in a major part of the area. A crenulation cleavage (S 2) has developed parallel to the axial planes of theF 2 folds at places. TheF 2 folds range usually from open to rarely isoclinal style, with theF 1 andF 2 axes nearly parallel. Evidence of type 3 fold interference is also provided by the map pattern of a quartzite band in the Borikoppalu area to the north, coupled with younging directions from current bedding andS 0 -S 1 inter-relation. Although statistically theF 1 andF 2 linear structures have the same orientation, detailed studies of outcrops and hand specimens indicate that the two may make as high an angle as 90°. Usually, in these instances, theF 1 lineations are unreliable around theF 2 axes, implying that theF 2 folding was by flexural slip. In zones with very tight to almost isoclinalF 2 folding, however, buckling attendant with flattening has caused a spread of theF 1 lineations almost in a plane. Initial divergence in orientation of theF 1 lineations due to extreme flattening duringF 1 folding has also resulted in a variation in the angle between theF 1 andF 2lineations in some instances. Upright later folding (F3) with nearly E-W strike of axial planes has led to warps on schistosity, plunge reversals of theF 1 andF 2 axes, and increase in the angle between theF 1 andF 2 lineations at some places. Large-scale mapping in the Borikoppalu sector, where the supposed Sargur rocks with ENE ‘trend’ abut against the N-‘trending’ rocks of the Dharwar Supergroup, shows a continuity of rock formations and structures across the hinge of a large-scaleF 2 fold. This observation renders the notion, that there is an angular unconformity here between the rocks of the Sargur Group and the Dharwar Supergroup, untenable.  相似文献   

5.
The E-W running Salem-Attur shear zone demarcates the tectonic boundary between Archaean Dharwar Craton in the north and Proterozoic Southern granulite terrane in the south. This study reveals that the shear zone is a low angle thrust. The thrust zone is around 10 m thick and it merges with the main shear zone along the strike. The thrust is developed on charnockite near Odyarpatti, which is retrograded into schists. Further, it is marked by gently dipping mylonitic foliation and subhorizontal lineation. The S-C fabric, mantled porphyroclasts and intragranular faults indicate northeasterly slip along the thrust. Recumbent shear folds SF1 are developed within the thrust zone. The thrust has been folded by late stage F2 fold which has brought variation in the orientation of the mylonitic foliation from subhorizontal to vertical attitude; the mylonitic lineations have been rotated to subvertical orientation also. Additionally, the F2 crenulations and shear cleavages and intersection lineations are superimposed on the mylonitic fabric. Thrusting along the Salem-Attur shear zone is probably the cause for upliftment of the charnockites to the upper crust. Post-upliftment stage has witnessed brittle deformation in the form of development of shear fractures in NNE-SSW and E-W directions. Pseudotachylites are emplaced along these fractures.  相似文献   

6.
Multiple deformation in all the Precambrian metamorphic-migmatitic rocks has been reported from Rajasthan during the last three decades. But, whereas the Aravalli Group and the Banded Gneissic Complex show similarity in the style and sequence of structures in all their details, the rocks of the Delhi Group trace a partly independent trend. Isoclinal folds of the first generation (AF1) in the rocks of the Aravalli Group had gentle westerly plunge prior to later deformations. These folds show reclined, inclined, and upright attitude as a result of coaxial upright folding (AFla). Superposition of upright folds (AF2) of varying tightness, with axial plane striking N to NNE, has resulted in interference patterns of diverse types in the scale of maps, and deformation of earlier planar and linear structures in the scale of hand specimens. The structures of the third generation (AF3) are either open recumbent folds or reclined conjugate folds with axial planes dipping gently towards NE or SW. Structures of the last phase are upright conjugate folds (AF4) with axial planes striking NNE-SSW and E-W. The Banded Gneissic Complex (BGC) underlies the Aravalli Group with a conglomerate horizon at the contact, especially in southern Rajasthan. But, for a major part of central and southern Rajasthan, migmatites representing BGC show a structural style and sequence identical with those in the Aravalli Group. Migmatization, broadly synkinematic with the AF1 folding, suggests extensive remobilization of the basement. Very rare relict fabric athwart to and overprinted by structures of AF, generation provide tangible evidence for a basement. Although the structures of later phases in the rocks of the Delhi Group (DF3 and DF4) match with the late-phase structures in the Aravalli Group (AF3 and AF4), there is a contrast in the structural history of the early stages in the rocks of the two groups. The folds of the first generation in the Delhi Group (DF1) were recumbent to reclined with gentle plunge towards N to NNE or S to SSW. These were followed by coaxial upright folds of varying tightness (DF2). Absence of westerly trending AF1 folds in the Delhi Group, and extreme variation in plunge of the AF2 folds in contrast with the fairly constant plunge of the DF2 folds, provide evidence for an angular unconformity between the Aravalli and the Delhi Groups. Depending on the importance of flattening attendant with and following buckling during AF2 deformation, the lineations of AF1 generation show different patterns. Where the AF1 lineations are distributed in circular cones around AF2 axes because of flexural-slip folding in layered rocks with high viscosity contrast, loci of early lineations indicate that the initial orientation of the AF1 axes were subhorizontal, trending towards N280°. The orientation of the axial planes of the earlier folds has controlled the development of the later folds. In sectors where the AF, axial planes had N-S strike and gentle dips, or E-W strike with gentle to steep dips, nearly E-W horizontal compression during AF2 deformation resulted in well-developed AF2 folds. By contrast, where the AF, axial planes were striking nearly N-S with steep dips, E-W horizontal compression resulted in tightening (flattening) of the already isoclinal AF1 folds, and probably boudinage structures in some instances, without the development of any AF2 folds. A similar situation obtains when DF4 deformation is superposed on earlier structures. Where the dominant S-planes were subhorizontal, N-S compression during DF4 deformation resulted in either chevron folds with E-W striking axial plane or conjugate folds with axial plane striking NE and NW. In zones with S-planes striking E-W and dipping steeply, the N-S compression resulted in flattening of the earlier folds without development of DF4 folds.  相似文献   

7.
The lead-zinc bearing Proterozoic rocks of Zawar, Rajasthan, show classic development of small-scale structures resulting from superposed folding and ductile shearing. The most penetrative deformation structure noted in the rocks is a schistosity (S 1) axial planar to a phase of isoclinal folding (F 1). The lineations which parallel the hinges ofF 1 folds are deformed by a set of folds (F 2) having vertical or very steep axial planes. At many places a crenulation cleavage (S 2) has developed subparallel to the axial planes ofF 2 folds, particularly in the psammopelitic rocks. The plunge and trend ofF 2 folds vary widely over the area. Deformation ofF 2 folds into hook-shaped geometry and development of another set of axial planar crenulation cleavage are the main imprints of the third generation folds (F 3) in the region. In addition to these, there are at least two other sets of cleavage planes with corresponding folds in small scales. More common among these is a set of recumbent and reclined folds (F 4), developed on steeply dipping early-formed planes. Kink bands and associated sharp-hinged folds represent the other set (F 5). Two major refolded folds are recognizable in the map pattern of the Zawar mineralised belt. The larger of the two, the Main Zawar Fold (MZF), shows a broad hook-shaped geometry. The other large-scale structure is the Zawarmala fold, lying south-west of the MZF. Both the major structures show truncation of lithological units along their respective east ‘limbs’, and extreme variation in the width of formations. The MZF is primarily the result of superimposition ofF 3 onF 2.F 1 folds are relatively smaller in scale and are recognizable in the quartzite unit which responded to deformation mainly by buckle shortening. Large-scale pinching-and-swelling that appears in the outcrop pattern seems to be a pre-F2 feature. The structural evolutionary model worked out to explain the chronology of the deformational features and the large-scale out-crop pattern envisages extreme east-west shortening following formation ofF 1 structures, resulting in the formation of tight and isoclinal antiforms (F 2) with pinched-in synforms in between. These latter zones evolved into a number of ductile shear zones (DSZs). The east-west refolding of the large-scaleF 2 isoclinal antiforms seems to be the consequence of a continuous deformation and resultant migration of folds along the DSZs. The main shear zone which wraps the Zawar folds followed a curved path. Because of the penetrative nature of theF 2 movement, the early lineations which were at high angles to the later ones (as is evident in the west of Zawarmala), became subparallel to the trend ofF 2 folding over a large part of the area. Further, the virtually coaxial nature ofF 2 andF 3 folds and the refolding ofF 3 folds by a new set of N-S folds is an indication of continuous progressive deformation.  相似文献   

8.
Recent works suggest Proterozoic plate convergence along the southeastern margin of India which led to amalgamation of the high grade Eastern Ghats belt (EGB) and adjoining fold-and-thrust belts to the East Dhrawar craton. Two major thrusts namely the Vellikonda thrust at the western margin of the Nellore Schist belt (NSB) and the Maidukuru thrust at the western margin of the Nallamalai fold belt (NFB) accommodate significant upper crustal shortening, which is indicated by juxtaposition of geological terranes with distinct tectonostratigraphy, varying deformation intensity, structural styles and metamorphic grade. Kinematic analysis of structures and fabric of the fault zone rocks in these intracontinental thrust zones and the hanging wall and footwall rocks suggest spatially heterogeneous partitioning of strain into various combinations of E-W shortening, top-to-west shear on stratum parallel subhorizontal detachments or on easterly dipping thrusts, and a strike slip component. Although relatively less prominent than the other two components of the strain triangle, non-orthogonal slickenfibres associated with flexural slip folds and mylonitic foliation-stretching lineation orientation geometry within the arcuate NSB and NFB indicate left lateral strike slip subparallel to the overall N-S trend. On the whole an inclined transpression is inferred to have controlled the spatially heterogeneous development of thrust related fabric in the terrane between the Eastern Ghats belt south of the Godavari graben and the East Dharwar craton.  相似文献   

9.
 Conspicuous Nd, Sr and Pb isotopic differences exist between the Archean gneiss terranes adjoining the suture at the Kolar Schist Belt, south India. These gneisses, which are the deformed equivalents of plutonic and volcanic rocks, have known or inferred igneous ages of 2630 to 2530 Ma. Initial isotopic ratios of Nd, Sr and Pb suggest that metaplutonic gneisses west of the Kolar Schist Belt were emplaced into, and variably contaminated by, an evolved continental crust that formed prior to 3200 Ma. Felsic metaigneous gneisses that occur as slivers on the western margin of the schist belt have an isotopic character similar to that of the metaplutonic rocks on the same side of the Kolar Schist Belt. On the east side of the Kolar Schist Belt the isotopic evidence suggests that the 2530 Ma granitic gneisses were not derived from or contaminated by an older continental crust. Their source probably evolved with a Nd isotopic composition similar to that of typical Archean mantle, but became light rare earth element enriched after 2900 to 2700 Ma. The inferred tectonic setting for the west side of the Kolar Schist Belt is an Andean continental magmatic arc. For the east side of the Kolar Schist Belt, a possible Phanerozoic analog is an evolved island arc, such as Japan. Received: 24 June 1994/Accepted: 9 January 1995  相似文献   

10.
Transpressional deformation has played an important role in the late Paleozoic evolution of the western Central Asian Orogenic Belt (CAOB), and understanding the structural evolution of such transpressional zones is crucial for tectonic reconstructions. Here we focus on the transpressional Irtysh Shear Zone with an aim at understanding amalgamation processes between the Chinese Altai and the West/East Junggar. We mapped macroscopic fold structures in the southern Chinese Altai and analyzed their relationships with the development of the adjacent Irtysh Shear Zone. Structural observations from these macroscopic folds show evidence for four generations of folding and associated fabrics. The earlier fabric (S1), is locally recognized in low strain areas, and is commonly isoclinally folded by F2 folds that have an axial plane orientation parallel to the dominant fabric (S2). S2 is associated with a shallowly plunging stretching lineation (L2), and defines ∼NW-SE tight-close upright macroscopic folds (F3) with the doubly plunging geometry. F3 folds are superimposed by ∼NNW-SSE gentle F4 folds. The F3 and F4 folds are kinematically compatible with sinistral transpressional deformation along the Irtysh Shear Zone and may represent strain partitioning during deformation. The sub-parallelism of F3 fold axis with the Irtysh Shear Zone may have resulted from strain partitioning associated with simple shear deformation along narrow mylonite zones and pure shear-dominant deformation (F3) in fold zones. The strain partitioning may have become less efficient in the later stage of transpressional deformation, so that a fraction of transcurrent components was partitioned into F4 folds.  相似文献   

11.
Strongly deformed volcaniclastic metasediments and ophiolitic slices hosting the Sukari gold mineralization display evidence of a complex structural evolution involving three main ductile deformational events (D1–D3). D1 produced ENE-trending folds associated with NNW-propagating thrust slices and intrusion of the Sukari granite (689 ± 3 Ma). D2 formed a moderately to steeply dipping, NNW-trending S2 foliation curved to NE and developed arcuate structure constituting the Kurdeman shear zone (≤ 595 Ma) and East Sukari imbricate thrust belt. Major NE-trending F2 folds, NW-dipping high-angle thrusts, shallow and steeply plunging mineral lineation and shear indicators recorded both subhorizontal and subvertical transport direction during D2. D3 (560–540 Ma) formed NNE-trending S3 crenulation cleavage, tight F3 folds, Sukari Thrust and West Sukari imbricate thrust. The system of NW-trending sinistral Kurdeman shear zone (lateral ramps and tear faults) and imbricate thrusts (frontal ramps) forming the actuate structure developed during SE-directed thrusting, whereas the prevailing pattern of NNE-trending dextral Sukari shear zone and imbricate thrusts forming Sukari thrust duplex developed during NE-directed tectonic shearing. Sukari granite intruded in different pluses between 689 and 540 Ma and associated with at least four phases of quartz veins with different geometry and orientation. Structural analysis of the shear fabrics indicates that the geometry of the mineralized quartz veins and alteration patterns are controlled by the regional NNW- and NE-trending conjugate zones of transpression. Gold-bearing quartz veins are located within NNW-oriented sinistral shear zones in Kurdeman gold mine area, within steeply dipping NW- and SE dipping thrusts and NE- and NS-oriented dextral and sinistral shear zones around Sukari mine area, and along E-dipping backthrusts and NW-SE and N-S fractures in Sukari granite. The high grade of gold mineralization in Sukari is mainly controlled by SE-dipping back-thrusts branched from the major NW-dipping Sukari Thrust. The gold mineralization in Sukari gold mine and neighboring areas in the Central Eastern Desert of Egypt is mainly controlled by the conjugate shear zones of the Najd Fault System and related to E-W directed shortening associated with oblique convergence between East and West Gondwana.  相似文献   

12.
The three-dimensional geometry of spiral inclusion trails from the Canton Schist were measured to determine whether the spirals were a product of porphyroblast rotation within a shear zone, or porphyroblast growth during a series of overprinting fold events. The spiral inclusion trails are composed of three separate, sub-planar inclusion trail surfaces occupying texturally distinct parts of the porphyroblasts. These surfaces are correlated across a >10 km2 area using textural criteria and relative timing. Measured patterns of inclusion trail orientation and asymmetry suggest they did not form by porphyroblast rotation within a non-coaxial shear zone. Rather, the porphyroblasts grew during three successive overprinting fold events (F2–F4), and the spiral inclusion trails represent the accumulated curvature associated with folding of successive axial plane foliations. The data show that spiral garnets are not peculiar to shear zones, and can form by overprinting crenulations and folds. This is consistent with the common occurrence of spiral garnets in multiply-deformed, regionally metamorphosed fold belts.  相似文献   

13.
The patterns of deformed early lineations (L1) over later folds (F2) can be classified into several morphological types depending on the nature of variation of L1 F2 over the folds. The field relations indicate that the folds under consideration are neither shear folds nor parallel folds modified by flattening. The lineation patterns are therefore interpreted in terms of an empirical model of simultaneous buckling and flattening in which it is assumed that (i) the central surface of the folded layer remains a sine curve in transverse profile, (ii) the ratio of rates of buckle shortening to homogeneous strain is proportional to sin 2a, with a as the dip angle and (iii) the progressive deformation is coaxial with the Z-axis of bulk strain parallel to the planar segments of the early folds. The model gives an insight into the relative importance of different physical factors which control the development of dissimilar lineation patterns. Not all lineation patterns are explicable by this simplified model. Thus complex patterns with variable L1 F2 along the fold axis may develop by a progressive rotation of the geometrically defined fold hinge through successive material lines. The theoretical results have been applied to interpret the lineation patterns in Central Rajasthan, India. It is concluded that L1 was initially very close to the E-ESE trending subhorizontal Z-axis of bulk deformation during F2-folding and that the X-axis was subhorizontal or gently plunging with a N-NNE trend.  相似文献   

14.
Granulites are developed in various tectonic settings and during different geological periods, and have been used for continental correlation within supercontinent models. In this context the Balaram-Kui-Surpagla-Kengora granulites of the South Delhi Terrane of the Aravalli Mobile Belt of northwestern India are significant. The granulites occur as shear zone bounded lensoidal bodies within low-grade rocks of the South Delhi Terrane and comprise pelitic and calcareous granulites, a gabbro-norite-basic granulite suite and multiple phases of granites of the Ambaji suite. The granulites have undergone three major phases of folding and shearing. The F1 and F2 folds are coaxial along NE-SW axis, and F3 folds are developed across the former along NW-SE axis. Thus, various types of interference patterns are produced. The granulite facies metamorphism is marked by a spinel–cordierite–garnet–sillimanite–quartz assemblage with melt phase and is synkinematic to the F1 phase of folding. The peak thermobarometric condition is set at ≥850 °C and 5.5–6.8 kb. The granulites have been exhumed through thrusting along multiple ductile shear zones during syn- to post-F2 folding. Late-stage shearing has produced cataclasites and pseudotachylites. Sensitive High Resolution Ion MicroProbe (SHRIMP) U–Pb dating of zircon from pelitic granulites and synkinematically emplaced granites indicate that: (1) the sedimentary succession of the South Delhi Terrane was deposited between 1240 and 860 Ma with detritus derived from magmatic sources with ages between 1620 and 1240 Ma; (2) folding and granulite metamorphism have taken place between ca. 860 and 800 Ma, and exhumation at around ca. 800–760 Ma; and (3) the last phase of granitic activity occurred at ca. 759 Ma. This shows, for the first time, that the granulites of the South Delhi Terrane are much younger than those of the Sandmata Granulite Complex of the northern part of the Aravalli Mobile Belt, the Saussar granulites of the Central India Mobile Belt and the Eastern Ghats Mobile Belt. Instead, they show similarities to the Neoproterozoic granulites of the Circum Indian Orogens that include the East African Orogen (East Africa and Madagascar), the Southern Granulite Terrane of India and much of Sri Lanka. We suggest that the South Delhi Basin probably marks a trace of the proto-Mozambique Ocean in NW India within Gondwana, that closed when the Marwar Craton, arc fragments (Bemarivo Belt in Madagascar and the Seychelles) and components of the Arabian-Nubian Shield collided with the Aravalli-Bundelkhand Protocontinent at ca. 850–750 Ma.  相似文献   

15.
Progressive ductile shearing in the Phulad Shear Zone of Rajasthan, India has produced a complex history of folding, with development of planar, non-planar and refolded sheath folds. There are three generations of reclined folds, F1, F2 and F3, with a striping lineation (L1) parallel to the hinge lines of F1. The planar sheath folds of F1 have long subparallel hinge lines at the flanks joining up in hairpin curves at relatively small apices. L1 swerves harmoniously with the curving of F1 hinge line. There is a strong down-dip mineral lineation parallel to the striping lineation in most places, but intersecting it at apices of first generation sheath folds. Both the striping and the mineral lineation are deformed in U-patterns over the hinges of reclined F2 and F3. Folding of axial surfaces and hinge lines of earlier reclined folds by later folds was accompanied by very large stretching and led to the development of non-planar sheaths. The reclined folds of all the three generations were deformed by a group of subhorizontal folds. Each generation of fold initially grew with the hinge line at a very low angle with the Y-axis of bulk non-coaxial strain and was subsequently rotated towards the down-dip direction of maximum stretching. The patterns of deformed lineations indicate that the stretching along the X-direction was extremely large, much in excess of 6000 percent.  相似文献   

16.
The Arthur Lineament of northwestern Tasmania is a Cambrian (510 ± 10 Ma) high‐strain metamorphic belt. In the south it is composed of metasedimentary and mafic meta‐igneous lithologies of the ‘eastern’ Ahrberg Group, Bowry Formation and a high‐strain part of the Oonah Formation. Regionally, the lineament separates the Rocky Cape Group correlates and ‘western’ Ahrberg Group to its west from the relatively low‐strain parts of the Oonah Formation, and the correlated Burnie Formation, to its east. Early folding and thrusting caused emplacement of the allochthonous Bowry Formation, which is interpreted to occur as a fault‐bound slice, towards the eastern margin of the parautochthonous ‘eastern’ Ahrberg Group metasediments. The early stages of formation of the Arthur Lineament involved two folding events. The first deformation (CaD1) produced a schistose axial‐planar fabric and isoclinal folds synchronous with thrusting. The second deformation (CaD2) produced a coarser schistosity and tight to isoclinal folds. South‐plunging, north‐south stretching lineations, top to the south shear sense indicators, and south‐verging, downward‐facing folds in the Arthur Lineament suggest south‐directed transport. CaF1 and CaF2 were rotated to a north‐south trend in zones of high strain during the CaD2 event. CaD3, later in the Cambrian, folded the earlier foliations in the Arthur Lineament and produced west‐dipping steep thrusts, creating the linear expression of the structure.  相似文献   

17.
The structural geometry of the Anasagar gneiss dome in the axial zone of the South Delhi Fold Belt is controlled by polyphase folding. It is classified as a thrust-related gneiss dome and not as a metamorphic core complex. Four phases of deformation have affected both the gneiss and the enveloping supracrustal rocks. D2 and D3 deformations probably represent early and late stages of a progressive deformation episode in a simple shear regime combined with compression. The contact between the gneiss and the supracrustal rocks is a dislocation plane (thrust) with top-to-east sense of movement which is consistent with the vergence of the D2 folds. The thrust had a ramp-and-flat geometry at depth. At the present level of exposure it is a footwall flat (that is, parallel to the gneissosity in the footwall), but it truncates the bedding of the hanging wall at some places and is parallel at others. The thrusting was probably broadly coeval with the D2 folds and the thrust plane is locally folded by D2. D2 and D3 folds have similar style and orientation as the first and second phases respectively of major folds in the Delhi Supergroup of the South Delhi Fold Belt and these are mutually correlatable. It is suggested that D1 may be Pre-Delhi in age. Available geochronological data indicate that the emplacement of the Anasagar gneiss predated the formation of volcanic rocks in the Delhi Supergroup and also predated the main crust forming event in the fold belt. The Anasagar gneiss and its enveloping supracrustal rocks are probably older than the Delhi Supergroup.  相似文献   

18.
In the history of superposed deformations of the iron formations at the western border of the Kolar Gold Field in S India, an important event was the successive growth of broadly coaxial plane noncylindrical folds in course of a progressive deformation concomitant with development of ductile mesoscopic shear zones. The noncylindrical folds were initiated as active folds by the creation of a buckling instability at successive stages on newly developed foliation surfaces. The nucleation of noncylindrical folds and the subsequent axial-plane folding of the tightened mature folds are explained by the mechanical inhomogeneity of the rocks and the heterogeneous character of strain. The correlation between increasing tightness and increasing noncylindricity of the folds indicates that the initial curvatures of hinge lines were accentuated by an extension parallel to the subhorizontal stretching lineation. From the patterns of deformed lineations over folds of varying tightnesses, it is concluded that the passive accentuation of hinge-line curvatures was mostly achieved when the folds had already become isoclinal or very tight.  相似文献   

19.
A suite of rocks from Borra Carbonate Granulite Complex (BCGC) in the Eastern Ghats granulite belt displays superposed structures and overprinted mineral assemblages that reveal multiple episodes of tectonothermal reworking of the complex under granulite facies condition. Five distinct episodes of deformation (D1, D2, D3, D4 and D5) and four phases of metamorphism (M1, M2, M3 and M4) are recorded. The signature of the earliest tectonothermal event, D1 is a gneissic foliation (S1) denned by segregation of peak granulite facies mineral assemblages corresponding to prograde M1 metamorphism. M2 metamorphic overprint represents an episode of near-isobaric cooling of the complex under a static condition. D2 represents an episode of ductile deformation manifested by isoclinal folding (F2) and associated extensional structures, within a broad framework of coaxial bulk deformation. The present study reveals that D2 took place subsequent to M2 - Subsequent deformation, D3, produced F3 folds and also deformations of boudins formed during D2. M3, which is synchronous with F3, represents a near isothermal decompression of the BCGC. This was followed by a weak structural readjustment (D4), producing E-W cross folds. The latter was not, however, associated with any recognizable petrological reworking. In the terminal events, deformation (D5) and mineral reactions (M4) were localized along narrow intersecting shear zones. The latter acted as channelways for carbonic and still later hydrous fluid infiltration. The available thermobarometric data from BCGC and other areas of the Eastern Ghats belt reveal that reworking during M2 and M3 ensued in a thermally perturbed regime. The high thermal regime might also have persisted during carbonic fluid infiltration related to terminal reworking (M4).  相似文献   

20.
Detailed field-structural mapping of Neoproterozoic basement rocks exposed in the Wadi Yiba area, southern Arabian Shield, Saudi Arabia illustrates an important episode of late Neoproterozoic transpression in the southern part of the Arabian-Nubian Shield (ANS). This area is dominated by five main basement lithologies: gneisses, metavolcanics, Ablah Group (meta-clastic and marble units) and syn- and post-tectonic granitoids. These rocks were affected by three phases of deformation (D1–D3). D1 formed tight to isoclinal and intrafolial folds (F1), penetrative foliation (S1), and mineral lineation (L1), which resulted from early E-W (to ENE-WSW) shortening. D2 deformation overprinted D1 structures and was dominated by transpression and top-to-the-W (?WSW) thrusting as shortening progressed. Stretching lineation trajectories, S-C foliations, asymmetric shear fabrics and related mylonitic foliation, and flat-ramp and duplex geometries further indicate the inferred transport direction. The N- to NNW-orientation of both “in-sequence piggy-back thrusts” and axial planes of minor and major F2 thrust-related overturned folds also indicates the same D2 compressional stress trajectories. The Wadi Yiba Shear Zone (WYSZ) formed during D2 deformation. It is one of several N-S trending brittle-ductile Late Neoproterozoic shear zones in the southern part of the ANS. Shear sense indicators reveal that shearing during D2 regional-scale transpression was dextral and is consistent with the mega-scale sigmoidal patterns recognized on Landsat images. The shearing led to the formation of the WYSZ and consequent F2 shear zone-related folds, as well as other unmappable shear zones in the deformed rocks. Emplacement of the syn-tectonic granitoids is likely to have occurred during D2 transpression and occupied space created during thrust propagation. D1 and D2 structures are locally overprinted by mesoscopic- to macroscopic-scale D3 structures (F3 folds, and L3 crenulation lineations and kink bands). F3 folds are frequently open and have steep to subvertical axial planes and axes that plunge ENE to ESE. This deformation may reflect progressive convergence between East and West Gondwana.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号